aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/plat-orion
Commit message (Collapse)AuthorAge
* genirq: replace irq_gc_ack() with {set,clr}_bit variants (fwd)Simon Guinot2011-07-07
| | | | | | | | | | | | | | | | | | | | | | | | This fixes a regression introduced by e59347a "arm: orion: Use generic irq chip". Depending on the device, interrupts acknowledgement is done by setting or by clearing a dedicated register. Replace irq_gc_ack() with some {set,clr}_bit variants allows to handle both cases. Note that this patch affects the following SoCs: Davinci, Samsung and Orion. Except for this last, the change is minor: irq_gc_ack() is just renamed into irq_gc_ack_set_bit(). For the Orion SoCs, the edge GPIO interrupts support is currently broken. irq_gc_ack() try to acknowledge a such interrupt by setting the corresponding cause register bit. The Orion GPIO device expect the opposite. To fix this issue, the irq_gc_ack_clr_bit() variant is used. Tested on Network Space v2. Reported-by: Joey Oravec <joravec@drewtech.com> Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* Merge branch 'devel-stable' into for-linusRussell King2011-05-23
|\ | | | | | | | | | | Conflicts: arch/arm/Kconfig arch/arm/mach-ns9xxx/include/mach/uncompress.h
| * ARM: dove: Consolidate mpp code with platform mpp.Andrew Lunn2011-05-16
| | | | | | | | | | Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
| * ARM: orion: Refactor the MPP code common in the orion platformAndrew Lunn2011-05-16
| | | | | | | | | | | | | | | | | | | | mv78xx0 and kirkwood use identical mpp code. It should also be possible to rewrite the orion5x mpp to use this platform code. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
| * ARM: orion: Consolidate setup of the crypto engine.Andrew Lunn2011-05-16
| | | | | | | | | | Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
| * ARM: orion: Consolidate SATA platform setup.Andrew Lunn2011-05-16
| | | | | | | | | | Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
| * ARM: orion: Consolidate USB platform setup code.Andrew Lunn2011-05-16
| | | | | | | | | | Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
| * ARM: orion: Consolidate the XOR platform setup code.Andrew Lunn2011-05-16
| | | | | | | | | | Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
| * ARM: orion: Consolidate the platform data setup for the watchdog.Andrew Lunn2011-05-16
| | | | | | | | | | Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
| * ARM: orion: Consolidate SPI initialization.Andrew Lunn2011-05-16
| | | | | | | | | | | | | | | | This change removes the interrupt resource. The driver does not use it. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
| * ARM: orion: Consolidate I2C initialization.Andrew Lunn2011-05-16
| | | | | | | | | | Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
| * ARM: orion: Consolidate ethernet platform dataAndrew Lunn2011-05-16
| | | | | | | | | | Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
| * ARM: orion: Consolidate the creation of the RTC platform data.Andrew Lunn2011-05-16
| | | | | | | | | | Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
| * ARM: orion: Consolidate the creation of the uart platform data.Andrew Lunn2011-05-16
| | | | | | | | | | Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
| * arm: orion: Use generic irq chipThomas Gleixner2011-05-16
| | | | | | | | | | | | | | | | | | | | The core interrupt chip is a straight forward conversion. The gpio chip is implemented with two instances of the irq_chip_type which can be switched with the irq_set_type function. That allows us to use the generic callbacks and avoids the conditionals in them. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
* | clocksource: convert ARM 32-bit down counting clocksourcesRussell King2011-05-23
|/ | | | | | | | | | | | | Convert SP804, MXC, Nomadik and Orion 32-bit down-counting clocksources to generic mmio clocksource infrastructure. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Lennert Buytenhek <kernel@wantstofly.org> Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* arm: Fold irq_set_chip/irq_set_handlerThomas Gleixner2011-03-29
| | | | | | Use irq_set_chip_and_handler() instead. Converted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* arm: Reorder irq_set_ function callsThomas Gleixner2011-03-29
| | | | | | | | | | | | | | | | | | | | Reorder irq_set_chip() irq_set_chip_data() irq_set_handler() to irq_set_chip() irq_set_handler() irq_set_chip_data() so the next patch can combine irq_set_chip() and irq_set_handler() to irq_set_chip_and_handler(). Automated conversion with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* arm: Cleanup the irq namespaceThomas Gleixner2011-03-29
