aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
* RDMA/nes: Fix hang issues for large cluster dynamic connectionsFaisal Latif2009-04-27
| | | | | | | | | | | | | | | | | | | | | | | | Running large cluster setup, we are hanging after many hours of testing. Fixing this required going over the code and making sure the rexmit entry was properly removed based on the cm_node's state and packet received. Also when receiving a FIN packet, check seq# and make sure there were no errors before calling handle_fin(). Following are the changes done in nes_cm.c: * handle_ack_pkt() needs to return error value, so in case of error, handle_fin() is not called. Some cleanup done while going over the code. * handle_rst_pkt(), handling of cm_node's NES_CM_STATE_LAST_ACK is missing. * process_packet(), in case of FIN only packet is received, call check_seq() before processing. * in handle_fin_pkt(), we are calling cleanup_retrans_entry() for all conditions, even if the packets need to be dropped. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/nes: Increase rexmit timeout intervalFaisal Latif2009-04-27
| | | | | | | | | Under heavy load with large cluster testing, it may take longer to receive a response to MPA requests. Change the driver to wait longer after each rexmit to max time value. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/nes: Check for sequence number wrap-aroundFaisal Latif2009-04-27
| | | | | | | check_seq() was not checking if the seq#s have wrapped. Fix it. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/nes: Do not set apbvt entry for loopbackFaisal Latif2009-04-27
| | | | | | | | When a connect request comes, apbvt should only be set for non-loopback connections. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/nes: Fix unused variable compile warning when INFINIBAND_NES_DEBUG=nChien Tung2009-04-27
| | | | | | | | Remove the NES_DEBUG that is causing the compile warning about an unused variable when INFINIBAND_NES_DEBUG is not enabled. Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/nes: Fix fw_ver in /sysChien Tung2009-04-27
| | | | | | | | | /sys/class/infiniband/nes?/fw_ver is not displaying firmware version properly (it shows 0.0.0 with the current code). Fill in the correct firmware version number. Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/nes: Set trace length to 1 inch for SFP_DChien Tung2009-04-27
| | | | | | | | With updated PHY firmware for SFP_D, setting the trace length to 1 inch for SFP_D provides a more stable link. Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/nes: Enable repause timer for port 1Chien Tung2009-04-27
| | | | | | | | Enable repause timer for port 1. Without this setting, under stress, the chip may misbehave. Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/nes: Correct CDR loop filter setting for port 1Chien Tung2009-04-27
| | | | | | | | | | In commit 1b949324 ("RDMA/nes: Fix SFP+ PHY initialization") there is a mistake in the clean up code that removed port 1 CDR loop filter settings for 10G cards other than CX4. Put the correct setting back for appropriate PHY types. Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/nes: Modify thermo mitigation to flip SerDes1 ref clk to internalChien Tung2009-04-27
| | | | | | | | | Change thermo mitigation code to flip the SerDes1 reference clock to internal, to match the change in commit a4849fc1 ("RDMA/nes: Add wide_ppm_offset parm for switch compatibility"). Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/nes: Fix resource issues in nes_create_cq() and nes_destroy_cq()Miroslaw Walukiewicz2009-04-21
| | | | | | | | | | | In error paths where a CQ is not created, pbl is not freeed properly. In nes_destroy_cq(), add the corresponding check for nescq->mcrqf to not call nes_free_resource() when it is already done in nes_create_cq(). Signed-off-by: Miroslaw Walukiewicz <miroslaw.walukiewicz@intel.com> Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/nes: Remove root_256()'s unused pbl_count_256 parameterMatt Kraai2009-04-21
| | | | | | Signed-off-by: Matt Kraai <kraai@ftbfs.org> Acked-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/nes: Fix bugs in nes_reg_phys_mr()Don Wood2009-04-20
| | | | | | | | | | | | | | The code incorrectly failed memory registration if the buffer was not page aligned. Also, the length field is mangled causing the hardware to think the registration is much larger than it really is. The fix is to remove the page alignment restriction as well the incorrect length adjustment. Also make sure that all buffers after the first start at a page boundary, and all buffers except the last end on a page boundary. Signed-off-by: Don Wood <donald.e.wood@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/nes: Fix compiler warning at nes_verbs.c:1955Chien Tung2009-04-20
