aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
* [ARM] pxa: add cpufreq supportRussell King2008-01-26
| | | | | | | There have been patches hanging around for ages to add support for cpufreq to PXA255 processors. It's about time we applied one. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] pxa: initialise SSP earlierRussell King2008-01-26
| | | | | | | Initialise the SSP driver at arch_initcall() time, so it's available for other drivers to use it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] pxa: only register "cpld_irq" for the correct platformRussell King2008-01-26
| | | | | | | Only register the "cpld_irq" sysclass for mainstone/lubbock if we're running on one of those platforms. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] pxa: make pxa2xx_spi driver use ssp_request()/ssp_free()eric miao2008-01-26
| | | | | | | | | | | | | | | | | | | | 1. make pxa2xx_spi.c use ssp_request() and ssp_free() to get the common information of the designated SSP port. 2. remove those IRQ/memory request code, ssp_request() has done that for the driver 3. the SPI platform device is thus made psuedo, no resource (memory/IRQ) has to be defined, all will be retreived by ssp_request() 4. introduce ssp_get_clk_div() to handle controller difference in clock divisor setting 5. use clk_xxx() API for clock enable/disable, and clk_get_rate() to handle the different SSP clock frequency between different processors Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] pxa: use __raw_writel()/__raw_readl() for ssp_xxxx()eric miao2008-01-26
| | | | | | | | | | 1. change SSP register definitions from absolute virtual addresses to offsets 2. use __raw_writel()/__raw_readl() for functions of ssp_xxxx() Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] pxa: move SSP register definitions from pxa-regs.h to regs-ssp.heric miao2008-01-26
| | | | | Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] pxa: define "struct ssp_device" and add ssp_request()/ssp_free()eric miao2008-01-26
| | | | | | | | | | 1. define "struct ssp_device" for SSP information, which is requested and released by function ssp_request()/ssp_free() 2. modify the ssp_init() and ssp_exit() to use the interface Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] pxa: add ssp devices and clk support for pxa25x/pxa27x/pxa3xxeric miao2008-01-26
| | | | | Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] pxa: define SSP platform devices for pxa2xx/pxa3xxeric miao2008-01-26
| | | | | Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4663/1: Only putc uncompressor output into FFUART if it was enabled by ↵Philipp Zabel2008-01-26
| | | | | | | | | | the bootloader Also, use existing register and bit definitions instead of numbers. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] pxa/sa1100: replace wakeup supportRussell King2008-01-26
| | | | | | | | | Replace wakeup support using the alarm via the SA1100 RTC driver on SA1100 and PXA platforms. This allows RTC alarm wakeup to be enabled via sysfs using the conventional attributes. Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] pxa: Don't wind OSCR backwards over suspend/resumeRussell King2008-01-26
| | | | | | | | | OSCR is supposed to monotonically increment; however restoring it to a time prior to OSMR0 may result in it being wound backwards. Instead, if OSMR0 is within the minimum expiry time, wind OSMR0 forwards. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] pxa: remove periodic mode emulation supportRussell King2008-01-26
| | | | | | | | | Apparantly, the generic time subsystem can accurately emulate periodic mode via the one-shot support code, so we don't need our own periodic emulation code anymore. Just ensure that we build support for one shot into the generic time subsystem. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] pxa: mainstone: update backlight to use the backlight infrastructureRussell King2008-01-26
| | | | | | | Linux has framebuffer backlight support infrastructure which should be used to expose backlight attributes. Mainstone should use it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] pxa: avoid always registering MMC, I2C, IrDA and framebuffer devicesRussell King2008-01-26
| | | | | | | | Only register the MMC, framebuffer, I2C and FICP devices when the platform supplies the necessary platform data structures for the devices. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Update mach-typesRussell King2008-01-26
| | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds2008-01-25
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (200 commits) [SCSI] usbstorage: use last_sector_bug flag universally [SCSI] libsas: abstract STP task status into a function [SCSI] ultrastor: clean up inline asm warnings [SCSI] aic7xxx: fix firmware build [SCSI] aacraid: fib context lock for management ioctls [SCSI] ch: remove forward declarations [SCSI] ch: fix device minor number management bug [SCSI] ch: handle class_device_create failure properly [SCSI] NCR5380: fix section mismatch [SCSI] sg: fix /proc/scsi/sg/devices when no SCSI devices [SCSI] IB/iSER: add logical unit reset support [SCSI] don't use __GFP_DMA for sense buffers if not required [SCSI] use dynamically allocated sense buffer [SCSI] scsi.h: add macro for enclosure bit of inquiry data [SCSI] sd: add fix for devices with last sector access problems [SCSI] fix pcmcia compile problem [SCSI] aacraid: add Voodoo Lite class of cards. [SCSI] aacraid: add new driver features flags [SCSI] qla2xxx: Update version number to 8.02.00-k7. [SCSI] qla2xxx: Issue correct MBC_INITIALIZE_FIRMWARE command. ...
