aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
* bus: mvebu-mbus: Restore checking for coherency fabric hardwareNeil Greatorex2013-03-30
| | | | | | | | | | The new mvebu-mbus driver was not checking the device tree for coherency fabric hardware and hence was not setting the hw_io_coherency flag in mbus_state. This prevented the mvsdio driver from operating correctly. This patch restores the check. Signed-off-by: Neil Greatorex <neil@fatboyfat.co.uk> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* bus: introduce an Marvell EBU MBus driverThomas Petazzoni2013-03-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Marvell EBU SoCs have a configurable physical address space layout: the physical ranges of memory used to address PCI(e) interfaces, NOR flashes, SRAM and various other types of memory are configurable by software, through a mechanism of so-called 'address decoding windows'. This new driver mvebu-mbus consolidates the existing code to address the configuration of these memory ranges, which is spread into mach-mvebu, mach-orion5x, mach-mv78xx0, mach-dove and mach-kirkwood. Following patches convert each Marvell EBU SoC family to use this driver, therefore removing the old code that was configuring the address decoding windows. It is worth mentioning that the MVEBU_MBUS Kconfig option is intentionally added as a blind option. The new driver implements and exports the mv_mbus_dram_info() function, which is used by various Marvell drivers throughout the tree to get access to window configuration parameters that they require. This function is also implemented in arch/arm/plat-orion/addr-map.c, which ultimately gets removed at the end of this patch series. So, in order to preserve bisectability, we want to ensure that *either* this new driver, *or* the legacy code in plat-orion/addr-map.c gets compiled in. By making MVEBU_MBUS a blind option, we are sure that only a platform that does 'select MVEBU_MBUS' will get this new driver compiled in. Therefore, throughout the next patches that convert the Marvell sub-architectures one after the other to this new driver, we add the 'select MVEBU_MBUS' and also ensure to remove plat-orion/addr-map.c from the build for this specific sub-architecture. This ensures that bisectability is preserved. Ealier versions of this driver had a DT binding, but since those were not yet agreed upon, they were removed. The driver still uses of_device_id to find the SoC specific details according to the string passed to mvebu_mbus_init(). The plan is to re-introduce a proper DT binding as a followup set of patches. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* Linux 3.9-rc4Linus Torvalds2013-03-23
|
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds2013-03-23
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull SCSI target fixes from Nicholas Bellinger: "These are mostly minor fixes this time around. The iscsi-target CHAP big-endian bugfix and bump FD_MAX_SECTORS=2048 default patch to allow 1MB sized I/Os for FILEIO backends on >= v3.5 code are both CC'ed to stable. Also, there is a persistent reservations regression that has recently been reported for >= v3.8.x code, that is currently being tracked down for v3.9." * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target/pscsi: Reject cross page boundary case in pscsi_map_sg target/file: Bump FD_MAX_SECTORS to 2048 to handle 1M sized I/Os tcm_vhost: Flush vhost_work in vhost_scsi_flush() tcm_vhost: Add missed lock in vhost_scsi_clear_endpoint() target: fix possible memory leak in core_tpg_register() target/iscsi: Fix mutual CHAP auth on big-endian arches target_core_sbc: use noop for SYNCHRONIZE_CACHE
| * target/pscsi: Reject cross page boundary case in pscsi_map_sgAsias He2013-03-19
| | | | | | | | | | | | | | | | | | | | | | We can only have one page of data in each sg element, so we can not cross a page boundary. Fail this case. The 'while (len > 0 && data_len > 0) {}' loop is not necessary. The loop can only be executed once. Signed-off-by: Asias He <asias@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * target/file: Bump FD_MAX_SECTORS to 2048 to handle 1M sized I/OsNicholas Bellinger2013-03-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch bumps the default FILEIO backend FD_MAX_SECTORS value from 1024 -> 2048 in order to allow block_size=512 to handle 1M sized I/Os. The current default rejects I/Os larger than 512K in sbc_parse_cdb(): [12015.915146] SCSI OP 2ah with too big sectors 1347 exceeds backend hw_max_sectors: 1024 [12015.977744] SCSI OP 2ah with too big sectors 2048 exceeds backend hw_max_sectors: 1024 This issue is present in >= v3.5 based kernels, introduced after the removal of se_task logic. Reported-by: Viljami Ilola <azmulx@netikka.fi> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * tcm_vhost: Flush vhost_work in vhost_scsi_flush()Asias He2013-03-18
