aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
* [MIPS] MT: Nuke duplicate mips_mt_regdump() prototype.Ralf Baechle2007-02-06
| | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Alchemy: Fix PCI-memory accessAlexander Bigga2007-02-06
| | | | | | | | | | | | | | | | | | | | | | | | | | The problem was introduced in 2.6.18.3 with the casting of some 36bit-defines (PCI memory) in au1000.h to resource_size_t which may be u32 or u64 depending on the experimental CONFIG_RESOURCES_64BIT. With unset CONFIG_RESOURCES_64BIT, the pci-memory cannot be accessed because the ioremap in arch/mips/au1000/common/pci.c already used the truncated addresses. With set CONFIG_RESOURCES_64BIT, things get even worse, because PCI-scan aborts, due to resource conflict: request_resource() in arch/mips/pci/pci.c fails because the maximum iomem-address is 0xffffffff (32bit) but the pci-memory-start-address is 0x440000000 (36bit). To get pci working again, I propose the following patch: 1. remove the resource_size_t-casting from au1000.h again 2. make the casting in arch/mips/au1000/common/pci.c (it's allowed and necessary here. The 36bit-handling will be done in __fixup_bigphys_addr). With this patch pci works again like in 2.6.18.2, the gcc-compile warnings in pci.c are gone and it doesn't depend on CONFIG_EXPERIMENTAL. Signed-off-by: Alexander Bigga <ab@mycable.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Move .set reorder out of conditional codeChris Dearman2007-02-06
| | | | | Signed-off-by: Chris Dearman <chris@mips.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Check FCSR for pending interrupts before restoring from a context.Chris Dearman2007-02-06
| | | | | Signed-off-by: Chris Dearman <chris@mips.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Jaguar ATX: Fix large number of warnings.Ralf Baechle2007-02-06
| | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Jaguar: Fix MAC address detection after platform_device conversion.Ralf Baechle2007-02-06
| | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] SMTC: Make a bunch of functions and variables static.Ralf Baechle2007-02-06
| | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Use compat_sys_pselect6Joseph S. Myers2007-02-06
| | | | | | | | The N32 and O32 pselect6 syscalls need to use compat_sys_pselect6 to translate arguments from 32-bit to 64-bit layout. Signed-off-by: Joseph Myers <joseph@codesourcery.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] SMTC: Cleanup idle hook invocation.Ralf Baechle2007-02-06
| | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] SELinux: Add security hooks to mips-mt {get,set}affinityDavid Quigley2007-02-06
| | | | | | | | | | | | | This patch adds LSM hooks into the setaffinity and getaffinity functions for the mips architecture to enable security modules to control these operations between tasks with different security attributes. This implementation uses the existing task_setscheduler and task_getscheduler LSM hooks. Signed-Off-By: David Quigley <dpquigl@tycho.nsa.gov> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@namei.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] IRIX: Linux coding style cleanups.Ralf Baechle2007-02-06
| | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] PB1100: Fix pile of warningsRalf Baechle2007-02-06
| | | | | | | | | | | | | | | | CC arch/mips/au1000/pb1100/board_setup.o arch/mips/au1000/pb1100/board_setup.c: In function ‘board_setup’: arch/mips/au1000/pb1100/board_setup.c:104: warning: passing argument 1 of ‘readb’ makes pointer from integer without a cast arch/mips/au1000/pb1100/board_setup.c:105: warning: passing argument 1 of ‘readb’ makes pointer from integer without a cast arch/mips/au1000/pb1100/board_setup.c:105: warning: passing argument 2 of ‘writeb’ makes pointer from integer without a cast arch/mips/au1000/pb1100/board_setup.c:109: warning: passing argument 1 of ‘readb’ makes pointer from integer without a cast arch/mips/au1000/pb1100/board_setup.c:110: warning: passing argument 1 of ‘readb’ makes pointer from integer without a cast arch/mips/au1000/pb1100/board_setup.c:110: warning: passing argument 2 of ‘writeb’ makes pointer from integer without a cast arch/mips/au1000/pb1100/board_setup.c:51: warning: unused variable ‘sys_clksrc’ arch/mips/au1000/pb1100/board_setup.c:51: warning: unused variable ‘sys_freqctrl’ arch/mips/au1000/pb1100/board_setup.c:50: warning: unused variable ‘pin_func’ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Alchemy: Fix bunch of warningsRalf Baechle2007-02-06
