aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
* ALSA: hda: take cmd_mutex in probe_codec()Wu Fengguang2009-08-03
| | | | | | | | | | Now that each codec will have its own module, it is possible for the user to load one codec while another one is running. So cmd_mutex would be a safe addition to probe_codec(). Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda: track CIRB/CORB command/response states for each codecWu Fengguang2009-08-03
| | | | | | | | | | | | | Recently we hit a bug in our dev board, whose HDMI codec#3 may emit redundant/spurious responses, which were then taken as responses to command for another onboard Realtek codec#2, and mess up both codecs. Extend the azx_rb.cmds and azx_rb.res to array and track each codec's commands/responses separately. This helps keep good codec safe from broken ones. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Fix quirk for Toshiba Satellite A135-S4527Takashi Iwai2009-08-03
| | | | | | | | | | Use model=lenovo instead of model=dallas for Toshiba Satellite A135-S4527 with ALC861-VD codec. Reference: Novell bnc#526325 https://bugzilla.novell.com/show_bug.cgi?id=526325 Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Increase PCM stream name buf in patch_realtek.cTakashi Iwai2009-07-31
| | | | | | | The name buf with size 16 is too short for some codec names, e.g. truncated like "ALC861-VD Analo". Now the size is doubled. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda: fix out-of-bound hdmi_eld.sad[] writeRoel Kluin2009-07-29
| | | | | | | | | e->sad[] is declared with size ELD_MAX_SAD=16, but the guard allows range 0-31. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Add quirk for Dell Studio 1555Takashi Iwai2009-07-27
| | | | | | | | | Added a quirk entry for Dell Studio 1555. Reference: Novell bnc#525244 https://bugzilla.novell.com/show_bug.cgi?id=525244 Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Fix mute control with some ALC262 modelsTakashi Iwai2009-07-24
| | | | | | | | | | | | The master mute switch is wrongly implemented as checking the pointer instead of its value, thus it can be never muted. This patch fixes the issue. Reference: Novell bnc#404873 https://bugzilla.novell.com/show_bug.cgi?id=404873 Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
* ALSA: hda - Restore GPIO1 properly at resume with AD1984ATakashi Iwai2009-07-22
| | | | | | | | | | | | | The commit 099db17e66294b02814dee01c81d9abbbeece93e introduced a regression at suspend/resume where the GPIO1 bit isn't properly restored, thus the speaker output gets muted initially after resume. The fix is simple, use the cached write for storing GPIO data. Reference: Novell bnc#522764 https://bugzilla.novell.com/show_bug.cgi?id=522764 Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Use snprintf() to be saferTakashi Iwai2009-07-22
| | | | | | | Use snprint() for creating the jack name string instead of sprintf() in patch_sigmatel.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Fix pin-setup for Sony VAIO with STAC9872 codecsTakashi Iwai2009-07-20
| | | | | | | | | | | | | | The recent rewrite of the codec parser for STAC9872 caused a regression for some Sony VAIO models that don't give proper pin default configs by BIOS. Even using model=vaio doesn't work because the pin definitions are set after the pin overrides. This patch fixes the pin definitions in patch_stac9872() to be put in the right place before the pin overrides. Also the patch adds the new quirk entry for VAIO F/S to have the correct pin default configs. Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
* ALSA: hda - Add quirk for Gateway T6834c laptopHao Song2009-07-20
| | | | | | | | | | | | Gateway T6834c laptops need EAPD always on while the default behavior for the STAC9205 reference board is to turn it off upon every HP plug. By using the special "eapd" model, which is first introduced for Gateway T1616 laptops for this same reason, this peculiarity can be properly handled. Signed-off-by: Hao Song <baritono.tux@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda_codec: Check for invalid zero connectionsJaroslav Kysela2009-07-19
| | | | | | | | | To prevent "Too many connections" message and the error path for some HDMI codecs (which makes onboard audio unusable), check for invalid zero connections for CONNECT_LIST verb. Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda_intel: more strict alc880_parse_auto_config dig_nid checkingJaroslav Kysela2009-07-10
| | | | | | | | | | | | | | | | | On some IbexPeak systems with ALC889A errors like "azx_get_response timeout, switching to polling mode: last cmd=0xaf9f000b" are produced, because non-existent codec #10 is wrongly accessed. The problem is that snd_hda_get_connections() returns out-of-range result for NID 0x1c (something like 0xf8f9 or 0xffff). This patch adds a check to alc880_parse_auto_config() to avoid using of this out-of-range NIDs. A better fix maybe to improve snd_hda_get_connections() routine to check for valid NID ranges if NIDs are expected as result. Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - targa and targa-2ch fixDavid Heidelberger2009-07-09
