aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
* Merge branch 'for-linus' into for-nextTakashi Iwai2014-06-03
|\ | | | | | | Just to catch up a few small fixes for HD-audio and DMA engine.
| * ALSA: hda/realtek - Fix COEF widget NID for ALC260 replacer fixupTakashi Iwai2014-06-02
| | | | | | | | | | | | | | | | | | | | | | The conversion to a fixup table for Replacer model with ALC260 in commit 20f7d928 took the wrong widget NID for COEF setups. Namely, NID 0x1a should have been used instead of NID 0x20, which is the common node for all Realtek codecs but ALC260. Fixes: 20f7d928fa6e ('ALSA: hda/realtek - Replace ALC260 model=replacer with the auto-parser') Cc: <stable@vger.kernel.org> [v3.4+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: hda/realtek - Correction of fixup codes for PB V7900 laptopRonan Marquet2014-06-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Correcion of wrong fixup entries add in commit ca8f0424 to replace static model quirk for PB V7900 laptop (will model). [note: the removal of ALC260_FIXUP_HP_PIN_0F chain is also needed as a part of the fix; otherwise the pin is set up wrongly as a headphone, and user-space (PulseAudio) may be wrongly trying to detect the jack state -- tiwai] Fixes: ca8f04247eaa ('ALSA: hda/realtek - Add the fixup codes for ALC260 model=will') Signed-off-by: Ronan Marquet <ronan.marquet@orange.fr> Cc: <stable@vger.kernel.org> [v3.4+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: hda/analog - Fix silent output on ASUS A8JNTakashi Iwai2014-05-30
| | | | | | | | | | | | | | | | | | | | | | ASUS A8JN with AD1986A codec seems following the normal EAPD in the normal order (0 = off, 1 = on) unlike other machines with AD1986A. Apply the workaround used for Toshiba laptop that showed the same problem. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=75041 Cc: <stable@vger.kernel.org> [3.11+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: hda - Fix onboard audio on Intel H97/Z97 chipsetsTakashi Iwai2014-05-23
| | | | | | | | | | | | | | | | | | | | | | The recent Intel H97/Z97 chipsets need the similar setups like other Intel chipsets for snooping, etc. Especially without snooping, the audio playback stutters or gets corrupted. This fix patch just adds the corresponding PCI ID entry with the proper flags. Reported-and-tested-by: Arthur Borsboom <arthurborsboom@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: pcm_dmaengine: Add check during device suspendTushar Behera2014-05-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently snd_dmaengine_pcm_trigger() calls dmaengine_pause() unconditinally during device suspend. In case where DMA controller doesn't support PAUSE/RESUME functionality, this call is not able to stop the DMA controller. In this scenario, audio playback doesn't resume after device resume. Calling dmaengine_pause/dmaengine_terminate_all conditionally fixes the issue. It has been tested with audio playback on Samsung platform having PL330 DMA controller which doesn't support PAUSE/RESUME. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: firewire-lib: Remove a comment about restriction of asynchronous operationTakashi Sakamoto2014-06-03
| | | | | | | | | | | | | | | | | | | | | | The comment for fcp_avc_transaction() describes it doesn't support this type of operation. But it was already supported by this commit. 00a7bb81c20f3e81711e28e0f6c08cee8fd18514 ALSA: firewire-lib: Add support for deferred transaction Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: firewire-lib: Use IEC 61883-6 compliant labels for Raw Audio dataTakashi Sakamoto2014-06-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to AM824 in IEC 61883-6:2002, 2 bits in LSB of label for Raw Audio data means Valid Length Code (VBL). Ths value is: - b00 for 24 bits sample (label is 0x40) - b01 for 20 bits sample (label is 0x41) - b10 for 16 bits sample (label is 0x42) But current firewire-lib apply 24 bits label for both of 16/24 bits samples. As long as developers investigate BeBoB/Fireworks/OXFW/Dice, all of them have a behaviour to ignore the label. They can generate correct sound even if firewire-lib gives wrong label (i.e. 0xff). On BeBoB, this is not only for Raw Audio data channel, but also for IEC 60958 Conformant data channel. So there is little possibility of regression. Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: bebob: sizeof() vs ARRAY_SIZE() typoDan Carpenter2014-06-01
| | | | | | | | | | | | | | | | | | | | | | ARRAY_SIZE() was intended here instead of sizeof(). The "bridgeco_freq_table" array holds integers so the original condition is never true. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewd-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: synth: emux: soundfont.c: Cleaning up memory leakRickard Strandqvist2014-06-01
| | | | | | | | | | | | | | | | | | | | | | | | There is a risk for memory leak in when something unexpected happens and the function returns. This was largely found by using a static code analysis program called cppcheck. [fixed a typo of kfree() by tiwai] Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: Docs: Fix typo in tegra_hda doc.Dylan Reid2014-05-31
