aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
* CS5536: apply pci quirk for BIOS SMBUS bugAndres Salomon2010-02-05
| | | | | | | | | | | | | | | | | | | | | | | | | | The new cs5535-* drivers use PCI header config info rather than MSRs to determine the memory region to use for things like GPIOs and MFGPTs. As anticipated, we've run into a buggy BIOS: [ 0.081818] pci 0000:00:14.0: reg 10: [io 0x6000-0x7fff] [ 0.081906] pci 0000:00:14.0: reg 14: [io 0x6100-0x61ff] [ 0.082015] pci 0000:00:14.0: reg 18: [io 0x6200-0x63ff] [ 0.082917] pci 0000:00:14.2: reg 20: [io 0xe000-0xe00f] [ 0.083551] pci 0000:00:15.0: reg 10: [mem 0xa0010000-0xa0010fff] [ 0.084436] pci 0000:00:15.1: reg 10: [mem 0xa0011000-0xa0011fff] [ 0.088816] PCI: pci_cache_line_size set to 32 bytes [ 0.088938] pci 0000:00:14.0: address space collision: [io 0x6100-0x61ff] already in use [ 0.089052] pci 0000:00:14.0: can't reserve [io 0x6100-0x61ff] This is a Soekris board, and its BIOS sets the size of the PCI ISA bridge device's BAR0 to 8k. In reality, it should be 8 bytes (BAR0 is used for SMBus stuff). This quirk checks for an incorrect size, and resets it accordingly. Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Tested-by: Leigh Porter <leigh@leighporter.org> Tested-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* percpu: add __percpu for sparseStephen Rothwell2010-02-05
| | | | | | | | | | | This is to make the annotation of percpu variables during the next merge window less painfull. Extracted from a patch by Rusty Russell. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'drm-linus' of ↵Linus Torvalds2010-02-05
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: fix r300 vram width calculations drm/radeon/kms: rs400/480 MC setup is different than r300. drm/radeon/kms: make initial state of load detect property correct. drm/radeon/kms: disable HDMI audio for now on rv710/rv730 drm/radeon/kms: don't call suspend path before cleaning up GPU drivers/gpu/drm/radeon/radeon_combios.c: fix warning ati_pcigart: fix printk format warning drm/r100/kms: Emit cache flush to the end of command buffer. (v2) drm/radeon/kms: fix regression rendering issue on R6XX/R7XX drm/radeon/kms: move blit initialization after we disabled VGA
| * drm/radeon/kms: fix r300 vram width calculationsDave Airlie2010-02-04
| | | | | | | | | | | | | | This was incorrect according to the docs and the UMS driver does it like this. Signed-off-by: Dave Airlie <airlied@redhat.com>
| * drm/radeon/kms: rs400/480 MC setup is different than r300.Dave Airlie2010-02-04
| | | | | | | | | | | | | | | | | | | | Boot testing on my rs480 laptop found the MC idle never happened on startup, a quick check with AMD found the idle bit is in a different place on the rs4xx than r300. Implement a new rs400 mc idle function to fix this. Signed-off-by: Dave Airlie <airlied@redhat.com>
| * drm/radeon/kms: make initial state of load detect property correct.Dave Airlie2010-02-04
| | | | | | | | | | | | this was incorrect on my rs480. Signed-off-by: Dave Airlie <airlied@redhat.com>
| * drm/radeon/kms: disable HDMI audio for now on rv710/rv730Dave Airlie2010-02-04
| | | | | | | | | | | | | | Support isn't correct yet and we are getting green tinges on the displays. Signed-off-by: Dave Airlie <airlied@redhat.com>
| * drm/radeon/kms: don't call suspend path before cleaning up GPUJerome Glisse2010-02-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | In suspend path we unmap the GART table while in cleaning up path we will unbind buffer and thus try to write to unmapped GART leading to oops. In order to avoid this we don't call the suspend path in cleanup path. Cleanup path is clever enough to desactive GPU like the suspend path is doing, thus this was redondant. Tested on: RV370, R420, RV515, RV570, RV610, RV770 (all PCIE) Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
| * drivers/gpu/drm/radeon/radeon_combios.c: fix warningAndrew Morton2010-02-04
| | | | | | | | | | | | | | | | | | drivers/gpu/drm/radeon/radeon_combios.c: In function 'radeon_combios_get_lvds_info': drivers/gpu/drm/radeon/radeon_combios.c:893: warning: comparison is always false due to limited range of data type Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
| * ati_pcigart: fix printk format warningRandy Dunlap2010-02-04
| | | | | | | | | | | | | | | | | | | | | | | | Fix ati_pcigart printk format warning: drivers/gpu/drm/ati_pcigart.c:115: warning: format '%Lx' expects type 'long long unsigned int', but argument 3 has type 'dma_addr_t' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
| * drm/r100/kms: Emit cache flush to the end of command buffer. (v2)Pauli Nieminen2010-02-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Cache flush is required in case CPU is accessing rendered data. This fixes glean/readPixSanity test case and random rendering errors in sauerbraten and warzone2100. v2 Fix comment ordering in r100_fence_ring_emit and remove extra defines added in first version. Signed-off-by: Pauli Nieminen <suokkos@gmail.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
| * drm/radeon/kms: fix regression rendering issue on R6XX/R7XXJerome Glisse2010-02-04
