aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/plat-omap/i2c.c
Commit message (Collapse)AuthorAge
* ARM: OMAP: Fix i2c cmdline initcall for multiplatformTony Lindgren2013-01-11
| | | | | | | | | | | | We only want this initcall to run when the kernel is booted on omap SoCs. Fix the issue by initializing the the initcall from separately for omap1 and omap2+. This fixes the issue for omap2+ multiplatform configs as we are using omap_subsys_initcall there. Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP: Remove unnecessary mach and plat includesTony Lindgren2012-11-02
| | | | | | | | | | Now mach/hardware.h is empty for omap2+ and can be removed except for plat-omap/dmtimer.c for omap1. Also the include of mach/irqs.h can now be removed for shared plat-omap/i2c.c as it's no longer needed. Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP: Fix relative includes for shared i2c.h fileTony Lindgren2012-10-31
| | | | | | | | | | | | | | | As discussed on linux-arm-kernel, we want to avoid relative includes for the arch/arm/*omap* shared code: http://www.spinics.net/lists/linux-omap/msg80520.html To fix this for the shared i2c.h, let's re-introduce a minimal plat/i2c.h. Note that drivers must not use this header as it will break build for omap2+ CONFIG_MULTIPLATFORM builds. Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP: Make plat-omap/i2c.c port checks localTony Lindgren2012-10-31
| | | | | | | | | | | | | | The common code should not have any omap1 or omap2+ specific code, and should not need to call the cpu_is_omap macros. The only remaining user for cpu_is_omap macros is omap_i2c_nr_ports(). Let's make those checks in the omap specific implementation of omap_i2c_add_bus() instead in order to remove cpu_is_omap usage from the common code. Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2Tony Lindgren2012-10-18
| | | | | | | | | | | | | | | | We want to remove plat/cpu.h. To do this, let's first split it to private soc.h to mach-omap1 and mach-omap2. We have to keep plat/cpu.h around until the remaining drivers are fixed, so let's include the local soc.h in plat/cpu.h and for drivers still including plat/cpu.h. Once the drivers are fixed not to include plat/cpu.h, we can remove the file. This is needed for the ARM common zImage support. [tony@atomide.com: updated to not print a warning] Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP: Split plat-omap/i2c.c into mach-omap1 and mach-omap2Tony Lindgren2012-10-17
| | | | | | | | | | | | | There's no need to keep the device related things in the common i2c.c as omap2+ is using hwmod. Split the code to mach-omap1 and mach-omap2 parts and only leave common code to plat-omap/i2c.c. Note that as omap1 only has one i2c controller, we can now remove the old device related macros. Reviewed-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linuxLinus Torvalds2012-10-10
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull i2c-embedded changes from Wolfram Sang: "The changes for i2c-embedded include: - massive rework of the omap driver - massive rework of the at91 driver. In fact, the old driver gets removed; I am okay with this approach since the old driver was depending on BROKEN and its limitations made it practically unusable, so people used bitbanging instead. But even if there are users, there is no platform_data or module parameter which would need to be converted. It is just another driver doing I2C transfers, just way better. Modifications of arch/arm/at91 related files have proper acks from the maintainer. - new driver for R-Car I2C - devicetree and generic_clock conversions and fixes - usual driver fixes and changes. The rework patches have come a long way and lots of people have been involved in creating/testing them. Most patches have been in linux-next at least since 3.6-rc5. A few have been added in the last week, I have to admit. An unexpected (but welcome :)) peak in private life is the cause for that. The "late" patches shouldn't cause any merge conflicts and I will have a special eye on them during the stabilization phase. This is an exception and I want to have the patches in place properly in time again for the next kernels." * 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (44 commits) MXS: Implement DMA support into mxs-i2c i2c: add Renesas R-Car I2C driver i2c: s3c2410: use clk_prepare_enable and clk_disable_unprepare ARM: OMAP: convert I2C driver to PM QoS for MPU latency constraints i2c: nomadik: Add Device Tree support to the Nomadik I2C driver i2c: algo: pca: Fix chip reset function for PCA9665 i2c: mpc: Wait for STOP to hit the bus i2c: davinci: preparation for switch to common clock framework omap-i2c: fix incorrect log message when using a device tree i2c: omap: sanitize exit path i2c: omap: switch over to autosuspend API i2c: omap: remove unnecessary pm_runtime_suspended check i2c: omap: switch to threaded IRQ support i2c: omap: remove redundant status read i2c: omap: get rid of the "complete" label i2c: omap: resize fifos before each message i2c: omap: simplify IRQ exit path i2c: omap: always return IRQ_HANDLED i2c: omap: simplify errata check i2c: omap: bus: add a receiver flag ...
