aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arc/boot
Commit message (Collapse)AuthorAge
* ARC: [arcfpga] Early ARC UART to be only activated by cmdlineVineet Gupta2014-06-03
| | | | | | | | | | | | | | Earlier CONFIG_SERIAL_ARC_CONSOLE would unconditionally enable the legacy ARC UART based early console even if platform lacked that UART (e.g. nSIM OSCI platform). So a multi-platform image containing the 2 UART drivers won't work. Fix that by probing the driver only if "earlyprintk=ttyARC0" is present in cmdline. Reported-by: Chuck Jordan <cjordan@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
* ARC: [nsimosci] Unbork consoleVineet Gupta2014-04-05
| | | | | | | | | | | | Despite the switch to right UART driver (prev patch), serial console still doesn't work due to missing CONFIG_SERIAL_OF_PLATFORM Also fix the default cmdline in DT to not refer to out-of-tree ARC framebuffer driver for console. Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: <stable@vger.kernel.org> #3.10, 3.12, 3.13, 3.14 Cc: Francois Bedard <Francois.Bedard@synopsys.com>
* ARC: [nsimosci] Change .dts to use generic 8250 UARTMischa Jonker2014-04-05
| | | | | | | | | | | | The Synopsys APB DW UART has a couple of special features that are not in the System C model. In 3.8, the 8250_dw driver didn't really use these features, but from 3.9 onwards, the 8250_dw driver has become incompatible with our model. Signed-off-by: Mischa Jonker <mjonker@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: <stable@vger.kernel.org> #3.10, 3.12, 3.13, 3.14 Cc: Francois Bedard <Francois.Bedard@synopsys.com>
* ARC: Remove unused DT template fileVineet Gupta2014-03-31
| | | | | | | Commit abe11ddea1d759f9 "Enabling DeviceTree for Angel4 board" made angel4.dts as default leaving the orphan skeleton file behind. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
* ARC: add uImage to .gitignoreMischa Jonker2014-03-26
| | | | | Signed-off-by: Mischa Jonker <mjonker@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
* ARC: Add perf support for ARC700 coresMischa Jonker2013-11-11
| | | | | | | | | This adds basic perf support for ARC700 cores. Most PERF_COUNT_HW* events are supported now. Signed-off-by: Mischa Jonker <mjonker@synopsys.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
* ARC: [TB10x] Updates for GPIO and pinctrlChristian Ruppert2013-11-10
| | | | | | | Device tree and Kconfig updates for GPIO and pinctrl drivers. Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
* ARC: Add some .gitignore entriesVineet Gupta2013-08-26
| | | | Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
* Merge tag 'arc-v3.11-rc1-part2' of ↵Linus Torvalds2013-07-10
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull second set of ARC architecture updates from Vineet Gupta: "Couple of Platform updates (Device Tree files primarily) given that the corresponding drivers (net/ethernet/arc/*, irqctl/irq-tb10x.c) have now been merged into your tree. Ideally these shd have been part of same submissions, oh well..." * tag 'arc-v3.11-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: [TB10x] Updates for irqchip driver ARC: [plat-arcfpga] Enable arc_emac for ARCAngle4 Board
| * ARC: [TB10x] Updates for irqchip driverChristian Ruppert2013-06-28
| | | | | | | | | | | | | | Device tree and Kconfig updates for irqchip driver. Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
| * ARC: [plat-arcfpga] Enable arc_emac for ARCAngle4 BoardAlexey Brodkin2013-06-28
| | | | | | | | | | | | | | | | | | | | | | * Add arc_emac to DeviceTree DT description "Documentation/devicetree/bindings/net/arc_emac.txt". * Update defconfig correspondingly [vgupta: tweaked changelog] Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
* | i2c-designware: make SDA hold time configurableChristian Ruppert2013-06-26
|/ | | | | | | | | This patch makes the SDA hold time configurable through device tree. Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com> Signed-off-by: Pierrick Hascoet <pierrick.hascoet@abilis.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> for arch/arc bits Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* ARC: [TB10x] Remove redundant abilis,simple-pinctrl mechanismChristian Ruppert2013-05-15
| | | | | | | | | | | | | | | | The TB10x platform port includes a custom mechanism using to set up default pin controller configurations using abilis,simple-default pin configurations of nodes compatible with abilis,simple-pinctrl. This mechanism is redundant with the Linux standard "default" pin configuration, see commit ab78029ecc347debbd737f06688d788bd9d60c1d "drivers/pinctrl: grab default handles from device core". This patch removes the TB10x custom mechanism in favour of the Linux standard. Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
* ARC: Add support for nSIM OSCI System C modelMischa Jonker2013-05-07
| | | | | | | | | | | | This adds support for an ARC Virtual Platform. This platform is based on the System C standard promoted by the OSCI (Open System C Initiative) and uses nSIM to simulate the ARC CPU core itself. Users can build a virtual SoC by combining System C models of peripherals and CPU cores. Signed-off-by: Mischa Jonker <mjonker@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
