aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-orion5x
Commit message (Collapse)AuthorAge
* Merge branch 'for-2.6.27' of git://git.marvell.com/mv643xx_eth into ↵Jeff Garzik2008-07-29
|\ | | | | | | upstream-fixes
| * mv643xx_eth: use auto phy polling for configuring (R)(G)MII interfaceLennert Buytenhek2008-07-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The mv643xx_eth hardware has a provision for polling the PHY's MII management registers to obtain the (R)(G)MII interface speed (10/100/1000) and duplex (half/full) and pause (off/symmetric) settings to use to talk to the PHY. The driver currently does not make use of this feature. Instead, whenever there is a link status change event, it reads the current link parameters from the PHY, and programs those parameters into the mv643xx_eth MAC by hand. This patch switches the mv643xx_eth driver to letting the MAC auto-determine the (R)(G)MII link parameters by PHY polling, if there is a PHY present. For PHYless ports (when e.g. the (R)(G)MII interface is connected to a hardware switch), we keep hardcoding the MII interface parameters. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
* | [ARM] 5179/1: Replace obsolete IRQT_* and __IRQT_* values with IRQ_TYPE_*Dmitry Baryshkov2008-07-27
|/ | | | | | | | | | | | | | | | | | | | IRQT_* and __IRQT_* were obsoleted long ago by patch [3692/1]. Remove them completely. Sed script for the reference: s/__IRQT_RISEDGE/IRQ_TYPE_EDGE_RISING/g s/__IRQT_FALEDGE/IRQ_TYPE_EDGE_FALLING/g s/__IRQT_LOWLVL/IRQ_TYPE_LEVEL_LOW/g s/__IRQT_HIGHLVL/IRQ_TYPE_LEVEL_HIGH/g s/IRQT_RISING/IRQ_TYPE_EDGE_RISING/g s/IRQT_FALLING/IRQ_TYPE_EDGE_FALLING/g s/IRQT_BOTHEDGE/IRQ_TYPE_EDGE_BOTH/g s/IRQT_LOW/IRQ_TYPE_LEVEL_LOW/g s/IRQT_HIGH/IRQ_TYPE_LEVEL_HIGH/g s/IRQT_PROBE/IRQ_TYPE_PROBE/g s/IRQT_NOEDGE/IRQ_TYPE_NONE/g Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Orion: LED support for HP mv2120Martin Michlmayr2008-07-07
| | | | | | | | | | | The HP mv2120 has several LEDs that are controlled through gpio. Export the health LED, the red SATA LEDs as well as two gpios that control the brightness of _all_ LEDs to userland. The Ethernet and power LEDs can't be controlled through gpio and the blue SATA LEDs are handled via the SATA driver. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
* [ARM] Orion: add RD88F5181L-FXO supportNicolas Pitre2008-07-07
| | | | | | | | This patch adds support for the Marvell Orion-VoIP RD-88F5181L-FXO Reference Design, and enables use of the ethernet, USB, Cardbus and mini-PCIe ports. Signed-off-by: Nicolas Pitre <nico@marvell.com>
* [ARM] Orion: add RD88F5181L-GE supportLennert Buytenhek2008-07-07
| | | | | | | | This patch adds support for the Marvell Orion-VoIP RD2-88F5181L-GE Reference Design, and enables use of the ethernet, USB, Cardbus and mini-PCIe ports. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
* [ARM] Orion: add Netgear WNR854T supportImre Kaloz2008-07-07
| | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
* [ARM] Orion: make PCI handling code deal with Cardbus slotsLennert Buytenhek2008-06-30
| | | | | | | | | | | | | | | | The Cardbus connector does not have an IDSEL signal, and Cardbus cards are always the intended target of configuration transactions on their local PCI bus. This means that if the Orion's PCI bus signals are hooked up to a Cardbus slot, the same set of PCI functions will will appear 31 times, for each of the PCI device IDs 1-31 (ID 0 is the host bridge). This patch adds a function to the Orion PCI handling code that board support code can call to enable Cardbus mode. When Cardbus mode is enabled, configuration transactions on the PCI local bus are only allowed to PCI IDs 0 (host bridge) and 1 (cardbus device). Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
* [ARM] Orion: fix for tsx09-common.c compilation problemSylver Bruneau2008-06-30
| | | | | | | | In some cases, compilation of the tsx09 common file was failing due to an incomplete list of includes. Signed-off-by: Sylver Bruneau <sylver.bruneau@googlemail.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
* [ARM] Orion: correctly load mv2120 RTC driverMartin Michlmayr2008-06-30
| | | | | | | | | | After Jean Delvare's change "i2c: Convert most new-style drivers to use module aliasing" (3760f736716f74bdc62a4ba5406934338da93eb2), loading rtc-xxx from platform code fails. Update mv2120-setup.c so that the driver is loaded correctly. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
* [ARM] Orion: initialize UART1 on Kurobox Pro/Linkstation ProSylver Bruneau2008-06-30
| | | | | | | | | | Kurobox Pro/Linkstation Pro devices use a microcontroller connected to UART1. As most of the communication with this microcontroller is done from userland (power button detection, fan speed ...), the setup file has to make UART1 available from userland. Signed-off-by: Sylver Bruneau <sylver.bruneau@googlemail.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
* [ARM] Orion: nuke orion5x_{read,write}Lennert Buytenhek2008-06-22
| | | | | | Nuke the Orion-specific orion5x_{read,write} wrappers. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
* [ARM] Orion: add Maxtor Shared Storage II supportSylver Bruneau2008-06-22
