aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
* [media] adv7604: restart STDI once if format is not foundHans Verkuil2012-11-21
| | | | | | | | | | | | The STDI block may measure wrong values, especially for lcvs and lcf. If the driver can not find any valid timing, the STDI block is restarted to measure the video timings again. The function will return an error, but the restart of STDI will generate a new STDI interrupt and the format detection process will restart. Signed-off-by: Mats Randgaard <matrandg@cisco.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] adv7604: use presets where possibleHans Verkuil2012-11-21
| | | | | | | | | | | Use predefined video timings (prim_mode/vid_std) when available as recommended by Analog Devices (http://ez.analog.com/message/48267#48267). Also remove 720p30 support since the ADV7604 can't handle that. (http://ez.analog.com/message/61488#61488) Signed-off-by: Mats Randgaard <matrandg@cisco.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] adv7604: Replace prim_mode by modeHans Verkuil2012-11-21
| | | | | | | | | | | | | | | Changes the way the primary mode is handled: - Remove it from platform_data since it doesn't belong there. - Add a new mode enum for use with s_routing. - Collapse the two HDMI modes into one HDMI mode: when setting up the timings manually we do not need to select HDMI_COMP mode. That's only needed when selecting a preset. This patch prepares for the next step where we switch to using the presets where available. Signed-off-by: Mats Randgaard <mats.randgaard@cisco.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] adv7604: cleanup referencesHans Verkuil2012-11-21
| | | | | | Signed-off-by: Mats Randgaard <mats.randgaard@cisco.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] dvb_usb_v2: switch interruptible mutex to normalAntti Palosaari2012-11-09
| | | | | | | | | | | | | | | | | | | | | Fixes error: dvb_usb_v2: pid_filter() failed=-4 error code -4 is EINTR, Interrupted system call That error blocks I/O in some cases as -EINTR error was returned by the mutex which was protecting USB control messages. We want configure hardware to sleep mode on every case after tuning is stopped. That kind of behavior blocks it, leaving hardware some unwanted state in worst case. That error was seen every time when af9015 was plugged to USB1.1 which leads use of hardware PID filters. Stop tuning (tzap) with ctrl+c failed as driver tries to remove hardware PID filters. Tested with every hardware which uses routine in question. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] dvb_usb_v2: fix pid_filter callback error loggingAntti Palosaari2012-11-08
| | | | | | | | | | | | Code block braces were missing which leds broken error logging and compiler warning. drivers/media/usb/dvb-usb-v2/dvb_usb_core.c: In function 'dvb_usb_ctrl_feed': drivers/media/usb/dvb-usb-v2/dvb_usb_core.c:291:12: warning: 'ret' may be used uninitialized in this function [-Wuninitialized] Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: Milan Tuma <milan.olin@seznam.cz> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] exynos-gsc: change driver compatible stringShaik Ameer Basha2012-10-27
| | | | | | | | | | | | As G-Scaler is going to stay unchanged across all exynos5 series SoCs, changing the driver compatible string name to "samsung,exynos5-gsc" from "samsung,exynos5250-gsc". This change is as per the discussion in the devicetree forum. http://www.mail-archive.com/devicetree-discuss@lists.ozlabs.org/msg16448.html Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] omap3isp: Fix warning caused by bad subdev events operations prototypesLaurent Pinchart2012-10-25
| | | | | | | | | Remove the const keyword from the V4L2 subdev events operations to match the V4L2 API. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] omap3isp: video: Fix warning caused by bad vidioc_s_crop prototypeLaurent Pinchart2012-10-25
| | | | | | | | | | Commit 4f996594 ("v4l2: make vidioc_s_crop const") modified the vidioc_s_crop operation prototype but forgot to update the OMAP3 ISP driver. Add a const keyword to fix the function prototype. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] dvb-frontends: fix potential NULL pointer dereference in ↵Wei Yongjun2012-10-25
