aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
* [MIPS] Remove Atlas and SEAD from feature-removal-schedule.Ralf Baechle2006-10-03
| | | | | | Maciej has started fixing the code for these platforms. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Remove Jaguar and Ocelot family from feature list.Ralf Baechle2006-10-03
| | | | | | There are remaining users with interest in the platform after all. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] BCM1250: TRDY timeout tweaks for Broadcom SiByte systemsMaciej W. Rozycki2006-10-03
| | | | | | | | | | | | | | | | | | | | | | It was obesrved that at least one older PCI card predating the requirement for the TRDY signal to respond within 16 clock ticks actually does not meet this rule nor even the power-on defaults of the PCI bridges found in development systems built around the Broadcom SiByte SOCs. Here is a patch that bumps up the timeout to the highest finite value supported by these chips, which is 255 clock ticks. The bridges affected are the SiByte SOC itself and the SP1011. This change does not effectively affect systems only having PCI option cards installed that meet the TRDY requirement of the current PCI spec. The rule was introduced with PCI 2.1, so any older card may make the system affected. If this is the case, performance of the system will suffer in return for the card working at all. If this is a concern, then the solution is not to use such cards. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> ---
* [MIPS] Remove dead DECstation boot codeMaciej W. Rozycki2006-10-03
| | | | | | | | Code in arch/mips/dec/boot/ has been dead for long. Let's get rid of it before some epidemic spreads. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Let gcc align 'struct pt_regs' on 8 bytes boundaryFranck Bui-Huu2006-10-03
| | | | | | | | | | | | | The stack pointer in MIPS/gcc should always 8 bytes aligned on entry to any routines. Therefore pt_regs structure must be aligned to 8-byte boundary too. Instead of creating dummy fields to achieve this alignment, this patch let gcc doing it. Therefore 'smtc_pad' field can be safely removed. Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* x86: Fix booting with "no387 nofxsr"Linus Torvalds2006-10-03
| | | | | | | | | | | | | | | | | | | | | | Jesper Juhl reported that testing the software math-emulation by forcing "no387" doesn't work on modern CPU's. The reason was two-fold: - you also need to pass in "nofxsr" to make sure that we not only don't touch the old i387 legacy hardware, it also needs to disable the modern XMM/FXSR sequences - "nofxsr" didn't actually clear the capability bits immediately, leaving the early boot sequence still using FXSR until we got to the identify_cpu() stage. This fixes the "nofxsr" flag to take effect immediately on the boot CPU. Debugging by Randy Dunlap Acked-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Jesper Juhl <jesper.juhl@gmail.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2006-10-03
|\ | | | | | | | | | | | | | | | | | | * 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3848/1: pxafb: Add option of fixing video modes and spitz QVGA mode support [ARM] 3880/1: remove the last trace of iop31x support [ARM] 3879/1: ep93xx: instantiate platform devices for ep93xx ethernet [ARM] 3809/3: get rid of 4 megabyte kernel image size limit [ARM] Fix XIP_KERNEL build error in arch/arm/mm/mmu.c [ARM] 3874/1: Remove leftover usage of asm/timeofday.h
| * [ARM] 3848/1: pxafb: Add option of fixing video modes and spitz QVGA mode ↵Richard Purdie2006-10-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | support Add the ability to have pxafb use only certain fixed video modes (selected on a per platform basis). This is useful on production hardware such as the Zaurus cxx00 models where the valid modes are known in advance and any other modes could result in hardware damage. Following this, add support for the cxx00 QVGA mode. Mode information is passed to the lcd_power call to allowing the panel drivers to configure the display hardware accordingly (corgi_lcd already contains the functionality for the cxx00 panel). This mirrors the setup already used by w100fb. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [ARM] 3880/1: remove the last trace of iop31x supportLennert Buytenhek2006-09-30
| | | | | | | | | | | | | | Remove the last trace of iop31x support from the kernel. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [ARM] 3879/1: ep93xx: instantiate platform devices for ep93xx ethernetLennert Buytenhek2006-09-30
| | | | | | | | | | | | | | | | Instantiate platform devices for the ep93xx ethernet driver in a couple of ep93xx board support files. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [ARM] 3809/3: get rid of 4 megabyte kernel image size limitLennert Buytenhek2006-09-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We currently have a hardcoded 4 megabyte uncompressed kernel image size limit, which is easily exceeded by, for example, enabling some of the various kernel debugging options. When setting up the initial page tables (which is where this 4M limit is hardcoded), it's actually relatively easy to find out the true size of the uncompressed kernel image and create enough page table entries for things to fit, so this patch makes it so. In the decompressor, we also need to know the size of the uncompressed kernel image, to figure out whether there is any chance that uncompressing the kernel might overwrite the compressed kernel image stored elsewhere in memory. We don't have that info at this boot stage, though, so we approximate the size of the uncompressed kernel by taking the compressed kernel image size and allowing for a maximum 4x expansion. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [ARM] Fix XIP_KERNEL build error in arch/arm/mm/mmu.cRussell King2006-09-30
