aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
* MIPS: OCTEON: Add semaphore to serialize bootbus accesses.David Daney2015-04-01
| | | | | | | | | | | | | | | | | | | | | Some hardware blocks attached to the OCTEON bootbus run asynchronously to accesses from the CPUs. These include MMC/SD host, CF(when using DMA), and NAND controller. A bus error, or corrupt data may occur if a CPU is trying to access a bootbus connected device at the same time the bus is running asynchronous operations. To work around these problems we add this semaphore that must be acquired before initiating bootbus activity. Subsequent patches will add users for this. Signed-off-by: David Daney <david.daney@cavium.com> [aleksey.makarov@auriga.com: combine the patches] Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com> Signed-off-by: Chandrakala Chavva <cchavva@caviumnetworks.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9459/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BMIPS: Add DTS files for several platformsKevin Cernekee2015-04-01
| | | | | | | | | | | | | | | | | | | | | | Most of the supported chips use legacy (non-DT) bootloaders, so they will need to select an appropriate builtin DTB at compile time until the bootloader is updated. Provide suitable DTS files, and a means to compile one of them into the kernel image. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com> Cc: f.fainelli@gmail.com Cc: abrestic@chromium.org Cc: tglx@linutronix.de Cc: jason@lakedaemon.net Cc: jogo@openwrt.org Cc: arnd@arndb.de Cc: computersforpeace@gmail.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8858/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BMIPS: Update DT bindings to reflect new SoC supportKevin Cernekee2015-04-01
| | | | | | | | | | | | | | | | | | | Add an entry for each supported Broadcom SoC. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com> Cc: f.fainelli@gmail.com Cc: abrestic@chromium.org Cc: tglx@linutronix.de Cc: jason@lakedaemon.net Cc: jogo@openwrt.org Cc: arnd@arndb.de Cc: computersforpeace@gmail.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8857/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BMIPS: Refresh BCM3384 DTS filesKevin Cernekee2015-04-01
| | | | | | | | | | | | | | | | | | | | | The DT bindings for this platform have changed as the bootloader and product requirements evolved. In particular, there are both Linux-on-Zephyr and Linux-on-Viper configurations. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: jaedon.shin@gmail.com Cc: abrestic@chromium.org Cc: tglx@linutronix.de Cc: jason@lakedaemon.net Cc: jogo@openwrt.org Cc: arnd@arndb.de Cc: computersforpeace@gmail.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8856/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BMIPS: Enable additional peripheral and CPU support in defconfigKevin Cernekee2015-04-01
| | | | | | | | | | | | | | | | | | | | Also, add an LE defconfig for set-top box (BCM7xxx). This will allow the BMIPS kernel to run on several non-BCM3384 platforms. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com> Cc: f.fainelli@gmail.com Cc: abrestic@chromium.org Cc: tglx@linutronix.de Cc: jason@lakedaemon.net Cc: jogo@openwrt.org Cc: arnd@arndb.de Cc: computersforpeace@gmail.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8855/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BMIPS: Use a non-default FIXADDR_TOP settingKevin Cernekee2015-04-01
| | | | | | | | | | | | | | | | | | | This will be required to support BMIPS3300 platforms. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: jaedon.shin@gmail.com Cc: abrestic@chromium.org Cc: tglx@linutronix.de Cc: jason@lakedaemon.net Cc: jogo@openwrt.org Cc: arnd@arndb.de Cc: computersforpeace@gmail.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8854/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BMIPS: Delete the irqchip driver from irq.cKevin Cernekee2015-04-01
| | | | | | | | | | | | | | | | | | | | | | | BCM3384/BCM63xx can use the common drivers/irqchip/irq-bcm7120-l2.c for this purpose; BCM7xxx will use drivers/irqchip/irq-bcm7038-l1.c. We no longer need this code under arch/mips. [ralf@linux-mips.org: Fix conflicts.] Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: jaedon.shin@gmail.com Cc: abrestic@chromium.org Cc: tglx@linutronix.de Cc: jason@lakedaemon.net Cc: jogo@openwrt.org Cc: arnd@arndb.de Cc: computersforpeace@gmail.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8853/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BMIPS: Add quirks for several Broadcom platformsKevin Cernekee2015-04-01
| | | | | | | | | | | | | | | | | | | | | A couple of chips require special handling in order to make SMP secondary boot and/or exception vectors work correctly. Take care of these in setup.c. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: jaedon.shin@gmail.com Cc: abrestic@chromium.org Cc: tglx@linutronix.de Cc: jason@lakedaemon.net Cc: jogo@openwrt.org Cc: arnd@arndb.de Cc: computersforpeace@gmail.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8852/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BMIPS: Remove bogus bus nameKevin Cernekee2015-04-01
