aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
* bna: Fix for handling firmware heartbeat failureRasesh Mody2011-04-06
| | | | | | | | | This patch contains a fix for gracefully handling firmware heartbeat failure instead of forcing panic. Signed-off-by: Debashis Dutt <ddutt@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* can: mcp251x: Allow pass IRQ flags through platform data.Enric Balletbo i Serra2011-04-06
| | | | | | | | | | | | | | | | When an interrupt occurs, the INT pin is driven low by the MCP251x controller (falling edge) but in some cases the INT pin can be connected to the MPU through a transistor or level translator which inverts this signal. In this case interrupt should be configured in rising edge. This patch adds support to pass the IRQ flags via mcp251x_platform_data. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* smsc911x: fix mac_lock acquision before calling smsc911x_mac_readEnric Balletbo i Serra2011-04-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When SMSC911X_SAVE_MAC_ADDRESS flag is enabled the driver calls smsc911x_mac_read and smsc911x_mac_read function without acquiring mac_lock spinlock This patch fixes following warning smsc911x: Driver version 2008-10-21. ------------[ cut here ]------------ WARNING: at drivers/net/smsc911x.c:261 smsc911x_mac_read+0x24/0x220() Modules linked in: [<c0060858>] (unwind_backtrace+0x0/0xe0) from [<c009322c>] (warn_slowpath_common+0x4c/0x64) [<c009322c>] (warn_slowpath_common+0x4c/0x64) from [<c009325c>] (warn_slowpath_null+0x18/0x1c) [<c009325c>] (warn_slowpath_null+0x18/0x1c) from [<c0324bec>] (smsc911x_mac_read+0x24/0x220) [<c0324bec>] (smsc911x_mac_read+0x24/0x220) from [<c0434788>] (smsc911x_read_mac_address+0x18/0x6c) [<c0434788>] (smsc911x_read_mac_address+0x18/0x6c) from [<c0434c74>] (smsc911x_drv_probe+0x498/0x1788) [<c0434c74>] (smsc911x_drv_probe+0x498/0x1788) from [<c02d3e54>] (platform_drv_probe+0x14/0x18) [<c02d3e54>] (platform_drv_probe+0x14/0x18) from [<c02d2d60>] (driver_probe_device+0xc8/0x184) [<c02d2d60>] (driver_probe_device+0xc8/0x184) from [<c02d2e84>] (__driver_attach+0x68/0x8c) [<c02d2e84>] (__driver_attach+0x68/0x8c) from [<c02d1fc8>] (bus_for_each_dev+0x48/0x74) [<c02d1fc8>] (bus_for_each_dev+0x48/0x74) from [<c02d2660>] (bus_add_driver+0x9c/0x228) [<c02d2660>] (bus_add_driver+0x9c/0x228) from [<c02d3598>] (driver_register+0xa0/0x124) [<c02d3598>] (driver_register+0xa0/0x124) from [<c0050668>] (do_one_initcall+0x94/0x168) [<c0050668>] (do_one_initcall+0x94/0x168) from [<c0008984>] (kernel_init+0xa0/0x154) [<c0008984>] (kernel_init+0xa0/0x154) from [<c005afac>] (kernel_thread_exit+0x0/0x8) ---[ end trace 2c931a35b7885770 ]--- Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2011-04-05
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6
| * netfilter: xt_conntrack: fix inverted conntrack direction testFlorian Westphal2011-04-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | --ctdir ORIGINAL matches REPLY packets, and vv: userspace sets "invert_flags &= ~XT_CONNTRACK_DIRECTION" in ORIGINAL case. Thus: (CTINFO2DIR(ctinfo) == IP_CT_DIR_ORIGINAL) ^ !!(info->invert_flags & XT_CONNTRACK_DIRECTION)) yields "1 ^ 0", which is true -> returns false. Reproducer: iptables -I OUTPUT 1 -p tcp --syn -m conntrack --ctdir ORIGINAL Signed-off-by: Florian Westphal <fwestphal@astaro.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
| * netfilter: xt_addrtype: replace rt6_lookup with nf_afinfo->routeFlorian Westphal2011-04-04
| | | | | | | | | | | | | | | | | | This avoids pulling in the ipv6 module when using (ipv4-only) iptables -m addrtype. Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Patrick McHardy <kaber@trash.net>
