aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
* ALSA: hda - Fix error handling in patch_ca0132.cTakashi Iwai2012-02-07
| | | | | | | | | In patch_ca0132.c, the error returned from chipio_write() isn't checked always. Also, the power-up/down sequence isn't tracked properly in some error paths. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge tag 'asoc-3.3' of ↵Takashi Iwai2012-02-07
|\ | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus The only particularly remarkable change here is the one for handling of the Android suspend ignore code for idle_bias_off CODECs. That one is actually a regression fix as some of the new power savings that have been introduced confused the suspend ignore code, making devices that are active for non-audio reasons look like they are idle causing them to be suspended instead of being kept active.
| * ASoC: wm_hubs: Correct line input to line output 2 pathsMark Brown2012-02-01
| | | | | | | | | | | | | | | | The second line output mixer has the controls for the line input bypasses in the opposite order. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
| * ASoC: cs42l73: Fix Output [X|A|V]SP_SCLK Sourcing Mode setting for master modeAxel Lin2012-02-01
| | | | | | | | | | | | | | | | For master mode, set Output [X|A|V]SP_SCLK Sourcing Mode to MCLK Mode. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: wm8962: Fix word length configurationSusan Gao2012-02-01
| | | | | | | | | | | | Signed-off-by: Susan Gao <sgao@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
| * ASoC: core: Better support for idle_bias_off suspend ignoresMark Brown2012-01-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If an idle_bias_off device is in any state other than off then it is still active for some reason (typically a low power function such as accessory detection). This wasn't an issue when the feature was implemented as we always went to _ON for any active function, subsequent power improvements have changed things. With the modern way of doing things we should overhaul the infrastructure to allow devices to explicitly take references for these functions but that's a much more invasive change and will require driver updates to deploy, this will bring the framework into line with the existing driver set before we do that work. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
| * ASoC: wm8994: Remove ASoC level register cache syncMark Brown2012-01-31
| | | | | | | | | | | | | | | | Now we've switched over to regmap the ASoC level cache sync will be ineffectual and potentially harmful as there is no longer an ASoC level cache. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: wm_hubs: Fix routing of input PGAs to line output mixerMark Brown2012-01-31
| | | | | | | | | | | | | | | | IN1L/R is routed to both line output mixers, we don't route IN1 to LINEOUT1 and IN2 to LINEOUT2. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
* | ALSA: hda/realtek - Fix a wrong conditionTakashi Iwai2012-02-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sparse complains that "spec->multiout.dac_nids" is a pointer. sound/pci/hda/patch_realtek.c:2321:37: error: incompatible types for operation (>) sound/pci/hda/patch_realtek.c:2321:37: left side has type unsigned short const [usertype] *dac_nids sound/pci/hda/patch_realtek.c:2321:37: right side has type int It was meant to be num_dacs instead of dac_nids. Although the current code still works as expected (when num_dacs is zero, dac_nids should be NULL, too), better to fix now, of course. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: emu8000: Remove duplicate linux/moduleparam.h include from emu8000_patch.cJesper Juhl2012-02-06
| | | | | | | | | | | | | | | | The header 'linux/moduleparam.h' is included twice in 'sound/isa/sb/emu8000_patch.c'. Once is enough. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda/realtek - Add missing Bass and CLFE as vmaster slavesTakashi Iwai2012-02-03
| | | | | | | | | | | | | | | | | | | | The recent changes in Realtek auto-parser added the new "Bass Speaker" and "CLFE" mixer elements which should be tracked as vmaster slaves, too. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42720 Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Disable dynamic-power control for VIA as defaultTakashi Iwai2012-02-02