| | | | | | | | | | | | | | The correct name of the third clock is hda2codec_2x. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: firewire: Fix dependency on PCM and rawmidiTakashi Iwai2014-05-30
| | | | | | | | | | | | | | | | | | | | | | | | | | Now snd-firewire-lib supports rawmidi in addition to PCM, thus we need to give a proper dependency. For fixing and simplification, move the selections of SND_PCM and SND_RAWMIDI into SND_FIREWIRE_LIB section. Then each driver doesn't have to select them but only SND_FIREWIRE_LIB. Reported-by: Jim Davis <jim.epost@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: gus: remove checks for CONFIG_SND_DEBUG_ROMPaul Bolle2014-05-30
| | | | | | | | | | | | | | | | | | Checks for CONFIG_SND_DEBUG_ROM were added in v2.5.5 but a Kconfig symbol SND_DEBUG_ROM was never added. These checks have always evaluated to false. Remove them and the printk()s they hide. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | sound: remove checks for CONFIG_BCM_CS4297A_CSWARMPaul Bolle2014-05-30
| | | | | | | | | | | | | | | | | | Checks for CONFIG_BCM_CS4297A_CSWARM were added in v2.6.11. The related Kconfig symbol was never added so these checks always evaluated to true. Remove them. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - move some alc662 family machines to hda_pin_quirk tableHui Wang2014-05-29
| | | | | | | | | | Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - move some alc269 family machines to hda_pin_quirk tableHui Wang2014-05-29
| | | | | | | | | | Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | Revert "ALSA: hda - drop def association and sequence from pinconf comparing"Hui Wang2014-05-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit c687200b9d4ef60042a50f7d942cfef120cc7bf1. Dropping the def association and sequence from pinconf comparing is a bit risky, It will introduce a greater risk of catching unwanted machines. And in addition, so far no BIOS experts give us an explicit answer whether it makes senses to compare these two fields or not. For safety reason, we revert this commit. Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: fireworks: small leak on error pathDan Carpenter2014-05-29
| | | | | | | | | | | | | | | | | | There was a typo here so we return directly instead of freeing "hwinfo". Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewd-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: fireworks: remove some stray checksDan Carpenter2014-05-29
| | | | | | | | | | | | | | | | | | We checked "err" earlier. These things seem to be left over code. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewd-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: au1x00: Use resource_size instead of computationBenoit Taine2014-05-28
| | | | | | | | | | | | | | | | This issue was reported by coccicheck using the semantic patch at scripts/coccinelle/api/resource_size.cocci Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | Merge branch 'topic/firewire' into for-nextTakashi Iwai2014-05-27
|\ \ | | | | | | | | | This is a merge of big firewire audio stack updates by Takashi Sakamoto.
| * | ALSA: bebob: Improve comments about stream formatTakashi Sakamoto2014-05-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently bebob driver apply Raw Audio Data channel (in IEC 61883-1:2002, Multi Bit Linear Audio Data channel in IEC 61883-6:20005) to IEC 60958 Conformant Data channel because both fireworks and bebob based devices can handle it by ignoring each label. This patch improves a comment about this. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | ALSA: bebob: Remove meaningless mutex_unlock()Takashi Sakamoto2014-05-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | Currently mutex_unlock() is called in module's cleanup function. But after cleaned up, this mutex is automatically released. So this function call is meaningless. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | ALSA: bebob: Add static specifier to identifier with file scopeTakashi Sakamoto2014-05-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | Some variables were declared without static even if they're not referred to from external files. This commit make them local symbols for better information-hiding by file unit. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | ALSA: bebob: Use different names for identifiers in the same fileTakashi Sakamoto2014-05-27
| | | | | | | | | | | | | | | | | | | | | To suppress 'sparse' warning. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | ALSA: fireworks/bebob: Improve indentationTakashi Sakamoto2014-05-27
| | | | | | | | | | | | | | | | | | | | | According to coding rule. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | ALSA: fireworks/bebob: Add suffix for long long integer literalTakashi Sakamoto2014-05-27
