aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
* [PATCH] x86-64: Fix race in exit_idleAndi Kleen2006-11-14
| | | | | | | | | | | | When another interrupt happens in exit_idle the exit idle notifier could be called an incorrect number of times. Add a test_and_clear_bit_pda and use it handle the bit atomically against interrupts to avoid this. Pointed out by Stephane Eranian Signed-off-by: Andi Kleen <ak@suse.de>
* [PATCH] x86-64: Fix vgetcpu when CONFIG_HOTPLUG_CPU is disabledAndi Kleen2006-11-14
| | | | | | | | | | | | | | | | | The vgetcpu per CPU initialization previously relied on CPU hotplug events for all CPUs to initialize the per CPU state. That only worked only on kernels with CONFIG_HOTPLUG_CPU enabled. On the others some CPUs didn't get their state initialized properly and vgetcpu wouldn't work. Change the initialization sequence to instead run in a normal initcall (which runs after the normal CPU bootup) and initialize all running CPUs there. Later hotplug CPUs are still handled with an hotplug notifier. This actually simplifies the code somewhat. Signed-off-by: Andi Kleen <ak@suse.de>
* [PATCH] x86: Add acpi_user_timer_override option for Asus boardsAndi Kleen2006-11-14
| | | | | | | | | | | | | | | Timer overrides are normally disabled on Nvidia board because they are commonly wrong, except on new ones with HPET support. Unfortunately there are quite some Asus boards around that don't have HPET, but need a timer override. We don't know yet how to handle this transparently, but at least add a command line option to force the timer override and let them boot. Cc: len.brown@intel.com Signed-off-by: Andi Kleen <ak@suse.de>
* [PATCH] x86-64: setup saved_max_pfn correctly (kdump)Magnus Damm2006-11-14
| | | | | | | | | | | | | | | | | | | x86_64: setup saved_max_pfn correctly 2.6.19-rc4 has broken CONFIG_CRASH_DUMP support on x86_64. It is impossible to read out the kernel contents from /proc/vmcore because saved_max_pfn is set to zero instead of the max_pfn value before the user map is setup. This happens because saved_max_pfn is initialized at parse_early_param() time, and at this time no active regions have been registered. save_max_pfn is setup from e820_end_of_ram(), more exact find_max_pfn_with_active_regions() which returns 0 because no regions exist. This patch fixes this by registering before and removing after the call to e820_end_of_ram(). Signed-off-by: Magnus Damm <magnus@valinux.co.jp> Signed-off-by: Andi Kleen <ak@suse.de>
* [PATCH] x86-64: Handle reserve_bootmem_generic beyond end_pfnAndi Kleen2006-11-14
| | | | | | | | | | | This can happen on kexec kernels with some configurations, in particularly on Unisys ES7000 systems. Analysis by Amul Shah Cc: Amul Shah <amul.shah@unisys.com> Signed-off-by: Andi Kleen <ak@suse.de>
* [PATCH] x86-64: shorten the x86_64 boot setup GDT to what the comment saysSteven Rostedt2006-11-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | Stephen Tweedie, Herbert Xu, and myself have been struggling with a very nasty bug in Xen. But it also pointed out a small bug in the x86_64 kernel boot setup. The GDT limit being setup by the initial bzImage code when entering into protected mode is way too big. The comment by the code states that the size of the GDT is 2048, but the actual size being set up is much bigger (32768). This happens simply because of one extra '0'. Instead of setting up a 0x800 size, 0x8000 is set up. On bare metal this is fine because the CPU wont load any segments unless they are explicitly used. But unfortunately, this breaks Xen on vmx FV, since it (for now) blindly loads all the segments into the VMCS if they are less than the gdt limit. Since the real mode segments are around 0x3000, we are getting junk into the VMCS and that later causes an exception. Stephen Tweedie has written up a patch to fix the Xen side and will be submitting that to those folks. But that doesn't excuse the GDT limit being a magnitude too big. AK: changed to compute true gdt size in assembler, fixed comment Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andi Kleen <ak@suse.de>
* [PATCH] x86-64: Fix PTRACE_[SG]ET_THREAD_AREA regression with ia32 emulation.Andi Kleen2006-11-14
| | | | | | | | | | | ptrace(PTRACE_[SG]ET_THREAD_AREA) calls from ia32 code should be passed onto the x86_64 implementation. The default case in sys32_ptrace used to call to sys_ptrace(), but is now EINVAL. This patch fixes a regression caused by that changed. Signed-off-by: Mike McCormack <mike@codeweavers.com> Signed-off-by: Andi Kleen <ak@suse.de>
