aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm
Commit message (Collapse)AuthorAge
* [ARM] 3585/1: AT91RM9200 Platform devicesAndrew Victor2006-06-19
| | | | | | | | | | | | | | | | | | | | | | | | Patch from Andrew Victor This patch updates the platform device support for the AT91RM9200. The changes include: 1. USB Host device renamed to "at91_ohci" since the driver is also usable on the AT91SAM9261 processor. 2. Enabling multidrive on the USB Device's pullup pin should not be done for all boards. Moved into board-specific files. [Patch from David Brownell] 3. Move enabling of PCMCIA/Compact Flash pins out of the driver. 4. Added SPI device and resources. 5. Added Watchdog device and resources. [Patch from David Brownell] 6. Added UART device and resources. 7. The simple devices (watchdog, rtc, i2c) are now automatically registered and don't have to be registered separately in each board-specific file. [Patch from David Brownell] Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3584/1: AT91RM9200 GPIO suspend/resume supportAndrew Victor2006-06-19
| | | | | | | | | | | | Patch from Andrew Victor This patch adds suspend/resume/set_wake support for the AT91RM9200's GPIO interrupts. Original patch from David Brownell. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3583/1: AT91RM9200 IRQ suspend/resume supportAndrew Victor2006-06-19
| | | | | | | | | | Patch from Andrew Victor Added suspend/resume/set_wake support for the AT91RM9200's AIC interrupt controller. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3582/1: AT91RM9200 IRQ trigger typesAndrew Victor2006-06-19
| | | | | | | | | | | | | Patch from Andrew Victor The AIC interrupt controller's set_irq_type() can also be used for internal interrupts. IRQT_LOW and IRQT_FALLING are the only options not supported for the internal interrupts. [Original patch from Karl Olsen] Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3581/1: AT91RM9200 Internal SRAMAndrew Victor2006-06-19
| | | | | | | | | | Patch from Andrew Victor This patch maps the AT91RM9200's internal SRAM into the virtual memory address space - just below the internal peripheral registers. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3580/1: AT91RM9200 Timer suspend/resume supportAndrew Victor2006-06-19
| | | | | | | | | Patch from Andrew Victor Added suspend/resume support for the AT91RM9200 timer. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3579/1: AT91RM9200 Timer simplificationAndrew Victor2006-06-19
| | | | | | | | | | | | | | | Patch from Andrew Victor Use a global variable 'last_crtr' to store the time of the last timer tick instead of the ST_RTAR register. It's faster, frees up the ST_RTAR register for other uses, and hopefully makes the code more understandable. [Patch from Peter Menzebach] Also add the SA_TIMER flag to Timer IRQ. (It seems to be required for the realtime preempt patch). Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3578/1: AT91RM9200 Clock updateAndrew Victor2006-06-19
| | | | | | | | | | | | | | | | | Patch from Andrew Victor Some updates to the clock infrastructure for the AT91RM9200. 1. Hard-coded values replaced with names defined in at91rm9200_sys.h. 2. Added the four PIO clocks, which are enabled at startup. 3. At startup, disable all unused clocks. 4. Minor bugfix for usage counts associated with MCK. [Patch from David Brownell] 5. Added at91_clock_associate() function to associate device & function with a particular clock. [Patch from David Brownell] Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3559/1: S3C2442: core and serial portBen Dooks2006-06-18
| | | | | | | | | | | Patch from Ben Dooks Core support for the Samsung S3C2442, and the serial port driver update to allow the serial port blocks to be used. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3557/1: S3C24XX: centralise and cleanup uart registrationBen Dooks2006-06-18
| | | | | | | | | | | | | Patch from Ben Dooks All the S3C24XX based devices currently have similar uart blocks, in the same location. Make the process of adding new uart blocks easier by commonising the device definitions and adding a new init function for the cpu code. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3558/1: SMDK24XX: LED platform devicesBen Dooks2006-06-18
| | | | | | | | | Patch from Ben Dooks Platform devices for the LEDs on all the SMDK24XX boards Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3534/1: add spi support to lubbock platformDavid Brownell2006-06-18
| | | | | | | | | | | | | | | | Patch from David Brownell This adds the platform device for SSP/SPI controller, and declares the ads7846 device hooked up to it. Not all Lubbock boards appear to populate the connector needed to use this instead of the ucb1400 chip, but it can always be used as a temperature sensor. In short, this is probably most useful as an example of how to provide the configuration data used by the pxa2xx_spi driver. (Last tested against a slightly earlier version of that driver.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3554/1: ARM: Fix dyntick lockingTony Lindgren2006-06-18