| | | | | | | | | | | stv0900_set_mclk() The dereference should be moved below the NULL test. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] s5p-fimc: Fix potential NULL pointer dereferenceSachin Kamat2012-10-25
| | | | | | | | | 'fimc' was being dereferenced before the NULL check. Moved it to after the check. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] s5p-fimc: Fix platform entities registrationSylwester Nawrocki2012-10-25
| | | | | | | | | Make sure the platform sub-devices are registered to the media device driver only when v4l2_device_register_subdev() succeeds. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] s5p-csis: Select S5P_SETUP_MIPIPHYSylwester Nawrocki2012-10-25
| | | | | | | | | | | | After commit ccbfd1d49dc0d6a "[media] s5p-csis: Replace phy_enable platform.." s5p-csis depends now on the commmon MIPI CSIS/MIPI DSIM DPHY control code. Add select S5P_SETUP_MIPIPHY to make this dependency explicit, until the code from arch/arm/plat-samsung is moved to drivers/ directory and converted to a regular phy driver module. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] s5p-fimc: Don't ignore return value of vb2_queue_init()Sylwester Nawrocki2012-10-25
| | | | | | | | | | | | | | | | Add missing checks for return value of vb2_queue_init(), after this function has been modified recently to not throw BUG_ON(). This eliminates related compiler warnings, drivers/media/platform/s5p-fimc/fimc-lite.c: In function fimc_lite_subdev_registered: drivers/media/platform/s5p-fimc/fimc-lite.c:1256:16: warning: ignoring return value of vb2_queue_init, declared with attribute warn_unused_result [-Wunused-result] drivers/media/platform/s5p-fimc/fimc-capture.c: In function fimc_register_capture_device: drivers/media/platform/s5p-fimc/fimc-capture.c:1739:16: warning: ignoring return value of vb2_queue_init, declared with attribute warn_unused_result [-Wunused-result] Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] Kconfig: Fix dependencies for driver autoselect optionsMauro Carvalho Chehab2012-10-17
| | | | | | | | | | | | | This option is a merge of both analog TV and DVB CUSTOMISE. At the merge, the dependencies were not done right: the menu currently appears only for analog TV. It should also be opened for digital TV. As there are other I2C devices there (flash devices, etc) that aren't related to either one, it is better to make it generic enough to open for all media devices with video. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* DocBook/media/Makefile: Fix build due to uapi breakageMauro Carvalho Chehab2012-10-17
| | | | | | | | The uapi changeset forgot to fix the header locations, needed for the DocBook specs. Fix it. Cc: David Howells <dhowells@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* UAPI: (Scripted) Disintegrate include/linux/dvbDavid Howells2012-10-17
| | | | | | | | | | Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* Merge tag 'v3.7-rc1' into staging/for_v3.8Mauro Carvalho Chehab2012-10-17
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Linux 3.7-rc1 * tag 'v3.7-rc1': (9579 commits) Linux 3.7-rc1 x86, boot: Explicitly include autoconf.h for hostprogs perf: Fix UAPI fallout ARM: config: make sure that platforms are ordered by option string ARM: config: sort select statements alphanumerically UAPI: (Scripted) Disintegrate include/linux/byteorder UAPI: (Scripted) Disintegrate include/linux UAPI: Unexport linux/blk_types.h UAPI: Unexport part of linux/ppp-comp.h perf: Handle new rbtree implementation procfs: don't need a PATH_MAX allocation to hold a string representation of an int vfs: embed struct filename inside of names_cache allocation if possible audit: make audit_inode take struct filename vfs: make path_openat take a struct filename pointer vfs: turn do_path_lookup into wrapper around struct filename variant audit: allow audit code to satisfy getname requests from its names_list vfs: define struct filename and have getname() return it btrfs: Fix compilation with user namespace support enabled userns: Fix posix_acl_file_xattr_userns gid conversion userns: Properly print bluetooth socket uids ...