| | | | | | | | | | | | | | | | | | | | | | | | This commit adds suffix to register values of each device, to supress 'sparse' warnings. Additionally, this commit changes offset values with integer literal. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | ALSA: fireworks/bebob: Use the same type of variables as function parametersTakashi Sakamoto2014-05-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The second argument of snd_efw_command_get_sampling_rate() means sampling rate and its type is 'unsigned int'. But 'int' variable is passed as parameter. It's better to apply the same type for the variable as its argument. Similally, the type of variable for snd_efw_command_get_clock_source() and avc_bridgeco_get_plug_type() should be the same type as each argument. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | ALSA: fireworks/bebob: Change type of argument for sampling rateTakashi Sakamoto2014-05-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | Originally, I intent to this argument given with 'struct snd_pcm_runtime.rate' or params_rate(). They return value of 'unsigned int'. So 'unsigned int' is better for the type of this argument. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | ALSA: fireworks: Use the same prototype for functions as actual declarationTakashi Sakamoto2014-05-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are two modes for Fireworks, IEC 61883 compliant or Windows. So it's better to use enum type instead of int to express the intension, even if C language specification defines to handle enum variables as usual integer. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | ALSA: fireworks: Fix wrong value as argument for PTR_ERR()Takashi Sakamoto2014-05-27
| | | | | | | | | | | | | | | | | | | | | The return value of memdup_user() should be passed to return correct error. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | ALSA: firewire-lib: Fix sparse warning of incorrect type in assignmentTakashi Sakamoto2014-05-27
| | | | | | | | | | | | | | | | | | | | | __be32 value should not be assigned directly to bool value. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | ALSA: firewire-lib: Use ARRAY_SIZE() instead of sizeof() for correct loop limitTakashi Sakamoto2014-05-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit fixes a big for loop count with array. The limitation of loop count should be calcurated with the number of elements in the array, not with the number of bytes. Aditionally, this commit apply the same declaration as a prototype in header for the array. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | ALSA: firewire/bebob: Add a workaround for M-Audio special Firewire seriesTakashi Sakamoto2014-05-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In post commit, a quirk of this firmware about transactions is reported. This commit apply a workaround for this quirk. They often fail transactions due to gap_count mismatch. This state is changed by generating bus reset. The fw_schedule_bus_reset() is an exported symbol in firewire-core. But there are no header for public. This commit moves its prototype from drivers/firewire/core.h to include/linux/firewire.h. This mismatch still affects bus management before generating this bus reset. It still takes a time to call driver's probe() because transactions are still often failed. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | ALSA: bebob: Send a cue to load firmware for M-Audio Firewire seriesTakashi Sakamoto2014-05-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Just powering on, these devices below wait to download firmware. - Firewire Audiophile - Firewire 410 - Firewire 1814 - ProjectMix I/O But firmware version 5058 or later, flash memory in the device stores the firmware. So this driver can enable these devices by sending a certain cue to load the firmware. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | ALSA: bebob: Add a quirk of data blocks for MIDI messages for some M-Audio ↵Takashi Sakamoto2014-05-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | devices The firmwares for M-Audio Firewire 410/1814 and ProjectMix I/O has a quirk to ignore MIDI messages in data blocks more than 8. This commit uses a flag which Fireworks uses for a similar quirk. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | ALSA: bebob/firewire-lib: Add a quirk of wrong dbc in empty packet for ↵Takashi Sakamoto2014-05-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | M-Audio special Firewire series M-Audio Firewire 1814 has a quirk, ProjectMix I/O also has. They transmit empty packet with wrong value of dbc incremented by 8 at high sampling rate. According to IEC 61883-1, this value should be the same as the one in previous packet. This commit adds a flag named as CIP_EMPTY_HAS_WRONG_DBC. With flag, the value of dbc in empty packet is overwittern by an expected value. This is an example of this quirk: CIP Header 0 CIP Header 1 Payload size 010D0000 9004F759 210 010D0010 90040B59 210 010D0020 90042359 210 01020028 9004FFFF 2 <- 010D0030 90043759 210 010D0040 90044B59 210 010D0050 90046359 210 01020058 9004FFFF 2 <- 010D0060 90047759 210 010D0070 90048B59 210 010D0080 9004A359 210 01020088 9004FFFF 2 <- 010D0090 9004B759 210 010D00A0 9004CB59 210 010D00B0 9004E359 210 010200B8 9004FFFF 2 <- 010D00C0 9004F759 210 010D00D0 90040B59 210 010D00E0 90042359 210 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | ALSA: bebob: Add support for M-Audio special Firewire seriesTakashi Sakamoto2014-05-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit allows this driver to support some models which M-Audio produces with DM1000 but its firmware is special. They are: - Firewire 1814 - ProjectMix I/O They have heavily customized firmware. The