| | | | | | | | | | | Initialize pbl_count_256 to 0 to get rid of the warning: drivers/infiniband/hw/nes/nes_verbs.c: In function 'nes_reg_mr': drivers/infiniband/hw/nes/nes_verbs.c:1955: warning: 'pbl_count_256' may be used uninitialized in this function Reported-by: Roland Dreier <rdreier@cisco.com> Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* Merge branch 'for-linus' of ↵Linus Torvalds2009-04-20
|\ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM/Suspend: Introduce two new platform callbacks to avoid breakage
| * PM/Suspend: Introduce two new platform callbacks to avoid breakageRafael J. Wysocki2009-04-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 900af0d973856d6feb6fc088c2d0d3fde57707d3 (PM: Change suspend code ordering) changed the ordering of suspend code in such a way that the platform .prepare() callback is now executed after the device drivers' late suspend callbacks have run. Unfortunately, this turns out to break ARM platforms that need to talk via I2C to power control devices during the .prepare() callback. For this reason introduce two new platform suspend callbacks, .prepare_late() and .wake(), that will be called just prior to disabling non-boot CPUs and right after bringing them back on line, respectively, and use them instead of .prepare() and .finish() for ACPI suspend. Make the PM core execute the .prepare() and .finish() platform suspend callbacks where they were executed previously (that is, right after calling the regular suspend methods provided by device drivers and right before executing their regular resume methods, respectively). It is not necessary to make analogous changes to the hibernation code and data structures at the moment, because they are only used by ACPI platforms. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Len Brown <len.brown@intel.com>
* | Merge branch 'drm-linus' of ↵Linus Torvalds2009-04-20
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: agp: zero pages before sending to userspace drm: check for minor master before allowing drop master. drm: set/clear is_master when master changed drm: clean dirty memory after device release drm: count reaches -1
| * | agp: zero pages before sending to userspaceShaohua Li2009-04-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | AGP pages might be mapped into userspace finally, so the pages should be set to zero before userspace can use it. Otherwise there is potential information leakage. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | drm: check for minor master before allowing drop master.Dave Airlie2009-04-19
| | | | | | | | | | | | | | | | | | | | | When fast user switching a lot eventually we get to the point, where we were checking for the wrong thing in this function. Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | drm: set/clear is_master when master changedJonas Bonn2009-04-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | The variable is_master is being used to track the drm_file that is currently master, so its value needs to be updated accordingly when the master is changed. Signed-off-by: Jonas Bonn <jonas@southpole.se> Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | drm: clean dirty memory after device releaseMa Ling2009-04-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In current code we register/unregister connector object by drm_sysfs_connector_add/remove function. However under some cases, we need to dynamically register or unregister device multiple times, so we have to go through register -> unregister ->register routine. Because after device_unregister function our memory is dirty, we need to do clean operation in order to re-register the device, otherwise the system will crash. The patch intends to clean device after device release. Signed-off-by: Ma Ling <ling.ma@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | drm: count reaches -1Roel Kluin2009-04-19
| | | | | | | | | | | | | | | | | | | | | | | | With a postfix decrement in the test count will reach -1 rather than 0, subsequent tests fail. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | | Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds2009-04-20
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://neil.brown.name/md: md: support bitmaps on RAID10 arrays larger then 2 terabytes md: update sync_completed and reshape_position even more often. md: improve usefulness and accuracy of sysfs file md/sync_completed. md: allow setting newly added device to 'in_sync' via sysfs. md: tiny md.h cleanups
