aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
* Pull motherboard into test branchLen Brown2007-02-03
|\ | | | | | | | | | | | | | | Conflicts: drivers/acpi/motherboard.c Signed-off-by: Len Brown <len.brown@intel.com>
| * PNPACPI: remove EXPERIMENTAL dependencyBjorn Helgaas2007-01-26
| | | | | | | | | | | | | | | | | | | | PNPACPI is pretty widely used and seems fairly stable, so remove the dependency on EXPERIMENTAL. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Adam Belay <ambx1@neo.rr.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
| * ACPI: remove motherboard driver (redundant with PNP system driver)Bjorn Helgaas2007-01-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PNP system board driver (drivers/pnp/system.c) contains all the same functionality, so we don't need the ACPI version. Previously, a motherboard device would be claimed by *both* the ACPI and PNP drivers, resulting in stuff like this in /proc/ioports: 1200-121f : motherboard <-- from drivers/acpi/motherboard.c 1200-121f : pnp 00:0d <-- from drivers/pnp/system.c Make sure to enable CONFIG_PNP (and CONFIG_PNPACPI) to include the PNP system board driver. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
| * i386: turn on CONFIG_PNP in defconfigBjorn Helgaas2007-01-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I'm trying to remove drivers/acpi/motherboard.c, which is mostly redundant with drivers/pnp/system.c. So make sure that we include the PNP driver in the default config. Most distros enable this already. Turning on CONFIG_PNP also causes the following options to be enabled: CONFIG_PNPACPI CONFIG_SERIAL_8250_PNP CONFIG_SERIAL_8250_PNP causes legacy serial ports to be discovered twice, which is ugly but harmless: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
| * PNP: system.c whitespace cleanupBjorn Helgaas2007-01-26
| | | | | | | | | | | | | | No functional change. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
| * PNP: reserve system board iomem resources as well as ioport resourcesBjorn Helgaas2007-01-26
| | | | | | | | | | | | | | | | Most x86 boxes have no iomem system board resources, but some ia64 boxes do. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
| * ACPI: move FADT resource reservations from motherboard driver to oslBjorn Helgaas2007-01-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Resources described by the FADT aren't really a good fit for the ACPI motherboard driver. The motherboard driver cares about PNP0C01 and PNP0C02 devices and their resources. The FADT describes some resources used by the ACPI core. Often, they are also described by by the _CRS of a motherboard device, but I think it's better to reserve them specifically in the ACPI osl.c because (a) the motherboard driver is optional and ACPI uses the resources even if the driver is absent, and (b) I want to remove the ACPI motherboard driver because it's mostly redundant with the PNP system.c driver. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
* | ACPI: bay: Convert ACPI Bay driver to be compatible with sysfs update.Zhang Rui2007-02-03
| | | | | | | | | | | | | | | | | | Set fake hid for ejectable drive bay. Match bay devices by checking the hid. Remove .match method of Bay driver. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* | Pull sysfs into test branchLen Brown2007-02-03
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: Documentation/feature-removal-schedule.txt include/acpi/acpi_drivers.h Signed-off-by: Len Brown <len.brown@intel.com>
| * | ACPI: correct id for fixed buttonsAlexey Starikovskiy2007-02-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | ACPI_BUTTON_HID_POWERF was changed, but this change was not propogated to button.c, thus breaking detection of fixed power and sleep buttons. Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
| * | ACPI: add ACPICA version in sysfsZhang Rui2007-01-28
| | | | | | | | | | | | | | | | | | | | | | | | Add an ACPI attribute to indicate ACPICA version. /proc/acpi/version is deprecated by /sys/module/acpi/parameters/acpica_version. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
| * | ACPI: add ACPI debug attribute in sysfsZhang Rui2007-01-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add ACPI debug attributes in sysfs. /proc/acpi/debug_layer && debug_level are deprecated by /sys/module/acpi/parameters/debug_layer && debug_level. NOTE: The operations to them are quite the same. E.g. if you want to enable ACPI_DB_INFO, ACPI_DB_WARN, ACPI_DB_ERROR and disable the others, #echo 0x13 >/sys/module/acpi/parameters/debug_level is OK, and a boot option "acpi.debug_level = 0x13" also works. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
| * | ACPI: add a Kconfig option for ACPI procfs interfaceZhang Rui2007-01-28