| | | | | | | | | Simplify ALC882_TARGA and return gpio3 to ALC883_TARGA_DIG and ALC883_TARGA_2ch_DIG, which I accidentally removed in commit id 64a8be74357477558183b43156c5536b642de134 Signed-off-by: David Heidelberger <d.okias@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - fix beep tone calculation for IDT/STAC codecsPaul Vojta2009-07-09
| | | | | | | | | | | | In the beep tone calculation for IDT/STAC codecs, lower numbers correspond to higher frequencies and vice versa. The current code has this backwards, resulting in beep frequencies which are way too high (and sound bad on tinny laptop speakers, resulting in complaints). [Also added hz <= 0 check by tiwai] Signed-off-by: Paul Vojta <vojta@math.berkeley.edu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Missing volume controls for Intel HDA (ALC269/EeePC)Darren Salt2009-07-08
| | | | | | | | | | | | There is a regression, introduced in aa202455eec51699e44f658530728162cefa1307 (in alsa-kernel) which I noticed when trying to use the headphone socket on my EeeCPC 901: the output was *very* quiet, practically silent. This patch corrects the control types to that which was obviously intended in the referenced commit. Signed-off-by: Darren Salt <linux@youmustbejoking.demon.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Disable AMD SB600 64bit address support onlyAndiry Brienza2009-07-08
| | | | | | | | | | | | HDA driver disabled HD audio 64bit address support for all AMD SB600/SB700/SB800 platforms with commit 09240cf429505891d6123ce14a29f58f2a60121e due to one SB600 issue reported by community, but we do not see the similar issue on SB700/SB800 platforms. This patch is to refine the workaround for SB600 only. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Check widget types while parsing capture source in patch_via.cTakashi Iwai2009-07-08
| | | | | | | | | Check the widget type and don't take invalid widgets while parsing the capture source in patch_via.c. Also, fixed some compile warnings introduced in the previous commit. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Fix capture source selection in patch_via.cTakashi Iwai2009-07-07
| | | | | | | | | | | The fixed widget NIDs in patch_via.c seem wrong for some codecs, and it resulted in the invalid capture source selection. This patch adds the code to parse the topology instead of using fixed numbers in order to get the right MUX widget id corresponding to the ADCs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Add missing EAPD initialization for VIA codecsTakashi Iwai2009-07-07
| | | | | | | | If the output pin is used and EAPD capability is present, turn on the EAPD bit. This fixes the silent output problem on ASUS laptops with VT1708S codec. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Clean up VT170x dig-in initialization codeTakashi Iwai2009-07-07
| | | | | | | Minor clean up for initializing the digital-in pin. No functional changes. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Fix error path in the sanity check in azx_pcm_open()Takashi Iwai2009-07-05
| | | | | | | Release resources cleanly after errors in the sanity check in azx_pcm_open(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - move 8086:fb30 quirk (stac9205) to the proper sectionHerton Ronaldo Krzesinski2009-07-04
| | | | | Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Add sanity check in PCM open callbackTakashi Iwai2009-07-03
| | | | | | | | Add some sanity checks of struct snd_pcm_hardware fields in the PCM open callback of hda driver. This makes a bit easier to debug any PCM setup errors in the codec side. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Call snd_pcm_lib_hw_rates() again after codec open callbackTakashi Iwai2009-07-03
| | | | | | | | The PCM rates bit field may have been changed by the codec open callback. In that case, we need to reset rate_min and rate_max. So, simply call snd_pcm_lib_hw_rates() again after the codec open callback. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Avoid invalid formats and rates with shared SPDIFTakashi Iwai2009-07-03
| | | | | | | | | Check whether formats and rates don't result in zero due to the restriction of SPDIF sharing. If any of them can be zero, disable the SPDIF sharing mode instead. Otherwise it will lead to a PCM configuration error. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Improve ASUS eeePC 1000 mixerTakashi Iwai2009-07-03