| | | | | | | | | | | | | | | | | | | | | | We also need to flush the vhost_works. It is the completion vhost_work currently. Signed-off-by: Asias He <asias@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * tcm_vhost: Add missed lock in vhost_scsi_clear_endpoint()Asias He2013-03-18
| | | | | | | | | | | | | | | | | | | | tv_tpg->tv_tpg_vhost_count should be protected by tv_tpg->tv_tpg_mutex. Signed-off-by: Asias He <asias@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * target: fix possible memory leak in core_tpg_register()Wei Yongjun2013-03-18
| | | | | | | | | | | | | | | | | | | | | | 'se_tpg->tpg_lun_list' is malloced in core_tpg_register() and should be freed before leaving from the error handling cases, otherwise it will cause memory leak. 'se_tpg' is malloced out of this function, and will be freed if we return error, so remove free for 'se_tpg'. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * target/iscsi: Fix mutual CHAP auth on big-endian archesAndy Grover2013-03-18
| | | | | | | | | | | | | | | | | | | | See https://bugzilla.redhat.com/show_bug.cgi?id=916290 Used a temp var since we take its address in sg_init_one. Signed-off-by: Andy Grover <agrover@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * target_core_sbc: use noop for SYNCHRONIZE_CACHEHannes Reinecke2013-03-18
| | | | | | | | | | | | | | | | | | Windows does not expect SYNCHRONIZE_CACHE to be not supported, and will generate a BSOD upon shutdown when using rd_mcp backend. So better use a noop here. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
* | Merge tag 'md-3.9-fixes' of git://neil.brown.name/mdLinus Torvalds2013-03-23
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull md fixes from NeilBrown: "A few bugfixes for md - recent regressions in raid5 - recent regressions in dmraid - a few instances of CONFIG_MULTICORE_RAID456 linger Several tagged for -stable" * tag 'md-3.9-fixes' of git://neil.brown.name/md: md: remove CONFIG_MULTICORE_RAID456 entirely md/raid5: ensure sync and DISCARD don't happen at the same time. MD: Prevent sysfs operations on uninitialized kobjects MD RAID5: Avoid accessing gendisk or queue structs when not available md/raid5: schedule_construction should abort if nothing to do.
| * | md: remove CONFIG_MULTICORE_RAID456 entirelyPaul Bolle2013-03-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Once instance of this Kconfig macro remained after commit 51acbcec6c42b24482bac18e42befc822524535d ("md: remove CONFIG_MULTICORE_RAID456"). Remove that one too. And, while we're at it, also remove it from the defconfig files that carry it. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: NeilBrown <neilb@suse.de>
| * | md/raid5: ensure sync and DISCARD don't happen at the same time.NeilBrown2013-03-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A number of problems can occur due to races between resync/recovery and discard. - if sync_request calls handle_stripe() while a discard is happening on the stripe, it might call handle_stripe_clean_event before all of the individual discard requests have completed (so some devices are still locked, but not all). Since commit ca64cae96037de16e4af92678814f5d4bf0c1c65 md/raid5: Make sure we clear R5_Discard when discard is finished. this will cause R5_Discard to be cleared for the parity device, so handle_stripe_clean_event() will not be called when the other devices do become unlocked, so their ->written will not be cleared. This ultimately leads to a WARN_ON in init_stripe and a lock-up. - If handle_stripe_clean_event() does clear R5_UPTODATE at an awkward time for resync, it can lead to s->uptodate being less than disks in handle_parity_checks5(), which triggers a BUG (because it is one). So: - keep R5_Discard on the parity device until all other devices have completed their discard request - make sure we don't try to have a 'discard' and a 'sync' action at the same time. This involves a new stripe flag to we know when a 'discard' is happening, and the use of R5_Overlap on the parity disk so when a discard is wanted while a sync is active, so we know to wake up the discard at the appropriate time. Discard support for RAID5 was added in 3.7, so this is suitable for any -stable kernel since 3.7. Cc: stable@vger.kernel.org (v3.7+) Reported-by: Jes Sorensen <Jes.Sorensen@redhat.com> Tested-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
| * | MD: Prevent sysfs operations on uninitialized kobjectsJonathan Brassow2013-03-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MD: Prevent sysfs operations on uninitialized kobjects Device-mapper does not use sysfs; but when device-mapper is leveraging MD's RAID personalities, MD sometimes attempts to update sysfs. This patch adds checks for 'mddev-kobj.sd' in sysfs_[un]link_rdev to ensure it is about to operate on something valid. This patch also checks for 'mddev->kobj.sd' before calling 'sysfs_notify' in 'remove_and_add_spares'. Although 'sysfs_notify' already makes this check, doing so in 'remove_and_add_spares' prevents an additional mutex operation. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
