aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
* veth: move loopback logic to common locationArnd Bergmann2009-11-26
| | | | | | | | | | | | | | | The veth driver contains code to forward an skb from the start_xmit function of one network device into the receive path of another device. Moving that code into a common location lets us reuse the code for direct forwarding of data between macvlan ports, and possibly in other drivers. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* via-velocity: Bump versionSimon Kagstrom2009-11-26
| | | | | Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* via-velocity: Set tx checksum from ethtool instead of module parameterSimon Kagstrom2009-11-26
| | | | | | | Defaults to on (as before). Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* via-velocity: Re-enable transmit scatter-gather supportSimon Kagstrom2009-11-26
| | | | | | | | | | | | The velocity hardware can handle up to 7 memory segments. This can be turned on and off via ethtool. The support was removed in commit 83c98a8cd04dd0f848574370594886ba3bf56750 but is re-enabled and cleaned up here. It's off by default. Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* via-velocity: Change DMA_LENGTH_DEF (from the VIA driver)Simon Kagstrom2009-11-26
| | | | | | | | | The VIA driver has changed the default for the DMA_LENGTH_DEF parameter. Together with adaptive interrupt supression and NAPI support, this improves performance quite a bit Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* via-velocity: Implement NAPI supportSimon Kagstrom2009-11-26
| | | | | | | | | | This patch adds NAPI support for VIA velocity. The new velocity_poll function also pairs tx/rx handling twice which improves perforamance on some workloads (e.g., netperf UDP_STREAM) significantly (that part is from the VIA driver). Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* via-velocity: Add ethtool interrupt coalescing supportSimon Kagstrom2009-11-26
| | | | | | | | | (Partially from the upstream VIA driver). Tweaking the number of frames-per-interrupt and timer-until-interrupt can reduce the amount of CPU work quite a lot. Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* via-velocity: Correct 64-byte alignment for rx buffersSimon Kagstrom2009-11-26
| | | | | | | | | | | | | | | | | | | | | (From the VIA driver). The current code does not guarantee 64-byte alignment since it simply does int add = skb->data & 63; skb->data += add; (via skb_reserve). So for example, if the skb->data address would be 0x10, this would result in 32-byte alignment (0x10 + 0x10). Correct by adding 64 - (skb->data & 63) instead. Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: move PHY regs tables to .rodataAlexey Dobriyan2009-11-25
| | | | | | | | | | | As side effect, consume less stack. -rtl8169_get_mac_version [vmlinux]: 432 -rtl8169_init_one [vmlinux]: 376 +rtl8169_init_one [vmlinux]: 136 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* xfrm: Add SHA384 and SHA512 HMAC authentication algorithms to XFRMMartin Willi2009-11-25
| | | | | | | | | These algorithms use a truncation of 192/256 bits, as specified in RFC4868. Signed-off-by: Martin Willi <martin@strongswan.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* xfrm: Use the user specified truncation length in ESP and AHMartin Willi2009-11-25
| | | | | | | | Instead of using the hardcoded truncation for authentication algorithms, use the truncation length specified on xfrm_state. Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* xfrm: Store aalg in xfrm_state with a user specified truncation lengthMartin Willi2009-11-25
| | | | | | | | | | | | | | Adding a xfrm_state requires an authentication algorithm specified either as xfrm_algo or as xfrm_algo_auth with a specific truncation length. For compatibility, both attributes are dumped to userspace, and we also accept both attributes, but prefer the new syntax. If no truncation length is specified, or the authentication algorithm is specified using xfrm_algo, the truncation length from the algorithm description in the kernel is used. Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* xfrm: Define new XFRM netlink auth attribute with specified truncation bitsMartin Willi2009-11-25
| | | | | | | | | | The new XFRMA_ALG_AUTH_TRUNC attribute taking a xfrm_algo_auth as argument allows the installation of authentication algorithms with a truncation length specified in userspace, i.e. SHA256 with 128 bit instead of 96 bit truncation. Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: convert /proc/net/rt_acct to seq_fileAlexey Dobriyan2009-11-25
| | | | | | | | | | | | Rewrite statistics accumulation to be in terms of structure fields, not raw u32 additions. Keep them in same order, though. This is the last user of create_proc_read_entry() in net/, please NAK all new ones as well as all new ->write_proc, ->read_proc and create_proc_entry() users. Cc me if there are problems. :-) Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: use net_eq to compare netsOctavian Purdila2009-11-25