| | | | | | | | | | | | | The mixer elements created for ASUS eeePC 1000 with ALC269 aren't standard but strange words like "LineOut". Rename the element names to follow the standard one like "Headphone" and "Speaker". Also, split the volumes to each so that the virtual master can control them. The alc269_fujitsu_mixer is removed because it's now identical with the new eeepc mixer. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Add GPIO1 control at muting with HP laptopsTakashi Iwai2009-07-03
| | | | | | | | | | | | | HP laptops with AD1984A codecs (at least mobile models) need to set GPIO1 appropriately to indicate the mute state. The BIOS checks this bit to judge whether the mute on or off is sent via F8 key. Without changing this bit, the BIOS can be confused and may toggle the mute wrongly. Reference: Novell bnc#515266 https://bugzilla.novell.com/show_bug.cgi?id=515266 Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Add quirk for HP 6930pTakashi Iwai2009-07-01
| | | | | | Added a quirk model=laptop for HP 6930p (103c:30dc) with AD1984A codec. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Add missing static to patch_ca0110()Takashi Iwai2009-07-01
| | | | Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Add missing initializations for ALC268 and ALC269Takashi Iwai2009-06-29
| | | | | | | | | | | | | | During the changes to clean up / fix the realtek codec initialization routines in commit 4a79ba34cada6a5a4ee86ed53aa8a73ba1e6fc51, I forgot to add the check for ALC268 and ALC269. This resulted in the missing EAPD and COEF setup for these codecs. This patch adds the missing checks for these codecs. Reference: bko#13633 http://bugzilla.kernel.org/show_bug.cgi?id=13633 Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Line In for Acer Inspire 6530G modelTony Vroon2009-06-29
| | | | | | | | | | | The Line In connector is set up as PIN_IN by default, using VREF_HIZ. It is connected to both ADCs, so add it to both input selectors. Also add the ability to use the input mix (on a SoundBlaster one would call this "What You Hear"). Signed-off-by: Tony Vroon <tony@linx.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Use model=acer-aspire-6530g for Acer Aspire 6930GTakashi Iwai2009-06-25
| | | | | | | For Acer Aspire 6930G (1025:015e), acre-aspire-6530g model matches obviously better. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Fix acer-aspire-6530g model quirkEmilio López2009-06-25
| | | | | | | | | Fix the following bugs of acer-aspire-6530g model with ALC888: - HP jack to mute all speaker outputs including LFE - Make digital built-in mic working Signed-off-by: Emilio López <buhitoescolar@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Add pin-sense trigger when needed for Realtek codecsTakashi Iwai2009-06-25
| | | | | | | | | | | Realtek codecs require the pin-sense trigger call before actually reading the pin-sense. Without this, the pin-detection might not be done accurately. This patch adds the pin-capability check and issues the trigger call if required. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Linux 2.6.31-rc1v2.6.31-rc1Linus Torvalds2009-06-24
|
* Revert "PCI: use ACPI _CRS data by default"Linus Torvalds2009-06-24
| | | | | | | | | | | | | | This reverts commit 9e9f46c44e487af0a82eb61b624553e2f7118f5b. Quoting from the commit message: "At this point, it seems to solve more problems than it causes, so let's try using it by default. It's an easy revert if it ends up causing trouble." And guess what? The _CRS code causes trouble. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge git://git.infradead.org/battery-2.6Linus Torvalds2009-06-24
|\ | | | | | | | | | | | | | | | | * git://git.infradead.org/battery-2.6: da9030_battery: Fix race between event handler and monitor Add MAX17040 Fuel Gauge driver w1: ds2760_battery: add support for sleep mode feature w1: ds2760: add support for EEPROM read and write ds2760_battery: cleanups in ds2760_battery_probe()
| * da9030_battery: Fix race between event handler and monitorMike Rapoport2009-06-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are cases when charging monitor and the event handler try to change the charger state simultaneously. For instance, a charger is connected to the system, there's the detection event and the event handler tries to enable charging. It is possible that the periodic charging monitor runs at the same time and it still thinks there's no external charger. So it tries to disable the charging. As the result, even if the conditions necessary to charge the battery hold, there will be no actual charging. The patch changes the event handler so that instead of enabling/ disabling the charger immediately it would rather make the monitor run. The monitor code then decides what should be the charger state. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
| * Add MAX17040 Fuel Gauge driverMinkyu Kang2009-06-08