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | Add a kconfig option CONFIG_ACPI_PROCFS to make procfs interface a configurable attribute of ACPI. No procfs interface is actually deprecated, and no sysfs interface is added in this patch. CONGI_ACPI_PROCFS is used to mark procfs interface as deprecated once the same function is duplicated in sysfs. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
| * ACPI: use more understandable bus_id for ACPI devicesZhang Rui2007-01-05
| | | | | | | | | | | | | | | | | | | | | | | | Some of the ACPI devices use the internal fake hids which are exposed to userspace as devces' bus_id after sysfs conversion. To make it more friendly, we convert them to more understandable strings. For those devices w/o PNPids, we use "device:instance_no" as the bus_id instead of "PNPIDNON:instance_no". Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
| * ACPI: fix Supermicro X7DB8+ Boot regressionRui Zhang2006-12-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | http://bugzilla.kernel.org/show_bug.cgi?id=7695 Originally we converted bind/unbind to use a new pci bridge driver. The driver will add/remove _PRT, so we can eventually remove .bind/.unbind methods. But we found that some of the _ADR-Based devices don't have _PRT, i.e. they are not managed by the new ACPI PCI bridge driver. So that .bind method is not called for some _ADR-Based devices, which leads to a failure. Now we make ACPI PCI Root Bridge Driver scan and binds all _ADR-Based devices once the driver is loaded, in the .add method of ACPI PCI Root Bridge driver. Extra code path for calling .bind/.unbind when _ADR-Based devices are hot added/removed is also added. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
| * ACPI: use PNPID:instance_no as bus_id of ACPI deviceZhang Rui2006-12-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously we used the device name in the DSDT, but would crash upon encountering a duplicate. Also, exposing the DSDT device name to the user in a patch isn't a good idea, because it is arbitrary. After some discussion, we finally decided to use "PNPID:instance_no" as the bus_id of ACPI devices. Two attributes for each device are added at the same time, the full pathname in ACPI namespace and hardware_id if it has. NOTE: acpi_bus_id_list is used to keep the information of PNPID and instance number of the given PNPID. Loop the acpi_bus_id_list to find the instance_no of the same PNPID when register a device. If failed, i.e. we don't have a node with this PNPID, allocate one and link it to this list. NOTE: Now I don't take the memory free work in charge. If necessary, I can add a reference count in struct acpi_device_bus_id, and check the reference and when unregister a device, i.e. memory is freed when the reference count of a given PNPID is 0. Signed-off-by: Li Shaohua <shaohua.li@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
| * ACPI: Set fake hid for non-PNPID ACPI devicesZhang Rui2006-12-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | We do this mainly because: 1. hid is used to match ACPI devices and drivers. .match method which is incompatible to driver model can be deleted from acpi_driver.ops then. 2. As the .uevent method mark ACPI drivers by PNPID, fake hid is set to non-PNPID devices so that udev script can load the right ACPI driver by looking for "HWID = " or "COMPTID = ". Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
| * ACPI: Convert ACPI PCI .bind/.unbind to use PCI bridge driverLi Shaohua2006-12-15
| | | | | | | | | | | | | | | | | | | | | | | | acpi_device had a .bind/.unbind methods, but Linux driver model does not. Cut ACPI PCI code over to use the Linux driver model methods. Convert bind/unbind to use a new pci bridge driver. The driver will add/remove _PRT, so we can eventually remove .bind/.unbind methods. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
| * ACPI: consolidate two motherboard drivers into oneLi Shaohua2006-12-15
| | | | | | | | | | | | | | | | | | Consolidate motherboard1 and motherboard2 drivers into one so that driver core doesn't complain that two drivers have the same name. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
| * ACPI: add acpi_bus_removal_type in acpi_deviceLi Shaohua2006-12-15
| | | | | | | | | | | | | | | | | | | | | | Add removal_type in structure acpi_device for hot removal. ACPI_BUS_REMOVAL_EJECT is used for ACPI device hot removal. Only one parameter is allowed in .remove method due to driver model. So removal_type is added to indicate different removal type. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
| * ACPI: add acpi_bus_ops in acpi_deviceLi Shaohua2006-12-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add acpi_bus_ops in acpi_device to support acpi hot plug. NOTE: Two methods .add and .start in acpi_driver.ops are called separately to probe ACPI devices, while only .probe method is called in driver model. As executing .add and .start separately is critical for ACPI device hot plug, we use acpi_bus_ops to distinguish different code path. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