| | | | | | | | | | | | | | | | | | | | Since the dynamic pin power-control and the analog low-current mode may lead to pop-noise, it's safer to set it off as default. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=741128 Cc: <stable@kernel.org> [v3.1+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Allow analog low-current mode when dynamic power-control is onTakashi Iwai2012-02-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | VIA codecs have several different power-saving features, and one of them is the analog low-current mode. But it turned out that the ALC mode causes pop-noises at each on/off time on some machines. As a quick workaround, disable the ALC when another power-saving feature, the dynamic pin power-control, is turned off, too, since the dynamic power-control is already exposed as a mixer enum element so that user can turn it on/off freely. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=741128 Cc: <stable@kernel.org> [v3.1+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Fix the logic to detect VIA analog low-current modeTakashi Iwai2012-02-02
| | | | | | | | | | | | | | | | | | | | The analog low-current mode must be enabled when the no stream is running but the current detection checks it in a wrong way. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=741128 Cc: <stable@kernel.org> [v3.1+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Check power-state before changing in patch_via.cTakashi Iwai2012-02-02
| | | | | | | | | | | | | | | | | | Instead of always writing AC_VERB_SET_POWER_STATE, check the current power-state and don't write again if the value is already set. This may reduce the click noise upon the dynamic power-state change (e.g. in analog-input mixer). Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: HDA: Fix duplicated output to more than one codecDavid Henningsson2012-02-01
| | | | | | | | | | | | | | | | | | | | | | This typo caused the wrong codec's nid to be checked for wcaps type. As a result, sometimes speakers would duplicate the output sent to HDMI output. Cc: stable@kernel.org BugLink: https://bugs.launchpad.net/bugs/924320 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Fix calling cs_automic twice for Cirrus codecs.Dylan Reid2012-02-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If cs_automic is called twice (like it is during init) while the mic is present, it will over-write the last_input with the new one, causing it to switch back to the automic input when the mic is unplugged. This leaves the driver in a state (cur_input, last_input, and automix_idx the same) where the internal mic can not be selected until it is rebooted without the mic attached. Check that the mic hasn't already been switched to before setting last_input. Signed-off-by: Dylan Reid <dgreid@chromium.org> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | Merge branch 'fix/asoc' into for-linusTakashi Iwai2012-01-31
|\ \
| * | Merge tag 'asoc-3.3' of ↵Takashi Iwai2012-01-30
| |\| | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into fix/asoc A bunch of small driver specific fixes - nothing terribly exciting here, all of this will only affect people using particular devices and then usually only in some use cases.
| | * ASoC: neo1973_wm8753: remove references to the neo1973-gta01 machineDenis 'GNUtoo' Carikli2012-01-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Openmoko GTA01 machine has been removed from the machine ID database, so we need to remove references to it as well. Without that fix we have: sound/soc/samsung/neo1973_wm8753.c: In function ‘neo1973_wm8753_init’: sound/soc/samsung/neo1973_wm8753.c:325:2: error: implicit declaration of function ‘machine_is_neo1973_gta01’ Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| | * ASoC: wm_hubs: fix wrong bits for LINEOUT2 N/P mixerUK KIM2012-01-27
| | | | | | | | | | | | | | | | | | Signed-off-by: UK KIM <w0806.kim@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
| | * ASoC: wm_hubs: Enable line out VMID buffer for single ended line outputsMark Brown2012-01-26
| | | | | | | | | | | | | | | | | | | | | | | | For optimal performance the single ended line outputs require that the line output VMID buffer be enabled. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
| | * ASoC: wm5100: Mark register cache as dirty when regulators are disabledMark Brown2012-01-25
| | | | | | | | | | | | | | | | | | Otherwise we won't resync later. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| | * ASoC: wm8962: Mark register cache as dirty when regulators are disabledMark Brown2012-01-25
| | | | | | | | | | | | | | | | | | Otherwise we won't resync later. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| | * ASoC: wm8996: Mark register cache as dirty when regulators are disabledMark Brown2012-01-25
| | | | | | | | | | | | | | | | | | Otherwise we won't resync later. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| | * ASoC: wm5100: Fix microphone configurationMark Brown2012-01-25
| | | | | | | | | | | | | | | | | | | | | | | | We need to write the configuration for each microphone to a different register. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
