aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
* [PATCH] Fix misrouted interrupts deadlocksPavel Emelianov2006-11-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While testing kernel on machine with "irqpoll" option I've caught such a lockup: __do_IRQ() spin_lock(&desc->lock); desc->chip->ack(); /* IRQ is ACKed */ note_interrupt() misrouted_irq() handle_IRQ_event() if (...) local_irq_enable_in_hardirq(); /* interrupts are enabled from now */ ... __do_IRQ() /* same IRQ we've started from */ spin_lock(&desc->lock); /* LOCKUP */ Looking at misrouted_irq() code I've found that a potential deadlock like this can also take place: 1CPU: __do_IRQ() spin_lock(&desc->lock); /* irq = A */ misrouted_irq() for (i = 1; i < NR_IRQS; i++) { spin_lock(&desc->lock); /* irq = B */ if (desc->status & IRQ_INPROGRESS) { 2CPU: __do_IRQ() spin_lock(&desc->lock); /* irq = B */ misrouted_irq() for (i = 1; i < NR_IRQS; i++) { spin_lock(&desc->lock); /* irq = A */ if (desc->status & IRQ_INPROGRESS) { As the second lock on both CPUs is taken before checking that this irq is being handled in another processor this may cause a deadlock. This issue is only theoretical. I propose the attached patch to fix booth problems: when trying to handle misrouted IRQ active desc->lock may be unlocked. Acked-by: Ingo Molnar <mingo@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fix Data Acess error in dup_fdSharyathi Nagesh2006-11-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On running the Stress Test on machine for more than 72 hours following error message was observed. 0:mon> e cpu 0x0: Vector: 300 (Data Access) at [c00000007ce2f7f0] pc: c000000000060d90: .dup_fd+0x240/0x39c lr: c000000000060d6c: .dup_fd+0x21c/0x39c sp: c00000007ce2fa70 msr: 800000000000b032 dar: ffffffff00000028 dsisr: 40000000 current = 0xc000000074950980 paca = 0xc000000000454500 pid = 27330, comm = bash 0:mon> t [c00000007ce2fa70] c000000000060d28 .dup_fd+0x1d8/0x39c (unreliable) [c00000007ce2fb30] c000000000060f48 .copy_files+0x5c/0x88 [c00000007ce2fbd0] c000000000061f5c .copy_process+0x574/0x1520 [c00000007ce2fcd0] c000000000062f88 .do_fork+0x80/0x1c4 [c00000007ce2fdc0] c000000000011790 .sys_clone+0x5c/0x74 [c00000007ce2fe30] c000000000008950 .ppc_clone+0x8/0xc The problem is because of race window. When if(expand) block is executed in dup_fd unlocking of oldf->file_lock give a window for fdtable in oldf to be modified. So actual open_files in oldf may not match with open_files variable. Cc: Vadim Lobanov <vlobanov@speakeasy.net> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] .gitignore: add miscellaneous filesFranck Bui-Huu2006-11-13
| | | | | | | | | | | | | | | | | Prevent git from reporting this useless status: On branch refs/heads/master Untracked files: (use "git add" to add to commit) TAGS scripts/kconfig/lkc_defs.h scripts/kconfig/qconf.moc nothing to commit Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Fix missing parens in set_personality()Russell King2006-11-13
| | | | | | | | | | | | | | | | | | | If you call set_personality() with an expression such as: set_personality(foo ? PERS_FOO1 : PERS_FOO2); then this evaluates to: ((current->personality == foo ? PERS_FOO1 : PERS_FOO2) ? ... which is obviously not the intended result. Add the missing parents to ensure this gets evaluated as expected: ((current->personality == (foo ? PERS_FOO1 : PERS_FOO2)) ? ... Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Patch for nvidia divide by zero error for 7600 pci-express cardWink Saville2006-11-13
| | | | | | | | | | | | | | The following patch resolves the divide by zero error I encountered on my system: http://marc.10east.com/?l=linux-fbdev-devel&m=116058257024413&w=2 I accomplished this by merging what I thought was appropriate from: http://webcvs.freedesktop.org/xorg/driver/xf86-video-nv/src/ Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] IPMI: Fix more && typosCorey Minyard2006-11-13
| | | | | | | | | Fix improper use of "&&" when "&" was intended. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] mspec driver build fixJes Sorensen2006-11-13
| | | | | | | | | | | | | | | Fix MSPEC driver to build for non SN2 enabled configs as the driver should work in cached and uncached modes (no fetchop) on these systems. In addition make MSPEC select IA64_UNCACHED_ALLOCATOR, which is required for it and move it to arch/ia64/Kconfig to avoid warnings on non ia64 architectures running allmodconfig. Once the Kconfig code is fixed, we can move it back. Signed-off-by: Jes Sorensen <jes@sgi.com> Cc: Fernando Luis Vzquez Cao <fernando@oss.ntt.co.jp> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] pci: don't try to remove sysfs files before they are setup.David Miller2006-11-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PCI sysfs attributes are created after the initial PCI bus scan. With the addition of more return value checking and assertions in the device