aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
...
| * [media] rc/imon: default to key mode instead of mouse modeJarod Wilson2011-01-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | My initial thinking was that we should default to mouse mode, so people could use the mouse function to click on something on a login screen, but a lot of systems where a remote is useful automatically log in a user and launch a media center application, some of which hide the mouse, which can be confusing to users if they punch buttons on the remote and don't see any feedback. Plus, first and foremost, its a remote, so lets default to being a remote, and only toggle into mouse mode when the user explicitly asks for it. As a nice side-effect, this actually simplifies some of the code a fair bit... Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] rc: fix up and genericize some time unit conversionsJarod Wilson2011-01-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ene_ir driver was using a private define of MS_TO_NS, which is meant to be microseconds to nanoseconds. The mceusb driver copied it, intending to use is a milliseconds to microseconds. Lets move the defines to a common location, expand and standardize them a touch, so that we now have: MS_TO_NS - milliseconds to nanoseconds MS_TO_US - milliseconds to microseconds US_TO_NS - microseconds to nanoseconds Reported-by: David Härdeman <david@hardeman.nu> CC: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] rc/imon: need to submit urb before ffdc type checkJarod Wilson2011-01-19
| | | | | | | | | | | | | | | | Otherwise, we have a null receive buffer, and the logic all falls down, goes boom, all ffdc devs wind up as imon IR w/VFD. Oops. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] rc/ene_ir: fix oops on module loadKyle McMartin2011-01-19
| | | | | | | | | | | | | | | | | | | | | | | | | | dev->rdev is accessed in ene_setup_hw_settings, so it needs to be wired up before then. [Jarod Wilson]: Also fix a possible improper resource freeing bug while we're looking at possible probe issues here. Signed-off-by: Kyle McMartin <kmcmartin@redhat.com> CC: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] rc/imon: fix ffdc device detection oopsJarod Wilson2011-01-19
| | | | | | | | | | | | | | | | | | | | | | | | There's a nasty bug that slipped in when the rc device interface was altered, only affecting the older 0xffdc imon devices. We were trying to access ictx->rdev->allowed_protos before ictx->rdev had been set. There's also an issue with call ordering that meant the correct keymap wasn't getting loaded for MCE IR type 0xffdc devices. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] DVB: cx231xx drivers does not use dummy frontend anymoreThadeu Lima de Souza Cascardo2011-01-19
| | | | | | | | | | Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] V4L2: WL1273 FM Radio: Replace ioctl with unlocked_ioctlMatti Aaltonen2011-01-19
| | | | | | | | | | | | | | | | Use unlocked_ioctl in v4l2_file_operations. The locking is already in place. Signed-off-by: Matti J. Aaltonen <matti.j.aaltonen@nokia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] v4l/cx18: update workqueue usageTejun Heo2011-01-19
| | | | | | | | | | | | | | | | | | | | | | | | | | With cmwq, there's no reason to use separate out_work_queue. Drop it and use system_wq instead. The in_work_queue needs to be ordered so can't use one of the system wqs; however, as it isn't used to reclaim memory, allocate the workqueue with alloc_ordered_workqueue() without WQ_MEM_RECLAIM. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Andy Walls <awalls@md.metrocast.net> Acked-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] media, tlg2300: Fix memory leak in alloc_bulk_urbs_generic()Jesper Juhl2011-01-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hi, While reading drivers/media/video/tlg2300/pd-video.c::alloc_bulk_urbs_generic() I noticed that - We don't free the memory allocated to 'urb' if the call to usb_alloc_coherent() fails. - If the 'num' argument to the function is ever <= 0 we'll return an uninitialized variable 'i' to the caller. The following patch addresses both of the above by a) calling usb_free_urb() when usb_alloc_coherent() fails and by explicitly initializing 'i' to zero. I also moved the variables 'mem' and 'urb' inside the for loop. This does not actually make any difference, it just seemed more correct to me to let variables exist only in the innermost scope they are used. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] frontends/ix2505v: Remember to free allocated memory in failure pathJesper Juhl2011-01-19