| * ARM: OMAP: convert I2C driver to PM QoS for MPU latency constraintsJean Pihet2012-10-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert the driver from the outdated omap_pm_set_max_mpu_wakeup_lat API to the new PM QoS API. Since the constraint is on the MPU subsystem, use the PM_QOS_CPU_DMA_LATENCY class of PM QoS. The resulting MPU constraints are used by cpuidle to decide the next power state of the MPU subsystem. The I2C device latency timing is derived from the FIFO size and the clock speed and so is applicable to all OMAP SoCs. Signed-off-by: Jean Pihet <j-pihet@ti.com> Acked-by: Shubhrajyoti D <shubhrajyoti@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
* | ARM: OMAP1: Make plat/mux.h omap1 onlyTony Lindgren2012-09-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We are moving omap2+ to use the device tree based pinctrl-single.c and will be removing the old mux framework. This will remove the omap1 specific parts from plat-omap. Acked-by: Felipe Balbi <balbi@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-usb@vger.kernel.org Cc: linux-pcmcia@lists.infradead.org Cc: spi-devel-general@lists.sourceforge.net Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: OMAP1: Define OMAP1_INT_I2C locallyTony Lindgren2012-09-12
|/ | | | | | This is needed to start removing hardcoded IRQs for omap2+. Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP: I2C: Fix omap_register_i2c_bus() return value on successLaurent Pinchart2011-11-04
| | | | | | | | | | | | | | | | | | Commit 4d17aeb1c5b2375769446d13012a98e6d265ec13 ("OMAP: I2C: split device registration and convert OMAP2+ to omap_device") makes omap2_i2c_add_bus() return a pointer to an omap_device instead on success instead of 0. This breaks the omap_register_i2c_bus() ABI and results in the igep0020 board code detecting an I2C bus registration error when there is none. Fix the problem by using PTR_RET() instead of PTR_ERR() in omap2_i2c_add_bus(). Reported-by: Alexander Kinzer <a.kinzer@plusoptix.de> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [tony@atomide.com: updated to return pdev instead of od] Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge branch 'next/cleanup2' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds2011-11-01
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'next/cleanup2' of git://git.linaro.org/people/arnd/arm-soc: (31 commits) ARM: OMAP: Warn if omap_ioremap is called before SoC detection ARM: OMAP: Move set_globals initialization to happen in init_early ARM: OMAP: Map SRAM later on with ioremap_exec() ARM: OMAP: Remove calls to SRAM allocations for framebuffer ARM: OMAP: Avoid cpu_is_omapxxxx usage until map_io is done ARM: OMAP1: Use generic map_io, init_early and init_irq arm/dts: OMAP3+: Add mpu, dsp and iva nodes arm/dts: OMAP4: Add a main ocp entry bound to l3-noc driver ARM: OMAP2+: l3-noc: Add support for device-tree ARM: OMAP2+: board-generic: Add i2c static init ARM: OMAP2+: board-generic: Add DT support to generic board arm/dts: Add support for OMAP3 Beagle board arm/dts: Add initial device tree support for OMAP3 SoC arm/dts: Add support for OMAP4 SDP board arm/dts: Add support for OMAP4 PandaBoard arm/dts: Add initial device tree support for OMAP4 SoC ARM: OMAP: omap_device: Add a method to build an omap_device from a DT node ARM: OMAP: omap_device: Add omap_device_[alloc|delete] for DT integration of: Add helpers to get one string in multiple strings property ARM: OMAP2+: devices: Remove all omap_device_pm_latency structures ... Fix up trivial header file conflicts in arch/arm/mach-omap2/board-generic.c
| * ARM: OMAP2+: devices: Remove all omap_device_pm_latency structuresBenoit Cousson2011-10-04
| | | | | | | | | | | | | | | | Remove all these duplicated structures since a default one is now available. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
* | Merge branch 'next/cleanup' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds2011-11-01
