aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
...
* OMAP: DSS2: DSI: Improve dsi_mux_pads parametersTomi Valkeinen2011-09-30
| | | | | | | | dsi_mux_pads() needs to know about the DSI HW module and the DSI lanes used. Split the function into two, enable and disable, which take necessary arguments, and add empty implementations for both. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* OMAP4: TWL: Add common omapdss suppliesTomi Valkeinen2011-09-30
| | | | | | | | | | | | OMAP DSS normally gets power from VCXIO on OMAP4. Add configuration for this into twl-common.c Mark VCXIO as always_on, as VCXIO is used by multiple components, including the MPU, and turning it off when DSS doesn't need it would lead the device to halt. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* OMAP: DSS2: Change DSI device namingTomi Valkeinen2011-09-30
| | | | | | | | | | | | | Currently, there are 2 differently named platform devices generated for the 2 DSS DSI modules. In order to use the same driver, the dsi devices should be 2 instances of the same platform device. Change the platform device names from "omapdss_dsi1" and "omapdss_dsi2" to omapdss_dsi", and set the device indices to 0 and 1. Signed-off-by: Archit Taneja <archit@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* OMAP: DSS2: remove unneeded fck enable/disablesTomi Valkeinen2011-09-20
| | | | | | | | | | | | | | Now that the HWMOD fmwk handles the fcks of DSS modules properly, the DSS driver no longer needs to explicitely enable/disable the fck. This patch removes the enables/disables of fck from dispc, dsi and dss. The clk_get(fck) is still needed there, as the modules need to know the frequency of the clock. For hdmi and venc this patch also removes the clk_get(fck), as they don't need the clock at all. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* Revert "OMAP: DSS2: HDMI: fix hdmi clock name"Tomi Valkeinen2011-09-20
| | | | | | | | This reverts commit df5d3ed23cf73ee0763a8963003bda9b69d9620f. The HDMI clock name has been fixed in HWMOD data. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* Revert "HACK: OMAP: DSS2: clk hack for OMAP2/3"Tomi Valkeinen2011-09-20
| | | | | | | | This reverts commit 9ede365aa6f74428a1f69c21ca1cf21213167576. The hack is no longer needed, as the HWMOD data has been fixed. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* OMAP: DSS2: Use a macro to declare size of the fifo_size array in dispc.cArchit Taneja2011-09-14
| | | | | | | | | | The array size of fifo_size array in the global dispc struct is currently hardcoded to 3. Replace this with the MAX_DSS_OVERLAYS macro in dss_features.h, use dss_features function to get the number of overlays instead of the ARRAY_SIZE macro in dispc_read_plane_fifo_sizes(). Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* OMAP: DSS2: DISPC: Shorten _dispc_set_color_conv_coef()Archit Taneja2011-09-14
| | | | | | | Iterate over overlay id's to shorten _dispc_set_color_conv_coef() Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* OMAP: DSS2: DISPC: dispc_save_context() and dispc_restore_context() cleanupArchit Taneja2011-09-14
| | | | | | | | Iterate over manager and overlay id's to shorten dispc_save_context() and dispc_restore_context(). Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* OMAP: DSS2: DISPC: Shorten dispc_dump_regs()Archit Taneja2011-09-14
| | | | | | | Iterate over manager and overlay id's to shorten dispc_dump_regs(). Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* OMAP: DSS2: DISPC: Prepare dispc_dump_regs() for shorteningArchit Taneja2011-09-14
| | | | | | | | | | | | | | | | Prepare dispc_dump_regs() to iterate over manager and overlay id's. Doing this requires modifications of the macro "DUMPREG" which currently needs us to specify the manager/overlay name to get the correct result. For example, in order to print the register DISPC_TIMING_H(OMAP_DSS_CHANNEL_LCD), we can't iterate over a varaible i and get the desired result through DUMPREG(DISPC_TIMING_H(i)). Split the registers into 3 sections, the first with no arguments(common registers), the second with one argument(manager/overlay id), and the third with two arguments(overlay id and coefficient index), redefine DUMPREG macros for each of these. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* OMAPFB: make debug message more usefulAndy Doan2011-09-14
| | | | | | | | Make the debug message useful by printing the name of the device that no associated driver could be found for. Signed-off-by: Andy Doan <andy.doan@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* OMAP: DSS: dispc: enable/disable clocks in error handlerDima Zavin2011-09-14