| | | | | | | | | | | | CC arch/mips/au1000/common/pci.o arch/mips/au1000/common/pci.c:42: warning: large integer implicitly truncated to unsigned type arch/mips/au1000/common/pci.c:43: warning: large integer implicitly truncated to unsigned type arch/mips/au1000/common/pci.c:49: warning: large integer implicitly truncated to unsigned type arch/mips/au1000/common/pci.c:50: warning: large integer implicitly truncated to unsigned type arch/mips/au1000/common/pci.c: In function ‘au1x_pci_setup’: arch/mips/au1000/common/pci.c:82: warning: ISO C90 forbids mixed declarations and code Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Whitespace cleanups.Ralf Baechle2007-02-06
| | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Alchemy: Fix bunch more warnings.Ralf Baechle2007-02-06
| | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Use ARRAY_SIZE macro when appropriateAhmed S. Darwish2007-02-06
| | | | | Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Fix some whitespace damageJan Altenberg2007-02-06
| | | | | Signed-off-by: Jan Altenberg <jan@linutronix.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Add missing ifdef arch/mips/pmc-sierra/yosemite/setup.cMathieu Desnoyers2007-02-06
| | | | | | | early_serial_setup is only defined when CONFIG_SERIAL_8250 is set. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Fix pb1200/irqmap.c and apply some missed patchesAtsushi Nemoto2007-02-06
| | | | | | | | | | | | | | | | pb1200/irqmap.c had been broken a while due to non-named initializer and had missed some recent IRQ related changes. Apply these commits to this file. [MIPS] IRQ cleanups commit 1603b5aca4f15b34848fb5594d0c7b6333b99144 [MIPS] use generic_handle_irq, handle_level_irq, handle_percpu_irq commit 1417836e81c0ab8f5a0bfeafa90d3eaa41b2a067 [MIPS] Compile __do_IRQ() when really needed commit e77c232cfc6e1250b2916a7c69225d6634d05a49 Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Do not allow oprofile to be enabled on SMTC.Ralf Baechle2007-02-06
| | | | | | Oprofile cannot work on SMTC due to the limited number of counters. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Remove superfluous "ifdef CONFIG_KGDB".Robert P. J. Day2007-02-06
| | | | | | | | | | | | | Given that the Makefiles involved already have conditional compilation of the form: obj-$(CONFIG_KGDB) += dbg_io.o there seems to be little value for the dbg_io.c source files to check that config variable yet again. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] vpe_elfload and vpe_run are only used locally, make them static.Ralf Baechle2007-02-06
| | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] SMTC: remove unused atomic_postclearRalf Baechle2007-02-06
| | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Move some kernel globals from asm file to C file.Atsushi Nemoto2007-02-06
| | | | | | | | This get rid of some undesirable hole in BSS section due to random order of placement. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Remove _fdata from asm-mips/sections.hAtsushi Nemoto2007-02-06
| | | | | | | There is no _fdata symbol in kernel. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Kconfig: Provide sane NR_CPUS defaults for more configurationsRalf Baechle2007-02-06
| | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] vr41xx: Use symbolic names for IRQ numersYoichi Yuasa2007-02-06
| | | | | Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] use name instead of typename for each irq_chipAtsushi Nemoto2007-02-06
| | | | | | | The "typename" field was obsoleted by the "name" field. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Kconfig: Move some entries to appropriate menuAtsushi Nemoto2007-02-06
| | | | | | | | | | Currently KEXEC is in "Machine selection", SECCOMP, PM, APM are in "Executable file formats" menu. Move KEXEC and SECCOMP to "Kernel type" and PM, APM to new "Power management options" menu. Also replace "config PM" with kernel/power/Kconfig. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] vr41xx: add MACINT controlsYoichi Yuasa2007-02-06
| | | | | | | | This patch has added MACINT controls. They are necessary for VR4133 ethernet driver. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] FLATMEM: introduce PHYS_OFFSET.Franck Bui-Huu2007-02-06
| | | | | | | | | | | | | | | | | | | The old code was assuming that min_low_pfn was always 0. This means that platforms having a big hole at their memory start paid the price of wasting some memory for the allocation of unused entries in mem_map[]. This patch prevents this waste. It introduces PHYS_OFFSET define which is the start of the physical memory and uses it wherever needed. Specially when converting physical/virtual addresses into virtual/physical ones. Currently all platforms defines PHYS_OFFSET to 0. Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Setup min_low_pfn/max_low_pfn correctlyFranck Bui-Huu2007-02-06
| | | | | | | | | This patch makes a better usage of these two globals. 'min_low_pfn' is now correctly setup for all configs, which allow us to rely on it in boot memory code init. Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Unify memset.SAtsushi Nemoto2007-02-06
