aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
* cpmac: fallback to switch mode if no PHY chip foundFlorian Fainelli2010-03-07
| | | | | | | | | | If we were unable to detect a PHY on any of the MDIO bus id we tried instead of bailing out with -ENODEV, assume the MAC is connected to a switch and use MDIO bus 0. This unbreaks quite a lot of devices out there whose switch cannot be detected. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* cpmac: fix the receiving of 802.1q framesFlorian Fainelli2010-03-07
| | | | | | | | | | Despite what the comment above CPMAC_SKB_SIZE says, the hardware also needs to account for the FCS length in a received frame. This patch fix the receiving of 802.1q frames which have 4 more bytes. While at it unhardcode the definition and use the one from if_vlan.h. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* MAINTAINER: Correct CAN Maintainer responsibilities and pathsOliver Hartkopp2010-03-07
| | | | | | | | | Update the CAN Maintainer responsibilities and add source paths. Additional the SocketCAN core ML is not subscribers-only anymore. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* another pegasus usb net devicePetko Manolov2010-03-07
| | | | | | | | | This one removes trailing whitespace in pegasus.h and more importantly adds new Pegasus compatible device. Signed-off-by: Julian Brown <julian@codesourcery.com> Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* irda-usb: add error handling and fix leakDan Carpenter2010-03-07
| | | | | | | If the call to kcalloc() fails then we should return -ENOMEM. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sock.c: potential null dereferenceDan Carpenter2010-03-07
| | | | | | | | We test that "prot->rsk_prot" is non-null right before we dereference it on this line. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ems_usb: cleanup: remove uneeded checkDan Carpenter2010-03-07
| | | | | | | | | | | "skb" is alway non-null here, but even if it were null the check isn't needed because dev_kfree_skb() can handle it. This eliminates a smatch warning about dereferencing a variable before checking that it is non-null. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: cleanup: remove unneed checkDan Carpenter2010-03-07
| | | | | | | | | We dereference "port" on the lines immediately before and immediately after the test so port should hopefully never be null here. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* fix a race in ks8695_pollFigo.zhang2010-03-07
| | | | | | | | fix a race at the end of NAPI processing in ks8695_poll() function. Signed-off-by:Figo.zhang <figo1802@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* s2io: Fixing debug messageBreno Leitao2010-03-05
| | | | | | | | | | | | | | Currently s2io is dumping debug messages using the interface name before it was allocated, showing a message like the following: s2io: eth%d: Ring Mem PHY: 0x7ef80000 s2io: s2io_reset: Resetting XFrame card eth%d This patch just fixes it, printing the pci bus information for the card instead of the interface name. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000e: fix packet corruption and tx hang during NFSv2Jesse Brandeburg2010-03-05
| | | | | | | | | | | | | | when receiving a particular type of NFS v2 UDP traffic, the hardware could DMA some bad data and then hang, possibly corrupting memory. Disable the NFS parsing in this hardware, verified to fix the bug. Originally reported and reproduced by RedHat's Neil Horman CC: nhorman@tuxdriver.com Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* typhoon: fix incorrect use of smp_wmb()David Dillow2010-03-05
