aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
* [PATCH] 1394: fix for recently added firewire patch that breaks things on ppcDanny Tholen2006-08-27
| | | | | | | | | | | | | | | | | Recently a patch was added for preliminary suspend/resume handling on !PPC_PMAC. However, this broke both suspend and firewire on powerpc because it saves the pci state after the device has already been disabled. This moves the save state to before the pmac specific code. Signed-off-by: Danny Tholen <obiwan@mailmij.org> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ben Collins <bcollins@ubuntu.com> Cc: Jody McIntyre <scjody@modernduck.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Fix docs for fs.suid_dumpableAlexey Dobriyan2006-08-27
| | | | | | | | | | | Sergey Vlasov noticed that there is not kernel.suid_dumpable, but fs.suid_dumpable. How KERN_SETUID_DUMPABLE ended up in fs_table[]? Hell knows... Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] tty: remove bogus call to cdev_del()Rolf Eike Beer2006-08-27
| | | | | | | | | When cdev_add() failed there is no reason to call cdev_del(). Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] rtc-s3c.c: fix time setting checksBen Dooks2006-08-27
| | | | | | | | | Fix the year check on setting the time with the S3C24XX RTC driver. Also move the debug to before the set to see what is going on if it does fail. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] swsusp: Fix swap_type_ofRafael J. Wysocki2006-08-27
| | | | | | | | | | | | There is a bug in mm/swapfile.c#swap_type_of() that makes swsusp only be able to use the first active swap partition as the resume device. Fix it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Hugh Dickins <hugh@veritas.com> Acked-by: Pavel Machek <pavel@suse.cz> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dm: Fix deadlock under high i/o load in raid1 setup.Daniel Kobras2006-08-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On an nForce4-equipped machine with two SATA disk in raid1 setup using dmraid, we experienced frequent deadlock of the system under high i/o load. 'cat /dev/zero > ~/zero' was the most reliable way to reproduce them: Randomly after a few GB, 'cp' would be left in 'D' state along with kjournald and kmirrord. The functions cp and kjournald were blocked in did vary, but kmirrord's wchan always pointed to 'mempool_alloc()'. We've seen this pattern on 2.6.15 and 2.6.17 kernels. http://lkml.org/lkml/2005/4/20/142 indicates that this problem has been around even before. So much for the facts, here's my interpretation: mempool_alloc() first tries to atomically allocate the requested memory, or falls back to hand out preallocated chunks from the mempool. If both fail, it puts the calling process (kmirrord in this case) on a private waitqueue until somebody refills the pool. Where the only 'somebody' is kmirrord itself, so we have a deadlock. I worked around this problem by falling back to a (blocking) kmalloc when before kmirrord would have ended up on the waitqueue. This defeats part of the benefits of using the mempool, but at least keeps the system running. And it could be done with a two-line change. Note that mempool_alloc() clears the GFP_NOIO flag internally, and only uses it to decide whether to wait or return an error if immediate allocation fails, so the attached patch doesn't change behaviour in the non-deadlocking case. Path is against current git (2.6.18-rc4), but should apply to earlier versions as well. I've tested on 2.6.15, where this patch makes the difference between random lockup and a stable system. Signed-off-by: Daniel Kobras <kobras@linux.de> Acked-by: Alasdair G Kergon <agk@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] drivers/rtc: fix rtc-s3c.cBen Dooks2006-08-27
| | | | | | | | | | | | In the cleanups of drivers/rtc/s3c-rtc.c, the base address for the registers got broken. This patch fixes that by ensuring the readb/writeb are all prefixed with the base returned from ioremap()ing the registers. Also fix check for valid year range, which was the wrong way around. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [DCCP]: Fix CCID3Ian McDonald2006-08-27
| | | | | | | | | | | | | | | | | | | | | | | | | This fixes CCID3 to give much closer performance to RFC4342. CCID3 is meant to alter sending rate based on RTT and loss. The performance was verified against: http://wand.net.nz/~perry/max_download.php For example I tested with netem and had the following parameters: Delayed Acks 1, MSS 256 bytes, RTT 105 ms, packet loss 5%. This gives a theoretical speed of 71.9 Kbits/s. I measured across three runs with this patch set and got 70.1 Kbits/s. Without this patchset the average was 232 Kbits/s which means Linux can't be used for CCID3 research properly. I also tested with netem turned off so box just acting as router with 1.2 msec RTT. The performance with this is the same with or without the patch at around 30 Mbit/s. Signed off by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
