aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
* arm: kirkwood: add support for ZyXEL NSA310Tero Jaasko2012-11-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hello, Andrew > > +#define NSA310_GPIO_LED_ESATA_GREEN 12 > > <..> > > +#define NSA310_GPIO_POWER_OFF 48 > > It looks like most of these are not used. Please remove them. True. Fixed. > > +static struct mtd_partition nsa310_mtd_parts[] = { > > + { > > + .name = "uboot", > > + .offset = 0, > > + .size = 0x100000, > > + .mask_flags = MTD_WRITEABLE, > > + }, { > > <..> > You should be able to put all that into DT. Take a look at Correct. I did the conversion and tested that the partitions can be read with dd and produce exactly the same data before and after conversion. So, the partition offsets at least should be fine. > > +static struct i2c_board_info __initdata nsa310_i2c_info[] = { > > + { I2C_BOARD_INFO("adt7476", 0x2e) }, > > +}; > > You can also do this in DT as well. kirkwood-ts219.dtsi has > > i2c@11000 { > status = "okay"; > clock-frequency = <400000>; Ok, I did convert the i2c definition to use the devicetree. The adt7476 device itself is not at reach of device tree, AFAIK and requires more work at there? Thanks for your valuable comments. Following is a new patch that should address the problems and mistakes you pointed and also some of the pointed by Jason Cooper. The nand and i2c are now defined at DT and I also removed the pointless defines and ARM_APPENDED_DTB. It is based against the Linus' official 3.6 version. Best regards, Tero Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: Kirkwood: new board USI TopkickJason Cooper2012-11-21
| | | | | | | | | | | | | | This is a new kirkwood box made by Universal Scientific Industrial, Inc. The product description is here: http://www.usish.com/english/products_topkick1281p2.php It is very similar to the dreamplug and other plug devices, with the exception that it has room for a 2.5" SATA HDD internally. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
* ARM: kirkwood: use gpio-fan DT binding on lsxlMichael Walle2012-11-21
| | | | | | | Remove board specific gpio-fan driver registration. Moved into device tree. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: Kirkwood: add Netspace boards to defconfigJason Cooper2012-11-21
| | | | Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: kirkwood: DT board setup for Network Space Mini v2Simon Guinot2012-11-21
| | | | | | | | | | | | | This patch adds DT board setup for the LaCie NAS Network Space Mini v2 (aka SafeBox). The hardware characteristics are very close to those of the Network Space Lite v2. The main difference are: - A GPIO fan which is only available on the NS2 Mini. - A single USB host port is wired on the NS2 Mini. The NS2 Lite provides an additional dual-mode USB port (host/device). Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: kirkwood: DT board setup for Network Space Lite v2Simon Guinot2012-11-21
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds DT board setup for the LaCie NAS Network Space Lite v2. This board is derived from the Network Space v2 and a lot of hardware characteristics are shared. - CPU: Marvell 88F6192 800Mhz - SDRAM memory: 128MB DDR2 200Mhz - 1 SATA port: internal - Gigabit ethernet: PHY Marvell 88E1318 - Flash memory: SPI NOR 512KB (Macronix MX25L4005A) - i2c EEPROM: 512 bytes (24C04 type) - 2 USB2 ports: host and host/device - 1 push button - 1 SATA LED (bi-color, blue and red) Note that the SATA LED is not compatible with the driver leds-ns2. The LED behaviour ("on", "off" or "SATA activity blink") is controlled via a single MPP (21). Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: kirkwood: DT board setup for Network Space v2 and parentsSimon Guinot2012-11-21
| | | | | | | | | | This patch adds DT board setup for LaCie Network Space v2 and parents, based on the Marvell Kirkwood 6281 SoC. This includes Network Space v2 (Max) and Internet Space v2. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* leds: leds-ns2: add device tree bindingSimon Guinot2012-11-21
| | | | | | Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: Kirkwood: Enable the second I2C busJason Gunthorpe2012-11-21
