aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
* amd64_edac: check NB MCE bank enable on the current node properlyBorislav Petkov2009-09-16
| | | | | | | | | | | The old code was using smp_call_function_many which skips the current cpu if it is in the supplied cpumask. Switch to the rdmsr_on_cpus() interface which takes care of that. In addition, add get_cpus_on_this_dct_cpumask helper which computes a cpumask of all the cores on a node and thus on a DCT. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
* amd64_edac: Rewrite unganged mode code of f10_early_channel_countWan Wei2009-09-16
| | | | | | | | | | | | Simplify the procedure by checking if there is any DIMM in each channel. This patch will fix the bugs such as when there is no DIMMs under certain node, two DIMMs in the same channel, and only one DIMM in each channel of the node. Borislav: minor fixups Signed-off-by: Wan Wei <wanwei@mail.dawning.com.cn> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
* amd64_edac: cleanup amd64_check_ecc_enabledBorislav Petkov2009-09-16
| | | | | | | | | | Simplify code flow and make sure return value is always valid since further driver init depends on it. Carve out long warning string and make code more readable. Shorten some names, while at it. There should be no functional change resulting from this patch. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
* x86, EDAC: Provide function to return NodeId of a CPUAndreas Herrmann2009-09-16
| | | | | | Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Acked-by: H. Peter Anvin <hpa@zytor.com>
* amd64_edac: build driver only on AMD hardwareIngo Molnar2009-09-16
| | | | | | | | | | | | | | | | | | | | | -tip testing found the following build failure (config attached): drivers/built-in.o: In function `amd64_check': amd64_edac.c:(.text+0x3e9491): undefined reference to `amd_decode_nb_mce' drivers/built-in.o: In function `amd64_init_2nd_stage': amd64_edac.c:(.text+0x3e9b46): undefined reference to `amd_report_gart_errors' amd64_edac.c:(.text+0x3e9b55): undefined reference to `amd_register_ecc_decoder' drivers/built-in.o: In function `amd64_nbea_store': amd64_edac_dbg.c:(.text+0x3ea22e): undefined reference to `amd_decode_nb_mce' drivers/built-in.o: In function `amd64_remove_one_instance': amd64_edac.c:(.devexit.text+0x3eea): undefined reference to `amd_report_gart_errors' amd64_edac.c:(.devexit.text+0x3ef6): undefined reference to `amd_unregister_ecc_decoder' the AMD EDAC code has a dependency on CONFIG_CPU_SUP_AMD facilities. The patch below solves the problem here. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-next-2.6Linus Torvalds2009-09-15
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-next-2.6: ide: fixup for fujitsu disk ide: convert to ->proc_fops at91_ide: remove headers specific for at91sam9263 IDE: palm_bk3710: convert clock usage after clkdev conversion ide: fix races in handling of user-space SET XFER commands ide: allow ide_dev_read_id() to be called from the IRQ context ide: ide-taskfile.c fix style problems drivers/ide/ide-cd.c: Use DIV_ROUND_CLOSEST ide-tape: fix handling of postponed rqs ide-tape: convert to ide_debug_log macro ide-tape: fix debug call ide: Fix annoying warning in ide_pio_bytes(). IDE: Save a call to PageHighMem()
| * ide: fixup for fujitsu diskWu Zhangjin2009-09-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch will fix the following problem on Yeeloong netbook with fujitsu disk. irq 14: nobody cared (try booting with the "irqpoll" option) Call Trace: [<ffffffff8020d438>] dump_stack+0x8/0x40 [<ffffffff8027ec64>] __report_bad_irq+0x58/0xe4 [<ffffffff8027ee6c>] note_interrupt+0x17c/0x23c [<ffffffff8027f9b8>] handle_level_irq+0xcc/0x134 [<ffffffff802125b0>] mach_irq_dispatch+0xb8/0x1e0 [<ffffffff8020041c>] ret_from_irq+0x0/0x4 [<ffffffff8029e678>] free_hot_cold_page+0x224/0x2a0 [<ffffffff8026f794>] swsusp_free+0xb0/0x14c [<ffffffff8026ec08>] hibernate+0x198/0x218 [<ffffffff8026cfa8>] state_store+0x90/0x138 [<ffffffff8032b5a4>] sysfs_write_file+0x130/0x194 [<ffffffff802c94fc>] vfs_write+0xb8/0x180 [<ffffffff802c96b8>] SyS_write+0x50/0x98 [<ffffffff80203fd8>] handle_sys+0x158/0x174 handlers: [<ffffffff80429670>] (ide_intr+0x0/0x300) Disabling IRQ #14 References: 1. commit 1fde02e7146d4a1bab80fd1506f9018fe71e8521 of git://dev.lemote.com/linux_loongson.git 2. 8bc1e5aa06a2a9a425c4a6795fc564cba1521487 (ide: respect quirk_drives[] list on all controllers) Signed-off-by: Yan Hua <yanh@lemote.com> Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ide: convert to ->proc_fopsAlexey Dobriyan2009-09-01