| | | | | | | | | There's no guarantee that the error handler worker thread will run while the dispc clocks are on. Explicitly enable/disable them. Signed-off-by: Dima Zavin <dima@android.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* OMAP: DSS2: Don't allow moving managers away from enabled displaysDaniel Morsing2011-09-14
| | | | | | | | | | | | If a manager is moved while attached to an enabled display, the DSS system will be left in an inconsistent state. This will eventually cause a kernel oops when the enabled display is disabled. Fix this by not allowing the user to move a manager away from an enabled display. Signed-off-by: Daniel Morsing <daniel.morsing@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* OMAP: DSS2: check for manager when enabling displayTomi Valkeinen2011-09-14
| | | | | | | | | | None of the DSS interface drivers check if an overlay manager is connected to the display when the display is being enabled. This leads to null pointer crash if the display has no manager. This patch checks for the manager and returns an error if it is null. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* OMAP: DSS2: PicoDLP: fix error handling in power_onTomi Valkeinen2011-09-14
| | | | | | | | | | | | Fix two problems in PicoDLP driver's error handling on picodlp_panel_power_on: - If omapdss_dpi_display_enable() failed, the its error value was not returned - If picodlp_i2c_init() failed, dssdev->state was erroneously set to OMAP_DSS_DISPLAY_ACTIVE Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* OMAP: DSS2: Add picodlp panel driverMayuresh Janorkar2011-09-14
| | | | | | | | | | | | | | | | | | | | | PicoDLP is a micro projector from TI. DLP used in OMAP4 is dpp2600 (DLP Pico Projector) The DLP requires commands to be sent over i2c for configurations. To know more about dpp2600 commands please visit: https://focus.ti.com/myti/docs/extranet.tsp?sectionId=403 The picodlp module consists of a dss driver and an i2c_client. To know more please visit: http://www.omappedia.org/wiki/PicoDLP_projector_guide Based on original design from Mythri P K <mythripk@ti.com> Signed-off-by: Mayuresh Janorkar <mayur@ti.com> Signed-off-by: Mythri P K <mythripk@ti.com> [tomi.valkeinen@ti.com: squashed commits] Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* Linux 3.1-rc6Linus Torvalds2011-09-12
|
* Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds2011-09-12
|\ | | | | | | | | | | | | | | | | | | | | * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm: Remove duplicate "return" statement drm/nv04/crtc: Bail out if FB is not bound to crtc drm/nouveau: fix nv04_sgdma_bind on non-"4kB pages" archs drm/nouveau: properly handle allocation failure in nouveau_sgdma_populate drm/nouveau: fix oops on pre-semaphore hardware drm/nv50/crtc: Bail out if FB is not bound to crtc drm/radeon/kms: fix DP detect and EDID fetch for DP bridges
| * drm: Remove duplicate "return" statementLin Ming2011-09-09
| | | | | | | | | | | | | | Remove the duplicate "return" statement in drm_fb_helper_panic(). Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
| * Merge branch 'drm-nouveau-fixes' of ↵Dave Airlie2011-09-09
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-test * 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nv04/crtc: Bail out if FB is not bound to crtc drm/nouveau: fix nv04_sgdma_bind on non-"4kB pages" archs drm/nouveau: properly handle allocation failure in nouveau_sgdma_populate drm/nouveau: fix oops on pre-semaphore hardware drm/nv50/crtc: Bail out if FB is not bound to crtc
| | * drm/nv04/crtc: Bail out if FB is not bound to crtcEmil Velikov2011-09-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit resolves a possible 'NULL pointer dereference' It uses the same approach as radeon, intel and nouveau/nv50 Fixes bug 'Nouveau: Kernel oops when unplugging external monitor' https://bugs.freedesktop.org/show_bug.cgi?id=40336 Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
| | * drm/nouveau: fix nv04_sgdma_bind on non-"4kB pages" archsMarcin Slusarz2011-09-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | nv04_sgdma_bind binds the same page multiple times on architectures where PAGE_SIZE != 4096. Let's fix it. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
| | * drm/nouveau: properly handle allocation failure in nouveau_sgdma_populateMarcin Slusarz2011-09-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Not cleaning after alloc failure would result in crash on destroy, because nouveau_sgdma_clear assumes "ttm_alloced" to be not null when "pages" is not null. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: stable@kernel.org Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
