aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
* powerpc/85xx: update sbc8548 flash information to match recent u-bootPaul Gortmaker2013-02-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The original memory map for the sbc8548 had the 64MB SODIMM flash device misaligned by 8MB to allow a window of address space for the soldered on 8MB device -- i.e. start end CS<n> width Desc. ---------------------------------------------------------- fb80_0000 ff7f_ffff CS6 32 SODIMM flash (64MB) ff80_0000 ffff_ffff CS0 8 Boot flash (8MB) However, if we want to change the configuration so that it boots off the 64MB flash, it is in turn then aligned with a 64MB boundary, starting at fc00_0000 (and the 8MB @ fb80_0000 -> fbff_ffff). This makes for complicated updates, since what is the beginning of the physical device is 8MB into its address space in the default configuration shown above. This issue was fixed as of u-boot commit 3fd673cf363bc86ed42eff713d4 ("sbc8548: relocate 64MB user flash to sane boundary") -- in which the SODIMM was mapped to ec00_0000 (natively aligned under efff_ffff) and so when JP12/SW2.8 are switched, it will be a a simple 0xec --> 0xfc mapping between the two instances. Here we make the associated changes in the localbus flash memory map in the dts file: indicating the 64MB device starts at ec00_0000 and that the tail end of the 64MB device (last 2 sectors) can contain a bootloader image. The partitions for both flash devices get a clean-up; there were non-meaningful assignments in there that probably originated from the MPC8548CDS on which the file was based on. Now there is just the categorization of free space and bootloader images. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: split sbc8548 dts file into pre and post chunksPaul Gortmaker2013-02-13
| | | | | | | | | | | | | | | | | | | | | Updates to u-boot allow this board to boot off of either the 8MB soldered on flash, or the 64MB SODIMM flash. This is achieved by changing JP12 and SW2.8 which in turn swaps which flash device appears on /CS0 and /CS6 respectively. Since the flash devices are not the same size, this also changes the MTD memory map layout on the local bus. Here we split the common chunks out into a pre and post include, so they can be reused by an upcoming "alternative boot" dts file; leaving only the local bus chunk behind. No content changes are made at this point - it is just purely the move to using include files. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: use for_each_compatible_node() macroWei Yongjun2013-02-13
| | | | | | | | Use for_each_compatible_node() macro instead of open coding it. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/fsl: msi: sparse fixesKim Phillips2013-02-12
| | | | | | | | | | arch/powerpc/sysdev/fsl_msi.c:31:1: warning: symbol 'msi_head' was not declared. Should it be static? arch/powerpc/sysdev/fsl_msi.c:138:40: warning: incorrect type in argument 1 (different base types) arch/powerpc/sysdev/fsl_msi.c:138:40: expected restricted __be64 const [usertype] *p arch/powerpc/sysdev/fsl_msi.c:138:40: got unsigned long long const [usertype] *[assigned] reg Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/fsl: ifc: sparse fixesKim Phillips2013-02-12
| | | | | | | | | | | arch/powerpc/sysdev/fsl_ifc.c:66:38: warning: incorrect type in initializer (different base types) arch/powerpc/sysdev/fsl_ifc.c:66:38: expected restricted __be32 [usertype] cspr arch/powerpc/sysdev/fsl_ifc.c:66:38: got unsigned int arch/powerpc/sysdev/fsl_ifc.c:67:21: warning: restricted __be32 degrades to integer arch/powerpc/sysdev/fsl_ifc.c:67:39: warning: restricted __be32 degrades to integer Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/fsl: fsl_soc: sparse fixesKim Phillips2013-02-12
| | | | | | | | | arch/powerpc/sysdev/fsl_soc.c:70:67: warning: incorrect type in argument 2 (different base types) arch/powerpc/sysdev/fsl_soc.c:70:67: expected restricted __be32 const [usertype] *addr arch/powerpc/sysdev/fsl_soc.c:70:67: got unsigned int const [usertype] * Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/fsl: lbc: sparse fixesKim Phillips2013-02-12
