aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
* [SCSI] sym2: fix section mismatch warningRandy Dunlap2008-01-11
| | | | | | | | | Fix section mismatch warning: WARNING: vmlinux.o(.text+0x1ff3a2): Section mismatch: reference to .exit.text:sym2_remove (between 'sym2_io_error_detected' and 'sym_xpt_done') Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] lpfc: minor cleanupsAdrian Bunk2008-01-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch contains the following minor cleanups: - make the following needlessly global functions static: - lpfc_els.c: lpfc_register_new_vport() - lpfc_els.c: lpfc_issue_els_fdisc() - lpfc_els.c: lpfc_issue_fabric_iocb() - lpfc_els.c: lpfc_fabric_abort_vport() - lpfc_hbadisc.c: lpfc_dev_loss_tmo_handler() - lpfc_hbadisc.c: lpfc_mbx_cmpl_clear_la() - lpfc_hbadisc.c: lpfc_disc_flush_list() - lpfc_hbadisc.c: __lpfc_find_node() - lpfc_init.c: lpfc_hb_timeout() - lpfc_init.c: lpfc_block_mgmt_io() - lpfc_sli.c: __lpfc_sli_release_iocbq() - lpfc_sli.c: lpfc_sli_next_hbq_slot() - lpfc_sli.c: lpfc_sli_hbqbuf_init_hbqs() - lpfc_sli.c: lpfc_sli_hbqbuf_find() - lpfc_sli.c: __lpfc_sli_issue_iocb() - #if 0 the following unused global functions: - lpfc_els.c: lpfc_fabric_abort_flogi() - lpfc_hbadisc.c: lpfc_find_node() - lpfc_hbadisc.c: lpfc_findnode_rpi() - remove the unused exports Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: James Smart <James.Smart@Emulex.Com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] sd,sr: add early detection of medium not presentJames Bottomley2008-01-11
| | | | | | | | | The current scsi_test_unit_ready() is updated to return sense code information (in struct scsi_sense_hdr). The sd and sr drivers are changed to interpret the sense code return asc 0x3a as no media and adjust the device status accordingly. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] BUG_ON() impossible condition in sg list countingRusty Russell2008-01-11
| | | | | | | | | | | If blk_rq_map_sg wrote more than was allocated in the scatterlist, BUG_ON() is probably the right thing to do. [jejb: rejections fixed up] Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] tgt: fix build when dprintk is definedRandy Dunlap2008-01-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix scsi_tgt_lib build when dprintk is defined: Also fix accessors problem when dprintk is defined drivers/scsi/scsi_tgt_lib.c: In function 'scsi_tgt_cmd_destroy': drivers/scsi/scsi_tgt_lib.c:183: warning: format '%lu' expects type 'long unsigned int', but argument 6 has type 'unsigned int' drivers/scsi/scsi_tgt_lib.c: In function 'scsi_tgt_cmd_done': drivers/scsi/scsi_tgt_lib.c:330: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'unsigned int' drivers/scsi/scsi_tgt_lib.c: In function 'scsi_tgt_transfer_response': drivers/scsi/scsi_tgt_lib.c:345: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'unsigned int' drivers/scsi/scsi_tgt_lib.c: In function 'scsi_tgt_init_cmd': drivers/scsi/scsi_tgt_lib.c:368: warning: format '%lu' expects type 'long unsigned int', but argument 6 has type 'unsigned int' drivers/scsi/scsi_tgt_lib.c: In function 'scsi_tgt_kspace_exec': drivers/scsi/scsi_tgt_lib.c:499: warning: format '%lu' expects type 'long unsigned int', but argument 9 has type 'unsigned int' drivers/scsi/scsi_tgt_lib.c: In function 'scsi_tgt_kspace_it_nexus_rsp': drivers/scsi/scsi_tgt_lib.c:620: error: 'mid' undeclared (first use in this function) drivers/scsi/scsi_tgt_lib.c:620: error: (Each undeclared identifier is reported only once drivers/scsi/scsi_tgt_lib.c:620: error: for each function it appears in.) make[2]: *** [drivers/scsi/scsi_tgt_lib.o] Error 1 [tomo: > - dprintk("%d %d %llx\n", host_no, result, (unsigned long long) mid); > + dprintk("%d %d\n", host_no, result); 'mid' is a typo. I wanted to do: dprintk("%d %d %llx\n", host_no, result, (unsigned long long)itn_id); The rest looks ok. Thanks, ] Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] aacraid: don't assign cpu_to_le32(int) to u8Christoph Hellwig2008-01-11
| | | | | | | | | | | | | | | | | | | | | On Wed, Nov 07, 2007 at 01:51:44PM -0500, Salyzyn, Mark wrote: > Christoph Hellwig [mailto:hch@infradead.org] sez: > > Did anyone run the driver through sparse to see if we have > > more issues like this? > > There are some warnings from sparse, none like this one. I will deal > with the warnings ... Actually there are a lot of endianess warnings, fortunately most of them harmless. The patch below fixes all of them up (including the ones in the patch I replied to), except for aac_init_adapter which is really odd and I don't know what to do. [jejb fixed up rejections and checkpatch issues] Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Mark Salyzyn <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Update version number to 8.02.00-k6.Andrew Vasquez2008-01-11
| | | | | Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Properly handle Vport state-change-notifications.Shyam Sundar2008-01-11
| | | | | | | | | | | | Drivers do SCRs for each Vport. When something changes in the fabric, firmware generates one interrupt for each RSCN. Based on the current implementation, in each case, we make recursive calls to handle RSCN for physical and each subsequent virtual ports. The fix is to also take into consideration the vp_idx, which is set by the firmware to indicate the vport the RSCN was meant for. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Correct NPIV support for recent ISPs.Andrew Vasquez2008-01-11
| | | | | | | | | | Firmware will export to software the maximum number of vports supported for any given firmware version and ISP type. Use this information rather than the current hardcoding of limitations within the driver. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Don't explicitly read mbx registers while processing a ↵Andrew Vasquez2008-01-11
| | | | | | | | | | | | | | system-error. Callers of qla2x00_async_event() already populate the mb[] array upon invocation, doing so via the appropriate mailbox register accessors. The stale codes removed are leftover-bits kept during the FWI2 transition. Though relatively benign, the extra-reads are not valid for FWI2 boards (ISP24xx and above) and peek into the incorrect regions of registers. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] ibmvscsi: requeue while CRQ closedRobert Jennings2008-01-11
| | | | | | | | | | | | | | | | | | | | | | | | CRQ send errors that return with H_CLOSED should return with SCSI_MLQUEUE_HOST_BUSY until firmware alerts the client of a CRQ transport event. The transport event will either reinitialize and requeue the requests or fail and return IO with DID_ERROR. To avoid failing the eh_* functions while re-attaching to the server adapter this will retry for a period of time while ibmvscsi_send_srp_event returns SCSI_MLQUEUE_HOST_BUSY. In ibmvscsi_eh_abort_handler() the loop includes the search of the event list. The lock on the hostdata is dropped while waiting to try again after failing ibmvscsi_send_srp_event. The event could have been purged if a login was in progress when the function was called. In ibmvscsi_eh_device_reset_handler() the loop includes the call to get_event_struct() because a failing call to ibmvscsi_send_srp_event() will have freed the event struct. Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] docbook and kernel-doc updatesRandy Dunlap2008-01-11
| | | | | | | | | | | - Change title to remove "Mid-Layer" since the doc is about all of the SCSI layers. - Use "SCSI" instead of "scsi" in docbook text. - Use "*/" to end kernel-doc notation blocks. - A few other minor typo fixes. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] kernel-doc: use correct function nameRandy Dunlap2008-01-11
| | | | | | | Use correct function name in kernel-doc. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] boot options: correct option name and tell where to find docs for itRandy Dunlap2008-01-11
| | | | | | | | | Minor corrections and additions to 'scsi_logging_level', as pointed out by Chuck Ebbert. Also point out the IBM S390-tools 'scsi_logging_level' script. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] move single_lun flag from scsi_device to scsi_targetTony Battersby2008-01-11
| | | | | | | | | | | | | | | | | | Some SCSI tape medium changers that need the BLIST_SINGLELUN flag have the medium changer at one LUN and the tape drive at a different LUN. The inquiry string of the tape drive may be different from that of the medium changer. In order for single_lun to be effective, every scsi_device under a given scsi_target must have it set. This means that there needs to be a blacklist entry for BOTH the medium changer AND the tape drive, which is impractical because some medium changers may be paired with a variety of different tape drive models. It makes more sense to put the single_lun flag in scsi_target instead of scsi_device, which causes every device at a given target ID to inherit the single_lun flag from one LUN. This makes it possible to blacklist just the medium changer and not the tape drive. Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] megaraid_sas: Update version and changelogbo yang2008-01-11
