aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
* usb: vstusb.c : new driver for spectrometers used by Vernier Software & ↵Stephen Ware2008-10-17
| | | | | | | | | | | | | | | | Technology, Inc. This patch adds the vstusb driver to the drivers/usb/misc directory. This driver provides support for Vernier Software & Technology spectrometers, all made by Ocean Optics. The driver provides both IOCTL and read()/write() methods for sending raw data to spectrometers across the bulk channel. Each method allows for a configured timeout. From: Stephen Ware <stephen.ware@eqware.net> Signed-off-by: Dennis O'Brien <dennis.obrien@eqware.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb gadget: cdc ethernet notification bugfixDavid Brownell2008-10-17
| | | | | | | | | | | | | | | | Bugfix for the new CDC Ethernet code: as part of activating the network interface's USB link, make sure its link management code knows whether the interface is open or not. Without this fix, the link won't work right when it's brought up before the link is active ... because the initial notification it sends will have the wrong link state (down, not up). Makes it hard to bridge these links (on the host side), among other things. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: stable <stable@kernel.org> [2.6.27] Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: omap_udc: sync with OMAP treeTony Lindgren2008-10-17
| | | | | | | | | | | | | Sync up USB parts of the omap_udc support in mainline with the OMAP tree. This patch addresses some OMAP2 differences ... there's another, with respect to the double-buffering issue with PIO-IN in omap_ep_setup() (which is now out of sync with the comments), but it's not clear right now how to address that. From: Tony Lindgren <tony@atomide.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ohci-omap: handle other omap15xx chipsTony Lindgren2008-10-17
| | | | | | | | | | | Sync up USB parts of the ohci-omap support in mainline with the OMAP tree. This patch supports another first generation OMAP1 part: not just the OMAP 1510 (and its catalog version, the OMAP 5910), but also OMAP 310. From: Tony Lindgren <tony@atomide.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: musb: remove dead code from procfsFelipe Balbi2008-10-17
| | | | | | | | | | | When removing the procfs file, I forgot to remove some code that created and removed that file. Here's a patch to fix it. Ideally this patch will be melded into the patch removing the procfs file, don't know if it's possible still. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: musb: general cleanup to musbhsdma.cFelipe Balbi2008-10-17
| | | | | | | | | Basically getting rid of CaMeLcAsE, but also adding missing lines and spaces. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: musb_hdrc build fixesDavid Brownell2008-10-17
| | | | | | | | | | | | | | | | | | | | | | | | | Minor musb_hdrc updates: - so it'll build on DaVinci, given relevant platform updates; * remove support for an un-shipped OTG prototype * rely on gpiolib framework conversion for the I2C GPIOs * the <asm/arch/hdrc_cnf.h> mechanism has been removed - catch comments up to the recent removal of the per-SOC header with the silicon configuration data; - and remove two inappropriate "inline" declarations which just bloat host side code. There are still some more <asm/arch/XYZ.h> ==> <mach/XYZ.h> changes needed in this driver, catching up to the relocation of most of the include/asm-arm/arch-* contents. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Cc: stable <stable@kernel.org> [2.6.27] Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: musb: do not mess up count number and CSR0 register valueBryan Wu2008-10-17
| | | | | | | Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* OMAP:MUSB: Corrects urb unlink function pathAjay Kumar Gupta2008-10-17
| | | | | | | | | | | | | | | Fixes kernel panic while ISO IN transfer is aborted.Replaced usb_hcd_unlink_urb_from_ep() from musb_giveback() to __musb_giveback() to make sure urb is unlinked before giveback when __musb_giveback() is called from musb_urb_dequeue(). Acquired musb->lock() before usb_hcd_unlink_urb_from_ep() within in enqueue path. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* OMAP:MUSB: Fixes the TT programming.Ajay Kumar Gupta2008-10-17
| | | | | | | | | | | Fixes enumeration failures when a USB device attached to a LS hub is connected to OMAP EVM via HS hub. This is fixed by correctly programming hub address register in enqueue path. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* musb: io: only define read/write stubs if they're not defined yetFelipe Balbi2008-10-17
| | | | | | | | | | | | | | | For those archs which don't provide read/write friends we provide our own implementation so musb driver won't break compilation. This is temporary fix until a better solution comes from upstream. Idealy, <linux/io.h> would provide those calls if the architecture did not provide them yet. In that case being possible to remove all those stubs from musb_io.h Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Fix s3c2410_udc usb speed handlingYauhen Kharuzhy2008-10-17
| | | | | | | | | | | | | | | The new composite framework revealed a weakness in the s3c2410_udc driver gadget register function. Instead of checking if speed asked for was USB_LOW_SPEED upon usb_gadget_register() to deny service, it checked only for USB_FULL_SPEED, thus denying service to usb high speed capable gadgets (like g_ether). Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb gadget: USB_GADGET_VBUS_DRAW Kconfig optionDavid Brownell2008-10-17