* [PATCH] x86-64: Fix partial page check to ensure unusable memory is not ↵Aaron Durbin2006-11-14
| | | | | | | | | | | being marked usable. Fix partial page check in e820_register_active_regions to ensure partial pages are not being marked as active in the memory pool. Signed-off-by: Aaron Durbin <adurbin@google.com> Signed-off-by: Andi Kleen <ak@suse.de>
* Revert "[PATCH] MMCONFIG and new Intel motherboards"Andi Kleen2006-11-14
| | | | | | | This reverts 4c6e052adfe285ede5884e4e8c4d33af33932c13 commit. Following Linus' i386 change: revert resource reservation for mmcfg config now. Will be revisited in .20 hopefully.
* Merge branch 'for-linus' of ↵Linus Torvalds2006-11-13
|\ | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: MMC: Do not set unsupported bits in OCR response MMC: Poll card status after rescanning cards
| * MMC: Do not set unsupported bits in OCR responseTimo Teras2006-11-09
| | | | | | | | | | | | | | | | The card might go to inactive state (according to specification), if there are unsupported bits set in the OCR. Signed-off-by: Timo Teras <timo.teras@solidboot.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
| * MMC: Poll card status after rescanning cardsTimo Teras2006-11-09
| | | | | | | | | | | | | | | | | | | | | | | | Some broken cards seem to process CMD1 even in stand-by state. The result is that the card replies with ILLEGAL_COMMAND error for the next command sent after rescanning. Currently the next command is select card, which would return the error. But CMD7 does actually succeed and retries of the command will timeout. The workaround is to poll card status after CMD1 to clear the pending error. Signed-off-by: Timo Teras <timo.teras@solidboot.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
* | Merge branch 'for-linus' of ↵Linus Torvalds2006-11-13
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/mad: Fix race between cancel and receive completion RDMA/amso1100: Fix && typo RDMA/amso1100: Fix unitialized pseudo_netdev accessed in c2_register_device IB/ehca: Activate scaling code by default IB/ehca: Use named constant for max mtu IB/ehca: Assure 4K alignment for firmware control blocks
| * | IB/mad: Fix race between cancel and receive completionRoland Dreier2006-11-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When ib_cancel_mad() is called, it puts the canceled send on a list and schedules a "flushed" callback from process context. However, this leaves a window where a receive completion could be processed before the send is fully flushed. This is fine, except that ib_find_send_mad() will find the MAD and return it to the receive processing, which results in the sender getting both a successful receive and a "flushed" send completion for the same request. Understandably, this confuses the sender, which is expecting only one of these two callbacks, and leads to grief such as a use-after-free in IPoIB. Fix this by changing ib_find_send_mad() to return a send struct only if the status is still successful (and not "flushed"). The search of the send_list already had this check, so this patch just adds the same check to the search of the wait_list. Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * | RDMA/amso1100: Fix && typoJean Delvare2006-11-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the AMSO1100 firmware version computation, which was broken due to "&&" being used where "&" should have. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * | RDMA/amso1100: Fix unitialized pseudo_netdev accessed in c2_register_deviceTom Tucker2006-11-13
| | | | | | | | | | | | | | | | | | | | | | | | Rework some load-time error handling: c2_register_device() leaked when it failed, and the function that called it didn't check the return code. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * | IB/ehca: Activate scaling code by defaultHoang-Nam Nguyen2006-11-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change ehca's Kconfig to activates scaling code as default. After several measurements we saw that this feature prevents dropped packets (UD) in stress situation. Thus, enabling it helps to improve ehca's bandwidth through IPoIB. Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * | IB/ehca: Use named constant for max mtuHoang-Nam Nguyen2006-11-13