| | | | | | | | | | Patch from Tony Lindgren This patch fixes some dyntick locking issues on ARM as pointed out by Russell King. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3553/1: S3C24XX: earlier print of cpu idcode infoBen Dooks2006-06-18
| | | | | | | | | | | Patch from Ben Dooks Move the printk of the CPU information and IDCODE before the checking of the table entry validity to aide in debugging new cpu entries. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3551/1: S3C24XX: PM code failes to compile with CONFIG_DCACHE_WRITETHROUGHBen Dooks2006-06-18
| | | | | | | | | | | | | | Patch from Ben Dooks If CONFIG_CPU_DCACHE_WRITETHOUGH is set, then the S3C24XX PM code fails to compile, as there is no need to flush the D-cache, the flush function arm920_flush_kern_cache_all() is not compiled. Fix the code to not use this if the config is set. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3550/1: OSIRIS: fix serial port map for 1:1Ben Dooks2006-06-18
| | | | | | | | | | | Patch from Ben Dooks The default serial port-mapping for the Osiris has the port 2 mapped onto the first serial port, and no port1. Correct this so port 1 is port. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3548/1: Fix the ARMv6 CPU id in compressed/head.SCatalin Marinas2006-06-18
| | | | | | | | | | | Patch from Catalin Marinas This code was still using the old format for the ARMv6 CPU id and it wasn't flushing the caches on the MPCore CPU (and other ARM1176 cores). The patch changes the mask bits to cope with the new id format. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3335/1: Old-abi Thumb sys_syscall brokenPaul Brook2006-06-18
| | | | | | | | | | | | | | | | Patch from Paul Brook The old-abi sys_syscall syscall is broken when called from Thumb mode. It assumes the syscall number is an Arm syscall number (ie. starts from __NR_OABI_SYSCALL_BASE). In thumb mode syscall numbers start from zero. The patch below fixes this by clearing the nigh bits of the syscall number instead of inverting them. Technically this means we accept some invalid syscall numbers, but I can't see how that could be a problem. The two sets of numbers far apart that unimplemented syscalls should still be rejected. Signed-off-by: Paul Brook <paul@codesourcery.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3467/1: [3/3] Support for Philips PNX4008 platform: defconfigVitaly Wool2006-06-18
| | | | | | | | | | | Patch from Vitaly Wool This patch adds default configuration file PNX4008 ARM platform. It\'s basically the same as the previos one. Signed-off-by: Vitaly Wool <vwool@ru.mvista.com> Signed-off-by: Dmitry Pervushin <dpervushin@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3466/1: [2/3] Support for Philips PNX4008 platform: chip supportVitaly Wool2006-06-18
| | | | | | | | | | | | Patch from Vitaly Wool This patch adds basic chip support for PNX4008 ARM platform. It's basically the same as the previous one, but with the rmk's comments taken into account. Signed-off-by: Vitaly Wool <vwool@ru.mvista.com> Signed-off-by: Dmitry Pervushin <dpervushin@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3405/1: lpd7a40x: CPLD ssp driverMarc Singer2006-06-18
| | | | | | | | | | Patch from Marc Singer Driver for operating SSP devices through LPD7A40X CPLD chip. This driver is used by the audio codecs. Signed-off-by: Marc Singer <elf@buici.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3404/1: lpd7a40x: AMBA CLCD supportMarc Singer2006-06-18
| | | | | | | | | | Patch from Marc Singer Board support and LCD panel configurations to integrate lh7a40x's with the amba clcd driver. Signed-off-by: Marc Singer <elf@buici.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3403/1: lpd7a40x: updated default configurationsMarc Singer2006-06-18
| | | | | | | | | Patch from Marc Singer Revised default configuration files. Signed-off-by: Marc Singer <elf@buici.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3401/1: lpd7a40x: platform updateMarc Singer2006-06-18
| | | | | | | | | | Patch from Marc Singer Updates to the lpd7a40x_platform files. Includes support for new architecture, lpd7a400. Signed-off-by: Marc Singer <elf@buici.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3400/1: lpd7a40x: platform headers updateMarc Singer2006-06-18
| | | | | | | | | | Patch from Marc Singer Updates to the lpd7a40x platform headers. Includes support for new architecture, lpd7a400. Signed-off-by: Marc Singer <elf@buici.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2006-06-12
|\ | | | | | | | | | | | | | | * master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] Fix Integrator and Versatile interrupt initialisation [ARM] 3546/1: PATCH: subtle lost interrupts bug on i.MX [ARM] 3547/1: PXA-OHCI: Allow platforms to specify a power budget [ARM] Fix Neponset IRQ handling
| * [ARM] Fix Integrator and Versatile interrupt initialisationRussell King2006-06-10