| | | | | | | | | | | | | | | | | | | | | | | Generated with the following semantic patch @@ struct net *n1; struct net *n2; @@ - n1 == n2 + net_eq(n1, n2) @@ struct net *n1; struct net *n2; @@ - n1 != n2 + !net_eq(n1, n2) applied over {include,net,drivers/net}. Signed-off-by: Octavian Purdila <opurdila@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2009-11-24
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
| * ath9k: set ps_default as falseJohn W. Linville2009-11-23
| | | | | | | | | | | | | | | | | | | | | | Copied from original one-line patch here: http://bugzilla.kernel.org/show_bug.cgi?id=14267#c26 (This is for 2.6.33 and beyond, where the bool was changed to a flag by "cfg80211: convert bools into flags". -- JWL) Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ssb: Fix range check in sprom writeMichael Buesch2009-11-23
| | | | | | | | | | | | | | | | | | | | | | | | The range check in the sprom image parser hex2sprom() is broken. One sprom word is 4 hex characters. This fixes the check and also adds much better sanity checks to the code. We better make sure the image is OK by doing some sanity checks to avoid bricking the device by accident. Signed-off-by: Michael Buesch <mb@bu3sch.de> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ssb: Fix SPROM writingMichael Buesch2009-11-23
| | | | | | | | | | | | | | | | | | | | | | The SPROM writing routines were broken since we rewrote the suspend handling on wireless devices, because SPROM writing depended on suspend. This patch changes it and freezes devices with the driver remove(), probe() callbacks instead. This also simplifies the whole logics a lot. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * rndis_wlan: disable stall workaroundJussi Kivilinna2009-11-23
| | | | | | | | | | | | | | | | | | Stall workaround doesn't work with bcm4320a devices like with bcm4320b. This workaround actually causes more stalls/device freeze on bcm4320a. Therefore disable stall workaround by default. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * rndis_wlan: fix buffer overflow in rndis_query_oidJussi Kivilinna2009-11-23
| | | | | | | | | | | | | | | | | | | | | | rndis_query_oid overwrites *len which stores buffer size to return full size of received command and then uses *len with memcpy to fill buffer with command. Ofcourse memcpy should be done before replacing buffer size. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mac80211: Fix missing kernel-doc notationJaswinder Singh Rajput2009-11-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the following htmldocs warnings: Warning(net/mac80211/sta_info.h:322): No description found for parameter 'drv_unblock_wk' Warning(net/mac80211/sta_info.h:322): No description found for parameter 'drv_unblock_wk' Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: John W. Linville <linville@tuxdriver.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: remove reset led_tpt from iwl_leds_init()Wey-Yi Guy2009-11-23
| | | | | | | | | | | | | | | | | | | | | | | | | | Current blinking rate is calculated based on the difference between current tx/rx byte counts and priv->led_tpt. priv->led_tpt should not get reset in iwl_leds_init(), this function can be called by bring interface "up" or "down", or when uCode sysassert occurred. resetting the led_tpt parameter will introduce incorrect led blinking behavior. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: change message for cmd queue full errorWey-Yi Guy2009-11-23
| | | | | | | | | | | | | | | | | | Change error message for command queue full Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Acked-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: print limited number of event log when uCode errorWey-Yi Guy2009-11-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To help iwlagn uCode debugging, event log will dump to syslog when driver detect uCode error occurred, but this only happen when compile with CONFIG_IWLWIFI_DEBUG and debug flag is enabled; which is not always the case. Also, there is another problem, if the flag is set, the entire event log buffer will be dump to syslog, it can flood the syslog and make it very difficult to debug the problem. Change the default to only dump last 20 entries of event log to syslog unless the following condition meets: 1. both compile with CONFIG_IWLWIFI_DEBUG and debug flag is enabled, and then dump the entire event buffer to syslog. 2. dump event log request from debugfs Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Acked-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: Tell the ucode immediately when association state changesJay Sternberg2009-11-23