| | | | | | | | | | | | | | | | | | | | | | | | It seems that some R6XX/R7XX silently ignore HDP flush when programmed through ring, this patch addback an ioctl callback to allow R6XX/R7XX hw to perform such flush through MMIO in order to fix a regression. For more details see: http://bugzilla.kernel.org/show_bug.cgi?id=15186 Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
| * drm/radeon/kms: move blit initialization after we disabled VGAJerome Glisse2010-02-04
| | | | | | | | | | | | | | | | | | | | VGA might be overwritting VRAM and corrupt our blit shader leading to corruption, it likely won't happen if you load fbcon right after radeon. Thanks to Shawn Starr and Andre Maasikas for tracking down this issue. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds2010-02-05
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: apply updated fallocate i_size fix Btrfs: do not try and lookup the file extent when finishing ordered io Btrfs: Fix oopsen when dropping empty tree. Btrfs: remove BUG_ON() due to mounting bad filesystem Btrfs: make error return negative in btrfs_sync_file() Btrfs: fix race between allocate and release extent buffer.
| * | Btrfs: apply updated fallocate i_size fixAneesh Kumar K.V2010-02-04
| | | | | | | | | | | | | | | | | | | | | | | | This version of the i_size fix for fallocate makes sure we only update the i_size when the current fallocate is really operating outside of i_size. Signed-off-by: Chris Mason <chris.mason@oracle.com>
| * | Btrfs: do not try and lookup the file extent when finishing ordered ioJosef Bacik2010-02-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When running the following fio job [torrent] filename=torrent-test rw=randwrite size=4g filesize=4g bs=4k ioengine=sync you would see long stalls where no work was being done. That is because we were doing all this extra work to read in the file extent outside of the transaction, however in the random io case this ends up hurting us because the file extents are not there to begin with. So axe this logic, since we end up reading in the file extent when we go to update it anyway. This took the fio job from 11 mb/s with several ~10 second stalls to 24 mb/s to a couple of 1-2 second stalls. Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
| * | Btrfs: Fix oopsen when dropping empty tree.Yan, Zheng2010-02-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | When dropping a empty tree, walk_down_tree() skips checking extent information for the tree root. This will triggers a BUG_ON in walk_up_proc(). Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
| * | Btrfs: remove BUG_ON() due to mounting bad filesystemMiao Xie2010-02-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Mounting a bad filesystem caused a BUG_ON(). The following is steps to reproduce it. # mkfs.btrfs /dev/sda2 # mount /dev/sda2 /mnt # mkfs.btrfs /dev/sda1 /dev/sda2 (the program says that /dev/sda2 was mounted, and then exits. ) # umount /mnt # mount /dev/sda1 /mnt At the third step, mkfs.btrfs exited in the way of make filesystem. So the initialization of the filesystem didn't finish. So the filesystem was bad, and it caused BUG_ON() when mounting it. But BUG_ON() should be called by the wrong code, not user's operation, so I think it is a bug of btrfs. This patch fixes it. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
| * | Btrfs: make error return negative in btrfs_sync_file()Roel Kluin2010-02-04
| | | | | | | | | | | | | | | | | | | | | It appears the error return should be negative Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
| * | Btrfs: fix race between allocate and release extent buffer.Yan, Zheng2010-02-04
| | | | | | | | | | | | | | | | | | | | | | | | Increase extent buffer's reference count while holding the lock. Otherwise it can race with try_release_extent_buffer. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
* | | Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2010-02-04
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/home/rmk/linux-2.6-arm: ARM: Fix wrong register in proc-arm6_7.S data abort handler ARM: 5909/1: ARM: Correct the FPSCR bits setting when raising exceptions ARM: 5904/1: ARM: Always generate the IT instruction when compiling for Thumb-2 ARM: 5907/1: ARM: Fix the reset on the RealView PBX Development board mx35: add a missing comma in a pad definition mx25: make the FEC AHB clk secondary of the IPG mx25: fix time accounting mx25: properly initialize clocks mx25: remove unused mx25_clocks_init() argument i.MX25: implement secondary clocks for uarts and fec i.MX25: Allow secondary clocks in DEFINE_CLOCK ARM: MX3: Fixed typo in declared enum type name. MXC: Add AUDMUXv2 register decode to debugfs mx31ads: Provide an IRQ range to the WM835x on the 1133-EV1 module mx31ads: Provide a name for EXPIO interrupt chip mx31ads: Allow enable/disable of switchable supplies
| * | | ARM: Fix wrong register in proc-arm6_7.S data abort handlerRussell King2010-02-03
| | | | | | | | | | | | | | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6Russell King2010-02-01
| |\ \ \