| | | | | | | | | | | | | | | | | | | | | | | | ->read_proc, ->write_proc are going away, ->proc_fops should be used instead. The only tricky place is IDENTIFY handling: if for some reason taskfile_lib_get_identify() fails, buffer _is_ changed and at least first byte is overwritten. Emulate old behaviour with returning that first byte to userspace and reporting length=1 despite overall -E. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * at91_ide: remove headers specific for at91sam9263Sergey Matyukevich2009-08-15
| | | | | | | | | | | | | | | | | | | | | | | | This driver requires only static memory controller definitions and macroses contained in generic header at91sam9_smc.h. Those extra headers are misleading since this driver also works fine for at91sam9260 SoC: tests were performed on afeb9260 board. Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
| * IDE: palm_bk3710: convert clock usage after clkdev conversionKevin Hilman2009-08-15
| | | | | | | | | | | | | | | | | | | | DaVinci core code has converted to the new clkdev API so clock name strings are not needed. Instead, just the a 'struct device' pointer is needed. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ide: fix races in handling of user-space SET XFER commandsBartlomiej Zolnierkiewicz2009-08-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Make cmd->tf_flags field 'u16' and add IDE_TFLAG_SET_XFER taskfile flag. * Update ide_finish_cmd() to set xfer / re-read id if the new flag is set. * Convert set_xfer_rate() (write handler for /proc/ide/hd?/current_speed) and ide_cmd_ioctl() (HDIO_DRIVE_CMD ioctl handler) to use the new flag. * Remove no longer needed disable_irq_nosync() + enable_irq() from ide_config_drive_speed(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ide: allow ide_dev_read_id() to be called from the IRQ contextBartlomiej Zolnierkiewicz2009-08-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Un-static __ide_wait_stat(). * Allow ide_dev_read_id() helper to be called from the IRQ context by adding irq_ctx flag and using mdelay()/__ide_wait_stat() when needed. * Switch ide_driveid_update() to set irq_ctx flag. This change is needed for the consecutive patch which fixes races in handling of user-space SET XFER commands but for improved bisectability and clarity it is better to do it in a separate patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ide: ide-taskfile.c fix style problemsJaswinder Singh Rajput2009-08-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix trivial style problems: WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h> WARNING: space prohibited between function name and open parenthesis '(' WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable ERROR: do not use C99 // comments X 2 ERROR: trailing statements should be on next line ERROR: trailing whitespace ERROR: switch and case should be at the same indent WARNING: line over 80 characters total: 5 errors, 4 warnings Also removed dead code Also used pr_err() to avoid line breaks Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * drivers/ide/ide-cd.c: Use DIV_ROUND_CLOSESTJulia Lawall2009-08-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d but is perhaps more readable. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ #include <linux/kernel.h> @depends on haskernel@ expression x,__divisor; @@ - (((x) + ((__divisor) / 2)) / (__divisor)) + DIV_ROUND_CLOSEST(x,__divisor) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ide-tape: fix handling of postponed rqsBorislav Petkov2009-08-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ide-tape used to hit [ 58.614854] ide-tape: ht0: BUG: Two DSC requests queued! due to the fact that another rq was being issued while the driver was waiting for DSC to get set for the device executing ATAPI commands which set the DSC to 1 to indicate completion. Here's a sample output of that case: issue REZERO_UNIT [ 143.088505] ide-tape: ide_tape_issue_pc: retry #0, cmd: 0x01 [ 143.095122] ide: Enter ide_pc_intr - interrupt handler [ 143.096118] ide: Packet command completed, 0 bytes transferred [ 143.106319] ide-tape: ide_tape_callback: cmd: 0x1, dsc: 1, err: 0 [ 143.112601] ide-tape: idetape_postpone_request: cmd: 0x1, dsc_poll_freq: 2000 we stall the ide-tape queue here waiting for DSC [ 143.119936] ide-tape: ide_tape_read_position: enter [ 145.119019] ide-tape: idetape_do_request: sector: 4294967295, nr_sectors: 0 and issue the new READ_POSITION rq and hit the check. [ 145.126247] ide-tape: ht0: BUG: Two DSC requests queued! [ 145.131748] ide-tape: ide_tape_read_position: BOP - No [ 145.137059] ide-tape: ide_tape_read_position: EOP - No Also, ->postponed_rq used to point to that postponed request. To make things worse, in certain circumstances the rq it was pointing to got replaced unterneath it by swiftly reusing the same rq from the mempool of the block layer practically confusing stuff even more. However, we don't need to keep a pointer to that rq but simply wait for DSC to be set first before issuing the follow-up request in the drive's queue. In order to do that, we make idetape_do_request() first check the DSC and if not set, we stall the drive queue giving the other device on that IDE channel a chance. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ide-tape: convert to ide_debug_log macroBorislav Petkov2009-08-07
