aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
* AF_RAW: Augment raw_send_hdrinc to expand skb to fit iphdr->ihl (v2)Neil Horman2009-10-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Augment raw_send_hdrinc to correct for incorrect ip header length values A series of oopses was reported to me recently. Apparently when using AF_RAW sockets to send data to peers that were reachable via ipsec encapsulation, people could panic or BUG halt their systems. I've tracked the problem down to user space sending an invalid ip header over an AF_RAW socket with IP_HDRINCL set to 1. Basically what happens is that userspace sends down an ip frame that includes only the header (no data), but sets the ip header ihl value to a large number, one that is larger than the total amount of data passed to the sendmsg call. In raw_send_hdrincl, we allocate an skb based on the size of the data in the msghdr that was passed in, but assume the data is all valid. Later during ipsec encapsulation, xfrm4_tranport_output moves the entire frame back in the skbuff to provide headroom for the ipsec headers. During this operation, the skb->transport_header is repointed to a spot computed by skb->network_header + the ip header length (ihl). Since so little data was passed in relative to the value of ihl provided by the raw socket, we point transport header to an unknown location, resulting in various crashes. This fix for this is pretty straightforward, simply validate the value of of iph->ihl when sending over a raw socket. If (iph->ihl*4U) > user data buffer size, drop the frame and return -EINVAL. I just confirmed this fixes the reported crashes. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2009-10-29
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
| * MAINTAINERS: rt2x00 list is moderatedBartlomiej Zolnierkiewicz2009-10-27
| | | | | | | | | | | | Cc: users@rt2x00.serialmonkey.com Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * airo: Reorder tests, check bounds before elementRoel Kluin2009-10-27
| | | | | | | | | | | | | | Test whether index is within bounds before reading the element Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mac80211: fix for incorrect sequence number on hostapd injected framesBjörn Smedman2009-10-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When hostapd injects a frame, e.g. an authentication or association response, mac80211 looks for a suitable access point virtual interface to associate the frame with based on its source address. This makes it possible e.g. to correctly assign sequence numbers to the frames. A small typo in the ethernet address comparison statement caused a failure to find a suitable ap interface. Sequence numbers on such frames where therefore left unassigned causing some clients (especially windows-based 11b/g clients) to reject them and fail to authenticate or associate with the access point. This patch fixes the typo in the address comparison statement. Signed-off-by: Björn Smedman <bjorn.smedman@venatech.se> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * libertas spi: fix sparse errorsHolger Schurig2009-10-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes the following sparse warnings: $ make modules SUBDIRS=drivers/net/wireless/libertas C=1 CF=-D__CHECK_ENDIAN__ make: Entering directory `/usr/src/linux-wl' CHECK drivers/net/wireless/libertas/if_spi.c drivers/net/wireless/libertas/if_spi.c:137:16: warning: incorrect type in initializer (different base types) drivers/net/wireless/libertas/if_spi.c:137:16: expected unsigned short [unsigned] [usertype] reg_out drivers/net/wireless/libertas/if_spi.c:137:16: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:191:16: warning: incorrect type in initializer (different base types) drivers/net/wireless/libertas/if_spi.c:191:16: expected unsigned short [unsigned] [usertype] reg_out drivers/net/wireless/libertas/if_spi.c:191:16: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:256:24: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/libertas/if_spi.c:256:24: expected restricted __le32 const [usertype] *p drivers/net/wireless/libertas/if_spi.c:256:24: got unsigned int *<noident> drivers/net/wireless/libertas/if_spi.c:243:24: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/libertas/if_spi.c:243:24: expected restricted __le16 const [usertype] *p drivers/net/wireless/libertas/if_spi.c:243:24: got unsigned short *<noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:243:24: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/libertas/if_spi.c:243:24: expected restricted __le16 const [usertype] *p drivers/net/wireless/libertas/if_spi.c:243:24: got unsigned short *<noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:243:24: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/libertas/if_spi.c:243:24: expected restricted __le16 const [usertype] *p drivers/net/wireless/libertas/if_spi.c:243:24: got unsigned short *<noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:243:24: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/libertas/if_spi.c:243:24: expected restricted __le16 const [usertype] *p drivers/net/wireless/libertas/if_spi.c:243:24: got unsigned short *<noident> drivers/net/wireless/libertas/if_spi.c:243:24: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/libertas/if_spi.c:243:24: expected restricted __le16 const [usertype] *p drivers/net/wireless/libertas/if_spi.c:243:24: got unsigned short *<noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:243:24: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/libertas/if_spi.c:243:24: expected restricted __le16 const [usertype] *p drivers/net/wireless/libertas/if_spi.c:243:24: got unsigned short *<noident> Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mac80211: trivial: fix spelling in mesh_hwmpAndrey Yurovsky2009-10-27
| | | | | | | | | | | | | | | | Fix a typo in the description of hwmp_route_info_get(), no function changes. Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * cfg80211: sme: deauthenticate on assoc failureJohannes Berg2009-10-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When the in-kernel SME gets an association failure from the AP we don't deauthenticate, and thus get into a very confused state which will lead to warnings later on. Fix this by actually deauthenticating when the AP indicates an association failure. (Brought to you by the hacking session at Kernel Summit 2009 in Tokyo, Japan. -- JWL) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mac80211: keep auth state when assoc failsJohannes Berg2009-10-27
| | | | | | | | | | | | | | | | | | | | | | | | | | When association fails, we should stay authenticated, which in mac80211 is represented by the existence of the mlme work struct, so we cannot free that, instead we need to just set it to idle. (Brought to you by the hacking session at Kernel Summit 2009 in Tokyo, Japan. -- JWL) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mac80211: fix ibss joiningReinette Chatre2009-10-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recent commit "mac80211: fix logic error ibss merge bssid check" fixed joining of ibss cell when static bssid is provided. In this case ifibss->bssid is set before the cell is joined and comparing that address to a bss should thus always succeed. Unfortunately this change broke the other case of joining a ibss cell without providing a static bssid where the value of ifibss->bssid is not set before the cell is joined. Since ifibss->bssid may be set before or after joining the cell we do not learn anything by comparing it to a known bss. Remove this check. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * b43: add 'struct b43_wl' missing declarationMiguel Boton2009-10-27
| | | | | | | | | | | | | | | | 'struct b43_wl' declaration is missing at 'leds.h'. It should be declared to avoid getting some GCC warnings at 'b43_leds_unregister'. Signed-off-by: Miguel Botón <mboton@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * b43: Fix Bugzilla #14181 and the bug from the previous 'fix'Larry Finger2009-10-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | "b43: Fix PPC crash in rfkill polling on unload" fixed the bug reported in Bugzilla No. 14181; however, it introduced a new bug. Whenever the radio switch was turned off, it was necessary to unload and reload the driver for it to recognize the switch again. This patch fixes both the original bug in #14181 and the bug introduced by the previous patch. It must be stated, however, that if there is a BCM4306/3 with an rfkill switch (not yet proven), then the driver will need an unload/reload cycle to turn the device back on. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * rt2x00: Fix crypto in TX frame for rt2800usbBenoit PAPILLAULT2009-10-27