| | | | | | | | | | | | | | XIP kernels need to know the start/end of text, but we were missing the declaration of _etext in mmu.c. Add it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [ARM] 3874/1: Remove leftover usage of asm/timeofday.hKevin Hilman2006-09-29
| | | | | | | | | | Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds2006-10-03
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'devel' of master.kernel.org:/home/rmk/linux-2.6-serial: (21 commits) [SERIAL] add PNP IDs for FPI based touchscreens [SERIAL] Magic SysRq SAK does nothing on serial consoles [SERIAL] tickle NMI watchdog on serial output. [SERIAL] Fix oops when removing suspended serial port [SERIAL] Fix resume handling bug [SERIAL] Remove wrong asm/serial.h inclusions [SERIAL] CONFIG_PM=n slim: drivers/serial/8250_pci.c [SERIAL] OMAP1510 serial fix for 115200 baud [SERIAL] returning proper error from serial core driver [SERIAL] Make uart_line_info() correctly tell MMIO from I/O port [SERIAL] suspend/resume handlers don't have level arg anymore [SERIAL] 8250 resourse management fixes [SERIAL] serial_cs: Add quirk for brainboxes 2-port RS232 card [SERIAL] serial_cs: handle Nokia multi->single port bodge via config quirk [SERIAL] serial_cs: add configuration quirk [SERIAL] serial_cs: Convert Oxford 950 / Possio GCC wakeup quirk [SERIAL] serial_cs: convert IBM post-init handling to a quirk [SERIAL] serial_cs: allow wildcarded quirks [SERIAL] serial_cs: convert multi-port table to quirk table [SERIAL] serial_cs: Use clean up multiport card detection ...
| * | [SERIAL] add PNP IDs for FPI based touchscreensMatthew Garrett2006-10-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Compaq TC1000 and Fujitsu Stylistic range of tablet machines use touchscreens from FPI. These are implemented as serial interfaces, generally exposed in the ACPIPNP information on the system. This patch adds them to the 8250_pnp driver tables, avoiding the need to mess around with setserial to set them up. I haven't been able to confirm what FUJ02B5, FUJ02BA and FUJ02BB are. FUJ02B1 refers to the controller for the system hotkeys. FUJ02BC appears to be the last in the range - after this, they moved to Wacom-based systems. Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [SERIAL] Magic SysRq SAK does nothing on serial consolesSimon Tatham2006-10-01
| | | | | | | | | | | | | | | | | | | | | Make sysrq-K work on serial console by passing in the tty. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [SERIAL] tickle NMI watchdog on serial output.Dave Jones2006-10-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Serial is _slow_ sometimes. So slow, that the NMI watchdog kicks in. NMI Watchdog detected LOCKUP on CPU2CPU 2 Modules linked in: loop usb_storage md5 ipv6 parport_pc lp parport autofs4 i2c_dev i2c_core rfcomm l2cap bluetooth sunrpc pcdPid: 3138, comm: gpm Not tainted 2.6.11-1.1290_FC4smp RIP: 0010:[<ffffffff80273b8a>] <ffffffff80273b8a>{serial_in+106} RSP: 0018:ffff81003afc3d50 EFLAGS: 00000002 RAX: 0000000000000020 RBX: 0000000000000020 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff804dcd60 RBP: 00000000000024fc R08: 000000000000000a R09: 0000000000000033 R10: ffff81001beb7c20 R11: 0000000000000020 R12: ffffffff804dcd60 R13: ffffffff804ade76 R14: 000000000000002b R15: 000000000000002c FS: 00002aaaaaac4920(0000) GS:ffffffff804fca00(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00002aaaaabcb000 CR3: 000000003c0d0000 CR4: 00000000000006e0 Process gpm (pid: 3138, threadinfo ffff81003afc2000, task ffff81003eb63780) Stack: ffffffff80275f2e 0000000000000000 ffffffff80448380 0000000000007d6b 000000000000002c fffffffffffffbbf 0000000000000292 0000000000008000 ffffffff80138e8c 0000000000007d97 Call Trace:<ffffffff80275f2e>{serial8250_console_write+270} <ffffffff80138e8c>{__call_console_drivers+76} <ffffffff8013914b>{release_console_sem+315} <ffffffff80260325>{con_open+149} <ffffffff80254e99>{tty_open+537} <ffffffff80192713>{chrdev_open+387} <ffffffff80188824>{dentry_open+260} <ffffffff80188994>{filp_open+68} <ffffffff80187b73>{get_unused_fd+227} <ffffffff80188a6c>{sys_open+76} <ffffffff8010ebc6>{tracesys+209} Code: 0f b6 c0 c3 66 90 41 57 49 89 f7 41 56 41 be 00 01 00 00 41 console shuts up ... I initially did the patch below a year ago for the Fedora kernel, and have been keeping it up to date since. I recently got the same thing happening on a vanilla kernel, so figured it was time to repost this. Signed-off-by: Dave Jones <davej@redhat.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [SERIAL] Fix oops when removing suspended serial portRussell King2006-10-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A serial card might have been removed when the system is resumed. This results in a suspended port being shut down, which results in the ports shutdown method being called twice in a row. This causes BUGs. Avoid this by tracking the suspended state separately from the initialised state. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [SERIAL] Fix resume handling bugRussell King2006-10-01