| | | | | | | | | | | | | | | | | | | There is no "bcm3384" bus so let's just remove it to avoid confusion. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: jaedon.shin@gmail.com Cc: abrestic@chromium.org Cc: tglx@linutronix.de Cc: jason@lakedaemon.net Cc: jogo@openwrt.org Cc: arnd@arndb.de Cc: computersforpeace@gmail.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8851/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BMIPS: Rewrite DMA code to use "dma-ranges" propertyKevin Cernekee2015-04-01
| | | | | | | | | | | | | | | | | | | | This is a more standardized way of handling DMA remapping, and it is suitable for the memory map found on BCM3384. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: jaedon.shin@gmail.com Cc: abrestic@chromium.org Cc: tglx@linutronix.de Cc: jason@lakedaemon.net Cc: jogo@openwrt.org Cc: arnd@arndb.de Cc: computersforpeace@gmail.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8850/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BMIPS: Document the firmware->kernel DTB interfaceKevin Cernekee2015-04-01
| | | | | | | | | | | | | | | | | | | Add a new section covering the Generic BMIPS machine type. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: jaedon.shin@gmail.com Cc: abrestic@chromium.org Cc: tglx@linutronix.de Cc: jason@lakedaemon.net Cc: jogo@openwrt.org Cc: arnd@arndb.de Cc: computersforpeace@gmail.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8849/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Reorder MIPS_L1_CACHE_SHIFT prioritiesKevin Cernekee2015-04-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | Enabling support for more than one BMIPS CPU in the same build may result in different L1_CACHE_SHIFT values, e.g. CPU_BMIPS5000 selects MIPS_L1_CACHE_SHIFT_7 CPU_BMIPS4380 selects MIPS_L1_CACHE_SHIFT_6 anything else defaults to MIPS_L1_CACHE_SHIFT_5 Ensure that if more than one MIPS_L1_CACHE_SHIFT_x option is selected, Kconfig sets CONFIG_MIPS_L1_CACHE_SHIFT to the highest value. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: jaedon.shin@gmail.com Cc: abrestic@chromium.org Cc: tglx@linutronix.de Cc: jason@lakedaemon.net Cc: jogo@openwrt.org Cc: arnd@arndb.de Cc: computersforpeace@gmail.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8847/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Let __dt_register_buses accept a single bus typeKevin Cernekee2015-04-01
| | | | | | | | | | | | | | | | | | | Some machines only have one bus type to register (e.g. "simple-bus"). Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: jaedon.shin@gmail.com Cc: abrestic@chromium.org Cc: tglx@linutronix.de Cc: jason@lakedaemon.net Cc: jogo@openwrt.org Cc: arnd@arndb.de Cc: computersforpeace@gmail.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8845/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* IRQCHIP: Add new driver for BCM7038-style level 1 interrupt controllersKevin Cernekee2015-04-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the main peripheral IRQ controller on the BCM7xxx MIPS chips; it has the following characteristics: - 64 to 160+ level IRQs - Atomic set/clear registers - Reasonably predictable register layout (N status words, then N mask status words, then N mask set words, then N mask clear words) - SMP affinity supported on most systems - Typically connected to MIPS IRQ 2,3,2,3 on CPUs 0,1,2,3 This driver registers one IRQ domain and one IRQ chip to cover all instances of the block. Up to 4 instances of the block may appear, as it supports 4-way IRQ affinity on BCM7435. The same block exists on the ARM BCM7xxx chips, but typically the ARM GIC is used instead. So this driver is primarily intended for MIPS STB chips. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: jaedon.shin@gmail.com Cc: abrestic@chromium.org Cc: tglx@linutronix.de Cc: jason@lakedaemon.net Cc: jogo@openwrt.org Cc: arnd@arndb.de Cc: computersforpeace@gmail.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8844/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* IRQCHIP: bcm7120-l2: Add support for BCM3380-style controllersKevin Cernekee2015-04-01
| | | | | | | | | | | | | | | | | | | | | These controllers support multiple enable/status pairs (64+ IRQs), can put the enable/status words at different offsets, and do not support multiple parent IRQs. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: jaedon.shin@gmail.com Cc: abrestic@chromium.org Cc: tglx@linutronix.de Cc: jason@lakedaemon.net Cc: jogo@openwrt.org Cc: arnd@arndb.de Cc: computersforpeace@gmail.