aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
* ALSA: hda - Fix Oops at codec reset/reconfigTakashi Iwai2012-09-10
| | | | | | | | | | | | | | | | snd_hda_codec_reset() calls restore_pincfgs() where the codec is powered up again, which eventually tries to resume and initialize via the callbacks of the codec. However, it's the place just after codec free callback, thus no codec callbacks should be called after that. On a codec like CS4206, it results in Oops due to the access in init callback. This patch fixes the issue by clearing the codec callbacks properly after freeing codec. Reported-by: Daniel J Blueman <daniel@quora.org> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: Fix bogus error messages for delay accountingTakashi Iwai2012-09-06
| | | | | | | | | | | | | | | | | | | | The recent fix for the missing fine delayed time adjustment gives strange error messages at each start of the playback stream, such as delay: estimated 0, actual 352 delay: estimated 353, actual 705 These come from the sanity check in retire_playback_urb(). Before the stream is activated via start_endpoints(), a few silent packets have been already sent. And at this point the delay account is still in the state as if the new packets are just queued, so the driver gets confused and spews the bogus error messages. For fixing the issue, we just need to check whether the received packet is valid, whether it's zero sized or not. Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: <stable@vger.kernel.org> [v3.5+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Fix missing Master volume for STAC9200/925xTakashi Iwai2012-09-06
| | | | | | | | | | | | With the commit [2faa3bf: ALSA: hda - Rewrite the mute-LED hook with vmaster hook in patch_sigmatel.c], the former Master volume control was converted to PCM. This was supposed to be covered by the vmaster control. But due to the lack of "PCM" slave definition, this didn't happen properly. The patch fixes the missing entry. Reported-by: Andrew Shadura <bugzilla@tut.by> Cc: <stable@vger.kernel.org> [v3.4+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: snd-usb: fix cross-interface streaming devicesDaniel Mack2012-08-31
| | | | | | | | | | | | | | | | Commit 68e67f40b ("ALSA: snd-usb: move calls to usb_set_interface") saved us some unnecessary calls to snd_usb_set_interface() but ignored the fact that there is at least one device out there which operates on two endpoint in different interfaces simultaniously. Take care for this by catching the case where data and sync endpoints are located on different interfaces and calling snd_usb_set_interface() between the start of the two endpoints. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-by: Robert M. Albrecht <linux@romal.de> Cc: stable@kernel.org [v3.5+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: snd-usb: fix calls to next_packet_sizeDaniel Mack2012-08-31
| | | | | | | | | | | | | | | | | | | | | | | | In order to support devices with implicit feedback streaming models, packet sizes are now stored with each individual urb, and the PCM handling code which fills the buffers purely relies on the size fields now. However, calling snd_usb_audio_next_packet_size() for all possible packets in an URB at once, prior to letting the PCM code do its job does in fact not lead to the same behaviour than what the old code did: The PCM code will break its loop once a period boundary is reached, consequently using up less packets that it really could. As snd_usb_audio_next_packet_size() implements a feedback mechanism to the endpoints phase accumulator, the number of calls to that function matters, and when called too often, the data rate runs out of bounds. Fix this by making the next_packet function public, and call it from the PCM code as before if the packet data sizes are not defined. Signed-off-by: Daniel Mack <zonque@gmail.com> Cc: stable@kernel.org [v3.5+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: snd-usb: restore delay informationDaniel Mack2012-08-31
| | | | | | | | | | | | | | Parts of commit 294c4fb8 ("ALSA: usb: refine delay information with USB frame counter") were unfortunately lost during the refactoring of the snd-usb driver in 3.5. This patch adds them back, restoring the correct delay information behaviour. Signed-off-by: Daniel Mack <zonque@gmail.com> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Cc: stable@kernel.org [3.5+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: snd-usb: use list_for_each_safe for endpoint resourcesPavel Roskin2012-08-31