| * | | md: support bitmaps on RAID10 arrays larger then 2 terabytesNeilBrown2009-04-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | .. and other arrays with components larger than 2 terabytes. We use a "long" rather than a "sector_t" in part of the bitmap size calculations, which is sad. Reported-by: "Mario 'BitKoenig' Holbe" <Mario.Holbe@TU-Ilmenau.DE> Signed-off-by: NeilBrown <neilb@suse.de>
| * | | md: update sync_completed and reshape_position even more often.NeilBrown2009-04-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are circumstances when a user-space process might need to "oversee" a resync/reshape process. For example when doing an in-place reshape of a raid5, it is prudent to take a backup of each section before reshaping it as this is the only way to provide safety against an unplanned shutdown (i.e. crash/power failure). The sync_max sysfs value can be used to stop the resync from advancing beyond a particular point. So user-space can: suspend IO to the first section and back it up set 'sync_max' to the end of the section wait for 'sync_completed' to reach that point resume IO on the first section and move on to the next section. However this process requires the kernel and user-space to run in lock-step which could introduce unnecessary delays. It would be better if a 'double buffered' approach could be used with userspace and kernel space working on different sections with the 'next' section always ready when the 'current' section is finished. One problem with implementing this is that sync_completed is only guaranteed to be updated when the sync process reaches sync_max. (it is updated on a time basis at other times, but it is hard to rely on that). This defeats some of the double buffering. With this patch, sync_completed (and reshape_position) get updated as the current position approaches sync_max, so there is room for userspace to advance sync_max early without losing updates. To be precise, sync_completed is updated when the current sync position reaches half way between the current value of sync_completed and the value of sync_max. This will usually be a good time for user space to update sync_max. If sync_max does not get updated, the updates to sync_completed (together with associated metadata updates) will occur at an exponentially increasing frequency which will get unreasonably fast (one update every page) immediately before the process hits sync_max and stops. So the update rate will be unreasonably fast only for an insignificant period of time. Signed-off-by: NeilBrown <neilb@suse.de>
| * | | md: improve usefulness and accuracy of sysfs file md/sync_completed.NeilBrown2009-04-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The sync_completed file reports how much of a resync (or recovery or reshape) has been completed. However due to the possibility of out-of-order completion of writes, it is not certain to be accurate. We have an internal value - mddev->curr_resync_completed - which is an accurate value (though it might not always be quite so uptodate). So: - make curr_resync_completed be uptodate a little more often, particularly when raid5 reshape updates status in the metadata - report curr_resync_completed in the sysfs file - allow poll/select to report all updates to md/sync_completed. This makes sync_completed completed usable by any external metadata handler that wants to record this status information in its metadata. Signed-off-by: NeilBrown <neilb@suse.de>
| * | | md: allow setting newly added device to 'in_sync' via sysfs.NeilBrown2009-04-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When adding devices to an active array via sysfs, there is currently no way to mark a device as 'in-sync' which is useful when incrementally assembling an array. So add that option. Signed-off-by: NeilBrown <neilb@suse.de>
| * | | md: tiny md.h cleanupsChristoph Hellwig2009-04-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - update inclusion guard and make sure it covers the whole file - remove superflous #ifdef CONFIG_BLOCK - make sure all required headers are included so that new users aren't required to include others before Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: NeilBrown <neilb@suse.de>