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8843/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* IRQCHIP: bcm7120-l2: Split STB-specific logic into its own functionKevin Cernekee2015-04-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The BCM7xxx instances of this block (listed in the register manual as simply "IRQ0") all have the following items in common: - brcm,int-map-mask: for routing different bits in the L2 to different parent IRQs - brcm,int-fwd-mask: for hardwiring certain IRQs to bypass the L2 and use dedicated L1 lines - one enable/status pair (32 bits only) Much of the driver code can be shared with BCM3380-style controllers, but in order to do this cleanly, let's split out the BCM7xxx-specific logic first. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: jaedon.shin@gmail.com Cc: abrestic@chromium.org Cc: tglx@linutronix.de Cc: jason@lakedaemon.net Cc: jogo@openwrt.org Cc: arnd@arndb.de Cc: computersforpeace@gmail.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8842/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* IRQCHIP: bcm7120-l2: Refactor driver for arbitrary IRQEN/IRQSTAT offsetsKevin Cernekee2015-04-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the driver assumes that REG_BASE+0x00 is the IRQ enable mask, and REG_BASE+0x04 is the IRQ status mask. This is true on BCM3384 and BCM7xxx, but it is not true for some of the controllers found on BCM63xx chips. So we will change a couple of key assumptions: - Don't assume that both the IRQEN and IRQSTAT registers will be covered by a single ioremap() operation. - Don't assume any particular ordering (IRQSTAT might show up before IRQEN on some chips). - For an L2 controller with >=64 IRQs, don't assume that every IRQEN/IRQSTAT pair will use the same register spacing. This patch changes the "plumbing" but doesn't yet provide a way for users to instantiate a controller with arbitrary IRQEN/IRQSTAT offsets. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: jaedon.shin@gmail.com Cc: abrestic@chromium.org Cc: tglx@linutronix.de Cc: jason@lakedaemon.net Cc: jogo@openwrt.org Cc: computersforpeace@gmail.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8841/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* IRQCHIP: brcmstb-l2: don't clear wakeable interrupts at init timeBrian Norris2015-04-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Wakeable interrupts might be pending at boot/init time, because wakeup interrupts might have triggered a resume from S5. So don't clear such wakeups. This means that any driver which requests a wakeable interrupt bit should be prepared to handle an interrupt as soon as they call request_irq(). (This is technically already the correct development practice, but some drivers probably expect not to receive interrupts until they have performed some I/O.) Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: jaedon.shin@gmail.com Cc: abrestic@chromium.org Cc: tglx@linutronix.de Cc: jason@lakedaemon.net Cc: jogo@openwrt.org Cc: arnd@arndb.de Cc: computersforpeace@gmail.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8840/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* IRQCHIP: Update docs regarding irq_domain_add_tree()Kevin Cernekee2015-04-01
| | | | | | | | | | | | | | | | | | | Several drivers now use this API, including the ARM GIC driver, so remove the outdated comment. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: jaedon.shin@gmail.com Cc: abrestic@chromium.org Cc: tglx@linutronix.de Cc: jason@lakedaemon.net Cc: jogo@openwrt.org Cc: computersforpeace@gmail.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8839/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: bcm3384: Rename "bcm3384" target to "bmips"Kevin Cernekee2015-04-01
| | | | | | | | | | | | | | | | | | | | | | This platform is configured primarily through device tree, and we can reuse the same code to support a bunch of other chips. Change the name to reflect this. [ralf@linux-mips.org: Fix conflicts with other patches.] Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: jaedon.shin@gmail.com Cc: abrestic@chromium.org Cc: tglx@linutronix.de Cc: jason@lakedaemon.net Cc: jogo@openwrt.org Cc: computersforpeace@gmail.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8838/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Add dtbs_install targetAndrew Bresticker2015-04-01
| | | | | | | | | | | | | | | | | | | | Add the dtbs_install Makefile target to install the dtb files into $INSTALL_DTBS_PATH. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Tested-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: jaedon.shin@gmail.com Cc: tglx@linutronix.de Cc: jason@lakedaemon.net Cc: jogo@openwrt.org Cc: arnd@arndb.de Cc: computersforpeace@gmail.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8836/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Move device-trees into vendor sub-directoriesAndrew Bresticker2015-04-01
| | | | | | | | | | | | | | | | | | | Move the MIPS device-trees into the appropriate vendor sub-directories. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Tested-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: jaedon.shin@gmail.com Cc: tglx@linutronix.de Cc: jason@lakedaemon.net Cc: jogo@openwrt.org Cc: arnd@arndb.de Cc: computersforpeace@gmail.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8835/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Add support for fine granularity task level IRQ time accountingDeng-Cheng Zhu2015-04-01
