aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
* ath9k_hw: fix PA predistortion HT40 maskFelix Fietkau2010-12-20
| | | | | | | | | | | | | | | | | | | | The commit 'ath9k_hw: Disable PAPRD for rates with low Tx power' changed the code that sets the PAPRD rate masks to use only either the HT20 mask or the HT40 mask. This is wrong, as the hardware can still use HT20 rates even when configured for HT40, and the operating channel mode does not affect PAPRD operation. The register for the HT40 rate mask is applied as a mask on top of the other registers to selectively disable PAPRD for specific rates on HT40 packets only. This patch changes the code back to the old behavior which matches the intended use of these registers. While with current cards this should not make any practical difference (according to Atheros, the HT20 and HT40 mask should always be equal), it is more correct that way, and maybe the HT40 mask will be used for some rare corner cases in the future. Cc: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: fix potentially redundant skb data copyingFelix Fietkau2010-12-20
| | | | | | | | | | | When an skb is shared, it needs to be duplicated, along with its data buffer. If the skb does not have enough headroom, using skb_copy might cause the data buffer to be copied twice (once by skb_copy and once by pskb_expand_head). Fix this by using skb_clone initially and letting ieee80211_skb_resize sort out the rest. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: skip unnecessary pskb_expand_head callsFelix Fietkau2010-12-20
| | | | | | | | If the skb is not cloned and we don't need any extra headroom, there is no point in reallocating the skb head. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: fix initialization of skb->cb in ieee80211_subif_start_xmitFelix Fietkau2010-12-20
| | | | | | | | | | The change 'mac80211: Fix BUG in pskb_expand_head when transmitting shared skbs' added a check for copying the skb if it's shared, however the tx info variable still points at the cb of the old skb Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1251: wl12xx_get_platform_data() returns an ERR_PTRDan Carpenter2010-12-20
| | | | | | | | | wl12xx_get_platform_data() returns an ERR_PTR on failure and it never returns a NULL. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Kalle Valo <kvalo@adurom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: Fix use of mutex in interrupt codeLarry Finger2010-12-20
| | | | | | | | | A previous conversion from semaphoreto mutexes missed the fact that one of the semaphores was used in interrupt code. Fixed by changing to a spinlock. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* MAINTAINERS: Fix typo in rtl8192ce entryLarry Finger2010-12-20
| | | | | Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Properly initialize channel table for 2GHzMohammed Shafi Shajakhan2010-12-20
| | | | | | | | | | ath9k channel table for 2Ghz does not seems to initialize the 'band' parameter.Though it does not seems to cause any visible issue it looks odd when we initialize the 'band' parameter for 5Ghz channel table while not so for 2Ghz. Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtl8192ce: Fix typo in Kconfig descriptionAnisse Astier2010-12-20
| | | | | Signed-off-by: Anisse Astier <anisse@astier.eu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: remove baseband rfsilent supportFelix Fietkau2010-12-20
| | | | | | | | | | | When rfkill is enabled, ath9k_hw unnecessarily configured the baseband to turn off based on GPIO input, however that code was hardcoded to GPIO 0 instead of ah->rfkill_gpio. Since ath9k uses software rfkill anyway, this code is completely unnecessary and should be removed in case anything else ever uses GPIO 0. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: fix queue depth check for forming new aggregatesFelix Fietkau2010-12-20