| | | | | | | | snd_usb_endpoint_free() frees the structure that contains its argument. Signed-off-by: Pavel Roskin <proski@gnu.org> Cc: stable@vger.kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: snd-usb: Fix URB cancellation at stream startDaniel Mack2012-08-30
| | | | | | | | | | | | | | | | | Commit e9ba389c5 ("ALSA: usb-audio: Fix scheduling-while-atomic bug in PCM capture stream") fixed a scheduling-while-atomic bug that happened when snd_usb_endpoint_start was called from the trigger callback, which is an atmic context. However, the patch breaks the idea of the endpoints reference counting, which is the reason why the driver has been refactored lately. Revert that commit and let snd_usb_endpoint_start() take care of the URB cancellation again. As this function is called from both atomic and non-atomic context, add a flag to denote whether the function may sleep. Signed-off-by: Daniel Mack <zonque@gmail.com> Cc: stable@kernel.org [3.5+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Don't trust codec EPSS bit for IDT 92HD83xx & coTakashi Iwai2012-08-28
| | | | | | | | | | | These codecs seem reporting EPSS but require longer delay for the proper D3 transition. For example, D3_STOP_CLOCK_OK bit won't be set correctly even after D3. In this patch, codec->epss flag is overridden for avoid the misbehavior. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Avoid unnecessary parameter read for EPSSTakashi Iwai2012-08-28
| | | | | | | | | EPSS parameter should be static, so we can read it once and remember. This also allows more easily to override the wrong EPSS capability reported from a codec by changing the flag in the codec initialization step. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Do not set GPIOs for speakers on IDT if there are no speakersDavid Henningsson2012-08-22
| | | | | | | | | | | | This fixes an issue with a machine where there were no speakers, but GPIO0 had to be data=1 for the headphone to be functioning. I'm not sure if we need a more advanced patch to solve all possible cases, but if so, this patch would still provide a minor optimisation. BugLink: https://bugs.launchpad.net/bugs/1040077 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: snd-als100: fix suspend/resumeOndrej Zary2012-08-21
| | | | | | | | | | | snd_card_als100_probe() does not set pcm field in struct snd_sb. As a result, PCM is not suspended and applications don't know that they need to resume the playback. Tested with Labway A381-F20 card (ALS120). Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Fix leftover codec->power_transitionTakashi Iwai2012-08-20
| | | | | | | | | When the codec turn-on operation is canceled by the immediate power-on, the driver left the power_transition flag as is. This caused the persistent avoidance of power-save behavior. Cc: <stable@vger.kernel.org> [v3.5+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge tag 'asoc-3.6' of ↵Takashi Iwai2012-08-20
|\ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Additional updates for 3.6 A batch more bugfixes, all driver-specific and fairly small and unremarkable in a global context. The biggest batch are for the newly added Arizona drivers.
| * ASoC: wm9712: Fix inverted capture volumeMark Brown2012-08-17
| | | | | | | | | | | | | | | | The capture volume increases with the register value so it shouldn't be flagged as inverted. Reported-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: wm9712: Fix microphone source selectionMark Brown2012-08-17
| | | | | | | | | | | | | | | | | | | | | | | | | | Currently the microphone input source is not selectable as while there is a DAPM widget it's not connected to anything so it won't be properly instantiated. Add something more correct for the input structure to get things going, even though it's not hooked into the rest of the routing map and so won't actually achieve anything except allowing the relevant register bits to be written. Reported-by: Christop Fritz <chf.fritz@googlemail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
| * ASoC: wm5102: Remove DRC2Mark Brown2012-08-17
| | | | | | | | | | | | It will be removed from future device revisions. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: jack: Always notify full jack statusMark Brown2012-08-13