| * Linux 3.7-rc1Linus Torvalds2012-10-14
| |
| * Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2012-10-14
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MIPS update from Ralf Baechle: "Cleanups and fixes for breakage that occured earlier during this merge phase. Also a few patches that didn't make the first pull request. Of those is the Alchemy work that merges code for many of the SOCs and evaluation boards thus among other code shrinkage, reduces the number of MIPS defconfigs by 5." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (22 commits) MIPS: SNI: Switch RM400 serial to SCCNXP driver MIPS: Remove unused empty_bad_pmd_table[] declaration. MIPS: MT: Remove kspd. MIPS: Malta: Fix section mismatch. MIPS: asm-offset.c: Delete unused irq_cpustat_t struct offsets. MIPS: Alchemy: Merge PB1100/1500 support into DB1000 code. MIPS: Alchemy: merge PB1550 support into DB1550 code MIPS: Alchemy: Single kernel for DB1200/1300/1550 MIPS: Optimize TLB refill for RI/XI configurations. MIPS: proc: Cleanup printing of ASEs. MIPS: Hardwire detection of DSP ASE Rev 2 for systems, as required. MIPS: Add detection of DSP ASE Revision 2. MIPS: Optimize pgd_init and pmd_init MIPS: perf: Add perf functionality for BMIPS5000 MIPS: perf: Split the Kconfig option CONFIG_MIPS_MT_SMP MIPS: perf: Remove unnecessary #ifdef MIPS: perf: Add cpu feature bit for PCI (performance counter interrupt) MIPS: perf: Change the "mips_perf_event" table unsupported indicator. MIPS: Align swapper_pg_dir to 64K for better TLB Refill code. vmlinux.lds.h: Allow architectures to add sections to the front of .bss ...
| | * Merge tag 'disintegrate-mips-20121009' of ↵Ralf Baechle2012-10-11
| | |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.infradead.org/users/dhowells/linux-headers into mips-for-linux-next UAPI Disintegration 2012-10-09 Patchwork: https://patchwork.linux-mips.org/patch/4414/
| | | * UAPI: (Scripted) Disintegrate arch/mips/include/asmDavid Howells2012-10-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com>
| | * | MIPS: SNI: Switch RM400 serial to SCCNXP driverThomas Bogendoerfer2012-10-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The new SCCNXP driver supports the SC2681 chips used in RM400 machines. We now use the new driver instead of the old SC26xx driver. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4417/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: Remove unused empty_bad_pmd_table[] declaration.Ralf Baechle2012-10-11
| | | | | | | | | | | | | | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: MT: Remove kspd.Ralf Baechle2012-10-11
| | | | | | | | | | | | | | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: Malta: Fix section mismatch.Ralf Baechle2012-10-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LD arch/mips/pci/built-in.o WARNING: arch/mips/pci/built-in.o(.devinit.text+0x2a0): Section mismatch in reference from the function malta_piix_func0_fixup() to the variable .init.data:pci_irq The function __devinit malta_piix_func0_fixup() references a variable __initdata pci_irq. If pci_irq is only used by malta_piix_func0_fixup then annotate pci_irq with a matching annotation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: asm-offset.c: Delete unused irq_cpustat_t struct offsets.Ralf Baechle2012-10-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Originally added in 05b541489c48e7fbeec19a92acf8683230750d0a [Merge with Linux 2.5.5.] over 10 years ago but never been used. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: Alchemy: Merge PB1100/1500 support into DB1000 code.Manuel Lauss2012-10-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PB1100/1500 are similar to their DB-cousins but with a few more devices on the bus. This patch adds PB1100/1500 support to the existing DB1100/1500 code. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: lnux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4338/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: Alchemy: merge PB1550 support into DB1550 codeManuel Lauss2012-10-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PB1550 is more or less a DB1550 without the PCI IDE controller, a more complicated (read: configurable) Flash setup and some other minor changes. Like the DB1550 it can be automatically detected by reading the CPLD ID register bits. This patch adds PB1550 detection and setup to the DB1550 code. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4337/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: Alchemy: Single kernel for DB1200/1300/1550Manuel Lauss2012-10-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Combine support for the DB1200/PB1200, DB1300 and DB1550 boards into a single kernel image. defconfig-generated image verified on DB1200, DB1300 and DB1550. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4335/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: Optimize TLB refill for RI/XI configurations.David Daney2012-10-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We don't have to do a separate shift to eliminate the software bits, just rotate them into the fill and they will be ignored. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4294/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: proc: Cleanup printing of ASEs.Ralf Baechle2012-10-11