| * | MD RAID5: Avoid accessing gendisk or queue structs when not availableJonathan Brassow2013-03-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MD RAID5: Fix kernel oops when RAID4/5/6 is used via device-mapper Commit a9add5d (v3.8-rc1) added blktrace calls to the RAID4/5/6 driver. However, when device-mapper is used to create RAID4/5/6 arrays, the mddev->gendisk and mddev->queue fields are not setup. Therefore, calling things like trace_block_bio_remap will cause a kernel oops. This patch conditionalizes those calls on whether the proper fields exist to make the calls. (Device-mapper will call trace_block_bio_remap on its own.) This patch is suitable for the 3.8.y stable kernel. Cc: stable@vger.kernel.org (v3.8+) Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
| * | md/raid5: schedule_construction should abort if nothing to do.NeilBrown2013-03-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 1ed850f356a0a422013846b5291acff08815008b md/raid5: make sure to_read and to_write never go negative. It has been possible for handle_stripe_dirtying to be called when there isn't actually any work to do. It then calls schedule_reconstruction() which will set R5_LOCKED on the parity block(s) even when nothing else is happening. This then causes problems in do_release_stripe(). So add checks to schedule_reconstruction() so that if it doesn't find anything to do, it just aborts. This bug was introduced in v3.7, so the patch is suitable for -stable kernels since then. Cc: stable@vger.kernel.org (v3.7+) Reported-by: majianpeng <majianpeng@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
* | | Merge tag 'upstream-linus' of ↵Linus Torvalds2013-03-23
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev Pull libata updates from Jeff Garzik: "Simple stuff. See one-line summaries." * tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: pata_samsung_cf: use module_platform_driver_probe() [libata] Avoid specialized TLA's in ZPODD's Kconfig libata-acpi.c: fix copy and paste mistake in ata_acpi_register_power_resource sata_fsl: Remove redundant NULL check before kfree ahci: Add Device IDs for Intel Wellsburg PCH ata_piix: Add MODULE_PARM_DESC to prefer_ms_hyperv
| * | | pata_samsung_cf: use module_platform_driver_probe()Jingoo Han2013-03-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch uses module_platform_driver_probe() macro which makes the code smaller and simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * | | [libata] Avoid specialized TLA's in ZPODD's KconfigAaron Lu2013-03-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ODD is not a common TLA for non-ATA people so they will get confused by its meaning when they are configuring the kernel. This patch fixed this problem by using ODD only after stating what it is. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * | | libata-acpi.c: fix copy and paste mistake in ata_acpi_register_power_resourceSander Eikelenboom2013-03-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix a copy and paste mistake introduced in: commit bc9b6407bd6df3ab7189e5622816bbc11ae9d2d8 "ACPI / PM: Rework the handling of devices depending on power resources" Signed-off-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * | | sata_fsl: Remove redundant NULL check before kfreeSyam Sidhardhan2013-03-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | kfree on NULL pointer is a no-op. Signed-off-by: Syam Sidhardhan <s.syam@samsung.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * | | ahci: Add Device IDs for Intel Wellsburg PCHJames Ralston2013-03-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the RAID-mode SATA Device IDs for the Intel Wellsburg PCH Signed-off-by: James Ralston <james.d.ralston@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * | | ata_piix: Add MODULE_PARM_DESC to prefer_ms_hypervAndrew Brownfield2013-03-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In reference to the commit cd006086fa5d91414d8ff9ff2b78fbb593878e3c "ata_piix: defer disks to the Hyper-V drivers by default", this trivial patch adds a description to prefer_ms_hyperv. [rvrbovsk@redhat.com: MODULE_PARM_DESC() string formatting modified] Signed-off-by: Andrew Brownfield <abrownfi@redhat.com> Signed-off-by: Radomir Vrbovsky <rvrbovsk@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* | | | Merge branch 'i2c/for-current' of ↵Linus Torvalds2013-03-23
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "One bugfix for the tegra driver. Two updates regarding email addresses and MAINTAINERS which I like to have up-to-date so people can be reached immediately. While we are here, there is on PCI_ID addition." * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: MAINTAINERS: add maintainer entry for atmel i2c driver i2c: Fix my e-mail address in drivers and documentation i2c: iSMT: add Intel Avoton DeviceIDs i2c: tegra: check the clk_prepare_enable() return value