| * [SCSI] usbstorage: use last_sector_bug flag universallyHans de Goede2008-01-25
| | | | | | | | | | | | | | | | | | | | | | | | This patch sets the last_sector_bug flag to 1 for all USB disks. This is needed to makes the cardreader on various HP multifunction printers work. Since the performance impact is negible we set this flag for all USB disks to avoid an unusual_devs.h nightmare. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Acked-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] libsas: abstract STP task status into a functionJames Bottomley2008-01-25
| | | | | | | | | | | | | | | | | | Break out the frame processor for STP tasks from aic94xx so they can be shared by other SAS HBA's Original patch from Jeff Garzik <jeff@garzik.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] ultrastor: clean up inline asm warningsFrederik Deweerdt2008-01-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To: linux-kernel@vger.kernel.org Cc: bunk@kernel.org Subject: [trivial patch] scsi/ultrastor: clean up inline asm warnings Hi, Compiling latest mainline with gcc 4.2.1 spews the following warnings: drivers/scsi/ultrastor.c: In function 'find_and_clear_bit_16': drivers/scsi/ultrastor.c:303: warning: matching constraint does not allow a register drivers/scsi/ultrastor.c:302: warning: matching constraint does not allow a register drivers/scsi/ultrastor.c: At top level: drivers/scsi/ultrastor.c:1202: warning: matching constraint does not allow a register drivers/scsi/ultrastor.c:1202: warning: matching constraint does not allow a register drivers/scsi/ultrastor.c: In function 'ultrastor_queuecommand': drivers/scsi/ultrastor.c:698: warning: matching constraint does not allow a register drivers/scsi/ultrastor.c:698: warning: matching constraint does not allow a register drivers/scsi/ultrastor.c:698: warning: matching constraint does not allow a register drivers/scsi/ultrastor.c:698: warning: matching constraint does not allow a register drivers/scsi/ultrastor.c:698: warning: matching constraint does not allow a register drivers/scsi/ultrastor.c:698: warning: matching constraint does not allow a register drivers/scsi/ultrastor.c:698: warning: matching constraint does not allow a register drivers/scsi/ultrastor.c:302: warning: matching constraint does not allow a register drivers/scsi/ultrastor.c:302: warning: matching constraint does not allow a register The following patch fixes it by using the '+' operator on the (*field) operand, marking it as read-write to gcc. I diffed the two resulting .s, and gcc produced the same code. This was tested with gcc 4.2.1 and gcc 3.4.3 Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com> Cc: Adrian Bunk <trivial@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] aic7xxx: fix firmware buildVegard Nossum2008-01-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the proper $(obj) and $(src) prefixes to dependency rules in aic7xxx makefile. Without this patch, there is a remote possibility that parallel make with a different output directory can fail. Also changed the deprecated EXTRA_CFLAGS construct to ccflags-y syntax. Fixed up patch to survive "make drivers/scsi/ -j" with BUILD_FIRMWARE enable. /Sam Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] aacraid: fib context lock for management ioctlsSalyzyn, Mark2008-01-25
| | | | | | | | | | | | | | | | | | | | | | | | | | Alan noticed the lack of locking surrounding the driver's dealings with the fib context managed by the trio of ioctls that are used by the RAID management applications to retrieve Adapter Initiated FIBs. I merely expanded the fib lock to include the fib context. There have been no field reports of any issues generally because the applications are relatively static and do not come and go often enough to stress this area. I bloated this patch a little with some space junk. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] ch: remove forward declarationsFUJITA Tomonori2008-01-25