| * ACPI: convert to sysfs frameworkPatrick Mochel2006-12-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Setup new sysfs framework 1. Remove /sys/firmware/acpi 2. Add ACPI device in device tree. File "eject" for every device that has _EJ0 method is moved from /sys/firmware to /sys/devices. Operation on this file is exactly the same as before. i.e. echo 1 to "eject" will cause hot removal of this device. Corresponding changes should be made in userspace for hot removal. Signed-off-by: Li Shaohua <shaohua.li@intel.com> Signed-off-by: Zhang Rui<rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
| * ACPI: adjust init orderLi Shaohua2006-12-15
| | | | | | | | | | | | | | | | Adjust link order to add ACPI devices to global list before PCI devices. In addition, acpi_bus type must be initialized before any driver loads. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
| * ACPI: change registration interface to follow driver modelPatrick Mochel2006-12-15
| | | | | | | | | | | | | | | | | | ACPI device/driver registration Interfaces are modified to follow Linux driver model. Signed-off-by: Li Shaohua <shaohua.li@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
| * ACPI: add ACPI bus_type for driver modelPatrick Mochel2006-12-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add ACPI bus_type for Linux driver model. 1. .shutdown method is added into acpi_driver.ops needed by bus_type operations. 2. remove useless parameter 'int state' in .resume method. 3. change parameter 'int state' to 'pm_message_t state' in .suspend method. Note: The new .uevent method mark ACPI drivers by PNPID instead of by name. Udev script needs to look for "HWID=" or "COMPTID=" to load ACPI drivers as a result. Signed-off-by: Li Shaohua <shaohua.li@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
| * ACPI: add device_driver and hepler functionsPatrick Mochel2006-12-15
| | | | | | | | | | | | | | | | | | Add device_driver into acpi_driver for driver model. Add helper functions 'to_acpi_device' and 'to_acpi_driver' to get structure acpi_device/acpi_driver by device/device_driver. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
| * ACPI: rename some functionsZhang Rui2006-12-15
| | | | | | | | | | | | | | | | | | | | We want the name 'to_acpi_device'. And the current macro 'to_acpi_device' will be removed after device model is setup. So just simply rename them. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
| * ACPI: clean up scan.cZhang Rui2006-12-15
| | | | | | | | | | | | | | | | Adjust the code and make code doing similar things together. No logic changes. Signed-off-by : Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* | Pull bay into test branchLen Brown2007-02-03
|\ \
| * | ACPI: bay: new driver is EXPERIMENTALLen Brown2007-02-03
| | | | | | | | | | | | Signed-off-by: Len Brown <len.brown@intel.com>
| * | ACPI: bay: make drive_bays staticAdrian Bunk2007-02-03
| | | | | | | | | | | | | | | | | | Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
| * | ACPI: bay: make bay a platform driverKristen Carlson Accardi2007-02-03
| | | | | | | | | | | | | | | | | | | | | | | | Convert the bay driver to be a platform driver, so that we can have sysfs entries. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
| * | ACPI: bay: remove prototype procfs codeKristen Carlson Accardi2007-02-03
| | | | | | | | | | | | | | | | | | | | | Remove all the procfs related code. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
| * | ACPI: bay: delete unused variableLen Brown2007-02-03
| | | | | | | | | | | | | | | | | | | | | drivers/acpi/bay.c: In function ‘bay_notify’: drivers/acpi/bay.c:491: warning: unused variable ‘bay’ Signed-off-by: Len Brown <len.brown@intel.com>
| * | ACPI: bay: new driver adding removable drive bay supportKristen Carlson Accardi2007-02-03
| | | | | | | | | | | | | | | | | | Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
| * | ACPI: dock: check if parent is on dockKristen Carlson Accardi2007-02-03
| | | | | | | | | | | | | | | | | | | | | | | | When determining if a device is on a dock station, we should check the parent of the device as well. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* | | Pull acpica into test branchLen Brown2007-02-03
|\ \ \
| * | | ACPICA: fix gcc build warningsAlexey Starikovskiy2007-02-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/acpi/namespace/nsparse.c:126: warning: int format, different type arg (arg 7) drivers/acpi/tables/tbfadt.c:224: warning: unsigned int format, different type arg (arg 6) drivers/acpi/utilities/utdebug.c:184: warning: cast from pointer to integer of different size drivers/acpi/utilities/utdebug.c:184: warning: cast from pointer to integer of different size drivers/acpi/utilities/utdebug.c:197: warning: cast from pointer to integer of different size drivers/acpi/processor_idle.c:1093: warning: long long unsigned int format, u64 arg (arg 5) Signed-off-by: Len Brown <len.brown@intel.com>