| | * ASoC: wm5100: Make sure we switch to button reporting modeMark Brown2012-01-25
| |/ | | | | | | | | | | | | | | When we have identified an accessory make sure we've flagged that we've done so in order to make sure we always report buttons and don't continue to polarity flip. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: wm2000: Fix use-after-free - don't release_firmware() twice on errorJesper Juhl2012-01-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In wm2000_i2c_probe(), if we take the true branch in " ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_wm2000, NULL, 0); if (ret != 0) goto err_fw; " then we'll release_firmware(fw) at the 'err_fw' label. But we've already done that just a few lines above. That's a use-after-free bug. This patch restructures the code so that we always call release_firmware(fw) before leaving the function, but only ever call it once. This means that we have to initialize 'fw' to NULL since some paths may now end up calling it without having called request_firmware(), but since request_firmware() deals gracefully with NULL pointers, we are fine if we just NULL initialize it. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: wm8958: Use correct format string in dev_err() callJesper Juhl2012-01-23
| | | | | | | | | | | | | | To print a value of type size_t one should use %zd, not %d. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: wm8996: Call _POST_PMU callback for CPVDDMark Brown2012-01-22
| | | | | | | | | | | | | | | | We should be allowing a 5ms delay after the charge pump is started in order to ensure it has finished ramping. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
| * ASoC: mxs: Fix mxs-saif timeoutFabio Estevam2012-01-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On a mx28evk board the following errors happens on mxs-sgtl5000 probe: [ 0.660000] saif0_clk_set_rate: divider writing timeout [ 0.670000] mxs-sgtl5000: probe of mxs-sgtl5000.0 failed with error -110 [ 0.670000] ALSA device list: [ 0.680000] No soundcards found. This timeout happens because clk_set_rate will result in writing to the DIV bits of register HW_CLKCTRL_SAIF0 with the saif clock gated (CLKGATE bit set to one). MX28 Reference states the following about CLKGATE: "The DIV field can change ONLY when this clock gate bit field is low." So call clk_prepare_enable prior to clk_set_rate to fix this problem. After this change the mxs-saif driver can be correctly probed and audio is functional. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: Disable register synchronisation for low frequency WM8996 SYSCLKMark Brown2012-01-20
| | | | | | | | | | | | | | | | | | With a low frequency SYSCLK and a fast I2C clock register synchronisation may occasionally take too long to take effect, causing I/O issues. Disable synchronisation in order to avoid any issues. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
| * ASoC: Don't go through cache when applying WM5100 rev A updatesMark Brown2012-01-20
| | | | | | | | | | | | | | | | | | These are all to either uncached registers or fixes to register defaults, in the former case the cache won't do anything and in the latter case we're fixing things so the cache sync will do the right thing. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
| * ASoC: Mark WM5100 register map cache only when going into BIAS_OFFMark Brown2012-01-20
| | | | | | | | | | | | | | | | Writing to the registers won't work if we do actually manage to hit a fully powered off state. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
| * ASoC: tlv320aic32x4: always enable analouge blockWolfram Sang2012-01-20
| | | | | | | | | | | | | | | | | | Register LDOCTLEN must always be initialized to clear the analog power control bit, otherwise the analog block will stay deactivated. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: tlv320aic32x4: always enable dividersWolfram Sang2012-01-20
| | | | | | | | | | | | | | | | | | | | Dividers (such as MDAC) are always needed, independent of the codec being I2S master or slave. Needed on a custom board where the codec has to be slave. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: sgtl5000: Fix wrong register name in restoreZeng Zhaoming2012-01-20
| | | | | | | | | | | | | | | | | | | | | | Correct SGTL5000_CHIP_CLK_CTRL to SGTL5000_CHIP_REF_CTRL in sgtl5000_restore_regs(), and add comment to explain the restore order. Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Zeng Zhaoming <zengzm.kernel@gmail.com> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * Linux 3.3-rc1Linus Torvalds2012-01-19
| |
| *---. Merge branches 'sched-urgent-for-linus', 'perf-urgent-for-linus' and ↵Linus Torvalds2012-01-19