| | * drm/nouveau: fix oops on pre-semaphore hardwareBen Skeggs2011-09-09
| | | | | | | | | | | | Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
| | * drm/nv50/crtc: Bail out if FB is not bound to crtcEmil Velikov2011-09-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes possbile NULL pointer dereference Resolves 'kernel crash in nv50_crtc_do_mode_set_base during shutdown' https://bugs.freedesktop.org/show_bug.cgi?id=40005 Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
| * | drm/radeon/kms: fix DP detect and EDID fetch for DP bridgesAlex Deucher2011-09-06
| |/ | | | | | | | | | | | | | | Sink type is always DP for DP bridges and EDID fetch on DP bridges is always i2c over aux rather than plain i2c. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | Merge branch 'fixes' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds2011-09-12
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'fixes' of git://git.linaro.org/people/arnd/arm-soc: ARM: CSR: add missing sentinels to of_device_id tables ARM: cns3xxx: Fix newly introduced warnings in the PCIe code ARM: cns3xxx: Fix compile error caused by hardware.h removed ARM: davinci: fix cache flush build error ARM: davinci: correct MDSTAT_STATE_MASK ARM: davinci: da850 EVM: read mac address from SPI flash OMAP: omap_device: fix !CONFIG_SUSPEND case in _noirq handlers OMAP2430: hwmod: musb: add missing terminator to omap2430_usbhsotg_addrs[] OMAP3: clock: indicate that gpt12_fck and wdt1_fck are in the WKUP clockdomain OMAP4: clock: fix compile warning OMAP4: clock: re-enable previous clockdomain enable/disable sequence OMAP: clockdomain: Wait for powerdomain to be ON when using clockdomain force wakeup OMAP: powerdomains: Make all powerdomain target states as ON at init
| * \ Merge branch 'for_3.1/pm-fixes-2' of ↵Arnd Bergmann2011-09-12
| |\ \ | | | | | | | | | | | | git://gitorious.org/khilman/linux-omap-pm into fixes
| | * | OMAP: omap_device: fix !CONFIG_SUSPEND case in _noirq handlersKevin Hilman2011-09-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The suspend/resume _noirq handlers were #ifdef'd out in the !CONFIG_SUSPEND case, but were still assigned to the dev_pm_ops struct. Fix by defining them to NULL in the !CONFIG_SUSPEND case. Reported-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kevin Hilman <khilman@ti.com>
| * | | Merge branch 'sirf/fixes' into fixesArnd Bergmann2011-09-12
| |\ \ \
| | * | | ARM: CSR: add missing sentinels to of_device_id tablesJamie Iles2011-09-10
| | | |/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | The of_device_id tables used for matching should be terminated with empty sentinel values. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Barry Song <baohua.song@csr.com>
| | | |
| | \ \
| *-. \ \ Merge branches 'cns3xxx/fixes', 'omap/fixes' and 'davinci/fixes' into fixesArnd Bergmann2011-09-10
| |\ \ \ \
| | | * | | ARM: davinci: fix cache flush build errorLinus Walleij2011-09-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The TNET variant of DaVinci compiles some code that it shares with other DaVinci variants, however it has a V6 CPU rather than an ARM926T, thus the hardcoded call to arm926_flush_kern_cache_all() in sleep.S will obviously fail, and we need to build with the v6_flush_kern_cache_all() call instead. This was triggered by manually altering the DaVinci config to build the TNET version. Cc: Dave Martin <dave.martin@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Cc: stable@kernel.org
| | | * | | ARM: davinci: correct MDSTAT_STATE_MASKSergei Shtylyov2011-09-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MDSTAT.STATE occupies bits 0..5 according to all available documentation, so fix the #define MDSTAT_STATE_MASK at last. Using the wrong value seems to have been harmless though... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
| | | * | | ARM: davinci: da850 EVM: read mac address from SPI flashRajashekhara, Sudhakar2011-09-07
| | | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DA850/OMAP-L138 EMAC driver uses random mac address instead of a fixed one because the mac address is not stuffed into EMAC platform data. This patch provides a function which reads the mac address stored in SPI flash (registered as MTD device) and populates the EMAC platform data. The function which reads the mac address is registered as a callback which gets called upon addition of MTD device. NOTE: In case the MAC address stored in SPI flash is erased, follow the instructions at [1] to restore it. [1] http://processors.wiki.ti.com/index.php/GSG:_OMAP-L138_DVEVM_Additional_Procedures#Restoring_MAC_address_on_SPI_Flash Modifications in v2: Guarded registering the mtd_notifier only when MTD is enabled. Earlier this was handled using mtd_has_partitions() call, but this has been removed in Linux v3.0. Modifications in v3: a. Guarded da850_evm_m25p80_notify_add() function and da850evm_spi_notifier structure with CONFIG_MTD macros. b. Renamed da850_evm_register_mtd_user() function to da850_evm_setup_mac_addr() and removed the struct mtd_notifier argument to this function. c. Passed the da850evm_spi_notifier structure to register_mtd_user() function. Modifications in v4: Moved the da850_evm_setup_mac_addr() function within the first CONFIG_MTD ifdef construct. Signed-off-by: Rajashekhara, Sudhakar <sudhakar.raj@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Cc: stable@kernel.org