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'next/cleanup' of git://git.linaro.org/people/arnd/arm-soc: (125 commits) ARM: mach-mxs: fix machines' initializers order mmc: mxcmmc: explicitly includes mach/hardware.h arm/imx: explicitly includes mach/hardware.h in pm-imx27.c arm/imx: remove mx27_setup_weimcs() from mx27.h arm/imx: explicitly includes mach/hardware.h in mach-kzm_arm11_01.c arm/imx: remove mx31_setup_weimcs() from mx31.h ARM: tegra: devices.c should include devices.h ARM: tegra: cpu-tegra: unexport two functions ARM: tegra: cpu-tegra: sparse type fix ARM: tegra: dma: staticify some tables and functions ARM: tegra: tegra2_clocks: don't export some tables ARM: tegra: tegra_powergate_is_powered should be static ARM: tegra: tegra_rtc_read_ms should be static ARM: tegra: tegra_init_cache should be static ARM: tegra: pcie: 0 -> NULL changes ARM: tegra: pcie: include board.h ARM: tegra: pcie: don't cast __iomem pointers ARM: tegra: tegra2_clocks: 0 -> NULL changes ARM: tegra: tegra2_clocks: don't cast __iomem pointers ARM: tegra: timer: don't cast __iomem pointers ... Fix up trivial conflicts in arch/arm/mach-omap2/Makefile, arch/arm/mach-u300/{Makefile.boot,core.c} arch/arm/plat-{mxc,omap}/devices.c
| * OMAP: omap_device: when building return platform_device instead of omap_deviceKevin Hilman2011-09-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All of the device init and device driver interaction with omap_device is done using platform_device pointers. To make this more explicit, have omap_device return a platform_device pointer instead of an omap_device pointer. All current users of the omap_device pointer were only using it to get at the platform_device pointer or struct device pointer, so fixing all of the users was trivial. This also makes it more difficult for device init code to directly access members of struct omap_device, and allows for easier changing of omap_device internals. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
* | I2C: OMAP1: set i2c unit feature implementation flags in platform dataAndy Green2011-10-29
| | | | | | | | | | | | | | | | | | | | | | | | Most of the OMAP1 implementation flags are set statically, with the exception that omap7xx has its data bus wired up differently. Cc: patches@linaro.org Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andy Green <andy.green@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kevin Hilman <khilman@ti.com>
* | I2C: OMAP2+: Pass flags up to omap i2c platform_data as wellAndy Green2011-10-29
| | | | | | | | | | | | | | | | | | | | | | | | This is how the driver can find the flags for its implementation functionality in its platform_data Cc: patches@linaro.org Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andy Green <andy.green@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kevin Hilman <khilman@ti.com>
* | I2C: OMAP2+: Pass hwmod rev knowledge via platform_data when i2c bus addedAndy Green2011-10-29
| | | | | | | | | | | | | | | | | | | | | | | | Mark each OMAP I2C bus with the hwmod's knowledge of which I2C IP version is in the chip we're running on. Cc: patches@linaro.org Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andy Green <andy.green@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kevin Hilman <khilman@ti.com>
* | I2C: OMAP1: set IP revision in platform dataAndy Green2011-10-29
|/ | | | | | | | | | | | | | All OMAP1 are using "IP revision 1" in terms of register layout. We set this information in omap1_i2c_add_bus() so we don't have to use cpu_is_xxx() any more in the omap i2c driver. Cc: patches@linaro.org Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andy Green <andy.green@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kevin Hilman <khilman@ti.com>
* arm: omap: i2c: fix compile warningFelipe Balbi2011-01-27
