aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
* x86, perf, nmi: Disable perf if counters are not accessibleDon Zickus2010-11-26
| | | | | | | | | | | | | | | | | | | | | | | | In a kvm virt guests, the perf counters are not emulated. Instead they return zero on a rdmsrl. The perf nmi handler uses the fact that crossing a zero means the counter overflowed (for those counters that do not have specific interrupt bits). Therefore on kvm guests, perf will swallow all NMIs thinking the counters overflowed. This causes problems for subsystems like kgdb which needs NMIs to do its magic. This problem was discovered by running kgdb tests. The solution is to write garbage into a perf counter during the initialization and hopefully reading back the same number. On kvm guests, the value will be read back as zero and we disable perf as a result. Reported-by: Jason Wessel <jason.wessel@windriver.com> Patch-inspired-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <1290462923-30734-1-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* perf: Fix inherit vs. context rotation bugThomas Gleixner2010-11-26
| | | | | | | | | | | | | | It was found that sometimes children of tasks with inherited events had one extra event. Eventually it turned out to be due to the list rotation no being exclusive with the list iteration in the inheritance code. Cure this by temporarily disabling the rotation while we inherit the events. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Cc: <stable@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* perf symbols: Remove incorrect open-coded container_of()Rabin Vincent2010-11-23
| | | | | | | | | | | | | | | | | | At least on ARM, padding is inserted between rb_node and sym in struct symbol_name_rb_node, causing "((void *)sym) - sizeof(struct rb_node)" to point inside rb_node rather than to the symbol_name_rb_node. Fix this by converting the code to use container_of(). Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <20101123163106.GA25677@debian> Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
* perf record: Handle restrictive permissions in /proc/{kallsyms,modules}Arnaldo Carvalho de Melo2010-11-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 59365d1 commit, even being reverted by 33e0d57, showed a non robust behavior in 'perf record': it really should just warn the user that some functionality will not be available. The new behavior then becomes: [acme@felicio linux]$ ls -la /proc/{kallsyms,modules} -r-------- 1 root root 0 Nov 22 12:19 /proc/kallsyms -r-------- 1 root root 0 Nov 22 12:19 /proc/modules [acme@felicio linux]$ perf record ls -R > /dev/null Couldn't record kernel reference relocation symbol Symbol resolution may be skewed if relocation was used (e.g. kexec). Check /proc/kallsyms permission or run as root. [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.004 MB perf.data (~161 samples) ] [acme@felicio linux]$ perf report --stdio [kernel.kallsyms] with build id 77b05e00e64e4de1c9347d83879779b540d69f00 not found, continuing without symbols # Events: 98 cycles # # Overhead Command Shared Object Symbol # ........ ....... ............... .................... # 48.26% ls [kernel] [k] ffffffff8102b92b 22.49% ls libc-2.12.90.so [.] __strlen_sse2 8.35% ls libc-2.12.90.so [.] __GI___strcoll_l 8.17% ls ls [.] 11580 3.35% ls libc-2.12.90.so [.] _IO_new_file_xsputn 3.33% ls libc-2.12.90.so [.] _int_malloc 1.88% ls libc-2.12.90.so [.] _int_free 0.84% ls libc-2.12.90.so [.] malloc_consolidate 0.84% ls libc-2.12.90.so [.] __readdir64 0.83% ls ls [.] strlen@plt 0.83% ls libc-2.12.90.so [.] __GI_fwrite_unlocked 0.83% ls libc-2.12.90.so [.] __memcpy_sse2 # # (For a higher level overview, try: perf report --sort comm,dso) # [acme@felicio linux]$ It still has the build-ids for DSOs in the maps with hits: [acme@felicio linux]$ perf buildid-list 77b05e00e64e4de1c9347d83879779b540d69f00 [kernel.kallsyms] 09c4a431a4a8b648fcfc2c2bdda70f56050ddff1 /bin/ls af75ea9ad951d25e0f038901a11b3846dccb29a4 /lib64/libc-2.12.90.so [acme@felicio linux]$ That can be used in another machine to resolve kernel symbols. Cc: Eugene Teo <eugeneteo@kernel.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Marcus Meissner <meissner@suse.de> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Stephane Eranian <eranian@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
* x86/kprobes: Prevent kprobes to probe on save_args()Masami Hiramatsu2010-11-18
| | | | | | | | | | | | Prevent kprobes to probe on save_args() since this function will be called from breakpoint exception handler. That will cause infinit loop on breakpoint handling. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: 2nddept-manager@sdl.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20101118101655.2779.2816.stgit@ltc236.sdl.hitachi.co.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* irq_work: Drop cmpxchg() resultSergio Aguirre2010-11-18