| | | | | | | | | mv64xxx_of_config requires that the tclk frequency be found through the clk stuff rather than through device tree, so add another override for the 2nd controller. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* Linux 3.7-rc6Linus Torvalds2012-11-16
|
* Merge git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2012-11-16
|\ | | | | | | | | | | | | | | Pull KVM fix from Marcelo Tosatti: "A correction for oops on module init with older Intel hosts." * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: Fix invalid secondary exec controls in vmx_cpuid_update()
| * KVM: x86: Fix invalid secondary exec controls in vmx_cpuid_update()Takashi Iwai2012-11-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commit [ad756a16: KVM: VMX: Implement PCID/INVPCID for guests with EPT] introduced the unconditional access to SECONDARY_VM_EXEC_CONTROL, and this triggers kernel warnings like below on old CPUs: vmwrite error: reg 401e value a0568000 (err 12) Pid: 13649, comm: qemu-kvm Not tainted 3.7.0-rc4-test2+ #154 Call Trace: [<ffffffffa0558d86>] vmwrite_error+0x27/0x29 [kvm_intel] [<ffffffffa054e8cb>] vmcs_writel+0x1b/0x20 [kvm_intel] [<ffffffffa054f114>] vmx_cpuid_update+0x74/0x170 [kvm_intel] [<ffffffffa03629b6>] kvm_vcpu_ioctl_set_cpuid2+0x76/0x90 [kvm] [<ffffffffa0341c67>] kvm_arch_vcpu_ioctl+0xc37/0xed0 [kvm] [<ffffffff81143f7c>] ? __vunmap+0x9c/0x110 [<ffffffffa0551489>] ? vmx_vcpu_load+0x39/0x1a0 [kvm_intel] [<ffffffffa0340ee2>] ? kvm_arch_vcpu_load+0x52/0x1a0 [kvm] [<ffffffffa032dcd4>] ? vcpu_load+0x74/0xd0 [kvm] [<ffffffffa032deb0>] kvm_vcpu_ioctl+0x110/0x5e0 [kvm] [<ffffffffa032e93d>] ? kvm_dev_ioctl+0x4d/0x4a0 [kvm] [<ffffffff8117dc6f>] do_vfs_ioctl+0x8f/0x530 [<ffffffff81139d76>] ? remove_vma+0x56/0x60 [<ffffffff8113b708>] ? do_munmap+0x328/0x400 [<ffffffff81187c8c>] ? fget_light+0x4c/0x100 [<ffffffff8117e1a1>] sys_ioctl+0x91/0xb0 [<ffffffff815a942d>] system_call_fastpath+0x1a/0x1f This patch adds a check for the availability of secondary exec control to avoid these warnings. Cc: <stable@vger.kernel.org> [v3.6+] Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* | Merge branch 'akpm' (Fixes from Andrew)Linus Torvalds2012-11-16
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge misc fixes from Andrew Morton. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (12 patches) revert "mm: fix-up zone present pages" tmpfs: change final i_blocks BUG to WARNING tmpfs: fix shmem_getpage_gfp() VM_BUG_ON mm: highmem: don't treat PKMAP_ADDR(LAST_PKMAP) as a highmem address mm: revert "mm: vmscan: scale number of pages reclaimed by reclaim/compaction based on failures" rapidio: fix kernel-doc warnings swapfile: fix name leak in swapoff memcg: fix hotplugged memory zone oops mips, arc: fix build failure memcg: oom: fix totalpages calculation for memory.swappiness==0 mm: fix build warning for uninitialized value mm: add anon_vma_lock to validate_mm()
| * | revert "mm: fix-up zone present pages"Andrew Morton2012-11-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Revert commit 7f1290f2f2a4 ("mm: fix-up zone present pages") That patch tried to fix a issue when calculating zone->present_pages, but it caused a regression on 32bit systems with HIGHMEM. With that change, reset_zone_present_pages() resets all zone->present_pages to zero, and fixup_zone_present_pages() is called to recalculate zone->present_pages when the boot allocator frees core memory pages into buddy allocator. Because highmem pages are not freed by bootmem allocator, all highmem zones' present_pages becomes zero. Various options for improving the situation are being discussed but for now, let's return to the 3.6 code. Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Petr Tesarik <ptesarik@suse.cz> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Acked-by: David Rientjes <rientjes@google.com> Tested-by: Chris Clayton <chris2553@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | tmpfs: change final i_blocks BUG to WARNINGHugh Dickins2012-11-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Under a particular load on one machine, I have hit shmem_evict_inode()'s BUG_ON(inode->i_blocks), enough times to narrow it down to a particular race between swapout and eviction. It comes from the "if (freed > 0)" asymmetry in shmem_recalc_inode(), and the lack of coherent locking between mapping's nrpages and shmem's swapped count. There's a window in shmem_writepage(), between lowering nrpages in shmem_delete_from_page_cache() and then raising swapped count, when the freed count appears to be +1 when it should be 0, and then the asymmetry stops it from being corrected with -1 before hitting the BUG. One answer is coherent locking: using tree_lock throughout, without info->lock; reasonable, but the raw_spin_lock in percpu_counter_add() on used_blocks makes that messier than expected. Another answer may be a further effort to eliminate the weird shmem_recalc_inode() altogether, but previous attempts at that failed. So far undecided, but for now change the BUG_ON to WARN_ON: in usual circumstances it remains a useful consistency check. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | tmpfs: fix shmem_getpage_gfp() VM_BUG_ONHugh Dickins2012-11-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fuzzing with trinity hit the "impossible" VM_BUG_ON(error) (which Fedora has converted to WARNING) in shmem_getpage_gfp(): WARNING: at mm/shmem.c:1151 shmem_getpage_gfp+0xa5c/0xa70() Pid: 29795, comm: trinity-child4 Not tainted 3.7.0-rc2+ #49 Call Trace: warn_slowpath_common+0x7f/0xc0 warn_slowpath_null+0x1a/0x20 shmem_getpage_gfp+0xa5c/0xa70 shmem_fault+0x4f/0xa0 __do_fault+0x71/0x5c0 handle_pte_fault+0x97/0xae0 handle_mm_fault+0x289/0x350 __do_page_fault+0x18e/0x530 do_page_fault+0x2b/0x50 page_fault+0x28/0x30 tracesys+0xe1/0xe6 Thanks to Johannes for pointing to truncation: free_swap_and_cache() only does a trylock on the page, so the page lock we've held since before confirming swap is not enough to protect against truncation. What cleanup is needed in this case? Just delete_from_swap_cache(), which takes care of the memcg uncharge. Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Dave Jones <davej@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | mm: highmem: don't treat PKMAP_ADDR(LAST_PKMAP) as a highmem addressWill Deacon2012-11-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | kmap_to_page returns the corresponding struct page for a virtual address of an arbitrary mapping. This works by checking whether the address falls in the pkmap region and using the pkmap page tables instead of the linear mapping if appropriate. Unfortunately, the bounds checking means that PKMAP_ADDR(LAST_PKMAP) is incorrectly treated as a highmem address and we can end up walking off the end of pkmap_page_table and subsequently passing junk to pte_page. This patch fixes the bound check to stay within the pkmap tables. Signed-off-by: Will Deacon <will.deacon@arm.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | mm: revert "mm: vmscan: scale number of pages reclaimed by ↵Mel Gorman2012-11-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | reclaim/compaction based on failures" Jiri Slaby reported the following: (It's an effective revert of "mm: vmscan: scale number of pages reclaimed by reclaim/compaction based on failures".) Given kswapd had hours of runtime in ps/top output yesterday in the morning and after the revert it's now 2 minutes in sum for the last 24h, I would say, it's gone. The intention of the patch in question was to compensate for the loss of lumpy reclaim. Part of the reason lumpy reclaim worked is because it aggressively reclaimed pages and this patch was meant to be a sane compromise. When compaction fails, it gets deferred and both compaction and reclaim/compaction is deferred avoid excessive reclaim. However, since commit c654345924f7 ("mm: remove __GFP_NO_KSWAPD"), kswapd is woken up each time and continues reclaiming which was not taken into account when the patch was developed. Attempts to address the problem ended up just changing the shape of the problem instead of fixing it. The release window gets closer and while a THP allocation failing is not a major problem, kswapd chewing up a lot of CPU is. This patch reverts commit 83fde0f22872 ("mm: vmscan: scale number of pages reclaimed by reclaim/compaction based on failures") and will be revisited in the future. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Zdenek Kabelac <zkabelac@redhat.com> Tested-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Johannes Hirte <johannes.hirte@fem.tu-ilmenau.