and sysfs layers we now can get dumps like this on sparc64: [ 20.135032] Call Trace: [ 20.135042] [0000000000537f88] pci_remove_bus_device+0x30/0xc0 [ 20.135076] [000000000078f890] pci_fill_in_pbm_cookies+0x98/0x440 [ 20.135109] [000000000042e828] sabre_scan_bus+0x230/0x400 [ 20.135139] [000000000078c710] pcibios_init+0x58/0xa0 [ 20.135159] [0000000000416f14] init+0x9c/0x2e0 [ 20.135190] [0000000000417a50] kernel_thread+0x38/0x60 [ 20.135211] [0000000000417170] rest_init+0x18/0x40 [ 20.135514] PCI0(PBMB): Bus running at 33MHz It's triggering because removal of the "config" PCI sysfs file for the device fails. On sparc64, after probing the device, we'll delete the PCI device via pci_remove_bus_device() if we cannot find the firmware device tree node corresponding to it. This is fine, but at this point the sysfs files for the PCI device won't be setup yet. So we should not try to do anything in pci_remove_sysfs_dev_files() if pci_sysfs_init() has not run yet. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] vmalloc: optimization, cleanup, bugfixesEric Dumazet2006-11-13
| | | | | | | | | | | | | | | | | - reorder 'struct vm_struct' to speedup lookups on CPUS with small cache lines. The fields 'next,addr,size' should be now in the same cache line, to speedup lookups. - One minor cleanup in __get_vm_area_node() - Bugfixes in vmalloc_user() and vmalloc_32_user() NULL returns from __vmalloc() and __find_vm_area() were not tested. [akpm@osdl.org: remove redundant BUG_ONs] Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] nfsd: fix spurious error return from nfsd_create in async caseJ. Bruce Fields2006-11-08
| | | | | | | | | | | | | | | Commit 6264d69d7df654ca64f625e9409189a0e50734e9 modified the nfsd_create() error handling in such a way that nfsd_create will usually return nfserr_perm even when succesful, if the export has the async export option. This introduced a regression that could cause mkdir() to always return a permissions error, even though the directory in question was actually succesfully created. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Acked-by: NeilBrown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] IB/ipath - program intconfig register using new HT irq hookBryan O'Sullivan2006-11-08
| | | | | | | | | | | | Eric's changes to the htirq infrastructure require corresponding modifications to the ipath HT driver code so that interrupts are still delivered properly. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Roland Dreier <rdreier@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] htirq: allow buggy drivers of buggy hardware to write the registersEric W. Biederman2006-11-08
| | | | | | | | | | | | | | | | | | | This patch adds a variant of ht_create_irq __ht_create_irq that takes an aditional parameter update that is a function that is called whenever we want to write to a drivers htirq configuration registers. This is needed to support the ipath_iba6110 because it's registers in the proper location are not actually conected to the hardware that controlls interrupt delivery. [bos@serpentine.com: fixes] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Andi Kleen <ak@suse.de> Cc: <olson@pathscale.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] htirq: refactor so we only have one function that writes to the chipEric W. Biederman2006-11-08
| | | | | | | | | | | | | | | | | | | | | This refactoring actually optimizes the code a little by caching the value that we think the device is programmed with instead of reading it back from the hardware. Which simplifies the code a little and should speed things up a bit. This patch introduces the concept of a ht_irq_msg and modifies the architecture read/write routines to update this code. There is a minor consistency fix here as well as x86_64 forgot to initialize the htirq as masked. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Andi Kleen <ak@suse.de> Acked-by: Bryan O'Sullivan <bos@pathscale.com> Cc: <olson@pathscale.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ipmi_si_intf.c: fix "&& 0xff" typosAlexey Dobriyan2006-11-08
| | | | | | | Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] IPMI: retry messages on certain error returnsCorey Minyard2006-11-08
| | | | | | | | | | Some more errors from the IPMI send message command are retryable, but are not being retried by the IPMI code. Make sure they get retried. Signed-off-by: Corey Minyard <minyard@acm.org> Cc: Frederic Lelievre <Frederic.Lelievre@ca.kontron.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] IPMI: Clean up the waiting message queue properly on unloadCorey Minyard2006-11-08