| | | | | | | | | | | | | | | | | | | | | | We may leak the storage allocated to 'state' in drivers/media/dvb/frontends/ix2505v.c::ix2505v_attach() on error, as it is too early to be able to call ix2505v_release(). This patch makes sure we free the allocated memory in the failure case. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] gspca - sonixj: Add LED (illuminator) control to the webcam 0c45:614aJean-François Moine2011-01-19
| | | | | | | | | | Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] gspca - sonixj: Infrared bug fix and enhancementJean-François Moine2011-01-19
| | | | | | | | | | | | | | | | | | | | The infrared was set by sensor write instead of bridge GPIO. It is now settable by the standard control ILLUMINATOR_1. A module parameter permits to set the right GPIO bit according to the StarCam model. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] gspca - ov534: Propagate errors to higher levelJean-François Moine2011-01-19
| | | | | | | | | | Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] gspca - ov534: Clearer debug messagesJean-François Moine2011-01-19
| | | | | | | | | | Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] gspca - ov519: Cleanup source and add a commentJean-François Moine2011-01-19
| | | | | | | | | | Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] gspca: Remove useless instructionsJean-François Moine2011-01-19
| | | | | | | | | | Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] gspca: Remove __devinit, __devinitconst and __devinitdataJean-François Moine2011-01-19
| | | | | | | | | | | | | | __devinit* must not be used in USB drivers. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] gspca: Version changeJean-François Moine2011-01-19
| | | | | | | | | | Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] v4l2-ctrls: v4l2_ctrl_handler_setup must set is_new to 1Hans Verkuil2011-01-19
| | | | | | | | | | | | | | | | | | | | | | | | Renamed has_new to is_new. Drivers can use the is_new field to determine if a new value was specified for a control. The v4l2_ctrl_handler_setup() must always set this to 1 since the setup has to force a full update of all controls. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] v4l2-subdev: add (un)register internal opsHans Verkuil2011-01-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some subdevs need to call into the board code after they are registered and have a valid struct v4l2_device pointer. The s_config op was abused for this, but now that it is removed we need a cleaner way of solving this. So this patch adds a struct with internal ops that the v4l2 core can call. Currently only two ops exist: register and unregister. Subdevs can implement these to call the board code and pass it the v4l2_device pointer, which the board code can then use to get access to the struct that embeds the v4l2_device. It is expected that in the future open and close ops will also be added. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] v4l2-subdev: remove core.s_config and v4l2_i2c_new_subdev_cfg()Hans Verkuil2011-01-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The core.s_config op was meant for legacy drivers that needed to work with old pre-2.6.26 kernels. This is no longer relevant. Unfortunately, this op was incorrectly called from several drivers. Replace those occurences with proper i2c_board_info structs and call v4l2_i2c_new_subdev_board. After these changes v4l2_i2c_new_subdev_cfg() was no longer used, so remove that function as well. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] saa7134: Kworld SBTVD: make both analog and digital to workMauro Carvalho Chehab2011-01-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are some weird bugs at tda8290/tda18271 initialization, as it insits do do analog initialization during DVB frontend attach: DVB: registering new adapter (saa7133[0]) DVB: registering adapter 0 frontend 0 (Fujitsu mb86A20s)... mb86a20s: mb86a20s_initfe tda18271_write_regs: [2-0060|M] ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 tda18271_init: [2-0060|M] error -5 on line 830 tda18271_tune: [2-0060|M] error -5 on line 908 tda18271_write_regs tda18271_write_regs: [2-0060|M] ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 tda18271c2_rf_tracking_filters_correction: [2-0060|M] error -5 on line 265 tda18271_write_regs tda18271_write_regs: [2-0060|M] ERROR: idx = 0x25, len = 1, i2c_transfer returned: -5 tda18271_channel_configuration: [2-0060|M] error -5 on line 119 tda18271_set_analog_params: [2-0060|M] error -5 on line 1045 tda18271_set_analog_params: [2-0060|M] error -5 on line 1045 tda829x 2-004b: tda8295 not locked, no signal? tda829x 2-004b: tda8295_i2c_bridge: disable i2c gate tda829x 2-004b: tda8295 not locked, no signal? tda829x 2-004b: tda8295_i2c_bridge: disable i2c gate mb86a20s_i2c_writereg: writereg error (rc == -5, reg == 0x29, data == 0x33) mb86a20s: Init failed. Will try again later The problem is that mb86a20s is only visible if the analog part is disabled. However, due to a trick at mb86a20s, it will later initialize properly: mb86a20s: mb86a20s_initfe: Initialization succeded. This is hacky and ugly. However, I coldn't find any easy way to fix it. A proper fix would be to have a resource locking schema, used by both V4L and DVB parts that would block access to analog registers while digital registers are in use, but this will probably put tda829x into a dead lock. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] saa7134: Fix digital mode on Kworld SBTVDMauro Carvalho Chehab2011-01-19
| | | | | | | | | | | | | | This patch fixes digital mode on Kworld SBTVD. Unfortunately, it disables analog mode. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] saa7134: Fix analog mode for Kworld SBTVDMauro Carvalho Chehab2011-01-19
| | | | | | | | | | | | | | | | There were some issues at tda8290 that were preventing this device to work. Now that those fixes were fixed, we can enable analog mode. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] mb86a20s: Be sure that device is initialized before starting DVBMauro Carvalho Chehab2011-01-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to a hard to track bug between tda829x/tda18271/saa7134, tda829x wants to go to analog mode during DVB initialization, causing some I2C errors. The analog failure doesn't cause any harm, as the device were already properly initialized in analog mode. However, the failure at the digital mode causes the frontend mb86a20s to not initialize. Fortunately, at least on my tests, it was possible to detect that the device is a mb86a20s before the failure. What happens is that tda8290 is a very bad boy: during DVB setup, it keeps insisting to call tda18271 analog_set_params, that calls tune_agc code. The tune_agc code calls saa7134 driver, changing the value of GPIO 27, switching from digital to analog mode and disabling the access to mb86a20s, as, on Kworld SBTVD, the same GPIO used to switch the hardware AGC mode seems to be used to enable the I2C switch that allows access to the frontend (mb86a20s). So, a call to analog_set_params ultimately disables the access to the frontend, and causes a failure at the init frontend logic. This patch is a workaround for this issue: it simply checks if the frontend init had any failure. If so, it will init the frontend when some DTV application will try to set DVB mode. Even being a hack for Kworld SBTVD to work, and assumning that we could teach tda8290 to be a good boy, this is actually an improvement at the frontend driver, as it will be more reliable to initialization failures. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] mb86a20s: Fix i2c read/write error messagesMauro Carvalho Chehab2011-01-19
| | | | | | | | | | | | | | A script replaced err var to rc. Howerver, this script gambled "error" string, changing it to "rcor". Revert that bad change. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] tda8290: Turn tda829x on before touching at the I2C gateMauro Carvalho Chehab2011-01-19