| | | | | | | | | | | | | | | | | | | arch/powerpc/sysdev/fsl_lbc.c:77:36: warning: incorrect type in initializer (different base types) arch/powerpc/sysdev/fsl_lbc.c:77:36: expected restricted __be32 [usertype] br arch/powerpc/sysdev/fsl_lbc.c:77:36: got unsigned int arch/powerpc/sysdev/fsl_lbc.c:78:36: warning: incorrect type in initializer (different base types) arch/powerpc/sysdev/fsl_lbc.c:78:36: expected restricted __be32 [usertype] or arch/powerpc/sysdev/fsl_lbc.c:78:36: got unsigned int arch/powerpc/sysdev/fsl_lbc.c:80:21: warning: restricted __be32 degrades to integer arch/powerpc/sysdev/fsl_lbc.c:80:38: warning: restricted __be32 degrades to integer arch/powerpc/sysdev/fsl_lbc.c:111:12: warning: incorrect type in assignment (different base types) arch/powerpc/sysdev/fsl_lbc.c:111:12: expected restricted __be32 [usertype] br arch/powerpc/sysdev/fsl_lbc.c:111:12: got unsigned int arch/powerpc/sysdev/fsl_lbc.c:113:17: warning: restricted __be32 degrades to integer arch/powerpc/sysdev/fsl_lbc.c:127:17: warning: restricted __be32 degrades to integer Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc: Add support for context switching the TAR registerIan Munsie2013-02-07
| | | | | | | | | | | | This patch adds support for enabling and context switching the Target Address Register in Power8. The TAR is a new special purpose register that can be used for computed branches with the bctar[l] (branch conditional to TAR) instruction in the same manner as the count and link registers. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Matt Evans <matt@ozlabs.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* pseries/iommu: Remove DDW on kexecNishanth Aravamudan2013-02-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | pseries/iommu: remove DDW on kexec We currently insert a property in the device-tree when we successfully configure DDW for a given slot. This was meant to be an optimization to speed up kexec/kdump, so that we don't need to make the RTAS calls again to re-configured DDW in the new kernel. However, we end up tripping a plpar_tce_stuff failure on kexec/kdump because we unconditionally parse the ibm,dma-window property for the node at bus/dev setup time. This property contains the 32-bit DMA window LIOBN, which is distinct from the DDW window's. We pass that LIOBN (via iommu_table_init -> iommu_table_clear -> tce_free -> tce_freemulti_pSeriesLP) to plpar_tce_stuff, which fails because that 32-bit window is no longer present after 25ebc45b93452d0bc60271f178237123c4b26808 ("powerpc/pseries/iommu: remove default window before attempting DDW manipulation"). I believe the simplest, easiest-to-maintain fix is to just change our initcall to, rather than detecting and updating the new kernel's DDW knowledge, just remove all DDW configurations. When the drivers re-initialize, we will set everything back up as it was before. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* pseries/iommu: Restore_default_window does not use liobn parameterNishanth Aravamudan2013-02-07
| | | | | | | | The parameter is unused, and complicates a following fix. Just remove it. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: fix ics_rtas_init and start_secondary section mismatchDaniel Borkmann2013-02-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | It seems, we're fine with just annotating the two functions. Thus, this fixes the following build warnings on ppc64: WARNING: arch/powerpc/sysdev/xics/built-in.o(.text+0x1664): The function .ics_rtas_init() references the function __init .xics_register_ics(). This is often because .ics_rtas_init lacks a __init annotation or the annotation of .xics_register_ics is wrong. WARNING: arch/powerpc/sysdev/built-in.o(.text+0x6044): The function .ics_rtas_init() references the function __init .xics_register_ics(). This is often because .ics_rtas_init lacks a __init annotation or the annotation of .xics_register_ics is wrong. WARNING: arch/powerpc/kernel/built-in.o(.text+0x2db30): The function .start_secondary() references the function __cpuinit .vdso_getcpu_init(). This is often because .start_secondary lacks a __cpuinit annotation or the annotation of .vdso_getcpu_init is wrong. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* pseries/iommu: Ensure TCEs are cleared with non-huge DDWNishanth Aravamudan2013-01-28
| | | | | | | | | | | | | | | | | | | | There are now two kinds of DMA windows that might be presented by PowerVM DDW support -- huge windows (that can map all of system memory regardless of the LPAR configuration) and non-huge windows (which can't). They are implemented slightly differently in PowerVM, and thus have different characteristics. The most obvious is that slot isolate doesn't clear the TCEs/window for us with non-huge windows. Thus, when a DLPAR operation occurs on a slot using a non-huge window, TCEs are still present (the notifier chain doesn't currently remove them explicitly) and the DLPAR fails. Fix this by calling remove_ddw() first, which will unmap the DDW TCEs. Note: a corresponding change to drmgr is needed to actually successfully DLPAR, such that the device-tree update (which causes the notifier chain to fire) occurs before slot isolate. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* pseries/iommu: Fix iteration in DDW TCE clearrangeNishanth Aravamudan2013-01-28
