aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
* ALSA: hda - Add/fix ALC269 FSC and Quanta modelsKailang Yang2010-02-25
| | | | | | | Specify proper quirk models for FSC and Quanta machines with ALC269 codec. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Add ALC670 codec supportKailang Yang2010-02-25
| | | | | | | | | | - Fixed alc_subsystem_id( ) typo and add new function. - !(ass & 0x100000)) ==> Delete this check. It is unnecessary check. - Add porti - ALC670 support Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - remove unnecessary msleep on power state transitionsZhang, Rui2010-02-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This will save ~15ms boot time. The first 10ms sleep was introduced in commit d2595d86e5 for (buggy) Cxt codecs, so better to limit the sleep to the problem hardware. For the second 10ms sleep, the HDA spec says: Power State[1:0]: 00: Node Power state (D0) is fully on. 01: Node Power state (D1) allows for (does not require) the lowest possible power consuming state from which it can return to the "fully on" state (D0) within 10 ms, excepting analog pass through circuits (e.g., CD analog playback) which must remain fully on. 10: Node Power state (D2) allows for (does not require) the lowest possible power consuming state from which it can return to the "fully on" state (D0) within 10 ms. For modems, this is the "wake on ring" power state. 11: Node Power state (D3) allows for (does not require) lowest possible power consuming state under software control. Note that any low power state set by software must retain sufficient operational capability to properly respond to subsequent software Power State command. So 10ms is actually the max wait time. It should be safe to remove/reduce it and rely on the loop of 1ms-sleeps. CC: Marc Boucher <marc@linuxant.com> CC: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Add missing description in HD-Audio-Models.txtTakashi Iwai2010-02-23
| | | | Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: add support for Macbook Air 2,1 internal speakerReimundo Heluani2010-02-23
| | | | | | | | Add support for Macbook Air 2,1 (late 2008) internal speaker and headphones. Create a "mba21" model for snd-hda-intel. Signed-off-by: Reimundo Heluani <rheluani@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - enable snoop for Intel Cougar PointSeth Heasley2010-02-23
| | | | | | | | This patch enables snoop, eliminating static during playback. This patch supersedes the previous Cougar Point audio patch. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Remove identical definitions for macmini3 modelTakashi Iwai2010-02-23
| | | | | | The channel mode definitions for macmini3 model are identical with mb5. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda-intel: Add position_fix quirk for ASUS M2V-MX SE.Paul Menzel2010-02-22
| | | | | | | | | | | | | | | | | | | | | | | | With PulseAudio and an application accessing an input device like `gnome-volume-manager` both have high CPU load as reported in [1]. Loading `snd-hda-intel` with `position_fix=1` fixes this issue. Therefore add a quirk for ASUS M2V-MX SE. The only downside is, when now exiting for example MPlayer when it is playing an audio file a high pitched sound is outputted by the speaker. $ lspci -vvnn | grep -A10 Audio 20:01.0 Audio device [0403]: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller) [1106:3288] (rev 10) Subsystem: ASUSTeK Computer Inc. Device [1043:8290] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at fbffc000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel [1] http://sourceforge.net/mailarchive/forum.php?thread_name=1265550675.4642.24.camel%40mattotaupa&forum_name=alsa-user Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: Typo. s/distrubs/disturbs/Paul Menzel2010-02-22
| | | | | Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Clean up Intel Mac unsol codesTakashi Iwai2010-02-22
| | | | | | | Use the standard unsol_event callback with each setup callback for IntelMac models with Realtek ALC885 codecs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Add Macmini 3,1 supportLuke Yelavich2010-02-22