| | | | | | | | | | | | | | | | On Kworld SBTVD, tda8295-c1 starts in power off mode. It needs to be powered, otherwise, the I2C gate control command won't work. Cc: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] tda8290: Fix a bug if no tuner is detectedMauro Carvalho Chehab2011-01-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If tda8290 is detected, but no tuner is found, the driver will do bad things: tuner 2-0060: chip found @ 0xc0 (saa7133[0]) tda829x 2-0060: could not clearly identify tuner address, defaulting to 60 tda829x 2-0060: tuner access failed! BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 IP: [<ffffffffa048c267>] set_audio+0x47/0x170 [tda8290] PGD 1187b0067 PUD 11771e067 PMD 0 Oops: 0002 [#1] SMP last sysfs file: /sys/module/i2c_core/initstate CPU 0 Modules linked in: tda8290(U) tea5767(U) tuner(U) ir_lirc_codec(U) lirc_dev(U) ir_sony_decoder(U) ir_jvc_decoder(U) ir_rc6_decoder(U) ir_rc5_decoder(U) saa7134(+)(U) v4l2_common(U) ir_nec_decoder(U) videodev(U) v4l2_compat_ioctl32(U) rc_core(U) videobuf_dma_sg(U) videobuf_core(U) tveeprom(U) ebtable_nat ebtables xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT bridge stp llc autofs4 sunrpc cpufreq_ondemand acpi_cpufreq freq_table xt_physdev iptable_filter ip_tables ip6t_REJECT ip6table_filter ip6_tables ipv6 dm_mirror dm_region_hash dm_log parport kvm_intel kvm uinput floppy tpm_infineon wmi sg serio_raw iTCO_wdt iTCO_vendor_support tg3 snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore snd_page_alloc i7core_edac edac_core nouveau Modules linked in: tda8290(U) tea5767(U) tuner(U) ir_lirc_codec(U) lirc_dev(U) ir_sony_decoder(U) ir_jvc_decoder(U) ir_rc6_decoder(U) ir_rc5_decoder(U) saa7134(+)(U) v4l2_common(U) ir_nec_decoder(U) videodev(U) v4l2_compat_ioctl32(U) rc_core(U) videobuf_dma_sg(U) videobuf_core(U) tveeprom(U) ebtable_nat ebtables xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT bridge stp llc autofs4 sunrpc cpufreq_ondemand acpi_cpufreq freq_table xt_physdev iptable_filter ip_tables ip6t_REJECT ip6table_filter ip6_tables ipv6 dm_mirror dm_region_hash dm_log parport kvm_intel kvm uinput floppy tpm_infineon wmi sg serio_raw iTCO_wdt iTCO_vendor_support tg3 snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore snd_page_alloc i7core_edac edac_core nouveau ttm drm_kms_helper drm i2c_algo_bit video output i2c_core ext3 jbd mbcache firewire_ohci firewire_core crc_itu_t sr_mod cdrom sd_mod crc_t10dif ahci dm_mod [last unloaded: microcode] Pid: 9497, comm: modprobe Not tainted 2.6.32-72.el6.x86_64 #1 HP Z400 Workstation RIP: 0010:[<ffffffffa048c267>] [<ffffffffa048c267>] set_audio+0x47/0x170 [tda8290] RSP: 0018:ffff88010ba01b28 EFLAGS: 00010206 RAX: 00000000000000ff RBX: ffff880119522800 RCX: 0000000000000002 RDX: 0000000000003be0 RSI: ffff88010ba01bb8 RDI: 0000000000000000 RBP: ffff88010ba01b28 R08: 0000000000000002 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff88010ba01bb8 R14: 0000000000001900 R15: 0000000000001900 FS: 00007f4b96b3d700(0000) GS:ffff880028200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000020 CR3: 000000011866c000 CR4: 00000000000026f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process modprobe (pid: 9497, threadinfo ffff88010ba00000, task ffff880100708a70) Stack: ffff88010ba01b98 ffffffffa048c95b ffff88010ba01b78 0000000000000060 <0> 0000000000000000 0000000e00000000 000000000000001d ffffffffa03ec838 <0> ffff88010abac240 ffff880119522800 ffff880119522800 ffff880119522bc0 Call Trace: [<ffffffffa048c95b>] tda8295_set_params+0x3b/0x210 [tda8290] [<ffffffffa03ec838>] ? v4l2_i2c_new_subdev_cfg+0x88/0xc0 [v4l2_common] [<ffffffffa0484418>] set_freq+0x128/0x2f0 [tuner] [<ffffffffa0486464>] tuner_s_std+0xc4/0x740 [tuner] [<ffffffffa04b9ae6>] saa7134_set_tvnorm_hw+0x2d6/0x3d0 [saa7134] [<ffffffffa04ba455>] set_tvnorm+0xd5/0x100 [saa7134] [<ffffffffa04bc9fd>] saa7134_video_init2+0x1d/0x50 [saa7134] [<ffffffffa04bf57e>] saa7134_initdev+0x6e1/0xb1d [saa7134] [<ffffffff8125afea>] ? kobject_get+0x1a/0x30 [<ffffffff812765f7>] local_pci_probe+0x17/0x20 [<ffffffff812777e1>] pci_device_probe+0x101/0x120 [<ffffffff8132ec72>] ? driver_sysfs_add+0x62/0x90 [<ffffffff8132ee10>] driver_probe_device+0xa0/0x2a0 [<ffffffff8132f0bb>] __driver_attach+0xab/0xb0 [<ffffffff8132f010>] ? __driver_attach+0x0/0xb0 [<ffffffff8132e074>] bus_for_each_dev+0x64/0x90 [<ffffffff8132ebae>] driver_attach+0x1e/0x20 [<ffffffff8132e4b0>] bus_add_driver+0x200/0x300 [<ffffffff8132f3e6>] driver_register+0x76/0x140 [<ffffffff814c7c43>] ? printk+0x41/0x46 [<ffffffff81277a46>] __pci_register_driver+0x56/0xd0 [<ffffffffa04de000>] ? saa7134_init+0x0/0x4f [saa7134] [<ffffffffa04de04d>] saa7134_init+0x4d/0x4f [saa7134] [<ffffffff8100a04c>] do_one_initcall+0x3c/0x1d0 [<ffffffff810af5ef>] sys_init_module+0xdf/0x250 [<ffffffff81013172>] system_call_fastpath+0x16/0x1b Code: 20 01 49 c7 c0 c9 ec 48 a0 83 7e 04 01 74 2d 8b 0d 3f 2f 00 00 85 c9 0f 85 d7 00 00 00 c9 c3 0f 1f 44 00 00 a9 03 00 01 00 74 61 <c6> 47 20 02 83 7e 04 01 49 c7 c0 cc ec 48 a0 75 d3 0f b6 47 22 RIP [<ffffffffa048c267>] set_audio+0x47/0x170 [tda8290] RSP <ffff88010ba01b28> CR2: 0000000000000020 This happens because some I2C callbacks actually depend on having the driver entirely initialized. To avoid this OOPS, just clean the I2C callbacks, as if no device were detected. Cc: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] tda8290: Make all read operations atomicMauro Carvalho Chehab2011-01-19
