aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/board-rx51-peripherals.c
Commit message (Collapse)AuthorAge
* OMAP2, 3: DSS2: VENC: create platform_driver, move init, exit to driverSenthilvadivu Guruswamy2011-03-11
| | | | | | | | | | | | | | Hwmod adaptation design requires each of the DSS HW IP to be a platform driver. So a platform_driver for VENC is created and init exit methods are moved from core.c to its driver probe,remove. pdev member has to be maintained by its own drivers. Also, venc_vdda_dac reading is moved to venc.c. VENC platform driver is registered from inside omap_dss_probe, in the order desired. Signed-off-by: Senthilvadivu Guruswamy <svadivu@ti.com> Signed-off-by: Sumit Semwal <sumit.semwal@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
*-. Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and ↵Tony Lindgren2011-03-02
|\ \ | | | | | | | | | | | | | | | | | | 'devel-hsmmc' into omap-for-linus Conflicts: arch/arm/mach-omap2/omap_hwmod_44xx_data.c
| | * OMAP: hsmmc: Rename the device and driverKishore Kadiyala2011-03-01
| |/ |/| | | | | | | | | | | | | | | Modifying the device & driver name from "mmci-omap-hs" to "omap_hsmmc". Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Acked-by: Benoit Cousson<b-cousson@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap: rx51: Add support for vibraIlkka Koskinen2011-03-02
| | | | | | | | | | | | | | Add support for vibra Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap: rx51: Add SI4713 FM transmitterJarkko Nikula2011-02-25
|/ | | | | | | | | | | | | | | Add SI4713 FM transmitter supplies, platform data and setup to RX-51/N900. It is connected to line output signals of TLV320AIC34 codec A part. Driver can be either built-in or a module. It can be tuned with v4l2-ctl from ivtv-utils. Following examples illustrate the use of it: v4l2-ctl -d /dev/radio0 --set-ctrl=mute=0 (power up) v4l2-ctl -d /dev/radio0 -f 107900 (tune 107.9 MHz) v4l2-ctl -d /dev/radio0 --set-ctrl=mute=1 (power down) Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: rx51: Add vdda_dac supply for tvoutJarkko Nikula2010-12-22
| | | | | | | | | | | | | | | Commmit 60d24ee "Added video data to support tvout on rx51" broke the DSS on RX51/N900 since it added DSS VENC support but a patch adding needed supply is missing from tree and no framebuffers are initialized. This patch is basically cleaned up version of original one: http://marc.info/?l=linux-omap&m=129070041402418&w=2 Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Srikar <ext-srikar.1.bhavanarayana@nokia.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: rx51: Cleanup vdds_sdi supply constructionJarkko Nikula2010-12-22
| | | | | | | | | | It is much more cleaner to use REGULATOR_SUPPLY macro and a device name instead of having a reference to rx51_display_device.dev with #if defined() guards. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: rx51: Switch rx51_tpa6130a2_data __initdata to__initdata_or_moduleJarkko Nikula2010-12-20
| | | | | | | | | | | If the TPA6130 is compiled as module the id and power_gpio values are arbitrary at module probing time since the rx51_tpa6130a2_data was marked as __initdata. Fix this by using __initdata_or_module. Then __initdata is defined only if the kernel is built without CONFIG_MODULES and omitted otherwise. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: rx51: Add supplies and data for codec b part ofTLV320AIC34Jarkko Nikula2010-12-20
| | | | | | | | | Upcoming ASoC core and tlv320aic3x changes makes possible to take b part of TLV320AIC34 into use on RX51/N900. Prepare to this by adding virtual supplies and platform data for b part of the codec. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: rx51: Remove extra tlv320aic3x.h inclusionJarkko Nikula2010-12-20
| | | | | | | | | Remove second tlv320aic3x.h inclusion that came along the commit f0fba2a "ASoC: multi-component - ASoC Multi-Component Support". Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
* arm: mach-omap2: rx51: clean up dummy onenand initAaro Koskinen2010-12-02
