aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/board-omap4panda.c
Commit message (Collapse)AuthorAge
*-. Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and ↵Tony Lindgren2011-03-02
|\ \ | | | | | | | | | | | | | | | | | | 'devel-hsmmc' into omap-for-linus Conflicts: arch/arm/mach-omap2/omap_hwmod_44xx_data.c
| | * OMAP: hsmmc: Rename the device and driverKishore Kadiyala2011-03-01
| |/ |/| | | | | | | | | | | | | | | Modifying the device & driver name from "mmci-omap-hs" to "omap_hsmmc". Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Acked-by: Benoit Cousson<b-cousson@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap: panda: Add TI-ST driver supportGuy Eilam2011-03-02
|/ | | | | | | | | | Added the KIM (Kernel initialization module for the Shared Transport driver) device entry in the board file Only the Blutooth enable GPIO is set for now Signed-off-by: Guy Eilam <guy@wizery.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: panda: add mmc5/wl1271 device supportPanduranga Mallireddy2011-02-22
| | | | | | | | | | | | Add MMC5 support on PANDA, which has the wl1271 device hardwired to. The wl1271 is a 4-wire, 1.8V, embedded SDIO WLAN device with an external IRQ line, and power-controlled by a GPIO-based fixed regulator. Based on the patch for mmc3/wl1271 device support for zoom by Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Panduranga Mallireddy <panduranga_mallireddy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: panda: add fixed regulator device for wlanPanduranga Mallireddy2011-02-22
| | | | | | | | | Add a fixed regulator vmmc device to enable power control of the wl1271 wlan device. Based on the patch for zoom by Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Panduranga Mallireddy <panduranga_mallireddy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: panda: wlan board muxingPanduranga Mallireddy2011-02-22
| | | | | | | | | | Add board muxing to support the wlan wl1271 chip that is hardwired to mmc5 (fifth mmc controller) on the PANDA. Based on the wlan board muxing for zoom3 by Ohad Ben-Cohen <ohadb@ti.com> Signed-off-by: Panduranga Mallireddy <panduranga_mallireddy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP4: Fix -EINVAL for vana, vcxio, vdacBalaji T K2011-02-22
| | | | | | | | | | | | | | | | | | | | | Fixed regulators in twl6030 do not have set_voltage hook. Regulator core returns -22 if set_voltage is NULL and apply_uV is set while applying the constraint to set voltage resulting in failure during probe of these regulators. Do not set apply_uV for fixed regulators which don't have set_voltage. machine_constraints_voltage: VANA: failed to apply 2100000uV constraint twl_reg twl_reg.43: can't register VANA, -22 twl_reg: probe of twl_reg.43 failed with error -22 machine_constraints_voltage: VCXIO: failed to apply 1800000uV constraint twl_reg twl_reg.44: can't register VCXIO, -22 twl_reg: probe of twl_reg.44 failed with error -22 machine_constraints_voltage: VDAC: failed to apply 1800000uV constraint twl_reg twl_reg.45: can't register VDAC, -22 twl_reg: probe of twl_reg.45 failed with error -22 Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP2: use early init hookRussell King - ARM Linux2011-02-14
| | | | | | | | Move non-mapping and non-irq initialization code out of .map_io and .init_irq respectively into the new init_early hook. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
* arm: omap4: panda: remove usb_nop_xceiv_register(v1)Ming Lei2011-02-02
| | | | | | | | | | | | Panda uses both twl6030 otg phy(vbus, id) and internal phy(data lines, DP/DM), so removes usb_nop_xceiv_register to make twl6030 otg driver working since current otg code only supports one global transceiver. Otherwise, musb doesn't work without the remove. Reviewd-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge branch 'ehci-omap-clock' into omap-fixesTony Lindgren2011-01-10
|\
| * Merge branch 'usb-next' of ↵Linus Torvalds2011-01-07