| | | | | | | | | | | | | | | | | | | | | | | | Read operations should be preceeded by a write operation. However, nothing prevents that an I2C operation could happen between the two transactions. To avoid that problem, use an unique I2C transfer for both parts of the I2C transaction. Cc: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] em28xx: Fix IR support for WinTV USB2Mauro Carvalho Chehab2011-01-19
| | | | | | | | | | | | | | Due to a lack of a break inside the switch, it were getting the wrong keytable and get_key function. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] ir-kbd-i2c: Make IR debug messages more usefulMauro Carvalho Chehab2011-01-19
| | | | | | | | Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] dib0700: Fix IR keycode handlingMauro Carvalho Chehab2011-01-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes Fedora 14 bug: https://bugzilla.redhat.com/show_bug.cgi?id=667157 There are a few bugs at the code that generates the scancode at dib0700: - RC keycode is wrong (it outputs a 24 bits keycode); - NEC extended outputs a keycode that have endiannes issues; - keycode tables for NEC extended remotes need to be updated. The last issue need to be done as we get reports, as we don't have the complete NEC-extended keycodes at the dibcom table. This patch fixes the first two issues. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] rc-dib0700-nec: Fix keytable for Pixelview SBTVDMauro Carvalho Chehab2011-01-19
| | | | | | | | | | | | dib0700 now outputs NEC extended keycodes. Fix the keytable to reflect that. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] radio-si470x: Always report support for RDSTobias Lorenz2011-01-19
| | | | | | | | | | | | | | | | | | | | The si470x i2c and usb driver support the RDS, so this ifdef statement doesn't need more. [mchehab@redhat.com: Fix a conflict on it] Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Acked-by: Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] radio-si470x: de-emphasis should be set if requested by module parameterTobias Lorenz2011-01-19
| | | | | | | | | | | | | | | | | | instead of always setting de-emphasis. Reported-by: Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Acked-by: Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] v4l2-ioctl: fix incorrect error code if VIDIOC_DBG_G/S_REGISTER are ↵Hans Verkuil2011-01-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | unsupported The ioctls VIDIOC_DBG_S_REGISTER and VIDIOC_DBG_G_REGISTER should return -EINVAL if the driver didn't implement them. Currently they return -EPERM if called as non-root user. However, this check should only be done if the driver actually implemented these ioctls. Otherwise, just return -EINVAL as we do with all unimplemented ioctls. This bug make the v4l2-compliance test suite fail. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] gspca_sonixb: Fix mirrored image with ov7630Hans de Goede2011-01-19
| | | | | | | | | | Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] gspca_sonixj: Add one more commented out usb-idHans de Goede2011-01-19
| | | | | | | | | | | | | | | | | | While going through windows inf file I found more usb-id, add a comment with this id for future reference. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] gspca_sonixj: Probe sensor type independent of bridge typeHans de Goede2011-01-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Looking at the windows inf file, for usb ids with a sensor type where probing is needed to determine the type (for example ov7630 or soi768), this is needed for all bridge variants with a usb id indicating this sensor type. So do the probing to determine the actual sensor type for types where the usb-id info is not 100% deterministic, independent of the bridge type. If you look through the list of currently active usb ids in sonixj, this effectively only changes the code path for 0c45:60fe (sn9c105 + ov7630) and 0c45:612e (sn9c110 + ov7630), which according to the inf file can have a soi768 instead of a ov7630 just like the sn9c120 + ov7630 models where we already probe for a soi7630. The main reason for this code change is to keep the code paths as bridge variant independent as possible, so that we don't need a lot of special per bridge cases, as we enable more usb-ids in the future. This change makes the 0c45:60fe code path identical to the successfully tested 0c45:613e, so also make sonixj the default driver for 0c45:60fe. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] gspca_sonixj: Enable more usb ids when sn9c102 gets compiled tooHans de Goede2011-01-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Both we and the windows driver make no sensor specific differences (with some exceptions) for different sonixj bridge types. Thus if a sn9c105 bridge has been successfully tested with a sensor, the same sensor can be successfully used with a sn9c120 bridge too. Using this knowledge we can move over most usb-ids too the sonixj driver when both are compiled. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] gspca_sonixb: Add usb ids for known sn9c103 camerasHans de Goede2011-01-19
| | | | | | | | | | | | | | | | | | | | Now that our bridge code is unified for sn9c101/102 and sn9c103 models, the sn9c103 models should simply work, given that the only difference in the sn9c103 is audio support and a gamma correction table. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] gspca_sonixb: TAS5130C brightness control really is a gain controlHans de Goede2011-01-19
| | | | | | | | | | | | Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] gspca_sonixb: Fix TAS5110D sensor gain controlHans de Goede2011-01-19
| | | | | | | | | | | | | | | | Also fix the issue of the image being mirrored. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] gspca_sonixb: Adjust autoexposure window for vga cams so that it is ↵Hans de Goede2011-01-19
| | | | | | | | | | | | | | | | centered Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] gspca_sonixb: Refactor to unify bridge handlingHans de Goede2011-01-19
| | | | | | | | | | | | | | | | | | | | Refactor the code to unify how the sn9c101/102 and the sn9c103 bridge are handled. Also move code which is the same for all sensors from the per sensor init register settings to a central place. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] sn9c102: Remove not supported and non existing usb idsHans de Goede2011-01-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The sn9c102 driver claims a number of usb-ids which are for cameras with sensor types which it does not support. Also it claims a number of usb-ids which do not exist at all (not present in the windows drivers .inf files, not known by google). This patch also fixes the conflict with the gspca_sonixj driver for the 0c45:60c0 and 0c45:60fb usb ids. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] et61x251: remove wrongly claimed usb idsHans de Goede2011-01-19
| | | | | | | | | | | | | | | | | | | | | | The et61x251 driver claims a whole list of usb id's, but it only has one sensor "module" which does sensor detection based on usb id and that only supports devices with the 102c:6251 usb id. Remove the usb-ids for other devices as for those the driver will fail with an unable to determine sensor type message anyways. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] gspca_main: wake wq on streamoffHans de Goede2011-01-19
| | | | | | | | | | | | | | | | | | We check for not streaming as a condition to abort waiting in dqbuf, so when another thread does a streamoff we should wake the wq. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] gspca_main: Allow switching from read to mmap / userptr modeHans de Goede2011-01-19
| | | | | | | | | | | | | | | | | | Some applications (xawtv, qv4l2) mix read and mmap calls. Allow switching from read mode back to mmap mode (by doing a reqbufs). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * [media] gspca_main: Simplify read mode memory type checksHans de Goede2011-01-19
| | | | | | | | | | | | | | | | | | | | | | | | gspca_dev->memory == GSPCA_MEMORY_NO implies gspca_dev->nframes == 0, so there is no need to check for both in dev_poll. The check in dev_read also is more complex then needed, as dqbuf which dev_read calls already does all necessary checks. Moreover dqbuf is holding the proper locks while checking where as dev_read itself is not. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-22 05:50:41 -0500