| | | | | | | | | | | | | | Don't just notify for the bits we've updated, notify the full state of the jack otherwise users might get confused by misleading reports. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: wm5110: Add missing input PGA routesMark Brown2012-08-13
| | | | | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: wm5102: Add missing input PGA routesMark Brown2012-08-13
| | | | | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: Samsung: Fix build errorSachin Kamat2012-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes the following build error: In file included from arch/arm/mach-exynos/include/mach/dma.h:24:0, from arch/arm/plat-samsung/include/plat/dma-ops.h:17, from arch/arm/plat-samsung/include/plat/dma.h:128, from sound/soc/samsung/pcm.c:23: arch/arm/plat-samsung/include/plat/dma-pl330.h:106:8: error: redefinition of ‘struct s3c2410_dma_client’ arch/arm/plat-samsung/include/plat/dma.h:40:8: note: originally defined here make[3]: *** [sound/soc/samsung/pcm.o] Error 1 Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * MAINTAINERS: Add entries for Wolfson Arizona class devicesMark Brown2012-08-10
| | | | | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: core: Upgrade the severity of probe deferral errors to dev_err()Mark Brown2012-08-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the past when ASoC had a custom probe deferral mechanism people complained about the logspam it generated and didn't want to know about the fact that we were doing probe deferral so all the error messages for it were at dev_dbg(), making diagnostics hard. Now that we have probe deferral as an accepted thing and it's generating log messages anyway there's no need to worry about this so upgrade the severity of all the probe deferral sources to dev_err() so that they are displayed by default. Also add one for missing aux_devs since there wasn't one. Reported-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: wm8994: Add missing dapm routes for WM8958 rev AChris Rattray2012-08-09
| | | | | | | | | | Signed-off-by: Chris Rattray <crattray@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: wm8962: Don't duplicate bias level management in resumeMark Brown2012-08-09
| | | | | | | | | | | | | | The core will bring the bias level up for us since we use idle_bias_off, duplicating this may be harmful. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: bfin: fix memory leak in sport3 controller driverScott Jiang2012-08-09
| | | | | | | | | | Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: Davinci: McASP: Flush the FIFO before enablingVaibhav Bedia2012-08-09
| | | | | | | | | | | | | | | | | | FIFO should be flushed before it is enabled for the first time. This fixes the I/O errors reported by the ASoC core on a fresh boot Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com> Signed-off-by: Hebbar, Gururaja <gururaja.hebbar@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: imx-ssi: Remove mono supportFabio Estevam2012-08-08
| | | | | | | | | | | | | | | | | | | | | | | | | | Playing a mono track results in incorrect playback rate, ie, the audio is played at a faster rate. Remove mono support in the driver by setting 'channes_min' to dual-channel and this allows mono tracks to be played correctly. Reported-by: Gaëtan Carlier <gcembed@gmail.com> Tested-by: Gaëtan Carlier <gcembed@gmail.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: mxs: Fix the name of the SoC familyFabio Estevam2012-08-08
| | | | | | | | | | | | | | SND_SOC_MXS_SGTL5000 is used on MXS boards, so fix the SoC family name. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: omap-mcbsp: Fix 6pin mux configurationPeter Ujfalusi2012-08-07
| | | | | | | | | | | | | | | | | | | | | | The check for the mux_signal callback was wrong which prevents us to configure the 6pin port's FSR/CLKR signal mux. Reported-by: CF Adad <cfadad@rocketmail.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org (3.4+)
| * Merge tag 'asoc-3.6' of ↵Mark Brown2012-08-03
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-3.6 ASoC: Additional updates for 3.6 A few updates for issues discovered during the merge window, the main one being the fix for the issues with defaulting to use of regmap without properly checking if there was I/O in place already.