| | | | | | | | | | | | | | | | | | | | This moves ch_template and changer_fops structs to the end of file and removes forward declarations. This also removes some trailing whitespace. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] ch: fix device minor number management bugFUJITA Tomonori2008-01-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ch_probe uses the total number of ch devices as minor. ch_probe: ch->minor = ch_devcount; ... ch_devcount++; Then ch_remove decreases ch_devcount: ch_remove: ch_devcount--; If you have two ch devices, sch0 and sch1, and remove sch0, ch_devcount is 1. Then if you add another ch device, ch_probe tries to create sch1. So you get a warning and fail to create sch1: Jan 24 16:01:05 nice kernel: sysfs: duplicate filename 'sch1' can not be created Jan 24 16:01:05 nice kernel: WARNING: at fs/sysfs/dir.c:424 sysfs_add_one() Jan 24 16:01:05 nice kernel: Pid: 2571, comm: iscsid Not tainted 2.6.24-rc7-ga3d2c2e8-dirty #1 Jan 24 16:01:05 nice kernel: Jan 24 16:01:05 nice kernel: Call Trace: Jan 24 16:01:05 nice kernel: [<ffffffff802a22b8>] sysfs_add_one+0x54/0xbd Jan 24 16:01:05 nice kernel: [<ffffffff802a283c>] create_dir+0x4f/0x87 Jan 24 16:01:05 nice kernel: [<ffffffff802a28a9>] sysfs_create_dir+0x35/0x4a Jan 24 16:01:05 nice kernel: [<ffffffff803069a1>] kobject_get+0x12/0x17 Jan 24 16:01:05 nice kernel: [<ffffffff80306ece>] kobject_add+0xf3/0x1a6 Jan 24 16:01:05 nice kernel: [<ffffffff8034252b>] class_device_add+0xaa/0x39d Jan 24 16:01:05 nice kernel: [<ffffffff803428fb>] class_device_create+0xcb/0xfa Jan 24 16:01:05 nice kernel: [<ffffffff80229e09>] printk+0x4e/0x56 Jan 24 16:01:05 nice kernel: [<ffffffff802a2054>] sysfs_ilookup_test+0x0/0xf Jan 24 16:01:05 nice kernel: [<ffffffff88022580>] :ch:ch_probe+0xbe/0x61a (snip) This patch converts ch to use a standard minor number management way, idr like sg and bsg. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] ch: handle class_device_create failure properlyFUJITA Tomonori2008-01-23
| | | | | | | | | | | | | | When class_device_create fails, ch_probe needs to fail too. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] NCR5380: fix section mismatchRandy Dunlap2008-01-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many release() methods that are not __exit or __devexit call this __devexit function, so remove its "__devexit" attribute. scsi/g_NCR5380.c: WARNING: vmlinux.o(.text+0xadaf8c): Section mismatch: reference to .exit.text:NCR5380_exit (between 'generic_NCR5380_release_resources' and 'generic_NCR5380_biosparam') WARNING: vmlinux.o(.text+0xadd18c): Section mismatch: reference to .exit.text:NCR5380_exit (between 'generic_NCR5380_release_resources' and 'generic_NCR5380_biosparam') scsi/pas16.c, seagate.c: WARNING: vmlinux.o(.text+0xb29e91): Section mismatch: reference to .exit.text:NCR5380_exit (between 'pas16_release' and 'seagate_st0x_info') t128.c: WARNING: vmlinux.o(.text+0xb2a774): Section mismatch: reference to .exit.text:NCR5380_exit (between 't128_release' and 't128_biosparam') dtc.c, sym2/sym_fw.c: WARNING: vmlinux.o(.text+0xb2f215): Section mismatch: reference to .exit.text:NCR5380_exit (between 'dtc_release' and 'sym_fw1_patch') Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] sg: fix /proc/scsi/sg/devices when no SCSI devicesTony Battersby2008-01-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch "[SCSI] sg: use idr to replace static arrays" in 2.6.24-rc1 causes a bogus line to appear in /proc/scsi/sg/devices containing "-1 -1 -1 -1 -1 -1 -1 -1 -1" when there are no SCSI devices in the system. In 2.6.23, /proc/scsi/sg/devices is empty when there are no SCSI devices in the system. A similar problem exists with /proc/scsi/sg/device_strs. The following patch restores the behavior of 2.6.23. Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Acked-by: Douglas Gilbert <dougg@torque.net> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] IB/iSER: add logical unit reset supportErez Zilber2008-01-23
| | | | | | | | | | | | | | | | | | eh_device_reset_handler was already added to scsi_host_template in iscsi_tcp, and is now added also for iscsi_iser. Signed-off-by: Erez Zilber <erezz@voltaire.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] don't use __GFP_DMA for sense buffers if not requiredJames Bottomley2008-01-23
| | | | | | | | | | | | | | | | | | | | Only hosts which actually have ISA DMA requirements need sense buffers coming out of ZONE_DMA, so only use the __GFP_DMA flag for that case to avoid allocating this scarce resource if it's not necessary. [tomo: fixed slab leak in failure case] Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] use dynamically allocated sense bufferFUJITA Tomonori2008-01-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This removes static array sense_buffer in scsi_cmnd and uses dynamically allocated sense_buffer (with GFP_DMA). The reason for doing this is that some architectures need cacheline aligned buffer for DMA: http://lkml.org/lkml/2007/11/19/2 The problems are that scsi_eh_prep_cmnd puts scsi_cmnd::sense_buffer to sglist and some LLDs directly DMA to scsi_cmnd::sense_buffer. It's necessary to DMA to scsi_cmnd::sense_buffer safely. This patch solves these issues. __scsi_get_command allocates sense_buffer via kmem_cache_alloc and attaches it to a scsi_cmnd so everything just work as before. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] scsi.h: add macro for enclosure bit of inquiry dataJames Bottomley2008-01-23