| * | | | MAINTAINERS: add maintainer entry for atmel i2c driverLudovic Desroches2013-03-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Create an entry for atmel i2c driver: i2c-at91.c Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | | | i2c: Fix my e-mail address in drivers and documentationGuenter Roeck2013-03-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | My old e-mail address is no longer working. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | | | i2c: iSMT: add Intel Avoton DeviceIDsSeth Heasley2013-03-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the iSMT SMBus Controller DeviceIDs for the Intel Avoton SOC. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | | | i2c: tegra: check the clk_prepare_enable() return valueLaxman Dewangan2013-03-22
| | |_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | NVIDIA's Tegra SoC allows read/write of controller register only if controller clock is enabled. System hangs if read/write happens to registers without enabling clock. clk_prepare_enable() can be fail due to unknown reason and hence adding check for return value of this function. If this function success then only access register otherwise return to caller with error. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
* | | | Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds2013-03-23
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull watchdog fixes from Wim Van Sebroeck: "Fix a boot issues and correct the AcpiMmioSel bitmask in the sp5100_tco watchdog device driver" * git://www.linux-watchdog.org/linux-watchdog: watchdog: sp5100_tco: Set the AcpiMmioSel bitmask value to 1 instead of 2 watchdog: sp5100_tco: Remove code that may cause a boot failure
| * | | | watchdog: sp5100_tco: Set the AcpiMmioSel bitmask value to 1 instead of 2Takahisa Tanaka2013-03-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The AcpiMmioSel bit is bit 1 in the AcpiMmioEn register, but the current sp5100_tco driver is using bit 2. See 2.3.3 Power Management (PM) Registers page 150 of the AMD SB800-Series Southbridges Register Reference Guide [1]. AcpiMmioEn - RW – 8/16/32 bits - [PM_Reg: 24h] Field Name Bits Default Description AcpiMMioDecodeEn 0 0b Set to 1 to enable AcpiMMio space. AcpiMMIoSel 1 0b Set AcpiMMio registers to be memory-mapped or IO-mapped space. 0: Memory-mapped space 1: I/O-mapped space The sp5100_tco driver expects zero as a value of AcpiMmioSel (bit 1). Fortunately, no problems were caused by this typo, because the default value of the undocumented misused bit 2 seems to be zero. However, the sp5100_tco driver should use the correct bitmask value. [1] http://support.amd.com/us/Embedded_TechDocs/45482.pdf Signed-off-by: Takahisa Tanaka <mc74hc00@gmail.com> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: stable <stable@vger.kernel.org>
| * | | | watchdog: sp5100_tco: Remove code that may cause a boot failureTakahisa Tanaka2013-03-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A problem was found on PC's with the SB700 chipset: The PC fails to load BIOS after running the 3.8.x kernel until the power is completely cut off. It occurs in all 3.8.x versions and the mainline version as of 2/4. The issue does not occur with the 3.7.x builds. There are two methods for accessing the watchdog registers. 1. Re-programming a resource address obtained by allocate_resource() to chipset. 2. Use the direct memory-mapped IO access. The method 1 can be used by all the chipsets (SP5100, SB7x0, SB8x0 or later). However, experience shows that only PC with the SB8x0 (or later) chipsets can use the method 2. This patch removes the method 1, because the critical problem was found. That's why the watchdog timer was able to be used on SP5100 and SB7x0 chipsets until now. Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1116835 Link: https://lkml.org/lkml/2013/2/14/271 Signed-off-by: Takahisa Tanaka <mc74hc00@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: stable <stable@vger.kernel.org>
* | | | | KMS: fix EDID detailed timing frame rateTorsten Duwe2013-03-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When KMS has parsed an EDID "detailed timing", it leaves the frame rate zeroed. Consecutive (debug-) output of that mode thus yields 0 for vsync. This simple fix also speeds up future invocations of drm_mode_vrefresh(). While it is debatable whether this qualifies as a -stable fix I'd apply it for consistency's sake; drm_helper_probe_single_connector_modes() does the same thing already for all probed modes. Cc: stable@vger.kernel.org Signed-off-by: Torsten Duwe <duwe@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | KMS: fix EDID detailed timing vsync parsingTorsten Duwe2013-03-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | EDID spreads some values across multiple bytes; bit-fiddling is needed to retrieve these. The current code to parse "detailed timings" has a cut&paste error that results in a vsync offset of at most 15 lines instead of 63. See http://en.wikipedia.org/wiki/EDID and in the "EDID Detailed Timing Descriptor" see bytes 10+11 show why that needs to be a left shift. Cc: stable@vger.kernel.org Signed-off-by: Torsten Duwe <duwe@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | Merge git://git.infradead.org/users/willy/linux-nvmeLinus Torvalds2013-03-22