| | | | |
| | | \ \
| | | \ \
| | | \ \
| | | \ \
| | | \ \
| | *-----. \ \ Merge branches 'non_hwmod_compliant_fix_3.1rc', 'omap3_clock_fixes_3.1rc', ↵Paul Walmsley2011-09-04
| | |\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | 'omap4_clock_fixes_3.1rc', 'missing_2430_musb_adds_terminator_fix_3.1rc' and 'pwrdm_clkdm_fixes_3.1rc' into prcm-fixes-a-3.1rc
| | | | | | * | | OMAP: clockdomain: Wait for powerdomain to be ON when using clockdomain ↵Santosh Shilimkar2011-08-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | force wakeup While using clockdomain force wakeup method, not waiting for powerdomain to be effectively ON may end up locking the clockdomain FSM until a next wakeup event occurs. One such issue was seen on OMAP4430, where L4_PER was periodically getting stuck in in-transition state when transitioning from from OSWR to ON. This issue was reported and investigated by Patrick Titiano <p-titiano@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Reported-by: Patrick Titiano <p-titiano@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> [paul@pwsan.com: updated to apply; added transition wait on clkdm_deny_idle(); remove two superfluous pwrdm_wait_transition() calls] Signed-off-by: Paul Walmsley <paul@pwsan.com>
| | | | | | * | | OMAP: powerdomains: Make all powerdomain target states as ON at initRajendra Nayak2011-08-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Program all powerdomain target state as ON; this is to prevent domains from hitting low power states (if bootloader has target states set to something other than ON) and potentially even losing context while PM is not fully initialized, which can cause the system to crash. The PM late init code can then program the desired target state for all the power domains. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> [paul@pwsan.com: dropped comment typo hunk; fixed comment indent and moved to kerneldoc; moved code to pwrdm_init(); changed pwrdm_init() argument name to prevent clash; cleaned up patch description] Signed-off-by: Paul Walmsley <paul@pwsan.com>
| | | | | * | | | OMAP2430: hwmod: musb: add missing terminator to omap2430_usbhsotg_addrs[]Paul Walmsley2011-09-04
| | | | | | |_|/ | | | | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a missing array terminator to omap2430_usbhsotg_addrs[]. Without this terminator, the omap_hwmod resource building code runs off the end of the array, resulting in at least this error -- if not worse behavior: [ 0.578002] musb-omap2430: failed to claim resource 4 [ 0.583465] omap_device: musb-omap2430: build failed (-16) [ 0.589294] Could not build omap_device for musb-omap2430 usb_otg_hs This should have been part of commit 78183f3fdf76f422431a81852468be01b36db325 ("omap_hwmod: use a null structure record to terminate omap_hwmod_addr_space arrays") but was evidently missed. Signed-off-by: Paul Walmsley <paul@pwsan.com>
| | | | * | | | OMAP4: clock: fix compile warningPaul Walmsley2011-08-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the following compile warning: arch/arm/mach-omap2/clock44xx_data.c: In function 'omap4xxx_clk_init': arch/arm/mach-omap2/clock44xx_data.c:3371:6: warning: 'cpu_clkflg' may be used uninitialized in this function The approach taken here is intended to work if omap4xxx_clk_init() is converted into an initcall. Thanks to Bjarne Steinsbo <bsteinsbo@gmail.com> for proposing another approach. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Bjarne Steinsbo <bsteinsbo@gmail.com>
| | | * | | | | OMAP3: clock: indicate that gpt12_fck and wdt1_fck are in the WKUP clockdomainPaul Walmsley2011-08-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The oscillator that supplies GPT12_FCLK and WDT1_FCLK exists in the WKUP powerdomain[1]. This resolves at least one boot-time warning: omap_hwmod: gpt12_fck: missing clockdomain for gpt12_fck. 1. _OMAP34xx Multimedia High Security (HS) Device Silicon Revision 3.1.x Security Addendum Version K (SWPU119K)_ Figure 3-29. August 2010.