| * netfilter: af_info: add 'strict' parameter to limit lookup to .oifFlorian Westphal2011-04-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ipv6 fib lookup can set RT6_LOOKUP_F_IFACE flag to restrict search to an interface, but this flag cannot be set via struct flowi. Also, it cannot be set via ip6_route_output: this function uses the passed sock struct to determine if this flag is required (by testing for nonzero sk_bound_dev_if). Work around this by passing in an artificial struct sk in case 'strict' argument is true. This is required to replace the rt6_lookup call in xt_addrtype.c with nf_afinfo->route(). Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Patrick McHardy <kaber@trash.net>
| * netfilter: af_info: add network namespace parameter to route hookFlorian Westphal2011-04-04
| | | | | | | | | | | | | | | | | | This is required to eventually replace the rt6_lookup call in xt_addrtype.c with nf_afinfo->route(). Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Patrick McHardy <kaber@trash.net>
| * IPVS: fix NULL ptr dereference in ip_vs_ctl.c ip_vs_genl_dump_daemons()Hans Schillstrom2011-04-04
| | | | | | | | | | | | | | | | | | | | | | ipvsadm -ln --daemon will trigger a Null pointer exception because ip_vs_genl_dump_daemons() uses skb_net() instead of skb_sknet(). To prevent others from NULL ptr a check is made in ip_vs.h skb_net(). Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Patrick McHardy <kaber@trash.net>
| * netfilter: h323: bug in parsing of ASN1 SEQOF fieldDavid Sterba2011-04-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Static analyzer of clang found a dead store which appears to be a bug in reading count of items in SEQOF field, only the lower byte of word is stored. This may lead to corrupted read and communication shutdown. The bug has been in the module since it's first inclusion into linux kernel. [Patrick: the bug is real, but without practical consequence since the largest amount of sequence-of members we parse is 30.] Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Patrick McHardy <kaber@trash.net>
| * netfilter: ipset: references are protected by rwlock instead of mutexJozsef Kadlecsik2011-04-04
| | | | | | | | | | | | | | | | | | | | The timeout variant of the list:set type must reference the member sets. However, its garbage collector runs at timer interrupt so the mutex protection of the references is a no go. Therefore the reference protection is converted to rwlock. Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Patrick McHardy <kaber@trash.net>
| * netfilter: ipset: list:set timeout variant fixesJozsef Kadlecsik2011-04-04
| | | | | | | | | | | | | | | | | | | | - the timeout value was actually not set - the garbage collector was broken The variant is fixed, the tests to the ipset testsuite are added. Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Patrick McHardy <kaber@trash.net>
* | ipv6: Don't pass invalid dst_entry pointer to dst_release().Boris Ostrovsky2011-04-04
| | | | | | | | | | | | | | | | | | Make sure dst_release() is not called with error pointer. This is similar to commit 4910ac6c526d2868adcb5893e0c428473de862b5 ("ipv4: Don't ip_rt_put() an error pointer in RAW sockets."). Signed-off-by: Boris Ostrovsky <boris.ostrovsky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | mlx4: fix kfree on error path in new_steering_entry()Mariusz Kozlowski2011-04-04
| | | | | | | | | | | | | | | | On error path kfree() should get pointer to memory allocated by kmalloc() not the address of variable holding it (which is on stack). Signed-off-by: Mariusz Kozlowski <mk@lab.zgora.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
* | tcp: len check is unnecessarily devastating, change to WARN_ONIlpo Järvinen2011-04-02
| | | | | | | | | | | | | | | | | | | | | | All callers are prepared for alloc failures anyway, so this error can safely be boomeranged to the callers domain without super bad consequences. ...At worst the connection might go into a state where each RTO tries to (unsuccessfully) re-fragment with such a mis-sized value and eventually dies. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sctp: malloc enough room for asconf-ack chunkWei Yongjun2011-04-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sometime the ASCONF_ACK parameters can equal to the fourfold of ASCONF parameters, this only happend in some special case: ASCONF parameter is : Unrecognized Parameter (4 bytes) ASCONF_ACK parameter should be: Error Cause Indication parameter (8 bytes header) + Error Cause (4 bytes header) + Unrecognized Parameter (4bytes) Four 4bytes Unrecognized Parameters in ASCONF chunk will cause panic. Pid: 0, comm: swapper Not tainted 2.6.38-next+ #22 Bochs Bochs EIP: 0060:[<c0717eae>] EFLAGS: 00010246 CPU: 0 EIP is at skb_put+0x60/0x70 EAX: 00000077 EBX: c09060e2 ECX: dec1dc30 EDX: c09469c0 ESI: 00000000 EDI: de3c8d40 EBP: dec1dc58 ESP: dec1dc2c DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process swapper (pid: 0, ti=dec1c000 task=c09aef20 task.ti=c0980000) Stack: c09469c0 e1894fa4 00000044 00000004 de3c8d00 de3c8d00 de3c8d44 de3c8d40 c09060e2 de25dd80 de3c8d40 dec1dc7c e1894fa4 dec1dcb0 00000040 00000004 00000000 00000800 00000004 00000004 dec1dce0 e1895a2b dec1dcb4 de25d960 Call Trace: [<e1894fa4>] ? sctp_addto_chunk+0x4e/0x89 [sctp] [<e1894fa4>] sctp_addto_chunk+0x4e/0x89 [sctp] [<e1895a2b>] sctp_process_asconf+0x32f/0x3d1 [sctp] [<e188d554>] sctp_sf_do_asconf+0xf8/0x173 [sctp] [<e1890b02>] sctp_do_sm+0xb8/0x159 [sctp] [<e18a2248>] ? sctp_cname+0x0/0x52 [sctp] [<e189392d>] sctp_assoc_bh_rcv+0xac/0xe3 [sctp] [<e1897d76>] sctp_inq_push+0x2d/0x30 [sctp] [<e18a21b2>] sctp_rcv+0x7a7/0x83d [sctp] [<c077a95c>] ? ipv4_confirm+0x118/0x125 [<c073a970>] ? nf_iterate+0x34/0x62 [<c074789d>] ? ip_local_deliver_finish+0x0/0x194 [<c074789d>] ? ip_local_deliver_finish+0x0/0x194 [<c0747992>] ip_local_deliver_finish+0xf5/0x194 [<c074789d>] ? ip_local_deliver_finish+0x0/0x194 [<c0747a6e>] NF_HOOK.clone.1+0x3d/0x44 [<c0747ab3>] ip_local_deliver+0x3e/0x44 [<c074789d>] ? ip_local_deliver_finish+0x0/0x194 [<c074775c>] ip_rcv_finish+0x29f/0x2c7 [<c07474bd>] ? ip_rcv_finish+0x0/0x2c7 [<c0747a6e>] NF_HOOK.clone.1+0x3d/0x44 [<c0747cae>] ip_rcv+0x1f5/0x233 [<c07474bd>] ? ip_rcv_finish+0x0/0x2c7 [<c071dce3>] __netif_receive_skb+0x310/0x336 [<c07221f3>] netif_receive_skb+0x4b/0x51 [<e0a4ed3d>] cp_rx_poll+0x1e7/0x29c [8139cp] [<c072275e>] net_rx_action+0x65/0x13a [<c0445a54>] __do_softirq+0xa1/0x149 [<c04459b3>] ? __do_softirq+0x0/0x149 <IRQ> [<c0445891>] ? irq_exit+0x37/0x72 [<c040a7e9>] ? do_IRQ+0x81/0x95 [<c07b3670>] ? common_interrupt+0x30/0x38 [<c0428058>] ? native_safe_halt+0xa/0xc [<c040f5d7>] ? default_idle+0x58/0x92 [<c0408fb0>] ? cpu_idle+0x96/0xb2 [<c0797989>] ? rest_init+0x5d/0x5f [<c09fd90c>] ? start_kernel+0x34b/0x350 [<c09fd0cb>] ? i386_start_kernel+0xba/0xc1 Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sctp: fix auth_hmacs field's length of struct sctp_cookieWei Yongjun2011-04-02
|/ | | | | | | | | | auth_hmacs field of struct sctp_cookie is used for store Requested HMAC Algorithm Parameter, and each HMAC Identifier is 2 bytes, so the length should be: SCTP_AUTH_NUM_HMACS * sizeof(__u16) + 2 Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Fix dev dev_ethtool_get_rx_csum() for forced NETIF_F_RXCSUMMichał Mirosław2011-04-01
| | | | | | | | | | | dev_ethtool_get_rx_csum() won't report rx checksumming when it's not changeable and driver is converted to hw_features and friends. Fix this. (dev->hw_features & NETIF_F_RXCSUM) check is dropped - if the ethtool_ops->get_rx_csum is set, then driver is not coverted, yet. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
* usbnet: use eth%d name for known ethernet devicesArnd Bergmann2011-04-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The documentation for the USB ethernet devices suggests that only some devices are supposed to use usb0 as the network interface name instead of eth0. The logic used there, and documented in Kconfig for CDC is that eth0 will be used when the mac address is a globally assigned one, but usb0 is used for the locally managed range that is typically used on point-to-point links. Unfortunately, this has caused a lot of pain on the smsc95xx device that is used on the popular pandaboard without an EEPROM to store the MAC address, which causes the driver to call random_ether_address(). Obviously, there