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/accounting, proc: Fix /proc/stat interrupts sum * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tracepoints/module: Fix disabling tracepoints with taint CRAP or OOT x86/kprobes: Add arch/x86/tools/insn_sanity to .gitignore x86/kprobes: Fix typo transferred from Intel manual * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, syscall: Need __ARCH_WANT_SYS_IPC for 32 bits x86, tsc: Fix SMI induced variation in quick_pit_calibrate() x86, opcode: ANDN and Group 17 in x86-opcode-map.txt x86/kconfig: Move the ZONE_DMA entry under a menu x86/UV2: Add accounting for BAU strong nacks x86/UV2: Ack BAU interrupt earlier x86/UV2: Remove stale no-resources test for UV2 BAU x86/UV2: Work around BAU bug x86/UV2: Fix BAU destination timeout initialization x86/UV2: Fix new UV2 hardware by using native UV2 broadcast mode x86: Get rid of dubious one-bit signed bitfield
| | | | * x86, syscall: Need __ARCH_WANT_SYS_IPC for 32 bitsH. Peter Anvin2012-01-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In checkin 303395ac3bf3 x86: Generate system call tables and unistd_*.h from tables the feature macros in <asm/unistd.h> were unified between 32 and 64 bits. Unfortunately 32 bits requires __ARCH_WANT_SYS_IPC and this was inadvertently dropped. Reported-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Link: http://lkml.kernel.org/r/CALLzPKbeXN5gdngo8uYYU8mAow=XhrwBFBhKfG811f37BubQOg@mail.gmail.com
| | | | * Merge remote-tracking branch 'linus/master' into x86/urgentH. Peter Anvin2012-01-19
| | | | |\
| | | | * | x86, tsc: Fix SMI induced variation in quick_pit_calibrate()Linus Torvalds2012-01-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pit_expect_msb() returns success wrongly in the below SMI scenario: a. pit_verify_msb() has not yet seen the MSB transition. b. we are close to the MSB transition though and got a SMI immediately after returning from pit_verify_msb() which didn't see the MSB transition. PIT MSB transition has happened somewhere during SMI execution. c. returned from SMI and we noted down the 'tsc', saw the pit MSB change now and exited the loop to calculate 'deltatsc'. Instead of noting the TSC at the MSB transition, we are way off because of the SMI. And as the SMI happened between the pit_verify_msb() and before the 'tsc' is recorded in the for loop, 'delattsc' (d1/d2 in quick_pit_calibrate()) will be small and quick_pit_calibrate() will not notice this error. Depending on whether SMI disturbance happens while computing d1 or d2, we will see the TSC calibrated value smaller or bigger than the expected value. As a result, in a cluster we were seeing a variation of approximately +/- 20MHz in the calibrated values, resulting in NTP failures. [ As far as the SMI source is concerned, this is a periodic SMI that gets disabled after ACPI is enabled by the OS. But the TSC calibration happens before the ACPI is enabled. ] To address this, change pit_expect_msb() so that - the 'tsc' is the TSC in between the two reads that read the MSB change from the PIT (same as before) - the 'delta' is the difference in TSC from *before* the MSB changed to *after* the MSB changed. Now the delta is twice as big as before (it covers four PIT accesses, roughly 4us) and quick_pit_calibrate() will loop a bit longer to get the calibrated value with in the 500ppm precision. As the delta (d1/d2) covers four PIT accesses, actual calibrated result might be closer to 250ppm precision. As the loop now takes longer to stabilize, double MAX_QUICK_PIT_MS to 50. SMI disturbance will showup as much larger delta's and the loop will take longer than usual for the result to be with in the accepted precision. Or will fallback to slow PIT calibration if it takes more than 50msec. Also while we are at this, remove the calibration correction that aims to get the result to the middle of the error bars. We really don't know which direction to correct into, so remove it. Reported-and-tested-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/1326843337.5291.4.camel@sbsiddha-mobl2 Signed-off-by: H. Peter Anvin <hpa@zytor.com>
| | | | * | x86, opcode: ANDN and Group 17 in x86-opcode-map.txtUlrich Drepper2012-01-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Intel documentation at http://software.intel.com/file/36945 shows the ANDN opcode and Group 17 with encoding f2 and f3 encoding respectively. The current version of x86-opcode-map.txt shows them with f3 and f4. Unless someone can point to documentation which shows the currently used encoding the following patch be applied. Signed-off-by: Ulrich Drepper <drepper@gmail.com> Link: http://lkml.kernel.org/r/CAOPLpQdq5SuVo9=023CYhbFLAX9rONyjmYq7jJkqc5xwctW5eA@mail.gmail.com Signed-off-by: H. Peter Anvin <hpa@zytor.com>