| | | | | | | | | | | | | | | | | | Offer a "how much VBUS power to request" configuration option for USB gadgets that aren't using board-specific customization of their gadget or (composite) configuration drivers. Also remove a couple pointless "depends on USB_GADGET" bits from the Kconfig text; booleans inside an "if USB_GADGET" will already have that dependency. Based on a patch from Justin Clacherty. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Justin Clacherty <justin@redfish-group.com> Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* MUSB: Add sanity check for maximum number of endpointsKevin Hilman2008-10-17
| | | | | | | | | | | | | | There is no check if platform code passes in more endpoints (num_eps) than the maximum number of enpoints (MUSB_C_NUM_EPS.) The result is that allocate_instance() happily writes past the end of 'struct musb' corrupting memory. This patch adds a BUG() if the platform code requests more than the max. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: remove code associated with !CONFIG_PPC_MERGEKumar Gala2008-10-17
| | | | | | | | | | | | Now that arch/ppc is gone we don't need CONFIG_PPC_MERGE anymore remove the dead code associated with !CONFIG_PPC_MERGE. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usbmon: fix tiny race exposed by the fastboot patchesArjan van de Ven2008-10-17
| | | | | | | | | | | | | | | | | | usbmon registers the notifier chain, takes the bus lock and then goes to scan the existing devices for hooking up. Unfortunately, if usb_mon gets initialized while USB bus discovery is going on, it's possible that usbmon gets a notifier on one cpu (which runs without USB locks), and the scan is going on and also finds the new bus, resulting in a double sysfs registration, which then produces a WARNING. Pete Zaitcev did the bug diagnostics on this one Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: change hub initialization sleeps to delayed_workAlan Stern2008-10-17
| | | | | | | | | | | | | | | | | | This patch (as1137) changes the hub_activate() routine, replacing the power-power-up and debounce delays with delayed_work calls. The idea is that on systems where the USB stack is compiled into the kernel rather than built as modules, these delays will no longer block the boot thread. At least 100 ms is saved for each root hub, which can add up to a significant savings in total boot time. Arjan van de Ven was very pleased to see that this shaved 700 ms off his computer's boot time. Since his total boot time is on the order of two seconds, the improvement is considerable. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ehci-dbg: fix reading less content of periodic fileMing Lei2008-10-17
| | | | | | | | | | | | | | | This patch fix 2 problems about reading periodic file: 1. The "..." after a interrupt qh is missed because buffer pointer is not moved. 2. After setting p.ptr as NULL, its next qh or itd will be omited and can't be stored in debug buffer. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ehci-dbg: increase debug buffer size for periodic fileMing Lei2008-10-17
| | | | | | | | | | | | | | | | | This patch is based on the following ideas: 1. Some usb devices (such as usb video class) have endpoints of high interval attribute, so reading "periodic" file need more debug buffer to accommodate the qh or itd schedule information. For example, 4KB buffer is not enough for a single interrupt qh of 2ms period. 2. print a %p need 16 byte buffer on 64-bits arch, but 8 byte on 32-bits arch. Add a extra bonus for 64-bits arch. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: gadget: workaround storage command size issuesFelipe Balbi2008-10-17
| | | | | | | | | | Try to workaround issues with bad SCSI implementations by ignoring the command size error. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: g_printer: fix handling zero-length packetSangSu Park2008-10-17
| | | | | | | | | | | | | g_printer doesn't have to check whether the data size is a multiple of MaxPacketSize, because device controller driver already make that check. Signed-off-by: SangSu Park<sangsu@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Fix spelling in usb/serial.hGeoff Levand2008-10-17
| | | | | | | | Fixes a minor typo in the comments for usb_set_serial_data. Signed-off-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Fix doc for usb_autopm_enableGeoff Levand2008-10-17
| | | | | | | | | | Correct errors in the descriptions for usb_autopm_enable and usb_autopm_disable in the USB PM doc. Signed-off-by: Geoff Levand <geoff@infradead.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB Serial: Sierra: debug message fixKevin Lloyd2008-10-17
| | | | | | | | | This patch moves dbg calls to dev_dbg where possible. It also fixes some issues with a previous submission aiming to do the same thing. Signed-off-by: Kevin Lloyd <klloyd@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: RESET_RESUME needs to block autosuspend when remote wakeup is neededOliver Neukum2008-10-17
| | | | | | | | | | Reset upon resumption will wipe the input buffer and is therefore a reason to not suspend if remote wakeup is requested because the driver needs that data. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ftdi_sio: fix 'product' parameter descriptionPaulius Zaleckas2008-10-17
| | | | | | Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb core: fix USB_OTG_BLACKLIST_HUB typoPeter Korsgaard2008-10-17
| | | | | | Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Documentation/usb/anchors.txt #2Oliver Neukum2008-10-17
| | | | | | | | This adds Documentation for the extensions of the anchor API. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* OHCI: Allow broken controllers to auto-stopAlan Stern2008-10-17
| | | | | | | | | | | | | | | | | | | | This patch (as1134) attempts to improve the way we handle OHCI controllers with broken Root Hub Status Change interrupt support. In these controllers the RHSC interrupt bit essentially never turns off, making RHSC interrupts useless -- they have to remain permanently disabled. Such controllers should still be allowed to turn off their root hubs when no devices are attached. Polling for new connections can continue while the root hub is suspended. The patch implements this feature. (It won't have much effect unless CONFIG_PM is enabled and CONFIG_USB_SUSPEND is disabled, but since the overhead is very small we may as well do it.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb-storage: report underflow with no sense dataAlan Stern2008-10-17
| | | | | | | | | | | | | | | | | | This patch (as1118) addresses a problem with certain USB mass-storage devices. These devices sometimes return less data than asked for and then provide no sense data to explain the problem. Currently usb-storage leaves it up to the SCSI layer to decide how this should be handled, and the SCSI layer interprets the lack of sense data to mean that nothing went wrong. But if we got less data than required then something definitely _did_ go wrong, and we should say so. The patch tells the SCSI layer to retry the command when this sort of thing happens. Retrying may not solve the underlying problem, but it's better than believing that data was transferred when it wasn't. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: add Freescale QE/CPM USB peripheral controller driverLi Yang2008-10-17
| | | | | | | | | | | | | | | Some of Freescale SoC chips have a QE or CPM co-processor which supports full speed USB. The driver adds device mode support of both QE and CPM USB controller to Linux USB gadget. The driver is tested with MPC8360 and MPC8272, and should work with other models having QE/CPM given minor tweaks. Signed-off-by: Xie Xiaobo <X.Xie@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: drivers/usb/misc: Use an IS_ERR test rather than a NULL testJulien Brunel2008-10-17
| | | | | | | | | | | | | | | | | | | | | | | | | | In case of error, the function backlight_device_register returns an ERR pointer, but never returns a NULL pointer. So a NULL test that may come after a call to this function should be strengthened by an IS_ERR test. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @match_bad_null_test@ expression x, E; statement S1,S2; @@ x = backlight_device_register(...) ... when != x = E * if (x != NULL) S1 else S2 // </smpl> Signed-off-by: Julien Brunel <brunel@diku.dk> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: remove unused #include <version.h>Huang Weiyi2008-10-17
| | | | | | | | | | | The driver(s) below do not use LINUX_VERSION_CODE nor KERNEL_VERSION. drivers/usb/gadget/pxa27x_udc.c This patch removes the said #include <version.h>. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb gadget: defer obex enumerationDavid Brownell2008-10-17
| | | | | | | | | | | | Some USB peripheral controller drivers support software control over the data pullup. Use those controls to prevent the OBEX function from enumerating until the userspace server has opened the /dev/ttyGS* node it will use to implement protocol chitchat with the USB host. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb gadget: cdc obex glueFelipe Balbi2008-10-17
| | | | | | | | | | | | | The following patch introduces a new f_obex.c function driver. It allows userspace obex servers to use usb as transport layer for their messages. [ dbrownell@users.sourceforge.net: various fixes and cleanups ] Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb gadget: function activation/deactivationDavid Brownell2008-10-17
| | | | | | | | | | | | | | | | Add a new mechanism to the composite gadget framework, letting functions deactivate (and reactivate) themselves. Think of it as a refcounted wrapper for the software pullup control. A key example of why to use this mechanism involves functions that require a userspace daemon. Those functions shuld use this new mechanism to prevent the gadget from enumerating until those daemons are activated. Without this mechanism, hosts would see devices that malfunction until the relevant daemons start. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: gadget: net2280: implement set_wedgeAlan Stern2008-10-17
| | | | | | | | | | | This patch (as1132) implements the set_wedge() method for net2280. This method is necessary for strict USBCV compliance in g_file_storage. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: gadget: dummy_hcd: implement set_wedgeAlan Stern2008-10-17
| | | | | | | | | | This patch (as1131) implements the set_wedge() method for dummy_hcd. This method is necessary for strict USBCV compliance in g_file_storage. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: gadget Kconfig cleanupDavid Brownell2008-10-17