| | | | | | | | | | | | | | | BugLink: https://bugs.edge.launchpad.net/ubuntu/+source/linux/+bug/343989 Add a model quirk for the NVIDIA based Macmini hardware, aka Macmini 3,1. The pinout is almost identical to the mb5 quirk, except for no microphone and the line-in mixer controls being on a different index. Everything works in 2ch mode, but as I am not sure what needs to be changed for 6ch mode, or whether the Mac Mini's chip supports 6ch mode, I have simply duplicated the code from the mb5 quirk for the mac mini chmode management. The new model parameter for this quirk is "macmini3". Signed-off-by: Luke Yelavich <luke.yelavich@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda: Use 3stack quirk for Toshiba Satellite L40-10QDaniel T Chen2010-02-22
| | | | | | | | | | | | | | BugLink: https://bugs.launchpad.net/bugs/524948 The OR has verified that the existing model=laptop-eapd quirk does not function correctly but instead needs model=3stack. Make this change so that manual corrections to module-init-tools file(s) are not required. Reported-by: Lasse Havelund <lasse@havelund.org> CC: <stable@kernel.org> Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Add support for Lenovo IdeaPad U150Greg Alexander2010-02-13
| | | | | | | Add patch for the Conexant 5066 HDA codec to support the Lenovo IdeaPad U150 Signed-off-by: Greg Alexander <greigs@galexander.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge branch 'fix/hda' into topic/hdaTakashi Iwai2010-02-09
|\
| * ALSA: hda-intel: Avoid divide by zero crashJody Bruchon2010-02-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On my AMD780V chipset, hda_intel.c can crash the kernel with a divide by zero for as-yet unknown reasons. A simple check for zero prevents it, though the problem that causes it remains. Since the workaround is harmless and won't affect anyone except victims of this bug, it should be safe; moreover, because this crash can be triggered by a user-mode application, there are denial of service implications on the systems affected by the bug without the patch. Signed-off-by: Jody Bruchon <jody@nctritech.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Fix default polarity of mute-LED GPIO on 92HD83x/88x codecsTakashi Iwai2010-02-09
| | | | | | | | | | | | | | | | | | | | | | The previous commit caused a regression on HP laptops with 92HD83x/88x codecs. The default polarity of mute-LED GPIO is inverted on these devices. Reference: Novell bnc#578190 https://bugzilla.novell.com/show_bug.cgi?id=578190 Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Remove static gpio_led setup via modelTakashi Iwai2010-02-08
| | | | | | | | | | | | | | We have now a better mute-LED GPIO detection, and no need to assign the values statically per model option. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Merge HP mute-LED status callback on both IDT 92HD7x and 8x codecsTakashi Iwai2010-02-08
| | | | | | | | | | | | | | | | Merge the mute-LED status callback function for both IDT 92HD7x and 8x codecs to one function. Also it's changed to check all DACs, and called in the initialization to sync with the current status. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Detect HP mute-LED GPIO setup from GPIO countsTakashi Iwai2010-02-08
| | | | | | | | | | | | | | | | | | | | | | The GPIO pin number for the mute LED control on HP laptops can be determined more easily by checking the number of available GPIO pins of the codec chip. On a small package with up to 3 GPIOs, GPIO 0 is used while GPIO 3 is used for others. This fixes the missing mute GPIO for some HP laptops with new codecs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | Merge branch 'fix/hda' into topic/hdaTakashi Iwai2010-02-05
|\|
| * ALSA: cosmetic: make hda intel interrupt name consistent with othersMaxim Levitsky2010-02-05
| | | | | | | | | | | | | | | | | | | | | | This renames the interrupt name in /proc/interrupt. HDA Intel -> hda_intel This also eliminates space from the name, probably helping some parsers. Don't think anybody depends on this name in userspace Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: hda - Delay switching to polling mode if an interrupt was missingMaxim Levitsky2010-02-05
| | | | | | | | | | | | | | | | | | | | | | | | | | My sound codec seems sometimes (very rarely) to omit interrupts (ALC268) However, interrupt mode still works. Thus if we get timeout, poll the codec once. If we get 3 such polls in a row, then switch to polling mode. This patch is maybe an bandaid, but this might be a workaround for hardware bug. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: hda - Add an ASUS mobo to MSI blacklistTakashi Iwai2010-01-27