| | | | | | Convert to the new function names. Automated with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* arm: Cleanup irq_desc accessThomas Gleixner2011-03-29
| | | | | | Use the proper wrappers and use the flow type in irq_data. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* ARM: Remove dependency of plat-orion GPIO code on mach directory includes.Lennert Buytenhek2011-03-03
| | | | | | | | | | | | This patch makes the various mach dirs that use the plat-orion GPIO code pass in GPIO-related platform info (GPIO controller base address, secondary base IRQ number, etc) explicitly, instead of having plat-orion get those values by including a mach dir include file -- the latter mechanism is problematic if you want to support multiple ARM platforms in the same kernel image. Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
* ARM: Remove dependency of plat-orion time code on mach directory includes.Lennert Buytenhek2011-03-03
| | | | | | | | | | | This patch makes the various mach dirs that use the plat-orion time code pass in timer and bridge addresses explicitly, instead of having plat-orion get those values by including a mach dir include file -- the latter mechanism is problematic if you want to support multiple ARM platforms in the same kernel image. Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
* ARM: plat-orion: irq_data conversion.Lennert Buytenhek2011-01-13
| | | | | Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Acked-by: Nicolas Pitre <nico@fluxnic.net>
* ARM: orion: convert sched_clock() to use new infrastructureRussell King2010-12-22
| | | | | | | | Convert orion platforms to use the new sched_clock() infrastructure for extending 32bit counters to full 64-bit nanoseconds. Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: ensure all sched_clock() implementations are notrace markedRussell King2010-12-22
| | | | | | | | | | | | | | | | ftrace requires sched_clock() to be notrace. Ensure that all implementations are so marked. Also make sure that they include linux/sched.h Also ensure OMAP clocksource read functions are marked notrace as they're used for sched_clock() too. Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Will Deacon <will.deacon@arm.com> Tested-by: Mikael Pettersson <mikpe@it.uu.se> Tested-by: Eric Miao <eric.y.miao@gmail.com> Tested-by: Olof Johansson <olof@lixom.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: orion: update clock source registrationRussell King2010-12-22
| | | | | | | | | In d7e81c2 (clocksource: Add clocksource_register_hz/khz interface) new interfaces were added which simplify (and optimize) the selection of the divisor shift/mult constants. Switch over to using this new interface. Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Kirkwood: restrict the scope of the PCIe reset workaroundNicolas Pitre2010-10-21
| | | | | | | | | | | | | | | Commit 21f0ba90a447 "orion/kirkwood: reset PCIe unit on boot" made the reset of the PCIe unit unconditional. While this may fix problems on some targets, this also causes problems on other targets. Saeed Bishara <saeed@marvell.com> said about the original problem: "We couln't pinpoint the root cause of this issue, actually we failed to reproduce that issue." So let's restrict the reset of the PCIe unit only to the target where the original problem was observed. Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
* Merge branch 'for-linus' of ↵Linus Torvalds2010-08-07
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (214 commits) ALSA: hda - Add pin-fix for HP dc5750 ALSA: als4000: Fix potentially invalid DMA mode setup ALSA: als4000: enable burst mode ALSA: hda - Fix initial capsrc selection in patch_alc269() ASoC: TWL4030: Capture route runtime DAPM ordering fix ALSA: hda - Add PC-beep whitelist for an Intel board ALSA: hda - More relax for pending period handling ALSA: hda - Define AC_FMT_* constants ALSA: hda - Fix beep frequency on IDT 92HD73xx and 92HD71Bxx codecs ALSA: hda - Add support for HDMI HBR passthrough ALSA: hda - Set Stream Type in Stream Format according to AES0 ALSA: hda - Fix Thinkpad X300 so SPDIF is not exposed ALSA: hda - FIX to not expose SPDIF on Thinkpad X301, since it does not have the ability to use SPDIF ASoC: wm9081: fix resource reclaim in wm9081_register error path ASoC: wm8978: fix a memory leak if a wm8978_register fail ASoC: wm8974: fix a memory leak if another WM8974 is registered ASoC: wm8961: fix resource reclaim in wm8961_register error path ASoC: wm8955: fix resource reclaim in wm8955_register error path ASoC: wm8940: fix a memory leak if wm8940_register return error ASoC: wm8904: fix resource reclaim in wm8904_register error path ...