| | | | | | | This patch adds support for the Maxtor Shared Storage II hardware. Signed-off-by: Sylver Bruneau <sylver.bruneau@googlemail.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
* [ARM] Orion: add Technologic Systems TS-78xx supportAlexander Clouter2008-06-22
| | | | | Signed-off-by: Alexander Clouter <alex@digriz.org.uk> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
* [ARM] Orion: remove code duplication in TS209 and TS409 setup filesSylver Bruneau2008-06-22
| | | | | Signed-off-by: Sylver Bruneau <sylver.bruneau@googlemail.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
* [ARM] Orion: add HP Media Vault mv2120 supportMartin Michlmayr2008-06-22
| | | | Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
* [ARM] Orion: add Linksys WRT350N v2 supportLennert Buytenhek2008-06-22
| | | | | | Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Tested-by: Peter van Valderen <p.v.valderen@gmail.com>
* [ARM] Orion: add 88F5181L (Orion-VoIP) supportLennert Buytenhek2008-06-22
| | | | | Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Acked-by: Russell King <linux@arm.linux.org.uk>
* [ARM] Orion: add QNAP TS-409 supportSylver Bruneau2008-06-22
| | | | Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
* [ARM] Orion: implement power-off method for Kurobox ProSylver Bruneau2008-06-22
| | | | | | | | | | This patch implements the communication with the microcontroller on the Kurobox Pro and Linkstation Pro/Live boards. This is allowing to send the commands needed to power-off the board correctly. Signed-off-by: Sylver Bruneau <sylver.bruneau@googlemail.com> Acked-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
* [ARM] Orion: avoid setting ->force_phy_addrLennert Buytenhek2008-06-22
| | | | | | | | | | | | | | | | The mv643xx_eth platform data field ->force_phy_addr only needs to be set if the passed-in ->phy_addr field is zero (to distinguish the case of not having specified a phy address (force_phy_addr = 0) from the case where a phy address of zero needs to be used (force_phy_addr = 1.)) Also, the ->force_phy_addr field will hopefully disappear in a future mv643xx_eth reorganisation. Therefore, this patch deletes the ->force_phy_addr field initialiser from all Orion board code. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
* [ARM] Orion: remove error printks in ->map_irq() implementationsLennert Buytenhek2008-06-22
| | | | | | | | | | | | | | | If all PCI devices are working as expected, the error printks in the various implementations of ->map_irq() doesn't really provide any useful info. And if something is not working as expected, turning on pci=debug gives you more useful information than the printk calls in ->map_irq(), since the former also tells you which devices _did_ get IRQs successfully assigned. Therefore, delete these printks entirely. Spotted by Russell King. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Acked-by: Russell King <linux@arm.linux.org.uk>
* [ARM] Orion: rework MPP handlingLennert Buytenhek2008-06-22
| | | | | | | | | | | | Instead of having board code poke directly into the MPP configuration registers, and separately calling orion5x_gpio_set_valid_pins() to indicate which MPP pins can be used as GPIO pins, introduce a helper function for configuring the roles of each of the MPP pins, and have that helper function handle gpio validity internally. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Acked-by: Sylver Bruneau <sylver.bruneau@googlemail.com> Acked-by: Russell King <linux@arm.linux.org.uk>
* [ARM] Orion: move setting up PCIe WA window into PCIe setup pathLennert Buytenhek2008-06-22
| | | | | | | | | | | | | | It makes no sense to do PCIe WA window setup in the individual board support files while the decision whether or not to use the PCIe WA access method is made in a different place, in the PCIe support code. This patch moves the configuration of a PCIe WA window from the individual Orion board support files to the central Orion PCIe support code. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Acked-by: Russell King <linux@arm.linux.org.uk>
* [ARM] Orion: move EHCI/I2C/UART peripheral init into board codeLennert Buytenhek2008-06-22
| | | | | | | | | | | | | | | | | This patch moves initialisation of EHCI/I2C/UART platform devices from the common orion5x_init() into the board support code. The rationale behind this is that only the board support code knows whether certain peripherals have been brought out on the board, and not initialising peripherals that haven't been brought out is desirable for example: - to reduce user confusion (e.g. seeing both 'eth0' and 'eth1' appear while there is only one ethernet port on the board); and - to allow for future power savings (peripherals that have not been brought out can be clock gated off entirely). Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Acked-by: Russell King <linux@arm.linux.org.uk>
* [ARM] Orion: DRAM mapping granularity is 64KiB, not 16MiBLennert Buytenhek2008-06-22
| | | | | | | | | | | | | The DRAM base address and size fields in the CPU's MBUS bridge have 64KiB granularity, instead of the currently used 16MiB. Since all of the currently supported MBUS peripherals support 64KiB granularity as well, this patch changes the Orion address map code to stop rounding base addresses down and sizes up to multiples of 16MiB. Found by Ke Wei <kewei@marvell.com>. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Acked-by: Russell King <linux@arm.linux.org.uk>
