aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
* [PATCH] md: add support for reshape of a raid6NeilBrown2007-03-01
| | | | | | | | | | | | | | | | | | i.e. one or more drives can be added and the array will re-stripe while on-line. Most of the interesting work was already done for raid5. This just extends it to raid6. mdadm newer than 2.6 is needed for complete safety, however any version of mdadm which support raid5 reshape will do a good enough job in almost all cases (an 'echo repair > /sys/block/mdX/md/sync_action' is recommended after a reshape that was aborted and had to be restarted with an such a version of mdadm). Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] md: restart a (raid5) reshape that has been aborted due to a ↵NeilBrown2007-03-01
| | | | | | | | | | | | | | | | | | | read/write error An error always aborts any resync/recovery/reshape on the understanding that it will immediately be restarted if that still makes sense. However a reshape currently doesn't get restarted. With this patch it does. To avoid restarting when it is not possible to do work, we call into the personality to check that a reshape is ok, and strengthen raid5_check_reshape to fail if there are too many failed devices. We also break some code out into a separate function: remove_and_add_spares as the indent level for that code was getting crazy. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] md: clean out unplug and other queue function on md shutdownNeilBrown2007-03-01
| | | | | | | | | The mddev and queue might be used for another array which does not set these, so they need to be cleared. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] md: move warning about creating a raid array on partitions of the ↵NeilBrown2007-03-01
| | | | | | | | | | | | | | | | | | one device md tries to warn the user if they e.g. create a raid1 using two partitions of the same device, as this does not provide true redundancy. However it also warns if a raid0 is created like this, and there is nothing wrong with that. At the place where the warning is currently printer, we don't necessarily know what level the array will be, so move the warning from the point where the device is added to the point where the array is started. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] md: RAID6: clean up CPUID and FPU enter/exit codeH. Peter Anvin2007-03-01
| | | | | | | | | | - Use kernel_fpu_begin() and kernel_fpu_end() - Use boot_cpu_has() for feature testing even in userspace Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] md: fix raid10 recovery problem.NeilBrown2007-03-01
| | | | | | | | | | | | | | | | | | | | There are two errors that can lead to recovery problems with raid10 when used in 'far' more (not the default). Due to a '>' instead of '>=' the wrong block is located which would result in garbage being written to some random location, quite possible outside the range of the device, causing the newly reconstructed device to fail. The device size calculation had some rounding errors (it didn't round when it should) and so recovery would go a few blocks too far which would again cause a write to a random block address and probably a device error. The code for working with device sizes was fairly confused and spread out, so this has been tided up a bit. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] Fix failure paths in modules init in umem.cNeilBrown2007-03-01
| | | | | | | | | | | | If register_blkdev() or alloc-disk fail in mm_init() after pci_register_driver() succeeds, then mm_pci_driver is not unregistered properly: Cc: Philip Guo <pg@cs.stanford.edu> Signed-off-by: Neil Brown <neilb@suse.de> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] drivers/video/sm501fb.c: make 4 functions staticAdrian Bunk2007-03-01
| | | | | | | Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] mm/{,tiny-}shmem.c cleanupsAdrian Bunk2007-03-01
| | | | | | | | | | shmem_{nopage,mmap} are no longer used in ipc/shm.c Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] make ipc/shm.c:shm_nopage() staticAdrian Bunk2007-03-01
| | | | | | | | | shm_nopage() can become static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] arch/arm26/kernel/entry.S: remove dead codeAdrian Bunk2007-03-01
| | | | | | | | | CONFIG_ALIGNMENT_TRAP is never set on arm26. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Ian Molton <spyro@f2s.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] x86_64/i386 irq: Fix !CONFIG_SMP compilationEric W. Biederman2007-02-28
| | | | | | | | | | | | | | | | | | | | | | When removing set_native_irq I missed the fact that it was called in a couple of places that were compiled even when SMP support is disabled. And since the irq_desc[].affinity field only exists in SMP things broke. Thanks to Simon Arlott <simon@arlott.org> for spotting this. There are a couple of ways to fix this but the simplest one is to just remove the assignments. The affinity field is only used to display a value to the user, and nothing on either i386 or x86_64 reads it or depends on it being any particlua value, so skipping the assignment is safe. The assignment that is being removed is just for the initial affinity value before the user explicitly sets it. The irq_desc array initializes this field to CPU_MASK_ALL so the field is initialized to a reasonable value in the SMP case without being set. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Linux 2.6.21-rc2v2.6.21-rc2Linus Torvalds2007-02-27
| | | | | | Too many changes for comfort since -rc1. Some missed merges, and some just annoyingly big fixes since. This is not how an -rc2 should look. Need to really calm things down!