* ARC: [TB10x] Adapt device tree to new compatible stringChristian Ruppert2013-05-07
| | | | | | | | | | The original device tree was written using a slightly different implementation of the fixed-factor-clock device tree binding. The compatible string must be modified in order to be compatible with the new implementation. Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
* ARC: [TB10x] Device tree of TB100 and TB101 Development KitsChristian Ruppert2013-05-07
| | | | | | | | | | | These are the device tree files for the Abilis Systems TB100 and TB101 ICs and their respective development kit PCBs. These files are committed in preparation of the following patch set which adds support for these chips to the ARC platform. Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com> Signed-off-by: Pierrick Hascoet <pierrick.hascoet@abilis.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
* ARC: [kbuild] Avoid DTB rebuilds if DTS are untouchedVineet Gupta2013-04-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, for every ARC kernel build I see the following: --------------->8----------------- DTB arch/arc/boot/dts/angel4.dtb.S AS arch/arc/boot/dts/angel4.dtb.o LD arch/arc/boot/dts/built-in.o rm arch/arc/boot/dts/angel4.dtb.S <-- forces rebuild next iter CHK kernel/config_data.h --------------->8----------------- This is because *.dts.S is intermediate file in dtb generation and is by default deleted by make which needs a ".SECONDARY" hint to NOT do so. This could have ideally been done in scripts/Makefile.lib - for benefit of all, however .SECONDARY doesn't seem to work with wildcards. Thanks to Stephen for suggesting .SECONDARY (vs .PRECIOUS) and making that work using a non wildcard version in arch makefile. Thanks to James Hogan for pointing out that *.dtb.S now needs to be added to clean-files Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
* ARC: [build] Allow uncompressed uImageVineet Gupta2013-04-09
| | | | | | | | | | | The existing uImage target always generates gzip compressed image which drags bootup for some very slow FPGA customer boards. So introduce seperate make targets:uImage.{bin,gz} with uncompressed being default. Also tie gz generation to CONFIG_KERNEL_GZIP, which a platform can select in it's Kconfig if it wishes gz to be default. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
* ARC: [build] cleanup Makefile a bitVineet Gupta2013-04-09
| | | | Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
* ARC: [plat-arcfpga] DT arc-uart bindings change: "baud" => "current-speed"Vineet Gupta2013-02-15
| | | | | | Per Grant's review comment - driver changes via tty tree Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
* ARC: [plat-arcfpga]: Enabling DeviceTree for Angel4 boardVineet Gupta2013-02-15
| | | | | | | | | | | | | | | | | * arc-uart platform device now populated dynamically, using of_platform_populate() - applies to any other device whatsoever. * uart in turn requires incore arc-intc to be also present in DT * A irq-domain needs to be instantiated for IRQ requests by DT probed device (e.g. arc-uart) TODO: switch over to linear irq domain once all devs have been transitioned to DT Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Arnd Bergmann <arnd@arndb.de>
* ARC: [DeviceTree] Convert some Kconfig items to runtime valuesVineet Gupta2013-02-15
| | | | | | | | | * mem size now runtime configured (prev CONFIG_ARC_PLAT_SDRAM_SIZE) * core cpu clk runtime configured (prev CONFIG_ARC_PLAT_CLK) Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca>
* ARC: [DeviceTree] Basic supportVineet Gupta2013-02-15
| | | | | | | | | | | | | | | | | | | | This is minimal infrastructure needed for devicetree work. It uses an a sample "skeleton" devicetree - embedded in kernel image - to print the board, manufacturer by parsing the top-level "compatible" string. As of now we don't need any additional "board" specific "machine_desc". TODO: support interpreting the command line as boot-loader passed dtb Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: devicetree-discuss@lists.ozlabs.org Cc: Rob Herring <rob.herring@calxeda.com> Cc: James Hogan <james.hogan@imgtec.com> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: James Hogan <james.hogan@imgtec.com>
* ARC: Build system: Makefiles, Kconfig, Linker scriptVineet Gupta2013-02-11
Arnd in his review pointed out that arch Kconfig organisation has several deficiencies: * Build time entries for things which can be runtime extracted from DT (e.g. SDRAM size, core clk frequency..) * Not multi-platform-image-build friendly (choice .. endchoice constructs) * cpu variants support (750/770) is exclusive. The first 2 have been fixed in subsequent patches. Due to the nature of the 750 and 770, it is not possible to build for both together, w/o special runtime glue code which would hurt performance. Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Sam Ravnborg <sam@ravnborg.org>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-23 01:34:15 -0500