| | | | | | | | | When OneNAND support is disabled, the platform code defines NULL board_onenand_data and empty init function for us. By utilizing this we can avoid cluttering board files with dummy definitions/wrappers. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP: mux: Add support for control module split in several partitionsBenoit Cousson2010-11-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Starting on OMAP4, the pin mux configuration is located in two different partitions of the control module (CODE_PAD and WKUP_PAD). The first one is inside the core power domain whereas the second one is inside the wakeup. - Add the capability to add any number of partition during board init time depending of Soc partitioning. - Add some init flags as well in order to avoid explicit Soc version check inside the mux core code. - Add a comment with mux0 mode on top of omap_mux/board/<partition> if the current mux mode is not the default one. Thanks to Tony Lindgren <tony@atomide.com> for the following improvements: - Add omap_mux_get for getting the partition data so platform level device code can use it. - Fix the rx51 board code to use the new API. - Do not store the partition for each mux entry. Look up the partition for debugfs instead. Thanks to Dan Murphy <dmurphy@ti.com> for testing on OMAP4 and reporting a couple of bugs. Thanks to Anand Gadiyar <gadiyar@ti.com> for testing on OMAP3 zoom and bug report. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Murphy Dan <dmurphy@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Anand Gadiyar <gadiyar@ti.com>
* Merge git://git.infradead.org/battery-2.6Linus Torvalds2010-10-26
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.infradead.org/battery-2.6: power_supply: Makefile cleanup bq27x00_battery: Add missing kfree(di->bus) in bq27x00_battery_remove() power_supply: Introduce maximum current property power_supply: Add types for USB chargers ds2782_battery: Fix units power_supply: Add driver for TWL4030/TPS65950 BCI charger bq20z75: Add support for more power supply properties wm831x_power: Add missing kfree(wm831x_power) in wm831x_power_remove() jz4740-battery: Add missing kfree(jz_battery) in jz_battery_remove() ds2760_battery: Add missing kfree(di) in ds2760_battery_remove() olpc_battery: Fix endian neutral breakage for s16 values ds2760_battery: Fix W1 and W1_SLAVE_DS2760 dependency pcf50633-charger: Add missing sysfs_remove_group() power_supply: Add driver for TI BQ20Z75 gas gauge IC wm831x_power: Remove duplicate chg mask omap: rx51: Add support for USB chargers power_supply: Add isp1704 charger detection driver
| * omap: rx51: Add support for USB chargersHeikki Krogerus2010-08-20
| | | | | | | | | | | | | | | | | | This enables isp1704 power supply driver on RX51, allowing USB charger detection with N900. Signed-off-by: Heikki Krogerus <ext-heikki.krogerus@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
* | Merge branch 'omap-for-linus' of ↵Linus Torvalds2010-10-25
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (163 commits) omap: complete removal of machine_desc.io_pg_offst and .phys_io omap: UART: fix wakeup registers for OMAP24xx UART2 omap: Fix spotty MMC voltages ASoC: OMAP4: MCPDM: Remove unnecessary include of plat/control.h serial: omap-serial: fix signess error OMAP3: DMA: Errata i541: sDMA FIFO draining does not finish omap: dma: Fix buffering disable bit setting for omap24xx omap: serial: Fix the boot-up crash/reboot without CONFIG_PM OMAP3: PM: fix scratchpad memory accesses for off-mode omap4: pandaboard: enable the ehci port on pandaboard omap4: pandaboard: Fix the init if CONFIG_MMC_OMAP_HS is not set omap4: pandaboard: remove unused hsmmc definition OMAP: McBSP: Remove null omap44xx ops comment OMAP: McBSP: Swap CLKS source definition OMAP: McBSP: Fix CLKR and FSR signal muxing OMAP2+: clock: reduce the amount of standard debugging while disabling unused clocks OMAP: control: move plat-omap/control.h to mach-omap2/control.h OMAP: split plat-omap/common.c OMAP: McBSP: implement functional clock switching via clock framework OMAP: McBSP: implement McBSP CLKR and FSR signal muxing via mach-omap2/mcbsp.c ... Fixed up trivial conflicts in arch/arm/mach-omap2/ {board-zoom-peripherals.c,devices.c} as per Tony
