aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
* libata: kill ATA_HORKAGE_DMA_RW_ONLYTejun Heo2007-06-27
| | | | | | | | | | ATA_HORKAGE_DMA_RW_ONLY for TORiSAN is verified to be subset of using DMA for ATAPI commands which aren't aligned to 16 bytes. As libata now doesn't use DMA for unaligned ATAPI commands, the horkage is redundant. Kill it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: use PIO for non-16 byte aligned ATAPI commandsTejun Heo2007-06-27
| | | | | | | | | | | | | | | | | | | | | | | The IDE driver used DMA for ATAPI commands if READ/WRITE command is multiple of sector size or sg command is multiple of 16 bytes. For libata, READ/WRITE sector alignment is guaranteed by the high level driver (sr), so we only have to worry about the 16 byte alignment. This patch makes ata_check_atapi_dma() always request PIO for all data transfer commands which are not multiple of 16 bytes. The following reports are related to this problem. http://bugzilla.kernel.org/show_bug.cgi?id=8605 (confirmed) http://thread.gmane.org/gmane.linux.kernel/476620 (confirmed) https://bugzilla.novell.com/show_bug.cgi?id=229260 (probably) Albert first pointed out the difference between IDE and libata. Kudos to him. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: call ata_check_atapi_dma() with qc better preparedTejun Heo2007-06-27
| | | | | | | | | | In atapi_xlat(), prepare qc better before calling ata_check_atapi_dma() such that ata_check_atapi_dma() can use info from qc. While at it, reformat weird looking if/else block in the function. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: fix infinite EH waiting bugTejun Heo2007-06-27
| | | | | | | | | | When EH gives up after repeated exceptions, it doesn't't clear the PENDING bit on exit which leaves PENDING bit set without EH actually scheduled. This makes ata_port_wait_eh() to wait forever makes rmmod hang on such port. Fix it by clearing the flag. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: fix ata_dev_disable()Tejun Heo2007-06-27
| | | | | | | Fix silly condition check bug in ata_dev_disable(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* pata_it821x: fix section mismatch warningRandy Dunlap2007-06-27
| | | | | | | | | | | Fix section mismatch when CONFIG_HOTPLUG=n (but functions are used for resume): WARNING: drivers/ata/pata_it821x.o(.text+0x3f): Section mismatch: reference to .init.text: (between 'it821x_reinit_one' and 'it821x_program_udma') WARNING: drivers/ata/pata_it821x.o(.text+0x691): Section mismatch: reference to .init.text: (between 'it821x_init_one' and 'it821x_passthru_set_dmamode') Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: remove unused variable from ata_eh_reset()Tejun Heo2007-06-27
| | | | | | | Removed unused variable did_followup_srst from ata_eh_reset(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: be less verbose about hpaTejun Heo2007-06-27
| | | | | | | | | There's no reason to print out hpa related messages when HPA is not active. Kill the unconditional message and add a warning message which is printed if HPA size is smaller than the current size. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: kill non-sense warning messageTejun Heo2007-06-27
| | | | | | | | | prereset() is now allowed to set flag for unsupported reset method. EH layer is responsible for selecting the fallback. Remove non-sense warning message. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: kill the infamous abnormal status messageTejun Heo2007-06-27
| | | | | | | | | | | | | | | | The infamous abnormal status message triggers on not so abnormal cases including empty port and even when it's being triggered on actual errors the info it provides is redundant and out of context - higher level functions will print the info in better safe later anyway. Also, by being triggered all the time, it leads people to think that the abnormality is somehow related to all ATA and system problems they're experiencing and gives owners of healthy systems unfounded doubts about the integrity of the universe. Make it a DPRINTK and save the universe. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* HPT374 is UDMA100 not UDMA133Alan Cox2007-06-27