| * orion/kirkwood: add audio functions.apatard@mandriva.com2010-05-31
| | | | | | | | | | | | | | | | | | This patch add audio related definitions and functions Signed-off-by: Arnaud Patard <apatard@mandriva.com> Acked-by: Nicolas Pitre <nico@fluxnic.net> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | [ARM] orion/kirkwood: reset PCIe unit on bootOlaf Rempel2010-07-16
|/ | | | | | | | | | | | | | | | | | | | Patch found in QNAPs vendor source package, with some cleanups (proper defines, shortened max. timeout from 1s to 200ms). Without this patch the PCIe SATA controller (Marvell 88sx7042/sata_mv) in my QNAP TS-419P (Marvell 88f6281/Kirkwood) stops working after a few minutes. The symptomes are described in this thread: http://marc.info/?l=linux-ide&m=124822863706181&w=2 [ Note: this is a workaround in need of a better analysis/solution -- NP ] Acked-by: Saeed Bishara <saeed@marvell.com> Tested-by: Bernhard R. Link <brl@pcpool00.mathematik.uni-freiburg.de> Seconded-by: Martin Michlmayr <tbm@cyrius.com> I'm_not_very_happy_with_it-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
* mtd: orion/kirkwood: add RnB line support to orion mtd driverBen Dooks2010-05-13
| | | | | | | | Add support for a board to register a callback to get the state of the RnB line if it has it attached. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* [ARM] Orion: fix PCIe inbound window programming when RAM size is not a ↵Lennert Buytenhek2009-12-28
| | | | | | | | | | | power of two The PCIe inbound window size is supposed to be a power of two. If the total amount of RAM installed in the system is not a power of two, round it up such that it is. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
* [ARM] Kirkwood: __init requires linux/init.hMartin Michlmayr2009-08-24
| | | | | | | | | | | | | | | | Include linux/init.h for __init to fix this error: CC [M] drivers/net/wireless/wl12xx/boot.o In file included from arch/arm/mach-kirkwood/include/mach/gpio.h:13, from arch/arm/include/asm/gpio.h:5, from include/linux/gpio.h:7, from drivers/net/wireless/wl12xx/boot.c:24: arch/arm/plat-orion/include/plat/gpio.h:32: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘orion_gpio_init’ make[6]: *** [drivers/net/wireless/wl12xx/boot.o] Error 1 make[5]: *** [drivers/net/wireless/wl12xx] Error 2 Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
* [ARM] Orion/Kirkwood: rename orion5x_wdt to orion_wdtNicolas Pitre2009-06-08
| | | | | | | | | The Orion watchdog driver is also used on Kirkwood. Convention is to use orion5x for stuff specific to 88F5xxx Orion chips and simply "orion" for shared stuff across SoCs including Kirkwood. Signed-off-by: Nicolas Pitre <nico@marvell.com>
* [ARM] orion: convert gpio to use gpiolibErik Benada2009-06-08
| | | | | | | | Signed-off-by: Erik Benada <erikbenada@yahoo.ca> [ nico: fix locking, additional cleanups ] Signed-off-by: Nicolas Pitre <nico@marvell.com>
* [ARM] orion: make sure sched_clock() usage of cnt32_to_63() is safeNicolas Pitre2009-06-08
| | | | | | | | | | With a TCLK = 200MHz, the half period of the hardware timer is roughly 10 seconds. Because cnt32_to_63() must be called at least once per half period of the base hardware counter, it is a bit risky to rely solely on scheduling to generate frequent enough calls. Let's use a kernel timer to ensure this. Signed-off-by: Nicolas Pitre <nico@marvell.com>
* [ARM] orion: sched_clock implementation for orion platformsStefan Agner2009-06-08
| | | | | | | | | | | sched_clock implementation for orion platform. Its realized using free-running clocksource timer, which provides a resolution of 7.5ns (depending on tclk). It's derived from PXA's sched_clock implementation. [ nico: renamed orion2ns to tclk2ns, fixed max value in the comment ] Signed-off-by: Stefan Agner <stefan.agner@yahoo.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
* Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2009-04-24
|\ | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 5460/1: Orion: reduce namespace pollution [ARM] 5458/1: pcmcia: pxa2xx-sharpsl: check if we do have Scoop config [ARM] 5457/1: mach-imx gpio buildfix [ARM] 5456/1: add sys_preadv and sys_pwritev [ARM] pxa/pcm990: start external GPIOs immediately after built-in ones [ARM] pxa/palm27x: General fix for Palm27x aSoC driver [ARM] pxa/mioa701: use GPIO95 as AC97 reset line [ARM] pxa: merge AC97 platform data structures [ARM] pxa/magician: remove un-necessary #include of pxa-regs.h and hardware.h
| * [ARM] 5460/1: Orion: reduce namespace pollutionNicolas Pitre2009-04-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Symbols like SOFT_RESET are way too generic to be exported at large. To avoid this, let's move the mbus bridge register defines into a separate file and include it where needed. This affects mach-kirkwood, mach-loki, mach-mv78xx0 and mach-orion5x simultaneously as they all share code in plat-orion which relies on those defines. Some other defines have been moved to narrower scopes, or simply deleted when they had no user. This fixes compilation problem with mpt2sas on the above listed platforms. Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | clocksource: pass clocksource to read() callbackMagnus Damm2009-04-21
|/ | | | | | | | | | | | | | Pass clocksource pointer to the read() callback for clocksources. This allows us to share the callback between multiple instances. [hugh@veritas.com: fix powerpc build of clocksource pass clocksource mods] [akpm@linux-foundation.org: cleanup] Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: John Stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'origin' into develRussell King2009-03-28
|\ | | | | | | | | Conflicts: sound/soc/pxa/pxa2xx-i2s.c
| * [WATCHDOG] orion5x_wdt: fix compile issue by providing tclk as platform dataThomas Reitmayr2009-03-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The orion5x-wdt driver is now registered as a platform device and receives the tclk value as platform data. This fixes a compile issue cause by a previously removed define "ORION5X_TCLK". Signed-off-by: Thomas Reitmayr <treitmayr@devbase.at> Acked-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Kristof Provost <kristof@sigsegv.be> Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Martin Michlmayr <tbm@cyrius.com> Cc: Sylver Bruneau <sylver.bruneau@googlemail.com> Cc: Kunihiko IMAI <bak@d2.dion.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* | [ARM] Kirkwood: SDIO driver registration for DB6281 and RD6281Nicolas Pitre2009-02-26
| | | | | | | | Signed-off-by: Nicolas Pitre <nico@marvell.com>
* | [ARM] Orion: make gpio /input/output validation separateNicolas Pitre2009-02-19
|/ | | | | | | | Especially on Kirkwood, a couple GPIOs are actually only output capable. Let's separate the ability to configure a GPIO as input or output to accommodate this restriction. Signed-off-by: Nicolas Pitre <nico@marvell.com>
* [ARM] 5401/1: Orion: fix edge triggered GPIO interrupt supportNicolas Pitre2009-02-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The GPIO interrupts can be configured as either level triggered or edge triggered, with a default of level triggered. When an edge triggered interrupt is requested, the gpio_irq_set_type method is called which currently switches the given IRQ descriptor between two struct irq_chip instances: orion_gpio_irq_level_chip and orion_gpio_irq_edge_chip. This happens via __setup_irq() which also calls irq_chip_set_defaults() to assign default