| | | | | | | | | | | | | | To improve aggregation length, there should not be more than two fully formed A-MPDU frames in the hardware queue. To ensure this, the code checks the tx queue length before forming new A-MPDUs. This can reduce the throughput (or maybe even starve out A-MPDU traffic) when too many non-aggregated frames are in the queue. Fix this by keeping track of pending A-MPDU frames (even when they're sent out as single frames), but exclude rate control probing frames to improve performance. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtl8192ce: drop 'rtl8192c-' prefix from filesJohn W. Linville2010-12-20
| | | | | Signed-off-by: John W. Linville <linville@tuxdriver.com> Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
* mac80211: Remove unused third address from mesh address extension header.Javier Cardona2010-12-20
| | | | | | | | | | | | | | | | | | | The Mesh Control header only includes 0, 1 or 2 addresses. If there is one address, it should be interpreted as Address 4. If there are 2, they are interpreted as Addresses 5 and 6 (Address 4 being the 4th address in the 802.11 header). The address extension used to hold up to 3 addresses instead of the current 2. I'm not sure which draft version changed this, but it is very unlikely that it will change again given the state of the approval process of this draft. See section 7.1.3.6.3 in current draft (8.0). Also, note that the extra address that I'm removing was not being used, so this change has no effect on over-the-air frame formats. But I thought I better remove it before someone does start using it. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: Set available antenna information for cfg80211Bruno Randolf2010-12-20
| | | | | Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* nl80211: Export available antennasBruno Randolf2010-12-20
| | | | | | | | Export the information which antennas are available for configuration as TX or RX antennas via nl80211. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211: Separate available antennas for RX and TXBruno Randolf2010-12-20
| | | | | | | | | As has been pointed out by Daniel Halperin some devices (e.g. Intel IWL5100) can only TX from a subset of RX antennas, so use separate availability masks for RX and TX. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: Send mesh non-HWMP path selection frames to userspaceJavier Cardona2010-12-20
| | | | | | | | | Let path selection frames for protocols other than HWMP be sent to userspace via NL80211_CMD_REGISTER_FRAME. Also allow userspace to send and receive mesh path selection frames. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: Let userspace enable and configure vendor specific path selection.Javier Cardona2010-12-20
| | | | | | | | | | | | Userspace will now be allowed to toggle between the default path selection algorithm (HWMP, implemented in the kernel), and a vendor specific alternative. Also in the same patch, allow userspace to add information elements to mesh beacons. This is accordance with the Extensible Path Selection Framework specified in version 7.0 of the 802.11s draft. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: Rename mesh_params to mesh_config to prepare for mesh_setupJavier Cardona2010-12-20
| | | | | | | | | Mesh parameters can be to setup a mesh or to configure it. This patch renames the ambiguous name mesh_params to mesh_config in preparation for mesh_setup. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: Switch locking from semaphores to mutexesLarry Finger2010-12-16
| | | | | Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtl8192ce: Update MAINTAINERSLarry Finger2010-12-16
| | | | | Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: Fix surveyBruno Randolf2010-12-16
