aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
* natsemi: Support Aculab E1/T1 PMXc cPCI carrier cardsMark Brown2007-02-20
| | | | | | | | | | Aculab E1/T1 PMXc cPCI carrier card cards present a natsemi on the cPCI bus with an oversized EEPROM using a direct MII<->MII connection with no PHY. This patch adds a new device table entry supporting these cards. Signed-Off-By: Mark Brown <broonie@sirena.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* natsemi: Add support for using MII port with no PHYMark Brown2007-02-20
| | | | | | | | | | | | | | | | This patch provides code paths which allow the natsemi driver to use the external MII port on the chip but ignore any PHYs that may be attached to it. The link state will be left as it was when the driver started and can be configured via ethtool. Any PHYs that are present can be accessed via the MII ioctl()s. This is useful for systems where the device is connected without a PHY or where either information or actions outside the scope of the driver are required in order to use the PHYs. Signed-Off-By: Mark Brown <broonie@sirena.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* skge: race with workq and RTNLStephen Hemminger2007-02-20
| | | | | | | | | | If a workqueue function that needs RTNL is running when skge_down is called then a deadlock is possible. Fix by only clearing the timer, and handling the flush_scheduled_work on removal. This work queue is only ever used for the old fiber based boards. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Replace local random function with random32()Ralf Baechle2007-02-20
| | | | | | Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* s2io: RTNL and flush_scheduled_work deadlockFrancois Romieu2007-02-20
| | | | | | | Mantra: don't use flush_scheduled_work with RTNL held. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* 8139too: RTNL and flush_scheduled_work deadlockFrancois Romieu2007-02-20
| | | | | | | | | | | Your usual dont-flush_scheduled_work-with-RTNL-held stuff. It is a bit different here since the thread runs permanently or is only occasionally kicked for recovery depending on the hardware revision. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* sis190: RTNL and flush_scheduled_work deadlockFrancois Romieu2007-02-20
| | | | | Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* r8169: RTNL and flush_scheduled_work deadlockFrancois Romieu2007-02-20
| | | | | | | | | | | flush_scheduled_work() in net_device->close has a slight tendency to deadlock with tasks on the workqueue that hold RTNL. rtl8169_close/down simply need the recovery tasks to not meddle with the hardware while the device is going down. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds2007-02-19
|\ | | | | | | | | | | | | | | | | | | * 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Cobalt: Fix UART I/O type [MIPS] Fixup copy_from_user_inatomic [MIPS] Fix struct sigcontext for N32 userland [MIPS] Make some __setup functions static [MIPS] Declare highstart_pfn, highend_pfn only if CONFIG_HIGHMEM=y [MIPS] Allow selection of KGDB only on platforms where it's supported.
| * [MIPS] Cobalt: Fix UART I/O typeYoichi Yuasa2007-02-19
| | | | | | | | | | | | | | The Cobalt UART is actually connected to memory resource area. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * [MIPS] Fixup copy_from_user_inatomicRalf Baechle2007-02-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From the 01408c4939479ec46c15aa7ef6e2406be50eeeca log message: The problem is that when we write to a file, the copy from userspace to pagecache is first done with preemption disabled, so if the source address is not immediately available the copy fails *and* *zeros* *the* *destination*. This is a problem because a concurrent read (which admittedly is an odd thing to do) might see zeros rather that was there before the write, or what was there after, or some mixture of the two (any of these being a reasonable thing to see). If the copy did fail, it will immediately be retried with preemption re-enabled so any transient problem with accessing the source won't cause an error. The first copying does not need to zero any uncopied bytes, and doing so causes the problem. It uses copy_from_user_atomic rather than copy_from_user so the simple expedient is to change copy_from_user_atomic to *not* zero out bytes on failure. < --- end cite --- > This patch finally implements at least a not so pretty solution by duplicating the relevant part of __copy_user. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * [MIPS] Fix struct sigcontext for N32 userlandAtsushi Nemoto2007-02-19