* [BRIDGE] netfilter: memory corruption fixStephen Hemminger2006-08-26
| | | | | | | | | The bridge-netfilter code will overwrite memory if there is not headroom in the skb to save the header. This first showed up when using Xen with sky2 driver that doesn't allocate the extra space. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2006-08-26
|\ | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [DCCP]: Introduce dccp_rx_hist_find_entry [DCCP]: Introduces follows48 function [DCCP]: Update contact details and copyright [DCCP]: Fix typo [IPV6]: Segmentation offload not set correctly on TCP children [CONNECTOR]: Add userspace example code into Documentation/connector/
| * [DCCP]: Introduce dccp_rx_hist_find_entryIan McDonald2006-08-26
| | | | | | | | | | | | | | This adds a new function dccp_rx_hist_find_entry. Signed off by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [DCCP]: Introduces follows48 functionIan McDonald2006-08-26
| | | | | | | | | | | | | | | | This adds a new function to see if two sequence numbers follow each other. Signed off by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [DCCP]: Update contact details and copyrightIan McDonald2006-08-26
| | | | | | | | | | | | | | Just updating copyright and contacts Signed off by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [DCCP]: Fix typoIan McDonald2006-08-26
| | | | | | | | | | | | | | This fixes a small typo in net/dccp/libs/packet_history.c Signed off by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [IPV6]: Segmentation offload not set correctly on TCP childrenStephen Hemminger2006-08-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | TCP over IPV6 would incorrectly inherit the GSO settings. This would cause kernel to send Tcp Segmentation Offload packets for IPV6 data to devices that can't handle it. It caused the sky2 driver to lock http://bugzilla.kernel.org/show_bug.cgi?id=7050 and the e1000 would generate bogus packets. I can't blame the hardware for gagging if the upper layers feed it garbage. This was a new bug in 2.6.18 introduced with GSO support. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [CONNECTOR]: Add userspace example code into Documentation/connector/Evgeniy Polyakov2006-08-26
| | | | | | | | | | | | | | | | | | | | I was asked several times to include userspace example code into Documentation, so if there is no policy against it, consider attached patch for 2.6.18. This program works with included Documentation/connector/cn_test.c connector module. Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
* | [DISKLABEL] SUN: Fix signed int usage for sector countJeff Mahoney2006-08-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current sun disklabel code uses a signed int for the sector count. When partitions larger than 1 TB are used, the cast to a sector_t causes the partition sizes to be invalid: # cat /proc/paritions | grep sdan 66 112 2146435072 sdan 66 115 9223372036853660736 sdan3 66 120 9223372036853660736 sdan8 This patch switches the sector count to an unsigned int to fix this. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | [SPARC]: Small smp cleanup.Krzysztof Helt2006-08-26
| | | | | | | | | | | | | | It moves the smp_procesors_ready variable to sun4d_smp.c only. Signed-off-by: Krzysztof Helt (krzysztof.h1@wp.pl) Signed-off-by: David S. Miller <davem@davemloft.net>
* | [SPARC]: enabling of the 2nd CPU in 2.6.18-rc4Krzysztof Helt2006-08-26
|/ | | | | | | | smp_setup_cpu_possible_map() needs to run after paging_init() so that the in-kernel device tree is setup. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
* [PATCH] unusual_devs update for UCR-61S2BAlan Stern2006-08-26
| | | | | | | | | | | | | | The existing unusual_devs entry for the UCR-61S2B appears to have too wide a revision range. It matches at least one device that doesn't respond to the initialization sequence. Perhaps the sequence needs to be updated, or perhaps something else can be done. For now, this patch (as764) restricts the range to include only the revision mentioned in the original comment. This resolves (for now!) Bugzilla entry #6950. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: pl2303: removed support for OTi's DKU-5 clone cableTomasz Kazmierczak2006-08-26