| | | | | | | | | The typhoon driver was incorrectly using smp_wmb() to order memory accesses against IO to the NIC in a few instances. Use wmb() instead, which is required to actually order between memory types. Signed-off-by: David Dillow <dave@thedillows.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* ethtool: Add direct access to ops->get_sset_countJeff Garzik2010-03-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On 03/04/2010 09:26 AM, Ben Hutchings wrote: > On Thu, 2010-03-04 at 00:51 -0800, Jeff Kirsher wrote: >> From: Jeff Garzik<jgarzik@redhat.com> >> >> This patch is an alternative approach for accessing string >> counts, vs. the drvinfo indirect approach. This way the drvinfo >> space doesn't run out, and we don't break ABI later. > [...] >> --- a/net/core/ethtool.c >> +++ b/net/core/ethtool.c >> @@ -214,6 +214,10 @@ static noinline int ethtool_get_drvinfo(struct net_device *dev, void __user *use >> info.cmd = ETHTOOL_GDRVINFO; >> ops->get_drvinfo(dev,&info); >> >> + /* >> + * this method of obtaining string set info is deprecated; >> + * consider using ETHTOOL_GSSET_INFO instead >> + */ > > This comment belongs on the interface (ethtool.h) not the > implementation. Debatable -- the current comment is located at the callsite of ops->get_sset_count(), which is where an implementor might think to add a new call. Not all the numeric fields in ethtool_drvinfo are obtained from ->get_sset_count(). Hence the "some" in the attached patch to include/linux/ethtool.h, addressing your comment. > [...] >> +static noinline int ethtool_get_sset_info(struct net_device *dev, >> + void __user *useraddr) >> +{ > [...] >> + /* calculate size of return buffer */ >> + for (i = 0; i< 64; i++) >> + if (sset_mask& (1ULL<< i)) >> + n_bits++; > [...] > > We have a function for this: > > n_bits = hweight64(sset_mask); Agreed. I've attached a follow-up patch, which should enable my/Jeff's kernel patch to be applied, followed by this one. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ethtool: Add direct access to ops->get_sset_countJeff Garzik2010-03-05
| | | | | | | | | | | This patch is an alternative approach for accessing string counts, vs. the drvinfo indirect approach. This way the drvinfo space doesn't run out, and we don't break ABI later. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: smc91x: Support Qualcomm MSM development boards.David Brown2010-03-05
| | | | | | | Signed-off-by: David Brown <davidb@quicinc.com> Signed-off-by: Daniel Walker <dwalker@codeaurora.org> Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: backlog functions renameZhu Yi2010-03-05
| | | | | | | | | sk_add_backlog -> __sk_add_backlog sk_add_backlog_limited -> sk_add_backlog Signed-off-by: Zhu Yi <yi.zhu@intel.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* x25: use limited socket backlogZhu Yi2010-03-05
| | | | | | | | | Make x25 adapt to the limited socket backlog change. Cc: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: use limited socket backlogZhu Yi2010-03-05
| | | | | | | | | | | Make tipc adapt to the limited socket backlog change. Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sctp: use limited socket backlogZhu Yi2010-03-05
| | | | | | | | | Make sctp adapt to the limited socket backlog change. Cc: Vlad Yasevich <vladislav.yasevich@hp.com> Cc: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* llc: use limited socket backlogZhu Yi2010-03-05
| | | | | | | | | | Make llc adapt to the limited socket backlog change. Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* udp: use limited socket backlogZhu Yi2010-03-05
| | | | | | | | | | | | Make udp adapt to the limited socket backlog change. Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: "Pekka Savola (ipv6)" <pekkas@netcore.fi> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tcp: use limited socket backlogZhu Yi2010-03-05
| | | | | | | | | | | | Make tcp adapt to the limited socket backlog change. Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: "Pekka Savola (ipv6)" <pekkas@netcore.fi> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: add limit for socket backlogZhu Yi2010-03-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We got system OOM while running some UDP netperf testing on the loopback device. The case is multiple senders sent stream UDP packets to a single receiver via loopback on local host. Of course, the receiver is not able to handle all the packets in time. But we surprisingly found that these packets were not discarded due to the receiver's sk->sk_rcvbuf limit. Instead, they are kept queuing to sk->sk_backlog and finally ate up all the memory. We believe this is a secure hole that a none privileged user can crash the system. The root cause for this problem is, when the receiver is doing __release_sock() (i.e. after userspace recv, kernel udp_recvmsg -> skb_free_datagram_locked -> release_sock), it moves skbs from backlog to sk_receive_queue with the softirq enabled. In the above case, multiple busy senders will almost make it an endless loop. The skbs in the backlog end up eat all the system memory. The issue is not only for UDP. Any protocols using socket backlog is potentially affected. The patch adds limit for socket backlog so that the backlog size cannot be expanded endlessly. Reported-by: Alex Shi <alex.shi@intel.com> Cc: David Miller <davem@davemloft.net> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru Cc: "Pekka Savola (ipv6)" <pekkas@netcore.fi> Cc: Patrick McHardy <kaber@trash.net> Cc: Vlad Yasevich <vladislav.yasevich@hp.com> Cc: Sridhar Samudrala <sri@us.ibm.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Allan Stephens <allan.stephens@windriver.com> Cc: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* rndis_wlan: correct multicast_list handling V3Jiri Pirko2010-03-04
| | | | | | | | | | | My previous patch (655ffee284dfcf9a24ac0343f3e5ee6db85b85c5) added locking in a bad way. Because rndis_set_oid can sleep, there is need to prepare multicast addresses into local buffer under netif_addr_lock first, then call rndis_set_oid outside. This caused reorganizing of the whole function. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reported-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
* MAINTAINERS: Add netdev to bridge entry.David S. Miller2010-03-04
| | | | | | Noticed by Ingo Molnar. Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb3: fix hot plug removal crashDivy Le Ray2010-03-04
| | | | | | | | queue restart tasklets need to be stopped after napi handlers are stopped since the latter can restart them. So stop them after stopping napi. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* gianfar: Fix TX ring processing on SMP machinesAnton Vorontsov2010-03-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Starting with commit a3bc1f11e9b867a4f49505 ("gianfar: Revive SKB recycling") gianfar driver sooner or later stops transmitting any packets on SMP machines. start_xmit() prepares new skb for transmitting, generally it does three things: 1. sets up all BDs (marks them ready to send), except the first one. 2. stores skb into tx_queue->tx_skbuff so that clean_tx_ring() would cleanup it later. 3. sets up the first BD, i.e. marks it ready. Here is what clean_tx_ring() does: 1. reads skbs from tx_queue->tx_skbuff 2. checks if the *last* BD is ready. If it's still ready [to send] then it it isn't transmitted, so clean_tx_ring() returns. Otherwise it actually cleanups BDs. All is OK. Now, if there is just one BD, code flow: - start_xmit(): stores skb into tx_skbuff. Note that the first BD (which is also the last one) isn't marked as ready, yet. - clean_tx_ring(): sees that skb is not null, *and* its lstatus says that it is NOT ready (like if BD was sent), so it cleans it up (bad!) - start_xmit(): marks BD as ready [to send], but it's too late. We can fix this simply by reordering lstatus/tx_skbuff writes. Reported-by: Martyn Welch <martyn.welch@ge.com> Bisected-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com> Tested-by: Martyn Welch <martyn.welch@ge.com> Cc: Sandeep Gopalpet <Sandeep.Kumar@freescale.com> Cc: Stable <stable@vger.kernel.org> [2.6.33] Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: use correct barrier between cacheable and non-cacheable memoryDavid Dillow2010-03-04
| | | | | | | | | | | | r8169 needs certain writes to be visible to other CPUs or the NIC before touching the hardware, but was using smp_wmb() which is only required to order cacheable memory access. Switch to wmb() which is required to order both cacheable and non-cacheable memory. Noticed by Catalin Marinas and Paul Mackerras. Signed-off-by: David Dillow <dave@thedillows.