aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation
Commit message (Collapse)AuthorAge
* [PATCH] Further alterations for memory barrier documentDavid Howells2006-06-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From: David Howells <dhowells@redhat.com> Apply some alterations to the memory barrier document that I worked out with Paul McKenney of IBM, plus some of the alterations suggested by Alan Stern. The following changes were made: (*) One of the examples given for what can happen with overlapping memory barriers was wrong. (*) The description of general memory barriers said that a general barrier is a combination of a read barrier and a write barrier. This isn't entirely true: it implies both, but is more than a combination of both. (*) The first example in the "SMP Barrier Pairing" section was wrong: the loads around the read barrier need to touch the memory locations in the opposite order to the stores around the write barrier. (*) Added a note to make explicit that the loads should be in reverse order to the stores. (*) Adjusted the diagrams in the "Examples Of Memory Barrier Sequences" section to make them clearer. Added a couple of diagrams to make it more clear as to how it could go wrong without the barrier. (*) Added a section on memory speculation. (*) Dropped any references to memory allocation routines doing memory barriers. They may do sometimes, but it can't be relied on. This may be worthy of further documentation later. (*) Made the fact that a LOCK followed by an UNLOCK should not be considered a full memory barrier more explicit and gave an example. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Paul E. McKenney <paulmck@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [SERIAL] Update parity handling documentationPeter Korsgaard2006-06-02
| | | | | | | | Update documentation to match reality. INPCK controls whether input parity checking is enabled. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvbLinus Torvalds2006-05-21
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (33 commits) V4L/DVB (3965): Fix CONFIG_VIDEO_VIVI=y build bug V4L/DVB (3964): Bt8xx/bttv-cards.c: fix off-by-one errors V4L/DVB (3914): Vivi build fix V4L/DVB (3912): Sparc32 vivi fix V4L/DVB (3832): Get_dvb_firmware: download nxt2002 firmware from new driver location V4L/DVB (3829): Fix frequency values in the ranges structures of the LG TDVS H06xF tuners V4L/DVB (3826): Saa7134: Missing 'break' in Terratec Cinergy 400 TV initialization V4L/DVB (3825): Remove broken 'fast firmware load' from cx25840. V4L/DVB (3819): Cxusb-bluebird: bug-fix: power down corrupts frontend V4L/DVB (3813): Add support for TCL M2523_5N_E tuner. V4L/DVB (3804): Tweak bandselect setup fox cx24123 V4L/DVB (3803): Various correctness fixes to tuning. V4L/DVB (3797): Always wait for diseqc queue to become ready before transmitting a diseqc message V4L/DVB (3796): Add several debug messages to cx24123 code V4L/DVB (3795): Fix for CX24123 & low symbol rates V4L/DVB (3792): Kbuild: DVB_BT8XX must select DVB_ZL10353 V4L/DVB (3790): Use after free in drivers/media/video/em28xx/em28xx-video.c V4L/DVB (3788): Fix compilation with V4L1_COMPAT V4L/DVB (3782): Removed uneeded stuff from pwc Makefile V4L/DVB (3775): Add VIVI Kconfig stuff ...
