aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
* mfd: Fix section mismatch in da903xMark Brown2009-01-04
| | | | | | | | | | The subdevice removal functions are marked __devexit but are referenced from the error handling path when probing so are needed even when __devexit functions are removed. Signed-off-by: Mark Brown <broonie@sirena.org.uk> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
* mfd: move drivers/i2c/chips/menelaus.c to drivers/mfdDavid Brownell2009-01-04
| | | | | | | | | | | | ove the menelaus driver from drivers/i2c/chips to drivers/mfd since it's more of a multi-function device than anything else, and since Jean is trying to vanish drivers/i2c/chips ASAP. One way to think of these chips are as the PMIC family most used with OMAP2 generation chips. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
* mfd: move drivers/i2c/chips/tps65010.c to drivers/mfdDavid Brownell2009-01-04
| | | | | | | | | | | | Move the tps65010 driver from drivers/i2c/chips to drivers/mfd since it's more of a multi-function device than anything else, and since Jean is trying to vanish drivers/i2c/chips ASAP. One way to think of these chips are as the PMIC family most used with OMAP1 generation chips. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
* mfd: dm355evm msp430 driverDavid Brownell2009-01-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Basic MFD framework for the MSP430 microcontroller firmware used on the dm355evm board: - Provides an interface for other drivers: register read/write utilities, and register declarations. - Directly exports: * Many signals through the GPIO framework + LEDs + SW6 through gpio sysfs + NTSC/nPAL jumper through gpio sysfs + ... more could be added later, e.g. MMC signals * Child devices: + LEDs, via leds-gpio child (and default triggers) + RTC, via rtc-dm355evm child device + Buttons and IR control, via dm355evm_keys - Supports power-off system call. Use the reset button to power the board back up; the power supply LED will be on, but the MSP430 waits to re-activate the regulators. - On probe() this: * Announces firmware revision * Turns off the banked LEDs * Exports the resources noted above * Hooks the power-off support * Muxes tvp5146 -or- imager for video input Unless the new tvp514x driver (tracked for mainline) is configured, this assumes that some custom imager driver handles video-in. This completely ignores the registers reporting the output voltages on the various power supplies. Someone could add a hwmon interface if that seems useful. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
* mfd: Add missing break from wm3850-coreMark Brown2009-01-04
| | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
* mfd: Add WM8351 supportMark Brown2009-01-04
| | | | | | | | The WM8351 is a WM8350 variant. As well as register default changes the WM8351 has fewer voltage and current regulators than the WM8350. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
* mfd: Support configurable numbers of DCDCs and ISINKs on WM8350Mark Brown2009-01-04
| | | | | | | | Some WM8350 variants have fewer DCDCs and ISINKs. Identify these at probe and refuse to use the absent DCDCs when running on these chips. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
* mfd: Handle missing WM8350 platform dataMark Brown2009-01-04
| | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
* mfd: Add WM8352 supportMark Brown2009-01-04
| | | | | | | | The WM8352 is a variant of the WM8350. Aside from the register defaults there are no software visible differences to the WM8350. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
* mfd: Use irq_to_desc in twl4030 codeSamuel Ortiz2009-01-04
| | | | | | | | The global irq_desc array is soon going to be accessible only with !CONFIG_SPARSE_IRQ. We should start using the generic irq_to_desc() routines instead. Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
* power_supply: Add Dialog DA9030 battery charger driverMike Rapoport2009-01-04
| | | | | | | | Driver for battery charger integrated into Dialog Semiconductor DA9030 PMIC Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
* mfd: Dialog DA9030 battery charger MFD driverMike Rapoport2009-01-04
| | | | | | | | This patch amends DA903x MFD driver with definitions and methods needed for battery charger driver. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
* mfd: Register WM8400 codec deviceMark Brown2009-01-04
| | | | | | | | | | Register a child device for the codec in the WM8400. Also switch the unregistration of the MFD devices to use the MFD core since the current code is hand rolling the same thing. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
* mfd: Pass driver_data onto child devicesMark Brown2009-01-04