| | | | | | | | | | tce_clearrange_multi_pSeriesLP is attempting to iterate over all TCEs in a given range. However, is it not advancing the dma_offset value passed to plpar_tce_stuff via the next value. This prevents DLPAR from completing, because TCEs are still present at slot isolation time. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Change hardware breakpoint to allow longer rangesMichael Neuling2013-01-28
| | | | | | | | | | | Change the hardware breakpoint code so that we can support wider ranged breakpoints. This means both ptrace and perf hardware breakpoints can use upto 512 byte long breakpoints when using the DAWR and only 8 byte when using the DABR. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Add length setting to set_dawrMichael Neuling2013-01-28
| | | | | | | | | | Currently we set the length field in the DAWR to 0 which defaults it to one double word (64bits) which is the same as the DABR. Change this so that we can set it to longer values as supported by the DAWR. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* perf/Power: PERF_EVENT_IOC_ENABLE does not reenable eventsukadev@linux.vnet.ibm.com2013-01-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | perf/Power: PERF_EVENT_IOC_ENABLE does not reenable event If we disable a perf event because we exceeded the specified ->event_limit, power_pmu_stop() sets the PERF_HES_STOPPED flag on the event. If the application then re-enables the event using PERF_EVENT_IOC_ENABLE ioctl, we don't ever clear this STOPPED flag. Consequently, the user space is never notified of the event. Following message has more background and test case. http://lists.eecs.utk.edu/pipermail/ptools-perfapi/2012-October/002528.html Used the following test cases to verify that this patch works on latest PAPI. $ papi.git/src/ctests/nonthread PAPI_TOT_CYC@5000000 $ papi.git/src/ctests/overflow_single_event Changelog[v2]: - [Paul Mackerras] Also clear PERF_HES_UPTODATE flag since we are restarting the event; cleanup comments and patch description. Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Avoid debug_smp_processor_id() check in SHARED_PROCESSORLi Zhong2013-01-28
| | | | | | | | | | Use local_paca directly in macro SHARED_PROCESSOR, as all processors have the same value for the field shared_proc, so we don't need care racy here. Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* uprobes/powerpc: Add dependency on single step emulationSuzuki K. Poulose2013-01-28
| | | | | | | | | | | | | | Uprobes uses emulate_step in sstep.c, but we haven't explicitly specified the dependency. On pseries HAVE_HW_BREAKPOINT protects us, but 44x has no such luxury. Consolidate other users that depend on sstep and create a new config option. Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Suzuki K. Poulose <suzuki@in.ibm.com> Cc: linuxppc-dev@ozlabs.org Cc: stable@vger.kernel.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Add support for CTS-1000 GPIO controlled system poweroffBenjamin Collins2013-01-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CTS-1000 is based on P4080. GPIO 27 is used to signal the FPGA to switch off power, and also associates IRQ 8 with front-panel button press (which we use to call orderly_poweroff()). The relevant device-tree looks like this: gpio0: gpio@130000 { compatible = "fsl,qoriq-gpio"; reg = <0x130000 0x1000>; interrupts = <55 2 0 0>; #gpio-cells = <2>; gpio-controller; /* Allows powering off the system via GPIO signal. */ gpio-halt@27 { compatible = "sgy,gpio-halt"; gpios = <&gpio0 27 0>; interrupts = <8 1 0 0>; }; }; Because the driver cannot match on sgy,gpio-halt (because the node is never processed through of_platform), it matches on fsl,qoriq-gpio and then checks child nodes for the matching sgy,gpio-halt. This also ensures that the GPIO controller is detected prior to sgy_cts1000's probe callback, since that node wont match via of_platform until the controller is registered. Also, because the GPIO handler for triggering system poweroff might sleep, the IRQ uses a workqueue to call orderly_poweroff(). As a final note, this driver may be expanded for other features specific to the CTS-1000. Signed-off-by: Ben Collins <ben.c@servergy.com> Cc: Jack Smith <jack.s@servergy.com> Cc: Vihar Rai <vihar.r@servergy.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/fsl: Remove CONFIG_IRQ_ALL_CPUS from mpc85xx/mpc86xx defconfigScott Wood2013-01-28