| | | | | | | | | | | | Signed-off-by: Benoit PAPILLAULT <benoit.papillault@free.fr> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | bonding: fix a race condition in calls to slave MII ioctlsJiri Bohac2009-10-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In mii monitor mode, bond_check_dev_link() calls the the ioctl handler of slave devices. It stores the ndo_do_ioctl function pointer to a static (!) ioctl variable and later uses it to call the handler with the IOCTL macro. If another thread executes bond_check_dev_link() at the same time (even with a different bond, which none of the locks prevent), a race condition occurs. If the two racing slaves have different drivers, this may result in one driver's ioctl handler being called with a pointer to a net_device controlled with a different driver, resulting in unpredictable breakage. Unless I am overlooking something, the "static" must be a copy'n'paste error (?). Signed-off-by: Jiri Bohac <jbohac@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
* | virtio-net: fix data corruption with OOMMichael S. Tsirkin2009-10-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | virtio net used to unlink skbs from send queues on error, but ever since 48925e372f04f5e35fec6269127c62b2c71ab794 we do not do this. This causes guest data corruption and crashes with vhost since net core can requeue the skb or free it without it being taken off the list. This patch fixes this by queueing the skb after successful transmit. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sfc: Set ip_summed correctly for page buffers passed to GROBen Hutchings2009-10-28
| | | | | | | | | | | | | | | | | | | | Page buffers containing packets with an incorrect checksum or using a protocol not handled by hardware checksum offload were previously not passed to LRO. The conversion to GRO changed this, but did not set the ip_summed value accordingly. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | cnic: Fix L2CTX_STATUSB_NUM offset in context memory.Michael Chan2009-10-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The BNX2_L2CTX_STATUSB_NUM definition needs to be changed to match the recent firmware update: commit 078b0735881c7969aaf21469f3577831cddd9f8c bnx2: Update firmware to 5.0.0.j3. Without the fix, bnx2 can crash intermittently in bnx2_rx_int() when iSCSI is enabled. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sh_eth: Add asm/cacheflush.hNobuhiro Iwamatsu2009-10-26
| | | | | | | | | | | | | | | | Add include asm/cacheflush.h, because declaration of __flush_purge_region moved to asm/cacheflush.h. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | PPPoE: Fix flush/close races.Michal Ostrowski2009-10-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Be more careful about the state of pointers during tear-down. The "pppoe_dev" field can only be looked at safely while holding socket locks. This subsequently allows for the flush_lock to be killed. We depend on the PPPOX_CONNECTED state to tell us that that those fields are valid, so whoever clears that state (pppox_unbind_sock()) is responsible for the dev_put() call. We also have to ensure that we delete_item() on all sockets before they are cleaned up. The need for these changes has been exposed by scenarios wherein namespace bindings of ethernet devices change while there are ongoing PPPoE sessions, which resulted in oopses due to unusual socket connection termination paths, exposing these issues. Signed-off-by: Michal Ostrowski <mostrows@gmail.com> Reviewed-by: Cyril Gorcunov <gorcunov@gmail.com> Reported-by: Denys Fedoryschenko <denys@visp.net.lb> Tested-by: Denys Fedoryschenko <denys@visp.net.lb>
* | e1000e: allow for swflag to be held over consecutive PHY accessesBruce Allan2009-10-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PCH-based parts (82577/82578) and some ICH8-based parts (82566) need to hold the swflag (sw/fw/hw hardware semaphore) over consecutive PHY accesses in order to perform sw-driven PHY configuration during initialization to workaround known hardware issues (see follow-on patch). This patch provides new PHY read/write functions (and function pointers) that will allow accessing the PHY registers assuming the swflag has already been acquired. The actual PHY register access code has moved into helper functions that are called with a flag indicating whether or not the swflag has already been acquired and acquires/releases it if not. The functions called from within the updated PHY access functions had to be updated to assume the swflag was already acquired, and other functions that called those functions were also updated to acquire/release the swflag. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | e1000e: separate mutex usage between NVM and PHY/CSR register for ICHx/PCHBruce Allan2009-10-26