| | | | | | | | | | | | | | | | | | Remove tape->debug_mask and use drive->debug_mask instead. There should be no functional change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ide-tape: fix debug callMark de Wever2009-08-07
| | | | | | | | | | | | | | This error only occurs when IDETAPE_DEBUG_LOG is enabled. Signed-off-by: Mark de Wever <koraq@xs4all.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ide: Fix annoying warning in ide_pio_bytes().David S. Miller2009-08-07
| | | | | | | | | | | | | | | | | | GCC can't see that flags is only set and used when PageHighmem() is true. Inspired by a patch from Jean Delvare. Signed-off-by: David S. Miller <davem@davemloft.net>
| * IDE: Save a call to PageHighMem()Jean Delvare2009-08-07
| | | | | | | | | | | | | | | | PageHighMem() isn't cheap so avoid calling it twice on the same page. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'next' of ↵Linus Torvalds2009-09-15
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (134 commits) powerpc/nvram: Enable use Generic NVRAM driver for different size chips powerpc/iseries: Fix oops reading from /proc/iSeries/mf/*/cmdline powerpc/ps3: Workaround for flash memory I/O error powerpc/booke: Don't set DABR on 64-bit BookE, use DAC1 instead powerpc/perf_counters: Reduce stack usage of power_check_constraints powerpc: Fix bug where perf_counters breaks oprofile powerpc/85xx: Fix SMP compile error and allow NULL for smp_ops powerpc/irq: Improve nanodoc powerpc: Fix some late PowerMac G5 with PCIe ATI graphics powerpc/fsl-booke: Use HW PTE format if CONFIG_PTE_64BIT powerpc/book3e: Add missing page sizes powerpc/pseries: Fix to handle slb resize across migration powerpc/powermac: Thermal control turns system off too eagerly powerpc/pci: Merge ppc32 and ppc64 versions of phb_scan() powerpc/405ex: support cuImage via included dtb powerpc/405ex: provide necessary fixup function to support cuImage powerpc/40x: Add support for the ESTeem 195E (PPC405EP) SBC powerpc/44x: Add Eiger AMCC (AppliedMicro) PPC460SX evaluation board support. powerpc/44x: Update Arches defconfig powerpc/44x: Update Arches dts ... Fix up conflicts in drivers/char/agp/uninorth-agp.c
| * | powerpc/nvram: Enable use Generic NVRAM driver for different size chipsMartyn Welch2009-09-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the reliance on a staticly defined NVRAM size, allowing platforms to support NVRAMs with sizes differing from the standard. A fall back value is provided for platforms not supporting this extension. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | powerpc/iseries: Fix oops reading from /proc/iSeries/mf/*/cmdlineBenjamin Herrenschmidt2009-09-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | That code uses dma_mapping_error() with a NULL device, which is a bad idea :-) The proper fix might be to start using some kind of pseudo device for all these low level mappings with the hypervisor but that will be for another day. Since it directly calls into the low level iommu code, I see no problem in having it directly test against DMA_ERROR_CODE instead of using the accessors with a NULL argument for now. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | powerpc/ps3: Workaround for flash memory I/O errorGeoff Levand2009-09-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A workaround for flash memory I/O errors when the PS3 internal hard disk has not been formatted for OtherOS use. This error condition mainly effects 'Live CD' users who have not formatted the PS3's internal hard disk for OtherOS. Fixes errors similar to these when using the ps3-flash-util or ps3-boot-game-os programs: ps3flash read failed 0x2050000 os_area_header_read: read error: os_area_header: Input/output error main:627: os_area_read_hp error. ERROR: can't change boot flag Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | powerpc/booke: Don't set DABR on 64-bit BookE, use DAC1 insteadBenjamin Herrenschmidt2009-09-10