* [ARM] Orion: make window setup a little more safeLennert Buytenhek2008-06-22
| | | | | | | | | | | | | | Currently, Orion window setup uses hardcoded window indexes for each of the boot/cs0/cs1/cs2/PCIe WA windows. The static window allocation used can clash if board support code will ever attempt to configure both a dev2 and a PCIe WA window, as both of those use CPU mbus window #7 at present. This patch keeps track of the last used window, and opens subsequently requested windows sequentially, starting from 4. (Windows 0-3 are used as MEM/IO windows for the PCI/PCIe buses.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
* [ARM] Orion: fix various whitespace and coding style issuesLennert Buytenhek2008-06-22
| | | | | | | | | | More cosmetic cleanup: - Replace 8-space indents by proper tab indents. - In structure initialisers, use a trailing comma for every member. - Collapse "},\n{" in structure initialiers to "}, {". Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Acked-by: Russell King <linux@arm.linux.org.uk>
* [ARM] 5037/1: Orion: fix DNS323/Kurobox Pro PCI initialisationLennert Buytenhek2008-05-17
| | | | | | | | | | | | | | | | | | | | Whereas most Orion 5x machine support code would initialise the PCI subsystem with nr_controllers in their struct hw_pci set to 2, the DNS323 and Kurobox Pro machine support code had nr_controllers set to 1. This was presumably done because on those two machines, the PCI(-X) controller (nr == 1) isn't used, requiring initialisation of only the PCIe controller (nr == 0.) However, not initialising the PCI(-X) controller on boards that don't use it leads to a situation where both the PCIe and the PCI(-X) controller think that their root bus is zero, and it messes up IRQ assignment. This patch changes the DNS323 and Kurobox Pro support code to always use nr_controllers == 2. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Orion: clean up addr-map.c after window setting code purgeLennert Buytenhek2008-05-09
| | | | | | | | | | This patch cleans up Orion's addr-map.c a bit after all peripheral window programming code has been moved out into the relevant drivers. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Reviewed-by: Tzachi Perelstein <tzachi@marvell.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Nicolas Pitre <nico@marvell.com>
* [ARM] Orion: pass proper t_clk into mv643xx_ethLennert Buytenhek2008-05-09
| | | | | | | Pass the Orion TCLK tick rate into the ethernet driver. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
* [ARM] Orion: use mv643xx_eth driver mbus window handlingLennert Buytenhek2008-05-09
| | | | | | | | | | | Make the Orion 5x platform code use the mbus window handling code that's in the mv643xx_eth driver, instead of programming the GigE block's mbus window registers by hand. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Reviewed-by: Tzachi Perelstein <tzachi@marvell.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Nicolas Pitre <nico@marvell.com>
* Merge branch 'for-2.6.26' of ↵Jeff Garzik2008-05-06
|\ | | | | | | git://git.farnsworth.org/dale/linux-2.6-mv643xx_eth into upstream
| * mv643xx_eth: get rid of static variables, allow multiple instancesLennert Buytenhek2008-04-29
| | | | | | | | | | | | | | | | | | | | | | Move mv643xx_eth's static state (ethernet register block base address and MII management interface spinlock) into a struct hanging off the shared platform device. This is necessary to support chips that contain multiple mv643xx_eth silicon blocks. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Acked-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
* | Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2008-04-29
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/home/rmk/linux-2.6-arm: (26 commits) [ARM] pxa: fix 1c104e0e4f6ab396960c058e95e18bdedcac945b [ARM] serial: s3c2410: platform_get_irq() may return signed unnoticed [ARM] am79c961a: platform_get_irq() may return signed unnoticed [ARM] Feroceon: Feroceon-specific WA-cache compatible {copy,clear}_user_page() [ARM] Feroceon: fix function alignment in proc-feroceon.S [ARM] Orion: catch a couple more alternative spellings of PCIe [ARM] Orion: fix orion-ehci platform resource end addresses [ARM] Orion: fix ->map_irq() PCIe bus number check [ARM] Orion: fix ioremap() optimization [ARM] feroceon: remove CONFIG_CPU_CACHE_ROUND_ROBIN check [ARM] feroceon: remove CONFIG_CPU_DCACHE_WRITETHROUGH check kprobes/arm: fix decoding of arithmetic immediate instructions kprobes/arm: fix cache flush address for instruction stub [ARM] 5022/1: Race in ARM MMCI PL18x driver, V2 [ARM] 5021/1: at91: buildfix for sam9263 + PM [ARM] 5018/1: RealView: Fix the ARM11MPCore Oprofile compilation [ARM] 5016/1: AT91: typo in mci configuration for at91cap at91sam9263 [ARM] 5017/1: pxa3xx: Report unsupported wakeup sources in pxa3xx_set_wake() [ARM] 5020/1: magician: remove __devinit marker from pasic3_leds_info [ARM] 5014/1: Cleanup reset state before entering suspend or resetting. ...