| * | OMAP3: Keypad: Fix incorrect type initializerManjunath Kondaiah G2010-10-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The keypad matrix variable declaration is not matching with structure variable keymap declared in keypad_matrix.h. Due to this, following sparse warnings are generated with omap3_defconfig. arch/arm/mach-omap2/board-devkit8000.c:223:14: warning: incorrect type in initializer (different signedness) arch/arm/mach-omap2/board-devkit8000.c:223:14: expected unsigned int const [usertype] *keymap arch/arm/mach-omap2/board-devkit8000.c:223:14: got int static [toplevel] *<noident> arch/arm/mach-omap2/board-ldp.c:107:14: warning: incorrect type in initializer (different signedness) arch/arm/mach-omap2/board-ldp.c:107:14: expected unsigned int const [usertype] *keymap arch/arm/mach-omap2/board-ldp.c:107:14: got int static [toplevel] *<noident> arch/arm/mach-omap2/board-omap3evm.c:472:14: warning: incorrect type in initializer (different signedness) arch/arm/mach-omap2/board-omap3evm.c:472:14: expected unsigned int const [usertype] *keymap arch/arm/mach-omap2/board-omap3evm.c:472:14: got int static [toplevel] *<noident> arch/arm/mach-omap2/board-3430sdp.c:114:14: warning: incorrect type in initializer (different signedness) arch/arm/mach-omap2/board-3430sdp.c:114:14: expected unsigned int const [usertype] *keymap arch/arm/mach-omap2/board-3430sdp.c:114:14: got int static [toplevel] *<noident> arch/arm/mach-omap2/board-rx51-peripherals.c:248:14: warning: incorrect type in initializer (different signedness) arch/arm/mach-omap2/board-rx51-peripherals.c:248:14: expected unsigned int const [usertype] *keymap arch/arm/mach-omap2/board-rx51-peripherals.c:248:14: got int static [toplevel] *<noident> arch/arm/mach-omap2/board-zoom-peripherals.c:88:14: warning: incorrect type in initializer (different signedness) arch/arm/mach-omap2/board-zoom-peripherals.c:88:14: expected unsigned int const [usertype] *keymap arch/arm/mach-omap2/board-zoom-peripherals.c:88:14: got int static [toplevel] *<noident> arch/arm/mach-omap2/board-cm-t35.c:568:14: warning: incorrect type in initializer (different signedness) arch/arm/mach-omap2/board-cm-t35.c:568:14: expected unsigned int const [usertype] *keymap arch/arm/mach-omap2/board-cm-t35.c:568:14: got int static [toplevel] *<noident> arch/arm/mach-omap2/board-omap3stalker.c:415:13: warning: incorrect type in initializer (different signedness) arch/arm/mach-omap2/board-omap3stalker.c:415:13: expected unsigned int const [usertype] *keymap arch/arm/mach-omap2/board-omap3stalker.c:415:13: got int static [toplevel] *<noident> This patch modifies the variable keymap declaration as per declaration in matrix_keymap structure. Signed-off-by: Manjunath Kondaiah G <manjugk@ti.com> Cc: linux-input@vger.kernel.org Cc: Dmitry Torokhov <dtor@mail.ru> Cc: linux-arm-kernel@lists.infradead.org Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | OMAP2plus: Fix static function warningsManjunath Kondaiah G2010-10-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes sparse warnings due non declarations of static functions. arch/arm/mach-omap2/timer-gp.c:115:12: warning: symbol 'omap2_gp_clockevent_set_gptimer' was not declared. Should it be static? arch/arm/mach-omap2/powerdomain.c:993:5: warning: symbol 'pwrdm_set_lowpwrstchange' was not declared. Should it be static? arch/arm/mach-omap2/board-flash.c:141:8: warning: symbol 'board_nand_init' was not declared. Should it be static? arch/arm/mach-omap2/board-n8x0.c:416:6: warning: symbol 'n8x0_mmc_slot1_cover_handler' was not declared. Should it be static? arch/arm/mach-omap2/board-n8x0.c:544:13: warning: symbol 'n8x0_mmc_init' was not declared. Should it be static? arch/arm/mach-omap2/board-rx51-peripherals.c:902:13: warning: symbol 'rx51_peripherals_init' was not declared. Should it be static? arch/arm/mach-omap2/board-rx51-video.c:107:13: warning: symbol 'rx51_video_mem_init' was not declared. Should it be static? arch/arm/mach-omap2/board-zoom-debugboard.c:155:12: warning: symbol 'zoom_debugboard_init' was not declared. Should it be static? arch/arm/mach-omap2/board-zoom-peripherals.c:280:13: warning: symbol 'zoom_peripherals_init' was not declared. Should it be static? arch/arm/mach-omap2/board-igep0020.c:110:13: warning: symbol 'igep2_flash_init' was not declared. Should it be static? arch/arm/mach-omap2/board-am3517evm.c:109:6: warning: symbol 'am3517_evm_ethernet_init' was not declared. Should it be static? drivers/mtd/onenand/omap2.c:577:5: warning: symbol 'omap2_onenand_rephase' was not declared. Should it be static? Signed-off-by: Manjunath Kondaiah G <manjugk@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | omap: mmc: extended to pass host capabilities from board fileSukumar Ghorai2010-09-27