| | | | | | | | | | | | | | | | The MAX17040 is a I2C interfaced Fuel Gauge systems for lithium-ion batteries This patch adds support the MAX17040 Fuel Gauge Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
| * w1: ds2760_battery: add support for sleep mode featureDaniel Mack2009-06-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for ds2760's sleep mode feature. With this feature enabled, the chip enters a deep sleep mode and disconnects from the battery when the w1 line is held down for more than 2 seconds. This new behaviour can be switched on and off using a new module parameter. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Szabolcs Gyurko <szabolcs.gyurko@tlt.hu> Acked-by: Matt Reimer <mreimer@vpop.net> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
| * w1: ds2760: add support for EEPROM read and writeDaniel Mack2009-06-08
| | | | | | | | | | | | | | | | | | | | | | In order to modify the DS2762's status registers and to add support for sleep mode, there is need for functions to write the internal EEPROM. Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Matt Reimer <mreimer@vpop.net> Acked-by: Szabolcs Gyurko <szabolcs.gyurko@tlt.hu> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
| * ds2760_battery: cleanups in ds2760_battery_probe()Daniel Mack2009-06-08
| | | | | | | | | | | | | | | | | | | | Removed struct ds2760_platform_data which wasn't defined anywhere. Indentation cleanups. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Szabolcs Gyurko <szabolcs.gyurko@tlt.hu> Acked-by: Matt Reimer <mreimer@vpop.net> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
| |
| \
*-. \ Merge branches 'for-linus' of ↵Linus Torvalds2009-06-24
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/viro/{vfs-2.6,audit-current} * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: another race fix in jfs_check_acl() Get "no acls for this inode" right, fix shmem breakage inline functions left without protection of ifdef (acl) * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current: audit: inode watches depend on CONFIG_AUDIT not CONFIG_AUDIT_SYSCALL
| | * | audit: inode watches depend on CONFIG_AUDIT not CONFIG_AUDIT_SYSCALLEric Paris2009-06-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Even though one cannot make use of the audit watch code without CONFIG_AUDIT_SYSCALL the spaghetti nature of the audit code means that the audit rule filtering requires that it at least be compiled. Thus build the audit_watch code when we build auditfilter like it was before cfcad62c74abfef83762dc05a556d21bdf3980a2 Clearly this is a point of potential future cleanup.. Reported-by: Frans Pop <elendil@planet.nl> Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * | | another race fix in jfs_check_acl()Al Viro2009-06-24
| | | | | | | | | | | | | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * | | Get "no acls for this inode" right, fix shmem breakageAl Viro2009-06-24
| | | | | | | | | | | | | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * | | inline functions left without protection of ifdef (acl)Markus Trippelsdorf2009-06-24
| |/ / | | | | | | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | | Merge branch 'futexes-for-linus' of ↵Linus Torvalds2009-06-24
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'futexes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: futex: Fix the write access fault problem for real
| * | | futex: Fix the write access fault problem for realThomas Gleixner2009-06-24
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 64d1304a64 (futex: setup writeable mapping for futex ops which modify user space data) did address only half of the problem of write access faults. The patch was made on two wrong assumptions: 1) access_ok(VERIFY_WRITE,...) would actually check write access. On x86 it does _NOT_. It's a pure address range check. 2) a RW mapped region can not go away under us. That's wrong as well. Nobody can prevent another thread to call mprotect(PROT_READ) on that region where the futex resides. If that call hits between the get_user_pages_fast() verification and the actual write access in the atomic region we are toast again. The solution is to not rely on access_ok and get_user() for any write access related fault on private and shared futexes. Instead we need to fault it in with verification of write access. There is no generic non destructive write mechanism which would fault the user page in trough a #PF, but as we already know that we will fault we can as well call get_user_pages() directly and avoid the #PF overhead. If get_user_pages() returns -EFAULT we know that we can not fix it anymore and need to bail out to user space. Remove a bunch of confusing comments on this issue as well. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@kernel.org
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-02 17:12:10 -0500