| | * | | mx35: add a missing comma in a pad definitionUwe Kleine-König2010-01-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reported-by: Tim Sander <tstone@vlsi.informatik.tu-darmstadt.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * | | mx25: make the FEC AHB clk secondary of the IPGBaruch Siach2010-01-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This makes the FEC clock configuration consistent with the UART one. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * | | mx25: fix time accountingBaruch Siach2010-01-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The gpt_clk rate function doesn't consider the PER divider. This causes a significant drift in time accounting. Fix this by introducing the correct rate calculation function. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * | | mx25: properly initialize clocksBaruch Siach2010-01-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch disables all unnecessary clock in mx25_clocks_init() to make a clean start, the same as is being done for the rest of the i.MX chips. This patch was tested on i.MX25 PDK. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * | | mx25: remove unused mx25_clocks_init() argumentBaruch Siach2010-01-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The fref is needless on mx25 since the reference clock is fixed at 24MHz. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * | | i.MX25: implement secondary clocks for uarts and fecSascha Hauer2010-01-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For uarts and fec need two clocks, implement it using the secondary clock field in struct clk. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * | | i.MX25: Allow secondary clocks in DEFINE_CLOCKSascha Hauer2010-01-26
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * | | ARM: MX3: Fixed typo in declared enum type name.Vladimir Zapolskiy2010-01-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To distinguish between mx31lite and mx31lilly boards better to use different enum types. Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com> Acked-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * | | MXC: Add AUDMUXv2 register decode to debugfsMark Brown2010-01-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since AUDMUX configuration appears to be one of the common stumbling blocks for people setting up i.MX audio try to provide some diagnostic information describing the current setup to assisist people in working out what's going on. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * | | mx31ads: Provide an IRQ range to the WM835x on the 1133-EV1 moduleMark Brown2010-01-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The WM8350 core won't actually use the range yet, but it will in future and the platform data to configure it is there now. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * | | mx31ads: Provide a name for EXPIO interrupt chipMark Brown2010-01-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This makes it a bit more obvious in genirq diagnostics that they aren't handled by the i.MX interrupt controller. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * | | mx31ads: Allow enable/disable of switchable suppliesMark Brown2010-01-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | They will be automatically powered off at startup so users will need to enable them for use. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * | | | ARM: 5909/1: ARM: Correct the FPSCR bits setting when raising exceptionsCatalin Marinas2010-02-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit c98929c07a removed the clearing of the FPSCR[31:28] bits from the vfp_raise_exceptions() function and the new bits are or'ed with the old FPSCR bits leading to unexpected results (the original commit was referring to the cumulative bits - FPSCR[4:0]). Reported-by: Tom Hameenanttila <tmhameen@marvell.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | | ARM: 5904/1: ARM: Always generate the IT instruction when compiling for Thumb-2Catalin Marinas2010-01-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current behaviour is to generate the IT instruction only for Thumb-2 code. However, the kernel helpers in entry-armv.S are compiled to ARM in a unified syntax file (if THUMB2_KERNEL). Recent compilers warn about missing IT instruction in unified assembly syntax files. The patch changes the "-mimplicit-it" gas option to "always". Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | | ARM: 5907/1: ARM: Fix the reset on the RealView PBX Development boardColin Tuckley2010-01-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Colin Tuckley <colin.tuckley@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | | | Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds2010-02-04
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: omap: Disable serial port autoidle by default omap: Fix access to already released memory in clk_debugfs_register_one() omap: Fix arch/arm/mach-omap2/mux.c: Off by one error omap: Fix 3630 mux errors OMAP2/3: GPMC: ensure valid clock pointer OMAP2/3: IRQ: ensure valid base address ARCH OMAP : enable ARCH_HAS_HOLES_MEMORYMODEL for OMAP omap: Remove old unused defines for OMAP_32KSYNCT_BASE omap: define _toggle_gpio_edge_triggering only for OMAP1