| | | | | | | | | | | | | | | | | | | | | | | | Unfortunately, pcmcia_dev_present() returns false when a device is suspended, so checking this on resume does not work too well. Omit this test. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [SERIAL] Remove wrong asm/serial.h inclusionsRussell King2006-10-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | asm/serial.h is supposed to contain the definitions for the architecture specific 8250 ports for the 8250 driver. It may also define BASE_BAUD, but this is the base baud for the architecture specific ports _only_. Therefore, nothing other than the 8250 driver should be including this header file. In order to move towards this goal, here is a patch which removes some of the more obvious incorrect includes of the file. Acked-by: Paul Fulghum <paulkf@microgate.com> Acked-by: Tony Luck <tony.luck@intel.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [SERIAL] CONFIG_PM=n slim: drivers/serial/8250_pci.cAlexey Dobriyan2006-10-01
| | | | | | | | | | | | | | | | | | | | | | | | Remove some code which is unneeded if CONFIG_PM=n. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [SERIAL] OMAP1510 serial fix for 115200 baudJonathan McDowell2006-10-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch below is necessary for 115200 baud on an OMAP1510 internal UART. It's been in the linux-omap tree for some time and with it applied to a vanilla Linus git tree the serial console on the Amstrad Delta (which is OMAP1510 based and whose initial bootloader runs at 115200) works fine (it doesn't without it). Signed-off-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [SERIAL] returning proper error from serial core driverRam Gupta2006-10-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the issue of returning 0 even in case of error from uart_set_info function. Now it returns the error EBUSY when it can not set new port. Signed-off-by: Ram Gupta <r.gupta@astronautics.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [SERIAL] Make uart_line_info() correctly tell MMIO from I/O portSergei Shtylyov2006-10-01
| | | | | | | | | | | | | | | | | | | | | | | | /proc/tty/driver/serial incorrectly claims that UARTs having iotype of UPIO_MEM32, UPIO_AU, or UPIO_TSI are I/O mapped. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [SERIAL] suspend/resume handlers don't have level arg anymoreSergei Shtylyov2006-10-01
| | | | | | | | | | | | | | | | | | | | | | | | 8250.c and serial_txx9.c port suspend/resume handler still have this obsolete argument documented... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [SERIAL] 8250 resourse management fixesSergei Shtylyov2006-10-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I think register ranges obviously need to be claimed/released for all UARTs including those with UPIO_MEM32 and UPIO_TSI iotype. Also, serial8250_request_rsa_resources() returns false positives with UPIO_MEM32, UPIO_AU, and UPIO_TSI iotype -- I don't think this makes any sense. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [SERIAL] serial_cs: Add quirk for brainboxes 2-port RS232 cardRussell King2006-10-01
| | | | | | | | | | | | | | | | | | | | | | | | Mauro Ziliani reports that this card has a higher clock rate. Rather than tweak the 8250 driver to handle this, add a quirk to pass the correct clock rate to the driver. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [SERIAL] serial_cs: handle Nokia multi->single port bodge via config quirkRussell King2006-10-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to the existing code, Nokia only make single-port cards, but are detected as multi-port cards. Handle this in roughly the same way via the config quirk - forcing it to be a real single port card (info->multi=0) changes the way we allocate the IO memory, which might stop the card working. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [SERIAL] serial_cs: add configuration quirkRussell King2006-10-01
| | | | | | | | | | | | | | | | | | | | | Add a quirk primerily to handle tweaks to the link->conf structure, eg as required for Socket cards. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [SERIAL] serial_cs: Convert Oxford 950 / Possio GCC wakeup quirkRussell King2006-10-01
| | | | | | | | | | | | | | | | | | | | | Move the Oxford Semi OX950 / Possio GCC wakeup handling to a quirk wakeup handler. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [SERIAL] serial_cs: convert IBM post-init handling to a quirkRussell King2006-10-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | Move IBM quirk handling into its own quirk entry. Note that doing quirk handling after we've registered the ports is racy, but since I don't know if moving this will have an undesired effect, it's probably better to leave where it is. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [SERIAL] serial_cs: allow wildcarded quirksRussell King2006-10-01