| | | | | | | | | | | Fix the following compile warning: arch/arm/plat-omap/i2c.c:120:13: warning: 'omap_pm_set_max_mpu_wakeup_lat_compat' defined but not used arch/arm/plat-omap/i2c.c:125:38: warning: 'omap_i2c_latency' defined but not used Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* I2C: i2c-omap: Change device name: i2c_omap -> omap_i2cBenoit Cousson2010-12-20
| | | | | | | | | | | | | | | | | The convention for omap device naming is omap_XXX. Rename the device and driver name in order to stick to this naming convention. Change device name in clock nodes as well. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Ben Dooks <ben-i2c@fluff.org> Acked-by: Paul Walmsley <paul@pwsan.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: Fix undefined reference to omap2_i2c_mux_pinsTony Lindgren2010-12-07
| | | | | | | | | In some cases we can get error function `omap2_i2c_add_bus': arch/arm/plat-omap/i2c.c:136: undefined reference to `omap2_i2c_mux_pins' arch/arm/plat-omap/i2c.c:141: undefined reference to `omap_hwmod_lookup' arch/arm/plat-omap/i2c.c:157: undefined reference to `omap_device_build' Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP1: I2C: fix device initializationPaul Walmsley2010-12-07
| | | | | | | | | | | | | | | | | | | | | | Commit 4d17aeb1c5b2375769446d13012a98e6d265ec13 ("OMAP: I2C: split device registration and convert OMAP2+ to omap_device") broke I2C on OMAP1. The following messages appear at boot: i2c_omap i2c_omap.1: failure requesting irq 0 i2c_omap: probe of i2c_omap.1 failed with error -22 Investigation revealed that a chunk of code is missing from the original plat-omap/i2c.c file which configured the IRQ and base address for the I2C block on OMAP1. Upon adding this back, the OMAP1 I2C block seems to initialize correctly. Thanks to Cory Maccarrone <darkstar6262@gmail.com> for reporting the bug, and apologies for the breakage. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Tested-by: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP: I2C: split device registration and convert OMAP2+ to omap_devicePaul Walmsley2010-11-09
| | | | | | | | | | | | | Split the OMAP1 and OMAP2+ platform_device build and register code. Convert the OMAP2+ variant to use omap_device. This patch was developed in collaboration with Rajendra Nayak <rnayak@ti.com>. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* OMAP: PM constraints: add return values; add requesting device param to ↵Paul Walmsley2010-07-26
| | | | | | | | | | | | | | | | | | | | omap_pm_set_max_dev_wakeup_lat() Add return values to the PM constraint functions. This allows the PM core to provide feedback to the caller if a constraint is not possible. Update the one upstream user of omap_pm_set_max_mpu_wakeup_lat() to add a compatibility wrapper, needed until the driver is changed. Update some of the documentation to conform more closely to kerneldoc style. Add an additional device parameter to omap_pm_set_max_dev_wakeup_lat() to identify the device requesting the constraint. This is so repeated calls to omap_pm_set_max_dev_wakeup_lat() with the same requesting device can override the device's previously-set constraint. Also, it allows the PM core to make a decision as to whether or not the constraint should be satisfied, based on the caller's identity. Signed-off-by: Paul Walmsley <paul@pwsan.com>
* omap4: Add support for i2c initTony Lindgren2010-05-20
| | | | | | | | | Add support for i2c init for omap4. This patch is based on and earlier patch by Santosh Shilimkar <santosh.shilimkar@ti.com>. Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: Fix i2c platform init code for omap4Tony Lindgren2010-05-20
| | | | | | | | | | | | Add separate omap_i2c_add_bus functions for mach-omap1 and mach-omap2. Make the mach-omap2 init set the interrupt dynamically to support. This is needed to add support for omap4 in a way that works with multi-omap builds. This will eventually get fixed in a generic way with the omap hwmods. Signed-off-by: Tony Lindgren <tony@atomide.com>