| | | | | | | | | | | | A wrong function was being used to free a list; this fixes the problem. Otherwise, an oops at unload time was possible. But not likely, since you can't have any users when you unload the modules and it is very hard to get messages into this queue without users. Signed-off-by: Corey Minyard <minyard@acm.org> Cc: Patrick Schoeller <Patrick.Schoeller@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sysctl: Undeprecate sys_sysctlEric W. Biederman2006-11-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The basic issue is that despite have been deprecated and warned about as a very bad thing in the man pages since its inception there are a few real users of sys_sysctl. It was my assumption that because sysctl had been deprecated for all of 2.6 there would be no user space users by this point, so I initially gave sys_sysctl a very short deprecation period. Now that I know there are a few real users the only sane way to proceed with deprecation is to push the time limit out to a year or two work and work with distributions that have big testing pools like fedora core to find these last remaining users. Which means that the sys_sysctl interface needs to be maintained in the meantime. Since I have provided a technical measure that allows us to add new sysctl entries without reserving more binary numbers I believe that is enough to fix the sys_sysctl binary interface maintenance problems, because there is no longer a need to change the binary interface at all. Since the sys_sysctl implementation needs to stay around for a while and the worst of the maintenance issues that caused us to occasionally break the ABI have been addressed I don't see any advantage in continuing with the removal of sys_sysctl. So instead of merely increasing the deprecation period this patch removes the deprecation of sys_sysctl and modifies the kernel to compile the code in by default. With committing to maintain sys_sysctl we get all of the advantages of a fast interface for anything that needs it. Currently sys_sysctl is about 5x faster than /proc/sys, for the same string data. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ia64: select ACPI_NUMA if ACPIKAMEZAWA Hiroyuki2006-11-08
| | | | | | | | | | | | | | | | | | | | | When ACPI && NUMA, pxm_to_node is used and it exists in drivers/acpi/numa.c Tony said: The patch makes sense ... if you pick both of "ACPI" and "NUMA", then you need (and should automatically be given) ACPI_NUMA too. The only open question is whether there is a better way of getting there. Perhaps with less configuration options in the first place? We are heading towards a future where so many systems will be NUMA that there would seem to be little benefit in keeping ACPI_NUMA separate from ACPI ... but perhaps we aren't quite there yet. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujtisu.com> Cc: Len Brown <lenb@kernel.org> Acked-by: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] kretprobe: fix kretprobe-booster to save regs and set statusMasami Hiramatsu2006-11-08
| | | | | | | | | | | | | | | | There are two bugs in the kretprobe-booster. 1) It doesn't make room for gs registers. 2) It doesn't change status of the current kprobe. This status will effect the fault handling. This patch fixes these bugs and, additionally, saves skipped registers for compatibility with the original kretprobe. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: do not freeze md threads for suspendRafael J. Wysocki2006-11-08
| | | | | | | | | | | | | | | | If there's a swap file on a software RAID, it should be possible to use this file for saving the swsusp's suspend image. Also, this file should be available to the memory management subsystem when memory is being freed before the suspend image is created. For the above reasons it seems that md_threads should not be frozen during the suspend and the appended patch makes this happen, but then there is the question if they don't cause any data to be written to disks after the suspend image has been created, provided that all filesystems are frozen at that time. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: fix sizing problem with raid5-reshape and CONFIG_LBD=nNeilBrown2006-11-08
| | | | | | | | | I forgot to has the size-in-blocks to (loff_t) before shifting up to a size-in-bytes. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: change ONLINE/OFFLINE events to a single CHANGE eventNeilBrown2006-11-08
| | | | | | | | | | | | | | It turns out that CHANGE is preferred to ONLINE/OFFLINE for various reasons (not least of which being that udev understands it already). So remove the recently added KOBJ_OFFLINE (no-one is likely to care anyway) and change the ONLINE to a CHANGE event Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Neil Brown <neilb@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Tigran has movedTigran Aivazian2006-11-08
| | | | | Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] drivers/telephony/ixj: fix an array overrunAdrian Bunk2006-11-08
| | | | | | | | | | The Coverity checker noted that in drivers/telephony/ixj.c:ixj_build_filter_cadence(), filter_en[4] or filter_en[5] could be written to. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dm: raid1: fix waiting for io on suspendJonathan E Brassow2006-11-08