| | | | | | | | | | | | | | | | | | | | The kernel use 64-bit for sc_regs[0], and both N32/N64 userland expects it was 64-bit. But size of 'long' on N32 is actually 32-bit. So this definition make some confusion. Use __u32 and __u64 for N32/N64 sigcontext to get rid of this confusion. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * [MIPS] Make some __setup functions staticAtsushi Nemoto2007-02-19
| | | | | | | | | | | | | | | | This fixes some sparse warnings. ("warning: symbol 'foo' was not declared. Should it be static?") Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * [MIPS] Declare highstart_pfn, highend_pfn only if CONFIG_HIGHMEM=yRalf Baechle2007-02-19
| | | | | | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * [MIPS] Allow selection of KGDB only on platforms where it's supported.Ralf Baechle2007-02-19
| | | | | | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | [PATCH] Fix a free-wrong-pointer bug in nfs/acl server.Greg Banks2007-02-19
|/ | | | | | | | | Due to type confusion, when an nfsacl verison 2 'ACCESS' request finishes and tries to clean up, it calls fh_put on entiredly the wrong thing and this can cause an oops. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] tick management: make broadcast dependent on local APICThomas Gleixner2007-02-19
| | | | | | | | | | The broadcast functionality is only necessary when a local APIC is available. Make the config switch depend on X86_LOCAL_APIC. This resolves the mach-voyager breakage introduced by the tick managament code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] Declare init_irq_proc before we use it.Andrew Morton2007-02-19
| | | | | | | | | | | | | | | | | | | | | | | powerpc gets: init/main.c: In function `do_basic_setup': init/main.c:714: warning: implicit declaration of function `init_irq_proc' but we cannot include linux/irq.h in generic code. Fix it by moving the declaration into linux/interrupt.h instead. And make sure all code that defines init_irq_proc() is including linux/interrupt.h. And nuke an ifdef-in-C Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] fs/stack.c: Copy i_nlink after all other attributes are copiedErez Zadok2007-02-19
| | | | | | | | | A user-specified get_nlinks may depend on other inode attributes. Cc: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Erez Zadok <ezk@cs.sunysb.edu> Signed-off-by: Josef 'Jeff' Sipek <jsipek@cs.sunysb.edu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] NOHZ: Produce debug output instead of a BUG()Thomas Gleixner2007-02-19
| | | | | | | | | The BUG_ON() in tick_nohz_stop_sched_tick() triggers on some boxen. Remove the BUG_ON and print information about the pending softirq to allow better debugging of the problem. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] NOHZ: Fix RCU handlingIngo Molnar2007-02-19
| | | | | | | | | When a CPU is needed for RCU the tick has to continue even when it was stopped before. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds2007-02-19
|\ | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] machzwd warning fix
| * [WATCHDOG] machzwd warning fixAndrew Morton2007-02-17
| | | | | | | | | | | | | | | | | | | | | | From: Andrew Morton <akpm@linux-foundation.org> drivers/char/watchdog/machzwd.c: In function 'zf_ioctl': drivers/char/watchdog/machzwd.c:327: warning: passing argument 1 of 'zf_ping' makes integer from pointer without a cast Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* | Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds2007-02-19
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Update defconfigs [MIPS] Support for several more SNI RM models. [MIPS] Include <asm/bugs> to for declaration of check_bugs32. [MIPS] Add external declaration of pagetable_init() to pgalloc.h [MIPS] Make kernel_thread_helper() static [MIPS] Make __declare_dbe_table static and avoid it getting optimized away [MIPS] Use MIPS R2 instructions for bitops. [MIPS] signals: Share even more code. [MIPS] Fix CONFIG_MIPS32_N32=y CONFIG_MIPS32_O32=n build [MIPS] Iomap implementation. [MIPS] <asm/compat-signal.h> needs to include <asm/uaccess.h>. [MIPS] IP27: Fix warning. [MIPS] Fix sigset_t endianess swapping issues in 32-bit compat code.