* i2c-omap: add mpu wake up latency constraint in i2cKalle Jokiniemi2010-05-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While waiting for completion of the i2c transfer, the MPU could hit OFF mode and cause several msecs of delay that made i2c transfers fail more often. The extra delays and subsequent re-trys cause i2c clocks to be active more often. This has also an negative effect on power consumption. Created a mechanism for passing and using the constraint setting function in driver code. The used mpu wake up latency constraints are now set individually per bus, and they are calculated based on clock rate and fifo size. Thanks to Jarkko Nikula, Moiz Sonasath, Paul Walmsley, and Nishanth Menon for tuning out the details of this patch. Updates by Kevin as requested by Tony: - Remove omap_set_i2c_constraint_func() in favor of conditionally adding the flag in omap_i2c_add_bus() in order to keep all the OMAP conditional checking in a single location. - Update set_mpu_wkup_lat prototypes to match OMAP PM layer so OMAP PM function can be used directly in pdata. Cc: Moiz Sonasath <m-sonasath@ti.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
* omap: i2c: Fix muxing for command line enabled busJarkko Nikula2010-02-25
| | | | | | | | | | | | The commit b63128e81214cc2db2995d690438055c26d213a5 broke the pin muxing for I2C busses that are enabled from the kernel command line. Fix this by defining the board registration function omap_register_i2c_bus in common platform code as it was before but keep the muxing in architecture dependent files. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap3: Replace ARCH_OMAP34XX with ARCH_OMAP3Tony Lindgren2010-02-15
| | | | | | Replace ARCH_OMAP34XX with ARCH_OMAP3 Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap2: Convert ARCH_OMAP24XX to ARCH_OMAP2Tony Lindgren2010-02-15
| | | | | | Convert ARCH_OMAP24XX to ARCH_OMAP2 Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: Split i2c platform init for mach-omap1 and mach-omap2Tony Lindgren2009-12-11
| | | | | | | | | | | | Otherwise we cannot limit new mux code to mach-omap2. The same signal names should eventually work for other omaps under mach-omap2. Note that these pins don't need to be OMAP_PIN_INPUT_PULLUP, just OMAP_PIN_INPUT is enough. Cc: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: headers: Move remaining headers from include/mach to include/platTony Lindgren2009-10-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the remaining headers under plat-omap/include/mach to plat-omap/include/plat. Also search and replace the files using these headers to include using the right path. This was done with: #!/bin/bash mach_dir_old="arch/arm/plat-omap/include/mach" plat_dir_new="arch/arm/plat-omap/include/plat" headers=$(cd $mach_dir_old && ls *.h) omap_dirs="arch/arm/*omap*/ \ drivers/video/omap \ sound/soc/omap" other_files="drivers/leds/leds-ams-delta.c \ drivers/mfd/menelaus.c \ drivers/mfd/twl4030-core.c \ drivers/mtd/nand/ams-delta.c" for header in $headers; do old="#include <mach\/$header" new="#include <plat\/$header" for dir in $omap_dirs; do find $dir -type f -name \*.[chS] | \ xargs sed -i "s/$old/$new/" done find drivers/ -type f -name \*omap*.[chS] | \ xargs sed -i "s/$old/$new/" for file in $other_files; do sed -i "s/$old/$new/" $file done done for header in $(ls $mach_dir_old/*.h); do git mv $header $plat_dir_new/ done Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP: Update contact address of I2C registration helperJarkko Nikula2009-05-25
| | | | | | | This email address is going to expire soon so update it. Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP: Add method to register additional I2C busses on the command line, v2Jarkko Nikula2009-03-23
| | | | | | | | | | | | | This patch extends command line option "i2c_bus=bus_id,clkrate" so that it allow to register additional I2C busses that are not registered with omap_register_i2c_bus from board initialization code. Purpose of this is to register additional board busses which are routed to external connectors only without any on board I2C devices. Cc: linux-i2c@vger.kernel.org Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP: Add command line option for I2C bus speed, v2Jarkko Nikula2009-03-23