| * | Linux 3.6-rc1Linus Torvalds2012-08-02
| | |
| * | Merge branch 'for-linus-3.6' of git://dev.laptop.org/users/dilinger/linux-olpcLinus Torvalds2012-08-02
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull OLPC platform updates from Andres Salomon: "These move the OLPC Embedded Controller driver out of arch/x86/platform and into drivers/platform/olpc. OLPC machines are now ARM-based (which means lots of x86 and ARM changes), but are typically pretty self-contained.. so it makes more sense to go through a separate OLPC tree after getting the appropriate review/ACKs." * 'for-linus-3.6' of git://dev.laptop.org/users/dilinger/linux-olpc: x86: OLPC: move s/r-related EC cmds to EC driver Platform: OLPC: move global variables into priv struct Platform: OLPC: move debugfs support from x86 EC driver x86: OLPC: switch over to using new EC driver on x86 Platform: OLPC: add a suspended flag to the EC driver Platform: OLPC: turn EC driver into a platform_driver Platform: OLPC: allow EC cmd to be overridden, and create a workqueue to call it drivers: OLPC: update various drivers to include olpc-ec.h Platform: OLPC: add a stub to drivers/platform/ for the OLPC EC driver
| | * | x86: OLPC: move s/r-related EC cmds to EC driverAndres Salomon2012-07-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The new EC driver calls platform-specific suspend and resume hooks; run XO-1-specific EC commands from there, rather than deep in s/r code. If we attempt to run EC commands after the new EC driver has suspended, it is refused by the ec->suspended checks. Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: Paul Fox <pgf@laptop.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
| | * | Platform: OLPC: move global variables into priv structAndres Salomon2012-07-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Populate olpc_ec_priv with variables that were previously global. This makes things a tad bit clearer, IMO. Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: Paul Fox <pgf@laptop.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
| | * | Platform: OLPC: move debugfs support from x86 EC driverAndres Salomon2012-07-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There's nothing about the debugfs interface for the EC driver that is architecture-specific, so move it into the arch-independent driver. The code is mostly unchanged with the exception of renamed variables, coding style changes, and API updates. Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: Paul Fox <pgf@laptop.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
| | * | x86: OLPC: switch over to using new EC driver on x86Andres Salomon2012-07-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This uses the new EC driver framework in drivers/platform/olpc. The XO-1 and XO-1.5-specific code is still in arch/x86, but the generic stuff (including a new workqueue; no more running EC commands with IRQs disabled!) can be shared with other architectures. Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: Paul Fox <pgf@laptop.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
| | * | Platform: OLPC: add a suspended flag to the EC driverAndres Salomon2012-07-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A problem we've noticed on XO-1.75 is when we suspend in the middle of an EC command. Don't allow that. In the process, create a private object for the generic EC driver to use; we have a framework for passing around a struct, use that rather than a proliferation of global variables. Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: Paul Fox <pgf@laptop.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
| | * | Platform: OLPC: turn EC driver into a platform_driverAndres Salomon2012-07-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 1.75-based OLPC EC driver already does this; let's do it for all EC drivers. This gives us nice suspend/resume hooks, amongst other things. We want to run the EC's suspend hooks later than other drivers (which may be setting wakeup masks or be running EC commands). We also want to run the EC's resume hooks earlier than other drivers (which may want to run EC commands). Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: Paul Fox <pgf@laptop.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
| | * | Platform: OLPC: allow EC cmd to be overridden, and create a workqueue to call itAndres Salomon2012-07-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This provides a new API allows different OLPC architectures to override the EC driver. x86 and ARM OLPC machines use completely different EC backends. The olpc_ec_cmd is synchronous, and waits for the workqueue to send the command to the EC. Multiple callers can run olpc_ec_cmd() at once, and they will by serialized and sleep while only one executes on the EC at a time. We don't provide an unregister function, as that doesn't make sense within the context of OLPC machines - there's only ever 1 EC, it's critical to functionality, and it certainly not hotpluggable. Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: Paul Fox <pgf@laptop.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