* | | | FS-Cache: Add MAINTAINERS record for FS-Cache and CacheFilesDavid Howells2009-04-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add MAINTAINERS record for FS-Cache and CacheFiles. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | FRV: Don't attempt to #include <linux/blk.h> as it doesn't existDavid Howells2009-04-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Stop the FRV arch from attempting to #include <linux/blk.h> as it doesn't exist. Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | driver: dont update dev_name via device_add pathKay Sievers2009-04-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | notice one system /proc/iomem some entries missed the name for pci_devices it turns that dev->dev.kobj name is changed after device_add. for pci code: via acpi_pci_root_driver.ops.add (aka acpi_pci_root_add) ==> pci_acpi_scan_root is used to scan pci bus/device, and at the same time we read the resource for pci_dev in the pci_read_bases, we have res->name = pci_name(pci_dev); pci_name is calling dev_name. later via acpi_pci_root_driver.ops.start (aka acpi_pci_root_start) ==> pci_bus_add_device to add all pci_dev in kobj tree. pci_bus_add_device will call device_add. actually in device_add /* first, register with generic layer. */ error = kobject_add(&dev->kobj, dev->kobj.parent, "%s", dev_name(dev)); if (error) goto Error; will get one new name for that kobj, old name is freed. [Impact: fix corrupted names in /proc/iomem ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | Merge ↵Linus Torvalds2009-04-19
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguest-and-virtio * git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguest-and-virtio: lguest: document 32-bit and PAE requirements lguest: tell git to ignore Documentation/lguest/lguest virtio: fix suspend when using virtio_balloon lguest: fix guest crash on non-linear addresses in gdt pvops lguest: fix crash on vmlinux images
| * | | | lguest: document 32-bit and PAE requirementsRusty Russell2009-04-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Robert noted that we don't actually document that lguest is 32-bit only, nor that PAE must be off (CONFIG_PAE is now prompted for if HIGHMEM is set to "off). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: lguest@ozlabs.org Cc: "Robert P. J. Day" <rpjday@crashcourse.ca>
| * | | | lguest: tell git to ignore Documentation/lguest/lguestMatt Kraai2009-04-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the example lguest launcher binary. Signed-off-by: Matt Kraai <kraai@ftbfs.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | | | virtio: fix suspend when using virtio_balloonMarcelo Tosatti2009-04-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Break out of wait_event_interruptible() if freezing has been requested, in the vballoon thread. Without this change vballoon refuses to stop and the system can't suspend. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: stable@kernel.org
| * | | | lguest: fix guest crash on non-linear addresses in gdt pvopsRusty Russell2009-04-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes guest crash 'lguest: bad read address 0x4800000 len 256' The new per-cpu allocator ends up handing a non-linear address to write_gdt_entry. We do __pa() on it, and hand it to the host, which kills us. I've long wanted to make the hypercall "LOAD_GDT_ENTRY" to match the IDT code, but had no pressing reason until now. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: lguest@ozlabs.org
| * | | | lguest: fix crash on vmlinux imagesMatias Zabaljauregui2009-04-19
| | |_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Typical message: 'lguest: unhandled trap 6 at 0x418726 (0x0)' vmlinux guests were broken by 4cd8b5e2a159f18a1507f1187b44a1acbfa6341b 'lguest: use KVM hypercalls', which rewrites guest text from kvm hypercalls to trap 31. The Launcher mmaps the kernel image. The Guest executes and immediately faults in the first text page (read-only). Then it hits a hypercall, and we rewrite that hypercall, causing a copy-on-write. But the Guest pagetables still refer to the old page: we fault again, but as Host we see the hypercall already rewritten, and pass the fault back to the Guest. The Guest hasn't set up an IDT yet, so we kill it. This doesn't happen with bzImages: they unpack themselves and so the text pages are already read-write. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Tested-by: Patrick McHardy <kaber@trash.net>
* | | | Merge branch 'for-linus' of ↵Linus Torvalds2009-04-19