| | | | | | | | | The 32-bit version and 64-bit version are almost equal. Unify them. This makes further improvements (for example, supporting CDEX, etc.) easier. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] prom_free_prom_memory cleanupAtsushi Nemoto2007-02-06
| | | | | | | | | Current prom_free_prom_memory() implementations are almost same as free_init_pages(), or no-op. Make free_init_pages() extern (again) and make prom_free_prom_memory() use it. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Make I8259A_IRQ_BASE customizableAtsushi Nemoto2007-02-06
| | | | | | | | | | Move I8259A_IRQ_BASE from asm/i8259.h to asm/mach-generic/irq.h and make it really customizable. And remove I8259_IRQ_BASE declared on some platforms. Currently only NEC_CMBVR4133 is using custom I8259A_IRQ_BASE value. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Define MIPS_CPU_IRQ_BASE in generic headerAtsushi Nemoto2007-02-06
| | | | | | | | | | | | | | | | | | | | | | The irq_base for {mips,rm7k,rm9k}_cpu_irq_init() are constant on all platforms and are same value on most platforms (0 or 16, depends on CONFIG_I8259). Define them in asm-mips/mach-generic/irq.h and make them customizable. This will save a few cycle on each CPU interrupt. A good side effect is removing some dependencies to MALTA in generic SMTC code. Although MIPS_CPU_IRQ_BASE is customizable, this patch changes irq mappings on DDB5477, EMMA2RH and MIPS_SIM, since really customizing them might cause some header dependency problem and there seems no good reason to customize it. So currently only VR41XX is using custom MIPS_CPU_IRQ_BASE value, which is 0 regardless of CONFIG_I8259. Testing this patch on those platforms is greatly appreciated. Thank you. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Remove unused rm9k_cpu_irq_disable()Atsushi Nemoto2007-02-06
| | | | | | | | rm9k_cpu_irq_disable() is unused since commit 1603b5aca4f15b34848fb5594d0c7b6333b99144. Remove it. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* Linux 2.6.20v2.6.20Linus Torvalds2007-02-04
|
* [PATCH] EFI x86: pass firmware call parameters on the stackFrédéric Riss2007-02-04
| | | | | | | | | | When calling into the EFI firmware, the parameters need to be passed on the stack. The recent change to use -mregparm=3 breaks x86 EFI support. This patch is needed to allow the new Intel-based Macs to suspend to ram (efi.get_time is called during the suspend phase). Signed-off-by: Frederic Riss <frederic.riss@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] fix rtl8150Al Viro2007-02-03
| | | | | | | That code doesn't do what its author apparently thought it would do... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds2007-02-03
|\ | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] sd: udev accessing an uninitialized scsi_disk field results in a crash [SCSI] st: A MTIOCTOP/MTWEOF within the early warning will cause the file number to be incorrect [SCSI] qla4xxx: bug fixes [SCSI] Fix scsi_add_device() for async scanning
| * [SCSI] sd: udev accessing an uninitialized scsi_disk field results in a crashNagendra Singh Tomar2007-02-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sd_probe() calls class_device_add() even before initializing the sdkp->device variable. class_device_add() eventually results in the user mode udev program to be called. udev program can read the the allow_restart attribute of the newly created scsi device. This is resulting in a crash as the show function for allow_restart (i.e sd_show_allow_restart) returns the attribute value by reading the sdkp->device->allow_restart variable. As the sdkp->device is not initialized before calling the user mode hotplug helper, this results in a crash. The patch below solves it by calling class_device_add() only after the necessary fields in the scsi_disk structure are initialized properly. Signed-off-by: Nagendra Singh Tomar <nagendra_tomar@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] st: A MTIOCTOP/MTWEOF within the early warning will cause the file ↵Kai Makisara2007-01-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | number to be incorrect On Wed, 24 Jan 2007, Andrew Morton wrote: > On Mon, 22 Jan 2007 13:07:20 -0800 > bugme-daemon@bugzilla.kernel.org wrote: > > > http://bugzilla.kernel.org/show_bug.cgi?id=7864 > > > > Summary: A MTIOCTOP/MTWEOF within the early warning will cause > > the file number to be incorrect > > Kernel Version: 2.6.19.2 > > Status: NEW > > Severity: low > > Owner: io_scsi@kernel-bugs.osdl.org > > Submitter: ce_reisinger@yahoo.com > > > > > > Write records to a SCSI tape until a write fails with a ENOSPC (you have reached > > early warning. > > Now perform a: > > struct