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: Fix oops on send prior to entering networked mode (v3)Neil Horman2010-03-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix TIPC to disallow sending to remote addresses prior to entering NET_MODE user programs can oops the kernel by sending datagrams via AF_TIPC prior to entering networked mode. The following backtrace has been observed: ID: 13459 TASK: ffff810014640040 CPU: 0 COMMAND: "tipc-client" [exception RIP: tipc_node_select_next_hop+90] RIP: ffffffff8869d3c3 RSP: ffff81002d9a5ab8 RFLAGS: 00010202 RAX: 0000000000000001 RBX: 0000000000000001 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000001001001 RBP: 0000000001001001 R8: 0074736575716552 R9: 0000000000000000 R10: ffff81003fbd0680 R11: 00000000000000c8 R12: 0000000000000008 R13: 0000000000000001 R14: 0000000000000001 R15: ffff810015c6ca00 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 RIP: 0000003cbd8d49a3 RSP: 00007fffc84e0be8 RFLAGS: 00010206 RAX: 000000000000002c RBX: ffffffff8005d116 RCX: 0000000000000000 RDX: 0000000000000008 RSI: 00007fffc84e0c00 RDI: 0000000000000003 RBP: 0000000000000000 R8: 00007fffc84e0c10 R9: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fffc84e0d10 R14: 0000000000000000 R15: 00007fffc84e0c30 ORIG_RAX: 000000000000002c CS: 0033 SS: 002b What happens is that, when the tipc module in inserted it enters a standalone node mode in which communication to its own address is allowed <0.0.0> but not to other addresses, since the appropriate data structures have not been allocated yet (specifically the tipc_net pointer). There is nothing stopping a client from trying to send such a message however, and if that happens, we attempt to dereference tipc_net.zones while the pointer is still NULL, and explode. The fix is pretty straightforward. Since these oopses all arise from the dereference of global pointers prior to their assignment to allocated values, and since these allocations are small (about 2k total), lets convert these pointers to static arrays of the appropriate size. All the accesses to these bits consider 0/NULL to be a non match when searching, so all the lookups still work properly, and there is no longer a chance of a bad dererence anywhere. As a bonus, this lets us eliminate the setup/teardown routines for those pointers, and elimnates the need to preform any locking around them to prevent access while their being allocated/freed. I've updated the tipc_net structure to behave this way to fix the exact reported problem, and also fixed up the tipc_bearers and media_list arrays to fix an obvious simmilar problem that arises from issuing tipc-config commands to manipulate bearers/links prior to entering networked mode I've tested this for a few hours by running the sanity tests and stress test with the tipcutils suite, and nothing has fallen over. There have been a few lockdep warnings, but those were there before, and can be addressed later, as they didn't actually result in any deadlock. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Allan Stephens <allan.stephens@windriver.com> CC: David S. Miller <davem@davemloft.net> CC: tipc-discussion@lists.sourceforge.net bearer.c | 37 ++++++------------------------------- bearer.h | 2 +- net.c | 25 ++++--------------------- 3 files changed, 11 insertions(+), 53 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
* gre: fix hard header destination address checkingTimo Teräs2010-03-04
| | | | | | | | | | | | | | | ipgre_header() can be called with zero daddr when the gre device is configured as multipoint tunnel and still has the NOARP flag set (which is typically cleared by the userspace arp daemon). If the NOARP packets are not dropped, ipgre_tunnel_xmit() will take rt->rt_gateway (= NBMA IP) and use that for route look up (and may lead to bogus xfrm acquires). The multicast address check is removed as sending to multicast group should be ok. In fact, if gre device has a multicast address as destination ipgre_header is always called with multicast address. Signed-off-by: Timo Teras <timo.teras@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: add scheduler sync hint to tcp_prequeue().Mike Galbraith2010-03-04
| | | | | | | Decreases the odds wakee will suffer from frequent cache misses. Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* IPv6: fix race between cleanup and add/delete addressstephen hemminger2010-03-04
| | | | | | | | | | | | This solves a potential race problem during the cleanup process. The issue is that addrconf_ifdown() needs to traverse address list, but then drop lock to call the notifier. The version in -next could get confused if add/delete happened during this window. Original code (2.6.32 and earlier) was okay because all addresses were always deleted. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* IPv6: addrconf notify when address is unavailablestephen hemminger2010-03-04