| | | | | | | Propogate change from drivers/ide Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* x86_64 irq: use mask/unmask and proper locking in fixup_irqs()Siddha, Suresh B2007-06-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Force irq migration path during cpu offline, is not using proper locks and irq_chip mask/unmask routines. This will result in some races(especially the device generating the interrupt can see some inconsistent state, resulting in issues like stuck irq,..). Appended patch fixes the issue by taking proper lock and encapsulating irq_chip set_affinity() with a mask() before and an unmask() after. This fixes a MSI irq stuck issue reported by Darrick Wong. There are several more general bugs in this area(irq migration in the process context). For example, 1. Possibility of missing edge triggered irq. 2. Reliable method of migrating level triggered irq in the process context. We plan to look and close these in the near future. Eric says: In addition even with the fix from Suresh there is still at least one nasty hardware race in fixup_irqs(). However we exercise that code path rarely enough that we are unlikely to hit it in the real world, and that race seems to have existed since the code was merged. And a fix for that is not coming soon as it is an open investigation area if we can fix irq migration to work outside of irq context or if we have to rework the requirements imposed by the generic cpu hotplug and layer on fixup_irqs(). So this may come up again. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Reported-and-tested-by: Darrick Wong <djwong@us.ibm.com> Cc: Andi Kleen <ak@suse.de> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* x86_64: set the irq_chip name for lapicSuresh Siddha2007-06-26
| | | | | | | set the irq_chip name for lapic. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2007-06-26
|\ | | | | | | | | | | | | | | * master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 4449/1: more entries in arch/arm/boot/.gitignore [ARM] 4452/1: Force the literal pool dump before reloc_end [ARM] Update show_regs/oops register format [ARM] Add support for pause_on_oops and display preempt/smp options
| * [ARM] 4449/1: more entries in arch/arm/boot/.gitignoreNicolas Pitre2007-06-25
| | | | | | | | | | Signed-off-by: Nicolas Pitre <npitre@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [ARM] 4452/1: Force the literal pool dump before reloc_endCatalin Marinas2007-06-25
| | | | | | | | | | | | | | | | | | In the arch/arm/boot/compressed/head.S file, the contents of the literal pool accumulated during the relocatable code must be dumped before reloc_end. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [ARM] Update show_regs/oops register formatRussell King2007-06-18
| | | | | | | | | | | | | | | | | | | | | | | | Add the kernel release and version information to the output of show_regs/oops. Add the CPU PSR register. Avoid using printk to output partial lines; always output a complete line. Re-combine the "Control" and "Table + DAC" lines after nommu separated them; we don't want to waste vertical screen space needlessly. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [ARM] Add support for pause_on_oops and display preempt/smp optionsRussell King2007-06-17
| | | | | | | | | | | | | | | | | | | | Add calls to oops_enter() and oops_exit() to __die(), so that things like lockdep know when an oops occurs. Add suffixes to the oops report to indicate whether the running kernel has been built with preempt or smp support. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds2007-06-26
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Count timer interrupts correctly. [MIPS] SMTC and non-SMTC kernel and modules are incompatible [MIPS] EMMA2RH: Disable GEN_RTC, it can't possibly work. [MIPS] Remove a duplicated local variable in test_and_clear_bit() [MIPS] use compat_siginfo in rt_sigframe_n32 [MIPS] 20K: Handle WAIT related bugs according to errata information [MIPS] AP/SP requires shadow registers, auto enable support. [MIPS] Fix pb1500 reg B access [MIPS] Alchemy: Fix wrong cast [MIPS] remove "support for" from system type entry [MIPS] add io_map_base to pci_controller on Cobalt [MIPS] __ucmpdi2 arguments are unsigned long long.
