aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
* [PATCH] ep93xx_eth: fix unlikely(x) > y testLennert Buytenhek2006-10-31
| | | | | | | Fix unlikely(x) > y test in ep93xx_eth. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] ep93xx_eth: fix RX/TXstatus ring full handlingLennert Buytenhek2006-10-31
| | | | | | | | | | | | | | | | | | Ray Lehtiniemi reported that an incoming UDP packet flood can lock up the ep93xx ethernet driver. Herbert Valerio Riedel noted that due to the way ep93xx_eth manages the RX/TXstatus rings, it cannot distinguish a full ring from an empty one, and correctly suggested that this was likely to be causing this lockup to occur. Instead of looking at the hardware's RX/TXstatus ring write pointers to determine when to stop reading from those rings, we should just check every individual RX/TXstatus descriptor's valid bit instead, since there is no other way to distinguish an empty ring from a full ring, and if there is a descriptor waiting, we take the hit of reading the descriptor from memory anyway. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Merge branch 'release' of ↵Linus Torvalds2006-10-31
|\ | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of master.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Correct definition of handle_IPI [IA64] move SAL_CACHE_FLUSH check later in boot [IA64] MCA recovery: Montecito support [IA64] cpu-hotplug: Fixing confliction between CPU hot-add and IPI [IA64] don't double >> PAGE_SHIFT pointer for /dev/kmem access
| * [IA64] Correct definition of handle_IPIKeith Owens2006-10-31
| | | | | | | | | | | | | | | | | | The declaration of handle_IPI in arch/ia64/kernel/smp.c was changed but not the definition of this function. Remove struct pt_regs from handle_IPI(). Signed-off-by: Keith Owens <kaos@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * [IA64] move SAL_CACHE_FLUSH check later in bootTroy Heber2006-10-31
| | | | | | | | | | | | | | | | | | | | | | The check to see if the firmware drops interrupts during a SAL_CACHE_FLUSH is done to early in the boot. SAL_CACHE_FLUSH expects to be able to make PAL calls in virtual mode, on some cell based machines a fault occurs causing a MCA. This patch moves the check after mmu_context_init so the TLB and VHPT are properly setup. Signed-off-by Troy Heber <troy.heber@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * [IA64] MCA recovery: Montecito supportRuss Anderson2006-10-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The information in MCA records is filled in slightly differently on Montecito than on Madison/McKinley. Usually, the cache check and bus check target identifiers have the same address. On Montecito the cache check and bus check target identifiers can be different if a corrected error (ie SBE or unconsumed poison data) was encountered and then an uncorrected error (ie DBE) was consumed. In that case, the cache check target identifier is the physical address of the DBE (that caused the MCA to surface) while the bus check target identifier is the physical address of the SBE. This patch correctly finds the target identifier that triggered the MCA. If there are multiple valid cache target identifiers in the same error record then use the one with the lowest cache level. Signed-off-by: Russ Anderson (rja@sgi.com) Signed-off-by: Tony Luck <tony.luck@intel.com>
| * [IA64] cpu-hotplug: Fixing confliction between CPU hot-add and IPIKenji Kaneshige2006-10-31
| | | | | | | | | | | | | | Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * [IA64] don't double >> PAGE_SHIFT pointer for /dev/kmem accessJes Sorensen2006-10-26
| | | | | | | | | | | | | | | | | | | | Don't PAGE_SHIFT pointer before handing it to virt_to_page() in xlate_dev_kmem_ptr() as it results in a double shift. Spotted by Bob Montgomery. Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
* | [MIPS] Fixup migration to GENERIC_TIMEAtsushi Nemoto2006-10-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since we already moved to GENERIC_TIME, we should implement alternatives of old do_gettimeoffset routines to get sub-jiffies resolution from gettimeofday(). This patch includes: * MIPS clocksource support (based on works by Manish Lachwani). * remove unused gettimeoffset routines and related codes. * remove unised 64bit do_div64_32(). * simplify mips_hpt_init. (no argument needed, __init tag) * simplify c0_hpt_timer_init. (no need to write to c0_count) * remove some hpt_init routines. * mips_hpt_mask variable to specify bitmask of hpt value. * convert jmr3927_do_gettimeoffset to jmr3927_hpt_read. * convert ip27_do_gettimeoffset to ip27_hpt_read. * convert bcm1480_do_gettimeoffset to bcm1480_hpt_read. * simplify sb1250 hpt functions. (no need to subtract and shift) Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | [MIPS] VSMP: Synchronize cp0 counters on bootup.Ralf Baechle2006-10-31
| | | | | | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | [MIPS] Flags must be unsigned long.Ralf Baechle2006-10-31
| | | | | | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | [MIPS] VSMP: Fix initialization ordering bug.Ralf Baechle2006-10-31
| | | | | | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | [MIPS] Fix warning of printk format in mips_srs_init()Yoichi Yuasa2006-10-31
| | | | | | | | | | | | | | arch/mips/kernel/traps.c:1115: warning: int format, long unsigned int arg (arg 2) Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | [MIPS] Yosemite: fix uninitialized variable in titan_i2c_xfer()Yoichi Yuasa2006-10-31
| | | | | | | | | | Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | [MIPS] Sort out missuse of __init for prom_getcmdline()Ralf Baechle2006-10-31
| | | | | | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | [MIPS] Add missing file for support of backplane on TX4927 based boardManish Lachwani2006-10-31
| | | | | | | | | | Signed-off-by: Manish Lachwani <mlachwani@mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | [MIPS] TX4927: Remove indent error message that somehow ended in the code.Ralf Baechle2006-10-31
| | | | | | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | [PATCH] SCSI: ISCSI build failureRandy Dunlap2006-10-31
| | | | | | | | | | | | | | | | SCSI_QLA_ISCSI needs to depend on NET to prevent build (link) failures that are caused by selecting SCSI_ISCSI_ATTRS. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] CFQ: request <-> request merging rr_list fixupJens Axboe2006-10-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | In very rare circumstances would we be pruning a merged request and at the same time delete the implicated cfqq from the rr_list, and not readd it when the merged request got added. This could cause io stalls until that process issued io again. Fix it up by putting the rr_list add handling into cfq_add_rq_rb(), identical to how pruning is handled in cfq_del_rq_rb(). This fixes a hang reproducible with fsx-linux. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds2006-10-31
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Titan defconfig update. sh: Fix IPR-IRQ's for IRQ-chip change breakage. sh: Update r7780rp_defconfig. video: Fix include in hp680_bl. sh: Wire up new syscalls.
| * | sh: Titan defconfig update.Jamie Lenehan2006-10-30
| | | | | | | | | | | | | | | | | | | | | Small defconfig update for titan for 2.6.19-rc3, adding SH-RTC. Signed-off-by: Jamie Lenehan <lenehan@twibble.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | sh: Fix IPR-IRQ's for IRQ-chip change breakage.Jamie Lenehan2006-10-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The conversion from IPR-IRQ to IRQ-chip resulted in the ipr data being allocated in a local variable in make_ipr_irq - breaking anything using IPR interrupts. This changes all of the callers of make_ipr_irq to allocate a static structure containing the IPR data which is then passed to make_ipr_irq. This removes the need for make_ipr_irq to allocate any additional space for the IPR information. Signed-off-by: Jamie Lenehan <lenehan@twibble.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | sh: Update r7780rp_defconfig.Paul Mundt2006-10-30
| | | | | | | | | | | | | | | | | | Small defconfig updates for R7780RP, enabling SH-RTC. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | video: Fix include in hp680_bl.Kristoffer Ericson2006-10-30
| | | | | | | | | | | | | | | | | | | | | | | | The hp6xx.h header moved location, causing the build to fail, fix it up. Signed-off-by: Kristoffer Ericson <kristoffer_e1@hotmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | sh: Wire up new syscalls.Paul Mundt2006-10-30
| | | | | | | | | | | | | | | | | | This wires up sys_move_pages, sys_getcpu, and sys_epoll_pwait. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* | | Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2006-10-31
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [IPV6]: fix flowlabel seqfile handling [IPV6]: return EINVAL for invalid address with flowlabel lease request [SCTP]: Remove temporary associations from backlog and hash. [SCTP]: Correctly set IP id for SCTP traffic [NetLabel]: protect the CIPSOv4 socket option from setsockopt() [NETFILTER]: ip_tables: compat code module refcounting fix [NETFILTER]: nf_conntrack: add missing unlock in get_next_corpse() [NETFILTER]: ip_tables: compat error way cleanup [NETFILTER]: Missed and reordered checks in {arp,ip,ip6}_tables [NETFILTER]: remove masq/NAT from ip6tables Kconfig help [IPV6]: fix lockup via /proc/net/ip6_flowlabel [NET]: fix uaccess handling [SCTP]: Always linearise packet on input [ETH1394]: Fix unaligned accesses. [DCCP]: fix printk format warnings [NET]: Fix segmentation of linear packets [XFRM] xfrm_user: Fix unaligned accesses. [APPLETALK]: Fix potential OOPS in atalk_sendmsg(). [NET] sealevel: uses arp_broken_ops
| * | | [IPV6]: fix flowlabel seqfile handlingJames Morris2006-10-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There's a bug in the seqfile show operation for flowlabel objects, where each hash chain is traversed cumulatively for each element. The following function is called for each element of each chain: static void ip6fl_fl_seq_show(struct seq_file *seq, struct ip6_flowlabel *fl) { while(fl) { seq_printf... fl = fl->next; } } Thus, objects can appear mutliple times when reading /proc/net/ip6_flowlabel, as the above is called for each element in the chain. The solution is to remove the while() loop from the above, and traverse each chain exactly once, per the patch below. This also removes the ip6fl_fl_seq_show() function, which does nothing else. Signed-off-by: James Morris <jmorris@namei.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | [IPV6]: return EINVAL for invalid address with flowlabel lease requestJames Morris2006-10-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, when an application requests a lease for a flowlabel via the IPV6_FLOWLABEL_MGR socket option, no error is returned if an invalid type of destination address is supplied as part of the request, leading to a silent failure. This patch ensures that EINVAL is returned to the application in this case. Signed-off-by: James Morris <jmorris@namei.