| * | [MIPS] Update defconfigsRalf Baechle2007-02-18
| | | | | | | | | | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | [MIPS] Support for several more SNI RM models.Thomas Bogendoerfer2007-02-18
| | | | | | | | | | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | [MIPS] Include <asm/bugs> to for declaration of check_bugs32.Ralf Baechle2007-02-18
| | | | | | | | | | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | [MIPS] Add external declaration of pagetable_init() to pgalloc.hAtsushi Nemoto2007-02-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes some sparse warnings. pgtable-32.c:15:6: warning: symbol 'pgd_init' was not declared. Should it be static? pgtable-32.c:32:13: warning: symbol 'pagetable_init' was not declared. Should it be static? Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | [MIPS] Make kernel_thread_helper() staticAtsushi Nemoto2007-02-18
| | | | | | | | | | | | | | | Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | [MIPS] Make __declare_dbe_table static and avoid it getting optimized awayRalf Baechle2007-02-18
| | | | | | | | | | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | [MIPS] Use MIPS R2 instructions for bitops.Ralf Baechle2007-02-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add R2 optimized variants of clear_bit, set_bit and test_and_clear_bit. With gcc 4.1.1 this saves 1592 bytes on a defconfig (minus IPv6) kernel. Turns out that R2 bitop instructions are no gain for the other bitop functions. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | [MIPS] signals: Share even more code.Ralf Baechle2007-02-18
| | | | | | | | | | | | | | | | | | | | | native and compat do_signal and handle_signal are identical and can easily be unified. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | [MIPS] Fix CONFIG_MIPS32_N32=y CONFIG_MIPS32_O32=n buildRalf Baechle2007-02-18
| | | | | | | | | | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | [MIPS] Iomap implementation.Ralf Baechle2007-02-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This implementation has support for the concept of one separate ioport address space by PCI domain. A pointer to the virtual address where the port space of a domain has been mapped has been added to struct pci_controller and systems should be fixed to fill in this value. For single domain systems this will be the same value as passed to set_io_port_base(). Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | [MIPS] <asm/compat-signal.h> needs to include <asm/uaccess.h>.Ralf Baechle2007-02-18
| | | | | | | | | | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | [MIPS] IP27: Fix warning.Ralf Baechle2007-02-18
| | | | | | | | | | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | [MIPS] Fix sigset_t endianess swapping issues in 32-bit compat code.Atsushi Nemoto2007-02-18
| |/ | | | | | | | | | | | | | | | | | | access_ok in compat-signal.h is wrong (checking destination instead of source) and redundant (already checked before calling this function). Also sf_mask in struct sigframe32 should be compat_sigset_t type. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds2007-02-19
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: hwmon/vt1211: Add probing of alternate config index port hwmon/f71805f: Fix a race condition hwmon/abituguru: Fix unchecked return status hwmon: New driver for the Analog Devices ADM1029 hwmon/w83627ehf: Add support for the W83627DHG chip hwmon: Use subsys_initcall hwmon/lm70: Make lm70_remove a __devexit function hwmon: Cleanup a bogus legacy comment hwmon: Simplify the locking model of two drivers hwmon: Drop unused mutexes in two drivers hwmon/it87: Add PWM base frequency control
| * | hwmon/vt1211: Add probing of alternate config index portJuerg Haefliger2007-02-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The configuration index port of the vt1211 can be accessed at two different addresses 0x2e or 0x4e, depending on pin strappings. This patch adds support to scan both addresses during module initialization. Signed-off-by: Juerg Haefliger <juergh@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | hwmon/f71805f: Fix a race conditionJean Delvare2007-02-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I think I introduced a potential race condition bug with commit 51c997d80e1f625aea3426a8a9087f5830ac6db3. I didn't realize it back then, but platform_device_put and platform_device_release both appear to free the platform data associated with the device. This makes an explicit kfree redundant at best, and maybe even racy, as it might occur while someone still holds a reference to the platform device. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | hwmon/abituguru: Fix unchecked return statusHans de Goede2007-02-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | Fix an unused return value warning for the abituguru driver. Also make sure the sysfs files are created before we register with the hwmon class, and delete the sysfs files on driver removal. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | hwmon: New driver for the Analog Devices ADM1029Corentin Labbe2007-02-14