| | * | drivers: OLPC: update various drivers to include olpc-ec.hAndres Salomon2012-07-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Switch over to using olpc-ec.h in multiple steps, so as not to break builds. This covers every driver that calls olpc_ec_cmd(). Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: Paul Fox <pgf@laptop.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
| | * | Platform: OLPC: add a stub to drivers/platform/ for the OLPC EC driverAndres Salomon2012-07-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The OLPC EC driver has outgrown arch/x86/platform/. It's time to both share common code amongst different architectures, as well as move it out of arch/x86/. The XO-1.75 is ARM-based, and the EC driver shares a lot of code with the x86 code. Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: Paul Fox <pgf@laptop.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
| * | | Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2012-08-02
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull arm-soc Marvell Orion device-tree updates from Olof Johansson: "This contains a set of device-tree conversions for Marvell Orion platforms that were staged early but took a few tries to get the branch into a format where it was suitable for us to pick up. Given that most people working on these platforms are hobbyists with limited time, we were a bit more flexible with merging it even though it came in late." * tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits) ARM: Kirkwood: Replace mrvl with marvell ARM: Kirkwood: Describe GoFlex Net LEDs and SATA in DT. ARM: Kirkwood: Describe Dreamplug LEDs in DT. ARM: Kirkwood: Describe iConnects LEDs in DT. ARM: Kirkwood: Describe iConnects temperature sensor in DT. ARM: Kirkwood: Describe IB62x0 LEDs in DT. ARM: Kirkwood: Describe IB62x0 gpio-keys in DT. ARM: Kirkwood: Describe DNS32? gpio-keys in DT. ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi ARM: Kirkwood: Replace DNS-320/DNS-325 leds with dt bindings ARM: Kirkwood: Describe DNS325 temperature sensor in DT. ARM: Kirkwood: Use DT to configure SATA device. ARM: kirkwood: use devicetree for SPI on dreamplug ARM: kirkwood: Add LS-XHL and LS-CHLv2 support ARM: Kirkwood: Initial DTS support for Kirkwood GoFlex Net ARM: Kirkwood: Add basic device tree support for QNAP TS219. ATA: sata_mv: Add device tree support ARM: Orion: DTify the watchdog timer. ARM: Orion: Add arch support needed for I2C via DT. ARM: kirkwood: use devicetree for orion-spi ... Conflicts: drivers/watchdog/orion_wdt.c
| | * \ \ Merge branch 'marvell/dt' into late2/dtOlof Johansson2012-07-29
| | |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * marvell/dt: (41 commits) ARM: Kirkwood: Replace mrvl with marvell ARM: Kirkwood: Describe GoFlex Net LEDs and SATA in DT. ARM: Kirkwood: Describe Dreamplug LEDs in DT. ARM: Kirkwood: Describe iConnects LEDs in DT. ARM: Kirkwood: Describe iConnects temperature sensor in DT. ARM: Kirkwood: Describe IB62x0 LEDs in DT. ARM: Kirkwood: Describe IB62x0 gpio-keys in DT. ARM: Kirkwood: Describe DNS32? gpio-keys in DT. ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi ARM: Kirkwood: Replace DNS-320/DNS-325 leds with dt bindings ARM: Kirkwood: Describe DNS325 temperature sensor in DT. ARM: Kirkwood: Use DT to configure SATA device. ARM: kirkwood: use devicetree for SPI on dreamplug ARM: kirkwood: Add LS-XHL and LS-CHLv2 support ARM: Kirkwood: Initial DTS support for Kirkwood GoFlex Net ARM: Kirkwood: Add basic device tree support for QNAP TS219. ATA: sata_mv: Add device tree support ARM: Orion: DTify the watchdog timer. ARM: Orion: Add arch support needed for I2C via DT. ARM: kirkwood: use devicetree for orion-spi ...
| | | * | | ARM: Kirkwood: Replace mrvl with marvellAndrew Lunn2012-07-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It has been decided to use marvell, not mrvl, in the compatibility property. Search & replace. Signed-off-by: Andrew Lunn <andrew@lunn.ch>
| | | * | | ARM: Kirkwood: Describe GoFlex Net LEDs and SATA in DT.Andrew Lunn2012-07-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Josh Coombs <josh.coombs@gmail.com>
| | | * | | ARM: Kirkwood: Describe Dreamplug LEDs in DT.Andrew Lunn2012-07-27
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Andrew Lunn <andrew@lunn.ch>
| | | * | | ARM: Kirkwood: Describe iConnects LEDs in DT.Andrew Lunn2012-07-27
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Andrew Lunn <andrew@lunn.ch>
| | | * | | ARM: Kirkwood: Describe iConnects temperature sensor in DT.Andrew Lunn2012-07-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that we have I2C support in DT, describe the LM63 in the DT file for the iConnect. Signed-off-by: Andrew Lunn <andrew@lunn.ch>
| | | * | | ARM: Kirkwood: Describe IB62x0 LEDs in DT.Andrew Lunn2012-07-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Simon Baatz <gmbnomis@gmail.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-25 08:36:57 -0500