| | | | | | | | | | | | The macro tells us whether the device is (or contains) an enclosure device. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] sd: add fix for devices with last sector access problemsHans de Goede2008-01-23
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds a new scsi_device flag (last_sector_bug) for devices which contain a bug where the device crashes when the last sector is read in a larger then 1 sector read. This is for example the case with sdcards in the HP PSC1350 printer cardreader and in the HP PSC1610 printer cardreader. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] fix pcmcia compile problemJames Bottomley2008-01-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch commit 8ae732a91df051aba6820068a47b631a06599d84 Author: Tejun Heo <htejun@gmail.com> Date: Fri Dec 7 22:36:23 2007 +0900 [SCSI] make pcmcia directory use obj-y|m instead of subdir-y|m Moved the scsi Makefile into conformance, but also caused the pcmcia subdirectory to get built in for the first time, leading to duplicate symbols in an allyesconfig build. Since evidently no-one relies on these being built in, fix this by ensuring they can only be built as modules. Acked-by: Tejun Heo <htejun@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] aacraid: add Voodoo Lite class of cards.Salyzyn, Mark2008-01-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The cards being added are supported in a limited sense already through family matching, but we needed to add some functionality to the driver to expose selectively the physical drives. These Physical drives are specifically marked to not be part of any array and thus are declared JBODs (Just a Bunch Of Drives) for generic SCSI access. We report that this is the second patch in a set of two, but merely depends on the stand-alone functionality of the first patch which adds in that case the ability to report a driver feature flag via sysfs. We leverage that functionality by reporting that this driver now supports this new JBOD feature for the controller so that the array management applications may react accordingly and guide the user as they manage the controller. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] aacraid: add new driver features flagsSalyzyn, Mark2008-01-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Feature enhancement, adding a 'flags' entry that will reside in the host controller's tree, with a newline separated list of arbitrary ascii named features that indicate whether the combination of driver and controller has support for said feature. Breaking from the one-line output typical of sysfs entries, newline was added to tailor for grep, or simple gets line by line string match within an application. I added one for a compiler time check for existence of debug print output, one for an optional manifest defined enhanced status reporting in the logs, and one for runtime reporting whether the controller and driver supports arrays larger than 2TB. Adaptec's storage management software uses the last flag to determine whether to make available the creation of arrays larger than 2TB, otherwise a warning is posted. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] qla2xxx: Update version number to 8.02.00-k7.Andrew Vasquez2008-01-23
| | | | | | | | | | Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] qla2xxx: Issue correct MBC_INITIALIZE_FIRMWARE command.Seokmann Ju2008-01-23
| | | | | | | | | | | | | | | | | | | | | | There is a case where 54xx HBA loads MID firmware as it use 24xx firmware. In this case, the driver should issue MBC_MID_INITIALIZE FIRMWARE even though the HBA doesn't support NPIV. This patch make changes in the driver so that could behave accordingly. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] qla2xxx: Correct late-memset() of EFT buffer.Andrew Vasquez2008-01-23
| | | | | | | | | | | | | | | | | | | | Original code would clear the buffer after the firmware had already been initialized to use the buffer, thus potentially and inadvertantly clearing data previously DMA'd by the firmware. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] qla2xxx: Add Fibre Channel Event (FCE) tracing support.Andrew Vasquez2008-01-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | FCE support enables the firmware to record FC extended link services and basic link services frames which have been transmitted and received by the ISP. This allows for a limited view of the FC traffic through the ISP without using a FC analyzer. This can be useful in situations where a physical connection to the FC bus is not possible. The driver exports this information in two ways -- first, via a debugfs node exported for all supported ISPs under: <debugfs_mount_point>/qla2xxx/qla2xxx_<host_no>/fce where a read of the 'fce' file will provide a snapshot of the firmware's FCE buffer; and finally, the FCE buffer will be extracted during a firmware-dump scenario. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] qla2xxx: Trace-Control naming cleanups.Andrew Vasquez2008-01-23