| | | | | | | | The MFD cell structure provides a driver_data field but doesn't pass it on to the child devices when instantiating them - do that. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
* mfd: Fix twl4030-core.c build errorSamuel Ortiz2009-01-04
| | | | | | | | | | | This is a fix for: twl4030-core.c:(.text+0x16a797): undefined reference to `clk_get_rate' twl4030-core.c:(.text+0x16a797): undefined reference to `clk_put' on x86 and x86_64, as the clock API is not defined on those platforms. Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
* mfd: twl4030 regulator bug fixesDavid Brownell2009-01-04
| | | | | | | | | | | | | | This contains two bugfixes to the initial twl4030 regulator support patch related to USB: (a) always overwrite the old list of consumers ... else the regulator handles all use the same "usb1v5" name; (b) don't set up the "usbcp" regulator, which turns out to be managed through separate controls, usually ULPI directly from the OTG controller. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
* mfd: twl4030: create some regulator devicesDavid Brownell2009-01-04
| | | | | | | | | | | | | | | | | | | | | | | | | Initial code to create twl4030 voltage regulator devices, using the new regulator framework. Note that this now starts to care what name is used to declare the TWL chip: - TWL4030 is the "old" chip; newer ones have a bigger variety of VAUX2 voltages. - TWL5030 is the core "new" chip; TPS65950 is its catalog version. - The TPS65930 and TPS65920 are cost-reduced catalog versions of TWL5030 parts ... fewer regulators, no battery charger, etc. Board-specific regulator configuration should be provided, listing which regulators are used and their constraints (e.g. 1.8V only). Code that could ("should"?) leverage the regulator stuff includes TWL4030 USB transceiver support and MMC glue, LCD support for the 3430SDP and Labrador boards, and S-Video output. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
* mfd: twl4030: cleanup symbols and OMAP dependencyDavid Brownell2009-01-04
| | | | | | | | | | | | | Finish removing dependency of TWL driver stack on platform-specific IRQ definitions ... and remove the build dependency on OMAP. This lets the TWL4030 code be included in test builds for most platforms, and will make it easier for non-OMAP folk to update most of this code for new APIs etc. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
* mfd: twl4030: simplified child creation codeDavid Brownell2009-01-04
| | | | | | | | | | | | | | | Minor cleanup to twl4030-core: define a helper function to populate a single child node, and use it to replace six inconsistent versions of the same logic. Both object and source code shrink. As part of this, some devices now have more IRQ resources: battery charger, keypad, ADC, and USB transceiver. That helps to remove some irq #defines that block the children's drivers code from compiling on non-OMAP platforms. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
* power_supply: Add battery health reporting for WM8350Mark Brown2009-01-04
| | | | | | | | | | Implement support for reporting battery health in the WM8350 battery interface. Since we are now able to report this via the classs remove the diagnostics from the interrupt handler. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
* power_supply: Add cold to the POWER_SUPPLY_HEALTH report valuesMark Brown2009-01-04
| | | | | | | | | Some systems are able to report problems with batteries being under temperature. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
* mfd: Refactor WM8350 chip identificationMark Brown2009-01-04
| | | | | | | | | | | | | Since the WM8350 driver was originally written the semantics for the identification registers of the chip have been clarified, allowing us to do an exact match on all the fields. This avoids mistakenly running on unsupported hardware. Also change to using the datasheet names more consistently for legibility and fix a printk() that should be dev_err(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
* mfd: Switch WM8350 revision detection to a feature based modelMark Brown2009-01-04
| | | | | | | | Rather than check for chip revisions in the WM8350 drivers have the core code set flags for relevant differences. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
* power_supply: Add support for WM8350 PMUMark Brown2009-01-04
| | | | | | | | | | | | | | | | | | This patch adds support for the PMU provided by the WM8350 which implements battery, line and USB supplies including a battery charger. The hardware functions largely autonomously, with minimal software control required to initiate fast charging. Support for configuration of the USB supply is not yet implemented. This means that the hardware will remain in the mode configured at startup, by default limiting the current drawn from USB to 100mA. This driver was originally written by Liam Girdwood with subsequent updates for submission by Mark Brown. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