| * | [MIPS] Count timer interrupts correctly.Chris Dearman2007-06-26
| | | | | | | | | | | | | | | Signed-off-by: Chris Dearman <chris@mips.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | [MIPS] SMTC and non-SMTC kernel and modules are incompatibleRalf Baechle2007-06-26
| | | | | | | | | | | | | | | | | | So don't allow mixing. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | [MIPS] EMMA2RH: Disable GEN_RTC, it can't possibly work.Ralf Baechle2007-06-26
| | | | | | | | | | | | | | | | | | | | | | | | Neither rtc_mips_get_time nor rtc_mips_set_time are being initialized by the EMMA2RH setup code, so genrtc at best was a RTC dummy avoiding a few error messages but not providing actual functionality. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | [MIPS] Remove a duplicated local variable in test_and_clear_bit()Atsushi Nemoto2007-06-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix a sparse warning caused by 2c921d07f8c641e691b0dfd80a5cfe14c60ec489 include2/asm/bitops.h:313:23: warning: symbol 'res' shadows an earlier one include2/asm/bitops.h:309:16: originally declared here Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | [MIPS] use compat_siginfo in rt_sigframe_n32Pavel Kiryukhin2007-06-26
| | | | | | | | | | | | | | | Signed-off-by: Pavel Kiryukhin <vksavl@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | [MIPS] 20K: Handle WAIT related bugs according to errata informationRalf Baechle2007-06-26
| | | | | | | | | | | | | | | | | | | | | | | | We used to avoid the WAIT entirely on the 20K but really only need to do this on early revs of the 20K. Without this a 20K was a bit of a power hog. Well, in the lower power power hog category ;-) Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | [MIPS] AP/SP requires shadow registers, auto enable support.Ralf Baechle2007-06-26
| | | | | | | | | | | | | | | | | | Noticed by Chris Dearman (chris@mips.com). Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | [MIPS] Fix pb1500 reg B accessYoichi Yuasa2007-06-26
| | | | | | | | | | | | | | | | | | | | | au_readl() is correct here. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | [MIPS] Alchemy: Fix wrong castYoichi Yuasa2007-06-26
| | | | | | | | | | | | | | | Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | [MIPS] remove "support for" from system type entryYoichi Yuasa2007-06-26
| | | | | | | | | | | | | | | Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | [MIPS] add io_map_base to pci_controller on CobaltYoichi Yuasa2007-06-26
| | | | | | | | | | | | | | | Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | [MIPS] __ucmpdi2 arguments are unsigned long long.Ralf Baechle2007-06-26
| | | | | | | | | | | | | | | | | | Reported by Eugene Surovegin <ebs@ebshome.net>. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | | Merge branch 'merge' of ↵Linus Torvalds2007-06-26
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Fix subtle FP state corruption bug in signal return on SMP [POWERPC] Fix VDSO gettimeofday() when called with NULL struct timeval [POWERPC] Update defconfigs [POWERPC] Update g5_defconfig
| * | | [POWERPC] Fix subtle FP state corruption bug in signal return on SMPPaul Mackerras2007-06-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes a bug which can cause corruption of the floating-point state on return from a signal handler. If we have a signal handler that has used the floating-point registers, and it happens to context-switch to another task while copying the interrupted floating-point state from the user stack into the thread struct (e.g. because of a page fault, or because it gets preempted), the context switch code will think that the FP registers contain valid FP state that needs to be copied into the thread_struct, and will thus overwrite the values that the signal return code has put into the thread_struct. This can occur because we clear the MSR bits that indicate the presence of valid FP state after copying the state into the thread_struct. To fix this we just move the clearing of the MSR bits to before the copy. A similar potential problem also occurs with the Altivec state, and this fixes that in the same way. Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | [POWERPC] Fix VDSO gettimeofday() when called with NULL struct timevalTony Breeds2007-06-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Consider the prototype for gettimeofday(): int gettimofday(struct timeval *tv, struct timezone *tz); Although it is valid to call with /either/ tv or tz being NULL, and the C version of sys_gettimeofday() supports this, the current version of gettimeofday() in the VDSO will SEGV if called with a NULL tv. This adds a check for tv being NULL so that it doesn't SEGV. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | [POWERPC] Update defconfigsPaul Mackerras2007-06-26
| | | | | | | | | | | | | | | | Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | [POWERPC] Update g5_defconfigwill schmidt2007-06-26
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update the g5_defconfig with default settings. This is to keep things up to date, and specifically to ensure that the CONFIG_MACINTOSH_DRIVERS option is enabled. This also turns on CONFIG_MSI. Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com> cc: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* | | Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds2007-06-26