| | * | | | | | OMAP4: clock: re-enable previous clockdomain enable/disable sequencePaul Walmsley2011-08-19
| | | |_|_|/ / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After commit 665d001338b494d6d62810aa99b4c0fa1a0884b9 ("OMAP2+: hwmod: Follow the recommended PRCM module enable sequence"), device drivers for OMAP IP blocks that do not use runtime PM can cause oopses or kernel instability[1][2]. This is because those non-runtime PM drivers do not use the hwmod code, which implements the correct IP block enable and disable sequence. Several options for dealing with this problem have been proposed: 1. Add a new field to the OMAP struct clk to mark clocks that are currently used by non-runtime PM drivers. Modify the clock code to use the old clockdomain sequence for these marked clocks. As drivers are converted to use runtime PM, remove the annotation from the clocks. 2. Similar to #1, but associate the flag with the struct omap_clk instead. 3. Add IDLEST wait support to the OMAP4 clock code, similar to the way it is implemented for OMAP2/3, and enable it in each struct clk currently used by non-runtime PM drivers. As drivers are converted to use runtime PM, remove the annotation from the clocks. 4. Do nothing; leave the problem to those responsible for the unconverted drivers. 5. Re-enable clock-based clockdomain control in the OMAP4 clock code. This would revert back to the behavior of Linux 3.0, simply with a slightly longer module enable/disable latency. Unfortunately, no approach seemed particularly good. Options 1 through 3 seemed unwise due to the following reasons: A. The OMAP struct clks are intended primarily to describe hardware clock nodes, and the intention is that no driver-specific data should be stored there (applies to #1) B. The resulting patch would have been quite large for the -rc series (applies to #1, #2, #3) C. The patch would have been a new, yet temporary hack; and similar fixes have drawn negative comments in the recent past (see for example [3]) Option 4 is undesirable because commit 665d001338b494d6d62810aa99b4c0fa1a0884b9 ("OMAP2+: hwmod: Follow the recommended PRCM module enable sequence") has resulted in a less stable kernel; and kernel stability is more important than OMAP4 power management. Option 5 is the approach taken in this patch. This seemed to be the least intrusive approach for 3.1-rc. The approach in this patch was originally proposed by Ohad Ben-Cohen <ohad@wizery.com>. I'm simply writing the commit message and passing it along. ... Thanks to Luciano Coelho <coelho@ti.com> for reporting the problem. Thanks to Ohad Ben-Cohen <ohad@wizery.com> for tracking the problem down, generating a temporary workaround, and proposing a patch to deal with the problem. Thanks to Rajendra Nayak <rnayak@ti.com> for proposing another patch to deal with the problem. Thanks to Felipe Balbi <balbi@ti.com> for comments. 1. Coelho, Luciano <coelho@ti.com>. _Re: Oops on ehci_hcd when booting 3.0.0-rc2 on panda_. Tue, 09 Aug 2011 14:26:08 +0300. Posted to the <linux-omap@vger.kernel.org> mailing list. Available from (among others) http://www.spinics.net/linux/lists/linux-omap/msg55213.html 2. Munegowda, Keshava <keshava_mgowda@ti.com>. _Re: Oops on ehci_hcd when booting 3.0.0-rc2 on panda_. Thu, 11 Aug 2011 13:51:05 +0530. Posted to the <linux-omap@vger.kernel.org> mailing list. Available from (among others) http://www.spinics.net/linux/lists/linux-omap/msg55371.html 3. King, Russell <linux@arm.linux.org.uk>. _Re: [PATCH 5/8] OMAP4: PM: TEMP: Prevent l3init from idling/force sleep_. Thu, 23 Jun 2011 16:22:49 +0100. Posted to the <linux-omap@vger.kernel.org> mailing list. Available from (among others) http://www.mail-archive.com/linux-omap@vger.kernel.org/msg51392.html Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Luciano Coelho <coelho@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Benoît Cousson <b-cousson@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