* mfd: allow reading entire register banks on twl4030David Brownell2009-01-04
| | | | | | | | | Minor change to the TWL4030 utility interface: support reads of all 256 bytes in each register bank (vs just 255). This can help when debugging, but is otherwise a NOP. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
* mfd: Add AUXADC support for WM8350Mark Brown2009-01-04
| | | | | | | | The auxiliary ADC in the WM8350 is shared between several subdevices so access to it needs to be arbitrated by the core driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
* mfd: Add WM8350 revision H supportMark Brown2009-01-04
| | | | | | | No other software changes are required. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
* mfd: Add some documentation for WM8350 register lockMark Brown2009-01-04
| | | | | | | | Hopefully this will make the purpose of these functions a bit clearer, it's not immediately obvious that the lock is a hardware feature. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
* mfd: Remove i.MX31ism from WM8350 i2c driverMark Brown2009-01-04
| | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
* mfd: Don't mark WM8350 security register as volatileMark Brown2009-01-04
| | | | | | | There's no need to read this back from the chip each time. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
* Merge branch 'cpus4096-for-linus-3' of ↵Linus Torvalds2009-01-03
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'cpus4096-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (77 commits) x86: setup_per_cpu_areas() cleanup cpumask: fix compile error when CONFIG_NR_CPUS is not defined cpumask: use alloc_cpumask_var_node where appropriate cpumask: convert shared_cpu_map in acpi_processor* structs to cpumask_var_t x86: use cpumask_var_t in acpi/boot.c x86: cleanup some remaining usages of NR_CPUS where s/b nr_cpu_ids sched: put back some stack hog changes that were undone in kernel/sched.c x86: enable cpus display of kernel_max and offlined cpus ia64: cpumask fix for is_affinity_mask_valid() cpumask: convert RCU implementations, fix xtensa: define __fls mn10300: define __fls m32r: define __fls h8300: define __fls frv: define __fls cris: define __fls cpumask: CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS cpumask: zero extra bits in alloc_cpumask_var_node cpumask: replace for_each_cpu_mask_nr with for_each_cpu in kernel/time/ cpumask: convert mm/ ...
| * x86: setup_per_cpu_areas() cleanupCyrill Gorcunov2009-01-03
| | | | | | | | | | | | | | | | | | | | | | | | | | Impact: cleanup __alloc_bootmem and __alloc_bootmem_node do panic for us in case of fail so no need for additional checks here. Also lets use pr_*() macros for printing. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * cpumask: fix compile error when CONFIG_NR_CPUS is not definedMike Travis2009-01-03
| | | | | | | | | | | | | | | | CONFIG_NR_CPUS will be defined for all arch's whether SMP or not, but it may not have made it into all arches yet. Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * cpumask: use alloc_cpumask_var_node where appropriateMike Travis2009-01-03
| | | | | | | | | | | | | | | | | | | | | | Impact: Reduce inter-node memory traffic. Reduces inter-node memory traffic (offloading the global system bus) by allocating referenced struct cpumasks on the same node as the referring struct. Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * cpumask: convert shared_cpu_map in acpi_processor* structs to cpumask_var_tRusty Russell2009-01-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: Reduce memory usage, use new API. This is part of an effort to reduce structure sizes for machines configured with large NR_CPUS. cpumask_t gets replaced by cpumask_var_t, which is either struct cpumask[1] (small NR_CPUS) or struct cpumask * (large NR_CPUS). (Changes to powernow-k* by <travis>.) Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * x86: use cpumask_var_t in acpi/boot.cRusty Russell2009-01-03