| | | | | | | | | | | | | | | | | My recent change in net-next to retain permanent addresses caused regression. Device refcount would not go to zero when device was unregistered because left over anycast reference would hold ipv6 dev reference which would hold device references... The correct procedure is to call notify chain when address is no longer available for use. When interface comes back DAD timer will notify back that address is available. Also, link local addresses should be purged when interface is brought down. The address might be changed. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* IPv6: addrconf timer racestephen hemminger2010-03-04
| | | | | | | | | The Router Solicitation timer races with device state changes because it doesn't lock the device. Use local variable to avoid one repeated dereference. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* IPv6: addrconf dad timer unnecessary bh_disablestephen hemminger2010-03-04
| | | | | | | | | Timer code runs in bottom half, so there is no need for using _bh form of locking. Also check if device is not ready to avoid race with address that is no longer active. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2010-03-04
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
| * rt2x00: Export rt2x00soc_probe from rt2x00socHelmut Schaa2010-03-03
| | | | | | | | | | | | | | | | | | | | | | Export rt2x00soc_probe from rt2x00soc as it is used in rt2800pci. Otherwise loading rt2800pci gives "rt2800pci: Unknown symbol rt2x00soc_probe". Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mac80211: Fix HT rate control configurationSujith2010-03-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Handling HT configuration changes involved setting the channel with the new HT parameters and then issuing a rate_update() notification to the driver. This behavior changed after the off-channel changes. Now, the channel is not updated with the new HT params in enable_ht() - instead, it is now done when the scan work terminates. This results in the driver depending on stale information, defaulting to non-HT mode always. Fix this by passing the new channel type to the driver. Cc: stable@kernel.org Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: load firmware asynchronously before mac80211 registrationJohannes Berg2010-03-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At the wireless summit in Portland we discussed a way of loading firmware asynchronously from ->probe() before registration to mac80211, in order to register with the wireless subsystems with complete information in cases where firmware is required to know parameters. This is not yet the case in iwlwifi, but for some new features we're working on it will be the case since those will only be supported by new firmware images. Hence, to start with, convert iwlwifi to load firmware asynchronously from probe, unbinding the device when firmware loading fails, and only registering with the wireless subsystems after firmware has been loaded successfully. Future patches will hook into this to register the new firmware capabilities, depending on the firmware API version. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ar9170: load firmware asynchronouslyJohannes Berg2010-03-02
| | | | | | | | | | | | | | | | | | | | | | This converts ar9170 to load firmware asynchronously out of ->probe() and only register with mac80211 when all firmware has been loaded successfully. If, on the other hand, any firmware fails to load, it will now unbind from the device. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * rt2x00: fix rt2800pci compilation with SoCHelmut Schaa2010-03-02
| | | | | | | | | | | | | | | | | | | | Compiling rt2800pci with CONFIG_RT2800PCI_SOC fails with "... rt2880pci.c: error: incompatible type for argument 2 of 'rt2x00soc_probe'". Fix this by using &rt2800pci_ops instead of rt2800pci_ops. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * rt2x00: Add USB ID for CEIVA adapter to rt73usbBryan Polk2010-03-02