| | | | | | | | | | | | | | | | | | | | | | | | When we get a state change of associated or not, we need to tell the ucode via the RX_ON command using the filter flags. This will prevent the ucode from sending any packets when not associated, specifically not sending NULL QOS packets after a deauthentication which causes the AP to repeatedly send deauth's in some situations. Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: dump error log when uCode error occurredWey-Yi Guy2009-11-23
| | | | | | | | | | | | | | | | | | | | | | | | | | uCode error log contain information as to what the error was and where it occurred necessary to debug any uCode issues. Always log the information without special debug flag, this can help to capture the important information when error happened. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Acked-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: by default, dump entire sram data portionWey-Yi Guy2009-11-23
| | | | | | | | | | | | | | | | | | | | | | For "sram" debugfs file, if user did not specify the offset and length, dump the entire data portion of sram by default. Data portion is 0x800000 - 0x80ffff, but the actual data size is known to the driver from the ucode file. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: update supported PCI_ID list for 5xx0 seriesWey-Yi Guy2009-11-23
| | | | | | | | | | | | | | | | | | | | | | | | Update the PCI_ID list for 5xx0 series. Remove all the PCI_IDs which never made into production or not longer in production. Also make sure the supported bands(a/b/g/n) match specified PCI_IDs Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: separate IO tracingJohannes Berg2009-11-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Since IO tracing is usually not needed and generates a lot of data, separate it into its own trace system so that we can always enable iwlwifi:* and not have to worry about getting too much data. If IO tracing is then really needed we can enable iwlwifi_io:* in addition and get that data. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: fix reserved2 field in iwl4965_addstaWey-Yi Guy2009-11-23
| | | | | | | | | | | | | | | | reserved2 field in "struct iwl4965_addsta_cmd" is __le16. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: dynamically allocate buffer for sram debugfs fileWey-Yi Guy2009-11-23
| | | | | | | | | | | | | | | | | | Dynamically allocate memory for dumping SRAM based on the length of memory to be displayed. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: increase tx_queue debugfs buffer sizeWey-Yi Guy2009-11-23
| | | | | | | | | | | | | | | | | | For tx_queue, need to increase the buffer size allocated for it, so all the queues information can be displayed Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: set read/write permission for debugfs filesWey-Yi Guy2009-11-23
| | | | | | | | | | | | | | | | | | Set the correct Read/Write file permission for iwlwifi debugfs files based on the functionality of the files Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwl3945: removed unused struct and definitionsReinette Chatre2009-11-23
| | | | | | | | | | Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: reset led_tpt when clear tx/rx traffic byte countsWey-Yi Guy2009-11-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LED blink rate is based on the traffic load, when tx/rx traffic counts got reset, we also need to reset the led_tpt to prevent incorrect blink rate being calculated. Merge both clear_tx_statistics() and clear_rx_statistics() into single clear_traffic_statistics() function, when reset the traffic byte counts, both tx and rx need to be reset at the same time, to make sure calculated the correct led blink rate. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: set sm_ps_mode as part of cfg parametersWey-Yi Guy2009-11-23
| | | | | | | | | | | | | | | | | | | | | | | | | | Setting "Spatial multiplexing Power Save" as part of per device configuration parameter. Report to uCode based on priv->conf setting, so driver can have more control of how different devices should operate in power save mode. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: control led while update tx/rx bytes countsWey-Yi Guy2009-11-23