| | | | | | | | | | | | | | | | | | The compiler warned us about: kernel/irq_work.c: In function 'irq_work_run': kernel/irq_work.c:148: warning: value computed is not used Dropping the cmpxchg() result is indeed weird, but correct - so annotate away the warning. Signed-off-by: Sergio Aguirre <saaguirre@ti.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1289930567-17828-1-git-send-email-saaguirre@ti.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* perf: Fix owner-list vs exitPeter Zijlstra2010-11-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | Oleg noticed that a perf-fd keeping a reference on the creating task leads to a few funny side effects. There's two different aspects to this: - kernel based perf-events, these should not take out a reference on the creating task and appear on the task's event list since they're not bound to fds nor visible to userspace. - fork() and pthread_create(), these can lead to the creating task dying (and thus the task's event-list becomming useless) but keeping the list and ref alive until the event is closed. Combined they lead to malfunction of the ptrace hw_tracepoints. Cure this by not considering kernel based perf_events for the owner-list and destroying the owner-list when the owner dies. Reported-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Oleg Nesterov <oleg@redhat.com> LKML-Reference: <1289576883.2084.286.camel@laptop> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* Merge branch 'perf/urgent' of ↵Ingo Molnar2010-11-18
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into perf/urgent
| * perf,hw_breakpoint: Initialize hardware api earlierJason Wessel2010-11-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When using early debugging, the kernel does not initialize the hw_breakpoint API early enough and causes the late initialization of the kernel debugger to fail. The boot arguments are: earlyprintk=vga ekgdboc=kbd kgdbwait Then simply type "go" at the kdb prompt and boot. The kernel will later emit the message: kgdb: Could not allocate hwbreakpoints And at that point the kernel debugger will cease to work correctly. The solution is to initialize the hw_breakpoint at the same time that all the other perf call backs are initialized instead of using a core_initcall() initialization which happens well after the kernel debugger can make use of hardware breakpoints. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> CC: Frederic Weisbecker <fweisbec@gmail.com> CC: Ingo Molnar <mingo@elte.hu> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <4CD3396D.1090308@windriver.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
| * x86: Ignore trap bits on single step exceptionsFrederic Weisbecker2010-11-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a single step exception fires, the trap bits, used to signal hardware breakpoints, are in a random state. These trap bits might be set if another exception will follow, like a breakpoint in the next instruction, or a watchpoint in the previous one. Or there can be any junk there. So if we handle these trap bits during the single step exception, we are going to handle an exception twice, or we are going to handle junk. Just ignore them in this case. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=21332 Reported-by: Michael Stefaniuc <mstefani@redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Maciej Rutecki <maciej.rutecki@gmail.com> Cc: Alexandre Julliard <julliard@winehq.org> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: All since 2.6.33.x <stable@kernel.org>
* | x86, hw_nmi: Move backtrace_mask declaration under ARCH_HAS_NMI_WATCHDOGRakib Mullick2010-11-18
| | | | | | | | | | | | | | | | | | | | | | | | | | backtrace_mask has been used under the code context of ARCH_HAS_NMI_WATCHDOG. So put it into that context. We were warned by the following warning: arch/x86/kernel/apic/hw_nmi.c:21: warning: ‘backtrace_mask’ defined but not used Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com> Signed-off-by: Don Zickus <dzickus@redhat.com> LKML-Reference: <1289573455-3410-2-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | Merge branch 'tip/perf/urgent-3' of ↵Ingo Molnar2010-11-18
|\ \ | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/urgent
| * | tracing: Fix recursive user stack traceSteven Rostedt2010-11-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The user stack trace can fault when examining the trace. Which would call the do_page_fault handler, which would trace again, which would do the user stack trace, which would fault and call do_page_fault again ... Thus this is causing a recursive bug. We need to have a recursion detector here. [ Resubmitted by Jiri Olsa ] [ Eric Dumazet recommended using __this_cpu_* instead of __get_cpu_* ] Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Jiri Olsa <jolsa@redhat.com> LKML-Reference: <1289390172-9730-3-git-send-email-jolsa@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