* [SPARC64]: Fix PCI interrupts on E450 et al.David S. Miller2007-02-27
| | | | | | | | | | | When the PCI controller OBP node lacks an interrupt-map and interrupt-map-mask property, we need to form the INO by hand. The PCI swizzle logic was not doing that properly. This was a regression added by the of_device code. Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgartLinus Torvalds2007-02-27
|\ | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart: [AGPGART] fix compile errors
| * [AGPGART] fix compile errorsRyusuke Konishi2007-02-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes the following compile failures of agpgart drivers. These errors were inserted by the recent AGPGART constification patch. drivers/char/agp/uninorth-agp.c:492: error: expected '{' before 'const' drivers/char/agp/uninorth-agp.c:517: error: expected '{' before 'const' drivers/char/agp/uninorth-agp.c: In function 'agp_uninorth_probe': drivers/char/agp/uninorth-agp.c:634: error: 'u3_agp_driver' undeclared (first use in this function) drivers/char/agp/uninorth-agp.c:634: error: (Each undeclared identifier is reported only once drivers/char/agp/uninorth-agp.c:634: error: for each function it appears in.) drivers/char/agp/uninorth-agp.c:636: error: 'uninorth_agp_driver' undeclared (first use in this function) Signed-off-by: Ryusuke Konishi <ryusuke@osrg.net> Signed-off-by: Dave Jones <davej@redhat.com>
* | Merge branch 'upstream-linus' of ↵Linus Torvalds2007-02-27
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (52 commits) netxen: do_rom_fast_write error handling natsemi: Fix detection of vanilla natsemi cards net: remove a collection of unneeded #undef REALLY_SLOW_IO stuff chelsio: Fix non-NAPI compile cxgb3 - Feed Rx free list with pages cxgb3 - Recovery from HW starvation of response queue entries. cxgb3 - Unmap offload packets when they are freed cxgb3 - FW version update cxgb3 - private ioctl cleanup cxgb3 - manage sysfs attributes per port S2IO: Restoring the mac address in s2io_reset S2IO: Avoid printing the Enhanced statistics for Xframe I card. S2IO: Making LED off during LINK_DOWN notification. S2IO: Added a loadable parameter to enable or disable vlan stripping in frame. S2IO: Optimized the delay to wait for command completion S2IO: Fixes for MSI and MSIX qla3xxx: Bumping driver version number qla3xxx: Kernic Panic on pSeries under stress conditions qla3xxx: bugfix tx reset after stress conditions. qla3xxx: Check return code from pci_map_single() in ql_release_to_lrg_buf_free_list(), ql_populate_free_queue(), ql_alloc_large_buffers(), and ql3xxx_send() ...
| * | netxen: do_rom_fast_write error handlingStephen Hemminger2007-02-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Compiler warning spots real error! The function do_rom_fast_read called in do_rom_fast_write can fail and leave data1 unset. This causes a compile warning. The correct thing is to propagate the error out. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | natsemi: Fix detection of vanilla natsemi cardsMark Brown2007-02-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bob Tracy <rct@gherkin.frus.com> reported that the addition of support for Aculab E1/T1 cPCI carrier cards broke detection of vanilla natsemi cards. This patch fixes that: the problem is that the driver-specific ta in the PCI device table is an index into a second table and this had not been updated for the vanilla cards. This patch fixes the problem minimally. Signed-Off-By: Mark Brown <broonie@sirena.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | net: remove a collection of unneeded #undef REALLY_SLOW_IO stuffAlan2007-02-27
| | | | | | | | | | | | | | | Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | chelsio: Fix non-NAPI compileRoland Dreier2007-02-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Chelsio without NAPI enabled has been broken (won't compile) since 3de00b89 ("chelsio: NAPI speed improvement"): drivers/net/chelsio/sge.c: In function `t1_interrupt`: drivers/net/chelsio/sge.c:1716: error: `Q` undeclared (first use in this function) The change below seems to add back in the declaration and initialization of `Q` that was removed by mistake, and at least makes the driver compile for me, although I have no hardware and hence no way to test whether this actually works. Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | cxgb3 - Feed Rx free list with pagesDivy Le Ray2007-02-27
| | | | | | | | | | | | | | | | | | | | | Populate Rx free list with pages. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | cxgb3 - Recovery from HW starvation of response queue entries.Divy Le Ray2007-02-27
| | | | | | | | | | | | | | | | | | | | | Improve the traffic recovery after the HW ran out of response queue entries. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | cxgb3 - Unmap offload packets when they are freedDivy Le Ray2007-02-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | Offload packets may be DMAed long after their SGE Tx descriptors are done so they must remain mapped until they are freed rather than until their descriptors are freed. Unmap such packets through an skb destructor. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | cxgb3 - FW version updateDivy Le Ray2007-02-27