| | | | | | | | | While this should be harmless now that distribute_irqs obeys MPIC_SINGLE_DEST_CPU, there's no reason to enable this on mpc85xx/mpc86xx since MPIC_SINGLE_DEST_CPU will always be set. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/mpic: Make distribute_irqs obey MPIC_SINGLE_DEST_CPUScott Wood2013-01-28
| | | | | | | | | Previously we were setting an illegal configuration on mpc85xx MPICs if CONFIG_IRQ_ALL_CPUS is enabled (which for some reason it is in mpc85xx_smp_defconfig). Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/ptrace: Make #defines for all request numbers hexMichael Neuling2013-01-28
| | | | | | | | | | | We have a mix of decimal and hex here, so lets make them consistently hex. Also, strace will print them in hex if it can't decode them, so having them in hex here makes it easier to match up. No functional change. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/mm: Eliminate unneeded for_each_memblockCody P Schafer2013-01-28
| | | | | | | | | | | | The only persistent change made by this loop is calling memblock_set_node() once for each memblock, which is not useful (and has no effect) as memblock_set_node() is not called with any memblock-specific parameters. Subsistute a single memblock_set_node(). Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* Merge branch 'merge' into nextBenjamin Herrenschmidt2013-01-28
|\ | | | | | | | | Merge "merge" branch to bring in various bug fixes that are going into 3.8
| * powerpc: Max next_tb to prevent from replaying timer interruptTiejun Chen2013-01-28
| | | | | | | | | | | | | | | | | | | | | | With lazy interrupt, we always call __check_irq_replaysome with decrementers_next_tb to check if we need to replay timer interrupt. So in hotplug case we also need to set decrementers_next_tb as MAX to make sure __check_irq_replay don't replay timer interrupt when return as we expect, otherwise we'll trap here infinitely. Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * powerpc: kernel/kgdb.c: Fix memory leakageCong Ding2013-01-28
| | | | | | | | | | | | | | | | the variable backup_current_thread_info isn't freed before existing the function. Signed-off-by: Cong Ding <dinggnu@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * powerpc/book3e: Disable interrupt after preempt_schedule_irqTiejun Chen2013-01-28
| | | | | | | | | | | | | | | | | | | | | | In preempt case current arch_local_irq_restore() from preempt_schedule_irq() may enable hard interrupt but we really should disable interrupts when we return from the interrupt, and so that we don't get interrupted after loading SRR0/1. Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com> CC: <stable@vger.kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * powerpc/oprofile: Fix error in oprofile power7_marked_instr_event() functionCarl E. Love2013-01-28
| | | | | | | | | | | | | | | | | | | | | | | | The calculation for the left shift of the mask OPROFILE_PM_PMCSEL_MSK has an error. The calculation is should be to shift left by (max_cntrs - cntr) times the width of the pmsel field width. However, the #define OPROFILE_MAX_PMC_NUM was used instead of OPROFILE_PMSEL_FIELD_WIDTH. This patch fixes the calculation. Signed-off-by: Carl Love <cel@us.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * powerpc/pasemi: Fix crash on rebootSteven Rostedt2013-01-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit f96972f2dc "kernel/sys.c: call disable_nonboot_cpus() in kernel_restart()" added a call to disable_nonboot_cpus() on kernel_restart(), which tries to shutdown all the CPUs except the first one. The issue with the PA Semi, is that it does not support CPU hotplug. When the call is made to __cpu_down(), it calls the notifiers CPU_DOWN_PREPARE, and then tries to take the CPU down. One of the notifiers to the CPU hotplug code, is the cpufreq. The DOWN_PREPARE will call __cpufreq_remove_dev() which calls cpufreq_driver->exit. The PA Semi exit handler unmaps regions of I/O that is used by an interrupt that goes off constantly (system_reset_common, but it goes off during normal system operations too). I'm not sure exactly what this interrupt does. Running a simple function trace, you can see it goes