| | | | | | | | | | | | | | | | | | | | | | | | Some quirks we will introduce next apply to (eg) all cards of one manufacturer. Therefore, we need a way to list these in the quirk table - use ~0 - this is not a possible device ID value. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [SERIAL] serial_cs: convert multi-port table to quirk tableRussell King2006-10-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - rename multi_id table to serial_quirk / quirks[] - use named initialisers - store a pointer to the quirk table in the serial_info structure so we can use the quirk table entry later. - apply multi-port quirk after the multi-port guessing code, but only if it's != -1. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [SERIAL] serial_cs: Use clean up multiport card detectionRussell King2006-10-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Use ARRAY_SIZE() instead of home grown based version. - use parse->manfid.card rather than le16_to_cpu(buf[1]) - manfid.card is already converted to this format. - use info->prodid in subsequent tests rather than parse->manfid.card. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [SERIAL] Remove m32r_sio dependency on asm/serial.hRussell King2006-10-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | m32r_sio re-uses a custom defined BASE_BAUD from asm/serial.h, and replaces SERIAL_PORT_DFNS with its own driver private copy. Since asm/serial.h is supposed to define 8250-based ports using these symbols, this isn't a sane idea. Hence, eliminate asm/serial.h from m32r_sio.c. Acked-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds2006-10-03
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Fixup __raw_read_trylock(). sh: Kill off remaining config.h references. sh: Initial gitignore list sh: build fixes for defconfigs. sh: Kill off more dead headers. sh: Set pclk default for SH7705. sh: defconfig updates.
| * | | sh: Fixup __raw_read_trylock().Paul Mundt2006-10-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | generic__raw_read_trylock() was broken, fix up the __raw_read_trylock() implementation for something sensible. Taken from m32r, which has the same use cases. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | | sh: Kill off remaining config.h references.Paul Mundt2006-10-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | A few of these managed to sneak back in, get rid of them once and for all. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | | sh: Initial gitignore listPaul Mundt2006-10-03
| | | | | | | | | | | | | | | | | | | | | | | | Ignore build-time generated files. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | | sh: build fixes for defconfigs.Paul Mundt2006-10-03
| | | | | | | | | | | | | | | | | | | | | | | | Get all of the defconfigs building again. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | | sh: Kill off more dead headers.Paul Mundt2006-10-03
| | | | | | | | | | | | | | | | | | | | | | | | Some old rtc and io headers were left hanging around, kill them off.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | | sh: Set pclk default for SH7705.Paul Mundt2006-10-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | CPU sub-types set the pclk default in Kconfig, add one for SH7705. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | | sh: defconfig updates.Paul Mundt2006-10-03
| | | | | | | | | | | | | | | | | | | | | | | | Sync up all of the defconfigs, and kill off a few old ones.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* | | | Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6Linus Torvalds2006-10-03
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6: sh64: Remove me from sh64 maintainers. sh64: Update cayman defconfig.
| * | | | sh64: Remove me from sh64 maintainers.Richard Curnow2006-10-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Drop Richard as a co-maintainer, as he no longer has interest in working on the platform. Signed-off-by: Richard Curnow <rc@rc0.org.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | | | sh64: Update cayman defconfig.Paul Mundt2006-10-03
| |/ / / | | | | | | | | | | | | | | | | | | | | This fell behind a bit, update it. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* | | | Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds2006-10-03
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Update defconfig. [SPARC64]: Do not include compat.h from asm-sparc64/signal.h any more. [SPARC64]: Move signal compat bits to new header file.
| * | | | [SPARC64]: Update defconfig.David S. Miller2006-10-02
| | | | | | | | | | | | | | | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | [SPARC64]: Do not include compat.h from asm-sparc64/signal.h any more.David S. Miller2006-10-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It's not needed, now that all of that stuff is now in asm/compat_signal.h, and it breaks the build too :-) Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | [SPARC64]: Move signal compat bits to new header file.David S. Miller2006-10-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Create asm-sparc64/compat_signal.h and stuff things there. This avoids the "linux/compat.h includes asm/signal.h but asm/signal.h needs compat_sigset_t which isn't defined yet" problems introduced recently. Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-15 13:51:13 -0500