| * | tracing: Force arch_local_irq_* notrace for paravirtSteven Rostedt2010-11-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When running ktest.pl randconfig tests, I would sometimes trigger a lockdep annotation bug (possible reason: unannotated irqs-on). This triggering happened right after function tracer self test was executed. After doing a config bisect I found that this was caused with having function tracer, paravirt guest, prove locking, and rcu torture all enabled. The rcu torture just enhanced the likelyhood of triggering the bug. Prove locking was needed, since it was the thing that was bugging. Function tracer would trace and disable interrupts in all sorts of funny places. paravirt guest would turn arch_local_irq_* into functions that would be traced. Besides the fact that tracing arch_local_irq_* is just a bad idea, this is what is happening. The bug happened simply in the local_irq_restore() code: if (raw_irqs_disabled_flags(flags)) { \ raw_local_irq_restore(flags); \ trace_hardirqs_off(); \ } else { \ trace_hardirqs_on(); \ raw_local_irq_restore(flags); \ } \ The raw_local_irq_restore() was defined as arch_local_irq_restore(). Now imagine, we are about to enable interrupts. We go into the else case and call trace_hardirqs_on() which tells lockdep that we are enabling interrupts, so it sets the current->hardirqs_enabled = 1. Then we call raw_local_irq_restore() which calls arch_local_irq_restore() which gets traced! Now in the function tracer we disable interrupts with local_irq_save(). This is fine, but flags is stored that we have interrupts disabled. When the function tracer calls local_irq_restore() it does it, but this time with flags set as disabled, so we go into the if () path. This keeps interrupts disabled and calls trace_hardirqs_off() which sets current->hardirqs_enabled = 0. When the tracer is finished and proceeds with the original code, we enable interrupts but leave current->hardirqs_enabled as 0. Which now breaks lockdeps internal processing. Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
| * | tracing: Fix module use of trace_bprintk()Steven Rostedt2010-11-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On use of trace_printk() there's a macro that determines if the format is static or a variable. If it is static, it defaults to __trace_bprintk() otherwise it uses __trace_printk(). A while ago, Lai Jiangshan added __trace_bprintk(). In that patch, we discussed a way to allow modules to use it. The difference between __trace_bprintk() and __trace_printk() is that for faster processing, just the format and args are stored in the trace instead of running it through a sprintf function. In order to do this, the format used by the __trace_bprintk() had to be persistent. See commit 1ba28e02a18cbdbea123836f6c98efb09cbf59ec The problem comes with trace_bprintk() where the module is unloaded. The pointer left in the buffer is still pointing to the format. To solve this issue, the formats in the module were copied into kernel core. If the same format was used, they would use the same copy (to prevent memory leak). This all worked well until we tried to merge everything. At the time this was written, Lai Jiangshan, Frederic Weisbecker, Ingo Molnar and myself were all touching the same code. When this was merged, we lost the part of it that was in module.c. This kept out the copying of the formats and unloading the module could cause bad pointers left in the ring buffer. This patch adds back (with updates required for current kernel) the module code that sets up the necessary pointers. Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* | | Linux 2.6.37-rc2v2.6.37-rc2Linus Torvalds2010-11-15
| | |
* | | capabilities/syslog: open code cap_syslog logic to fix build failureEric Paris2010-11-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The addition of CONFIG_SECURITY_DMESG_RESTRICT resulted in a build failure when CONFIG_PRINTK=n. This is because the capabilities code which used the new option was built even though the variable in question didn't exist. The patch here fixes this by moving the capabilities checks out of the LSM and into the caller. All (known) LSMs should have been calling the capabilities hook already so it actually makes the code organization better to eliminate the hook altogether. Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds2010-11-15
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: arm: omap1: devices: need to return with a value OMAP1: camera.h: add missing include omap: dma: Add read-back to DMA interrupt handler to avoid spuriousinterrupts OMAP2: Devkit8000: Fix mmc regulator failure