| | | | | | | | | | | | | | | | Sid Boyce reported that his machine locks up without enable_msi=0 option. This looks like another ASUS mobo with Nvidia combo. Reported-by: Sid Boyce <sboyce@blueyonder.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: hda - add possibility to choose speakers configuration for 4930gŁukasz Wojniłowicz2010-01-25
| | | | | | | | | | | | | | Now one can choose speaker configuration in e.g. PulseAudio mixer Signed-off-by: Łukasz Wojniłowicz <lukasz.wojnilowicz@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: hda - Fix HP T5735 automuteTakashi Iwai2010-01-20
| | | | | | | | | | | | | | | | | | This patch fixes the aut-mute setup on HP T5735 with ALC262 codec. Instead of wrong amp, use pin control toggling for muting the speaker now. Tested-by: Lee Trager <lee.trager@hp.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Add support of ALC665Kailang Yang2010-02-04
| | | | | | | | | | | | | | | | | | - Add support for ALC665 - Add more ASUS model - Modify common patch for ALC272 ALC273 ALC661 ALC662 ALC663 ALC665 Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Add ALC269VB supportKailang Yang2010-02-04
| | | | | | | | | | | | | | | | | | | | | | | | - Add new models ALC269VB_AMIC ALC269VB_DMIC - Add alc269vb_laptop_dmic_setup The record source index Dmic is 0x6 for ALC269VB. - Change eeepc words for ALC269 - Modify init_verb tables of patch_alc269 patch_alc662 patch_alc882 - Modify common patch for ALC270 ALC269VB ALC275 Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Remove superfluous init verb entries for ALC88[235]Kailang Yang2010-02-04
| | | | | | | | | | | | | | The default values are no need to be set in init_verbs. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Fix docking output for IDT 92HD8xx codecsCharles Chin2010-02-04
| | | | | | | | | | | | | | | | | | | | This patch fixes docking output support for IDT 92HD81/83/88 family codecs. Typically one of ports 0xE or 0xF is used for docking output, while only port 0xF is common on all the three codec families. We don't want the pin to select the analog mixer here. Signed-off-by: Charles Chin <Charles.Chin@idt.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Adding support for another IDT 92HD83XXX codecVitaliy Kulikov2010-02-04
| | | | | | | | | | Signed-off-by: Vitaliy Kulikov <Vitaliy.Kulikov@idt.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Add support for IDT 92HD88 family codecsCharles Chin2010-01-29
| | | | | | | | | | Signed-off-by: Charles Chin <Charles.Chin@idt.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Add mute LED check for HP laptops with IDT 92HD83xxx codecVitaliy Kulikov2010-01-28
| | | | | | | | | | | | | | This patch adds HP mute LED support for IDT 92HD81/3 family of the codecs. Signed-off-by: Vitaliy Kulikov <Vitaliy.Kulikov@idt.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Fix index of HP Compaq F700 mic ampTakashi Iwai2010-01-28
| | | | | | | | | | | | | | The amp used for the mic input on HP Compaq F700 with Cxt5051 codec has no multiple inputs, thus its index should be 0 instead of 1. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Define max number of PCM devices in hda_codec.hTakashi Iwai2010-01-28
| | | | | | | | | | | | Define the constant rather in the common header file. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Change the AZX_MAX_PCMS to 10Wei Ni2010-01-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | In hda_codec.c, it has define "[HDA_PCM_TYPE_HDMI] = { 3, 7, 8, 9, -1 },", it support up to device 9 for HDMI. But in hda_intel.c, it only define AZX_MAX_PCMS as 8. So if it have 4 hdmi codecs, when run azx_attach_pcm_stream(), it will show error "Invalid PCM device number 8", and "... number 9", and return "-EINVAL". We should change the AZX_MAX_PCMS to 10. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Allow override more fields via patch loaderTakashi Iwai2010-01-27
| | | | | | | | | | | | | | Allow the override of vendor-id, subsystem-id, revision-id and chip name via patch loading. Updated the document, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Add support for more the 8 streamsWei Ni2010-01-26