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (144 commits) USB: add support for Dream Cheeky DL100B Webmail Notifier (1d34:0004) USB: serial: ftdi_sio: add support for TIOCSERGETLSR USB: ehci-mxc: Setup portsc register prior to accessing OTG viewport USB: atmel_usba_udc: fix freeing irq in usba_udc_remove() usb: ehci-omap: fix tll channel enable mask usb: ohci-omap3: fix trivial typo USB: gadget: ci13xxx: don't assume that PAGE_SIZE is 4096 USB: gadget: ci13xxx: fix complete() callback for no_interrupt rq's USB: gadget: update ci13xxx to work with g_ether USB: gadgets: ci13xxx: fix probing of compiled-in gadget drivers Revert "USB: musb: pm: don't rely fully on clock support" Revert "USB: musb: blackfin: pm: make it work" USB: uas: Use GFP_NOIO instead of GFP_KERNEL in I/O submission path USB: uas: Ensure we only bind to a UAS interface USB: uas: Rename sense pipe and sense urb to status pipe and status urb USB: uas: Use kzalloc instead of kmalloc USB: uas: Fix up the Sense IU usb: musb: core: kill unneeded #include's DA8xx: assign name to MUSB IRQ resource usb: gadget: g_ncm added ... Manually fix up trivial conflicts in USB Kconfig changes in: arch/arm/mach-omap2/Kconfig arch/sh/Kconfig drivers/usb/Kconfig drivers/usb/host/ehci-hcd.c and annoying chip clock data conflicts in: arch/arm/mach-omap2/clock3xxx_data.c arch/arm/mach-omap2/clock44xx_data.c
| | * arm: OMAP4430: musb: Configure musb to OTG modeHema HK2010-12-10
| | | | | | | | | | | | | | | | | | | | | | | | Enabling the musb OTG mode for SDP and PANDA boards. Signed-off-by: Hema HK <hemahk@ti.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
| | * mfd: TWL6030: OMAP4: Registering the TWL6030-usb deviceHema HK2010-12-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Registering the twl6030-usb transceiver device as a child to twl6030 core. Removed the NOP transceiver init call from board file. Populated twl4030_usb_data platform data structure with the function pointers for OMAP4430 internal PHY operation to be used by twl630-usb driver. Signed-off-by: Hema HK <hemahk@ti.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
| | * arm: omap4: panda: initialize musbFelipe Balbi2010-12-10
| | | | | | | | | | | | | | | | | | | | | initialize the musb port on pandaboard. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | | arm: omap4: pandaboard: turn on PHY reference clock at initAnand Gadiyar2011-01-10
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SMSC 3320 USB PHY on the OMAP4 Pandaboard needs a 19.2 MHz reference clock. This clock is provided from the OMAP4's fref_clk3 pad. Recent changes to clock44xx_data.c made the clock framework aware of the existence of these fref_clk[i] lines. If the option CONFIG_OMAP_RESET_CLOCKS is enabled in the kernel, then the clock framework will turn these clocks off during bootup. Explicitly request and keep this clock enabled at init for the Pandaboard, so that the PHY receives this clock at all times. Reported-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Cc: Benoit Cousson <b-cousson@ti.com> Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | Merge branch 'integration-2.6.38-for-tony' of git://git.pwsan.com/linux-2.6 ↵Tony Lindgren2010-12-22
|\ \ | | | | | | | | | into omap-for-linus
| * | OMAP2+: io: split omap2_init_common_hw()Paul Walmsley2010-12-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Split omap2_init_common_hw() into two functions. The first, omap2_init_common_infrastructure(), initializes the hwmod code and data, the OMAP PM code, and the clock code and data. The second, omap2_init_common_devices(), handles any other early device initialization that, for whatever reason, has not been or cannot be moved to initcalls or early platform devices. This patch is required for the hwmod postsetup patch, which allows board files to change the state that hwmods should be placed into at the conclusion of the hwmod _setup() function. For example, for a board whose creators wish to ensure watchdog coverage across the entire kernel boot process, code to change the watchdog's postsetup state will be added in the board-*.c file between the omap2_init_common_infrastructure() and omap2_init_common_devices() function calls. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com>
* | | OMAP4: Pandaboard: Fix MMC card detect gpio lineRaghuveer Murthy2010-12-21