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Set function_id only on FG nodes ALSA: MAINTAINERS - Update SOUND ALSA: emu10k1 - off by 1 in snd_emu10k1_wait() ASoC: OMAP: Fix FS polarity in OSK5912 machine driver ASoC: OMAP: Fix DSP_B format in OMAP McBSP DAI driver ASoC: Fix include build error in s3c2412-i2s.c ASoC: Fix s3c-i2s-v2.c snd_soc_dai changes ASoC: s3c-i2s-v2.c fix for s3c_i2sv2_iis_calc_rate ASoC: Fix jive_wm8750.c build problems ASoC: pxa-ssp: allow setting of dai format 0 ALSA: hda - Add upper-limit of mixer amp for AD1884A-laptop model, too ALSA: hda - Fix headphone-detection on some machines with STAC/IDT codecs ALSA: Intel8x0: Add hp_only quirk for SSID 0x1028016a (Dell Inspiron 8600) ALSA: Intel8x0: Remove conflicting quirk for SSID 0x103c0934 ALSA: hda_intel.c - Consolidate bitfields
| * \ \ \ Merge branch 'fix/misc' into for-linusTakashi Iwai2009-04-19
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * fix/misc: ALSA: MAINTAINERS - Update SOUND ALSA: emu10k1 - off by 1 in snd_emu10k1_wait()
| | * | | | ALSA: MAINTAINERS - Update SOUNDJoe Perches2009-04-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | ALSA: emu10k1 - off by 1 in snd_emu10k1_wait()Roel Kluin2009-04-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With `while (count++ < 16384)' count reaches 16385. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | | | | Merge branch 'fix/intel8x0' into for-linusTakashi Iwai2009-04-19
| |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * fix/intel8x0: ALSA: Intel8x0: Add hp_only quirk for SSID 0x1028016a (Dell Inspiron 8600) ALSA: Intel8x0: Remove conflicting quirk for SSID 0x103c0934
| | * | | | | ALSA: Intel8x0: Add hp_only quirk for SSID 0x1028016a (Dell Inspiron 8600)Daniel T Chen2009-04-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Subject says it all. Briefly, use hp_only for another Dell Inspiron 8600. Reference: Ubuntu #41015 (https://launchpad.net/bugs/41015) Signed-off-by: Daniel T Chen <seven.steps@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | ALSA: Intel8x0: Remove conflicting quirk for SSID 0x103c0934Daniel T Chen2009-04-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While cleaning up quirks, I noticed that there is a duplicated quirk for the SSID 0x103c0934. Looking back through the bug reports, I've concluded that there is only one necessary quirk (hp_mute_led), so this patch removes the conflicting one. Reference: Ubuntu #44066 (https://launchpad.net/bugs/44066) Signed-off-by: Daniel T Chen <seven.steps@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | | | | | Merge branch 'fix/hda' into for-linusTakashi Iwai2009-04-19
| |\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * fix/hda: ALSA: hda - Set function_id only on FG nodes ALSA: hda - Add upper-limit of mixer amp for AD1884A-laptop model, too ALSA: hda - Fix headphone-detection on some machines with STAC/IDT codecs ALSA: hda_intel.c - Consolidate bitfields
| | * | | | | | ALSA: hda - Set function_id only on FG nodesTakashi Iwai2009-04-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | (Re)set function_id only from the value on FG nodes. The current code overrides the value with the last widget. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | ALSA: hda - Add upper-limit of mixer amp for AD1884A-laptop model, tooTakashi Iwai2009-04-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the upper-limit of mixer amp for AD1884A-laptop model just like the mobile model for some HP laptops. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | ALSA: hda - Fix headphone-detection on some machines with STAC/IDT codecsTakashi Iwai2009-04-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the headphone can have no unique DAC, the current code doesn't check the HP-detection although it should. Put the hp-detection check before the DAC check to fix this bug. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | ALSA: hda_intel.c - Consolidate bitfieldsJoe Perches2009-04-16
| | |/ / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit fa00e046b41663cbda9b1affc0594669e5f14219 added a new bitfield not adjacent to other bitfields in the same struct. Moved the new one. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | | | | | Merge branch 'fix/asoc' into for-linusTakashi Iwai2009-04-19
| |\ \ \ \ \ \ | | |_|_|/ / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * fix/asoc: ASoC: OMAP: Fix FS polarity in OSK5912 machine driver ASoC: OMAP: Fix DSP_B format in OMAP McBSP DAI driver ASoC: Fix include build error in s3c2412-i2s.c ASoC: Fix s3c-i2s-v2.c snd_soc_dai changes ASoC: s3c-i2s-v2.c fix for s3c_i2sv2_iis_calc_rate ASoC: Fix jive_wm8750.c build problems ASoC: pxa-ssp: allow setting of dai format 0
generated by cgit v1.2.2 (git 2.25.0) at 2025-08-05 12:13:10 -0400