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull NVMe driver update from Matthew Wilcox: "These patches have mostly been baking for a few months; sorry I didn't get them in during the merge window. They're all bug fixes, except for the addition of the SMART log and the addition to MAINTAINERS." * git://git.infradead.org/users/willy/linux-nvme: NVMe: Add namespaces with no LBA range feature MAINTAINERS: Add entry for the NVMe driver NVMe: Initialize iod nents to 0 NVMe: Define SMART log NVMe: Add result to nvme_get_features NVMe: Set result from user admin command NVMe: End queued bio requests when freeing queue NVMe: Free cmdid on nvme_submit_bio error
| * | | | | NVMe: Add namespaces with no LBA range featureKeith Busch2013-03-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The LBA Range Type feature is optional in the NVMe specification, so we should continue with adding namespaces for controllers that do not implement this feature. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
| * | | | | MAINTAINERS: Add entry for the NVMe driverMatthew Wilcox2012-11-13
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
| * | | | | NVMe: Initialize iod nents to 0Keith Busch2012-11-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For commands that do not map a scatter list, we need to initilaize the iod's number of sg entries (nents) to 0 and not unmap in this case. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
| * | | | | NVMe: Define SMART logKeith Busch2012-11-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This data structure is defined in the NVMe specification. It's not used by the kernel, but is available for use by userspace software. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
| * | | | | NVMe: Add result to nvme_get_featuresKeith Busch2012-11-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | nvme_get_features() was not returning the result. Add a parameter to return the result in (similar to nvme_set_features()) and change all callers. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
| * | | | | NVMe: Set result from user admin commandKeith Busch2012-11-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ioctl data structure includes space for the 'result' of the admin command to be returned; it just wasn't filled in. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
| * | | | | NVMe: End queued bio requests when freeing queueKeith Busch2012-11-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the queue has bios queued on it when it is freed, bio_endio() must be called for them first. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
| * | | | | NVMe: Free cmdid on nvme_submit_bio errorKeith Busch2012-11-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | nvme_map_bio() is called after the cmdid is allocated, so we have to free the cmdid before returning from nvme_submit_bio() if nvme_map_bio() returned an error. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
* | | | | | Merge branch 'akpm' (fixes from Andrew)Linus Torvalds2013-03-22
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge misc fixes from Andrew Morton. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mqueue: sys_mq_open: do not call mnt_drop_write() if read-only mm/hotplug: only free wait_table if it's allocated by vmalloc dma-debug: update DMA debug API to better handle multiple mappings of a buffer dma-debug: fix locking bug in check_unmap() drivers/rtc/rtc-at91rm9200.c: use a variable for storing IMR drivers/video/ep93xx-fb.c: include <linux/io.h> for devm_ioremap() drivers/rtc/rtc-da9052.c: fix for rtc device registration mm: zone_end_pfn is too small poweroff: change orderly_poweroff() to use schedule_work() mm/hugetlb: fix total hugetlbfs pages count when using memory overcommit accouting printk: Provide a wake_up_klogd() off-case irq_work.h: fix warning when CONFIG_IRQ_WORK=n
| * | | | | | mqueue: sys_mq_open: do not call mnt_drop_write() if read-onlyVladimir Davydov2013-03-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mnt_drop_write() must be called only if mnt_want_write() succeeded, otherwise the mnt_writers counter will diverge. mnt_writers counters are used to check if remounting FS as read-only is OK, so after an extra mnt_drop_write() call, it would be impossible to remount mqueue FS as read-only. Besides, on umount a warning would be printed like this one: ===================================== [ BUG: bad unlock balance detected! ] 3.9.0-rc3 #5 Not tainted ------------------------------------- a.out/12486 is trying to release lock (sb_writers) at: mnt_drop_write+0x1f/0x30 but there are no more locks to release! Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Doug Ledford <dledford@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | | | | | mm/hotplug: only free wait_table if it's allocated by vmallocJianguo Wu2013-03-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | zone->wait_table may be allocated from bootmem, it can not be freed. Signed-off-by: Jianguo Wu <wujianguo@huawei.com> Reviewed-by: Tang Chen <tangchen@cn.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | | | | | dma-debug: update DMA debug API to better handle multiple mappings of a bufferAlexander Duyck2013-03-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There were reports of the igb driver unmapping buffers without calling dma_mapping_error. On closer inspection issues were found in the DMA debug API and how it handled multiple mappings of the same buffer. The issue I found is the fact that the debug_dma_mapping_error would only set the map_err_type to MAP_ERR_CHECKED in the case that the was only one match for device and device address. However in the case of non-IOMMU, multiple addresses existed and as a result it was not setting this field once a second mapping was instantiated. I have resolved this by changing the search so that it instead will now set MAP_ERR_CHECKED on the first buffer that matches the device and DMA address that is currently in the state MAP_ERR_NOT_CHECKED. A secondary side effect of this patch is that in the case of multiple buffers using the same address only the last mapping will have a valid map_err_type. The previous mappings will all end up with map_err_type set to MAP_ERR_CHECKED because of the dma_mapping_error call in debug_dma_map_page. However this behavior may be preferable as it means you will likely only see one real error per multi-mapped buffer, versus the current behavior of multiple false errors mer multi-mapped buffer. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Reviewed-by: Shuah Khan <shuah.khan@hp.com> Tested-by: Shuah Khan <shuah.khan@hp.com> Cc: Jakub Kicinski <kubakici@wp.pl> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | | | | | dma-debug: fix locking bug in check_unmap()Alexander Duyck2013-03-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In check_unmap() it is possible to get into a dead-locked state if dma_mapping_error is called. The problem is that the bucket is locked in check_unmap, and locked again by debug_dma_mapping_error which is called by dma_mapping_error. To resolve that we must release the lock on the bucket before making the call to dma_mapping_error. [akpm@linux-foundation.org: restore 80-col trickery to be consistent with the rest of the file] Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Reviewed-by: Shuah Khan <shuah.khan@hp.com> Tested-by: Shuah Khan <shuah.khan@hp.com> Cc: Jakub Kicinski <kubakici@wp.pl> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | | | | | drivers/rtc/rtc-at91rm9200.c: use a variable for storing IMRNicolas Ferre2013-03-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On some revisions of AT91 SoCs, the RTC IMR register is not working. Instead of elaborating a workaround for that specific SoC or IP version, we simply use a software variable to store the Interrupt Mask Register and modify it for each enabling/disabling of an interrupt. The overhead of this is negligible anyway. The interrupt mask register (IMR) for the RTC is broken on the AT91SAM9x5 sub-family of SoCs (good overview of the members here: http://www.eewiki.net/display/linuxonarm/AT91SAM9x5 ). The "user visible effect" is the RTC doesn't work. That sub-family is less than two years old and only has devicetree (DT) support and came online circa lk 3.7 . The dust is yet to settle on the DT stuff at least for AT91 SoCs (translation: lots of stuff is still broken, so much that it is hard to know where to start). The fix in the patch is pretty simple: just shadow the silicon IMR register with a variable in the driver. Some older SoCs (pre-DT) use the the rtc-at91rm9200 driver (e.g. obviously the AT91RM9200) and they should not be impacted by the change. There shouldn't be a large volume of interrupts associated with a RTC. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Reported-by: Douglas Gilbert <dgilbert@interlog.com> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | | | | | drivers/video/ep93xx-fb.c: include <linux/io.h> for devm_ioremap()H Hartley Sweeten2013-03-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit be8678149701 ("drivers/video/ep93xx-fb.c: use devm_ functions") introduced a build error: drivers/video/ep93xx-fb.c: In function 'ep93xxfb_probe': drivers/video/ep93xx-fb.c:532: error: implicit declaration of function 'devm_ioremap' drivers/video/ep93xx-fb.c:533: warning: assignment makes pointer from integer without a cast Include <linux/io.h> to pickup the declaration of 'devm_ioremap'. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Acked-by: Ryan Mallon <rmallon@gmail.com> Cc: Damien Cassou <damien.cassou@lifl.fr> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-27 12:54:14 -0500