| * | [ARM] Orion: catch a couple more alternative spellings of PCIeLennert Buytenhek2008-04-28
| | | | | | | | | | | | | | | | | | | | | Unify a couple more spellings of "PCIe" ("PCI-E", "PCIE".) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
| * | [ARM] Orion: fix orion-ehci platform resource end addressesLennert Buytenhek2008-04-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | End addresses in 'struct resource' are inclusive -- fix the common orion5x code to pass in the proper end addresses when instantiating the two on-chip EHCI controllers. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
| * | [ARM] Orion: fix ->map_irq() PCIe bus number checkLennert Buytenhek2008-04-28
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current orion5x board ->map_irq() routines check whether a given bus number lives on the PCIe controller by comparing it with the PCIe controller's primary bus number. This doesn't work in case there are multiple buses in the PCIe domain, i.e. if there exists a PCIe bridge on the primary PCIe bus. This patch adds a helper function (orion5x_pci_map_irq()) that returns the IRQ number for the given PCI device if that device has a hard-wired IRQ, or -1 otherwise, and makes each board's ->map_irq() function use this helper function. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
* / i2c: Convert most new-style drivers to use module aliasingJean Delvare2008-04-29
|/ | | | | | | | | | | | | | Based on earlier work by Jon Smirl and Jochen Friedrich. Update most new-style i2c drivers to use standard module aliasing instead of the old driver_name/type driver matching scheme. I've left the video drivers apart (except for SoC camera drivers) as they're a bit more diffcult to deal with, they'll have their own patch later. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Jon Smirl <jonsmirl@gmail.com> Cc: Jochen Friedrich <jochen@scram.de>
* [ARM] 4955/1: Orion: Support the Buffalo Linkstation Pro/Live PlatformByron Bradley2008-04-10
| | | | | | | | | | | | The Buffalo Linkstation Pro/Live is the same hardware as the Kurobox Pro but without the NAND flash. This patch adds a second MACHINE_START macro to the Kurobox setup file to minimise code duplication. Signed-off-by: Byron Bradley <byron.bbradley@gmail.com> Acked-by: Nicolas Pitre <nico@marvell.com> Acked-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4954/1: Orion: fix some function section mismatchNicolas Pitre2008-04-10
| | | | | | | Without this, lspci won't work. Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4886/1: Orion: grab ts209 ethernet MAC address from flashLennert Buytenhek2008-04-04
| | | | | | | | | | | | | | | The bootloader on ts209 Orion boards doesn't configure the right ethernet MAC address into the GigE unit on boot. The only way to get the MAC address is by parsing it from the 'NAS Config' flash partition, which is an ext2 partition that contains a file which holds the MAC address in plain text (format "xx:xx:xx:xx:xx:xx\n") -- this patch does that. Tested-by: Martin Michlmayr <tbm@cyrius.com> Cc: Byron Bradley <byron.bbradley@gmail.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Orion: orion -> orion5x renameLennert Buytenhek2008-03-27
Do a global s/orion/orion5x/ of the Orion 5x-specific bits (i.e. not the plat-orion bits.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Reviewed-by: Tzachi Perelstein <tzachi@marvell.com> Acked-by: Saeed Bishara <saeed@marvell.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Nicolas Pitre <nico@marvell.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-29 01:08:29 -0500