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | [SCTP]: Remove temporary associations from backlog and hash.Vlad Yasevich2006-10-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Every time SCTP creates a temporary association, the stack hashes it, puts it on a list of endpoint associations and increments the backlog. However, the lifetime of a temporary association is the processing time of a current packet and it's destroyed after that. In fact, we don't really want anyone else finding this association. There is no reason to do this extra work. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | [SCTP]: Correctly set IP id for SCTP trafficVlad Yasevich2006-10-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make SCTP 1-1 style and peeled-off associations behave like TCP when setting IP id. In both cases, we set the inet_sk(sk)->daddr and initialize inet_sk(sk)->id to a random value. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | [NetLabel]: protect the CIPSOv4 socket option from setsockopt()Paul Moore2006-10-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes two changes to protect applications from either removing or tampering with the CIPSOv4 IP option on a socket. The first is the requirement that applications have the CAP_NET_RAW capability to set an IPOPT_CIPSO option on a socket; this prevents untrusted applications from setting their own CIPSOv4 security attributes on the packets they send. The second change is to SELinux and it prevents applications from setting any IPv4 options when there is an IPOPT_CIPSO option already present on the socket; this prevents applications from removing CIPSOv4 security attributes from the packets they send. Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: James Morris <jmorris@namei.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | [NETFILTER]: ip_tables: compat code module refcounting fixDmitry Mishin2006-10-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes bug in iptables modules refcounting on compat error way. As we are getting modules in check_compat_entry_size_and_hooks(), in case of later error, we should put them all in translate_compat_table(), not in the compat_copy_entry_from_user() or compat_copy_match_from_user(), as it is now. Signed-off-by: Dmitry Mishin <dim@openvz.org> Acked-by: Vasily Averin <vvs@openvz.org> Acked-by: Kirill Korotaev <dev@openvz.org> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | [NETFILTER]: nf_conntrack: add missing unlock in get_next_corpse()Martin Josefsson2006-10-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add missing unlock in get_next_corpse() in nf_conntrack. It was missed during the removal of listhelp.h . Also remove an unneeded use of nf_ct_tuplehash_to_ctrack() in the same function. Should be applied before 2.6.19 is released. Signed-off-by: Martin Josefsson <gandalf@wlug.westbo.se> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | [NETFILTER]: ip_tables: compat error way cleanupVasily Averin2006-10-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds forgotten compat_flush_offset() call to error way of translate_compat_table(). May lead to table corruption on the next compat_do_replace(). Signed-off-by: Vasily Averin <vvs@openvz.org> Acked-by: Dmitry Mishin <dim@openvz.org> Acked-by: Kirill Korotaev <dev@openvz.org> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | [NETFILTER]: Missed and reordered checks in {arp,ip,ip6}_tablesDmitry Mishin2006-10-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a number of issues in parsing user-provided table in translate_table(). Malicious user with CAP_NET_ADMIN may crash system by passing special-crafted table to the *_tables. The first issue is that mark_source_chains() function is called before entry content checks. In case of standard target, mark_source_chains() function uses t->verdict field in order to determine new position. But the check, that this field leads no further, than the table end, is in check_entry(), which is called later, than mark_source_chains(). The second issue, that there is no check that target_offset points inside entry. If so, *_ITERATE_MATCH macro will follow further, than the entry ends. As a result, we'll have oops or memory disclosure. And the third issue, that there is no check that the target is completely inside entry. Results are the same, as in previous issue. Signed-off-by: Dmitry Mishin <dim@openvz.org> Acked-by: Kirill Korotaev <dev@openvz.org> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | [NETFILTER]: remove masq/NAT from ip6tables Kconfig helpPatrick McHardy2006-10-30
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | [IPV6]: fix lockup via /proc/net/ip6_flowlabelJames Morris2006-10-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There's a bug in the seqfile handling for /proc/net/ip6_flowlabel, where, after finding a flowlabel, the code will loop forever not finding any further flowlabels, first traversing the rest of the hash bucket then just looping. This patch fixes the problem by breaking after the hash bucket has been traversed. Note that this bug can cause lockups and oopses, and is trivially invoked by an unpriveleged user. Signed-off-by: James Morris <jmorris@namei.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | [NET]: fix uaccess handlingHeiko Carstens2006-10-30