| | | | | | | | | | | | | | | | | | | | | Also remove a duplicate setting of it in the context switch path on BookE. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | powerpc/perf_counters: Reduce stack usage of power_check_constraintsPaul Mackerras2009-09-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Michael Ellerman reported stack-frame size warnings being produced for power_check_constraints(), which uses an 8*8 array of u64 and two 8*8 arrays of unsigned long, which are currently allocated on the stack, along with some other smaller variables. These arrays come to 1.5kB on 64-bit or 1kB on 32-bit, which is a bit too much for the stack. This fixes the problem by putting these arrays in the existing per-cpu cpu_hw_counters struct. This is OK because two of the call sites have interrupts disabled already; for the third call site we use get_cpu_var, which disables preemption, so we know we won't get a context switch while we're in power_check_constraints(). Note that power_check_constraints() can be called during context switch but is not called from interrupts. Reported-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: <stable@kernel.org) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | powerpc: Fix bug where perf_counters breaks oprofilePaul Mackerras2009-09-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently there is a bug where if you use oprofile on a pSeries machine, then use perf_counters, then use oprofile again, oprofile will not work correctly; it will lose the PMU configuration the next time the hypervisor does a partition context switch, and thereafter won't count anything. Maynard Johnson identified the sequence causing the problem: - oprofile setup calls ppc_enable_pmcs(), which calls pseries_lpar_enable_pmcs, which tells the hypervisor that we want to use the PMU, and sets the "PMU in use" flag in the lppaca. This flag tells the hypervisor whether it needs to save and restore the PMU config. - The perf_counter code sets and clears the "PMU in use" flag directly as it context-switches the PMU between tasks, and leaves it clear when it finishes. - oprofile setup, called for a new oprofile run, calls ppc_enable_pmcs, which does nothing because it has already been called. In particular it doesn't set the "PMU in use" flag. This fixes the problem by arranging for ppc_enable_pmcs to always set the "PMU in use" flag. It makes the perf_counter code call ppc_enable_pmcs also rather than calling the lower-level function directly, and removes the setting of the "PMU in use" flag from pseries_lpar_enable_pmcs, since that is now done in its caller. This also removes the declaration of pasemi_enable_pmcs because it isn't defined anywhere. Reported-by: Maynard Johnson <mpjohn@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: <stable@kernel.org) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | powerpc/85xx: Fix SMP compile error and allow NULL for smp_opsKumar Gala2009-09-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following commit introduced a compile error since it removed the implementation of smp_85xx_basic_setup: commit 77c0a700c1c292edafa11c1e52821ce4636f81b0 Author: Benjamin Herrenschmidt <benh@kernel.crashing.org> Date: Fri Aug 28 14:25:04 2009 +1000 powerpc: Properly start decrementer on BookE secondary CPUs Make it so that smp_ops probe() and setup_cpu() can be set to NULL. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | powerpc/irq: Improve nanodocWolfram Sang2009-09-10
| | | | | | | | | | | | | | | | | | | | | | | | The OF helpers look like nanodoc but are missing the header. Fix this and a typo (s/nad/and/) while we are here. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | powerpc: Fix some late PowerMac G5 with PCIe ATI graphicsBenjamin Herrenschmidt2009-09-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A misconfiguration by the firmware of the U4 PCIe bridge on PowerMac G5 with the U4 bridge (latest generations, may also affect the iMac G5 "iSight") is causing us to re-assign the PCI BARs of the video card, which can get it out of sync with the firmware, thus breaking offb. This works around it by fixing up the bridge configuration properly at boot time. It also fixes a bug where the firmware provides us with an incorrect set of accessible regions in the device-tree. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | powerpc/fsl-booke: Use HW PTE format if CONFIG_PTE_64BITKumar Gala2009-09-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Switch to using the Power ISA defined PTE format when we have a 64-bit PTE. This makes the code handling between fsl-booke and book3e-64 similiar for TLB faults. Additionally this lets use take advantage of the page size encodings and full permissions that the HW PTE defines. Also defined _PMD_PRESENT, _PMD_PRESENT_MASK, and _PMD_BAD since the 32-bit ppc arch code expects them. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | powerpc/book3e: Add missing page sizesKumar Gala2009-09-02