| | | | | | | | | | | | | | | | | | | | | Define and use a constant EHCA_MAX_MTU instead hardcoded value. Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * | IB/ehca: Assure 4K alignment for firmware control blocksHoang-Nam Nguyen2006-11-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Assure 4K alignment for firmware control blocks in 64K page mode, because kzalloc()'s result address might not be 4K aligned if 64K pages are enabled. Thus, we introduce wrappers called ehca_{alloc,free}_fw_ctrlblock(), which use a slab cache for objects with 4K length and 4K alignment in order to alloc/free firmware control blocks in 64K page mode. In 4K page mode those wrappers just are defines of get_zeroed_page() and free_page(). Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* | | [dvb saa7134] Fix missing 'break' for avermedia card caseLinus Torvalds2006-11-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 450efcfd2e1d941e302a8c89322fbfcef237be98 broke Avermedia 777 support. Added obvious missing "break" statement. Cc: José Suárez <j.suarez.agapito@gmail.com> Cc: Michael Krufky <mkrufky@linuxtv.org> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | [PATCH] ide-cd: only set rq->errors SCSI style for block pc requestsJens Axboe2006-11-13
| | | | | | | | | | | | | | | | | | | | | | | | We should only set ->errors to CHECK_CONDITION and so on for requests that use this field in the SCSI manner. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | [PATCH] Fix bad data direction in SG_IOJens Axboe2006-11-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Contrary to what the name misleads you to believe, SG_DXFER_TO_FROM_DEV is really just a normal read seen from the device side. This patch fixes http://lkml.org/lkml/2006/10/13/100 Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | Merge branch 'master' of ↵Linus Torvalds2006-11-13
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb: V4L/DVB (4818): Flexcop-usb: fix debug printk V4L/DVB (4817): Fix uses of "&&" where "&" was intended V4L/DVB (4816): Change tuner type for Avermedia A16AR V4L/DVB (4815): Remote support for Avermedia A16AR V4L/DVB (4814): Remote support for Avermedia 777 V4L/DVB (4804): Fix missing i2c dependency for saa7110 V4L/DVB (4802): Cx88: fix remote control on WinFast 2000XP Expert V4L/DVB (4795): Tda826x: use correct max frequency
| * | | V4L/DVB (4818): Flexcop-usb: fix debug printkAlexey Dobriyan2006-11-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | .. fix debug printk. Why, oh why, one would want to do (u16 & 0xff) << 8 and print it with %02x format? Acked-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
| * | | V4L/DVB (4817): Fix uses of "&&" where "&" was intendedJean Delvare2006-11-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix uses of "&&" where "&" was intended in bttv-cards.c and tveeprom.c Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
| * | | V4L/DVB (4816): Change tuner type for Avermedia A16ARpasky@ucw.cz2006-11-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This changes it from TDA8290 which is allegedly very unlikely to TD1316 which is allegedly very likely. I didn't get it to work with either, but expected that this got applied when Mauro sent it to me, so here it goes again; feel free to drop it to the floor. :-) Signed-off-by: Petr Baudis <pasky@ucw.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
| * | | V4L/DVB (4815): Remote support for Avermedia A16ARpasky@ucw.cz2006-11-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The remote as well as the GPIO interface is the same as what comes with 777. For an example of mplayer lirc configuration, see http://pasky.or.cz/~pasky/dev/v4l/lircrc Signed-off-by: Petr Baudis <pasky@ucw.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
| * | | V4L/DVB (4814): Remote support for Avermedia 777pasky@ucw.cz2006-11-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I didn't test it personally since I don't have this card, but A16AR uses the same interface and that one certainly does work perfectly (see the next patch). This patch was originally sent in http://marc.theaimsgroup.com/?l=linux-video&m=114743413825375&w=2 https://www.redhat.com/mailman/private/video4linux-list/2006-May/msg00103.html but never got applied. This version has some trivial modifications and drops the weird gpio hack (it's not clear what practical purpose does it serve). Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net> Signed-off-by: Petr Baudis <pasky@ucw.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