| | | | | | | | | | | | | | | | | | | | | Update FW version to 3.2 Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | cxgb3 - private ioctl cleanupDivy Le Ray2007-02-27
| | | | | | | | | | | | | | | | | | | | | Clean up some private ioctls. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | cxgb3 - manage sysfs attributes per portDivy Le Ray2007-02-27
| | | | | | | | | | | | | | | | | | | | | sysfs attributes are now managed per port, no longer per adapter. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | S2IO: Restoring the mac address in s2io_resetSivakumar Subramani2007-02-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Restore in s2io_reset, the mac address assigned during s2io_open. Earlier, it was getting overwritten to the factory default (read from the eeprom) and subsequently dropping received frames. - Fixed the typo in calling rtnl_unlock in s2io_set_link function. Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | S2IO: Avoid printing the Enhanced statistics for Xframe I card.Sivakumar Subramani2007-02-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | - Enhanced Statistics are supported only for Xframe II (Herculas) card. Add condition check such Enhanced statistics will included only in the case of Xframe II card. Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | S2IO: Making LED off during LINK_DOWN notification.Sivakumar Subramani2007-02-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | - Turning off LED for LINK_DOWN notification - Return from rxd_owner_bit_reset function if call to set_rxd_buffer_pointer fails with ENOMEM Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | S2IO: Added a loadable parameter to enable or disable vlan stripping in frame.Sivakumar Subramani2007-02-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Added code to not to strip vlan tag when driver is in promiscuous mode - Added module loadable parameter 'vlan_tag_strip" through which user can enable or disable vlan stripping irrespective of mode ( promiscuous or non-promiscuous ). Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | S2IO: Optimized the delay to wait for command completionSivakumar Subramani2007-02-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Optimized delay to wait for command completion so as to reduce the initialization wait time. - Disable differentiated services steering. By default RMAC is configured to steer traffic with certain DS codes to other queues. Driver must initialize the DS memory to 0 to make sure that DS steering will not be used by default. Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | S2IO: Fixes for MSI and MSIXSivakumar Subramani2007-02-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Added debug statements to print a debug message if the MSI/MSI-X vector (or) data is zero. - This patch removes the code that will enable NAPI for the case of single ring and MSI-X / MSI case. There are some issue in the enabling NAPI with MSI/MSI-X. So we are turning off NAPI in the case of MSI/MSI-X. Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | qla3xxx: Bumping driver version numberBenjamin Li2007-02-27
| | | | | | | | | | | | | | | | | | Signed-off-by: Benjamin Li <benjamin.li@qlogic.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | qla3xxx: Kernic Panic on pSeries under stress conditionsBenjamin Li2007-02-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To reproduce this panic consistently, we run an intensive network application like 'netperf'. After waiting for a couple of seconds, you will see a stack trace and a kernel panic where we are calling pci_unmap_single() in ql_poll(). Changes: 1) Check the flags on the Response MAC IO Control block to check for errors 2) Ensure that if we are on the 4022 we only use one segment 3) Before, we were reading the memory mapped producer index register everytime we iterated in the loop when clearing the queue. We should only be iterating to a known point, not as the producer index is being updated. Signed-off-by: Benjamin Li <benjamin.li@qlogic.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | qla3xxx: bugfix tx reset after stress conditions.Ron Mercer2007-02-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To Reproduce the Problem: To reproduce this panic consistently, we run an intensive network application like 'netperf' and then switch to a different console. After waiting for a couple of seconds, you will see a tx reset has occured. Reason: We enable interrupts even if we were not running. Solution: Now we will enable interrupts only after we are ready to give up the poll routine. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | qla3xxx: Check return code from pci_map_single() in ↵Benjamin Li2007-02-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ql_release_to_lrg_buf_free_list(), ql_populate_free_queue(), ql_alloc_large_buffers(), and ql3xxx_send() pci_map_single() could fail. We need to properly check the return code from pci_map_single(). If we can not properly map this address, then we should cleanup and return the proper return code. Signed-off-by: Benjamin Li <benjamin.li@qlogic.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | qla3xxx: bugfix: Fixed jumbo frame handling for 3032 chip.Ron Mercer2007-02-27