| | | | | | | | | | | | | | In preparation for FCE (Fibre Channel Event) tracing support. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] qla2xxx: Code cleanups.Adrian Bunk2008-01-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - make the following needlessly global code static: - qla_attr.c: qla24xx_vport_delete() - qla_attr.c: qla24xx_vport_disable() - qla_mid.c: qla24xx_allocate_vp_id() - qla_mid.c: qla24xx_find_vhost_by_name() - qla_mid.c: qla2x00_do_dpc_vp() - qla_os.c: struct qla2x00_driver_template - qla_os.c: qla2x00_stop_timer() - qla_os.c: qla2x00_mem_alloc() - qla_os.c: qla2x00_mem_free() - qla_sup.c: qla2x00_lock_nvram_access() - qla_sup.c: qla2x00_unlock_nvram_access() - qla_sup.c: qla2x00_get_nvram_word() - qla_sup.c: qla2x00_write_nvram_word() - #if 0 the following unused global functions: - qla_mbx.c: qla2x00_system_error() - qla_os.c: remove some unneeded function prototypes - removed unused functions: - qla_dbg.c: qla2x00_dump_pkt() - qla_mbx.c: qla2x00_get_serdes_params() - qla_mbx.c: qla2x00_get_idma_speed() - qla_mbx.c: qla24xx_get_vp_database() - qla_mbx.c: qla24xx_get_vp_entry() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Small modifications and Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] qla2xxx: Add a filter to compare port_name against the physical on ↵Seokmann Ju2008-01-23
| | | | | | | | | | | | | | | | | | | | | | | | vport creation. During vport creation, there was a possibility to get create a vport with same port_name as pport. A new filter has added to compare given port_name with the port_name of the pport. Signed-Off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] qla2xxx: Use completion routines.Marcus Barrow2008-01-23
| | | | | | | | | | | | | | | | | | Instead of abusing the semaphore interfaces for mailbox command completions. Additional cleanups and Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] qla2xxx: Don't schedule the DPC routine to perform an issue-lip request.Andrew Vasquez2008-01-23
| | | | | | | | | | | | | | | | | | | | As the driver depends on the DPC routine to handle bottom-half loop resynchronization in order to recover from the issue-lip request. The issue_lip call is sleeping context capable, so just issue the reset function there. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] qla2xxx: Restrict MSI/MSI-X enablement on select ISP2432-type HBAs.Andrew Vasquez2008-01-23
| | | | | | | | | | Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] qla2xxx: Wait for FLASH write-protection to complete after a write.Andrew Vasquez2008-01-23
| | | | | | | | | | | | | | | | | | | | Some flash parts have a slow enable write-protection (WP) operation whereby subsequent FLASH accesses would fail if the WP operation had not completed. Software now polls the SPI's status-register for WP completion. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] qla2xxx: Fix for 32-bit platforms with 64-bit resources.Andrew Vasquez2008-01-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver stores the contents of PCI resources into unsigned long's before ioremapping. This breaks on 32-bit platforms which support 64-bit MMIO resources. Correct code by removing the temporary variables used during MMIO PIO mapping and using resource_size_t where applicable. Also correct a small typo in a printk() where the wrong region number was displayed. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] qla2xxx: Retrieve additional HBA port statistics from recent ISPs.Andrew Vasquez2008-01-23
| | | | | | | | | | | | | | | | HBAs supporting these additional counters include ISP24xx and ISP25xx type boards. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] qla2xxx: Consolidate duplicate sense-data handling codes.Andrew Vasquez2008-01-23
| | | | | | | | | | Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] st: convert to unlocked_ioctlKai Makisara2008-01-23
| | | | | | | | | | | | | | Convert st to unlocked_ioctl. The necessary locking was already in place. Signed-off-by: Kai Makisara <kai.makisara@kolumbus.fi> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-07 01:21:17 -0500