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | rapidio: fix kernel-doc warningsRandy Dunlap2012-11-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix rapidio kernel-doc warnings: Warning(drivers/rapidio/rio.c:415): No description found for parameter 'local' Warning(drivers/rapidio/rio.c:415): Excess function parameter 'lstart' description in 'rio_map_inb_region' Warning(include/linux/rio.h:290): No description found for parameter 'switches' Warning(include/linux/rio.h:290): No description found for parameter 'destid_table' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Matt Porter <mporter@kernel.crashing.org> Acked-by: Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | swapfile: fix name leak in swapoffXiaotian Feng2012-11-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There's a name leak introduced by commit 91a27b2a7567 ("vfs: define struct filename and have getname() return it"). Add the missing putname. [akpm@linux-foundation.org: cleanup] Signed-off-by: Xiaotian Feng <dannyfeng@tencent.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | memcg: fix hotplugged memory zone oopsHugh Dickins2012-11-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When MEMCG is configured on (even when it's disabled by boot option), when adding or removing a page to/from its lru list, the zone pointer used for stats updates is nowadays taken from the struct lruvec. (On many configurations, calculating zone from page is slower.) But we have no code to update all the lruvecs (per zone, per memcg) when a memory node is hotadded. Here's an extract from the oops which results when running numactl to bind a program to a newly onlined node: BUG: unable to handle kernel NULL pointer dereference at 0000000000000f60 IP: __mod_zone_page_state+0x9/0x60 Pid: 1219, comm: numactl Not tainted 3.6.0-rc5+ #180 Bochs Bochs Process numactl (pid: 1219, threadinfo ffff880039abc000, task ffff8800383c4ce0) Call Trace: __pagevec_lru_add_fn+0xdf/0x140 pagevec_lru_move_fn+0xb1/0x100 __pagevec_lru_add+0x1c/0x30 lru_add_drain_cpu+0xa3/0x130 lru_add_drain+0x2f/0x40 ... The natural solution might be to use a memcg callback whenever memory is hotadded; but that solution has not been scoped out, and it happens that we do have an easy location at which to update lruvec->zone. The lruvec pointer is discovered either by mem_cgroup_zone_lruvec() or by mem_cgroup_page_lruvec(), and both of those do know the right zone. So check and set lruvec->zone in those; and remove the inadequate attempt to set lruvec->zone from lruvec_init(), which is called before NODE_DATA(node) has been allocated in such cases. Ah, there was one exceptionr. For no particularly good reason, mem_cgroup_force_empty_list() has its own code for deciding lruvec. Change it to use the standard mem_cgroup_zone_lruvec() and mem_cgroup_get_lru_size() too. In fact it was already safe against such an oops (the lru lists in danger could only be empty), but we're better proofed against future changes this way. I've marked this for stable (3.6) since we introduced the problem in 3.5 (now closed to stable); but I have no idea if this is the only fix needed to get memory hotadd working with memcg in 3.6, and received no answer when I enquired twice before. Reported-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | mips, arc: fix build failureDavid Rientjes2012-11-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Using a cross-compiler to fix another issue, the following build error occurred for mips defconfig: arch/mips/fw/arc/misc.c: In function 'ArcHalt': arch/mips/fw/arc/misc.c:25:2: error: implicit declaration of function 'local_irq_disable' Fix it up by including irqflags.h. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | memcg: oom: fix totalpages calculation for memory.swappiness==0Michal Hocko2012-11-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | oom_badness() takes a totalpages argument which says how many pages are available and it uses it as a base for the score calculation. The value is calculated by mem_cgroup_get_limit which considers both limit and total_swap_pages (resp. memsw portion of it). This is usually correct but since fe35004fbf9e ("mm: avoid swapping out with swappiness==0") we do not swap when swappiness is 0 which means that we cannot really use up all the totalpages pages. This in turn confuses oom score calculation if the memcg limit is much smaller than the available swap because the used memory (capped by the limit) is negligible comparing to totalpages so the resulting score is too small if adj!