| | | | | | | | | | | | | | | | | | | | | | | | The scatter/gather lists were not being build correctly. When large frames spanned several buffers the chip would panic. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | qla3xxx: Clean up receive process.Ron Mercer2007-02-27
| | | | | | | | | | | | | | | Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | qla3xxx: Dynamically size the rx buffer queue based on the MTU.Ron Mercer2007-02-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | This change removes use of constants for rx buffer queue size and instead calculates the queue length based on what he MTU is set to. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | qla3xxx: Remove API to change MTU.Ron Mercer2007-02-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This network device driver shares the same hardware as the qla4xxx iSCSI driver. Changing the MTU via the device interface will cause qla4xxx to crash as there is no way to make notification. Users wishing to change the MTU must do so using an iSCSI utility such as Qlogic SanSurfer. This forces the user to unload/reload this network device driver after the MTU value has been changed in flash. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | qla3xxx: Fix deadlock issue on error pathsBenjamin Li2007-02-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1) Fix deadlock issue when in QL_RESET_ACTIVE state and traversing through the Link State Machine 2) Fix deadlock issue when ethtool would call ql_get_settings() 3) Fix deadlock issue when adaptor is ifup'ed but adaptor fails to initialize Signed-off-by: Benjamin Li <benjamin.li@qlogic.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | qla3xxx: Changed to use netdev_alloc_skb() from dev_alloc_skbBenjamin Li2007-02-27
| | | | | | | | | | | | | | | | | | Signed-off-by: Benjamin Li <benjamin.li@qlogic.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | qla3xxx: Remove unnecessary memset() in qla3xxx_send()Benjamin Li2007-02-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We do not need to zero out the 64 byte MAC request I/O control block. By zeroing out the control block and setting it to proper fields is redundant work. This is because in the qla3xxx_send() function we will already set the proper fields in this structure. The unused fields are not looked at by the hardware and do not need to be zeroed out. Signed-off-by: Benjamin Li <benjamin.li@qlogic.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | qla3xxx: Return proper error codes when the 4022/4032 is being probedBenjamin Li2007-02-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The return code was not properly set when when allocating memory or mapping memory failed. Depending on the stack, the return code would sometimes return 0, which indicates everything was ok, when in fact there was an error. This would cause trouble when the module was removed. Now, we will pass back the proper return code when an error occurs during the PCI probe. Signed-off-by: Benjamin Li <benjamin.li@qlogic.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | Alignment in mv643xx_ethRalf Baechle2007-02-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver contains this little piece of candy: #if defined(CONFIG_DMA_NONCOHERENT) || defined(CONFIG_NOT_COHERENT_CACHE) #define ETH_DMA_ALIGN L1_CACHE_BYTES #else #define ETH_DMA_ALIGN 8 #endif Any reason why we're not using dma_get_cache_alignment() instead? Ralf Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | sgiseeq: Don't include unnecessary headerfiles.Ralf Baechle2007-02-27
| | | | | | | | | | | | | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | ucc_geth: use of_get_mac_address()Timur Tabi2007-02-27
| | | | | | | | | | | | | | | | | | | | | | | | Update ucc_geth_probe() to use function of_get_mac_address() to obtain the MAC address. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | skge: comma consistencyStephen Hemminger2007-02-27
| | | | | | | | | | | | | | | | | | | | | Use comma's consistently. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | skge: fix transmitter flow controlStephen Hemminger2007-02-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It looks like the skge driver inherited another bug from the sk98lin code. If I send from 1000mbit port to a machine on 100mbit port, the switch should be doing hardware flow control, but no pause frames show up in the statistics. This is the analog of the recent sky2 fixes. The device needs to listen for multicast pause frames and then not discard them. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-22 05:17:24 -0500