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: ftdio_sio: New IPlus device ID USB: add new device id to option driver USB: fix race leading to use after free in io_edgeport USB: usblcd doesn't limit memory consumption during write USB: memory leak in iowarrior.c USB: ti serial driver sleeps with spinlock held USB: g_file_storage: call allow_signal()
| * | | USB: ftdio_sio: New IPlus device IDLuiz Fernando N. Capitulino2007-06-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reported by Grzegorz Chimosz <gchimi@gmail.com> Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | USB: add new device id to option driverAlexander Gattin2007-06-26
| | | | | | | | | | | | | | | | | | | | | | | | Cc: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | USB: fix race leading to use after free in io_edgeportOliver Neukum2007-06-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | usb_unlink_urb() is asynchronous, therefore an URB's buffer may not be freed without waiting for the completion handler. This patch switches to usb_kill_urb(), which is synchronous. Thanks to Alan for making me look at the remaining users of usb_unlink_urb() Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Al Borchers <alborchers@steinerpoint.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | USB: usblcd doesn't limit memory consumption during writeOliver Neukum2007-06-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | usblcd currently has no way to limit memory consumption by fast writers. This is a security problem, as it allows users with write access to this device to drive the system into oom despite resource limits. Here's the fix taken from the modern skeleton driver. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | USB: memory leak in iowarrior.cOliver Neukum2007-06-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | this is a classical memory leak in the ioctl handler. The buffer is simply never freed. This fixes it the obvious way. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | USB: ti serial driver sleeps with spinlock heldOliver Neukum2007-06-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | you are submitting an URB with GFP_KERNEL holding a spinlock. In this case the spinlock can be dropped earlier. Signed-off-by: Oliver Neukum <oneukum@suse.de> Cc: Al Borchers <alborchers@steinerpoint.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | USB: g_file_storage: call allow_signal()Oleg Nesterov2007-06-26
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | New changes in the signal-handling code require compensating changes in g_file_storage. This patch (as913) by Oleg Nesterov makes the code use allow_signal() instead of sigprocmask(). From: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* / / fix nmi_watchdog=2 bootup hangBjörn Steinbrink2007-06-25
|/ / | | | | | | | | | | | | | | | | wrmsrl() is broken, dropping the upper 32bits of the value to be written. This broke the NMI watchdog on AMD hardware. (and it probably broke other code too.) Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Linus 2.6.22-rc6v2.6.22-rc6Linus Torvalds2007-06-24
| |
* | FUTEX: Restore the dropped ERSCH fixThomas Gleixner2007-06-24
| | | | | | | | | | | | | | | | | | | | | | The return value of futex_find_get_task() needs to be -ESRCH in case that the search fails. This was part of the original futex fixes and got accidentally dropped, when the futex-tidy-up patch was split out. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Stable Team <stable@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge branch 'master' of ↵Linus Torvalds2007-06-24
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NET]: Make skb_seq_read unmap the last fragment [NET]: Re-enable irqs before pushing pending DMA requests [TCP] tcp_read_sock: Allow recv_actor() return return negative error value. [PPP]: Fix osize too small errors when decoding mppe. [PPP]: Revert 606f585e363527da9feaed79465132c0c661fd9e [TIPC]: Fix infinite loop in netlink handler [SKBUFF]: Fix incorrect config #ifdef around skb_copy_secmark [IPV4]: include sysctl.h from inetdevice.h [IPV6] NDISC: Fix thinko to control Router Preference support. [NETFILTER]: nfctnetlink: Don't allow to change helper [NETFILTER]: nf_conntrack_sip: add missing message types containing RTP info
| * | [NET]: Make skb_seq_read unmap the last fragmentOlaf Kirch2007-06-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Having walked through the entire skbuff, skb_seq_read would leave the last fragment mapped. As a consequence, the unwary caller would leak kmaps, and proceed with preempt_count off by one. The only (kind of non-intuitive) workaround is to use skb_seq_read_abort. This patch makes sure skb_seq_read always unmaps frag_data after having cycled through the skb's paged part. Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | [NET]: Re-enable irqs before pushing pending DMA requestsShannon Nelson2007-06-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This moves the local_irq_enable() call in net_rx_action() to before calling the CONFIG_NET_DMA's dma_async_memcpy_issue_pending() rather than after. This shortens the irq disabled window and allows for DMA drivers that need to do their own irq hold. Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-26 17:05:58 -0500