| | | | | | | | | | | | | | All device-mapper targets must complete outstanding I/O before suspending. The mirror target generates I/O in its recovery phase and fails to wait for it. It needs to be tracked so we can ensure that it has completed before we suspend. [akpm@osdl.org: cleanup] Signed-off-by: Jonathan E Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: <dm-devel@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dm: multipath: fix rr_add_path orderJonathan E Brassow2006-11-08
| | | | | | | | | | | | | When adding paths to the round-robin path selector, their order gets inverted, which is not desirable. Fix by replacing list_add() with list_add_tail(). Signed-off-by: Jonathan E Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: <dm-devel@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dm: suspend: fix error pathAlasdair G Kergon2006-11-08
| | | | | | | | | | | | | If the device is already suspended, just return the error and skip the code that would incorrectly wipe md->suspended_bdev. (This isn't currently a problem because existing code avoids calling this function if the device is already suspended.) Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: <dm-devel@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dm: fix find_device raceAlasdair G Kergon2006-11-08
| | | | | | | | | | | | | | | | | | | | There is a race between dev_create() and find_device(). If the mdptr has not yet been stored against a device, find_device() needs to behave as though no device was found. It already returns NULL, but there is a dm_put() missing: it must drop the reference dm_get_md() took. The bug was introduced by dm-fix-mapped-device-ref-counting.patch. It manifests itself if another dm ioctl attempts to reference a newly-created device while the device creation ioctl is still running. The consequence is that the device cannot be removed until the machine is rebooted. Certain udev configurations can lead to this happening. Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: <dm-devel@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] i386: Force data segment to be 4K alignedVivek Goyal2006-11-08
| | | | | | | | | | | | | o Currently there is no specific alignment restriction in linker script and in some cases it can be placed non 4K aligned addresses. This fails kexec which checks that segment to be loaded is page aligned. o I guess, it does not harm data segment to be 4K aligned. Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] nfsd4: fix open-create permissionsJ. Bruce Fields2006-11-08
| | | | | | | | | | | | | | | In the case where an open creates the file, we shouldn't be rechecking permissions to open the file; the open succeeds regardless of what the new file's mode bits say. This patch fixes the problem, but only by introducing yet another parameter to nfsd_create_v3. This is ugly. This will be fixed by later patches. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Acked-by: Neil Brown <neilb@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] nfsd4: reindent do_open_lookup()J. Bruce Fields2006-11-08
| | | | | | | | | | Minor rearrangement, cleanup of do_open_lookup(). No change in behavior. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Acked-by: Neil Brown <neilb@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] A minor fix for set_mb() in Documentation/memory-barriers.txtOleg Nesterov2006-11-08
| | | | | | | | | | | set_mb() is used by set_current_state() which needs mb(), not wmb(). I think it would be right to assume that set_mb() implies mb(), all arches seem to do just this. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Regression in 2.6.19-rc microcode driverArjan van de Ven2006-11-08
| | | | | | | | | | | | | | | | | | | | If the microcode driver is built in (rather than module) there are some, ehm, interesting effects happening due to the new "call out to userspace" behavior that is introduced.. and which runs too early. The result is a boot hang; which is really nasty. The patch below is a minimally safe patch to fix this regression for 2.6.19 by just not requesting actual microcode updates during early boot. (That is a good idea in general anyway) The "real" fix is a lot more complex given the entire cpu hotplug scenario (during cpu hotplug you normally need to load the microcode as well); but the interactions for that are just really messy at this point; this fix at least makes it work and avoids a full detangle of hotplug. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge merom:v2.6/linuxLinus Torvalds2006-11-08
|\ | | | | | | | | | | * merom:v2.6/linux: x86-64: write IO APIC irq routing entries in correct order x86-64: clean up io-apic accesses