| * | | Altix: Add ACPI SSDT PCI device support (hotplug)John Keller2007-02-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support for dynamic loading and unloading of ACPI SSDT tables upon slot hotplugs and unplugs. On SN platforms, we now represent every populated root bus slot with a single ACPI SSDT table containing info for every device and PPB attached to the slot. These SSDTs are generated by the prom at initial boot and hotplug time. The info in these SSDT tables is used by the SN kernel IO "fixup" code (which is called at boot and hotplug time). On hotplugs (i.e. enable_slot()), if running with an ACPI capable prom, attempt to obtain a new ACPI SSDT table for the slot being hotplugged. If successful, add the table to the ACPI namespace (acpi_load_table()) and then walk the new devices and add them to the ACPI infrastructure (acpi_bus_add()). On hot unplugs (i.e. disable_slot()), if running with an ACPI capable prom, attempt to remove the SSDT table associated with the slot from the ACPI namespace (acpi_unload_table_id()) and infastructure (acpi_bus_trim()). From: John Keller <jpk@sgi.com> A bug was fixed where the sgi hotplug driver was removing the slot's SSDT table from the ACPI namespace a bit too early in disable_slot(). Also, we now call acpi_bus_start() subsequent to acpi_bus_add(). Signed-off-by: Aaron Young <ayoung@sgi.com> Cc: Greg KH <greg@kroah.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown<len.brown@intel.com>
| * | | Altix: ACPI SSDT PCI device supportJohn Keller2007-02-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add SN platform support for running with an ACPI capable PROM that defines PCI devices in SSDT tables. There is a SSDT table for every occupied slot on a root bus, containing info for every PPB and/or device on the bus. The SSDTs will be dynamically loaded/unloaded at hotplug enable/disable. Platform specific information that is currently passed via a SAL call, will now be passed via the Vendor resource in the ACPI Device object(s) defined in each SSDT. Signed-off-by: John Keller <jpk@sgi.com> Cc: Greg KH <greg@kroah.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
| * | | ACPICA: reduce conflicts with Altix patch seriesLen Brown2007-02-02
| | | | | | | | | | | | | | | | | | | | | | | | Syntax only -- no functional changes. Signed-off-by: Len Brown <len.brown@intel.com>
| * | | ACPI_NUMA: fix HP IA64 simulator issue with extended memory domainAlexey Starikovskiy2007-02-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ACPI 3.0 incorporated the SRAT spec, upping the table version to 2, and extending the size of the proximity domain from 1-byte to 4-bytes. This extension was into a reserved field that firmware should set to 0, but the HP simulator had non-zero values there resulting in unexpected huge numbers. So mask the domain down to 8-bits for now. A more general fix will be to check the table version supplied by firmware and get paranoid about reserved fields. Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
| * | | ACPI: fix HP RX2600 IA64 bootAlexey Starikovskiy2007-02-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Copy space_id of GAS structure to newly created GAS. The previous FADT conversion code defaulted to IO space. Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
| * | | ACPI: build fix for IBM x440 - CONFIG_X86_SUMMITAlexey Starikovskiy2007-02-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | i386 srat.c broke due to re-names from ACPICA table-manager re-write. Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
| * | | ACPICA: Update version to 20070126Bob Moore2007-02-02
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
| * | | ACPICA: Fix for incorrect parameter passed to AcpiTbDeleteTable during table ↵Bob Moore2007-02-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | load. Bad pointer was passed in the case where the DSDT is overridden. Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
| * | | ACPICA: Update copyright to 2007.Bob Moore2007-02-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added 2007 copyright to all module headers and signons. This affects virtually every file in the ACPICA core subsystem, iASL compiler, and the utilities. Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
| * | | ACPICA: Allow processor to be declared with the Device() instead of Processor()Alexey Starikovskiy2007-02-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow processor to be declered with the Device(), such as: Device(CPU1234) { Name(_HID, "ACPI007") Name(_UID, 1234) } Signed-off-by: Len Brown <len.brown@intel.com>
| * | | ACPICA: Allow ACPI id to be u32 instead of u8.Alexey Starikovskiy2007-02-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow ACPI id to be u32 instead of u8. Requires drop of conversion tables with the acpiid as index. Signed-off-by: Len Brown <len.brown@intel.com>
| * | | ACPICA: Update version to 20061215Bob Moore2007-02-02
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
generated by cgit v1.2.2 (git 2.25.0) at 2025-01-17 06:38:47 -0500