| * | | | | omap: Disable serial port autoidle by defaultTony Lindgren2010-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the omap serial clocks are autoidled after 5 seconds. However, this causes lost characters on the serial ports. As this is considered non-standard behaviour for Linux, disable the timeout. Note that this will also cause blocking of any deeper omap sleep states. To enable the autoidling of the serial ports, do something like this for each serial port: # echo 5 > /sys/devices/platform/serial8250.0/sleep_timeout # echo 5 > /sys/devices/platform/serial8250.1/sleep_timeout ... Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | | | | omap: Fix access to already released memory in clk_debugfs_register_one()Marek Skuczynski2010-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I have found an access to already released memory in clk_debugfs_register_one() function. Signed-off-by: Marek Skuczynski <mareksk7@gmail.com> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | | | | omap: Fix arch/arm/mach-omap2/mux.c: Off by one errorTony Lindgren2010-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | David Binderman ran the sourceforge tool cppcheck over the source code of the new Linux kernel 2.6.33-rc6: [./arm/mach-omap2/mux.c:492]: (error) Buffer access out-of-bounds 13 characters + 1 digit + 1 zero byte is more than 14 characters. Also add a comment on mode0 name length in case new omaps start using longer names. Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | | | | omap: Fix 3630 mux errorsTony Lindgren2010-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 3630 has more mux signals than 34xx. The additional pins exist in omap36xx_cbp_subset, but are not initialized as the superset is missing these offsets. This causes the following errors during the boot: mux: Unknown entry offset 0x236 mux: Unknown entry offset 0x22e mux: Unknown entry offset 0x1ec mux: Unknown entry offset 0x1ee mux: Unknown entry offset 0x1f4 mux: Unknown entry offset 0x1f6 mux: Unknown entry offset 0x1f8 mux: Unknown entry offset 0x1fa mux: Unknown entry offset 0x1fc mux: Unknown entry offset 0x22a mux: Unknown entry offset 0x226 mux: Unknown entry offset 0x230 mux: Unknown entry offset 0x22c mux: Unknown entry offset 0x228 Fix this by adding the missing offsets to omap3 superset. Note that additionally the uninitialized pins need to be skipped on 34xx. Based on an earlier patch by Allen Pais <allen.pais@ti.com>. Reported-by: Allen Pais <allen.pais@ti.com> Signed-off-by: Allen Pais <allen.pais@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | | | | OMAP2/3: GPMC: ensure valid clock pointerKevin Hilman2010-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ensure valid clock pointer during GPMC init. Fixes compiler warning about potential use of uninitialized variable. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | | | | OMAP2/3: IRQ: ensure valid base addressKevin Hilman2010-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ensure valid base address during IRQ init. Fixes compiler warning about potential use of uninitialized variable. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | | | | ARCH OMAP : enable ARCH_HAS_HOLES_MEMORYMODEL for OMAPSriram2010-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OMAP platforms(like OMAP3530) include DSP or other co-processors for media acceleration. when carving out memory for the accelerators we can end up creating a hole in the memory map of sort: <kernel memory><hole(memory for accelerator)><kernel memory> To handle such a memory configuration ARCH_HAS_HOLES_MEMORYMODEL has to be enabled. For further information refer discussion at: http://www.mail-archive.com/linux-omap@vger.kernel.org/msg15262.html. Signed-off-by: Sriramakrishnan <srk@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | | | | omap: Remove old unused defines for OMAP_32KSYNCT_BASETony Lindgren2010-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove old unused defines for OMAP_32KSYNCT_BASE Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | | | | omap: define _toggle_gpio_edge_triggering only for OMAP1Uwe Kleine-König2010-01-29
| |/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The only usage of _toggle_gpio_edge_triggering is in an #ifdef CONFIG_ARCH_OMAP1 block, so only provide it if CONFIG_ARCH_OMAP1 is defined, too. This fixes a compiler warning: arch/arm/plat-omap/gpio.c:758: warning: '_toggle_gpio_edge_triggering' defined but not used when compiling for ARCH_OMAP2, ARCH_OMAP3 or ARCH_OMAP4. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | | | | Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6Linus Torvalds2010-02-04
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: NFS: Don't clobber the attribute type in nfs_update_inode() NFS: Fix a umount race NFS: Fix an Oops when truncating a file NFS: Ensure that we handle NFS4ERR_STALE_STATEID correctly NFSv4.1: Don't call nfs4_schedule_state_recovery() unnecessarily NFSv4: Don't allow posix locking against servers that don't support it NFSv4: Ensure that the NFSv4 locking can recover from stateid errors NFS: Avoid warnings when CONFIG_NFS_V4=n NFS: Make nfs_commitdata_release static NFS: Try to commit unstable writes in nfs_release_page() NFS: Fix a reference leak in nfs_wb_cancel_page()
| * | | | | NFS: Don't clobber the attribute type in nfs_update_inode()Trond Myklebust2010-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the NFS_ATTR_FATTR_TYPE field isn't set in fattr->valid, then we should not set the S_IFMT part of inode->i_mode. Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
generated by cgit v1.2.2 (git 2.25.0) at 2025-02-14 01:19:04 -0500