| | | | | | | | | | | | | | | | | | | | | | | | | | Accesses to NVM and PHY/CSR registers on ICHx/PCH-based parts are protected from concurrent accesses with a mutex that is acquired when the access is initiated and released when the access has completed. However, the two types of accesses should not be protected by the same mutex because the driver may have to access the NVM while already holding the mutex over several consecutive PHY/CSR accesses which would result in livelock. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | e1000e: 82577/82578 requires a different method to configure LPLUBruce Allan2009-10-26
| | | | | | | | | | | | | | | | | | | | Unlike previous ICHx-based parts, the PCH-based parts (82577/82578) require LPLU (Low Power Link Up, or "reverse auto-negotiation") to be configured in the PHY rather than the MAC. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | e1000e: increase swflag acquisition timeout for ICHx/PCHBruce Allan2009-10-26
| | | | | | | | | | | | | | | | | | | | | | | | In some conditions (e.g. when AMT is enabled on the system), it is possible to take an extended period of time to for the driver to acquire the sw/fw/hw hardware semaphore used to protect against concurrent access of a shared resource (e.g. PHY registers). This could cause PHY registers to not get configured properly resulting in link issues. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | e1000e: clear PHY wakeup bit after LCD reset on 82577/82578Bruce Allan2009-10-26
| | | | | | | | | | | | | | | | | | | | Performing a dummy read of the PHY Wakeup Control (WUC) register clears the wakeup enable bit set by an PHY reset. If this bit remains set, link problems may occur. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | igbvf: fix memory leak when ring size changed while interface downAlexander Duyck2009-10-26
| | | | | | | | | | | | | | | | | | This patch resolves a memory leak which occurs while changing the ring size while the interface is down. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ixgbe: fix memory leak when resizing rings while interface is downAlexander Duyck2009-10-26
| | | | | | | | | | | | | | | | | | This patch resolves a memory leak that occurs when you resize the rings via the ethtool -G option while the interface is down. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | igb: fix memory leak when setting ring size while interface is downAlexander Duyck2009-10-26
| | | | | | | | | | | | | | | | | | | | | | | | Changing ring sizes while the interface was down was causing a double allocation of the receive and transmit rings. This issue is amplified when there are multiple rings enabled. To prevent this we need to add an additional check which will just update the ring counts when the interface is not up and skip the allocation steps. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bonding: Modify hash transmit policies to use the packet's source MAC addressJasper Spaans2009-10-24
|/ | | | | | | | | | | | Modify bonding hash transmit policies to use the psource MAC address of the packet instead of the MAC address configured for the bonding device. The old sitation conflicts with the documentation. Signed-off-by: Jasper Spaans <spaans@fox-it.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* pktgen: Dont leak kernel memoryEric Dumazet2009-10-24
| | | | | | | | | | | | While playing with pktgen, I realized IP ID was not filled and a random value was taken, possibly leaking 2 bytes of kernel memory. We can use an increasing ID, this can help diagnostics anyway. Also clear packet payload, instead of leaking kernel memory. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* DM9000: Fix revision ID for DM9000BBen Dooks2009-10-24
| | | | | | | | | | | The DM9000B revision ID is 0x1A, not 0x1B as set in the curernt dm9000.h header. Fix bug reported by Paolo Zebelloni. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Simtec Linux Team <linux@simtec.