| | | | | | | | | | | | | | | | | | | | Both Integrator and Versatile were using set_irq_handler() and enable_irq(), and working around the initialisation of the chained interrupt, instead of the more correct set_irq_chained_handler() function. Fix Integrator and Versatile to use the right function, and remove these work-arounds. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [ARM] 3546/1: PATCH: subtle lost interrupts bug on i.MXMatt Reimer2006-06-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Matt Reimer There is a subtle bug in the GPIO interrupt status register handling in arch/arm/mach-imx/irq.c:imx_gpio_ack_irq(). The documentation states that a 1 should be written to the relevant bit to acknowledge a GPIO interrupt, but that is not what the code does. The problem is that the |= writes back 1s for all the *other* interrupts represented in the register, so interrupts could get lost. For example, if interrupts are pending for GPIO B10 and B12, ISR_B would have the value 0x00001400. Then when the interrupt code handles GPIO B10, it eventually calls imx_gpio_ack_irq(IRQ_GPIOB(10)), which effectively does this: ISR_B |= 1 << 10; with the result that (0x00001400 | 0x00000400) is written, clearing the interrupt status bits for *both* GPIO B10 and B12. The fix is to write 1s only for the interrupts we want to clear. The same problem seems to be occurring in the DMA code; this patch does not address those issues. Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Matt Reimer <mreimer@vpop.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [ARM] 3547/1: PXA-OHCI: Allow platforms to specify a power budgetRichard Purdie2006-06-08
| | | | | | | | | | | | | | | | | | | | | | Patch from Richard Purdie Add a power budget variable to the PXA OHCI platform data and add a default value for the spitz platform(s) which prevents known failures with certain USB devices. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [ARM] Fix Neponset IRQ handlingRussell King2006-06-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While testing the genirq code on ARM, a condition was found whereby the Neponset IRQ handler was being re-entered, causing the system to deadlock. Under the ARM IRQ code, this would not have been a visible problem because the "simple" IRQ handling had no re-entrancy protection. Resolve this by acknowledging the parent interrupt after we mask it when we are going to handle one of our "special" level-based sources (from ethernet or USAR chip.) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | [PATCH] ep93xx build fixLennert Buytenhek2006-06-08
|/ | | | | | | | | | | | | | | From: Lennert Buytenhek <buytenh@wantstofly.org> The recent renaming of m48t86's ->readb() and ->writeb() platform driver methods (2d7b20c1884777e66009be1a533641c19c4705f6) to ->readbyte() and ->writebyte() to fix the ia64 build broke the build of the cirrus ep93xx ARM platform. This patch fixes it up. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [ARM] 3543/1: [Fwd: PXA270 bootparams address not set]Steve Yang2006-06-05
| | | | | | | | | | | Patch from Steve Yang MACHINE_START struct doesn't have any bootargs location for the mainstone. Result is no kernel command args get passed; no serial driver is selected for console and results in a silent boot failure. Signed-off-by: Steve Yang <steve.yang@windriver.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Trivial typo fixesEgry Gabor2006-06-04
| | | | | | | Trivial typo fixes in Kconfig files (ARM). Signed-off-by: Egry Gabor <gaboregry@t-online.hu> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3540/1: ixp23xx: deal with gap in interrupt bitmasksLennert Buytenhek2006-06-02
| | | | | | | | | | | | | | | | | | | Patch from Lennert Buytenhek On the ixp23xx, the microengine thread interrupt sources are numbered 56..119, but their mask/status bits are located in bit positions 64..127 in the various registers in the interrupt controller (bit positions 56..63 are unused.) We don't deal with this, so currently, when asked to enable IRQ 64, we will enable IRQ 56 instead. The only interrupts >= 64 are the thread interrupt sources, and there are no in-tree users of those yet, so this is fortunately not a big problem, but this needs fixing anyway. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [PATCH] ARM: Fix XScale PMD settingDeepak Saxena2006-05-31
| | | | | | | | | | | | The ARM Architecture Reference Manual lists bit 4 of the PMD as "implementation defined" and it must be set to zero on Intel XScale CPUs or the cache does not behave properly. Found by Mike Rapoport while debugging a flash issue on the PXA255: http://marc.10east.com/?l=linux-arm-kernel&m=114845287600782&w=1 Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ARM: explicitly disable BTB on ixp2350Deepak Saxena2006-05-30
| | | | | | | | | | | | We don't enable the BTB on the ixp2350 as that can cause weird crashes (erratum #42.) However, some bootloaders enable the BTB, which means that we have to disable the BTB explicitly. Found thanks to Tom Rini. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [ARM] 3530/1: PXA Mainstone: prevent double enable_irq() in pcmciaThomas Gleixner2006-05-17