should be a proper MAC addressed assigned to the device, and discussions are ongoing about how to solve this, but this patch at least makes sure that the default interface naming gets a little saner and matches what the user can expect based on the documentation, including for new devices. The approach taken here is to flag whether a device might be a point-to-point link with the new FLAG_POINTTOPOINT setting in the usbnet driver_info. A driver can set both FLAG_POINTTOPOINT and FLAG_ETHER if it is not sure (e.g. cdc_ether), or just one of the two. The usbnet framework only looks at the MAC address for device naming if both flags are set, otherwise it trusts the flag. Signed-off-by: Arnd Bergmann <arnd.bergmann@linaro.org> Tested-by: Andy Green <andy.green@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* starfire: clean up dma_addr_t size testFUJITA Tomonori2011-04-01
| | | | | | | | Now we have CONFIG_ARCH_DMA_ADDR_T_64BIT. We can fix the hacky dma_addr_t size test cleanly. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2011-04-01
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
| * iwlegacy: fix bugs in change_interfaceJohannes Berg2011-03-29
| | | | | | | | | | | | | | | | | | | | | | | | | | If change_interface gets invoked during a firmware restart, it may crash; prevent that from happening by checking if ctx->vif is assigned. Additionally, in my initial commit I forgot to set the vif->p2p variable correctly, so fix that too. Cc: stable@kernel.org [2.6.38+] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * carl9170: Fix tx aggregation problems with some clientsChristian Lamparter2011-03-29
| | | | | | | | | | | | | | | | | | | | | | | | | | Some clients seem to rely upon the reception of BlockAckReqs to flush their rx reorder buffer. In order to fix aggregation for these clients carl9170 should set IEEE80211_TX_STAT_AMPDU_NO_BACK to generate a BlockAckReq if the transmission of an AMPDU subframe fails. This fixes aggregation problems with Intel 5100 Windows STAs (and maybe others as well). Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwl3945: disable hw scan by defaultStanislaw Gruszka2011-03-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After new NetworkManager 0.8.996 changes, hardware scanning is causing microcode errors as reported here: https://bugzilla.redhat.com/show_bug.cgi?id=683571 and sometimes kernel crashes: https://bugzilla.redhat.com/show_bug.cgi?id=688252 Also with hw scan there are very bad performance on some systems as reported here: https://bugzilla.redhat.com/show_bug.cgi?id=671366 Since Intel no longer supports 3945, there is no chance to get proper firmware fixes, we need workaround problems by disable hardware scanning by default. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * wireless: rt2x00: rt2800usb.c add and identify idsXose Vazquez Perez2011-03-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | taken from staging/rt2860 0x0411,0x016f de37cd49b5a54facef174cf34496919857436e8f MelCo(Buffalo) WLI-UC-G301N 0x050d,0x825b 12840c63b0679f7fab88ea1cc26b52db8b574ce7 Belkin F5D8055 0x050d,0x935a 705059a670f3af2b37695e82de0ee58e75e656ed Belkin F6D4050 v1 0x050d,0x935b 5d92fe3387d086fc2f10426fbdb6b86d6cce5a47 Belkin F6D4050 v2 identifed from ralink driverss 0x0930,0x0a07 RT35xx TOSHIBA 2010_1215_RT3572_Linux_STA_v2.5.0.0.DPO 0x1d4d,0x0011 3072 Pegatron 2011_0107_RT3070_RT3370_Linux_STA_v2.5.0.1_DPO Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwl3945: do not deprecate software scanStanislaw Gruszka2011-03-29