mtget before, after; > > ioctl(fd, MTIOCGET, &before); > > struct mtop mtop = { MTWEOF, 1 }; > > ioctl(fd, MTIOCTOP, &mtop); > > ioctl(fd, MTIOCGET, &after); > > > > Check the value of mt_fileno in the before and after structures. Notice the > > after is 2 greater then the before. > > > > The problem appears to be in the block of code starting at line 2817 in st.c. > > This block is entered because the drive did return a CHECK CONDITION with NO > > SENSE and the SENSE_EOM bit set. At lines 2824/5 the fileno is incremented. But > > it has already been increased by the number of filemarks requested by the > > MTIOCTOP. I believe that the residue count in the sense data should be > > subtracted from fileno, not a increment as is done. > > > > Thanks. Could you please send us a tested patch to fix these things, as > per http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt ? > The analysis is basically correct and explains the bug. According to the SCSI standards, the sense code is NO SENSE or RECOVERED ERROR in case writing filemark(s) succeeds. If it fails (partly or completely) the sense code is VOLUME OVERFLOW. The patch below is tested to fix the case when one filemark is successfully written after the EOM early warning. It should also fix the case at real EOM but this has not been tested. Carl, thanks for reporting the bug and providing the analysis for the fix. Signed-off-by: Kai Makisara <kai.makisara@kolumbus.fi> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] qla4xxx: bug fixesDavid C Somayajulu2007-01-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The included patch fixes the following issues: 1. qla3xxx/qla4xxx co-existence issue which can result in a lockup when qla3xxx driver is unloaded, or when ifdown; ifup is performed on one of the interfaces correponding to qla3xxx. This is because qla4xxx HBA supports one ethernet and iscsi interfaces per port. Both iscsi and ethernet interfaces share the same state machine. The problem has to do with synchronizing access to the state machine in the event of a reset 2. mutex_lock() is sometimes not followed by mutex_unlock() prior to invoking a msleep() in qla4xxx_mailbox_command() Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] Fix scsi_add_device() for async scanningMatthew Wilcox2007-01-27
| | | | | | | | | | | | | | | | | | | | | | | | I had thought that all drivers which didn't call scsi_scan_host() called scsi_scan_target(). Some, such as sbp2, mptsas and libata-scsi, call scsi_add_device() or __scsi_add_device(). We just need to wait for the currently executing async scans to complete first. This is the same code that's in scsi_scan_target(), except that we have to return an error instead of void when we're declining to scan at all. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* | [PATCH] x86-64: define dma noncoherent API functionsJeff Garzik2007-02-03
| | | | | | | | | | | | | | | | x86-64 is missing these: Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | [PATCH] Altix: more ACPI PRT supportJohn Keller2007-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SN Altix platform does not conform to the IOSAPIC IRQ routing model. Add code in acpi_unregister_gsi() to check if (acpi_irq_model == ACPI_IRQ_MODEL_PLATFORM) and return. Due to an oversight, this code was not added previously when similar code was added to acpi_register_gsi(). http://marc.theaimsgroup.com/?l=linux-acpi&m=116680983430121&w=2 Signed-off-by: John Keller <jpk@sgi.com> Acked-by: Len Brown <lenb@kernel.org> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | [PATCH] revert blockdev direct io back to 2.6.19 versionAndrew Morton2007-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Andrew Vasquez is reporting as-iosched oopses and a 65% throughput slowdown due to the recent special-casing of direct-io against blockdevs. We don't know why either of these things are occurring. The patch minimally reverts us back to the 2.6.19 code for a 2.6.20 release. Cc: Andrew Vasquez <andrew.vasquez@qlogic.com> Cc: Ken Chen <kenchen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | [PATCH] alpha: fix epoll syscall enumerationsMike Frysinger2007-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | We went and named them __NR_sys_foo instead of __NR_foo. It may be too late to change this, but we can at least add the proper names now. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | [PATCH] net/smc911x: match up spin lock/unlockPeter Korsgaard2007-02-03
| | | | | | | | | | | | | | | | | | | | | | smc911x_phy_configure's error handling unconditionally unlocks the spinlock even if it wasn't locked. Patch fixes it. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Cc: Jeff Garzik <jeff@garzik.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-19 03:57:12 -0500