| | | | | | | | | | | | With sched_clock being ready, it makes sense to add the option of IRQ time accounting -- When we have a fast enough sched_clock, IRQ time accounting will be enabled (see sched_clock_register). Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: linux-mips@linux-mips.org Cc: macro@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9489/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: csrc-sb1250: Implement read_sched_clockDeng-Cheng Zhu2015-04-01
| | | | | | | | | | | Use sb1250 hpt for sched_clock source. This implementation will give high resolution cputime accounting. Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: linux-mips@linux-mips.org Cc: macro@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9488/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: csrc-sb1250: Remove FSF mail address from GPL noticeDeng-Cheng Zhu2015-04-01
| | | | | | | | | | | | | | | | This is to make checkpatch.pl happy for the next patch. It would otherwise say -- ERROR: Do not include the paragraph about writing to the Free Software Foundation's mailing address from the sample GPL notice. The FSF has changed addresses in the past, and may do so again. Linux already includes a copy of the GPL. Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: linux-mips@linux-mips.org Cc: macro@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9487/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: csrc-sb1250: Extract hpt cycle acquisition from sb1250_hpt_readDeng-Cheng Zhu2015-04-01
| | | | | | | | | | | This is to prepare for the upcoming read_sched_clock implementation, which will also need to get cycles from the high precision timer. Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: linux-mips@linux-mips.org Cc: macro@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9486/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: jz4740: Implement read_sched_clockDeng-Cheng Zhu2015-04-01
| | | | | | | | | | | Use jz4740 timer counter for sched_clock source. This implementation will give high resolution cputime accounting. Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: linux-mips@linux-mips.org Cc: macro@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9485/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: cevt-txx9: Implement read_sched_clockDeng-Cheng Zhu2015-04-01
| | | | | | | | | | | Use txx9 up-counter for sched_clock source. This implementation will give high resolution cputime accounting. Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: linux-mips@linux-mips.org Cc: macro@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9484/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: sgi-ip27: Implement read_sched_clockDeng-Cheng Zhu2015-04-01
| | | | | | | | | | | Use ip27 hub real time counter for sched_clock source. This implementation will give high resolution cputime accounting. Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: linux-mips@linux-mips.org Cc: macro@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9483/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: csrc-ioasic: Implement read_sched_clockDeng-Cheng Zhu2015-04-01
| | | | | | | | | | | | Use DEC I/O ASIC's free-running counter for sched_clock source. This implementation will give high resolution cputime accounting. Acked-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: linux-mips@linux-mips.org Cc: macro@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9482/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: csrc-ioasic: Remove FSF mail address from GPL noticeDeng-Cheng Zhu2015-04-01
| | | | | | | | | | | | | | | | | This is to make checkpatch.pl happy for the next patch. It would otherwise say -- ERROR: Do not include the paragraph about writing to the Free Software Foundation's mailing address from the sample GPL notice. The FSF has changed addresses in the past, and may do so again. Linux already includes a copy of the GPL. Acked-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: linux-mips@linux-mips.org Cc: macro@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9481/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: csrc-bcm1480: Implement read_sched_clockDeng-Cheng Zhu2015-04-01
| | | | | | | | | | | Use the ZBbus cycle counter for sched_clock source. This implementation will give high resolution cputime accounting. Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: linux-mips@linux-mips.org Cc: macro@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9480/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: csrc-bcm1480: Remove FSF mail address from GPL noticeDeng-Cheng Zhu2015-04-01