| * | | | | | ARM: cns3xxx: Fix newly introduced warnings in the PCIe codeAnton Vorontsov2011-09-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit d5341942d784134f2997b3ff82cd63cf71d1f932 ("PCI: Make the struct pci_dev * argument of pci_fixup_irqs const") did not change argument of pdev_to_cnspci(), and thus introduced the following warnings: CHECK arch/arm/mach-cns3xxx/pcie.c pcie.c:177:60: warning: incorrect type in argument 1 (different modifiers) pcie.c:177:60: expected struct pci_dev *dev pcie.c:177:60: got struct pci_dev const *dev CC arch/arm/mach-cns3xxx/pcie.o pcie.c: In function 'cns3xxx_pcie_map_irq': pcie.c:177: warning: passing argument 1 of 'pdev_to_cnspci' discards qualifiers from pointer target type pcie.c:52: note: expected 'struct pci_dev *' but argument is of type 'const struct pci_dev *' This patch fixes the issue. Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
| * | | | | | ARM: cns3xxx: Fix compile error caused by hardware.h removedTommy Lin2011-09-09
| | |_|_|_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit c9d95fbe59e426eed7f16e7cac812e46ac4772d0 "ARM: convert PCI defines to variables" deleted cns3xxx' hardware.h, but didn't remove references for it, so do it now. This patch removes lines that refer to hardware.h. Signed-off-by: Tommy Lin <tommy.lin.1101@gmail.com> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
* | | | | | ioctl: register LTTng ioctlMathieu Desnoyers2011-09-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The LTTng 2.0 kernel tracer (stand-alone module package, available at http://lttng.org) uses the 0xF6 ioctl range for tracer control and transport operations. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | | Merge branch 'for-linus' of git://github.com/chrismason/linuxLinus Torvalds2011-09-12
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://github.com/chrismason/linux: Btrfs: add dummy extent if dst offset excceeds file end in Btrfs: calc file extent num_bytes correctly in file clone btrfs: xattr: fix attribute removal Btrfs: fix wrong nbytes information of the inode Btrfs: fix the file extent gap when doing direct IO Btrfs: fix unclosed transaction handle in btrfs_cont_expand Btrfs: fix misuse of trans block rsv Btrfs: reset to appropriate block rsv after orphan operations Btrfs: skip locking if searching the commit root in csum lookup btrfs: fix warning in iput for bad-inode Btrfs: fix an oops when deleting snapshots
| * | | | | | Btrfs: add dummy extent if dst offset excceeds file end inLi Zefan2011-09-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | You can see there's no file extent with range [0, 4096]. Check this by btrfsck: # btrfsck /dev/sda7 root 5 inode 258 errors 100 ... Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
| * | | | | | Btrfs: calc file extent num_bytes correctly in file cloneLi Zefan2011-09-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | num_bytes should be 4096 not 12288. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
| * | | | | | btrfs: xattr: fix attribute removalDavid Sterba2011-09-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | An attribute is not removed by 'setfattr -x attr file' and remains visible in attr list. This makes xfstests/062 pass again. Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <chris.mason@oracle.com>
generated by cgit v1.2.2 (git 2.25.0) at 2025-02-22 09:30:38 -0500