| |/ | | | | | | | | | | | | | | | | wires variable is renamed, extended and this single variable to be used to pass the platform capabilities, e.g DDR mode. Also removed the hardcoded value was using as bus-width. Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | Merge branch 'for-linus' of ↵Linus Torvalds2010-10-25
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (365 commits) ALSA: hda - Disable sticky PCM stream assignment for AD codecs ALSA: usb - Creative USB X-Fi volume knob support ALSA: ca0106: Use card specific dac id for mute controls. ALSA: ca0106: Allow different sound cards to use different SPI channel mappings. ALSA: ca0106: Create a nice spot for mapping channels to dacs. ALSA: ca0106: Move enabling of front dac out of hardcoded setup sequence. ALSA: ca0106: Pull out dac powering routine into separate function. ALSA: ca0106 - add Sound Blaster 5.1vx info. ASoC: tlv320dac33: Use usleep_range for delays ALSA: usb-audio: add Novation Launchpad support ALSA: hda - Add workarounds for CT-IBG controllers ALSA: hda - Fix wrong TLV mute bit for STAC/IDT codecs ASoC: tpa6130a2: Error handling for broken chip ASoC: max98088: Staticise m98088_eq_band ASoC: soc-core: Fix codec->name memory leak ALSA: hda - Apply ideapad quirk to Acer laptops with Cxt5066 ALSA: hda - Add some workarounds for Creative IBG ALSA: hda - Fix wrong SPDIF NID assignment for CA0110 ALSA: hda - Fix codec rename rules for ALC662-compatible codecs ALSA: hda - Add alc_init_jacks() call to other codecs ...
| * | omap: rx51: Remove redefinition of rx51_aic3x_dataJarkko Nikula2010-08-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Redefinition of rx51_aic3x_data got introduced when merging upstread changes for 2.6.36 and ASoC Multi-Component Support. This must go together with multi-component commit f0fba2a. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * | Merge branch 'for-2.6.36' into for-2.6.37Mark Brown2010-08-16
| |\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fairly simple conflicts, the most serious ones are the i.MX ones which I suspect now need another rename. Conflicts: arch/arm/mach-mx2/clock_imx27.c arch/arm/mach-mx2/devices.c arch/arm/mach-omap2/board-rx51-peripherals.c arch/arm/mach-omap2/board-zoom2.c sound/soc/fsl/mpc5200_dma.c sound/soc/fsl/mpc5200_dma.h sound/soc/fsl/mpc8610_hpcd.c sound/soc/pxa/spitz.c
| * | ASoC: multi-component - ASoC Multi-Component SupportLiam Girdwood2010-08-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | | Merge branch 'master' of ↵John W. Linville2010-09-21
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: arch/arm/mach-omap2/board-omap3pandora.c drivers/net/wireless/ath/ath5k/base.c
| * | wl12xx: make wl12xx.h common to both spi and sdioOhad Ben-Cohen2010-09-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move wl12xx.h outside of the spi-specific location, so it can be shared with both spi and sdio solutions. Update all users of spi/wl12xx.h accordingly Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Acked-by: Luciano Coelho <luciano.coelho@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | Merge branch 'devel-misc' into omap-for-linusTony Lindgren2010-08-02
|\| |
| * | Input: RX51 keymap - fix recent compile breakageDmitry Torokhov2010-07-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 3fea60261e73 ("Input: twl40300-keypad - fix handling of "all ground" rows") broke compilation as I managed to use non-existent keycodes. Reported-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | Input: twl40300-keypad - fix handling of "all ground" rowsDmitry Torokhov2010-07-20