| * | | V4L/DVB (4804): Fix missing i2c dependency for saa7110Mauro Carvalho Chehab2006-11-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/media/video/saa7110.c:112: undefined reference to `i2c_master_send' drivers/built-in.o: In function `saa7110_read': drivers/media/video/saa7110.c:130: undefined reference to `i2c_smbus_read_byte' drivers/media/video/saa7110.c:130: undefined reference to `i2c_smbus_read_byte' Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
| * | | V4L/DVB (4802): Cx88: fix remote control on WinFast 2000XP ExpertHermann Pitton2006-11-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | fix remote control on WinFast 2000XP Expert by setting timing back to 1 ms, like it was in the original patch by Robert Reid. Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
| * | | V4L/DVB (4795): Tda826x: use correct max frequencyAlexey Dobriyan2006-11-13
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | sparse "defined twice" warning Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* | | Merge branch 'merge' of ↵Linus Torvalds2006-11-13
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] cell: set ARCH_SPARSEMEM_DEFAULT in Kconfig [POWERPC] Fix cell "new style" mapping and add debug [POWERPC] pseries: Force 4k update_flash block and list sizes [POWERPC] CPM_UART: Fix non-console initialisation [POWERPC] CPM_UART: Fix non-console transmit [POWERPC] Make sure initrd and dtb sections get into zImage correctly
| * | | [POWERPC] cell: set ARCH_SPARSEMEM_DEFAULT in KconfigGeoff Levand2006-11-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current cell processor support needs sparsemem, so set it as the default memory model. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | [POWERPC] Fix cell "new style" mapping and add debugBenjamin Herrenschmidt2006-11-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes a typo in the "new style" code for mapping SPE resources, which causes it to try to map the same resource 4 times. It also adds some pr_debug's that are useful to track down issues with the firmware when bringinh up new machines. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | [POWERPC] pseries: Force 4k update_flash block and list sizesJohn Rose2006-11-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The enablement of 64k pages on pseries platforms exposed a bug in the RTAS mechanism for updating firmware. RTAS assumes 4k for flash block and list sizes, and use of any other sizes results in a failure, even though PAPR does not specify any such requirement. This patch changes the rtas_flash module to force the use of 4k memory block and list sizes when preparing and sending a firmware image to RTAS. The rtas_flash function now uses a slab cache of 4k blocks with 4k alignment, rather than get_zeroed_page(), to allocate the memory for the flash blocks and lists. The 4k alignment requirement is specified in PAPR. Signed-off-by: John Rose <johnrose@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | [POWERPC] CPM_UART: Fix non-console initialisationKalle Pokki2006-11-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The cpm_uart driver is initialised incorrectly, if there is a frame buffer console, and CONFIG_SERIAL_CPM_CONSOLE is defined. The driver fails to call cpm_uart_init_portdesc() and set_lineif() in this case. Signed-off-by: Kalle Pokki <kalle.pokki@iki.fi> Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | [POWERPC] CPM_UART: Fix non-console transmitKalle Pokki2006-11-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SMC and SCC hardware transmitter is enabled at the wrong place. Simply writing twice to the non-console port, like $ echo asdf > /dev/ttyCPM1 $ echo asdf > /dev/ttyCPM1 puts the shell into endless uninterruptible sleep, since the transmitter is stopped after the first write, and is not enabled before the shutdown function of the second write. Thus the transmit buffers are never emptied. Signed-off-by: Kalle Pokki <kalle.pokki@iki.fi> Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | [POWERPC] Make sure initrd and dtb sections get into zImage correctlyPaul Mackerras2006-11-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The "wrapper" script was using the wrong names for the initrd and dtb (device-tree blob) sections. This fixes it, and also ensures the symbols for the start and end of the dtb get defined correctly. Signed-off-by: Paul Mackerras <paulus@samba.org>
* | | | Merge git://oss.sgi.com:8090/xfs/xfs-2.6Linus Torvalds2006-11-13