| | | | | | | | | | | | | | | | | | Software scanning can be used for workaround some performance problems, so do not deprecate it. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mac80211: fix aggregation frame release during timeoutDaniel Halperin2011-03-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Suppose the aggregation reorder buffer looks like this: x-T-R1-y-R2, where x and y are frames that have not been received, T is a received frame that has timed out, and R1,R2 are received frames that have not yet timed out. The proper behavior in this scenario is to move the window past x (skipping it), release T and R1, and leave the window at y until y is received or R2 times out. As written, this code will instead leave the window at R1, because it has not yet timed out. Fix this by exiting the reorder loop only when the frame that has not timed out AND there are skipped frames earlier in the current valid window. Signed-off-by: Daniel Halperin <dhalperi@cs.washington.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * cfg80211: fix BSS double-unlinking (continued)Juuso Oikarinen2011-03-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds to the fix "fix BSS double-unlinking" (commit 3207390a8b58bfc1335750f91cf6783c48ca19ca) by Johannes Berg. It turns out, that the double-unlinking scenario can also occur if expired BSS elements are removed whilst an interface is performing association. To work around that, replace list_del with list_del_init also in the "cfg80211_bss_expire" function, so that the check for whether the BSS still is in the list works correctly in cfg80211_unlink_bss. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * cfg80211:: fix possible NULL pointer dereferenceMariusz Kozlowski2011-03-28
| | | | | | | | | | | | | | | | | | In cfg80211_inform_bss_frame() wiphy is first dereferenced on privsz initialisation and then it is checked for NULL. This patch fixes that. Signed-off-by: Mariusz Kozlowski <mk@lab.zgora.pl> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mac80211: fix possible NULL pointer dereferenceMariusz Kozlowski2011-03-28
| | | | | | | | | | | | | | | | | | This patch moves 'key' dereference after BUG_ON(!key) so that when key is NULL we will see proper trace instead of oops. Signed-off-by: Mariusz Kozlowski <mk@lab.zgora.pl> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mac80211: fix NULL pointer dereference in ieee80211_key_alloc()Petr Štetiar2011-03-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ieee80211_key struct can be kfree()d several times in the function, for example if some of the key setup functions fails beforehand, but there's no check if the struct is still valid before we call memcpy() and INIT_LIST_HEAD() on it. In some cases (like it was in my case), if there's missing aes-generic module it could lead to the following kernel OOPS: Unable to handle kernel NULL pointer dereference at virtual address 0000018c .... PC is at memcpy+0x80/0x29c ... Backtrace: [<bf11c5e4>] (ieee80211_key_alloc+0x0/0x234 [mac80211]) from [<bf1148b4>] (ieee80211_add_key+0x70/0x12c [mac80211]) [<bf114844>] (ieee80211_add_key+0x0/0x12c [mac80211]) from [<bf070cc0>] (__cfg80211_set_encryption+0x2a8/0x464 [cfg80211]) Signed-off-by: Petr Štetiar <ynezz@true.cz> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: fix a chip wakeup related crash in ath9k_startFelix Fietkau2011-03-28
| | | | | | | | | | | | | | | | | | When the chip is still asleep when ath9k_start is called, ath9k_hw_configpcipowersave can trigger a data bus error. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mac80211: fix a crash in minstrel_ht in HT mode with no supported MCS ratesFelix Fietkau2011-03-28
| | | | | | | | | | | | | | | | | | | | | | When a client connects in HT mode but does not provide any valid MCS rates, the function that finds the next sample rate gets stuck in an infinite loop. Fix this by falling back to legacy rates if no usable MCS rates are found. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * Bluetooth: Fix warning with hci_cmd_timerThomas Gleixner2011-03-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After we made debugobjects working again, we got the following: WARNING: at lib/debugobjects.c:262 debug_print_object+0x8e/0xb0() Hardware name: System Product Name ODEBUG: free active (active state 0) object type: timer_list hint: hci_cmd_timer+0x0/0x60 Pid: 2125, comm: dmsetup Tainted: G W 2.6.38-06707-gc62b389 #110375 Call Trace: [<ffffffff8104700a>] warn_slowpath_common+0x7a/0xb0 [<ffffffff810470b6>] warn_slowpath_fmt+0x46/0x50 [<ffffffff812d3a5e>] debug_print_object+0x8e/0xb0 [<ffffffff81bd8810>] ? hci_cmd_timer+0x0/0x60 [<ffffffff812d4685>] debug_check_no_obj_freed+0x125/0x230 [<ffffffff810f1063>] ? check_object+0xb3/0x2b0 [<ffffffff810f3630>] kfree+0x150/0x190 [<ffffffff81be4d06>] ? bt_host_release+0x16/0x20 [<ffffffff81be4d06>] bt_host_release+0x16/0x20 [<ffffffff813a1907>] device_release+0x27/0xa0 [<ffffffff812c519c>] kobject_release+0x4c/0xa0 [<ffffffff812c5150>] ? kobject_release+0x0/0xa0 [<ffffffff812c61f6>] kref_put+0x36/0x70 [<ffffffff812c4d37>] kobject_put+0x27/0x60 [<ffffffff813a21f7>] put_device+0x17/0x20 [<ffffffff81bda4f9>] hci_free_dev+0x29/0x30 [<ffffffff81928be6>] vhci_release+0x36/0x70 [<ffffffff810fb366>] fput+0xd6/0x1f0 [<ffffffff810f8fe6>] filp_close+0x66/0x90 [<ffffffff810f90a9>] sys_close+0x99/0xf0 [<ffffffff81d4c96b>] system_call_fastpath+0x16/0x1b That timer was introduced with commit 6bd32326cda(Bluetooth: Use proper timer for hci command timout) Timer seems to be running when the thing is closed. Removing the timer unconditionally fixes the problem. And yes, it needs to be fixed before the HCI_UP check. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
| * Bluetooth: delete hanging L2CAP channelAndrei Emeltchenko2011-03-24
| | | | | | | | | | | | | | | | Sometimes L2CAP connection remains hanging. Make sure that L2CAP channel is deleted. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
| * Bluetooth: Fix missing hci_dev_lock_bh in user_confirm_replyJohan Hedberg2011-03-24
| | | | | | | | | | | | | | | | The code was correctly calling _unlock at the end of the function but there was no actual _lock call anywhere. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
| * Bluetooth: Fix sending LE data over USBVinicius Costa Gomes2011-03-24
| | | | | | | | | | | | | | | | | | Now that we have support for LE connections, before discarding a frame we must check if there's a LE connection over that transport. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Acked-by: Ville Tervo <ville.tervo@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
| * Bluetooth: Fix HCI_RESET command synchronizationGustavo F. Padovan2011-03-24
| | | | | | | | | | | | | | | | | | | | | | | | | | We can't send new commands before a cmd_complete for the HCI_RESET command shows up. Reported-by: Mikko Vinni <mmvinni@yahoo.com> Reported-by: Justin P. Mattock <justinmattock@gmail.com> Reported-by: Ed Tomlinson <edt@aei.ca> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Tested-by: Justin P. Mattock <justinmattock@gmail.com> Tested-by: Mikko Vinni <mmvinni@yahoo.com> Tested-by: Ed Tomlinson <edt@aei.ca>
| * Bluetooth: Increment unacked_frames count only the first transmitSuraj Sumangala2011-03-24
| | | | | | | | | | | | | | | | | | | | | | This patch lets 'l2cap_pinfo.unacked_frames' be incremented only the first time a frame is transmitted. Previously it was being incremented for retransmitted packets too resulting the value to cross the transmit window size. Signed-off-by: Suraj Sumangala <suraj@atheros.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
| * Bluetooth: add support for Apple MacBook Pro 8,2Marc-Antoine Perennou2011-03-24
| | | | | | | | | | | | | | Just adding the vendor details makes it work fine. Signed-off-by: Marc-Antoine Perennou <Marc-Antoine@Perennou.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
* | appletalk: Fix OOPS in atalk_release().David S. Miller2011-03-31
| | | | | | | | | | | | | | | | | | | | | | | | Commit 60d9f461a20ba59219fdcdc30cbf8e3a4ad3f625 ("appletalk: remove the BKL") added a dereference of "sk" before checking for NULL in atalk_release(). Guard the code block completely, rather than partially, with the NULL check. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | mlx4: Fixing bad size of event queue bufferYevgeny Petrilin2011-03-31