| | | | | | | | | | | | | | The old survey implementation was broken and returned nonsense data. Clear cycle counters and survey data on reset. Since the cycle counters easily overflow it's better to keep a local version of collected survey data (in ms resolution, instead of clockrate) and update this every time survey is retrieved. If survey is retrieved often enough to avoid cycle counter overflows this works fine, otherwise we could update survey more often, like ath9k does. Still only the survey for the current channel is kept. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtl8192ce: Fix build on powerpcLarry Finger2010-12-16
| | | | | | | | | | | | | | | After merge of the rtl8192ce driver, a powerpc build fails with: drivers/net/wireless/rtlwifi/rtl8192ce/rtl8192c-sw.c: In function 'rtl92c_init_sw_vars': drivers/net/wireless/rtlwifi/rtl8192ce/rtl8192c-sw.c:76: error: implicit declaration of function 'vmalloc' drivers/net/wireless/rtlwifi/rtl8192ce/rtl8192c-sw.c:76: warning: cast to pointer from integer of different size drivers/net/wireless/rtlwifi/rtl8192ce/rtl8192c-sw.c: In function 'rtl92c_deinit_sw_vars': drivers/net/wireless/rtlwifi/rtl8192ce/rtl8192c-sw.c:91: error: implicit declaration of function 'vfree' The problem is fixed by explicitly including the appropriate header. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath: fix NULL pointer dereference on reg_notifier()Luis R. Rodriguez2010-12-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The reg_notifier() was recently updated as being capable of having the request passed as NULL, fix ath to follow this API change. Without this we end up oopsing: BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 IP: [<ffffffffa02fb8cb>] ath_reg_notifier_apply+0x5b/0xa0 [ath] PGD b4c4c067 PUD b4c4d067 PMD 0 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC last sysfs file: /sys/devices/pci0000:00/0000:00:1b.0/uevent CPU 1 Modules linked in: <etc> Pid: 436, comm: modprobe Not tainted 2.6.37-rc5-wl+ #36 6460DWU/6460DWU RIP: 0010:[<ffffffffa02fb8cb>] [<ffffffffa02fb8cb>] ath_reg_notifier_apply+0x5b/0xa0 [ath] RSP: 0018:ffff8800b6f6baa8 EFLAGS: 00010246 RAX: ffff8800b527b254 RBX: ffff8800b532c180 RCX: 0000000000000018 RDX: ffff8800b530c108 RSI: 0000000000000000 RDI: ffff8800b532c180 RBP: ffff8800b6f6baa8 R08: ffff8800b532f268 R09: 0000000000000235 R10: 00000000000016ad R11: 0000000000000018 R12: 0000000000000000 R13: 0000000000000016 R14: ffff8800b532f268 R15: 0000000000000011 FS: 00007f0c53104700(0000) GS:ffff8800bed00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000004 CR3: 00000000b6531000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process modprobe (pid: 436, threadinfo ffff8800b6f6a000, task ffff8800b404dc40) Stack: ffff8800b6f6bac8 ffffffffa03ea651 ffff8800b532c180 ffff8800b527b254 ffff8800b6f6bb38 ffffffffa01835ca ffffffffa019ed00 00000000a019ed80 0000000000000002 ffff880000000002 ffffffffa0366140 0000000010aee572 Call Trace: [<ffffffffa03ea651>] ath9k_reg_notifier+0x41/0x50 [ath9k] [<ffffffffa01835ca>] wiphy_update_regulatory+0x4ba/0x5a0 [cfg80211] [<ffffffffa0366140>] ? ieee80211_register_hw+0xa0/0x5b0 [mac80211] [<ffffffffa0366140>] ? ieee80211_register_hw+0xa0/0x5b0 [mac80211] [<ffffffffa017f994>] wiphy_register+0x1d4/0x360 [cfg80211] [<ffffffff8114b918>] ? __kmalloc+0x108/0x1c0 [<ffffffffa0366223>] ieee80211_register_hw+0x183/0x5b0 [mac80211] [<ffffffffa03eb49b>] ath9k_init_device+0x66b/0x850 [ath9k] [<ffffffffa03f9dd6>] ath_pci_probe+0x2f6/0x3c0 [ath9k] [<ffffffff81037529>] ? default_spin_lock_flags+0x9/0x10 [<ffffffff812e19cf>] local_pci_probe+0x5f/0xd0 [<ffffffff812e2bf1>] pci_device_probe+0x101/0x120 [<ffffffff81390aca>] ? driver_sysfs_add+0x7a/0xb0 [<ffffffff81390c26>] driver_probe_device+0x96/0x1c0 [<ffffffff81390deb>] __driver_attach+0x9b/0xa0 [<ffffffff81390d50>] ? __driver_attach+0x0/0xa0 [<ffffffff81390008>] bus_for_each_dev+0x68/0x90 [<ffffffff81390a4e>] driver_attach+0x1e/0x20 [<ffffffff81390309>] bus_add_driver+0xe9/0x290 [<ffffffffa0407000>] ? ath9k_init+0x0/0x4d [ath9k] [<ffffffff81391130>] driver_register+0x80/0x150 [<ffffffffa0407000>] ? ath9k_init+0x0/0x4d [ath9k] [<ffffffffa0407000>] ? ath9k_init+0x0/0x4d [ath9k] [<ffffffff812e2e76>] __pci_register_driver+0x56/0xd0 [<ffffffffa03f9ec3>] ath_pci_init+0x23/0x30 [ath9k] [<ffffffffa040702b>] ath9k_init+0x2b/0x4d [ath9k] [<ffffffff81002053>] do_one_initcall+0x43/0x190 [<ffffffff8109fb5b>] sys_init_module+0xbb/0x200 [<ffffffff8100c042>] system_call_fastpath+0x16/0x1b Code: <who even reads this anyway? haha, ok you do> RIP [<ffffffffa02fb8cb>] ath_reg_notifier_apply+0x5b/0xa0 [ath] RSP <ffff8800b6f6baa8> CR2: 0000000000000004 ---[ end trace 6d03d3c7eda9f06b ]--- Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211: fix null pointer dereference with a custom regulatory requestLuis R. Rodriguez2010-12-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Once we moved the core regulatory request to the queue and let the scheduler process it last_request will have been left NULL until the schedular decides to process the first request. When this happens and we are loading a driver with a custom regulatory request like all Atheros drivers we end up with a NULL pointer dereference. We fix this by checking if the request was a custom one. BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 IP: [<ffffffffa016de87>] freq_reg_info_regd.clone.2+0x27/0x130 [cfg80211] PGD 71f91067 PUD 712b2067 PMD 0 Oops: 0000 [#1] PREEMPT SMP last sysfs file: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/firmware/2-1/loading CPU 0 Modules linked in: ath9k_htc(+) ath9k_common ath9k_hw ath <etc> Pid: 3094, comm: insmod Tainted: G W 2.6.37-rc5-wl #16 INVALID/28427ZQ RIP: 0010:[<ffffffffa016de87>] [<ffffffffa016de87>] freq_reg_info_regd.clone.2+0x27/0x130 [cfg80211] RSP: 0018:ffff88007045db78 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffffffa047d9a0 RCX: ffff88007045dbd0 RDX: 0000000000004e20 RSI: 000000000024cde0 RDI: ffff8800700483e0 RBP: ffff88007045db98 R08: ffffffffa02f5b40 R09: 0000000000000001 R10: 000000000000000e R11: 0000000000000001 R12: 0000000000000000 R13: ffff88007004e3b0 R14: 0000000000000000 R15: ffff880070048340 FS: 00007f635a707700(0000) GS:ffff880077400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000004 CR3: 00000000708a9000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process insmod (pid: 3094, threadinfo ffff88007045c000, task ffff8800713e3ec0) Stack: ffffffffa047d9a0 0000000000000000 ffff88007004e3b0 0000000000000000 ffff88007045dc08 ffffffffa016e147 000000007045dc08 0000000000000002 ffff8800700483e0 ffffffffa02f5b40 ffff88007045dbd8 0000000000000000 Call Trace: [<ffffffffa016e147>] wiphy_apply_custom_regulatory+0x137/0x1d0 [cfg80211] [<ffffffffa047a690>] ? ath9k_reg_notifier+0x0/0x50 [ath9k_htc] [<ffffffffa02f47f7>] ath_regd_init+0x347/0x430 [ath] [<ffffffffa047b1f5>] ath9k_htc_probe_device+0x6c5/0x960 [ath9k_htc] [<ffffffffa0472a2c>] ath9k_htc_hw_init+0xc/0x30 [ath9k_htc] [<ffffffffa04747e6>] ath9k_hif_usb_probe+0x216/0x3b0 [ath9k_htc] [<ffffffffa03bb6bc>] usb_probe_interface+0x10c/0x210 [usbcore] [<ffffffff812aec26>] driver_probe_device+0x96/0x1c0 [<ffffffff812aedf3>] __driver_attach+0xa3/0xb0 [<ffffffff812aed50>] ? __driver_attach+0x0/0xb0 [<ffffffff812adaae>] bus_for_each_dev+0x5e/0x90 [<ffffffff812ae8c9>] driver_attach+0x19/0x20 [<ffffffff812ae438>] bus_add_driver+0x168/0x320 [<ffffffff812af071>] driver_register+0x71/0x140 [<ffffffff811fc4a8>] ? __raw_spin_lock_init+0x38/0x70 [<ffffffffa03ba39c>] usb_register_driver+0xdc/0x190 [usbcore] [<ffffffffa03a2000>] ? ath9k_htc_init+0x0/0x4f [ath9k_htc] [<ffffffffa047499e>] ath9k_hif_usb_init+0x1e/0x20 [ath9k_htc] [<ffffffffa03a202b>] ath9k_htc_init+0x2b/0x4f [ath9k_htc] [<ffffffff8100212f>] do_one_initcall+0x3f/0x180 [<ffffffff8109ef5b>] sys_init_module+0xbb/0x200 [<ffffffff8100bf52>] system_call_fastpath+0x16/0x1b Code: <etc, who cares> RIP [<ffffffffa016de87>] freq_reg_info_regd.clone.2+0x27/0x130 [cfg80211] RSP <ffff88007045db78> CR2: 0000000000000004 ---[ end trace 79e4193601c8b713 ]--- Reported-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: Configure appropriate Tx power when PAPRD failsVasanthakumar Thiagarajan2010-12-16