| * V4L/DVB (3832): Get_dvb_firmware: download nxt2002 firmware from new driver ↵Michael Krufky2006-05-12
| | | | | | | | | | | | | | | | | | | | | | location BBTI has updated their driver, and removed the old one from their website. This patch updates the get_dvb_firmware script to download the firmware from the new driver location. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* | [PATCH] drivers/base/firmware_class.c: cleanupsAdrian Bunk2006-05-21
| | | | | | | | | | | | | | | | | | | | | | | | | | - remove the following global function that is both unused and unimplemented: - register_firmware() - make the following needlessly global function static: - firmware_class_uevent() Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | Merge master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds2006-05-19
|\ \ | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] s3c2410_wdt.c stop watchdog after boot [WATCHDOG] i8xx_tco.c - remove support for ICH6 + ICH7 [WATCHDOG] Documentation/watchdog/watchdog-api.txt - fix watchdog daemon [WATCHDOG] sc1200wdt.c printk fix
| * | [WATCHDOG] Documentation/watchdog/watchdog-api.txt - fix watchdog daemonRandy Dunlap2006-05-15
| |/ | | | | | | | | | | | | | | | | | | Fix the simple watchdog daemon program in Doc/watchdog/watchdog-api.txt to build cleanly. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@osdl.org>
* | [PATCH] sbp2: consolidate workaroundsStefan Richter2006-05-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Grand unification of the three types of workarounds we have so far. The "skip mode page 8" workaround is now limited to devices which pretend to be of TYPE_DISK instead of TYPE_RBC. This workaround is no longer enabled for Initio bridges. Patch update in anticipation of more workarounds: - Add module parameter "workarounds". - Deprecate parameter "force_inquiry_hack". - Compose the blacklist of a compound type for better readability and extensibility. - Remove a now unused #define. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] SPI: busnum == 0 needs to workDavid Brownell2006-05-16
| | | | | | | | | | | | | | | | | | | | | | | | | | We need to be able to have a "SPI bus 0" matching chip numbering; but that number was wrongly used to flag dynamic allocation of a bus number. This patch resolves that issue; now negative numbers trigger dynamic alloc. It also updates the how-to-write-a-controller-driver overview to mention this stuff. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | [PATCH] SPI: add PXA2xx SSP SPI DriverStephen Street2006-05-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This driver turns a PXA2xx synchronous serial port (SSP) into a SPI master controller (see Documentation/spi/spi_summary). The driver has the following features: - Support for any PXA2xx SSP - SSP PIO and SSP DMA data transfers. - External and Internal (SSPFRM) chip selects. - Per slave device (chip) configuration. - Full suspend, freeze, resume support. Signed-off-by: Stephen Street <stephen@streetfiresound.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | [PATCH] devices.txt: remove pktcdvd entryPeter Osterlund2006-05-15
| | | | | | | | | | | | | | | | | | | | | | | | Changing the driver to use dynamic device numbers was one of the many changes that were made in order to have the driver accepted into the mainline kernel. Therefore I would say that the entry in devices.txt is obsolete. This patch removes it. Signed-off-by: Peter Osterlund <petero2@telia.com> Cc: Torben Mathiasen <device@lanana.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] Fix typos in Documentation/memory-barriers.txtAneesh Kumar2006-05-15
|/ | | | | | | | | Fix some typos in Documentation/memory-barriers.txt Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@gmail.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2006-05-11
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NET_SCHED]: HFSC: fix thinko in hfsc_adjust_levels() [IPV6]: skb leakage in inet6_csk_xmit [BRIDGE]: Do sysfs registration inside rtnl. [NET]: Do sysfs registration as part of register_netdevice. [TG3]: Fix possible NULL deref in tg3_run_loopback(). [NET] linkwatch: Handle jiffies wrap-around [IRDA]: Switching to a workqueue for the SIR work [IRDA]: smsc-ircc: Minimal hotplug support. [IRDA]: Removing unused EXPORT_SYMBOLs [IRDA]: New maintainer. [NET]: Make netdev_chain a raw notifier. [IPV4]: ip_options_fragment() has no effect on fragmentation [NET]: Add missing operstates documentation.
| * [NET]: Add missing operstates documentation.Stefan Rompf2006-05-09
| | | | | | | | | | Signed-off-by: Stefan Rompf <stefan@loplof.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds2006-05-11
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (25 commits) [SCSI] mptfc: race between mptfc_register_dev and mptfc_target_alloc [SCSI] lpfc 8.1.6 : Fix Data Corruption in Bus Reset Path [SCSI] mptspi: revalidate negotiation parameters after host reset and resume [SCSI] srp.h: avoid padding of structs [SCSI] ibmvscsi: fix leak when failing to send srp event [SCSI] qla2xxx: Correct eh_abort recovery logic. [SCSI] megaraid_{mm,mbox}: fix a bug in reset handler [SCSI] fusion - bug fix stack overflow in mptbase [SCSI] scsi: Add IBM 2104-DU3 to blist [SCSI] Fix DVD burning issues. [SCSI] SCSI: aic7xxx_osm_pci resource leak fix. [SCSI] - fusion - mptfc bug fix's to prevent deadlock situations [SCSI] mptfusion: bug fix's for raid components adding/deleting [SCSI] aic7xxx: ahc_pci_write_config() fix [SCSI] megaraid: unused variable [SCSI] qla2xxx: only free_irq() after request_irq() succeeds [SCSI] Overrun in drivers/scsi/sim710.c [SCSI] lpfc 8.1.5 : Change version number to 8.1.5 [SCSI] lpfc 8.1.5 : Misc small fixes [SCSI] lpfc 8.1.5 : Additional fixes to LOGO, PLOGI, and RSCN processing ...