=0 (typically task with CAP_SYS_ADMIN or non zero oom_score_adj). A wrong process might be selected as result. The problem can be worked around by checking mem_cgroup_swappiness==0 and not considering swap at all in such a case. Signed-off-by: Michal Hocko <mhocko@suse.cz> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | mm: fix build warning for uninitialized valueDavid Rientjes2012-11-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | do_wp_page() sets mmun_called if mmun_start and mmun_end were initialized and, if so, may call mmu_notifier_invalidate_range_end() with these values. This doesn't prevent gcc from emitting a build warning though: mm/memory.c: In function `do_wp_page': mm/memory.c:2530: warning: `mmun_start' may be used uninitialized in this function mm/memory.c:2531: warning: `mmun_end' may be used uninitialized in this function It's much easier to initialize the variables to impossible values and do a simple comparison to determine if they were initialized to remove the bool entirely. Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | mm: add anon_vma_lock to validate_mm()Michel Lespinasse2012-11-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Iterating over the vma->anon_vma_chain without anon_vma_lock may cause NULL ptr deref in anon_vma_interval_tree_verify(), because the node in the chain might have been removed. BUG: unable to handle kernel paging request at fffffffffffffff0 IP: [<ffffffff8122c29c>] anon_vma_interval_tree_verify+0xc/0xa0 PGD 4e28067 PUD 4e29067 PMD 0 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC CPU 0 Pid: 9050, comm: trinity-child64 Tainted: G W 3.7.0-rc2-next-20121025-sasha-00001-g673f98e-dirty #77 RIP: 0010: anon_vma_interval_tree_verify+0xc/0xa0 Process trinity-child64 (pid: 9050, threadinfo ffff880045f80000, task ffff880048eb0000) Call Trace: validate_mm+0x58/0x1e0 vma_adjust+0x635/0x6b0 __split_vma.isra.22+0x161/0x220 split_vma+0x24/0x30 sys_madvise+0x5da/0x7b0 tracesys+0xe1/0xe6 RIP anon_vma_interval_tree_verify+0xc/0xa0 CR2: fffffffffffffff0 Figured out by Bob Liu. Reported-by: Sasha Levin <sasha.levin@oracle.com> Cc: Bob Liu <lliubbo@gmail.com> Signed-off-by: Michel Lespinasse <walken@google.com> Reviewed-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2012-11-16
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: 1) tx_filtered/ps_tx_buf queues need to be accessed with the SKB queue lock, from Arik Nemtsov. 2) Don't call 802.11 driver's filter configure method until it's actually open, from Felix Fietkau. 3) Use ieee80211_free_txskb otherwise we leak control information. From Johannes Berg. 4) Fix memory leak in bluetooth UUID removal,f rom Johan Hedberg. 5) The shift mask trick doesn't work properly when 'optname' is out of range in do_ip_setsockopt(). Use a straightforward switch statement instead, the compiler emits essentially the same code but without the missing range check. From Xi Wang. 6) Fix when we call tcp_replace_ts_recent() otherwise we can erroneously accept a too-high tsval. From Eric Dumazet. 7) VXLAN bug fixes, mostly to do with VLAN header length handling, from Alexander Duyck. 8) Missing return value initialization for IPV6_MINHOPCOUNT socket option handling. From Hannes Frederic. 9) Fix regression in tasklet handling in jme/ksz884x/xilinx drivers, from Xiaotian Feng. 10) At smsc911x driver init time, we don't know if the chip is in word swap mode or not. However we do need to wait for the control register's ready bit to be set before we program any other part of the chip. Adjust the wait loop to account for this. From Kamlakant Patel. 11) Revert erroneous MDIO bus unregister change to mdio-bitbang.c 12) Fix memory leak in /proc/net/sctp/, from Tommi Rantala. 13) tilegx driver registers IRQ with NULL name, oops, from Simon Marchi. 