| * | | arm: omap1: devices: need to return with a valueFelipe Balbi2010-11-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Get rid of the following warning: arch/arm/mach-omap1/devices.c: In function 'omap_init_wdt': arch/arm/mach-omap1/devices.c:298: warning: 'return' with no value, in function returning non-void while at that, also change: platform_device_register(); return 0; into: return platform_device_register(); Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | | OMAP1: camera.h: add missing includeJanusz Krzysztofik2010-11-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | #include <media/omap1_camera.h> directive is required to compile the dependant boards (board-ams-delta for now). Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | | omap: dma: Add read-back to DMA interrupt handler to avoid spuriousinterruptsMathias Nyman2010-11-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Flush the writes to IRQSTATUS_L0 register in the DMA interrupt handler by reading the register directly after write. This prevents the spurious DMA interrupts noted when using VDD_OPP 1 Signed-off-by: Mathias Nyman <mathias.nyman@nokia.com> Acked-by: Santosh Shilimkar <Santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | | OMAP2: Devkit8000: Fix mmc regulator failureThomas Weber2010-11-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the following error: >regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby >twl_reg twl_reg.6: can't register VMMC1, -22 >twl_reg: probe of twl_reg.6 failed with error -22 Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | | | Merge branch 'hwmon-for-linus' of ↵Linus Torvalds2010-11-15
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (w83795) Check for BEEP pin availability hwmon: (w83795) Clear intrusion alarm immediately hwmon: (w83795) Read the intrusion state properly hwmon: (w83795) Print the actual temperature channels as sources hwmon: (w83795) List all usable temperature sources hwmon: (w83795) Expose fan control method hwmon: (w83795) Fix fan control mode attributes hwmon: (lm95241) Check validity of input values hwmon: Change mail address of Hans J. Koch
| * | | | hwmon: (w83795) Check for BEEP pin availabilityJean Delvare2010-11-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On the W83795ADG, there's a single pin for BEEP and OVT#, so you can't have both. Check the configuration and don't create beep attributes when BEEP pin is not available. The W83795G has a dedicated BEEP pin so the functionality is always available there. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
| * | | | hwmon: (w83795) Clear intrusion alarm immediatelyJean Delvare2010-11-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When asked to clear the intrusion alarm, do so immediately. We have to invalidate the cache to make sure the new status will be read. But we also have to read from the status register once to clear the pending alarm, as writing to CLR_CHS surprising won't clear it automatically. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
| * | | | hwmon: (w83795) Read the intrusion state properlyJean Delvare2010-11-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We can't read the intrusion state from the real-time alarm registers as we do for all other alarm flags, because real-time alarm bits don't stick (by definition) and the intrusion state has to stick until explicitly cleared (otherwise it has little value.) So we have to use the interrupt status register instead, which is read from the same address but with a configuration bit flipped in another register. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
| * | | | hwmon: (w83795) Print the actual temperature channels as sourcesJean Delvare2010-11-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Don't expose raw register values to user-space. Decode and encode temperature channels selected as temperature sources as needed. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
| * | | | hwmon: (w83795) List all usable temperature sourcesJean Delvare2010-11-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Temperature sources are not correlated directly with temperature channels. A look-up table is required to find out which temperature sources can be used depending on which temperature channels (both analog and digital) are enabled. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
| * | | | hwmon: (w83795) Expose fan control methodJean Delvare2010-11-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Expose fan control method (DC vs. PWM) using the standard sysfs attributes. I've made it read-only as the board should be wired for a given mode, the BIOS should have set up the chip for this mode, and you shouldn't have to change it. But it would be easy enough to make it changeable if someone comes up with a use case. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
| * | | | hwmon: (w83795) Fix fan control mode attributesJean Delvare2010-11-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There were two bugs: * Speed cruise mode was improperly reported for all fans but fan1. * Fan control method (PWM vs. DC) was mixed with the control mode. It will be added back as a separate attribute, as per the standard sysfs interface. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