usual operations can't be applied to them. For this reason, this commit adds a model specific member to 'struct snd_bebob' and some model specific functions. Some parameters are write-only so this commit also adds control interface for applications to set them. M-Audio special firmware quirks: - Just after powering on, they wait to download firmware. This state is changed when receiving cue. Then bus reset is generated and the device is recognized as a different model with the uploaded firmware. - They don't respond against BridgeCo AV/C extension commands. So drivers can't get their stream formations and so on. - They do not start to transmit packets only by establishing connection but also by receiving SIGNAL FORMAT command. - After booting up, they often fail to send response against driver's request due to mismatch of gap_count. This module don't support to upload firmware. Tested-by: Darren Anderson <darrena092@gmail.com> (ProjectMix I/O) Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | ALSA: bebob: Add support for M-Audio usual Firewire seriesTakashi Sakamoto2014-05-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit allows this driver to support some models which M-Audio produces with DM1000/DM1000E with usual firmware. They are: - Firewire 410 - Firewire AudioPhile - Firewire Solo - Ozonic - NRV10 - FirewireLightBridge According to a person who worked in BridgeCo, some models are produced with 'Pre-BeBoB'. This means that these products were released before BeBoB was officially produced, and later BeBoB specification was formed. So these models have some quirks. M-Audio usual firmware quirks: - Just after powering on, 'Firewire 410' waits to download firmware. This state is changed when receiving cue. Then bus reset is generated and the device is recognized as a different model with the uploaded firmware. - 'Firewire Audiophile' also waits to download firmware but its vendor id/model id is the same as the one after loading firmware. - The information of channel mapping for MIDI conformant data channel is invalid against BridgeCo specification. This commit adds some codes for these quirks but don't support to upload firmware. This commit also adds specific operations to get metering information. The metering information also includes status of clock synchronization if the model supports to switch source of clock. The specification of FirewireLightBridge is unknown. So in this time, normal operations are applied for this model. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | ALSA: bebob: Add support for Focusrite Saffire/SaffirePro seriesTakashi Sakamoto2014-05-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit allows this driver to support all of models which Focusrite produces with DM1000/BeBoB. They are: - Saffire - Saffire LE - SaffirePro 10 I/O - SaffirePro 26 I/O This commit adds Focusrite specific operations: 1. Get source of clock 2. Get/Set sampling frequency 3. Get metering information The driver uses these functionalities to read/write specific address by async transaction. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | ALSA: bebob: Add support for Yamaha GO seriesTakashi Sakamoto2014-05-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit allows this driver to support all of models which Yamaha produced with DM1000/BeBoB. They are: - GO44 - GO46 This commit adds Yamaha specific operations. To get source of clock, AV/C Audio Subunit command is used. I note that their appearances are similar to some models of TerraTec; 'Go44' is similar to 'PHASE 24 FW' and 'GO46' is similar to 'PHASE X24 FW'. But their combination of Audio/Music subunits is a bit different. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | ALSA: bebob: Add support for Terratec PHASE, EWS series and AureonTakashi Sakamoto2014-05-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit allows this driver to support all of models which Terratec produced with DM1000/BeBoB. They are: - PHASE 24 FW - PHASE X24 FW - PHASE 88 Rack FW - EWS MIC2 - EWS MIC4 - Aureon 7.1 Firewire For Phase series, this commit adds a Terratec specific operation. To get source of clock. AV/C Audio Subunit command is used. For EWS series and Aureon, this module uses normal operations. Tested-by: Maximilian Engelhardt <maxi@daemonizer.de> (PHASE 24 FW) Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | ALSA: bebob: Prepare for device specific operationsTakashi Sakamoto2014-05-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit is for some devices which have its own operations or quirks. Many functionality should be implemented in user land. Then this commit adds functionality related to stream such as sampling frequency or clock source. For help to debug, this commit adds the functionality to get metering information if it's available. To help these functionalities, this commit adds some AV/C commands defined in 'AV/C Audio Subunit Specification (1394TA). Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | ALSA: bebob: Add hwdep interfaceTakashi Sakamoto2014-05-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This interface is designed for mixer/control application. By using hwdep interface, the application can get information about firewire node, can lock/unlock kernel streaming and can get notification at starting/stopping kernel streaming. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | ALSA: bebob: Add PCM interfaceTakashi Sakamoto2014-05-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds a functionality to capture/playback PCM samples. When AMDTP stream is already running for PCM or the source of clock is not internal, available sampling rate is limited at current one. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | ALSA: bebob: Add MIDI interfaceTakashi Sakamoto2014-05-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds a functionality to capture/playback MIDI messages. When no AMDTP streams are running, this module starts AMDTP stream at current sampling rate for MIDI substream. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | ALSA: bebob: Add proc interface for debugging purposeTakashi Sakamoto2014-05-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds proc interface to get these information for debugging: - firmware information - stream formation - current clock source and sampling rate Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | ALSA: bebob/firewire-lib: Add a quirk for discontinuity at bus resetTakashi Sakamoto2014-05-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Normal BeBoB firmware has a quirk. When receiving bus reset, it transmits packets with discontinuous value in dbc field. This causes two situation, one is to abort streaming by firewire-lib as a result of detecting the discontinuity. Another is to call driver's .update() because of bus reset. These two is generated independently. (The former depends on isochronous stream and the latter depends on IEEE1394 bus driver.) When BeBoB driver works with XRUN-recoverable applications, this situation looks like stream_start_duplex() call followed by stream_update_duplex() call because applications will call snd_pcm_prepare() immediately at XRUN. To update connections and streams at first, this commit use completion. When queueing error occurs, stream_start_duplex() is forced to wait maximum 1000msec. During this, when .update() is called, the completion is waken and stream_start_duplex() is processed without breaking connections. At bus reset, stream_start_duplex() shouldn't break/establish connections and stream_update_duplex() should update connections because a caller of fw_iso_resources_allocate() is responsible for calling fw_iso_resources_update() on bus reset. This commit also adds a flag, which has an effect to skip checking continuity for first packet. This flag is useful for BeBoB quirk to start handling packets during streaming. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | ALSA: bebob: Add commands and connections/streams managementTakashi Sakamoto2014-05-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds management functionality for connections and streams. BeBoB uses CMP to manage connections and uses AMDTP for streams. This commit also adds some BridgeCo's AV/C extension commands. There are some BridgeCo's AV/C extension commands but this commit just uses below commands to get device's capability and status: 1.Extended Plug Info commands - Plug Channel Position Specific Data - Plug Type Specific Data - Cluster(Section) Info Specific Data - Plug Input Specific Data 2.Extended Stream Format Information commands - Extended Stream Format Information Command - List Request For Extended Plug Info commands for Cluster Info Specific Data, I pick up 'section' instead of 'cluster' from document to prevent from misunderstanding because 'cluster' is also used in IEC 61883-6. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | ALSA: bebob: Add skelton for BeBoB based devicesTakashi Sakamoto2014-05-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds a new driver for BeBoB based devices with no specific operations. Currently this driver just create/remove card instance according to callbacks. BeBoB is 'BridgeCo enhanced Breakout Box'. This is installed to firewire devices with DM1000/DM1100/DM1500 chipset. It gives common way for host system to handle BeBoB based devices. Current supported devices: - Edirol FA-66/FA-101 - PreSonus FIREBOX/FIREPOD/FP10/Inspire1394 - BridgeCo RDAudio1/Audio5 - Mackie Onyx 1220/1620/1640 (Firewire I/O Card) - Mackie d.2 (Firewire Option) - Stanton FinalScratch 2 (ScratchAmp) - Tascam IF-FW DM - Behringer XENIX UFX 1204/1604 - Behringer Digital Mixer X32 series (X-UF Card) - Apogee Rosetta 200/Rosetta 400 (X-FireWire card) - Apogee DA-16X/AD-16X/DD-16X (X-FireWire card) - Apogee Ensemble - ESI Quotafire610 - AcousticReality eARMasterOne - CME MatrixKFW - Phonix Helix Board 12 MkII/18 MkII/24 MkII - Phonic Helix Board 12 Universal/18 Universal/24 Universal - Lynx Aurora 8/16 (LT-FW) - ICON FireXon - PrismSound Orpheus/ADA-8XR Devices possible to be supported if identifying IDs: - Apogee Mini-Me Firewire/Mini-DAC Firewire - Behringer F-Control Audio 610/1616 - Cakewalk Sonar Power Studio 66 - CME UF400e - ESI Quotafire XL - Infrasonic DewX/Windy6 - Mackie Digital X Bus x.200/400 - Phonic Helix Board 12/18/24 - Phonic FireFly 202/302 - Rolf Spuler Firewire Guitar Tested-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.2 (git 2.25.0) at 2025-09-08 18:34:36 -0400