| | | | | | | Update version and changelog Signed-off-by: Bo Yang <bo.yang@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] megaraid_sas: support for poll_mode_io (reduced interrupt)bo yang2008-01-11
| | | | | | | | | | | | | Added module parameter "poll_mode_io" to support for "polling" (reduced interrupt operation). In this mode, IO completion interrupts are delayed. At the end of initiating IOs, the driver schedules for cmd completion if there are pending cmds. A timer-based interrupt has also been added to prevent IO completion from being delayed indefinitely in the case that no new IOs are initiated. Some formatting issues in resume, suspend comment block also corrected Signed-off-by: Bo Yang <bo.yang@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] megaraid_sas: call cmd completion from resetbo yang2008-01-11
| | | | | | | Driver will call cmd completion routine from Reset path without waiting for cmd completion from isr context. Signed-off-by: Bo Yang <bo.yang@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] megaraid_sas: use unsigned long for sense_buff ptrbo yang2008-01-11
| | | | | | | MegaRAID utilities expect sense_buff to be of type unsigned long. Signed-off-by: Bo Yang <bo.yang@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] megaraid_sas: check max_sgl reported by FW for setting ↵bo yang2008-01-11
| | | | | | | | | | | | | | | | max_sectors_per_req 1. Setting the max_sectors_per_req based on max SGL supported by the FW. Prior versions calculated this value from controller info's max_sectors_1, max_sectors_2. For certain controllers/FW, this was resulting in a value greater than max SGL supported by the FW. Now we take the min of max sgl from FW and max_sectors calculation. 2. Increased MFI_POLL_TIMEOUT_SECS to 60 seconds from 10. FW may take a max of 60 seconds to respond to the INIT cmd. Signed-off-by: Bo Yang <bo.yang@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] megaraid_sas: add hibernation supportbo yang2008-01-11
| | | | | | | Adding hibernation support. suspend, resume routine implemented. Signed-off-by: Bo Yang <bo.yang@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] 3w-9xxx: fix abysmal write performance on some motherboardsTony Battersby2008-01-11
| | | | | | | | | | | | | | | | | | | | | | | The 3ware 9500S-8 SATA RAID controller exhibits terrible write performance when PCI memory-write-and-invalidate is disabled. This is easy to demonstrate by replacing pci_try_set_mwi() in the patch below with pci_clear_mwi(). My benchmarks show the following: MWI disabled: 15 MB/s write, 330 MB/s read MWI enabled: 240 MB/s write, 330 MB/s read Most motherboards will enable MWI without the driver having to set it explicitly, so most people probably wouldn't encounter this problem. For the few motherboards that don't enable it, this patch could give a 16x performance improvement for writing. This issue does not seem to affect the 9550SX controller, but the patch doesn't hurt it either. I haven't tested any of the other 3ware controllers. Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Acked-by: adam radford <aradford@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] libsas: Fix various sparse complaintsDarrick J. Wong2008-01-11
| | | | | | | | Annotate sas_queuecommand with locking details, and clean up a few more sparse warnings about static/non-static declarations. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] libsas: Convert sas_proto users to sas_protocolDarrick J. Wong2008-01-11
| | | | | | | | | sparse complains about the mixing of enums in libsas. Since the underlying numeric values of both enums are the same, combine them to get rid of the warning. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] megaraid_sas: Convert aen_mutex to the mutex APIMatthias Kaehlcke2008-01-11
| | | | | | Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Acked-by: Bo Yang <Bo.Yang@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] imm: convert to accessors and !use_sg cleanupBoaz Harrosh2008-01-11
| | | | | | | | | | - convert to accessors and !use_sg cleanup - Not ready for sg-chaining Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Tested-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] ppa: convert to accessors and !use_sg cleanupBoaz Harrosh2008-01-11
| | | | | | | | | - convert to accessors and !use_sg cleanup Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Tested-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] DocBook scsi_midlayer.tmpl->scsi.tmplJames Bottomley2008-01-11
| | | | Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] Add Documentation and integrate into docbook buildRob Landley2008-01-11
| | | | | | | | | | | Add Documentation/DocBook/scsi_midlayer.tmpl, add to Makefile, and update lots of kerneldoc comments in drivers/scsi/*. Updated with comments from Stefan Richter, Stephen M. Cameron, James Bottomley and Randy Dunlap. Signed-off-by: Rob Landley <rob@landley.net> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: Reduce flood on hba traceChristof Schmitt2008-01-11
| | | | | | | | | | | | | | | Remove tracing for request with a "qualifier" field set in the response. The protocol status qualifier now contains measurement data for "good" commands, so this check would trace every response by default. The fix is to simply remove the "qual" tracing: The responses with an interesting status are also traced as "ferr" or "perr" and all responses can be traced as "norm" with a higher trace level. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: Fix deadlock when adding invalid LUNChristof Schmitt2008-01-11
| | | | | | | | | | | | | | | When adding an invalid LUN, there is a deadlock between the add via scsi_scan_target and the slave_destroy handler: The handler waits for the scan to complete, but for an invalid unit, scsi_scan_target directly calls the slave_destroy handler. Fix the deadlock by removing the wait in the slave_destroy handler, it was not necessary anyway. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: Remove SCSI devices when removing complete adapterChristof Schmitt2008-01-11
| | | | | | | | | | | The common I/O layer can call remove a handler to inform zfcp that a device disappeared. The handler zfcp_ccw_remove then removes all unit, port and the adapter data structures. Removing the units requires that the SCSI devices are removed first. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: Specify waiting times in ERP in secondsChristof Schmitt2008-01-11
| | | | | | | | | | It is not necessary to use jiffies or milliseconds to specify waiting times that last a couple of seconds. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: Use also port and adapter to identify unit in messages.Christof Schmitt2008-01-11
| | | | | | Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: Remove unnecessary eh_bus_reset_handler callbackChristof Schmitt2008-01-11
| | | | | | | | | | | The callback function used by zfcp always returns success, which is an indication for the SCSI midlayer to stop error handling. Remove the bus_reset callback, since the same function will be called via the host_reset callback. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] aacraid: forced reset overrideSalyzyn, Mark2008-01-11
| | | | | | | | | | | | | | | | | | | | | | Some of our vendors have requested that our adapters ignore the hardware reset attempts during recovery and have enforced this with changes in Adapter Firmware. Some of our customers have requested the option to be able to reset the adapter under adverse adapter failure, we even had a few defects reported here considering it a regression that the Adapter could not be reset. This patch addresses this dichotomy. The user can force the adapter to be reset if it supports the IOP_RESET_ALWAYS command, in cases where the adapter has been programmed to ignore the reset, by setting the aacraid.check_reset parameter to a value of -1. The driver will not reset an Adapter that does not support the reset command(s). This patch also fixes and cleans up some of the logic associated with resetting the adapter. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] NCR5380 family: convert to accessors & !use_sg cleanupBoaz Harrosh2008-01-11
| | | | | | | | | | | - This patch depends on: NCR5380: Use scsi_eh API for REQUEST_SENSE invocation - convert to accessors and !use_sg cleanup - FIXME: Not sg-chain ready look for ++cmd->SCp.buffer Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] wd7000: proper fix for boards without sg supportBoaz Harrosh2008-01-11
| | | | | | | | | | | - code used to set sg_tablesize to zero for board revision less than 6. This is no longer supported, therefore I use sg_tablesize=1 and open code the sg handling for that case. - Get rid of use of SG_NONE which will be removed soon. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] atp870u: convert to accessors and !use_sg cleanupBoaz Harrosh2008-01-11