| * [SCSI] megaraid_{mm,mbox}: fix a bug in reset handlerJu, Seokmann2006-04-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When abort failed, the driver gets reset handleer called. In the reset handler, driver calls 'scsi_done()' callback for same SCSI command packet (struct scsi_cmnd) multiple times if there are multiple SCSI command packet in the pend_list. More over, if there are entry in the pend_lsit with IOCTL packet associated, the driver returns it to wrong free_list so that, in turn, the driver could end up with 'NULL pointer dereference..' during I/O command building with incorrect resource. Also, the patch contains several minor/cosmetic changes besides this. Signed-off-by: Seokmann Ju <seokmann.ju@lsil.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/perex/alsaLinus Torvalds2006-05-01
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/perex/alsa: (22 commits) [ALSA] via82xx - Use DXS_SRC as default for VIA8235/8237/8251 chips [ALSA] hda-codec - Add model entry for ASUS Z62F [ALSA] PCMCIA sound devices shouldn't depend on ISA [ALSA] hda-codec - Fix capture from line-in on VAIO SZ/FE laptops [ALSA] Fix Oops at rmmod with CONFIG_SND_VERBOSE_PROCFS=n [ALSA] PCM core - introduce CONFIG_SND_PCM_XRUN_DEBUG [ALSA] adding __devinitdata to pci_device_id [ALSA] add __devinitdata to all pci_device_id [ALSA] hda-codec - Add codec id for AD1988B codec chip [ALSA] hda-codec - Add model entry for ASUS M9 laptop [ALSA] pcxhr - Fix a compiler warning on 64bit architectures [ALSA] via82xx: tweak VT8251 workaround [ALSA] intel8x0 - Disable ALI5455 SPDIF-input [ALSA] via82xx: add support for VIA VT8251 (AC'97) [ALSA] Fix typos and add information about Jack support to Audiophile-Usb.txt [ALSA] Fix double free in error path of miro driver [ALSA] hda-codec - Add entry for Epox EP-5LDA+ GLi [ALSA] sound/pci/: remove duplicate #include's [ALSA] hda-codec - Use model 'hp' for all HP laptops with AD1981HD [ALSA] continue on IS_ERR from platform device registration ...
| * | [ALSA] adding __devinitdata to pci_device_idKenrik Kretzschmar2006-04-27
| | | | | | | | | | | | | | | | | | | | | | | | Refering to <kernelsource>/Documentation/pci.txt the struct pci_device_id can be released after loading the module. Signed-off-by: Kenrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | [ALSA] Fix typos and add information about Jack support to Audiophile-Usb.txtCharis Kouzinopoulos2006-04-27
| | | | | | | | | | | | | | | | | | Signed-off-by: Charis Kouzinopoulos <kouzinopoulos@gmail.com> Signed-off-by: Thibault Le Meur <Thibault.LeMeur@supelec.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | [PATCH] suspend: Documentation update for IBM Thinkpad X30Antonino A. Daplas2006-04-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As reported in Bugzilla Bug 6406, resume from S3 results in a blank screen. For the IBM Thinkpad X30 using vesafb as the console driver, successful resume from S3 requires option acpi_sleep=s3_bios,s3_mode. Update documentation. I would presume that, in any hardware, using vesafb as the console driver will require as a minimum s3_mode. Signed-off-by: Antonino Daplas <adaplas@pol.net> Cc: <igor47@uchicago.edu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds2006-04-27
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: [PATCH] PCI quirk: VIA IRQ fixup should only run for VIA southbridges [PATCH] PCI: fix potential resource leak in drivers/pci/msi.c [PATCH] PCI: Documentation: no more device ids [PATCH] PCI: fix via irq SATA patch
| * | | [PATCH] PCI: Documentation: no more device idsIngo Oeser2006-04-27
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | Document that we don't like to add more PCI device ids but are happy to accept PCI vendor ids for linux/include/pci_ids.h Original text from Jeff Garzik. Signed-off-by: Ingo Oeser <netdev@axxeo.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* / / [PATCH] Added URI of "linux kernel development process"Paolo Ciarrocchi2006-04-27
|/ / | | | | | | | | Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | [doc] add paragraph about 'fs' subsystem to sysfs.txtMiklos Szeredi2006-04-26
| | | | | | | | Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
* | Merge branch 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-blockLinus Torvalds2006-04-20