14) TCP metrics hash table kzalloc() based allocation can fail, back down to using vmalloc() if it does. From Eric Dumazet. 15) Fix packet steering out-of-order delivery regression, from Tom Herbert. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (40 commits) net-rps: Fix brokeness causing OOO packets tcp: handle tcp_net_metrics_init() order-5 memory allocation failures batman-adv: process broadcast packets in BLA earlier batman-adv: don't add TEMP clients belonging to other backbone nodes batman-adv: correctly pass the client flag on tt_response batman-adv: fix tt_global_entries flags update tilegx: request_irq with a non-null device name net: correct check in dev_addr_del() tcp: fix retransmission in repair mode sctp: fix /proc/net/sctp/ memory leak Revert "drivers/net/phy/mdio-bitbang.c: Call mdiobus_unregister before mdiobus_free" net/smsc911x: Fix ready check in cases where WORD_SWAP is needed drivers/net: fix tasklet misuse issue ipv4/ip_vti.c: VTI fix post-decryption forwarding brcmfmac: fix typo in CONFIG_BRCMISCAN vxlan: Update hard_header_len based on lowerdev when instantiating VXLAN vxlan: fix a typo. ipv6: setsockopt(IPIPPROTO_IPV6, IPV6_MINHOPCOUNT) forgot to set return value doc/net: Fix typo in netdev-features.txt vxlan: Fix error that was resulting in VXLAN MTU size being 10 bytes too large ...
| * | Merge branch 'for-davem' of ↵David S. Miller2012-11-16
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== This batch of fixes is intended for the 3.7 stream... This includes a pull of the Bluetooth tree. Gustavo says: "A few important fixes to go into 3.7. There is a new hw support by Marcos Chaparro. Johan added a memory leak fix and hci device index list fix. Also Marcel fixed a race condition in the device set up that was prevent the bt monitor to work properly. Last, Paulo Sérgio added a fix to the error status when pairing for LE fails. This was prevent userspace to work to handle the failure properly." Regarding the mac80211 pull, Johannes says: "I have a locking fix for some SKB queues, a variable initialization to avoid crashes in a certain failure case, another free_txskb fix from Felix and another fix from him to avoid calling a stopped driver, a fix for a (very unlikely) memory leak and a fix to not send null data packets when resuming while not associated." Regarding the iwlwifi pull, Johannes says: "Two more fixes for iwlwifi ... one to use ieee80211_free_txskb(), and one to check DMA mapping errors, please pull." On top of that, Johannes also included a wireless regulatory fix to allow 40 MHz on channels 12 and 13 in world roaming mode. Also, Hauke Mehrtens fixes a #ifdef typo in brcmfmac. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * \ Merge branch 'master' of ↵John W. Linville2012-11-16
| | |\ \ | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
| | | * | brcmfmac: fix typo in CONFIG_BRCMISCANHauke Mehrtens2012-11-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The old ifdef CONFIG_BRCMFISCAN looks wrong to me and it makes more sense when CONFIG_BRCMISCAN is used. This patch was just compile tested by me, but not runtime tested. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | | * | Merge branch 'master' of ↵John W. Linville2012-11-14
| | | |\ \ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
| | | | * | Bluetooth: Fix memory leak when removing a UUIDJohan Hedberg2012-11-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When removing a UUID from the list in the remove_uuid() function we must also kfree the entry in addition to removing it from the list. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
| | | | * | Bluetooth: ath3k: Add support for VAIO VPCEH [0489:e027]Marcos Chaparro2012-11-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added Atheros AR3011 internal bluetooth device found in Sony VAIO VPCEH to the devices list. Before this, the bluetooth module was identified as an Foxconn / Hai bluetooth device [0489:e027], now it claims to be an AtherosAR3011 Bluetooth [0cf3:3005]. T: Bus=01 Lev=02 Prnt=02 Port=04 Cnt=02 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e027 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Marcos Chaparro <marcos@mrkindustries.com.ar> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