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | [SCTP]: Always linearise packet on inputHerbert Xu2006-10-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I was looking at a RHEL5 bug report involving Xen and SCTP (https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=212550). It turns out that SCTP wasn't written to handle skb fragments at all. The absence of any calls to skb_may_pull is testament to that. It just so happens that Xen creates fragmented packets more often than other scenarios (header & data split when going from domU to dom0). That's what caused this bug to show up. Until someone has the time sits down and audits the entire net/sctp directory, here is a conservative and safe solution that simply linearises all packets on input. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | [ETH1394]: Fix unaligned accesses.David S. Miller2006-10-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Several u64 objects are derefernced in situations where the pointer is not guarenteed to be aligned correctly. Use get_unaligned() as needed. Thanks to Will Simoneau for lots of testing and debugging help. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * | | [DCCP]: fix printk format warningsRandy Dunlap2006-10-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix printk format warnings: build2.out:net/dccp/ccids/ccid2.c:355: warning: long long unsigned int format, u64 arg (arg 3) build2.out:net/dccp/ccids/ccid2.c:360: warning: long long unsigned int format, u64 arg (arg 3) build2.out:net/dccp/ccids/ccid2.c:482: warning: long long unsigned int format, u64 arg (arg 5) build2.out:net/dccp/ccids/ccid2.c:639: warning: long long unsigned int format, u64 arg (arg 3) build2.out:net/dccp/ccids/ccid2.c:639: warning: long long unsigned int format, u64 arg (arg 4) build2.out:net/dccp/ccids/ccid2.c:674: warning: long long unsigned int format, u64 arg (arg 3) build2.out:net/dccp/ccids/ccid2.c:720: warning: long long unsigned int format, u64 arg (arg 3) Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | [NET]: Fix segmentation of linear packetsHerbert Xu2006-10-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | skb_segment fails to segment linear packets correctly because it tries to write all linear parts of the original skb into each segment. This will always panic as each segment only contains enough space for one MSS. This was not detected earlier because linear packets should be rare for GSO. In fact it still remains to be seen what exactly created the linear packets that triggered this bug. Basically the only time this should happen is if someone enables GSO emulation on an interface that does not support SG. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | [XFRM] xfrm_user: Fix unaligned accesses.David S. Miller2006-10-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use memcpy() to move xfrm_address_t objects in and out of netlink messages. The vast majority of xfrm_user was doing this properly, except for copy_from_user_state() and copy_to_user_state(). Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | [APPLETALK]: Fix potential OOPS in atalk_sendmsg().David S. Miller2006-10-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | atrtr_find() can return NULL, so do not blindly dereference rt->dev before we check for rt being NULL. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | [NET] sealevel: uses arp_broken_opsRandy Dunlap2006-10-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On Wed, 25 Oct 2006 18:03:13 +0200 Toralf Förster wrote: > WARNING: "arp_broken_ops" [drivers/net/wan/sealevel.ko] undefined! > make[1]: *** [__modpost] Error 1 > make: *** [modules] Error 2 > > Here's the config: ... > # CONFIG_INET is not set > CONFIG_SEALEVEL_4021=m Sealevel uses arp_broken_ops so it needs to depend on INET. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds2006-10-31
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Add some missing print_symbol() calls. [SPARC64]: Fix Tomatillo/Schizo IRQ handling.
| * | | | [SPARC64]: Add some missing print_symbol() calls.David S. Miller2006-10-30
| | | | | | | | | | | | | | | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | [SPARC64]: Fix Tomatillo/Schizo IRQ handling.David S. Miller2006-10-30
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The code in schizo_irq_trans_init() should set irq_data->sync_reg to the location of the SYNC register if this is Tomatillo, and set it to zero otherwise. But that is not what it is doing. As a result, non-Tomatillo systems were trying to access a non-existent register resulting in bus errors at the first PCI interrupt. Thanks to Roland Stigge for the bug report. Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | [PATCH] md: check bio address after mapping through partitions.NeilBrown2006-10-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Partitions are not limited to live within a device. So we should range check after partition mapping. Note that 'maxsector' was being used for two different things. I have split off the second usage into 'old_sector' so that maxsector can be still be used for it's primary usage later in the function. Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Neil Brown <neilb@suse.de> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | [PATCH] eCryptfs: Fix handling of lower d_countMichael Halcrow2006-10-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the use of dget/dput calls to balance out on the lower filesystem. Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-17 13:56:00 -0500