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block: [PATCH] block/elevator.c: remove unused exports [PATCH] splice: fix smaller sized splice reads [PATCH] Don't inherit ->splice_pipe across forks [patch] cleanup: use blk_queue_stopped [PATCH] Document online io scheduler switching
| * | [PATCH] Document online io scheduler switchingValdis Kletnieks2006-04-20
| |/ | | | | | | | | | | | | | | | | | | We added the ability to change a block device's IO elevator scheduler both at kernel boot and on-the-fly, but we only documented the elevator= boot parameter. Add a quick how-to on doing it on the fly. Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jens Axboe <axboe@suse.de>
* / [PATCH] update OBSOLETE_OSS_DRIVER schedule and dependenciesAdrian Bunk2006-04-20
|/ | | | | | | | | | | | | | | | | | | | | Update the schedule for the removal of drivers depending on OBSOLETE_OSS_DRIVER as follows: - adjust OBSOLETE_OSS_DRIVER dependencie - from the release of 2.6.16 till the release of 2.6.17: approx. two months for users to report problems with the ALSA drivers for the same hardware - after the release of 2.6.17 (and before 2.6.18): remove the subset of drivers marked at OBSOLETE_OSS_DRIVER without known regressions in the ALSA drivers for the same hardware Additionally, correct some OBSOLETE_OSS_DRIVER dependencies. A rationale of the changes is in http://lkml.org/lkml/2006/1/28/135 Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Doc: vm/hugetlbpage update-2Randy Dunlap2006-04-19
| | | | | | | | | | | | Add new line of /proc/meminfo output. Explain the HugePage_ lines in /proc/meminfo (from Bill Irwin). Change KB to kB since the latter is what is used in the kernel. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge ../linusDave Jones2006-04-18
|\
| * [SERIAL] Update serial driver documentationRussell King2006-04-15
| | | | | | | | | | | | | | | | | | | | | | | | | | Improve serial driver documentation: - Remove CVS id. - Update pointer to reference driver documentation. - Add comments about new uart_write_console function. - Add TIOCM_LOOP modem control bit description. - Add commentry about enable_ms method being called multiple times. - Add commentry about startup/shutdown method calling. - Mention that dereferencing port->info after shutdown is invalid. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2006-04-14
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (170 commits) commit 3d9dd7564d5d7c28eb87b14c13a23806484667f3 Author: Zach Brown <zach.brown@oracle.com> Date: Fri Apr 14 16:04:18 2006 -0700 [PATCH] ip_output: account for fraggap when checking to add trailer_len During other work I noticed that ip_append_data() seemed to be forgetting to include the frag gap in its calculation of a fragment that consumes the rest of the payload. Herbert confirmed that this was a bug that snuck in during a previous rework. Signed-off-by: Zach Brown <zach.brown@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> commit 08d099974a09faf4cb11ffc46da87073fa132fc0 Author: Linus Walleij <triad@df.lth.se> Date: Fri Apr 14 16:03:33 2006 -0700 [IRDA]: smsc-ircc2, smcinit support for ALi ISA bridges ...
| | * [XFRM]: Add documentation for async events.Jamal Hadi Salim2006-04-14
| | | | | | | | | | | | | | | | | | | | | | | | Documentation to describe asynchronous xfrm events to help people writting HA code in user space. Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/i2c-2.6Linus Torvalds2006-04-14
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/gregkh/i2c-2.6: (78 commits) commit e97b81ddbb8b8c72b85330ac4a454a4513dcba8a Author: Mark M. Hoffman <mhoffman@lightlink.com> Date: Thu Mar 23 16:50:25 2006 +0100 [PATCH] i2c-parport: Make type parameter mandatory This patch forces the user to specify what type of adapter is present when loading i2c-parport or i2c-parport-light. If none is specified, the driver init simply fails - instead of assuming adapter type 0. This alleviates the sometimes lengthy boot time delays which can be caused by accidentally building one of these into a kernel along with several i2c slave drivers that have lengthy probe routines (e.g. hwmon drivers). Kconfig and documentation updated accordingly. Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> ...