| | | | | | | | | | | | | | | | | | | | We should reduce the number of reserved completion queues from the total number of entries. Since the queue size is power of two, not reducing the reserved entries, caused a double queue size, which may lead to allocation failures in some cases. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* | mlx4: Fixing use after freeYevgeny Petrilin2011-03-31
| | | | | | | | | | | | | | | | | | | | | | In case of allocation failure, tried to use the promiscuous QP entry that was previously freed. Now freeing this entry only in case we will not put it back to the list of promiscuous entries. Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bonding:typo in commentPeter Pan(潘卫平)2011-03-31
| | | | | | | | | | | | | | use accumulates instead of acumulates. Signed-off-by: Pan Weiping <panweiping3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sctp: Pass __GFP_NOWARN to hash table allocation attempts.David S. Miller2011-03-30
| | | | | | | | | | | | | | | | | | | | Like DCCP and other similar pieces of code, there are mechanisms here to try allocating smaller hash tables if the allocation fails. So pass in __GFP_NOWARN like the others do instead of emitting a scary message. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | connector: convert to synchronous netlink message processingPatrick McHardy2011-03-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commits 01a16b21 (netlink: kill eff_cap from struct netlink_skb_parms) and c53fa1ed (netlink: kill loginuid/sessionid/sid members from struct netlink_skb_parms) removed some members from struct netlink_skb_parms that depend on the current context, all netlink users are now required to do synchronous message processing. connector however queues received messages and processes them in a work queue, which is not valid anymore. This patch converts connector to do synchronous message processing by invoking the registered callback handler directly from the netlink receive function. In order to avoid invoking the callback with connector locks held, a reference count is added to struct cn_callback_entry, the reference is taken when finding a matching callback entry on the device's queue_list and released after the callback handler has been invoked. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* | fib: add rtnl locking in ip_fib_net_exitEric Dumazet2011-03-30
| | | | | | | | | | | | | | | | | | Daniel J Blueman reported a lockdep splat in trie_firstleaf(), caused by RTNL being not locked before a call to fib_table_flush() Reported-by: Daniel J Blueman <daniel.blueman@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | atm/solos-pci: Don't flap VCs when carrier state changesPhilip A. Prindeville2011-03-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Don't flap VCs when carrier state changes; higher-level protocols can detect loss of connectivity and act accordingly. This is more consistent with how other network interfaces work. We no longer use release_vccs() so we can delete it. release_vccs() was duplicated from net/atm/common.c; make the corresponding function exported, since other code duplicates it and could leverage it if it were public. Signed-off-by: Philip A. Prindeville <philipp@redfish-solutions.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | atm/solos-pci: Don't include frame pseudo-header on transmit hex-dumpPhilip A. Prindeville2011-03-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Omit pkt_hdr preamble when dumping transmitted packet as hex-dump; we can pull this up because the frame has already been sent, and dumping it is the last thing we do with it before freeing it. Also include the size, vpi, and vci in the debug as is done on receive. Use "port" consistently instead of "device" intermittently. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | atm/solos-pci: Use VPI.VCI notation uniformly.Philip A. Prindeville2011-03-30
| | | | | | | | | | | | | | | | Use VPI.VCI notation consistently throughout the module. This is the one remaining place where the VCI is used before the VPI in any output. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-11 12:59:29 -0500