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: fix Ethernet Hangup for RTL8110SC rev dSimon Wunderlich2009-10-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The 8110SC rev d chip on our board shows a regression which the 8110SB chip did not have. When inbound traffic is overflowing the receive descriptor queue, "holes" in the ring buffer may occur which lead to a hangup until the buffer is filled again. The packets are than completely processed, but the ring remains porous and no packets are processed until the next overflow. Setting the interface down and up can fix the problem temporary from userspace. For some reason we don't know, this behaviour is not occuring if the RxVlan bit for hardware VLAN untagging is set. There is another "Work around for AMD plateform" in the current code which checks the VLAN status word in receive descriptors, but does never come to effect when hardware VLAN support is enabled. We assume that this is a bug in the chip. The following patch fixes the problem. Without the patch we could reproduce the hang within minutes (given other devices also generating lots of interrupts), without we couldn't reproduce within a few days of long term testing. This version contains minor style adjustments and is sent with mutt which will hopefully not destroy the formatting again. Signed-off-by: Bernhard Schmidt <bernhard.schmidt@saxnet.de> Signed-off-by: Simon Wunderlich <simon.wunderlich@saxnet.de> Acked-by: Francois Romieu <romieu@zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ifb: should not use __dev_get_by_index() without locksEric Dumazet2009-10-23
| | | | | | | | At this point (ri_tasklet()), RTNL or dev_base_lock are not held, we must use dev_get_by_index() instead of __dev_get_by_index() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: au1000_eth: add missing capability.hManuel Lauss2009-10-23
| | | | | | | | | | | | | fixes the following build failure: CC drivers/net/au1000_eth.o /drivers/net/au1000_eth.c: In function 'au1000_set_settings': /drivers/net/au1000_eth.c:623: error: implicit declaration of function 'capable' /drivers/net/au1000_eth.c:623: error: 'CAP_NET_ADMIN' undeclared (first use in this function) /drivers/net/au1000_eth.c:623: error: (Each undeclared identifier is reported only once /drivers/net/au1000_eth.c:623: error: for each function it appears in. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* myri10ge: improve port type reporting in ethtoolBrice Goglin2009-10-23
| | | | | | | | | Improve the reporting of myri10ge port type in ethtool, and update for new boards. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Andrew Gallatin <gallatin@myri.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: use WARN() for the WARN_ON in commit b6b39e8f3fbbbArjan van de Ven2009-10-23
| | | | | | | | | | | | Commit b6b39e8f3fbbb (tcp: Try to catch MSG_PEEK bug) added a printk() to the WARN_ON() that's in tcp.c. This patch changes this combination to WARN(); the advantage of WARN() is that the printk message shows up inside the message, so that kerneloops.org will collect the message. In addition, this gets rid of an extra if() statement. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000e: reset the PHY on 82577/82578 when going to SxBruce Allan2009-10-23
| | | | | | | | | | | | The PHY on 82577/82578 parts needs a soft reset when transitioning to Sx state in order for the PHY write which disables gigabit speed to take effect. Gigabit speed must be disabled in order for the PHY writes to registers on page 800 (the wakeup control registers) to work as expected otherwise the system might not wake via WoL. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* isdn: fix possible circular locking dependencyXiaotian Feng2009-10-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There's a circular locking dependency: ---> isdn_net_get_locked_lp     --->lock &nd->queue_lock     --->lock &nd->queue->xmit_lock     .....................     ---->unlock &nd->queue_lock ---> isdn_net_writebuf_skb (called with &nd->queue->xmit_lock locked)     ---->isdn_net_inc_frame_cnt          ---->isdn_net_device_busy               ----> lock &nd->queue_lock This will trigger lockdep warnings:  =======================================================  [ INFO: possible circular locking dependency detected ]  2.6.32-rc4-testing #7  -------------------------------------------------------  ipppd/28379 is trying to acquire lock:  (&netdev->queue_lock){......}, at: [<e62ad0fd>] isdn_net_device_busy+0x2c/0x74 [isdn]  but task is already holding lock:  (&netdev->local->xmit_lock){+.....}, at: [<e62aefc2>] isdn_net_write_super+0x3f/0x6e [isdn]  which lock already depends on the new lock. ....... We don't need to lock nd->queue->xmit_lock to protect single isdn_net_lp_busy(). This can fix above lockdep warnings. Reported-and-tested-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: Xiaotian Feng <xtfeng@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netxen: avoid undue board config checkDhananjay Phadke2009-10-22