| | | | | | | | | | This reorders the list of USB peripheral controller drivers so it's more common for the initial (default) value to be relevant: put the SOC integrated silicon up front, discrete stuff last. Alphabetize. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Let some USB host controllers get IRQ flags from resourceMarc Zyngier2008-10-17
| | | | | | | | | | | | | | | | | | | | | | | [This version fixes a thinko in the r8a66597 driver] This patch let a few discrete USB host controllers drivers (isp116x-hcd, r8a66597-hcd and sl811-hcd) obtain IRQ flags from their IORESOURCE_IRQ resource if configured as such, much like it's been done for the smc91x driver. It spares people writing support for specific boards the burden to configure the interrupt controller independantly, and keeps all IRQ related information in a single resource. HCD that are integrally part of a SoC have been left aside, as there is probably no "wiring" options... Tested on an Xscale PXA-255 based platform with isp116x-hcd. Signed-off-by: Marc Zyngier <marc.zyngier@altran.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* ub: remove sg_statPete Zaitcev2008-10-17
| | | | | | | | Remove forgotten code related to sg_stat[]. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: extend poisoning to anchorsOliver Neukum2008-10-17
| | | | | | | | | this extends the poisoning concept to anchors. This way poisoning will work with fire and forget drivers. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: kill URBs permanentlyOliver Neukum2008-10-17
| | | | | | | | | | | | looking at usb_kill_urb() it seems to me that it is unnecessarily lenient. In the use case of disconnect() you never want to use the URB again (for the same device) But leaving urb->reject elevated will make it easier to avoid races between read/write and disconnect. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* drivers/usb/class/usblp.c: adjust error handling codeJulia Lawall2008-10-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In this code, it is possible to tell statically whether usblp will be NULL in the error handling code. Oliver Neukum suggested to make a goto to the final return rather than return directly. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ identifier f,err,l,l1; type T; expression x,E; statement S; @@ x = NULL ... when != goto l1; * x = f(...) ... when != x err = E; goto l; ... * if (x != NULL) S return err; // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: add USB test and measurement class driverGreg Kroah-Hartman2008-10-17
| | | | | | | | | | | | | | | | | | | This driver was originaly written by Stefan Kopp, but massively reworked by Greg for submission. Thanks to Felipe Balbi <me@felipebalbi.com> for lots of work in cleaning up this driver. Thanks to Oliver Neukum <oliver@neukum.org> for reviewing previous versions and pointing out problems. Cc: Stefan Kopp <stefan_kopp@agilent.com> Cc: Marcel Janssen <korgull@home.nl> Cc: Felipe Balbi <me@felipebalbi.com> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Added driver for a Delcom USB 7-segment LED DisplayHarrison Metzger2008-10-17
| | | | | | | | Added basic support for a Delcom USB 7-segment LED Display Signed-off by: Harrison Metzger <harrisonmetz@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Add Oceanic product ID to ftdi_sioVladimir Vukicevic2008-10-17
| | | | | | | | | | | | | | Add Oceanic PID to ftdi_sio driver Oceanic dive computers (such as the VT3 -- http://www.oceanicworldwide.com/p_computers_vt3.html) all use an onboard FTDI serial converter, with the FTDI vid and a PID of 0xf460. The attached patch adds that pid to ftdi_sio; driver connects to my VT3 after that. Signed-off-by: Vladimir Vukicevic <vladimir@pobox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: option.c remove duplicate device ids now supported in hso.cDenis Joseph Barrow2008-10-17
| | | | | | | | Remove duplicate device ids which are now supported by drivers/usb/net/hso.c Signed-off-by: Denis Joseph Barrow <D.Barow@option.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: option: add Ericsson F3507g and Dell 5530Dan Williams2008-10-17
| | | | | | | | Add a few more mobile broadband cards. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds2008-10-17
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (25 commits) staging: at76_usb wireless driver Staging: workaround build system bug Staging: Lindent sxg.c Staging: SLICOSS: Call pci_release_regions at driver exit Staging: SLICOSS: Fix remaining type names Staging: SLICOSS: Fix warnings due to static usage Staging: SLICOSS: lots of checkpatch fixes Staging: go7007 v4l fixes Staging: Fix gcc warnings in sxg Staging: add echo cancelation module Staging: add wlan-ng prism2 usb driver Staging: add w35und wifi driver Staging: USB/IP: add host driver Staging: USB/IP: add client driver Staging: USB/IP: add common functions needed Staging: add the go7007 video driver Staging: add me4000 pci data collection driver Staging: add me4000 firmware files Staging: add sxg network driver Staging: add Alacritech slicoss network driver ... Fixed up conflicts due to taint flags changes and MAINTAINERS cleanup in MAINTAINERS, include/linux/kernel.h and kernel/panic.c.
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-14 09:45:58 -0500