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit bf56f0a6668cd (2.6.37-rc1), from Nishanth Menon attempted to fix card detection for PandaBoard, unfortunately, the fix missed to initialize .gpio_cd member of omap2_hsmmc_info. This results in a default value of '0', which is a valid GPIO line. On PandaBoard, the side effect of this is that GPIO line 0 controls the powering TFP410 DVI chip, and without the fix DVI chip is inadvertently powered. Tested-by: David Anders <x0132446@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Signed-off-by: Raghuveer Murthy <raghuveer.murthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | OMAP4: Pandaboard: Add omap_reserve functionalityRaghuveer Murthy2010-12-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds omap_reserve functionality to board-omap4panda.c. Helps in the reserving boot time memory in SDRAM, used here for framebuffer allocation. This patch is in similar lines to commit id 71ee7dad9b6991, from Russell king Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Raghuveer Murthy <raghuveer.murthy@ti.com> [tony@atomide.com: fixed to be before .map_io as pointed out by Russell King] Signed-off-by: Tony Lindgren <tony@atomide.com>
* | OMAP: GPIO: Implement GPIO as a platform deviceVaradarajan, Charulatha2010-12-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement GPIO as a platform device. GPIO APIs are used in machine_init functions. Hence it is required to complete GPIO probe before board_init. Therefore GPIO device register and driver register are implemented as postcore_initcalls. omap_gpio_init() does nothing now and this function would be removed in the next patch as it's usage is spread across most of the board files. Inorder to convert GPIO as platform device, modifications are required in clockxxxx_data.c file for OMAP1 so that device names can be used to obtain clock instead of getting clocks by name/NULL ptr. Use runtime pm APIs (pm_runtime_put*/pm_runtime_get*) for enabling or disabling the clocks, modify sysconfig settings and remove usage of clock FW APIs. Note 1: Converting GPIO driver to use runtime PM APIs is not done as a separate patch because GPIO clock names are different for various OMAPs and are different for some of the banks in the same CPU. This would need usage of cpu_is checks and bank id checks while using clock FW APIs in the gpio driver. Hence while making GPIO a platform driver framework, PM runtime APIs are used directly. Note 2: While implementing GPIO as a platform device, pm runtime APIs are used as mentioned above and modification is not done in gpio's prepare for idle/ resume after idle functions. This would be done in the next patch series and GPIO driver would be made to use dev_pm_ops instead of sysdev_class in that series only. Due to the above, the GPIO driver implicitly relies on CM_AUTOIDLE = 1 on its iclk for power management to work, since the driver never disables its iclk. This would be taken care in the next patch series (see Note 3 below). Refer to http://www.mail-archive.com/linux-omap@vger.kernel.org/msg39112.html for more details. Note 3: only pm_runtime_get_sync is called in gpio's probe() and pm_runtime_put* is never called. This is to make the implementation similar to the existing GPIO code. Another patch series would be sent to correct this. In OMAP3 and OMAP4 gpio's debounce clocks are optional clocks. They are enabled/ disabled whenever required using clock framework APIs TODO: 1. Cleanup the GPIO driver. Use function pointers and register offest pointers instead of using hardcoded values 2. Remove all cpu_is_ checks and OMAP specific macros 3. Remove usage of gpio_bank array so that only instance specific information is used in driver code 4. Rename 'method'/ avoid it's usage 5. Fix the non-wakeup gpios handling for OMAP2430, OMAP3 & OMAP4 6. Modify gpio's prepare for idle/ resume after idle functions to use runtime pm implentation. Signed-off-by: Charulatha V <charu@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Basak, Partha <p-basak2@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> [tony@atomide.com: updated for bank specific revision and updated boards] Signed-off-by: Tony Lindgren <tony@atomide.com>
* | OMAP4: pandaboard: Select CBL & CBS package and initialize muxsricharan2010-11-17
|/ | | | | | | | | | | | | The mux framework allows the change of pad configuration by drivers when needed. Prior to this the mux framework has to be initialised with all the mux parameters specific to the board. The mux init is already present in the board file for SDP. Adding the mux init for panda boards. Signed-off-by: sricharan <r.sricharan@ti.com> Acked-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