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Nokia RX51 board code (arch/arm/mach-omap2/board-rx51-peripherals.c) defines a key map for the matrix keypad keyboard. The hardware seems to use all of the 8 rows and 8 columns of the keypad, although not all possible locations are used. The TWL4030 supports keypads with at most 8 rows and 8 columns. Most keys are defined with a row and column number between 0 and 7, except KEY(0xff, 2, KEY_F9), KEY(0xff, 4, KEY_F10), KEY(0xff, 5, KEY_F11), which represent keycodes that should be emitted when entire row is connected to the ground. since the driver handles this case as if we had an extra column in the key matrix. Unfortunately we do not allocate enough space and end up owerwriting some random memory. Reported-and-tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: stable@kernel.org Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* | omap: tsl2563 ALS support for Nokia N900Mathias Nyman2010-08-02
| | | | | | | | | | | | | | | | This commit will enable usage of tsl2563 ambient light sensor on Nokia N900. Signed-off-by: Ameya Palande <ameya.palande@nokia.com> Signed-off-by: Mathias Nyman <mathias.nyman@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | omap: rx51: Add supply and data for the tpa6130a2 headphoneamplifierJarkko Nikula2010-08-02
| | | | | | | | | | | | | | | | With these and upcoming change to tpa6130a2 driver it's possible to add support for the TPA6130A2 headphone amplifier. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | omap: rx51: Use REGULATOR_SUPPLY macro when initializingregulator consumersJarkko Nikula2010-08-02
| | | | | | | | | | | | | | | | | | | | There is REGULATOR_SUPPLY macro available for initializing the struct regulator_consumer_supply so use it where applicable (all other supplies than vdds_sdi) as it improves the readability. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Eduardo Valentin <eduardo.valentin@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | omap: rx51: Add platform_data for tlv320aic3x with reset gpionumberJarkko Nikula2010-08-02
| | | | | | | | | | | | | | | | | | | | Proper operation of the tlv320aic3x audio codec requires that reset sequencing is done in pair with supply voltages when using the regulator framework. Add the codec reset gpio used in Nokia RX51 to tlv320aic3x data. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | omap: rx51: Set regulator V28 always onJarkko Nikula2010-08-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It seems that the battery cover sensor in Nokia N900 is powered from the V28 domain. Now if this regulator is disabled it causes that the gpio 160 reads only zero which effectively causes uSD removal detection. Currently the bootloader enabled V28 is kept on but this may change in the future according to comment in drivers/regulator/core.c: regulator_has_full_constraints. Also if there are any consumers on the V28 domain doing regulator_enable regulator_disable cycle the V28 will be disabled after that. Prepare for these by defining the V28 as always_on regulator. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | omap: mux: Remove old mux codeTony Lindgren2010-07-05
|/ | | | | | All mach-omap2 omaps should now use the new mux code. Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge branch 'for-linus' of git://gitorious.org/linux-omap-dss2/linuxLinus Torvalds2010-05-21
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://gitorious.org/linux-omap-dss2/linux: (23 commits) OMAP: DSS2: Fix omap_dss_probe() error path OMAP: DSS2: omap_dss_probe() conditional compilation cleanup board-omap3-beagle: add DSS2 support OMAP2: DSS: Add missing line for update bg color OMAP3630: DSS2: Updating MAX divider value OMAP: RX51: Update board defconfig OMAP: DSS2: Add ACX565AKM Panel Driver OMAP: RX51: Add Touch Controller in SPI board info OMAP: RX51: Add LCD Panel support OMAP: DSS2: TPO-TD03MTEA1: fix Kconfig dependency OMAP: LCD LS037V7DW01: Add Backlight driver support OMAP: DSS2: Taal: Fix DSI bus locking problem OMAP: DSS2: Taal: add mutex to protect panel data OMAP: DSS2: Make partial update width even OMAP: DSS2: Fix device disable when driver is not loaded OMAP: DSS2: VENC: don't call platform_enable/disable() twice OMAP: DSS2: check lock_fb_info() return value OMAP: DSS2: fix lock_fb_info() and omapfb_lock() locking order OMAP: DSS2: Use vdds_sdi regulator supply in SDI OMAP: DSS2: Remove redundant enable/disable calls from SDI ...