off quite a bit: # tracer: function # # TASK-PID CPU# TIMESTAMP FUNCTION # | | | | | <idle>-0 [001] 1558.859363: .pasemi_system_reset_exception <-.system_reset_exception <idle>-0 [000] 1558.860112: .pasemi_system_reset_exception <-.system_reset_exception <idle>-0 [000] 1558.861109: .pasemi_system_reset_exception <-.system_reset_exception <idle>-0 [001] 1558.861361: .pasemi_system_reset_exception <-.system_reset_exception <idle>-0 [000] 1558.861437: .pasemi_system_reset_exception <-.system_reset_exception When the region is unmapped, the system crashes with: Disabling non-boot CPUs ... Error taking CPU1 down: -38 Unable to handle kernel paging request for data at address 0xd0000800903a0100 Faulting instruction address: 0xc000000000055fcc Oops: Kernel access of bad area, sig: 11 [#1] PREEMPT SMP NR_CPUS=64 NUMA PA Semi PWRficient Modules linked in: shpchp NIP: c000000000055fcc LR: c000000000055fb4 CTR: c0000000000df1fc REGS: c0000000012175d0 TRAP: 0300 Not tainted (3.8.0-rc4-test-dirty) MSR: 9000000000009032 <SF,HV,EE,ME,IR,DR,RI> CR: 24000088 XER: 00000000 SOFTE: 0 DAR: d0000800903a0100, DSISR: 42000000 TASK = c0000000010e9008[0] 'swapper/0' THREAD: c000000001214000 CPU: 0 GPR00: d0000800903a0000 c000000001217850 c0000000012167e0 0000000000000000 GPR04: 0000000000000000 0000000000000724 0000000000000724 0000000000000000 GPR08: 0000000000000000 0000000000000000 0000000000000001 0000000000a70000 GPR12: 0000000024000080 c00000000fff0000 ffffffffffffffff 000000003ffffae0 GPR16: ffffffffffffffff 0000000000a21198 0000000000000060 0000000000000000 GPR20: 00000000008fdd35 0000000000a21258 000000003ffffaf0 0000000000000417 GPR24: 0000000000a226d0 c000000000000000 0000000000000000 0000000000000000 GPR28: c00000000138b358 0000000000000000 c000000001144818 d0000800903a0100 NIP [c000000000055fcc] .set_astate+0x5c/0xa4 LR [c000000000055fb4] .set_astate+0x44/0xa4 Call Trace: [c000000001217850] [c000000000055fb4] .set_astate+0x44/0xa4 (unreliable) [c0000000012178f0] [c00000000005647c] .restore_astate+0x2c/0x34 [c000000001217980] [c000000000054668] .pasemi_system_reset_exception+0x6c/0x88 [c000000001217a00] [c000000000019ef0] .system_reset_exception+0x48/0x84 [c000000001217a80] [c000000000001e40] system_reset_common+0x140/0x180 Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * powerpc: Fix MAX_STACK_TRACE_ENTRIES too low warning for ppc32Li Zhong2013-01-28
| | | | | | | | | | | | | | | | | | | | This patch fixes MAX_STACK_TRACE_ENTRIES too low warning for ppc32, which is similar to commit 12660b17. Reported-by: Christian Kujau <lists@nerdbynature.de> Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Tested-by: Christian Kujau <lists@nerdbynature.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixesLinus Torvalds2013-01-28
| |\ | | | | | | | | | | | | | | | | | | Pull GFS2 fix from Steven Whitehouse. * git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes: GFS2: fix skip unlock condition
| | * GFS2: fix skip unlock conditionDavid Teigland2013-01-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | The recent commit fb6791d100d1bba20b5cdbc4912e1f7086ec60f8 included the wrong logic. The lvbptr check was incorrectly added after the patch was tested. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
| * | Merge tag 'iommu-fixes-v3.8-rc5' of ↵Linus Torvalds2013-01-28
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fix from Joerg Roedel: "One fix for the AMD IOMMU driver to work around broken BIOSes found in the field. Some BIOSes forget to enable a workaround for a hardware problem which might cause the IOMMU to stop working under high load conditions. The fix makes sure this workaround is enabled." * tag 'iommu-fixes-v3.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: IOMMU, AMD Family15h Model10-1Fh erratum 746 Workaround
| | * | IOMMU, AMD Family15h Model10-1Fh erratum 746 WorkaroundSuravee Suthikulpanit2013-01-28
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The IOMMU may stop processing page translations due to a perceived lack of credits for writing upstream peripheral page service request (PPR) or event logs. If the L2B miscellaneous clock gating feature is enabled the IOMMU does not properly register credits after the log request has completed, leading to a potential system hang. BIOSes are supposed to disable L2B micellaneous clock gating by setting L2_L2B_CK_GATE_CONTROL[CKGateL2BMiscDisable](D0F2xF4_x90[2]) = 1b. This patch corrects that for those which do not enable this workaround. Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Acked-by: Borislav Petkov <bp@suse.de> Cc: stable@vger.kernel.org Signed-off-by: Joerg Roedel <joro@8bytes.org>