* omap4: pandaboard: fix up mmc card detect logicMenon, Nishanth2010-10-28
| | | | | | | | | | | | | | | | | | | | | | For MMC1 Controller, card detect interrupt source is twl6030 which is non-gpio. The card detect call back function provides card present/absent status by reading MMC Control register present on twl6030. This functionality was introduced in mfd tree on track to kernel.org Sync pandaboard to the same and make mmc work. Cc: Tony Lindgren <tony@atomide.com> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Acked-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Tested-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Madhusudhan Chikkature <madhu.cr@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* Merge branch 'omap-for-linus' of ↵Linus Torvalds2010-10-25
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (163 commits) omap: complete removal of machine_desc.io_pg_offst and .phys_io omap: UART: fix wakeup registers for OMAP24xx UART2 omap: Fix spotty MMC voltages ASoC: OMAP4: MCPDM: Remove unnecessary include of plat/control.h serial: omap-serial: fix signess error OMAP3: DMA: Errata i541: sDMA FIFO draining does not finish omap: dma: Fix buffering disable bit setting for omap24xx omap: serial: Fix the boot-up crash/reboot without CONFIG_PM OMAP3: PM: fix scratchpad memory accesses for off-mode omap4: pandaboard: enable the ehci port on pandaboard omap4: pandaboard: Fix the init if CONFIG_MMC_OMAP_HS is not set omap4: pandaboard: remove unused hsmmc definition OMAP: McBSP: Remove null omap44xx ops comment OMAP: McBSP: Swap CLKS source definition OMAP: McBSP: Fix CLKR and FSR signal muxing OMAP2+: clock: reduce the amount of standard debugging while disabling unused clocks OMAP: control: move plat-omap/control.h to mach-omap2/control.h OMAP: split plat-omap/common.c OMAP: McBSP: implement functional clock switching via clock framework OMAP: McBSP: implement McBSP CLKR and FSR signal muxing via mach-omap2/mcbsp.c ... Fixed up trivial conflicts in arch/arm/mach-omap2/ {board-zoom-peripherals.c,devices.c} as per Tony
| * Merge branch 'control_mcbsp_fix_2.6.37' of git://git.pwsan.com/linux-2.6 ↵Tony Lindgren2010-10-08
| |\ | | | | | | | | | into omap-for-linus
| | * OMAP: control: move plat-omap/control.h to mach-omap2/control.hPaul Walmsley2010-10-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Only OMAP2+ platforms have the System Control Module (SCM) IP block. In the past, we've kept the SCM header file in plat-omap. This has led to abuse - device drivers including it; includes being added that create implicit dependencies on OMAP2+ builds; etc. In response, move the SCM headers into mach-omap2/. As part of this, remove the direct SCM access from the OMAP UDC driver. It was clearly broken. The UDC code needs an indepth review for use on OMAP2+ chips. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Cory Maccarrone <darkstar6262@gmail.com> Cc: Kyungmin Park <kyungmin.park@samsung.com>
| * | omap4: pandaboard: enable the ehci port on pandaboardDavid Anders2010-10-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | The OMAP4 PandaBoard has EHCI port1 hooked up to an external SMSC3320 transciever. GPIO 1 is used to power on the transceiver and GPIO 62 for reset on the transceiver. Signed-off-by: David Anders <x0132446@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | omap4: pandaboard: Fix the init if CONFIG_MMC_OMAP_HS is not setDavid Anders2010-10-08
| | | | | | | | | | | | | | | | | | | | | | | | Avoid possible crash if CONFIG_MMC_OMAP_HS is not set. Signed-off-by: David Anders <x0132446@ti.com> Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | omap4: pandaboard: remove unused hsmmc definitionDavid Anders2010-10-08