| | | | | | | | | This patch removes support for a clone of Nokia DKU-5 cable made by Ours Technology Inc, as it turned out that the cable does not use the pl2303 chip, but OTI-6858 chip which is not compatible with the pl2303. Signed-off-by: Tomasz Kazmierczak <tomek.fizyk@op.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: fix bug in cypress_cy7c63.c driverGreg Kroah-Hartman2006-08-26
| | | | | | | | This was pointed out by Adrian Bunk <bunk@stusta.de>, as found by the Coverity Checker. Cc: Adrian Bunk <bunk@stusta.de> Cc: Oliver Bock <o.bock@fh-wolfenbuettel.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI: kerneldoc correction in pci-driverHenrik Kretzschmar2006-08-26
| | | | | | | | Removes an unused kerneldoc entry from pci_match_device and put the others into correct order. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] CPCI hotplug: fix resource assignmentScott Murray2006-08-26
| | | | | | | | | | | | | | Here is a patch against the CPCI hotplug core to fix up PCI resource assignment such that things will actually work when a hot inserted device is enabled. I mentioned this patch to you way back in April at ELC, but am only now out from under things enough to clean it up and submit it. I've basically cribbed the corresponding code from shpchp_pci.c, so there are no big surprises. If it's still possible, I wouldn't mind this going into 2.6.18, but it wouldn't be the end of the world if it went into 2.6.19. Signed-off-by: Scott Murray <scottm@somanetworks.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI: fix ICH6 quirksDaniel Ritz2006-08-26
| | | | | | | | | | | | | | | - add the ICH6(R) LPC to the ICH6 ACPI quirks. currently only the ICH6-M is handled. [ PCI_DEVICE_ID_INTEL_ICH6_1 is the ICH6-M LPC, ICH6_0 is the ICH6(R) ] - remove the wrong quirk calling asus_hides_smbus_lpc() for ICH6. the register modified in asus_hides_smbus_lpc() has a different meaning in ICH6. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI: i386 mmconfig: don't forget bus number when setting ↵Daniel Ritz2006-08-26
| | | | | | | | | | | fallback_slots bits On i386 PCI mmconfig forgets the bus number when setting the fallback_slots bits which means fallback to conf1 only works for bus 0. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI: use PCBIOS as last fallbackDaniel Ritz2006-08-26
| | | | | | | | | | | | | | | | | | | there was a change in 2.6.17 which affected the order in which the PCI access methods are probed. this gives regressions on some machines with broken BIOS. the problem is that PCBIOS sometimes reports last bus wrong, leaving cardbus non-funcational. previously those system worked fine with direct access. The patch changes the PCI init code to have PCBIOS as last fallback, yet the PCBIOS code still has to run first to set pcibios_last_bus to the value reported by the BIOS. this is needed in case legacy PCI probing (arch/i386/pci/legacy.c) is used to detect peer busses. using direct access if available fixes the cardbus problems. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Cc: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: abituguru timeout fixesHans de Goede2006-08-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch contains 2 sets of fixes for the abituguru: 1) Much improved timeout handling, drasticly reducing the amount of timeout errors on some motherboards 2) Fix the exit paths in the bank1 sensor type detect code to always restore the original settings even on an error. Without this our special test settings could remain seriously confusing the system BIOS's setup menu. Both are very much related and are must haves, to avoid messing up the uguru CMOS settings. Detailed changes: - Much improved timeout / wait for status handling. Many thanks to Sunil Kumar, for all his testing, ideas and patches! The code now first busy waits, polling the uguru for the expected status as this usually succeeds pretty quickly (within 90 reads). To avoid unnecessary CPU burn in timeout conditions, the amount of busy waiting has been halved from previous versions (120 tries instead of 250). This is not a problem, because this version goes to sleep after 120 attemps for 1 jiffy and then tries again, it does this sleep and try again 5 times before finally giving up. This (almost?) completly removes the timeout errors some people have seen regulary. Apparently some older uguru versions sometimes are distracted for a (relatively) long time. This solves this. - These timeout errors not only occur in the sending address part of reading the uguru but also in the wait for read state, so errors in this state are now handled as retryable just like send address state errors and are only logged and reported to userspace if 3 executive tries fail. - Fix a very nasty bug in the bank1 sensor type detection code, where it would not restore the original settings in any of the error paths! - Since not successfully restoring the original settings can seriously confuse the system BIOS (hang when entering the relevant setup menu), we now try restoring them 3 times before giving up. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] i2c: tps65010 build fixesDavid Brownell2006-08-26