| | | | | | | | | Target Tx power available in eeprom is for PAPRD. If PAPRD fails, paprd scale factor needs to be detected from this target tx power. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: Disable PAPRD for rates with low Tx powerVasanthakumar Thiagarajan2010-12-16
| | | | | | | | | When the drop in Tx power for a particular mcs rate exceeds the paprd scale factor, paprd may not work properly. Disable paprd for any such rates. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: Add a helper to get paprd scale factorVasanthakumar Thiagarajan2010-12-16
| | | | | Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: Tx IQ cal changes for AR9003Vasanthakumar Thiagarajan2010-12-16
| | | | | | | | Add multiple Tx IQ cal support to improve EVM accross different power levels. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: Move get_streams() to hw.hVasanthakumar Thiagarajan2010-12-16
| | | | | | | | This helper can be used in multiple places. Also make it inline returning u8. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: Remove unnecessary Rx IQ cal register configuration in ↵Vasanthakumar Thiagarajan2010-12-16
| | | | | | | ar9003_hw_tx_iq_cal() Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: Remove delay during regwrite of analog shift registersVasanthakumar Thiagarajan2010-12-16
| | | | | | | This is not needed for AR9003. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* nl80211: Add notification for dropped Deauth/DisassocJouni Malinen2010-12-16
| | | | | | | | | | | | | | | | | | | | Add a new notification to indicate that a received, unprotected Deauthentication or Disassociation frame was dropped due to management frame protection being in use. This notification is needed to allow user space (e.g., wpa_supplicant) to implement SA Query procedure to recover from association state mismatch between an AP and STA. This is needed to avoid getting stuck in non-working state when MFP (IEEE 802.11w) is used and a protected Deauthentication or Disassociation frame is dropped for any reason. After that, the station would silently discard any unprotected Deauthentication or Disassociation frame that could be indicating that the AP does not have association for the STA (when the Reason Code would be 6 or 7). IEEE Std 802.11w-2009, 11.13 describes this recovery mechanism. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge branch 'wl12xx-next' of ↵John W. Linville2010-12-16
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx
| * wl12xx_sdio_test: rename files to match current styleLuciano Coelho2010-12-15
| | | | | | | | | | | | | | | | | | | | | | Change some file names and Kconfig settings so that this new module matches the new way of using wl12xx instead of wl1271. Also fix SDIO power enabling and disabling to match the latest way of doing it. Cc: Roger Quadros <roger.quadros@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
| * wl12xx: Change TX queue to be per ACJuuso Oikarinen2010-12-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the current single-queue implementation traffic priorization is not working correctly - when using multiple BE streams and one, say VI stream, the VI stream will share bandwidth almost equally with the BE streams. To fix the issue, implement per AC queues, which are emptied in priority order to the firmware. To keep it relatively simple, maintain a global buffer count and global queue stop/wake instead of per-AC. With these changes, priorization appears to work just fine. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
| * wl12xx: allow runtime changing of debug_levelEliad Peller2010-12-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the debug level is set in compilation time (by the DEBUG_LEVEL const). This method has the advantage of compiling only the relevant messages, while optimizing out the unused ones. In order to allow runtime control over the debug_level, while optimizing out messages when debug messages are not needed, we combine some methods: 1. use dynamic_debug (pr_debug) rather then printk. 2. add debug_level module param in order to set debug level during insmod. 3. add debug_level sysfs file in order to allow dynamic control over the debug level. Since patches for pr_debug_hex_dump() implementation haven't been applied yet, we are still temporarly using print_hex_dump(). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