| |/ | | | | | | | | | | | | | | | | | | remove the second hsmmc definition as it is only used on the expansion header of the PandaBoard and can be mux for other functions. Signed-off-by: David Anders <x0132446@ti.com> Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * OMAP2plus: Fix static function warningsManjunath Kondaiah G2010-10-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes sparse warnings due non declarations of static functions. arch/arm/mach-omap2/timer-gp.c:115:12: warning: symbol 'omap2_gp_clockevent_set_gptimer' was not declared. Should it be static? arch/arm/mach-omap2/powerdomain.c:993:5: warning: symbol 'pwrdm_set_lowpwrstchange' was not declared. Should it be static? arch/arm/mach-omap2/board-flash.c:141:8: warning: symbol 'board_nand_init' was not declared. Should it be static? arch/arm/mach-omap2/board-n8x0.c:416:6: warning: symbol 'n8x0_mmc_slot1_cover_handler' was not declared. Should it be static? arch/arm/mach-omap2/board-n8x0.c:544:13: warning: symbol 'n8x0_mmc_init' was not declared. Should it be static? arch/arm/mach-omap2/board-rx51-peripherals.c:902:13: warning: symbol 'rx51_peripherals_init' was not declared. Should it be static? arch/arm/mach-omap2/board-rx51-video.c:107:13: warning: symbol 'rx51_video_mem_init' was not declared. Should it be static? arch/arm/mach-omap2/board-zoom-debugboard.c:155:12: warning: symbol 'zoom_debugboard_init' was not declared. Should it be static? arch/arm/mach-omap2/board-zoom-peripherals.c:280:13: warning: symbol 'zoom_peripherals_init' was not declared. Should it be static? arch/arm/mach-omap2/board-igep0020.c:110:13: warning: symbol 'igep2_flash_init' was not declared. Should it be static? arch/arm/mach-omap2/board-am3517evm.c:109:6: warning: symbol 'am3517_evm_ethernet_init' was not declared. Should it be static? drivers/mtd/onenand/omap2.c:577:5: warning: symbol 'omap2_onenand_rephase' was not declared. Should it be static? Signed-off-by: Manjunath Kondaiah G <manjugk@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * Merge branch 'devel-boards' into omap-for-linusTony Lindgren2010-09-27
| |\
| | * omap4: board-omap4panda: adding leds status1 and status2Ricardo Salveti de Araujo2010-09-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | At Pandaboard we have 2 status leds, so adding them with similar usage as we have for Beagleboard (heartbeat and mmc0). The patch basically adds the platform data required by leds-gpio driver. Signed-off-by: Ricardo Salveti de Araujo <ricardo.salveti@canonical.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | omap: mmc: extended to pass host capabilities from board fileSukumar Ghorai2010-09-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | wires variable is renamed, extended and this single variable to be used to pass the platform capabilities, e.g DDR mode. Also removed the hardcoded value was using as bus-width. Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | omap2: fix assorted compiler warningsSanjeev Premi2010-09-23
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes these compiler warnings: CC arch/arm/mach-omap2/mux.o arch/arm/mach-omap2/mux.c: In function 'omap_mux_init_gpio': arch/arm/mach-omap2/mux.c:90: warning: 'gpio_mux' may be used uninitial ized in this function CC arch/arm/plat-omap/gpio.o arch/arm/plat-omap/gpio.c: In function 'omap2_gpio_resume_after_idle': arch/arm/plat-omap/gpio.c:2152: warning: 'l' may be used uninitialized in this function arch/arm/plat-omap/gpio.c: In function 'omap2_gpio_prepare_for_idle': arch/arm/plat-omap/gpio.c:2085: warning: 'l2' may be used uninitialized in this function arch/arm/plat-omap/gpio.c:2085: warning: 'l1' may be used uninitialized in this function CC arch/arm/mach-omap2/board-omap4panda.o arch/arm/mach-omap2/board-omap4panda.c: In function 'omap4_panda_init': arch/arm/mach-omap2/board-omap4panda.c:277: warning: unused variable 's tatus' Signed-off-by: Sanjeev Premi <premi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* / arm: remove machine_desc.io_pg_offst and .phys_ioNicolas Pitre2010-10-20
|/ | | | | | | | | | | | | | | Since we're now using addruart to establish the debug mapping, we can remove the io_pg_offst and phys_io members of struct machine_desc. The various declarations were removed using the following script: grep -rl MACHINE_START arch/arm | xargs \ sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }' [ Initial patch was from Jeremy Kerr, example script from Russell King ] Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Eric Miao <eric.miao at canonical.com>
* omap4: Add OMAP4 Panda SupportDavid Anders2010-08-02
Add initial support for the OMAP4 based Panda Board. Signed-off-by: David Anders <x0132446@ti.com> [tony@atomide.com: selected board by default in Kconfig] Signed-off-by: Tony Lindgren <tony@atomide.com>