| | | | | | | | | | | | | | | This patch adds a new command line option "i2c_bus=bus_id,clkrate" into I2C bus registration helper. Purpose of the option is to override the default board specific bus speed which is supplied by the omap_register_i2c_bus. The default bus speed is typically set to speed of slowest I2C chip on the bus and overriding allow to use some experimental configurations or updated chip versions without any kernel modifications. Cc: linux-i2c@vger.kernel.org Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP: Add documentation for function omap_register_i2c_busJarkko Nikula2009-03-23
| | | | | Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* [ARM] fix AT91, davinci, h720x, ks8695, msm, mx2, mx3, netx, omap1, omap2, ↵Russell King2009-01-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | pxa, s3c arch/arm/mach-at91/at91cap9.c:337: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91rm9200.c:301: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91sam9260.c:351: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91sam9261.c:287: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91sam9263.c:312: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91sam9rl.c:304: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-h720x/h7202-eval.c:38: error: implicit declaration of function 'IRQ_CHAINED_GPIOB' arch/arm/mach-ks8695/devices.c:46: error: 'KS8695_IRQ_WAN_RX_STATUS' undeclared here (not in a function) arch/arm/mach-msm/devices.c:28: error: 'INT_UART1' undeclared here (not in a function) arch/arm/mach-mx2/devices.c:233: error: 'MXC_GPIO_IRQ_START' undeclared here (not in a function) arch/arm/mach-mx3/devices.c:128: error: 'MXC_GPIO_IRQ_START' undeclared here (not in a function) arch/arm/mach-omap1/mcbsp.c:140: error: 'INT_730_McBSP1RX' undeclared here (not in a function) arch/arm/mach-omap1/mcbsp.c:165: error: 'INT_McBSP1RX' undeclared here (not in a function) arch/arm/mach-omap1/mcbsp.c:200: error: 'INT_McBSP1RX' undeclared here (not in a function) arch/arm/mach-omap2/board-apollon.c:286: error: implicit declaration of function 'omap_set_gpio_direction' arch/arm/mach-omap2/mcbsp.c:154: error: 'INT_24XX_MCBSP1_IRQ_RX' undeclared here (not in a function) arch/arm/mach-omap2/mcbsp.c:181: error: 'INT_24XX_MCBSP1_IRQ_RX' undeclared here (not in a function) arch/arm/mach-pxa/e350.c:36: error: 'IRQ_BOARD_START' undeclared here (not in a function) arch/arm/plat-s3c/dev-i2c0.c:32: error: 'IRQ_IIC' undeclared here (not in a function) ... Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: OMAP3: Add OMAP34xx pin multiplexing into I2C bus registration helperJarkko Nikula2008-12-10
| | | | | | | | - Simplify function omap_i2c_mux_pins - Add OMAP34xx pin multiplexing for busses 1 - 3 Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/machRussell King2008-08-07
| | | | | | This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Eliminate useless includes of asm/mach-types.hRussell King2008-08-07
| | | | | | | | There are 43 includes of asm/mach-types.h by files that don't reference anything from that file. Remove these unnecessary includes. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: OMAP: Add helper module for board specific I2C bus registrationJarkko Nikula2008-02-08
This helper module simplifies I2C bus registration for different OMAP platforms by doing registration in one place only and to allow board specific bus configuration like clock rate and number of busses configured. Helper should cover OMAP processors from first to third generation. This patch just adds the feature and current implementation cleanup and board file modifications will be done in following patches. Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>