| | | | | | | | | | | | | | | | | | | | | | | | The number of %s was just getting ridiculous. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: Hardwire detection of DSP ASE Rev 2 for systems, as required.Ralf Baechle2012-10-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most supported systems currently hardwire cpu_has_dsp to 0, so we also can disable support for cpu_has_dsp2 resulting in a slightly smaller kernel. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: Add detection of DSP ASE Revision 2.Steven J. Hill2012-10-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ralf@linux-mips.org: This patch really only detects the ASE and passes its existence on to userland via /proc/cpuinfo. The DSP ASE Rev 2. adds new resources but no resources that would need management by the kernel.] Signed-off-by: Steven J. Hill <sjhill@mips.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4165/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: Optimize pgd_init and pmd_initDavid Daney2012-10-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On a dual issue processor GCC generates code that saves a couple of clock cycles per loop if we rearrange things slightly. Checking for p != end saves a SLTU per loop, moving the increment to the middle can let it dual issue on multi-issue processors. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4249/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: perf: Add perf functionality for BMIPS5000Al Cooper2012-10-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add hardware performance counter support to kernel "perf" code for BMIPS5000. The BMIPS5000 performance counters are similar to MIPS MTI cores, so the changes were mostly made in perf_event_mipsxx.c which is typically for MTI cores. Signed-off-by: Al Cooper <alcooperx@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/4109/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: perf: Split the Kconfig option CONFIG_MIPS_MT_SMPAl Cooper2012-10-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Split the Kconfig option CONFIG_MIPS_MT_SMP into CONFIG_MIPS_MT_SMP and CONFIG_MIPS_PERF_SHARED_TC_COUNTERS so some of the code used for performance counters that are shared between threads can be used for MIPS cores that are not MT_SMP. Signed-off-by: Al Cooper <alcooperx@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/4108/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: perf: Remove unnecessary #ifdefAl Cooper2012-10-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The #ifdef for CONFIG_HW_PERF_EVENTS is not needed because the Makefile will only compile the module if this config option is set. This means that the code under #else would never be compiled. This may have been done to leave the original broken code around for reference, but the FIXME comment above the code already shows the broken code. Signed-off-by: Al Cooper <alcooperx@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/4107/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: perf: Add cpu feature bit for PCI (performance counter interrupt)Al Cooper2012-10-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PCI (Program Counter Interrupt) bit in the "cause" register is mandatory for MIPS32R2 cores, but has also been added to some R1 cores (BMIPS5000). This change adds a cpu feature bit to make it easier to check for and use this feature. Signed-off-by: Al Cooper <alcooperx@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/4106/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: perf: Change the "mips_perf_event" table unsupported indicator.Al Cooper2012-10-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change the indicator from 0xffffffff in the "event_id" member to zero in the "cntr_mask" member. This removes the need to initialize entries that are unsupported. This also solves a problem where the number of entries in the table was increased based on a globel enum used for all platforms, but the new unsupported entries were not added for mips. This was leaving new table entries of all zeros that we not marked UNSUPPORTED. Signed-off-by: Al Cooper <alcooperx@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/4110/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: Align swapper_pg_dir to 64K for better TLB Refill code.David Daney2012-10-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We can save an instruction in the TLB Refill path for kernel mappings by aligning swapper_pg_dir on a 64K boundary. The address of swapper_pg_dir can be generated with a single LUI instead of LUI/{D}ADDUI. The alignment of __init_end is bumped up to 64K so there are no holes between it and swapper_pg_dir, which is placed at the very beginning of .bss. The alignment of invalid_pmd_table and invalid_pte_table can be relaxed to PAGE_SIZE. We do this by using __page_aligned_bss, which has the added benefit of eliminating alignment holes in .bss. Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: linux-arch@vger.kernel.org, Cc: linux-kernel@vger.kernel.org Acked-by: Arnd Bergmann <arnd@arndb.de> Patchwork: https://patchwork.linux-mips.org/patch/4220/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | vmlinux.lds.h: Allow architectures to add sections to the front of .bssDavid Daney2012-10-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Follow-on MIPS patch will put an object here that needs 64K alignment to minimize padding. For those architectures that don't define BSS_FIRST_SECTIONS, there is no change. Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: linux-arch@vger.kernel.org, Cc: linux-kernel@vger.kernel.org Acked-by: Arnd Bergmann <arnd@arndb.de> Patchwork: https://patchwork.linux-mips.org/patch/4221/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | Improve atomic.h robustnessJoshua Kinard2012-10-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I've maintained this patch, originally from Thiemo Seufer in 2004, for a really long time, but I think it's time for it to get a look at for possible inclusion. I have had no problems with it across various SGI systems over the years. To quote the post here: http://www.linux-mips.org/archives/linux-mips/2004-12/msg00000.html "the atomic functions use so far memory references for the inline assembler to access the semaphore. This can lead to additional instructions in the ll/sc loop, because newer compilers don't expand the memory reference any more but leave it to the assembler. The appended patch uses registers instead, and makes the ll/sc arguments more explicit. In some cases it will lead also to better register scheduling because the register isn't bound to an output any more." Signed-off-by: Joshua Kinard <kumba@gentoo.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4029/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | | Merge branch 'modules-next' of ↵Linus Torvalds2012-10-14
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module signing support from Rusty Russell: "module signing is the highlight, but it's an all-over David Howells frenzy..." Hmm "Magrathea: Glacier signing key". Somebody has been reading too much HHGTTG. * 'modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (37 commits) X.509: Fix indefinite length element skip error handling X.509: Convert some printk calls to pr_devel asymmetric keys: fix printk format warning MODSIGN: Fix 32-bit overflow in X.509 certificate validity date checking MODSIGN: Make mrproper should remove generated files. MODSIGN: Use utf8 strings in signer's name in autogenerated X.509 certs MODSIGN: Use the same digest for the autogen key sig as for the module sig MODSIGN: Sign modules during the build process MODSIGN: Provide a script for generating a key ID from an X.509 cert MODSIGN: Implement module signature checking MODSIGN: Provide module signing public keys to the kernel MODSIGN: Automatically generate module signing keys if missing MODSIGN: Provide Kconfig options MODSIGN: Provide gitignore and make clean rules for extra files MODSIGN: Add FIPS policy module: signature checking hook X.509: Add a crypto key parser for binary (DER) X.509 certificates MPILIB: Provide a function to read raw data into an MPI X.509: Add an ASN.1 decoder X.509: Add simple ASN.1 grammar compiler ...
| | * | | X.509: Fix indefinite length element skip error handlingDavid Howells2012-10-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | asn1_find_indefinite_length() returns an error indicator of -1, which the caller asn1_ber_decoder() places in a size_t (which is usually unsigned) and then checks to see whether it is less than 0 (which it can't be). This can lead to the following warning: lib/asn1_decoder.c:320 asn1_ber_decoder() warn: unsigned 'len' is never less than zero. Instead, asn1_find_indefinite_length() update the caller's idea of the data cursor and length separately from returning the error code. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| | * | | X.509: Convert some printk calls to pr_develDavid Howells2012-10-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some debugging printk() calls should've been converted to pr_devel() calls. Do that now. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| | * | | asymmetric keys: fix printk format warningRandy Dunlap2012-10-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix printk format warning in x509_cert_parser.c: crypto/asymmetric_keys/x509_cert_parser.c: In function 'x509_note_OID': crypto/asymmetric_keys/x509_cert_parser.c:113:3: warning: format '%zu' expects type 'size_t', but argument 2 has type 'long unsigned int' Builds cleanly on i386 and x86_64. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: David Howells <dhowells@redhat.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: linux-crypto@vger.kernel.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| | * | | MODSIGN: Fix 32-bit overflow in X.509 certificate validity date checkingDavid Howells2012-10-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current choice of lifetime for the autogenerated X.509 of 100 years, putting the validTo date in 2112, causes problems on 32-bit systems where a 32-bit time_t wraps in 2106. 64-bit x86_64 systems seem to be unaffected. This can result in something like: Loading module verification certificates X.509: Cert 6e03943da0f3b015ba6ed7f5e0cac4fe48680994 has expired MODSIGN: Problem loading in-kernel X.509 certificate (-127) Or: X.509: Cert 6e03943da0f3b015ba6ed7f5e0cac4fe48680994 is not yet valid MODSIGN: Problem loading in-kernel X.509 certificate (-129) Instead of turning the dates into time_t values and comparing, turn the system clock and the ASN.1 dates into tm structs and compare those piecemeal instead. Reported-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Josh Boyer <jwboyer@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| | * | | MODSIGN: Make mrproper should remove generated files.Rusty Russell2012-10-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It doesn't, because the clean targets don't include kernel/Makefile, and because two files were missing from the list. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| | * | | MODSIGN: Use utf8 strings in signer's name in autogenerated X.509 certsDavid Howells2012-10-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Place an indication that the certificate should use utf8 strings into the x509.genkey template generated by kernel/Makefile. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
generated by cgit v1.2.2 (git 2.25.0) at 2025-01-16 22:47:13 -0500