| | | | | | | | | | | | | | | | The tps65010.c driver in the main tree never got updated with build fixes since the last batch of I2C driver changes; and the genirq trigger flags were updated wierdly too. This also includes a minor tweak to reduce the frequency used to poll for unplug-the-AC-power on the TPS chips that don't provide relevant IRQs. It _would_ be nice to sense whether there's even a battery, but that'd normally be an HDQ/1-wire interface to a smart battery, and such APIs aren't standardized. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge gregkh@master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Greg Kroah-Hartman2006-08-26
|\
| * [SCSI] fix scsi_send_eh_cmnd regressionMike Christie2006-08-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The callers of scsi_send_eh_cmnd are setting the cmnd buffer, and then scsi_send_eh_cmnd is copying that updated buffer to the old_cmnd variable. Then after the command runs, we end up copying that old_cmnd var which has the new cmnd to the scsi command buffer. When this command gets recent, all types of fun things happen like getting TUR or START_STOP commands with data and scatterlists. This patch made against scsi-rc-fixes, has the callers of scsi_send_eh_cmnd pass in the command so scsi_send_eh_cmnd can do the right thing. This should go into 2.6.18 since this fixes a regression added when we removed some of the scsi_cmnd fields and replaced them with local variables. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] qla2xxx: Update version number to 8.01.07-k1.Andrew Vasquez2006-08-26
| | | | | | | | | | Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] qla2xxx: Properly re-enable EFT support after an ISP abort.Andrew Vasquez2006-08-26
| | | | | | | | | | | | | | | | Software must explicitely re-enable extended firmware tracing after any ISP abort condition. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] qla2xxx: Correct PLOGI retry logic.Andrew Vasquez2006-08-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Original code attempts to retry PLOGIs to fcports that are FCP_TARGETs only. If the driver never performed a successful PLOGI/PRLI, the port-type would never be assigned, and the relogin logic would silently drop the request (and thus the port would not be recognized and registered). The fix is relatively straightforward, drop the FCP_TARGET-only check. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] sg: fix incorrect page problemDouglas Gilbert2006-08-26
| | | | | | | | | | | | | | | | | | There's a problem where sg is executing a ->nopage operation on a compound page, it actually calls get_page() on the first page in the compound rather than the page which is being mapped. The fix is to select the correct page by indexing into the compound. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] lpfc 8.1.9 : Change version number to 8.1.9James Smart2006-08-19
| | | | | | | | | | | | | | Change version number to 8.1.9 Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] lpfc 8.1.9 : Stall eh handlers if resetting while rport blockedJames Smart2006-08-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Stall error handler if attempting resets/aborts while an rport is blocked. This avoids device offline scenarios due to errors in the error handler. Background: Although the transport is using the scsi_timed_out functionality to restart the timeout if the rport is blocked, if the timeout has already fired before the block occurs, the eh handler still runs and can take the device offline. Ultimately, this window cannot be resolved without significant work in the error handler thread. Christoph noted the first level of these issues when he noted the poor error response handling by the error thread. We found, under heavy load and error testing, that time window from when the scsi_times_out() adds the io to the queue to when the scsi_error_handler gets around to servicing it, can be in the several seconds range. In most cases, these test conditions are highly unusual, but possible. As a result, we're stalling the error handler in this race window so that we can avoid the device_offline transitions. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] lpfc 8.1.9 : Misc Bug FixesJames Smart2006-08-19