| | | | * | Bluetooth: Notify about device registration before power onMarcel Holtmann2012-11-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is important that the monitor interface gets notified about a new device before its power on procedure has been started. For some reason that is no longer working as expected and the power on procedure runs first. It is safe to just notify about device registration and trigger the power on procedure afterwards. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
| | | | * | Bluetooth: Fix error status when pairing failsPaulo Sérgio2012-11-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When pairing fails due to wrong confirm value, the management layer doesn't report a proper error status. It sends MGMT_STATUS_CONNECT_FAILED instead of MGMT_STATUS_AUTH_FAILED. Most of management functions that receive a status as a parameter expects for it to be encoded as a HCI status. But when a SMP pairing fails, the SMP layer sends the SMP reason as the error status to the management layer. This commit maps all SMP reasons to HCI_ERROR_AUTH_FAILURE, which will be converted to MGMT_STATUS_AUTH_FAILED in the management layer. Reported-by: Claudio Takahasi <claudio.takahasi@openbossa.org> Reviewed-by: João Paulo Rechi Vita <jprvita@openbossa.org> Signed-off-by: Paulo Sérgio <paulo.sergio@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
| | | | * | Bluetooth: Fix having bogus entries in mgmt_read_index_list replyJohan Hedberg2012-11-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The mgmt_read_index_list uses one loop to calculate the max needed size of its response with the help of an upper-bound of the controller count. The second loop is more strict as it checks for HCI_SETUP (which might have gotten set after the first loop) and could result in some indexes being skipped. Because of this the function needs to readjust the event length and index count after filling in the response array. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Cc: stable@vger.kernel.org Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
| | | * | | Merge branch 'for-john' of ↵John W. Linville2012-11-14
| | | |\ \ \ | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
| | | | * | | iwlwifi: use ieee80211_free_txskbJohannes Berg2012-11-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To let mac80211 clean up any TX information when a frame is dropped, use ieee80211_free_txskb(). Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | | | * | | iwlwifi: handle DMA mapping failuresJohannes Berg2012-11-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The RX replenish code doesn't handle DMA mapping failures, which will cause issues if there actually is a failure. This was reported by Shuah Khan who found a DMA mapping framework warning ("device driver failed to check map error"). Cc: stable@vger.kernel.org Reported-by: Shuah Khan <shuah.khan@hp.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | | * | | | Merge branch 'for-john' of ↵John W. Linville2012-11-14
| | | |\ \ \ \ | | | | |_|/ / | | | |/| | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
| | | | * | | wireless: allow 40 MHz on world roaming channels 12/13Johannes Berg2012-11-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When in world roaming mode, allow 40 MHz to be used on channels 12 and 13 so that an AP that is, e.g., using HT40+ on channel 9 (in the UK) can be used. Cc: stable@vger.kernel.org Reported-by: Eddie Chapman <eddie@ehuk.net> Tested-by: Eddie Chapman <eddie@ehuk.net> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | | | * | | mac80211: call skb_dequeue/ieee80211_free_txskb instead of __skb_queue_purgeFelix Fietkau2012-11-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes more wifi status skb leaks, leading to hostapd/wpa_supplicant hangs. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | | | * | | mac80211: don't send null data packet when not associatedJohannes Berg2012-11-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On resume or firmware recovery, mac80211 sends a null data packet to see if the AP is still around and hasn't disconnected us. However, it always does this even if it wasn't even connected before, leading to a warning in the new channel context code. Fix this by checking that it's associated. Cc: stable@vger.kernel.org Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | | | * | | mac80211: fix memory leak in device registration error pathJohannes Berg2012-11-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the cipher suites need to be allocated, but this allocation fails, this leaks the internal scan request. Fix that by going to the correct error handling label. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | | | * | | mac80211: sync acccess to tx_filtered/ps_tx_buf queuesArik Nemtsov2012-11-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These are accessed without a lock when ending STA PSM. If the sta_cleanup timer accesses these lists at the same time, we might crash. This may fix some mysterious crashes we had during ieee80211_sta_ps_deliver_wakeup. Cc: stable@vger.kernel.org Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | | | * | | mac80211: init sched_scan_iesDavid Spinadel2012-10-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case that there is an unsupported band, the ie will be unallocated and the free will crash. Cc: stable@vger.kernel.org Signed-off-by: David Spinadel <david.spinadel@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | | | * | | mac80211: do not call ieee80211_configure_filter if no interfaces are upFelix Fietkau2012-10-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Drivers are not expected to handle it before drv_start has been called. It will be called again after an interface has been brought up. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | | | | | net-rps: Fix brokeness causing OOO packetsTom Herbert2012-11-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In commit c445477d74ab3779 which adds aRFS to the kernel, the CPU selected for RFS is not set correctly when CPU is changing. This is causing OOO packets and probably other issues. Signed-off-by: Tom Herbert <therbert@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | Merge tag 'batman-adv-fix-for-davem' of git://git.open-mesh.org/linux-mergeDavid S. Miller2012-11-16
| |\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Included fixes are: - update the client entry status flags when using the "early client detection". This makes the Distributed AP isolation correctly work; - transfer the client entry status flags when recovering the translation table from another node. This makes the Distributed AP isolation correctly work; - prevent the "early client detection mechanism" to add clients belonging to other backbone nodes in the same LAN. This breaks connectivity when using this mechanism together with the Bridge Loop Avoidance - process broadcast packets with the Bridge Loop Avoidance before any other component. BLA can possibly drop the packets based on the source address. This makes the "early client detection mechanism" correctly work when used with BLA. Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | | | | | batman-adv: process broadcast packets in BLA earlierAntonio Quartulli2012-11-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The logic in the BLA mechanism may decide to drop broadcast packets because the node may still be in the setup phase. For this reason, further broadcast processing like the early client detection mechanism must be done only after the BLA check. This patches moves the invocation to BLA before any other broadcast processing. This was introduced 30cfd02b60e1cb16f5effb0a01f826c5bb7e4c59 ("batman-adv: detect not yet announced clients") Reported-by: Glen Page <glen.page@thet.net> Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
| | * | | | | | batman-adv: don't add TEMP clients belonging to other backbone nodesAntonio Quartulli2012-11-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The "early client detection" mechanism must not add clients belonging to other backbone nodes. Such clients must be reached by directly using the LAN instead of the mesh. This was introduced by 30cfd02b60e1cb16f5effb0a01f826c5bb7e4c59 ("batman-adv: detect not yet announced clients") Reported-by: Glen Page <glen.page@thet.net> Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-23 18:55:45 -0500