methods to uninitialized ones. The problem is that irq_chip_set_defaults() is called before the irq_chip reference is switched, leaving the new irq_chip (orion_gpio_irq_edge_chip in this case) with uninitialized methods such as chip->startup() causing a kernel oops. Many solutions are possible, such as making irq_chip_set_defaults() global and calling it from gpio_irq_set_type(), or calling __irq_set_trigger() before irq_chip_set_defaults() in __setup_irq(). But those require modifications to the generic IRQ code which might have adverse effect on other architectures, and that would still be a fragile arrangement. Manually copying the missing methods from within gpio_irq_set_type() would be really ugly and it would break again the day new methods with automatic defaults are added. A better solution is to have a single irq_chip instance which can deal with both edge and level triggered interrupts. It is also a good idea to switch the IRQ handler instead, as the edge IRQ handler allows for one edge IRQ event to be queued as the IRQ is actually masked only when that second IRQ is received, at which point the hardware can queue an additional IRQ event, making edge triggered interrupts a bit more reliable. Tested-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge branch 'cpus4096-for-linus-2' of ↵Linus Torvalds2009-01-02
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'cpus4096-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (66 commits) x86: export vector_used_by_percpu_irq x86: use logical apicid in x2apic_cluster's x2apic_cpu_mask_to_apicid_and() sched: nominate preferred wakeup cpu, fix x86: fix lguest used_vectors breakage, -v2 x86: fix warning in arch/x86/kernel/io_apic.c sched: fix warning in kernel/sched.c sched: move test_sd_parent() to an SMP section of sched.h sched: add SD_BALANCE_NEWIDLE at MC and CPU level for sched_mc>0 sched: activate active load balancing in new idle cpus sched: bias task wakeups to preferred semi-idle packages sched: nominate preferred wakeup cpu sched: favour lower logical cpu number for sched_mc balance sched: framework for sched_mc/smt_power_savings=N sched: convert BALANCE_FOR_xx_POWER to inline functions x86: use possible_cpus=NUM to extend the possible cpus allowed x86: fix cpu_mask_to_apicid_and to include cpu_online_mask x86: update io_apic.c to the new cpumask code x86: Introduce topology_core_cpumask()/topology_thread_cpumask() x86: xen: use smp_call_function_many() x86: use work_on_cpu in x86/kernel/cpu/mcheck/mce_amd_64.c ... Fixed up trivial conflict in kernel/time/tick-sched.c manually
| * cpumask: convert struct clock_event_device to cpumask pointers.Rusty Russell2008-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | Impact: change calling convention of existing clock_event APIs struct clock_event_timer's cpumask field gets changed to take pointer, as does the ->broadcast function. Another single-patch change. For safety, we BUG_ON() in clockevents_register_device() if it's not set. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Ingo Molnar <mingo@elte.hu>
* | [ARM] Orion: share GPIO IRQ handling codeLennert Buytenhek2008-12-20
| | | | | | | | | | | | | | Split off Orion GPIO IRQ handling code into plat-orion/. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
* | [ARM] Orion: share GPIO handling codeLennert Buytenhek2008-12-20
| | | | | | | | | | | | | | | | Split off Orion GPIO handling code into plat-orion/, and add support for multiple sets of (32) GPIO pins. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
* | Merge branch 'omap3-upstream' of ↵Russell King2008-12-15
|\| | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into devel
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-19 02:37:53 -0500