| | | | | | | | | | | Patch from Thomas Gleixner The mainstone board pcmcia interrupt have been enabled via setup_irq() and the following socket check calls enable_irq again. Set the NOAUTOEN flag so the interrupt is not automatically enabled in setup_irq() Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3529/1: s3c24xx: fix restoring control register with undefined instructionDimitry Andric2006-05-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Dimitry Andric In arch/arm/mach-s3c2410/sleep.S, the coprocessor registers are saved at suspend time, and restored at resume time. However, an undefined instruction is used when attempting to restore a non-existent "auxiliary control register". This leads to a crash on S3C2412, which has an ARM926 core instead of an ARM920. At suspend time, the following fragment runs: mrc p15, 0, r7, c2, c0, 0 @ translation table base address mrc p15, 0, r8, c2, c0, 0 @ auxiliary control register mrc p15, 0, r9, c1, c0, 0 @ control register and at resume time, the following fragment runs: mcr p15, 0, r7, c2, c0, 0 @ translation table base mcr p15, 0, r8, c1, c1, 0 @ auxilliary control ... mcr p15, 0, r9, c1, c0, 0 @ turn on MMU, etc There are several problems with these fragments: 1. The ARM920 and ARM926 cores don't have any "auxiliary control register", at least not according to the ARM920 and ARM926 TRM's. 2. The 2nd line of suspend erroneously saves the c2 register again. 3. This saved c2 value is restored using an undefined instruction. For some reason this does not crash on ARM920, but does crash on ARM926. The following patch fixes all these problems. Signed-off-by: Dimitry Andric <dimitry@andric.com> Yes, this looks sensible Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] arch/arm/kernel/dma-isa.c: named initializersAdrian Bunk2006-05-16
| | | | | | | | | | This patch converts struct dma_resources to named initializers. Besides fixing a compile error in -mm, it didn't sound like a bad idea. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Alexander Schulz <alex@shark-linux.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3527/1: MPCore Boot Lockup FixHarry Fearnhamm2006-05-16
| | | | | | | | | | Patch from Harry Fearnhamm This patch fixes the occasional lockup seen in early boot stage on RealView MPCore system. Signed-off-by: Harry Fearnhamm <Harry.Fearnhamm@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] arch/arm/kernel/process.c: Fix warningRussell King2006-05-16
| | | | | | arch/arm/kernel/process.c:314: warning: assignment makes integer from pointer without a cast Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3526/1: ioremap should use vunmap instead of vfree on ARMCatalin Marinas2006-05-16
| | | | | | | | | | Patch from Catalin Marinas This patch modifies the __ioremap_pfn and __iounmap functions in arch/arm/mm/ioremap.c to use vunmap instead of vfree. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3524/1: ARM EABI: more 64-bit aligned stack fixesNicolas Pitre2006-05-16
| | | | | | | | | | Patch from Nicolas Pitre Assembly code that calls C code must ensure the C code sees a 64-bit aligned stack pointer. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3517/1: move definition of PROC_INFO_SZ from procinfo.h to asm-offsets.hUwe Zeisberger2006-05-16
| | | | | | | | | | | Patch from Uwe Zeisberger The symbol is only used in arch/arm/kernel/head-common.S. This in turn is included from arch/arm/kernel/head.S and arch/arm/kernel/head-nommu.S which include asm-offsets.h . Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3508/1: Update collie defconfigPavel Machek2006-05-09
| | | | | | | | | | Patch from Pavel Machek Update collie defconfig to something that can bring closer-to-working system to its user. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Fix thread struct allocator for SMP caseRussell King2006-05-09
| | | | | | | | The ARM thread struct allocator is racy on SMP systems. Fix it by turning it into a per-cpu based allocator. This also allows keeps the cache cache warm for thread structs and kernel stacks. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Update mach-typesRussell King2006-05-08
| | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Update versatile_defconfigRussell King2006-05-08
| | | | | | | Update versatile default configuration, enabling the AACI sound driver, VFP and Versatile AB support. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3507/1: Replace map_desc.physical with map_desc.pfn: aaed2000Bellido Nicolas2006-05-07
| | | | | | | | | Patch from Bellido Nicolas aaed2000 map_desc.pfn conversion Signed-off-by: Nicolas Bellido <ml@acolin.be> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3504/1: Fix clcd includes for aaec2000Bellido Nicolas2006-05-07
| | | | | | | | | | | | Patch from Bellido Nicolas Since this patch: [ARM] 3366/1: Allow the 16bpp mode configuration in the CLCD control register linux/amba/bus.h needs to be included before linux/amba/clcd.h Signed-off-by: Nicolas Bellido <ml@acolin.be> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-20 13:35:42 -0500