| | * | [PATCH] i2c-parport: Make type parameter mandatoryMark M. Hoffman2006-04-14
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch forces the user to specify what type of adapter is present when loading i2c-parport or i2c-parport-light. If none is specified, the driver init simply fails - instead of assuming adapter type 0. This alleviates the sometimes lengthy boot time delays which can be caused by accidentally building one of these into a kernel along with several i2c slave drivers that have lengthy probe routines (e.g. hwmon drivers). Kconfig and documentation updated accordingly. Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * / [PATCH] dma doc updatesDavid Brownell2006-04-14
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This updates the DMA API documentation to address a few issues: - The dma_map_sg() call results are used like pci_map_sg() results: using sg_dma_address() and sg_dma_len(). That's not wholly obvious to folk reading _only_ the "new" DMA-API.txt writeup. - Buffers allocated by dma_alloc_coherent() may not be completely free of coherency concerns ... some CPUs also have write buffers that may need to be flushed. - Cacheline coherence issues are now mentioned as being among issues which affect dma buffers, and complicate/prevent using of static and (especially) stack based buffers with the DMA calls. I don't think many drivers currently need to worry about flushing write buffers, but I did hit it with one SOC using external SDRAM for DMA descriptors: without explicit writebuffer flushing, the on-chip DMA controller accessed descriptors before the CPU completed the writes. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuildLinus Torvalds2006-04-11
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: kconfig: fix typo in change count initialization kconfig: recenter menuconfig kconfig: revert conf behaviour change kconfig: fix default value for choice input kbuild: fix NULL dereference in scripts/mod/modpost.c kbuild: fix mode of checkstack.pl and other files. kbuild: rebuild initramfs if content of initramfs changes kbuild: properly pass options to hostcc when doing make O=.. kbuild: modules_install for external modules must not remove existing modules kbuild: fix make dir/ ver_linux: don't print reiser4progs version if none found kbuild: mips: fix sed regexp to generate asm-offset.h kbuild: fix building single targets with make O=.. single-target kbuild: use relative path to -I kbuild: fix unneeded rebuilds in drivers/net/chelsio after moving source tree kbuild: fix unneeded rebuilds in drivers/media/video after moving source tree kbuild: fix garbled text in modules.txt
| | * kbuild: fix garbled text in modules.txtBrian Gerst2006-04-04
| | | | | | | | | | | | | | | Signed-off-by: Brian Gerst <bgerst@didntduck.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
| * | Merge branch 'splice' of git://brick.kernel.dk/data/git/linux-2.6-blockLinus Torvalds2006-04-11
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'splice' of git://brick.kernel.dk/data/git/linux-2.6-block: [PATCH] vfs: add splice_write and splice_read to documentation [PATCH] Remove sys_ prefix of new syscalls from __NR_sys_* [PATCH] splice: warning fix [PATCH] another round of fs/pipe.c cleanups [PATCH] splice: comment styles [PATCH] splice: add Ingo as addition copyright holder [PATCH] splice: unlikely() optimizations [PATCH] splice: speedups and optimizations [PATCH] pipe.c/fifo.c code cleanups [PATCH] get rid of the PIPE_*() macros [PATCH] splice: speedup __generic_file_splice_read [PATCH] splice: add direct fd <-> fd splicing support [PATCH] splice: add optional input and output offsets [PATCH] introduce a "kernel-internal pipe object" abstraction [PATCH] splice: be smarter about calling do_page_cache_readahead() [PATCH] splice: optimize the splice buffer mapping [PATCH] splice: cleanup __generic_file_splice_read() [PATCH] splice: only call wake_up_interruptible() when we really have to [PATCH] splice: potential !page dereference [PATCH] splice: mark the io page as accessed
| | * | [PATCH] vfs: add splice_write and splice_read to documentationPekka J Enberg2006-04-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the new splice_write and splice_read file operations to Documentation/filesystems/vfs.txt. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Jens Axboe <axboe@suse.de>
| * | | [PATCH] isdn4linux: Siemens Gigaset drivers: add READMETilman Schmidt2006-04-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With Hansjoerg Lipp <hjlipp@web.de> Add a README file for the Siemens Gigaset drivers to the Documentation/isdn directory. Signed-off-by: Hansjoerg Lipp <hjlipp@web.de> Signed-off-by: Tilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
| * | | [PATCH] Improve data-dependency memory barrier example in documentationDavid Howells2006-04-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the memory barrier document, improve the example of the data dependency barrier situation by: (1) showing the initial values of the variables involved; and (2) repeating the instruction sequence description, this time with the data dependency barrier actually shown to make it clear what the revised sequence actually is. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