| * | | | hwmon: (lm95241) Check validity of input valuesJean Delvare2010-11-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This clears the following build-time warnings I was seeing: drivers/hwmon/lm95241.c: In function "set_interval": drivers/hwmon/lm95241.c:132:15: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result drivers/hwmon/lm95241.c: In function "set_max2": drivers/hwmon/lm95241.c:278:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result drivers/hwmon/lm95241.c: In function "set_max1": drivers/hwmon/lm95241.c:277:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result drivers/hwmon/lm95241.c: In function "set_min2": drivers/hwmon/lm95241.c:249:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result drivers/hwmon/lm95241.c: In function "set_min1": drivers/hwmon/lm95241.c:248:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result drivers/hwmon/lm95241.c: In function "set_type2": drivers/hwmon/lm95241.c:220:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result drivers/hwmon/lm95241.c: In function "set_type1": drivers/hwmon/lm95241.c:219:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result This also fixes a small race in set_interval() as a side effect: by working with a temporary local variable we prevent data->interval from being accessed at a time it contains the interval value in the wrong unit. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Davide Rizzo <elpa.rizzo@gmail.com>
| * | | | hwmon: Change mail address of Hans J. KochHans J. Koch2010-11-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | My old mail address doesn't exist anymore. This changes all occurrences to my new address. Signed-off-by: Hans J. Koch <hjk@hansjkoch.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* | | | | Merge branch 'i2c-for-linus' of ↵Linus Torvalds2010-11-15
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c: Sanity checks on adapter registration i2c: Mark i2c_adapter.id as deprecated i2c: Drivers shouldn't include <linux/i2c-id.h> i2c: Delete unused adapter IDs i2c: Remove obsolete cleanup for clientdata
| * | | | | i2c: Sanity checks on adapter registrationJean Delvare2010-11-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make sure I2C adapters being registered have the required struct fields set. If they don't, problems will happen later. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | | | | i2c: Mark i2c_adapter.id as deprecatedJean Delvare2010-11-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It's about time to make it clear that i2c_adapter.id is deprecated. Hopefully this will remind the last user to move over to a different strategy. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Jarod Wilson <jarod@redhat.com> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
| * | | | | i2c: Drivers shouldn't include <linux/i2c-id.h>Jean Delvare2010-11-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Drivers don't need to include <linux/i2c-id.h>, especially not when they don't use anything that header file provides. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Michael Hunold <michael@mihu.de> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | | | i2c: Delete unused adapter IDsJean Delvare2010-11-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Delete unused I2C adapter IDs. Special cases are: * I2C_HW_B_RIVA was still set in driver rivafb, however no other driver is ever looking for this value, so we can safely remove it. * I2C_HW_B_HDPVR is used in staging driver lirc_zilog, however no adapter ID is ever set to this value, so the code in question never runs. As the code additionally expects that I2C_HW_B_HDPVR may not be defined, we can delete it now and let the lirc_zilog driver maintainer rewrite this piece of code. Big thanks for Hans Verkuil for doing all the hard work :) Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Jarod Wilson <jarod@redhat.com> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
| * | | | | i2c: Remove obsolete cleanup for clientdataWolfram Sang2010-11-15
| |/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A few new i2c-drivers came into the kernel which clear the clientdata-pointer on exit. This is obsolete meanwhile, so fix it and hope the word will spread. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Alan Cox <alan@linux.intel.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* | | | | Merge branch 'for-linus' of ↵Linus Torvalds2010-11-15
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: sysfs: fix printk warnings PCI: fix pci_bus_alloc_resource() hang, prefer positive decode PCI: read current power state at enable time PCI: fix size checks for mmap() on /proc/bus/pci files x86/PCI: coalesce overlapping host bridge windows PCI hotplug: ibmphp: Add check to prevent reading beyond mapped area