| | | | | | | | | | | | | | | | | | This adds support for CEIVA USB wireless adapters to the rt73usb driver. Signed-off-by: Bryan Polk <sainth@eidolons.org> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mac80211: Fix reassociation processing (within ESS roaming)Jouni Malinen2010-03-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit e1dd33f60ced091114e4aacf141e0d03b88d3e13 changed cfg80211 to allow association commands while in associated state to enable support for roaming within an ESS. However, this was not enough to resolve all cases with mac80211 which needs some additional handling of the reassociation case to clear internal state with the BSS that was in use previously. This patch makes ieee80211_mgd_assoc() accept a valid reassociation command and clean the association state with the previous BSS. This fixes roaming between BSSes in an ESS when using wpa_supplicant with -Dnl80211. Signed-off-by: Jouni Malinen <j@w1.fi> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: fix lockdep warning when unloading moduleMing Lei2010-03-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since txq->axq_lock may be hold in softirq context, it must be acquired with spin_lock_bh() instead of spin_lock() if softieq is enabled. The patch fixes the lockdep warning below when unloading ath9k modules. ================================= [ INFO: inconsistent lock state ] 2.6.33-wl #12 --------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. rmmod/3642 [HC0[0]:SC0[0]:HE1:SE1] takes: (&(&txq->axq_lock)->rlock){+.?...}, at: [<ffffffffa03568c3>] ath_tx_node_cleanup+0x62/0x180 [ath9k] {IN-SOFTIRQ-W} state was registered at: [<ffffffff8107577d>] __lock_acquire+0x2f6/0xd35 [<ffffffff81076289>] lock_acquire+0xcd/0xf1 [<ffffffff813a7486>] _raw_spin_lock_bh+0x3b/0x6e [<ffffffffa0356b49>] spin_lock_bh+0xe/0x10 [ath9k] [<ffffffffa0358ec7>] ath_tx_tasklet+0xcd/0x391 [ath9k] [<ffffffffa0354f5f>] ath9k_tasklet+0x70/0xc8 [ath9k] [<ffffffff8104e601>] tasklet_action+0x8c/0xf4 [<ffffffff8104f459>] __do_softirq+0xf8/0x1cd [<ffffffff8100ab1c>] call_softirq+0x1c/0x30 [<ffffffff8100c2cf>] do_softirq+0x4b/0xa3 [<ffffffff8104f045>] irq_exit+0x4a/0x8c [<ffffffff813acccc>] do_IRQ+0xac/0xc3 [<ffffffff813a7d53>] ret_from_intr+0x0/0x16 [<ffffffff81302d52>] cpuidle_idle_call+0x9e/0xf8 [<ffffffff81008be7>] cpu_idle+0x62/0x9d [<ffffffff81391c1a>] rest_init+0x7e/0x80 [<ffffffff818bbd38>] start_kernel+0x3e8/0x3f3 [<ffffffff818bb2bc>] x86_64_start_reservations+0xa7/0xab [<ffffffff818bb3b8>] x86_64_start_kernel+0xf8/0x107 irq event stamp: 42037 hardirqs last enabled at (42037): [<ffffffff813a7b21>] _raw_spin_unlock_irqrestore+0x47/0x56 hardirqs last disabled at (42036): [<ffffffff813a72f4>] _raw_spin_lock_irqsave+0x2b/0x88 softirqs last enabled at (42000): [<ffffffffa0353ea6>] spin_unlock_bh+0xe/0x10 [ath9k] softirqs last disabled at (41998): [<ffffffff813a7463>] _raw_spin_lock_bh+0x18/0x6e other info that might help us debug this: 4 locks held by rmmod/3642: #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff8132c10d>] rtnl_lock+0x17/0x19 #1: (&wdev->mtx){+.+.+.}, at: [<ffffffffa01e53f2>] cfg80211_netdev_notifier_call+0x28d/0x46d [cfg80211] #2: (&ifmgd->mtx){+.+.+.}, at: [<ffffffffa0260834>] ieee80211_mgd_deauth+0x3f/0x17e [mac80211] #3: (&local->sta_mtx){+.+.+.}, at: [<ffffffffa025a381>] sta_info_destroy_addr+0x2b/0x5e [mac80211] stack backtrace: Pid: 3642, comm: rmmod Not tainted 2.6.33-wl #12 Call Trace: [<ffffffff81074469>] valid_state+0x178/0x18b [<ffffffff81014f94>] ? save_stack_trace+0x2f/0x4c [<ffffffff81074e08>] ? check_usage_backwards+0x0/0x88 [<ffffffff8107458f>] mark_lock+0x113/0x230 [<ffffffff810757f1>] __lock_acquire+0x36a/0xd35 [<ffffffff8101018d>] ? native_sched_clock+0x2d/0x5f [<ffffffffa03568c3>] ? ath_tx_node_cleanup+0x62/0x180 [ath9k] [<ffffffff81076289>] lock_acquire+0xcd/0xf1 [<ffffffffa03568c3>] ? ath_tx_node_cleanup+0x62/0x180 [ath9k] [<ffffffff810732eb>] ? trace_hardirqs_off+0xd/0xf [<ffffffff813a7193>] _raw_spin_lock+0x36/0x69 [<ffffffffa03568c3>] ? ath_tx_node_cleanup+0x62/0x180 [ath9k] [<ffffffffa03568c3>] ath_tx_node_cleanup+0x62/0x180 [ath9k] [<ffffffff810749ed>] ? trace_hardirqs_on+0xd/0xf [<ffffffffa0353950>] ath9k_sta_remove+0x22/0x26 [ath9k] [<ffffffffa025a08f>] __sta_info_destroy+0x1ad/0x38c [mac80211] [<ffffffffa025a394>] sta_info_destroy_addr+0x3e/0x5e [mac80211] [<ffffffffa02605d6>] ieee80211_set_disassoc+0x175/0x180 [mac80211] [<ffffffffa026084d>] ieee80211_mgd_deauth+0x58/0x17e [mac80211] [<ffffffff813a60c1>] ? __mutex_lock_common+0x37f/0x3a4 [<ffffffffa01e53f2>] ? cfg80211_netdev_notifier_call+0x28d/0x46d [cfg80211] [<ffffffffa026786e>] ieee80211_deauth+0x1e/0x20 [mac80211] [<ffffffffa01f47f9>] __cfg80211_mlme_deauth+0x130/0x13f [cfg80211] [<ffffffffa01e53f2>] ? cfg80211_netdev_notifier_call+0x28d/0x46d [cfg80211] [<ffffffff810732eb>] ? trace_hardirqs_off+0xd/0xf [<ffffffffa01f7eee>] __cfg80211_disconnect+0x111/0x189 [cfg80211] [<ffffffffa01e5433>] cfg80211_netdev_notifier_call+0x2ce/0x46d [cfg80211] [<ffffffff813aa9ea>] notifier_call_chain+0x37/0x63 [<ffffffff81068c98>] raw_notifier_call_chain+0x14/0x16 [<ffffffff81322e97>] call_netdevice_notifiers+0x1b/0x1d [<ffffffff8132386d>] dev_close+0x6a/0xa6 [<ffffffff8132395f>] rollback_registered_many+0xb6/0x2f4 [<ffffffff81323bb8>] unregister_netdevice_many+0x1b/0x66 [<ffffffffa026494f>] ieee80211_remove_interfaces+0xc5/0xd0 [mac80211] [<ffffffffa02580a2>] ieee80211_unregister_hw+0x47/0xe8 [mac80211] [<ffffffffa035290e>] ath9k_deinit_device+0x7a/0x9b [ath9k] [<ffffffffa035bc26>] ath_pci_remove+0x38/0x76 [ath9k] [<ffffffff8120940a>] pci_device_remove+0x2d/0x51 [<ffffffff8129d797>] __device_release_driver+0x7b/0xd1 [<ffffffff8129d885>] driver_detach+0x98/0xbe [<ffffffff8129ca7a>] bus_remove_driver+0x94/0xb7 [<ffffffff8129ddd6>] driver_unregister+0x6c/0x74 [<ffffffff812096d2>] pci_unregister_driver+0x46/0xad [<ffffffffa035bae1>] ath_pci_exit+0x15/0x17 [ath9k] [<ffffffffa035e1a2>] ath9k_exit+0xe/0x2f [ath9k] [<ffffffff8108050a>] sys_delete_module+0x1c7/0x236 [<ffffffff813a7df5>] ? retint_swapgs+0x13/0x1b [<ffffffff810749b5>] ? trace_hardirqs_on_caller+0x119/0x144 [<ffffffff8109b9f6>] ? audit_syscall_entry+0x11e/0x14a [<ffffffff81009bb2>] system_call_fastpath+0x16/0x1b wlan1: deauthenticating from 00:23:cd:e1:f9:b2 by local choice (reason=3) PM: Removing info for No Bus:wlan1 cfg80211: Calling CRDA to update world regulatory domain PM: Removing info for No Bus:rfkill2 PM: Removing info for No Bus:phy1 ath9k 0000:16:00.0: PCI INT A disabled Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * zd1211rw: fix potential array underflowDan Carpenter2010-03-02
| | | | | | | | | | | | | | | | | | | | The first chunk fixes a debugging assert to print a warning about array underflows. The second chunk corrects a potential array underflow. I also removed an assert in the second chunk because it can no longer happen. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Benoit Papillault <benoit.papillault@free.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * rfkill: Add support for KEY_RFKILLMatthew Garrett2010-03-02
| | | | | | | | | | | | | | | | | | | | | | Add support for handling KEY_RFKILL in the rfkill input module. This simply toggles the state of all rfkill devices. The comment in rfkill.h is also updated to reflect that RFKILL_TYPE_ALL may be used inside the kernel. Signed-off-by: Matthew Garrett <mjg@redhat.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * airo: return from set_wep_key() when key length is zeroStanislaw Gruszka2010-03-02
| | | | | | | | | | | | | | | | Even if keylen == 0 is a bug and should not really happen, better avoid possibility of passing bad value to firmware. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | bridge: depends on INETRandy Dunlap2010-03-03
| | | | | | | | | | | | | | | | | | | | | | | | | | br_multicast calls ip_send_check(), so it should depend on INET. built-in: br_multicast.c:(.text+0x88cf4): undefined reference to `ip_send_check' or modular: ERROR: "ip_send_check" [net/bridge/bridge.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnx2x: Removed FW 5.2.7Vladislav Zolotarov2010-03-03
| | | | | | | | | | | | | | | | Removed FW 5.2.7. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | davinci_emac: off by oneDan Carpenter2010-03-03
| | | | | | | | | | | | | | | | | | This off by one error was found by smatch. drivers/net/davinci_emac.c +2390 emac_dev_open(13) error: buffer overflow 'priv->mac_addr' 6 <= 6 Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-13 21:48:43 -0500