| | | | | | | | | | | | | | | | | | | | | | | | | | In azx_stream_start() and azx_stream_stop(), it use azx_readb/azx_writeb to read/write SIE, it just enable/disable 8 streams. But according to the HDA spec, it support 30 streams, and the new HDA controller will support more then 8 streams. So we should use azx_readl/azx_writel to read/write SIE. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Remove the COEF setup for ALC267/ALC268Takashi Iwai2010-01-25
| | | | | | | | | | | | | | The COEF setup for model=auto seems problematic on some laptops, resulting in the silent speaker output. Better to disable it for now. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Remove coef output in Realtek proc filesTakashi Iwai2010-01-25
| | | | | | | | | | | | | | | | The output of COEF index/value in the proc file for Realtek codecs is rather useless since the value varies together with the index. Let's get rid of it again. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Change headphone pin control with master volume on cx5051Takashi Iwai2010-01-24
| | | | | | | | | | | | | | | | The HP pin (0x16) control has to be changed dynamically depending on the master volume switch as well as the speaker pin (0x1a). Otherwise the headphone still sounds with master off. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Fix SPDIF output widget for Cxt5051 codecTakashi Iwai2010-01-24
| | | | | | | | | | | | | | Fixed the wrongly set up for SPDIF output on Conexant 5051 codec. It must point to the audio out widget instead of a pin. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - initialize mic port on cxt5051 codec dynamicallyTakashi Iwai2010-01-24
| | | | | | | | | | | | | | Initialize the mic ports B & C on Conexant 5051 codec dynamically according to the mic jack detection, instead of static init arrays. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Merge playback controls for Cx5051 codec modelsTakashi Iwai2010-01-24
| | | | | | | | | | | | | | All cx5051 codec models have the same Master playback mixer definitions. Merge them together. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Add support for Toshiba Satellite M300Takashi Iwai2010-01-24
| | | | | | | | | | | | | | | | Added the support for Toshiba Satellite M300 with Conexant 5051 codec. Since the laptop has no port C connection and the pin reports always the jack sense true, we need to ignore port-C unsol event. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Fix HP dv6736 capture mixer nameTakashi Iwai2010-01-23
| | | | | | | | | | | | Use the standard "Capture" mixer name for HP dv6736 with Cxt5051 codec. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Minor fixes for Compaq Presario F700 quirkTakashi Iwai2010-01-23
| | | | | | | | | | | | | | | | | | | | Minor fixes for HP Compaq Presario F700 quirks with Cxt5051 codec: - changed the capture mixer elements to the standard name. - fixed the quirk name string without a space - sorted the quirk list - updated the documentation Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | Merge branch 'fix/hda' into topic/hdaTakashi Iwai2010-01-19
|\| | | | | | | | | Conflicts: sound/pci/hda/patch_realtek.c
| * ALSA: hda - Turn on EAPD only if available for Realtek codecsTakashi Iwai2010-01-19
| | | | | | | | | | | | | | | | Some codecs disable widgets used for output pins and reserve as vendor- spec widgets. Thus we need to check the widget type and pin cap before actually sending SET_EAPD verbs in the auto-configuration mode. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: hda - Fix parsing pin node 0x21 on ALC259Takashi Iwai2010-01-19
| | | | | | | | | | | | | | ALC259 has a widget NID 0x21 for the output pin, but it wasn't handled properly in alc268_new_analog_output(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: hda - Fix capture on Sony VAIO with single inputTakashi Iwai2010-01-17
| | | | | | | | | | | | | | | | | | Sony VAIO VGN-P11G with ALC262 codec has only one input pin, and the recording doesn't work with model=auto because ALC262 parser sets the wrong cap NIDs to choose the route and the default route for the sole input pin wasn't initialized properly. This patch solves these issues. Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-21 00:20:34 -0500