| * | | | | PCI: sysfs: fix printk warningsRandy Dunlap2010-11-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cast pci_resource_start() and pci_resource_len() to u64 for printk. drivers/pci/pci-sysfs.c:753: warning: format '%16Lx' expects type 'long long unsigned int', but argument 9 has type 'resource_size_t' drivers/pci/pci-sysfs.c:753: warning: format '%16Lx' expects type 'long long unsigned int', but argument 10 has type 'resource_size_t' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | | | PCI: fix pci_bus_alloc_resource() hang, prefer positive decodeBjorn Helgaas2010-11-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a PCI bus has two resources with the same start/end, e.g., pci_bus 0000:04: resource 2 [mem 0xd0000000-0xd7ffffff pref] pci_bus 0000:04: resource 7 [mem 0xd0000000-0xd7ffffff] the previous pci_bus_find_resource_prev() implementation would alternate between them forever: pci_bus_find_resource_prev(... [mem 0xd0000000-0xd7ffffff pref]) returns [mem 0xd0000000-0xd7ffffff] pci_bus_find_resource_prev(... [mem 0xd0000000-0xd7ffffff]) returns [mem 0xd0000000-0xd7ffffff pref] pci_bus_find_resource_prev(... [mem 0xd0000000-0xd7ffffff pref]) returns [mem 0xd0000000-0xd7ffffff] ... This happened because there was no ordering between two resources with the same start and end. A resource that had the same start and end as the cursor, but was not itself the cursor, was considered to be before the cursor. This patch fixes the hang by making a fixed ordering between any two resources. In addition, it tries to allocate from positively decoded regions before using any subtractively decoded resources. This means we will use a positive decode region before a subtractive decode one, even if it means using a smaller address. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=22062 Reported-by: Borislav Petkov <bp@amd64.org> Tested-by: Borislav Petkov <bp@amd64.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | | | PCI: read current power state at enable timeJesse Barnes2010-11-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we enable a PCI device, we avoid doing a lot of the initial setup work if the device's enable count is non-zero. If we don't fetch the power state though, we may later fail to set up MSI due to the unknown status. So pick it up before we short circuit the rest due to a pre-existing enable or mismatched enable/disable pair (as happens with VGA devices, which are special in a special way). Tested-by: Jesse Brandeburg <jesse.brandeburg@gmail.com> Reported-by: Dave Airlie <airlied@linux.ie> Tested-by: Dave Airlie <airlied@linux.ie> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | | | PCI: fix size checks for mmap() on /proc/bus/pci filesMartin Wilck2010-11-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The checks for valid mmaps of PCI resources made through /proc/bus/pci files that were introduced in 9eff02e2042f96fb2aedd02e032eca1c5333d767 have several problems: 1. mmap() calls on /proc/bus/pci files are made with real file offsets > 0, whereas under /sys/bus/pci/devices, the start of the resource corresponds to offset 0. This may lead to false negatives in pci_mmap_fits(), which implicitly assumes the /sys/bus/pci/devices layout. 2. The loop in proc_bus_pci_mmap doesn't skip empty resouces. This leads to false positives, because pci_mmap_fits() doesn't treat empty resources correctly (the calculated size is 1 << (8*sizeof(resource_size_t)-PAGE_SHIFT) in this case!). 3. If a user maps resources with BAR > 0, pci_mmap_fits will emit bogus WARNINGS for the first resources that don't fit until the correct one is found. On many controllers the first 2-4 BARs are used, and the others are empty. In this case, an mmap attempt will first fail on the non-empty BARs (including the "right" BAR because of 1.) and emit bogus WARNINGS because of 3., and finally succeed on the first empty BAR because of 2. This is certainly not the intended behaviour. This patch addresses all 3 issues. Updated with an enum type for the additional parameter for pci_mmap_fits(). Cc: stable@kernel.org Signed-off-by: Martin Wilck <martin.wilck@ts.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | | | x86/PCI: coalesce overlapping host bridge windowsBjorn Helgaas2010-11-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some BIOSes provide PCI host bridge windows that overlap, e.g., pci_root PNP0A03:00: host bridge window [mem 0xb0000000-0xffffffff] pci_root PNP0A03:00: host bridge window [mem 0xafffffff-0xdfffffff] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xffffffff] If we simply insert these as children of iomem_resource, the second window fails because it conflicts with the first, and the third is inserted as a child of the first, i.e., b0000000-ffffffff PCI Bus 0000:00 f0000000-ffffffff PCI Bus 0000:00 When we claim PCI device resources, this can cause collisions like this if we put them in the first window: pci 0000:00:01.0: address space collision: [mem 0xff300000-0xff4fffff] conflicts with PCI Bus 0000:00 [mem 0xf0000000-0xffffffff] Host bridge windows are top-level resources by definition, so it doesn't make sense to make the third window a child of the first. This patch coalesces any host bridge windows that overlap. For the example above, the result is this single window: pci_root PNP0A03:00: host bridge window [mem 0xafffffff-0xffffffff] This fixes a 2.6.34 regression. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=17011 Reported-and-tested-by: Anisse Astier <anisse@astier.eu> Reported-and-tested-by: Pramod Dematagoda <pmd.lotr.gandalf@gmail.com> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | | | PCI hotplug: ibmphp: Add check to prevent reading beyond mapped areaSteven Rostedt2010-11-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While testing various randconfigs with ktest.pl, I hit the following panic: BUG: unable to handle kernel paging request at f7e54b03 IP: [<c0d63409>] ibmphp_access_ebda+0x101/0x19bb Adding printks, I found that the loop that reads the ebda blocks can move out of the mapped section. ibmphp_access_ebda: start=f7e44c00 size=5120 end=f7e46000 ibmphp_access_ebda: io_mem=f7e44d80 offset=384 ibmphp_access_ebda: io_mem=f7e54b03 offset=65283 The start of the iomap was at f7e44c00 and had a size of 5120, making the end f7e46000. We start with an offset of 0x180 or 384, giving the first read at 0xf7e44d80. Reading that location yields 65283, which is much bigger than the 5120 that was allocated and makes the next read at f7e54b03 which is outside the mapped area. Perhaps this is a bug in the driver, or buggy hardware, but this patch is more about not crashing my box on start up and just giving a warning if it detects this error. This patch at least lets my box boot with just a warning. Cc: Chandru Siddalingappa <chandru@linux.vnet.ibm.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | | | | | include/linux/kernel.h: Move logging bits to include/linux/printk.hLinus Torvalds2010-11-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the logging bits from kernel.h into printk.h so that there is a bit more logical separation of the generic from the printk logging specific parts. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | | Fix gcc 4.5.1 miscompiling drivers/char/i8k.c (again)Jim Bos2010-11-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The fix in commit 6b4e81db2552 ("i8k: Tell gcc that *regs gets clobbered") to work around the gcc miscompiling i8k.c to add "+m (*regs)" caused register pressure problems and a build failure. Changing the 'asm' statement to 'asm volatile' instead should prevent that and works around the gcc bug as well, so we can remove the "+m". [ Background on the gcc bug: a memory clobber fails to mark the function the asm resides in as non-pure (aka "__attribute__((const))"), so if the function does nothing else that triggers the non-pure logic, gcc will think that that function has no side effects at all. As a result, callers will be mis-compiled. Adding the "+m" made gcc see that it's not a pure function, and so does "asm volatile". The problem was never really the need to mark "*regs" as changed, since the memory clobber did that part - the problem was just a bug in the gcc "pure" function analysis - Linus ] Signed-off-by: Jim Bos <jim876@xs4all.nl> Acked-by: Jakub Jelinek <jakub@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixesLinus Torvalds2010-11-15
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes: GFS2: Fix inode deallocation race
| * | | | | | GFS2: Fix inode deallocation raceSteven Whitehouse2010-11-15
| | |/ / / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This area of the code has always been a bit delicate due to the subtleties of lock ordering. The problem is that for "normal" alloc/dealloc, we always grab the inode locks first and the rgrp lock later. In order to ensure no races in looking up the unlinked, but still allocated inodes, we need to hold the rgrp lock when we do the lookup, which means that we can't take the inode glock. The solution is to borrow the technique already used by NFS to solve what is essentially the same problem (given an inode number, look up the inode carefully, checking that it really is in the expected state). We cannot do that directly from the allocation code (lock ordering again) so we give the job to the pre-existing delete workqueue and carry on with the allocation as normal. If we find there is no space, we do a journal flush (required anyway if space from a deallocation is to be released) which should block against the pending deallocations, so we should always get the space back. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* | | | | | Merge branch 's5p-fixes-for-linus' of ↵Linus Torvalds2010-11-15
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung * 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: SAMSUNG: Fix HAVE_S3C_RTC warnings ARM: SAMSUNG: Fix HAVE_S3C2410_I2C warnings ARM: SAMSUNG: Fix HAVE_S3C2410_WATCHDOG warnings
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-27 01:09:13 -0500