| | | | | | | | | | | | | | | | | | | | | | | | Add defines for the other page sizes. Even if HW doesn't support them we made them use them for hugetlbfs support. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | powerpc/pseries: Fix to handle slb resize across migrationBrian King2009-09-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SLB can change sizes across a live migration, which was not being handled, resulting in possible machine crashes during migration if migrating to a machine which has a smaller max SLB size than the source machine. Fix this by first reducing the SLB size to the minimum possible value, which is 32, prior to migration. Then during the device tree update which occurs after migration, we make the call to ensure the SLB gets updated. Also add the slb_size to the lparcfg output so that the migration tools can check to make sure the kernel has this capability before allowing migration in scenarios where the SLB size will change. BenH: Fixed #include <asm/mmu-hash64.h> -> <asm/mmu.h> to avoid breaking ppc32 build Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | powerpc/powermac: Thermal control turns system off too eagerlyLyonel Vincent2009-09-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On certain PowerMacs, a module (therm_windtunnel) controls various thermal settings (it can report CPU/case temperature, change speed of internal fans, etc.) By default, the hardware thermal control has a temperature limit to protect the computer from damages (the default limit seems to be 80°C) but therm_windtunnel.c reduces it to an anormaly low value (65°C), which means that he computer will shut down randomly when hit by direct sun light or during summer (summer in France can be quite hot), actually possibly losing data instead of protecting it. The overheat limit in therm_windtunnel.c:253-254 should be set to 75°C and 70°C instead of 65°C and 60°C respectively. From: Lyonel Vincent <lyonel@ezix.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | powerpc/pci: Merge ppc32 and ppc64 versions of phb_scan()Grant Likely2009-09-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The two versions are doing almost exactly the same thing. No need to maintain them as separate files. This patch also has the side effect of making the PCI device tree scanning code available to 32 bit powerpc machines, but no board ports actually make use of this feature at this point. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | powerpc/405ex: support cuImage via included dtbTiejun Chen2009-08-31
| | | | | | | | | | | | | | | | | | | | | | | | To support cuImage, we need to initialize the required sections and ensure that it is built. Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
| * | powerpc/405ex: provide necessary fixup function to support cuImageTiejun Chen2009-08-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For cuImage format it's necessary to provide clock fixups since u-boot will not pass necessary clock frequency into the dtb included into cuImage so we implement the clock fixups as defined in the technical documentation for the board and update header file with the basic register definitions. Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
| * | powerpc/40x: Add support for the ESTeem 195E (PPC405EP) SBCSolomon Peachy2009-08-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the ESTeem 195E Hotfoot SBC. There are several variants of the SBC deployed, single/dual ethernet+serial, and also 4MB/8MB flash variations. In the interest of having a single kernel image boot on all boards, the cuboot shim detects the differences and mangles the DTS tree appropriately. With the exception of the CF interface that was never populated on production boards, this code/DTS supports all boardpop options. Signed-off-by: Solomon Peachy <solomon@linux-wlan.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
| * | powerpc/44x: Add Eiger AMCC (AppliedMicro) PPC460SX evaluation board support.fkan@amcc.com2009-08-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the AMCC (AppliedMicro) PPC460SX Eiger evaluation board. Signed-off-by: Tai Tri Nguyen <ttnguyen@amcc.com> Acked-by: Feng Kan <fkan@amcc.com> Acked-by: Tirumala Marri <tmarri@amcc.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
| * | powerpc/44x: Update Arches defconfigStefan Roese2009-08-31
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds NOR MTD support and I2C HWMON support for the AD7414 to the AMCC Arches defconfig. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
| * | powerpc/44x: Update Arches dtsStefan Roese2009-08-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds some nodes to the AMCC Arches dts: - L2 cache support - NOR FLASH mapping with default partitioning - I2C HWMON device (AD7414) Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