| | | | | | | | | | | | | | | | This is to make checkpatch.pl happy for the next patch. It would otherwise say -- ERROR: Do not include the paragraph about writing to the Free Software Foundation's mailing address from the sample GPL notice. The FSF has changed addresses in the past, and may do so again. Linux already includes a copy of the GPL. Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: linux-mips@linux-mips.org Cc: macro@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9479/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: csrc-r4k: Implement read_sched_clockDeng-Cheng Zhu2015-04-01
| | | | | | | | | | | Use c0 count register for sched_clock source. This implementation will give high resolution cputime accounting. Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: linux-mips@linux-mips.org Cc: macro@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9478/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Add sched_clock supportDeng-Cheng Zhu2015-04-01
| | | | | | | | | | | | This will provide sched_clock interface to implement individual read_sched_clock(). Not for CAVIUM_OCTEON_SOC as it defines its own sched_clock() directly (not using the sched_clock_register interface). Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: linux-mips@linux-mips.org Cc: macro@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9477/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* CLOCKSOURCE: versatile: Add PLAT_VERSATILE dependencyDeng-Cheng Zhu2015-04-01
| | | | | | | | | | | | | | | | | | | GENERIC_SCHED_CLOCK can be selected by architectures other than ARM. The current dependencies of CLKSRC_VERSATILE make it possible that other architectures will have CLKSRC_VERSATILE available in configuration once they select GENERIC_SCHED_CLOCK, whereas this clock source should be solely available to ARM in reality. This patch adds one more dependency to CLKSRC_VERSATILE to fix the issue. Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Reported-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: LKML <linux-kernel@vger.kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9476/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Add support for full dynticks CPU time accountingDeng-Cheng Zhu2015-04-01
| | | | | | | | | | | With the correct cmpxchg64 on 32-bit platforms, we can now add the config HAVE_VIRT_CPU_ACCOUNTING_GEN into arch/mips/Kconfig. Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: linux-mips@linux-mips.org Cc: macro@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9475/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Fall back to generic implementation of cmpxchg64 on 32-bit platformsDeng-Cheng Zhu2015-04-01
| | | | | | | | | | | | | | | | | | This is in preparation of adding HAVE_VIRT_CPU_ACCOUNTING_GEN support in the next patch. Without having cmpxchg64 to use the generic implementation, kernel linking will complain: kernel/built-in.o: In function `cputime_adjust': cputime.c:(.text+0x33748): undefined reference to `__cmpxchg_called_with_bad_pointer' cputime.c:(.text+0x33810): undefined reference to `__cmpxchg_called_with_bad_pointer' Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: linux-mips@linux-mips.org Cc: macro@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9474/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Add SCHED_HRTICK supportDeng-Cheng Zhu2015-04-01
| | | | | | | | | | | | | We have HIGH_RES_TIMERS to support SCHED_HRTICK. But SCHED_HRTICK is in kernel/Kconfig.hz where HZ values unsuitable for MIPS are defined. So we simply add this config in arch/mips/Kconfig as opposed to including the whole kernel/Kconfig.hz. Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: linux-mips@linux-mips.org Cc: macro@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9473/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: OCTEON: Enable little endian kernel.David Daney2015-04-01
| | | | | | | | | | | | | | | Now it is supported, so let people select it. [ralf@linux-mips.org: Folded in fix for bogus CONFIG_ kconfig symbol prefix. Issue reported by Valentin Rothberg <valentinrothberg@gmail.com>.] Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Leonid Rosenboim <lrosenboim@caviumnetworks.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9592/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: OCTEON: Add mach-cavium-octeon/mangle-port.hDavid Daney2015-04-01
| | | | | | | | | | | | Needed for little-endian ioport access. This fixes NOR flash in little-endian mode Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9591/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Octeon: Handle bootloader structures in little-endian mode.David Daney2015-04-01
| | | | | | | | | | | | Compensate for the differences in the layout of in-memory bootloader information as seen from little-endian mode. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9590/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Malta: malta-time: Ensure GIC counter is runningMarkos Chandras2015-03-31
| | | | | | | | | | Start the GIC counter before we try to determine its frequency. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9596/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* CLOCKSOURCE: mips-gic-timer: Ensure GIC counter is runningMarkos Chandras2015-03-31