| | | | | | | | | | | | | | | | | | | | | | | | Misc Bug Fixes: - Cap MBX_DOWN_LINK command timeout to 60 seconds - Fix double free of ndlp object - Don't free mbox structures on error. The completion handlers expect to do so. - Clear host attention work items when going offline - Fixed discovery issues in multi-initiator environments. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] mptfc: correct out of order event processingMichael Reed2006-08-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch corrects a problem in mptfc which can result in targets being removed after executing an "lsiutil 99" reset of the fibre channel ports. The last rescan event was being processed before the setup reset work due to an inappropriate optimization in the event processing logic. Every rescan event is now queued for execution and the setup reset work now executes in the proper sequence. Signed-off-by: Michael Reed <mdr@sgi.com> Acked-by: Moore, Eric <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] mptfc: properly wait for firmware target discovery to completeMichael Reed2006-08-06
| | | | | | | | | | | | | | | | | | | | Based upon a conversation I had with LSI's fibre channel firmware guru, this patch adds another condition under which the driver waits for the firmware link initialization / target discovery to complete. Signed-off-by: Michael Reed <mdr@sgi.com> Acked-by: Moore, Eric <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] hptiop: backout ioctl messChristoph Hellwig2006-08-06
| | | | | | | | | | | | | | | | | | | | The hptiop just got merged with a horrible amount of really bad ioctl code that is against the standards for new scsi drivers. This patch backs it out (and fixes a small bug where scsi_add_host is called to early). We can re-add proper APIs once we agree on them. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * Merge ../linux-2.6James Bottomley2006-08-06
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/ia64/hp/sim/simscsi.c Stylistic differences in two separate fixes for buffer->request_buffer problem. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * | [SCSI] zfcp: bump version numberAndreas Herrmann2006-08-06
| | | | | | | | | | | | | | | | | | | | | New version number fo zfcp driver. Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * | [SCSI] zfcp: minor erp bug fixesAndreas Herrmann2006-08-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bug fixes for zfcp's erp: - trigger adapter reopen if do_QDIO fails - avoid erp deadlock if registration of scsi target or remote port hang - do not treat as error if exchange port data fails - decrease timeout for target reset and aborts - mark unit failed if slave_destroy is called Additionally some code cleanup was done: - made some functions void when retval is not of interest - shortened initialization of zfcp's host_template - corrected some comments Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * | [SCSI] zfcp: improve management of request IDsVolker Sameske2006-08-06
| | | | | | | | | | | | | | | | | | | | | | | | Improve request handling. Use hash table to manage request IDs. Signed-off-by: Volker Sameske <sameske@de.ibm.com> Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * | [SCSI] qla2xxx: Update version number to 8.01.05-k4.Andrew Vasquez2006-08-06
| | | | | | | | | | | | | | | Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * | [SCSI] qla2xxx: Fix to allow to reset devices using sg interface (sg_reset).Vladislav Bolkhovitin2006-08-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently it is impossible to reset provided by Qlogic QLA2xxx driver SCSI devices externally using corresponding sg devices, particularly via sg_reset utility, because qla2xxx driver in qla2xxx_eh_device_reset() function checks if the input scsi_cmnd has its private data (CMD_SP()) attached. Then the found pointer isn't used anywhere inside of qla2xxx_eh_device_reset(). If the RESET request comes from sg device, it doesn't have such private data. The attached patch removes check for non-NULL CMD_SP() from qla2xxx_eh_device_reset(), hence allows to reset QLA2xxx's devices using corresponding sg devices. AV: change applies to bus/host reset handlers as well. Signed-off-by: Vladislav Bolkhovitin <vst@vlnb.net> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * | [SCSI] qla2xxx: Log Trace/Diagonostic asynchronous events.Andrew Vasquez2006-08-06
| | | | | | | | | | | | | | | Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * | [SCSI] qla2xxx: Correct endianess problem while issuing a Marker IOCB on ↵Shyam Sundar2006-08-06
| | | | | | | | | | | | | | | | | | | | | ISP24xx. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * | [SCSI] lpfc 8.1.7 : Change version number to 8.1.8James Smart2006-08-06
| | | | | | | | | | | | | | | | | | | | | Change version number to 8.1.8 Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-12 22:51:36 -0500