| * wl1271: fixed problem with WPS IEs in probe requestsGuy Eilam2010-12-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Inclusion of a WPS IE in probe requests caused a problem in the driver due to the maximum size of the probe request template and the max_scan_ie_len values at initialization. Increased the size of probe request template to the maximum size allowed by the firmware. Struct wl12xx_probe_req_template, which was only used for calculating the max size of the probe request template, is no longer used and needed. max_scan_ie_len is used for validating the size of additional IEs in scan requests. Initialized the max_scan_ie_len field to the maximum size of the probe request template minus the ieee80211 header size. Signed-off-by: Guy Eilam <guy@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
| * wl12xx: add auto-arp supportEliad Peller2010-12-15
| | | | | | | | | | | | | | | | | | | | | | | | The auto-arp feature of wl12xx allows the firmware to automatically response to arp requests asking for its ip. in order to use it, we configure the arp response template and enable the corresponding bit in wl1271_acx_arp_filter (along with passing its ip) Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
| * wl1271_sdio_test: Add module for sdio RX/TX testingRoger Quadros2010-12-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This module enables individually generating RX and TX traffic over the SDIO bus on which the WL1271 chipset is connected. This is required to perform RF interference testing. The module takes 2 module parameters 'rx' and 'tx'. To generate RX traffic: modprobe wl1271_sdio_test rx=1 To generate TX traffic: modprobe wl1271_sdio_test tx=1 To generate both RX & TX traffic, set both rx and tx to 1. You can change the testing configuration at runtime by changing the rx & tx values at /sys/modules/wl1271_sdio_test/ To stop testing simply unload the module. Signed-off-by: Roger Quadros <roger.quadros@nokia.com> Reviewed-by: Carlos Chinea <carlos.chinea@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
| * wl12xx: disable 11a channels when wl->enable_11a is knownLuciano Coelho2010-12-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Disabling the 11a channels when not supported in the reg_notify function was not working as it should, because when the driver is initiailizing (and registering itself with mac80211), it would get the reg notification too early. At that point the driver wouldn't have received the NVS yet, so it wouldn't know whether 11a was supported. To fix this, we disable 11a channels when we read the NVS instead. Also, it is easier (and still safe) to set n_channels to zero instead of setting the disabled flag on every 11a channel. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
| * wl12xx: Remove 11j channels from the supported channels list.Juuso Oikarinen2010-12-02
| | | | | | | | | | | | | | Because we don't support them at this stage. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
| * wl1271: Add wl1271_load_firmware() and export some functionsRoger Quadros2010-12-02
| | | | | | | | | | | | | | | | | | | | For the SDIO testing module we need to load the firmware but not boot it. wl1271_load_firmware() is meant to do just the firmware loading part. We also export some functions so they are usable in the testing module. Signed-off-by: Roger Quadros <roger.quadros@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
| * wl12xx: fix illegal memset if debugfs is not enabledLuciano Coelho2010-12-02