| | | | | | | | | | Old code assumed board config version in the flash to be 1. When this will get changed by tools, driver just refuses to attach. This is unnecessary since driver does not have to parse board config structure directly (maintained by firmware). Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netxen: fix tx timeout handling on firmware hangAmit Kumar Salecha2009-10-22
| | | | | | | | | | Clear NX_RESETING bit in netxen_tx_timeout_task() so that the firmware watchdog task can catch need_reset request from tx timeout. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netxen: fix i2c initDhananjay Phadke2009-10-22
| | | | | | | | Avoid resetting subsys ID in i2c block. Also remove duplicate check for address tranlsation error. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* niu: VLAN_ETH_HLEN should be used to make sure that the whole MAC header was ↵Joyce Yu2009-10-21
| | | | | | | copied to the head buffer in the Vlan packets case Signed-off-by: Joyce Yu <joyce.yu@sun.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* KS8851: Fix ks8851_set_rx_mode() for IFF_MULTICASTBen Dooks2009-10-20
| | | | | | | | | | | | | | | In ks8851_set_rx_mode() the case handling IFF_MULTICAST was also setting the RXCR1_AE bit by accident. This meant that all unicast frames where being accepted by the device. Remove RXCR1_AE from this case. Note, RXCR1_AE was also masking a problem with setting the MAC address properly, so needs to be applied after fixing the MAC write order. Fixes a bug reported by Doong, Ping of Micrel. This version of the patch avoids setting RXCR1_ME for all cases. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* KS8851: Fix MAC address write orderBen Dooks2009-10-20
| | | | | | | | | | | | The MAC address register was being written in the wrong order, so add a new address macro to convert mac-address byte to register address and a ks8851_wrreg8() function to write each byte without having to worry about any difficult byte swapping. Fixes a bug reported by Doong, Ping of Micrel. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* KS8851: Add soft reset at probe timeBen Dooks2009-10-20
| | | | | | | | | | | | Issue a full soft reset at probe time. This was reported by Doong Ping of Micrel, but no explanation of why this is necessary or what bug it is fixing. Add it as it does not seem to hurt the current driver and ensures that the device is in a known state when we start setting it up. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: fix section mismatch in fec.cSteven King2009-10-20
| | | | | | | | fec_enet_init is called by both fec_probe and fec_resume, so it shouldn't be marked as __init. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Fix struct inet_timewait_sock bitfield annotationEric Dumazet2009-10-20
| | | | | | | | | | | commit 9e337b0f (net: annotate inet_timewait_sock bitfields) added 4/8 bytes in struct inet_timewait_sock. Fix this by declaring tw_ipv6_offset in the 'flags' bitfield The 14 bits hole is named tw_pad to make it cleary apparent. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tcp: Try to catch MSG_PEEK bugHerbert Xu2009-10-20
| | | | | | | | | This patch tries to print out more information when we hit the MSG_PEEK bug in tcp_recvmsg. It's been around since at least 2005 and it's about time that we finally fix it. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Fix IP_MULTICAST_IFEric Dumazet2009-10-20
| | | | | | | | | | | | | | | ipv4/ipv6 setsockopt(IP_MULTICAST_IF) have dubious __dev_get_by_index() calls. This function should be called only with RTNL or dev_base_lock held, or reader could see a corrupt hash chain and eventually enter an endless loop. Fix is to call dev_get_by_index()/dev_put(). If this happens to be performance critical, we could define a new dev_exist_by_index() function to avoid touching dev refcount. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bluetooth: static lock key fixDave Young2009-10-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When shutdown ppp connection, lockdep waring about non-static key will happen, it is caused by the lock is not initialized properly at that time. Fix with tuning the lock/skb_queue_head init order [ 94.339261] INFO: trying to register non-static key. [ 94.342509] the code is fine but needs lockdep annotation. [ 94.342509] turning off the locking correctness validator. [ 94.342509] Pid: 0, comm: swapper Not tainted 2.6.31-mm1 #2 [ 94.342509] Call Trace: [ 94.342509] [<c0248fbe>] register_lock_class+0x58/0x241 [ 94.342509] [<c024b5df>] ? __lock_acquire+0xb57/0xb73 [ 94.342509] [<c024ab34>] __lock_acquire+0xac/0xb73 [ 94.342509] [<c024b7fa>] ? lock_release_non_nested+0x17b/0x1de [ 94.342509] [<c024b662>] lock_acquire+0x67/0x84 [ 94.342509] [<c04cd1eb>] ? skb_dequeue+0x15/0x41 [ 94.342509] [<c054a857>] _spin_lock_irqsave+0x2f/0x3f [ 94.342509] [<c04cd1eb>] ? skb_dequeue+0x15/0x41 [ 94.342509] [<c04cd1eb>] skb_dequeue+0x15/0x41 [ 94.342509] [<c054a648>] ? _read_unlock+0x1d/0x20 [ 94.342509] [<c04cd641>] skb_queue_purge+0x14/0x1b [ 94.342509] [<fab94fdc>] l2cap_recv_frame+0xea1/0x115a [l2cap] [ 94.342509] [<c024b5df>] ? __lock_acquire+0xb57/0xb73 [ 94.342509] [<c0249c04>] ? mark_lock+0x1e/0x1c7 [ 94.342509] [<f8364963>] ? hci_rx_task+0xd2/0x1bc [bluetooth] [ 94.342509] [<fab95346>] l2cap_recv_acldata+0xb1/0x1c6 [l2cap] [ 94.342509] [<f8364997>] hci_rx_task+0x106/0x1bc [bluetooth] [ 94.342509] [<fab95295>] ? l2cap_recv_acldata+0x0/0x1c6 [l2cap] [ 94.342509] [<c02302c4>] tasklet_action+0x69/0xc1 [ 94.342509] [<c022fbef>] __do_softirq+0x94/0x11e [ 94.342509] [<c022fcaf>] do_softirq+0x36/0x5a [ 94.342509] [<c022fe14>] irq_exit+0x35/0x68 [ 94.342509] [<c0204ced>] do_IRQ+0x72/0x89 [ 94.342509] [<c02038ee>] common_interrupt+0x2e/0x34 [ 94.342509] [<c024007b>] ? pm_qos_add_requirement+0x63/0x9d [ 94.342509] [<c038e8a5>] ? acpi_idle_enter_bm+0x209/0x238 [ 94.342509] [<c049d238>] cpuidle_idle_call+0x5c/0x94 [ 94.342509] [<c02023f8>] cpu_idle+0x4e/0x6f [ 94.342509] [<c0534153>] rest_init+0x53/0x55 [ 94.342509] [<c0781894>] start_kernel+0x2f0/0x2f5 [ 94.342509] [<c0781091>] i386_start_kernel+0x91/0x96 Reported-by: Oliver Hartkopp <oliver@hartkopp.net> Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Tested-by: Oliver Hartkopp <oliver@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* bluetooth: scheduling while atomic bug fixDave Young2009-10-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to driver core changes dev_set_drvdata will call kzalloc which should be in might_sleep context, but hci_conn_add will be called in atomic context Like dev_set_name move dev_set_drvdata to work queue function. oops as following: Oct 2 17:41:59 darkstar kernel: [ 438.001341] BUG: sleeping function called from invalid context at mm/slqb.c:1546 Oct 2 17:41:59 darkstar kernel: [ 438.001345] in_atomic(): 1, irqs_disabled(): 0, pid: 2133, name: sdptool Oct 2 17:41:59 darkstar kernel: [ 438.001348] 2 locks held by sdptool/2133: Oct 2 17:41:59 darkstar kernel: [ 438.001350] #0: (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.+.}, at: [<faa1d2f5>] lock_sock+0xa/0xc [l2cap] Oct 2 17:41:59 darkstar kernel: [ 438.001360] #1: (&hdev->lock){+.-.+.}, at: [<faa20e16>] l2cap_sock_connect+0x103/0x26b [l2cap] Oct 2 17:41:59 darkstar kernel: [ 438.001371] Pid: 2133, comm: sdptool Not tainted 2.6.31-mm1 #2 Oct 2 17:41:59 darkstar kernel: [ 438.001373] Call Trace: Oct 2 17:41:59 darkstar kernel: [ 438.001381] [<c022433f>] __might_sleep+0xde/0xe5 Oct 2 17:41:59 darkstar kernel: [ 438.001386] [<c0298843>] __kmalloc+0x4a/0x15a Oct 2 17:41:59 darkstar kernel: [ 438.001392] [<c03f0065>] ? kzalloc+0xb/0xd Oct 2 17:41:59 darkstar kernel: [ 438.001396] [<c03f0065>] kzalloc+0xb/0xd Oct 2 17:41:59 darkstar kernel: [ 438.001400] [<c03f04ff>] device_private_init+0x15/0x3d Oct 2 17:41:59 darkstar kernel: [ 438.001405] [<c03f24c5>] dev_set_drvdata+0x18/0x26 Oct 2 17:41:59 darkstar kernel: [ 438.001414] [<fa51fff7>] hci_conn_init_sysfs+0x40/0xd9 [bluetooth] Oct 2 17:41:59 darkstar kernel: [ 438.001422] [<fa51cdc0>] ? hci_conn_add+0x128/0x186 [bluetooth] Oct 2 17:41:59 darkstar kernel: [ 438.001429] [<fa51ce0f>] hci_conn_add+0x177/0x186 [bluetooth] Oct 2 17:41:59 darkstar kernel: [ 438.001437] [<fa51cf8a>] hci_connect+0x3c/0xfb [bluetooth] Oct 2 17:41:59 darkstar kernel: [ 438.001442] [<faa20e87>] l2cap_sock_connect+0x174/0x26b [l2cap] Oct 2 17:41:59 darkstar kernel: [ 438.001448] [<c04c8df5>] sys_connect+0x60/0x7a Oct 2 17:41:59 darkstar kernel: [ 438.001453] [<c024b703>] ? lock_release_non_nested+0x84/0x1de Oct 2 17:41:59 darkstar kernel: [ 438.001458] [<c028804b>] ? might_fault+0x47/0x81 Oct 2 17:41:59 darkstar kernel: [ 438.001462] [<c028804b>] ? might_fault+0x47/0x81 Oct 2 17:41:59 darkstar kernel: [ 438.001468] [<c033361f>] ? __copy_from_user_ll+0x11/0xce Oct 2 17:41:59 darkstar kernel: [ 438.001472] [<c04c9419>] sys_socketcall+0x82/0x17b Oct 2 17:41:59 darkstar kernel: [ 438.001477] [<c020329d>] syscall_call+0x7/0xb Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-26 20:13:46 -0500