| | | | | | | | | | - convert to accessors and !use_sg cleanup - Probably not ready for sg-chaining Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Acked-by: Christoph Hellwig <hch@infradead.org> Cc: jameshsu <jameshsu@acard.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] scsi_debug: convert to use the data buffer accessorsBoaz Harrosh2008-01-11
| | | | | | | | | | - remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Acked-by: Douglas Gilbert <dougg@torque.net> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] isd200: use one-element sg list in issuing commandsBoaz Harrosh2008-01-11
| | | | | | | | | | | | | | | | | | | | | - This patch should be commited before: usb: transport - convert to accessors and !use_sg code path removal - isd200_action() was still using direct liniar pointers in issuing commands to the USB transport level. This is no longer supported, use one-element scatterlist instead. - Adjustment of command's length in the case of scsi-to-ata translation is now restored before return to queuecommand, since other wise it can leak BIOs. - isd200_action() return Error on unknown requests. Used to print an error but still try to send garbage cdb. - convert few places to scsi data accessors. - Todo: This file will need to be changed when scsi_cmnd changes to scsi_data_buffer or any other solution. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Acked-by: Matthew Dharm <mdharm-scsi@one-eyed-alien.net> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] usb: transport - convert to accessors and !use_sg code path removalBoaz Harrosh2008-01-11
| | | | | | | | | | | | | | | | | | | | - This patch depends on: usb: transport.c use scsi_eh API in REQUEST_SENSE execution - Use scsi data accessors and remove of !use_sg code path. - New usb_stor_bulk_srb() for use by drivers [jejb: updated with corrective fix. had a bug in residual handling in the new usb_stor_bulk_srb() function. Found by Gabriel C. in -mm tree. Tested-by: Gabriel C <nix.or.die@googlemail.com> ] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Acked-by: Matthew Dharm <mdharm-scsi@one-eyed-alien.net> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] usb: shuttle_usbat - convert to accessors and !use_sg code path removalBoaz Harrosh2008-01-11
| | | | | | | | | | - functions that received char* but where passed scatterlist* mostly were changed to receive void* - Use scsi data accessors and remove of !use_sg code path Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Acked-by: Matthew Dharm <mdharm-scsi@one-eyed-alien.net> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] usb: freecom & sddr09 - convert to accessors and !use_sg cleanupBoaz Harrosh2008-01-11
| | | | | | | | | - Use scsi data accessors and remove of !use_sg code path - This patch is dependent on cleanup patch to usb transport.c/h Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Acked-by: Matthew Dharm <mdharm-scsi@one-eyed-alien.net> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] usb: protocol - convert to accessors and !use_sg code path removalBoaz Harrosh2008-01-11
| | | | | | | | - Use scsi data accessors and remove of !use_sg code path Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Acked-by: Matthew Dharm <mdharm-scsi@one-eyed-alien.net> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] seagate: Remove driverBoaz Harrosh2008-01-11
| | | | | | | | | | - Apparently no one wonts this driver, and no one is willing to fix it for future changes to SCSI. So remove it, and if someone wants it in the future He can revive it with the needed fixes. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] psi240i: remove driverBoaz Harrosh2008-01-11
| | | | | | | | | | | | The psi240i driver is still written for cmnd->request_buffer as a char pointer to actual data. There was never any attempt to use the scatterlist option. - remove all source files (3) from drivers/scsi - Remove from Makefile and Kconfig Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] in2000: convert to accessors and !use_sg cleanupBoaz Harrosh2008-01-11
| | | | | | | - convert to accessors and !use_sg cleanup Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qlogicpti: convert to accessors and !use_sg cleanupBoaz Harrosh2008-01-11
| | | | | | | - convert to accessors and !use_sg cleanup Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] wd33c93: convert to accessors and !use_sg cleanupBoaz Harrosh2008-01-11
| | | | | | | - convert to accessors and !use_sg cleanup Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-23 23:01:59 -0500