| | | | | | | | | | | | | Start the GIC counter after configuring the clocksource since there are no guarantees the counter will be running after a CPU reset. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9595/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* IRQCHIP: irq-mips-gic: Add new functions to start/stop the GIC counterMarkos Chandras2015-03-31
| | | | | | | | | | | | | | | | | We add new functions to start and stop the GIC counter since there are no guarantees the counter will be running after a CPU reset. The GIC counter is stopped by setting the 29th bit on the GIC Config register and it is started by clearing that bit. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9594/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* ttyFDC: Implement KGDB IO operations.James Hogan2015-03-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | Implement KGDB IO operations for MIPS Fast Debug Channel (FDC). This can be enabled via Kconfig, which also allows the channel number to be chosen. The magic sysrq hack is implemented in the TTY driver, detecting just ^C for the KGDB channel, and ^O followed by a letter for the FDC console channel. The KGDB operations are reasonably efficient thanks to the flush callback, with a 4 byte buffer being used in both directions to allow up to 4 bytes to be encoded per FDC word. Reading of data for KGDB will discard any data received on other channels, which clearly isn't ideal, but given that there is a single FIFO shared between channels we can't do much better. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: linux-mips@linux-mips.org Cc: kgdb-bugreport@lists.sourceforge.net Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9147/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS, ttyFDC: Add early FDC console supportJames Hogan2015-03-31
| | | | | | | | | | | | | Add support for early console of MIPS Fast Debug Channel (FDC) on channel 1 with a call very early from the MIPS setup_arch(). Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.cz> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9145/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* TTY: Add MIPS EJTAG Fast Debug Channel TTY driverJames Hogan2015-03-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add TTY driver and consoles for the MIPS EJTAG Fast Debug Channel (FDC), which is found on the per-CPU MIPS Common Device Mapped Memory (CDMM) bus. The FDC is a per-CPU device which is used to communicate with an EJTAG probe. RX and TX FIFOs exist, containing 32-bits of data and 4-bit channel numbers. 16 general data streams are implemented on this for TTY and console use by encoding up to 4 bytes on each 32-bit FDC word. The TTY devices are named e.g. /dev/ttyFDC3c2 for channel 2 of the FDC attached to logical CPU 3. These can be used for getting the kernel log, a login prompt, or as a GDB remote transport, all over EJTAG and without needing a serial port. It can have an interrupt to notify of when incoming data is available in the RX FIFO or when the TX FIFO is no longer full. The detection of this interrupt occurs in architecture / platform code, but it may be shared with the timer and/or performance counter interrupt. Due to the per-CPU nature of the hardware, all outgoing TTY data is written out from a kthread which is pinned to the appropriate CPU. The console is not bound to a specific CPU, so output will appear on the chosen channel on whichever CPU the code is executing on. Enable with e.g. console=fdc1 in kernel arguments. /dev/console is bound to the same channel on the boot CPU's FDC if it exists. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.cz> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9146/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: idle: Workaround wait + FDC problemsJames Hogan2015-03-31
| | | | | | | | | | | | | | | | | | | | On certain cores (namely proAptiv and P5600) incoming data via a Fast Debug Channel (FDC) while the core is blocked on a wait instruction will cause the wait not to wake up even when another interrupt is received. This makes an idle target stop as soon as you send FDC data to it, until the debug probe interrupts it and restarts the wait instruction. This is worked around by avoiding using r4k_wait on these cores if CONFIG_MIPS_EJTAG_FDC_TTY is enabled (which would imply the user intends to use the FDC). [ralf@linux-mips.org: Fix conflict.] Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9144/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Malta: Implement get_c0_fdc_int()James Hogan2015-03-31
| | | | | | | | | | | | | Implement the weak get_c0_fdc_int() function for Malta. The Fast Debug Channel (FDC) interrupt is obtained mainly depending on whether a GIC is present. Vectored external interrupt mode isn't yet supported. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9143/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.2 (git 2.25.0) at 2025-01-21 20:14:34 -0500