| * x86-64: write IO APIC irq routing entries in correct orderLinus Torvalds2006-11-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the x86-64 version of f9dadfa71bc594df09044da61d1c72701121d802 that did the same thing on i386. Since the "mask" bit is in the low word, when we write a new entry, we need to write the high word first, before we potentially unmask it. The exception is when we actually want to mask the interrupt, in which case we want to write the low word first to make sure that the high word doesn't change while the interrupt routing is still active. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
| * x86-64: clean up io-apic accessesLinus Torvalds2006-11-08
| | | | | | | | | | | | | | | | | | | | | | | | This is just commit 130fe05dbc0114609cfef9815c0c5580b42decfa ported to x86-64, for all the same reasons. It cleans up the IO-APIC accesses in order to then fix the ordering issues. We move the accessor functions (that were only used by io_apic.c) out of a header file, and use proper memory-mapped accesses rather than making up our own "volatile" pointers. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | Revert "[PATCH] i386: Add MMCFG resources to i386 too"Linus Torvalds2006-11-08
|/ | | | | | | | | | | | This reverts commit de09bddb9d6f96785be470c832b881e6d72d589f. It tried to reserve the MMCONFIG mmio memory ranges, but since the MMCONFIG information is broken and often bogus (which is why we don't dare use it most of the time _anyway_), it does more harm than good. Cc: Jeff Chua <jeff.chua.linux@gmail.com> Cc: Adrian Bunk <bunk@stusta.de> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge branch 'upstream-linus' of ↵Linus Torvalds2006-11-08
|\ | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] sata_via: fix obvious typo
| * [libata] sata_via: fix obvious typoJeff Garzik2006-11-08
| | | | | | | | | | | | Spotted by Martin Devera. Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2006-11-08
|\ \ | |/ |/| | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [DECNET]: Endianess fixes (try #2) [TG3]: Fix array overrun in tg3_read_partno(). [NET]: Set truesize in pskb_copy [NETPOLL]: Compute checksum properly in netpoll_send_udp(). [PKT_SCHED] sch_htb: Use hlist_del_init(). [TCP]: Don't use highmem in tcp hash size calculation. [NET]: kconfig, correct traffic shaper
| * [DECNET]: Endianess fixes (try #2)Steven Whitehouse2006-11-07
| | | | | | | | | | | | | | Here are some fixes to endianess problems spotted by Al Viro. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [TG3]: Fix array overrun in tg3_read_partno().Michael Chan2006-11-07
| | | | | | | | | | | | | | | | | | | | Use proper upper limits for the loops and check for all error conditions. The problem was noticed by Adrian Bunk. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [NET]: Set truesize in pskb_copyHerbert Xu2006-11-07
| | | | | | | | | | | | | | | | Since pskb_copy tacks on the non-linear bits from the original skb, it needs to count them in the truesize field of the new skb. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [NETPOLL]: Compute checksum properly in netpoll_send_udp().Chris Lalancette2006-11-07
| | | | | | | | | | Signed-off-by: Chris Lalancette <clalance@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [PKT_SCHED] sch_htb: Use hlist_del_init().Stephen Hemminger2006-11-07
| | | | | | | | | | | | | | | | Otherwise we can hit paths that (legally) do multiple deletes on the same node and OOPS with the HLIST poison values there instead of NULL. Signed-off-by: David S. Miller <davem@davemloft.net>
| * [TCP]: Don't use highmem in tcp hash size calculation.John Heffner2006-11-07
| | | | | | | | | | | | | | | | | | This patch removes consideration of high memory when determining TCP hash table sizes. Taking into account high memory results in tcp_mem values that are too large. Signed-off-by: John Heffner <jheffner@psc.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [NET]: kconfig, correct traffic shaperJiri Slaby2006-11-07
| | | | | | | | | | | | | | | | | | | | | | | | As Patrick McHardy <kaber@trash.net> suggested, Traffic Shaper is now obsolete and alternative to it is no longer CBQ, since its problems with virtual devices, alter Kconfig text to reflect this -- put a link to the traffic schedulers as a whole. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Linux 2.6.19-rc5v2.6.19-rc5Linus Torvalds2006-11-07
| | | | | | | | Ok, things are clearly starting to calm down.. Finally.
* | Merge branch 'fixes_for_linus' of ↵Linus Torvalds2006-11-07
|\ \ | |/ |/| | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbglaw/vax-linux * 'fixes_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbglaw/vax-linux: Update for the srm_env driver.
| * Update for the srm_env driver.Jan-Benedict Glaw2006-11-07
| | | | | | | | | | | | | | This patch contains a fix for a bug introduced more than a year ago (not setting *eof) and updates whitespace a bit. Signed-off-by: Jan-Benedict Glaw <jbglaw@lug-owl.de>
generated by cgit v1.2.2 (git 2.25.0) at 2024-09-29 12:37:09 -0400