| | | | * | x86/kconfig: Move the ZONE_DMA entry under a menuRandy Dunlap2012-01-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the ZONE_DMA kconfig symbol under a menu item instead of having it listed before everything else in "make {xconfig | gconfig | nconfig | menuconfig}". This drops the first line of the top-level kernel config menu (in 3.2) below and moves it under "Processor type and features". [*] DMA memory allocation support General setup ---> [*] Enable loadable module support ---> [*] Enable the block layer ---> Processor type and features ---> Power management and ACPI options ---> Bus options (PCI etc.) ---> Executable file formats / Emulations ---> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: David Rientjes <rientjes@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-mm@kvack.org <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/4F14811E.6090107@xenotime.net Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: David Rientjes <rientjes@google.com>
| | | | * | x86/UV2: Add accounting for BAU strong nacksCliff Wickman2012-01-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds separate accounting of UV2 message "strong nack's" in the BAU statistics. Signed-off-by: Cliff Wickman <cpw@sgi.com> Link: http://lkml.kernel.org/r/20120116212238.GF5767@sgi.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
| | | | * | x86/UV2: Ack BAU interrupt earlierCliff Wickman2012-01-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch moves the ack of the BAU interrupt to the beginning of the interrupt handler so that there is less possibility of a lost interrupt and slower response to a shootdown message. Signed-off-by: Cliff Wickman <cpw@sgi.com> Link: http://lkml.kernel.org/r/20120116212146.GE5767@sgi.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
| | | | * | x86/UV2: Remove stale no-resources test for UV2 BAUCliff Wickman2012-01-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes an unnecessary test for a no-destination-resources-available condition that looks like a destination timeout in UV1, but is separately distinguishable in UV2. Signed-off-by: Cliff Wickman <cpw@sgi.com> Link: http://lkml.kernel.org/r/20120116212050.GD5767@sgi.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
| | | | * | x86/UV2: Work around BAU bugCliff Wickman2012-01-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements a workaround for a UV2 hardware bug. The bug is a non-atomic update of a memory-mapped register. When hardware message delivery and software message acknowledge occur simultaneously the pending message acknowledge for the arriving message may be lost. This causes the sender's message status to stay busy. Part of the workaround is to not acknowledge a completed message until it is verified that no other message is actually using the resource that is mistakenly recorded in the completed message. Part of the workaround is to test for long elapsed time in such a busy condition, then handle it by using a spare sending descriptor. The stay-busy condition is eventually timed out by hardware, and then the original sending descriptor can be re-used. Most of that logic change is in keeping track of the current descriptor and the state of the spares. The occurrences of the workaround are added to the BAU statistics. Signed-off-by: Cliff Wickman <cpw@sgi.com> Link: http://lkml.kernel.org/r/20120116211947.GC5767@sgi.com Cc: <stable@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| | | | * | x86/UV2: Fix BAU destination timeout initializationCliff Wickman2012-01-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the call to enable_timeouts() forward so that BAU_MISC_CONTROL is initialized before using it in calculate_destination_timeout(). Fix the calculation of a BAU destination timeout for UV2 (in calculate_destination_timeout()). Signed-off-by: Cliff Wickman <cpw@sgi.com> Link: http://lkml.kernel.org/r/20120116211848.GB5767@sgi.com Cc: <stable@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| | | | * | x86/UV2: Fix new UV2 hardware by using native UV2 broadcast modeCliff Wickman2012-01-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update the use of the Broadcast Assist Unit on SGI Altix UV2 to the use of native UV2 mode on new hardware (not the legacy mode). UV2 native mode has a different format for a broadcast message. We also need quick differentiaton between UV1 and UV2. Signed-off-by: Cliff Wickman <cpw@sgi.com> Link: http://lkml.kernel.org/r/20120116211750.GA5767@sgi.com Cc: <stable@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.2 (git 2.25.0) at 2025-08-13 22:15:47 -0400