| | | | | | | | | | | | | | | | | | | | If we try to reset the debugfs statistics when debugfs is not configured in the kernel, we're memset an illegal pointer, because it has never been allocated. So check whether we have debugfs enabled by looking into the wl->rootdir before trying to reset the fw_stats struct. Reported-by: Joerie de Gram <j.de.gram@gmail.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
| * wl1271: move wl12xx debugfs directory to under wiphy's debugfsEliad Peller2010-12-02
| | | | | | | | | | | | | | | | | | | | | | Use per-device debugfs path, so multiple devices won't collide. in order to use wl->hw->wiphy->debugfsdir, we have to move the debugfs creation from wl1271_debugfs_init() to wl1271_register_hw(). Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
| * wl1271: use debugfs_remove_recursiveEliad Peller2010-12-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Documentation/filesystems/debugfs.txt: """ Once upon a time, debugfs users were required to remember the dentry pointer for every debugfs file they created so that all files could be cleaned up. We live in more civilized times now, though, and debugfs users can call: void debugfs_remove_recursive(struct dentry *dentry); """ Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
| * wl1271: Fix setting of the hardware connection monitoring probe-req templateJuuso Oikarinen2010-11-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The probe-request template used in the hardware connection monitoring feature thus far has been an empty one, without the SSID IE and without supported rate IEs. This causes problems with some AP's. Additionally, after connected scans, the template for connection maintenance would remain to be the one last used for scanning - potentially incorrect. Fix these by getting a pre-filled directed probe-request template for the associated-to AP from mac80211. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
| * wl12xx: disable 11a channels when regulatory changes if 11a is not supportedLuciano Coelho2010-11-26
| | | | | | | | | | | | | | | | | | | | | | | | | | Instead of simply not scanning for the 11a channels when not supported by the hardware, disable the channels in reg_notify. This centralizes the decision on whether to scan 5GHz channel in one place and allows userspace to know exactly which channels are in use. Based on Juuso Oikarinen's idea. Cc: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
| * wl12xx: Fix kernel crash related to hw recovery and interface shutdownJuuso Oikarinen2010-11-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | It is possible that the op_remove_interface function is invoked exactly at the same time has hw recovery is started. In this case it is possible for the interface to be already removed in the op_remove_interface call, which currently leads to a kernel warning and a subsequent kernel crash. Fix this by ignoring the op_remove_interface call if the interface is already down at that point. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Tested-by: Tuomas Katila <ext-tuomas.2.katila@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
* | iwlwifi: Fix error: struct iwl_lq_sta has no member named dbg_fixed_rateSedat Dilek2010-12-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While compiling linux-next (next-20101216) I fell over this breakage: ... drivers/net/wireless/iwlwifi/iwl-agn-rs.c: In function ‘iwl_rs_rate_init’: drivers/net/wireless/iwlwifi/iwl-agn-rs.c:2876:8: error: ‘struct iwl_lq_sta’ has no member named ‘dbg_fixed_rate’ dbg_fixed_rate is only used when CONFIG_MAC80211_DEBUGFS is set: [ drivers/net/wireless/iwlwifi/iwl-agn-rs.h ] ... #ifdef CONFIG_MAC80211_DEBUGFS struct dentry *rs_sta_dbgfs_scale_table_file; struct dentry *rs_sta_dbgfs_stats_table_file; struct dentry *rs_sta_dbgfs_rate_scale_data_file; struct dentry *rs_sta_dbgfs_tx_agg_tid_en_file; u32 dbg_fixed_rate; #endif The issue was introduced by commit a1da077bc36368eb7d6312e7e49260f0a3d92c77: "iwlwifi: clear dbg_fixed_rate during init" Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-09-24 08:23:34 -0400