| * | | [PATCH] Fix memory barrier docs wrt atomic opsDavid Howells2006-04-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the memory barrier documentation to attempt to describe atomic ops correctly. atomic_t ops that return a value _do_ imply smp_mb() either side, and so don't actually require smp_mb__*_atomic_*() special barriers. Also explains why special barriers exist in addition to normal barriers. Further fix the memory barrier documents to portray bitwise operation memory barrier effects correctly following Nick Piggin's comments. It makes the point that any atomic op that both modifies some state in memory and returns information on that state implies memory barriers on both sides. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
| * | | [PATCH] Doc: fix mtrr userspace programs to build cleanlyRandy Dunlap2006-04-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix mtrr-add.c and mtrr-show.c in Doc/mtrr.txt to build cleanly. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
| * | | [PATCH] docs: laptop-mode.txt source file buildRandy Dunlap2006-04-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix C source file in Doc/laptop-mode.txt to compile. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
| * | | [PATCH] Last DMA_xBIT_MASK cleanupsTobias Klauser2006-04-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These are the last conversions of pci_set_dma_mask(), pci_set_consistent_dma_mask() and pci_dma_supported() to use DMA_xBIT_MASK constants from linux/dma-mapping.h Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
| * | | [PATCH] the scheduled unexport of panic_timeoutAdrian Bunk2006-04-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement the scheduled unexport of panic_timeout. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
| * | | [PATCH] hugetlbfs doc. updateRandy Dunlap2006-04-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix typos, spelling, etc., in Doc/vm/hugetlbpage.txt. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
| * | | [PATCH] move ->eh_strategy_handler to the transport classChristoph Hellwig2006-04-10
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Overriding the whole EH code is a per-transport, not per-host thing. Move ->eh_strategy_handler to the transport class, same as ->eh_timed_out. Downside is that scsi_host_alloc can't check for the total lack of EH anymore, but the transition period from old EH where we needed it is long gone already. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * / [PATCH] x86_64: Reserve SRAT hotadd memory on x86-64Andi Kleen2006-04-09
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From: Keith Mannthey, Andi Kleen Implement memory hotadd without sparsemem. The memory in the SRAT hotadd area is just preserved instead and can be activated later. There are a few restrictions: - Only one continuous hotadd area allowed per node The main problem is dealing with the many buggy SRAT tables that are out there. The strategy here is to reject anything suspicious. Originally from Keith Mannthey, with several hacks and changes by AK and also contributions from Andrew Morton [ TBD: Problems pointed out by KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>: 1) Goto's rebuild_zonelist patch will not work if CONFIG_MEMORY_HOTPLUG=n. Rebuilding zonelist is necessary when the system has just memory < 4G at boot, and hot add memory > 4G. because x86_64 has DMA32, ZONE_NORAML is not included into zonelist at boot time if system doesn't have memory >4G at boot. [AK: should just force the higher zones at boot time when SRAT tells us] 2) zone and node's spanned_pages and present_pages are not incremented. They should be. For example, our server (ia64/Fujitsu PrimeQuest) can equip memory from 4G to 1T(maybe 2T in future), and SRAT will *always* say we have possible 1T +memory. (Microsoft requires "write all possible memory in SRAT") When we reserve memmap for possible 1T memory, Linux will not work well in +minimum 4G configuraion ;) [AK: needs limiting to 5-10% of max memory] ] Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
| * Merge master.kernel.org:/pub/scm/linux/kernel/git/perex/alsaLinus Torvalds2006-04-02
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa: (28 commits) [ALSA] Kconfig SND_SEQUENCER_OSS help text fix [ALSA] Add Aux input switch control for Aureon Universe [ALSA] pcxhr - Fix the crash with REV01 board [ALSA] sound/pci/hda: use create_singlethread_workqueue() [ALSA] hda-intel - Add support of ATI SB600 [ALSA] cs4281 - Fix the check of timeout in probe [ALSA] cs4281 - Fix the check of right channel [ALSA] Test volume resolution of usb audio at initialization [ALSA] maestro3.c: fix BUG, optimization [ALSA] HDA/Realtek: multiple input mux definitions and pin mode additions [ALSA] AdLib FM card driver [ALSA] Fix / clean up PCM-OSS setup hooks [ALSA] Clean up PCM codes (take 2) [ALSA] Tiny clean up of PCM codes [ALSA] ISA drivers bailing on first !enable[i] [ALSA] Remove obsolete kfree_nocheck call [ALSA] Remove obsolete kfree_nocheck call [ALSA] Add snd-als300 driver for Avance Logic ALS300/ALS300+ soundcards [ALSA] Add snd-riptide driver for Conexant Riptide chip [ALSA] hda-codec - Fix noisy output wtih AD1986A 3stack model ...