| * OMAP: RX51: Add Touch Controller in SPI board infoRoger Quadros2010-05-18
| | | | | | | | | | | | | | | | | | | | | | The Touch controller and LCD Panel share the same SPI bus 1. So, we need to define the touch controller in the SPI board info else, the SPI bus will be contended due to invalid state of Touch controller's Chip Select thus preventing the LCD panel from working. Signed-off-by: Roger Quadros <roger.quadros@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
| * OMAP: RX51: Add LCD Panel supportRoger Quadros2010-05-18
| | | | | | | | | | | | | | Adds basic support for LCD Panel on Nokia N900 Signed-off-by: Roger Quadros <roger.quadros@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
* | OMAP: RX51: Add "vdds_sdi" supply voltage for SDIRoger Quadros2010-05-20
| | | | | | | | | | | | | | | | The SDI Display subsystem needs access to the vdds_sdi supply regulator. This is TWL4030's VAUX1 supply on RX-51. Signed-off-by: Roger Quadros <roger.quadros@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
* | omap: rx51: Add supplies for the tlv320aic3x codec driverJarkko Nikula2010-05-20
| | | | | | | | | | | | | | | | | | | | Upcoming change to tlv320aic3x codec driver require four supplies. Implement this by connecting analogic supplies to TWL4030 VMMC2 and digital supplies to TWL4030 VIO. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Eduardo Valentin <eduardo.valentin@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | omap: rx51: Add i2c2 board_info with tlv320aic3xJarkko Nikula2010-05-20
| | | | | | | | | | | | | | | | | | | | This makes possible to probe the audio codec and add another i2c2 components in the future. Fix also indentation for the first omap_register_i2c_bus. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | omap: rx51: Change the TWL4030 VMMC2 voltage constraints andsupply nameJarkko Nikula2010-05-20
|/ | | | | | | | | | | | | | | | | | I believe the VMMC2 constraints must be the same than with VAUX3. Older boards are using TWL4030 VMMC2 supply for internal MMC whereas newer are using VAUX3 that has more limited constraints defined in this same file. More over, the VMMC2 supply is used also for analog audio domain and the miminum analog voltage of the TLV320AIC34 codec is 2.7 V. To combine these two facts, the patch changes supply name to V28_A as the newer boards register VMMC2_30 for VAUX3 and uses the same constraints than VAUX3 since those constraints are ok for the TLV320AIC34. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: Eduardo Valentin <eduardo.valentin@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: RX51: Remux to pull eMMC lines down when powering offAdrian Hunter2010-02-15
| | | | | | | | | | | It has been discovered that, when eMMC is powered off, current will flow from OMAP eMMC data pull-ups to the eMMC voltage supply. Configuring pads for OMAP off-mode does not help because eMMC is powered off independently of OMAP off-mode. Hence the pads are now re-configured when eMMC is powered on or off. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: Rename hsmmc symbols to reflect independence from twl4030Adrian Hunter2010-02-15
| | | | | | | | hsmmc.[ch] no longer has any dependency on twl4030 and variable names should be renamed to reflect that. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: Rename mmc-twl4030 files to hsmmcAdrian Hunter2010-02-15
| | | | | | | | mmc-twl4030.[ch] no longer has any dependency on twl4030 and should be renamed to reflect that. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* mfd: twl: fix twl4030 rename for remaining driver, board filesBalaji T K2009-12-16
| | | | | | | | | | | | | | | Recent drivers/mfd/twl4030* renames to twl broke compile for various boards as the series was missing a patch to change the board-*.c files. This patch renames include twl4030.h to include twl.h and also renames twl4030_i2c_ routines. Signed-off-by: Balaji T K <balajitk@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Felipe Balbi <felipe.balbi@nokia.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* mfd: Optimised twl4030-power power scripts for the rx51Amit Kucheria2009-12-13
| | | | | | | | | | | | | | The power scripts optimisation was mainly done by: Tero Kristo <tero.kristo@nokia.com> and Arnaud Mandy <ext-arnaud.2.mandy@nokia.com> I'm only refactoring and testing it against the mainline kernel. Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: linux-omap@vger.kernel.org Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* omap3: rx51: Use wl1251 in SPI mode 3Kalle Valo2009-12-11
| | | | | | | Otherwise Extreme Lower Power (ELP) wakeup doesn't work properly. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: mux: Replace omap_cfg_reg() with new style signal or gpio functionsTony Lindgren2009-12-11
| | | | | | Replace omap_cfg_reg() with new style signal or gpio functions Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap3: rx51: Add wl1251 wlan driver supportKalle Valo2009-11-22
| | | | | | | wl1251 is connected to the SPI bus in rx51, add support for this. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM OMAP3: RX-51 board - add initialization of gpio keysJani Nikula2009-11-22
| | | | | | | | | Initialize some of the RX-51 input GPIO lines as gpio keys. Enable gpio keys as a module in rx51_defconfig. Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* Merge branch '7xx-iosplit-plat' with omap-fixesTony Lindgren2009-11-10
|\
generated by cgit v1.2.2 (git 2.25.0) at 2024-10-31 22:32:22 -0400