| | | | | | | | | | | | | | | Signed-off-by: Corentin Labbe <corentin.labbe@geomatys.fr> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | hwmon/w83627ehf: Add support for the W83627DHG chipDavid Hubbard2007-02-14
| | | | | | | | | | | | | | | Signed-off-by: David Hubbard <david.c.hubbard@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | hwmon: Use subsys_initcallDavid Brownell2007-02-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Subsystem infrastructure should normally register with "subsys_initcall", so that it's available to drivers that may need to initialize early. This patch updates "hwmon" to do so. It's common for embedded systems to have multifunction chips with hardware monitoring interfaces, and to have those chips be used during system bringup ... before a normal "module_init" would kick, or maybe just linked so they'd init before hwmon. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | hwmon/lm70: Make lm70_remove a __devexit functionRalf Baechle2007-02-14
| | | | | | | | | | | | | | | | | | | | | This fixes a potential broken reference. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | hwmon: Cleanup a bogus legacy commentJean Delvare2007-02-14
| | | | | | | | | | | | | | | | | | | | | Cleanup a bogus legacy comment that has been replicated to many hardware monitoring drivers. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | hwmon: Simplify the locking model of two driversJean Delvare2007-02-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many hardware monitoring drivers use two different mutexes, one to protect their per-device data structure, and one to protect the access to the device registers. These mutexes are essentially redundant, as the drivers are transfering values between the device registers and the data cache, so they almost always end up holding both mutexes at the same time. Using a single mutex will make the code more simple and faster. I am changing only two of the affected drivers here, the authors of the other affected drivers are welcome to submit similar patches if they want. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | hwmon: Drop unused mutexes in two driversJean Delvare2007-02-14
| | | | | | | | | | | | Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | hwmon/it87: Add PWM base frequency controlJean Delvare2007-02-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Let the user select the base PWM frequency when using the it87 hardware monitoring driver. Different frequencies can give better control on some fans. Also update the documentation to mention the PWM frequency control files, with misc cleanups to the PWM section. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* | | Merge git://git.infradead.org/mtd-2.6Linus Torvalds2007-02-19
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.infradead.org/mtd-2.6: (49 commits) [MTD] [NAND] S3C2412 fix hw ecc [MTD] [NAND] Work around false compiler warning in CAFÉ driver [JFFS2] printk warning fixes [MTD] [MAPS] ichxrom warning fix [MTD] [MAPS] amd76xrom warning fix [MTD] [MAPS] esb2rom warning fixes [MTD] [MAPS] ck804xrom warning fix [MTD] [MAPS] netsc520 warning fix [MTD] [MAPS] sc520cdp warning fix [MTD] [ONENAND] onenand_base warning fix [MTD] [NAND] eXcite nand flash driver [MTD] Improve heuristic for detecting wrong-endian RedBoot partition table [MTD] Fix RedBoot partition parsing regression harder. [MTD] [NAND] S3C2410: Hardware ECC correction code [JFFS2] Use MTD_OOB_AUTO to automatically place cleanmarker on NAND [MTD] Clarify OOB-operation interface comments [MTD] remove unused ecctype,eccsize fields from struct mtd_info [MTD] [NOR] Intel: remove ugly PROGREGION macros [MTD] [NOR] STAA: use writesize instead off eccsize to represent ECC block [MTD] OneNAND: Invalidate bufferRAM after erase ...
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-26 14:46:34 -0500