| * | Merge tag 'mfd-for-linus-3.8-1' of ↵Linus Torvalds2013-01-28
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFD fixes from Samuel Ortiz: "This is the first pull request for MFD fixes for 3.8 We have some build failure fixes (twl4030, vexpress, abx500 and tps65910), some actual runtime oops and lockup fixes (rtsx, da9052), and some more hypothetical NULL pointers dereferences fixes for pcf50633 and max776xx. Then we also have additional rtsx fixes for a correct switch output voltage and clock divider correctness for rtl8411 (rtsx driver), and irqdomain fix for db8550-prcmu, and some more cosmetic fixes for arizona and wm5102." * tag 'mfd-for-linus-3.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: rtsx: Fix oops when rtsx_pci_sdmmc is not probed mfd: wm5102: Fix definition of WM5102_MAX_REGISTER mfd: twl4030: Don't warn about uninitialized return code mfd: da9052/53 lockup fix mfd: rtsx: Add clock divider hook mmc: rtsx: Call MFD hook to switch output voltage mfd: rtsx: Add output voltage switch hook mfd: Fix compile errors and warnings when !CONFIG_AB8500_BM mfd: vexpress: Export global functions to fix build error mfd: arizona: Check errors from regcache_sync() mfd: tc3589x: Use simple irqdomain mfd: pcf50633: Init pcf->dev before using it mfd: max77693: Init max77693->dev before using it mfd: max77686: Init max77686->dev before using it mfd: db8500-prcmu: Fix irqdomain usage mfd: tps65910: Select REGMAP_IRQ in Kconfig to fix build error mfd: arizona: Disable control interface reporting for WM5102 and WM5110
| | * | mfd: rtsx: Fix oops when rtsx_pci_sdmmc is not probedWei WANG2013-01-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If rtsx_pci_sdmmc is not probed, function pointer pcr->slots[].card_event will point to NULL, and thus rtsx_pci_card_detect will reference a NULL pointer. Check card_event pointer before referencing it can avoid kernel panic. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| | * | mfd: wm5102: Fix definition of WM5102_MAX_REGISTERMark Brown2013-01-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Updated in latest datasheet. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| | * | mfd: twl4030: Don't warn about uninitialized return codeArnd Bergmann2013-01-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the twl4030_write_script function gets called with a zero length argument, its return value does not get set. We know that all scripts have a nonzero length, but returning an error in case they ever do is probably appropriate. Without this patch, building omap2plus_defconfig results in: drivers/mfd/twl4030-power.c: In function 'load_twl4030_script': drivers/mfd/twl4030-power.c:414:5: error: 'err' may be used uninitialized in this function Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: "Kristo, Tero" <t-kristo@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| | * | mfd: da9052/53 lockup fixAshish Jangam2013-01-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | An issue has been reported where the PMIC either locks up or fails to respond following a system Reset. This could result in a second write in which the bus writes the current content of the write buffer to address of the last I2C access. The failure case is where this unwanted write transfers incorrect data to a critical register. This patch fixes this issue to by following any read or write with a dummy read to a safe register address. A safe register address is one where the contents will not affect the operation of the system. Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| | * | mfd: rtsx: Add clock divider hookWei WANG2013-01-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add callback function conv_clk_and_div_n to convert between SSC clock and its divider N. For rtl8411, the formula to calculate SSC clock divider N is different with the other card reader models. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| | * | mmc: rtsx: Call MFD hook to switch output voltageWei WANG2013-01-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Different card reader has different method to switch output voltage, so we have to use the callback function provided by MFD driver to switch output pad voltage. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| | * | mfd: rtsx: Add output voltage switch hookWei WANG2013-01-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Different card reader has different method to switch output voltage, add this callback to let the card reader implement its individual switch function. This is needed as rtl8411 has a specific switch output voltage procedure. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| | * | mfd: Fix compile errors and warnings when !CONFIG_AB8500_BMLee Jones2013-01-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/mfd/ab8500-core.c:1015:21: error: ‘ab8500_bm_data’ undeclared here include/linux/mfd/abx500/ab8500-bm.h:445:13: warning: ‘ab8500_fg_reinit’ defined but not used include/linux/mfd/abx500/ab8500-bm.h:448:13: warning: ‘ab8500_charger_usb_state_changed’ defined but not used include/linux/mfd/abx500/ab8500-bm.h:451:29: warning: ‘ab8500_btemp_get’ defined but not used include/linux/mfd/abx500/ab8500-bm.h:455:12: warning: ‘ab8500_btemp_get_batctrl_temp’ defined but not used include/linux/mfd/abx500/ab8500-bm.h:463:12: warning: ‘ab8500_fg_inst_curr_blocking’ defined but not used include/linux/mfd/abx500/ab8500-bm.h:442:12: warning: ‘ab8500_fg_inst_curr_done’ defined but not used include/linux/mfd/abx500/ab8500-bm.h:447:26: warning: ‘ab8500_fg_get’ defined but not used Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| | * | mfd: vexpress: Export global functions to fix build errorGuenter Roeck2013-01-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Compiling vexpress client drivers as module results in error messages such as ERROR: "__vexpress_config_func_get" [drivers/hwmon/vexpress.ko] undefined! ERROR: "vexpress_config_func_put" [drivers/hwmon/vexpress.ko] undefined! This is because the global functions in drivers/mfd/vexpress-config.c are not exported. Fix it. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| | * | mfd: arizona: Check errors from regcache_sync()Mark Brown2013-01-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the control bus is unrelabile we may hit errors during regcache_sync(), especially given that it tends to be one the most dense bursts of I/O in many systems. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| | * | mfd: tc3589x: Use simple irqdomainLinus Walleij2013-01-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes a regression in the TC3589x driver introduced in commit 15e27b1088245a2de3b7d09d39cd209212eb16af "mfd: Provide the tc3589x with its own IRQ domain" If a system with a TC3589x expander is booted and a base IRQ is passed from platform data, a legacy domain will be used. However, since the Ux500 is now switched to use SPARSE_IRQ, no descriptors get allocated on-the-fly, and we get a crash. Fix this by switching to using the simple irqdomain that will handle this uniformly and also allocates descriptors explicitly. Also fix two small whitespace errors in the vicinity while we're at it. Cc: stable@kernel.org Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| | * | mfd: pcf50633: Init pcf->dev before using itAxel Lin2013-01-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current code uses pcf->dev in the dev_err call before setting it to &client->dev. Fix it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| | * | mfd: max77693: Init max77693->dev before using itAxel Lin2013-01-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current code uses max77693->dev in the dev_err call before setting it to &i2c->dev. Fix it. This patch also includes below cleanups: - Move checking pdata earlier and show dev_err if no platform data found. - Remove unnecessary err_regmap goto label. - Unregister i2c devices if regmap init for muic fails. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| | * | mfd: max77686: Init max77686->dev before using itAxel Lin2013-01-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current code uses max77686->dev in the dev_err call before setting it to &i2c->dev. Fix it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| | * | mfd: db8500-prcmu: Fix irqdomain usageLinus Walleij2013-01-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes two issues with the DB8500 PRCMU irqdomain: - You have to state the irq base 0 to get a linear domain for the DT case from irq_domain_add_simple() - The irqdomain was not used to translate the initial irq request using irq_create_mapping() making the linear case fail as it was lacking a proper descriptor. I took this opportunity to fix two lines of whitespace errors in related code as I was anyway messing around with it. Cc: stable@kernel.org Acked-by Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-10-13 21:24:12 -0400