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://oss.sgi.com:8090/xfs/xfs-2.6: [XFS] Remove KERNEL_VERSION macros from xfs_dmapi.h [XFS] Prevent a deadlock when xfslogd unpins inodes. [XFS] Clean up i_flags and i_flags_lock handling. [XFS] 956664: dm_read_invis() changes i_atime [XFS] rename uio_read() to xfs_uio_read() [XFS] Keep lockdep happy. [XFS] 956618: Linux crashes on boot with XFS-DMAPI filesystem when
| * | | | [XFS] Remove KERNEL_VERSION macros from xfs_dmapi.hDavid Chinner2006-11-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SGI-PV: 957005 SGI-Modid: xfs-linux-melb:xfs-kern:27398a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
| * | | | [XFS] Prevent a deadlock when xfslogd unpins inodes.David Chinner2006-11-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The previous fixes for the use after free in xfs_iunpin left a nasty log deadlock when xfslogd unpinned the inode and dropped the last reference to the inode. the ->clear_inode() method can issue transactions, and if the log was full, the transaction could push on the log and get stuck trying to push the inode it was currently unpinning. To fix this, we provide xfs_iunpin a guarantee that it will always have a valid xfs_inode <-> linux inode link or a particular flag will be set on the inode. We then use log forces during lookup to ensure transactions are completed before we recycle the inode. This ensures that xfs_iunpin will never use the linux inode after it is being freed, and any lookup on an inode on the reclaim list will wait until it is safe to attach a new linux inode to the xfs inode. SGI-PV: 956832 SGI-Modid: xfs-linux-melb:xfs-kern:27359a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Shailendra Tripathi <stripathi@agami.com> Signed-off-by: Takenori Nagano <t-nagano@ah.jp.nec.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
| * | | | [XFS] Clean up i_flags and i_flags_lock handling.David Chinner2006-11-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SGI-PV: 956832 SGI-Modid: xfs-linux-melb:xfs-kern:27358a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Nathan Scott <nscott@aconex.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
| * | | | [XFS] 956664: dm_read_invis() changes i_atimeVlad Apostolov2006-11-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SGI-PV: 956664 SGI-Modid: xfs-linux-melb:xfs-kern:27315a Signed-off-by: Vlad Apostolov <vapo@sgi.com> Signed-off-by: Sam Vaughan <sjv@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
| * | | | [XFS] rename uio_read() to xfs_uio_read()Vlad Apostolov2006-11-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SGI-PV: 957004 SGI-Modid: xfs-linux-melb:xfs-kern:27231a Signed-off-by: Vlad Apostolov <vapo@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
| * | | | [XFS] Keep lockdep happy.Tim Shimmin2006-11-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SGI-PV: 956964 SGI-Modid: xfs-linux-melb:xfs-kern:27200a Signed-off-by: Tim Shimmin <tes@sgi.com> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
| * | | | [XFS] 956618: Linux crashes on boot with XFS-DMAPI filesystem whenVlad Apostolov2006-11-11
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_XFS_TRACE is on SGI-PV: 956618 SGI-Modid: xfs-linux-melb:xfs-kern:27196a Signed-off-by: Vlad Apostolov <vapo@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
* | | | Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2006-11-13
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [IPVS]: More endianness fixed. [IPVS]: Compile fix for annotations in userland.
| * | | | [IPVS]: More endianness fixed.Julian Anastasov2006-11-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - make sure port in FTP data is in network order (in fact it was looking buggy for big endian boxes before Viro's changes) - htonl -> htons for port Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | [IPVS]: Compile fix for annotations in userland.Simon Horman2006-11-09
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change makes __beXX available to user-space applications, such as ipvsadm, which include ip_vs.h Signed-Off-By: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | Merge master.kernel.org:/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds2006-11-13
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/sfrench/cifs-2.6: [CIFS] Fix minor problem with previous patch [CIFS] Fix mount failure when domain not specified [CIFS] Explicitly set stat->blksize [CIFS] NFS stress test generates flood of "close with pending write" messages
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-25 11:22:59 -0500