| * | powerpc: Properly start decrementer on BookE secondary CPUsBenjamin Herrenschmidt2009-08-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This moves the code to start the decrementer on 40x and BookE into a separate function which is now called from time_init() and secondary_time_init(), before the respective clock sources are registered. We also remove the 85xx specific code for doing it from the platform code. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | powerpc: derive COMMAND_LINE_SIZE from asm-genericPaul Gortmaker2009-08-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | The default COMMAND_LINE_SIZE in asm-generic is 512, so the net effect of this change is nil, aside from the cleanup factor. See also commit 2b74b8569. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | powerpc/pci: Pull ppc32 PCI features into commonKumar Gala2009-08-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some of the PCI features we have in ppc32 we will need on ppc64 platforms in the future. These include support for: * ppc_md.pci_exclude_device * indirect config cycles * early config cycles We also simplified the logic in fake_pci_bus() to assume it will always get a valid pci_controller. Since all current callers seem to pass it one. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | powerpc/pci: move pci_64.c device tree scanning code into pci-common.cGrant Likely2009-08-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PCI device tree scanning code in pci_64.c is some useful functionality. It allows PCI devices to be described in the device tree instead of being probed for, which in turn allows pci devices to use all of the device tree facilities to describe complex PCI bus architectures like GPIO and IRQ routing (perhaps not a common situation for desktop or server systems, but useful for embedded systems with on-board PCI devices). This patch moves the device tree scanning into pci-common.c so it is available for 32-bit powerpc machines too. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | powerpc/pci: Remove dead checks for CONFIG_PPC_OFGrant Likely2009-08-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PPC_OF is always selected for arch/powerpc. This patch removes the stale #defines Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | powerpc/book3e-64: Add support to initial_tlb_book3e for non-HES TLBKumar Gala2009-08-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We now search through TLBnCFG looking for the first array that has IPROT support (we assume that there is only one). If that TLB has hardware entry select (HES) support we use the existing code and with the proper TLB select (the HES code still needs to clean up bolted entries from firmware). The non-HES code is pretty similiar to the 32-bit FSL Book-E code but does make some new assumtions (like that we have tlbilx) and simplifies things down a bit. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | powerpc/book3e-64: Add helper function to setup IVORsKumar Gala2009-08-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Not all 64-bit Book-3E parts will have fixed IVORs so add a function that cpusetup code can call to setup the base IVORs (0..15) to match the fixed offsets. We need to 'or' part of interrupt_base_book3e into the IVORs since on parts that have them the IVPR doesn't extend as far down. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | powerpc/book3e-64: Wait til generic_calibrate_decr to enable decrementerKumar Gala2009-08-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Match what we do on 32-bit Book-E processors and enable the decrementer in generic_calibrate_decr. We need to make sure we disable the decrementer early in boot since we currently use lazy (soft) interrupt on 64-bit Book-E and possible get a decrementer exception before we are ready for it. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | powerpc/book3e-64: Move the default cpu table entryKumar Gala2009-08-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | Move the default cpu entry table for CONFIG_PPC_BOOK3E_64 to the very end since we will probably want to support both 32-bit and 64-bit kernels for some processors that are higher up in the list. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | powerpc/mm: Add MMU features for TLB reservation & Paired MAS registersKumar Gala2009-08-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support for TLB reservation (or TLB Write Conditional) and Paired MAS registers are optional for a processor implementation so we handle them via MMU feature sections. We currently only used paired MAS registers to access the full RPN + perm bits that are kept in MAS7||MAS3. We assume that if an implementation has hardware page table at this time it also implements in TLB reservations. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-11 23:13:25 -0500