| | | | | | | | | | | | | | | | | | | | Impact: reduce stack size, use new API. Replace cpumask_t with cpumask_var_t. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * x86: cleanup some remaining usages of NR_CPUS where s/b nr_cpu_idsMike Travis2009-01-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: Reduce future system panics due to cpumask operations using NR_CPUS Insure that code does not look at bits >= nr_cpu_ids as when cpumasks are allocated based on nr_cpu_ids, these extra bits will not be defined. Also some other minor updates: * change in to use cpu accessor function set_cpu_present() instead of directly accessing cpu_present_map w/cpu_clear() [arch/x86/kernel/reboot.c] * use cpumask_of() instead of &cpumask_of_cpu() [arch/x86/kernel/reboot.c] * optimize some cpu_mask_to_apicid_and functions. Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * sched: put back some stack hog changes that were undone in kernel/sched.cMike Travis2009-01-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: prevents panic from stack overflow on numa-capable machines. Some of the "removal of stack hogs" changes in kernel/sched.c by using node_to_cpumask_ptr were undone by the early cpumask API updates, and causes a panic due to stack overflow. This patch undoes those changes by using cpumask_of_node() which returns a 'const struct cpumask *'. In addition, cpu_coregoup_map is replaced with cpu_coregroup_mask further reducing stack usage. (Both of these updates removed 9 FIXME's!) Also: Pick up some remaining changes from the old 'cpumask_t' functions to the new 'struct cpumask *' functions. Optimize memory traffic by allocating each percpu local_cpu_mask on the same node as the referring cpu. Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * x86: enable cpus display of kernel_max and offlined cpusMike Travis2009-01-03
| | | | | | | | | | | | | | | | | | | | | | Impact: enables /sys/devices/system/cpu/{kernel_max,offline} user interface By setting total_cpus, the drivers/base/cpu.c will display the values of kernel_max (NR_CPUS-1) and the offlined cpu map. Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * ia64: cpumask fix for is_affinity_mask_valid()Ingo Molnar2009-01-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: build fix on ia64 ia64's default_affinity_write() still had old cpumask_t usage: /home/mingo/tip/kernel/irq/proc.c: In function `default_affinity_write': /home/mingo/tip/kernel/irq/proc.c:114: error: incompatible type for argument 1 of `is_affinity_mask_valid' make[3]: *** [kernel/irq/proc.o] Error 1 make[3]: *** Waiting for unfinished jobs.... update it to cpumask_var_t. Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * cpumask: convert RCU implementations, fixIngo Molnar2009-01-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: cleanup This warning: kernel/rcuclassic.c: In function ‘rcu_start_batch’: kernel/rcuclassic.c:397: warning: passing argument 1 of ‘cpumask_andnot’ from incompatible pointer type triggers because one usage site of rcp->cpumask was not converted to to_cpumask(rcp->cpumask). There's no ill effects of this bug. Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * Merge branch 'master' of ↵Ingo Molnar2009-01-03
| |\ | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumask into cpus4096-v2
| | * xtensa: define __flsRusty Russell2009-01-03
| | | | | | | | | | | | | | | | | | Like fls, but can't be handed 0 and returns the bit number. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| | * mn10300: define __flsRusty Russell2009-01-03
| | | | | | | | | | | | | | | | | | Like fls, but can't be handed 0 and returns the bit number. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| | * m32r: define __flsRusty Russell2009-01-03
| | | | | | | | | | | | | | | | | | Like fls, but can't be handed 0 and returns the bit number. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| | * h8300: define __flsRusty Russell2009-01-03
| | | | | | | | | | | | | | | | | | Like fls, but can't be handed 0 and returns the bit number. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| | * frv: define __flsRusty Russell2009-01-03
| | | | | | | | | | | | | | | | | | Like fls, but can't be handed 0 and returns the bit number. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| | * cris: define __flsRusty Russell2009-01-03
| | | | | | | | | | | | | | | | | | Like fls, but can't be handed 0 and returns the bit number. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | Merge branch 'master' of ↵Mike Travis2009-01-03
| |\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumask into merge-rr-cpumask Conflicts: arch/x86/kernel/io_apic.c kernel/rcuclassic.c kernel/sched.c kernel/time/tick-sched.c Signed-off-by: Mike Travis <travis@sgi.com> [ mingo@elte.hu: backmerged typo fix for io_apic.c ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
| | * cpumask: CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONSRusty Russell2008-12-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: new debug CONFIG options This helps find unconverted code. It currently breaks compile horribly, but we never wanted a flag day so that's expected. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-16 12:29:04 -0500