| | | | | | | | | | | | | | | | | | | | | | | | | | LED blinking rate is based on tx/rx traffic, the most reasonable place to do it is after update the traffic byte counts This fixes the recent LED blinking breakage on 3945 introduced by "iwlwifi: separate led function from statistic notification" Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Tested-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlagn: Use iwl_write8() for CSR_INT_COALESCING registerBen Cahill2009-11-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CSR_INT_COALESCING previously had only one, but now has two single-byte fields. With only one single-byte field (lowest order byte) it was okay to write via iwl_write32(), but now with two, an iwl_write32() to the lower order field clobbers the other field (odd-address CSR_INT_PERIODIC_REG, offset 0x5), and an iwl_write32() to CSR_INT_PERIODIC_REG could clobber the lowest byte of the next-higher register (CSR_INT, offset 0x8). Fortunately, no bad side effects have been produced by the iwl_write32() usage, due to order of execution (low order byte was always written before higher order byte), and the fact that writing "0" to the low byte of the next higher register has no effect (only action is when writing "1"s). Nonetheless, this cleans up the accesses so no bad side effects might occur in the future, if execution order changes, or more bit fields get added to CSR_INT_COALESCING. Add some comments regarding periodic interrupt usage. Signed-off-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: Add iwl_write8()Ben Cahill2009-11-23
| | | | | | | | | | | | | | | | | | To support byte writes to CSR_INT_COALESCING and CSR_INT_PERIODIC registers, add iwl_write8(), including debug/trace support. Signed-off-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mac80211: fix rcu lockingJohannes Berg2009-11-23
| | | | | | | | | | | | | | | | | | Add a missing rcu_read_unlock() before jumping out of the ieee80211_change_station() function in the error case. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath5k: Fix I/Q calibrationLukáš Turek2009-11-23
| | | | | | | | | | | | | | | | | | | | The sign of correction coefficients was lost in the calculations, which caused high packetloss in 802.11a mode after the results were applied. Fixed by removing unneccesary and broken AND with a bit mask. Signed-off-by: Lukas Turek <8an@praha12.net> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mac80211: remove dead struct memberJohannes Berg2009-11-23
| | | | | | | | | | | | | | | | | | ieee80211_local.wstats is a remnant from the days when we still had to worry about wireless extensions in mac80211 -- it can be removed. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * b43: Rewrite DMA Tx status handling sanity checksMichael Buesch2009-11-23
| | | | | | | | | | | | | | | | | | | | | | | | This rewrites the error handling policies in the TX status handler. It tries to be error-tolerant as in "try hard to not crash the machine". It won't recover from errors (that are bugs in the firmware or driver), because that's impossible. However, it will return a more or less useful error message and bail out. It also tries hard to use rate-limited messages to not flood the syslog in case of a failure. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: This patch fix RX unpadding for any received frame.Benoit PAPILLAULT2009-11-23
| | | | | | | | | | | | | | | | | | | | It has been tested with a 802.11 frame generator and by checking the FCS field of each received frame with the value reported by the Atheros hardware. This patch is useful if you are trying to analyze non standard 802.11 frame going over the air. Signed-off-by: Benoit PAPILLAULT <benoit.papillault@free.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ssb: Unconditionally log results of core scansLarry Finger2009-11-23
| | | | | | | | | | | | | | | | | | | | At present, the results of an SSB core scan are only logged when CONFIG_SSB_DEBUG is "y". As this may not be set in a distro kernel, it is difficult interpret many problems posted in bug reports or in help forums. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ipw2200: Set core hw rfkill status when hardware changes stateMatthew Garrett2009-11-23
| | | | | | | | | | | | | | | | | | ipw2200 is able to detect when it's been hard-killed, but doesn't update the core rfkill state or update userspace. Ensure that the state is updated, allowing the rfkill core to notify userspace. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ipw2100: Register the wiphy deviceMatthew Garrett2009-11-23
| | | | | | | | | | | | | | | | | | | | | | libipw unconditionally calls wiphy_unregister, but it's up to the driver to register it in the first place. ipw2100 fails to do so. Add the necessary glue code, and also ensure that rfkill statuses get set up appropriately. (Augmented for proper wiphy_unregister placement. -- JWL) Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * libipw: initiate cfg80211 API conversion (v2)John W. Linville2009-11-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Initiate the conversion of libipw to the new cfg80211 configuration API. For now, leave CONFIG_IPW2200_PROMISCUOUS stuff alone. Eventually migrate it to cfg80211 when the add/del/change_virtual_intf methods are implemented. (v2: Fix unconditional wiphy_unregister in libipw which was causing problems for ipw2100, somewhat based on prior attempted fix by Zhu Yi <yi.zhu@intel.com>. Previously both original version of this patch and Zhu Yi's fix attempt were reverted due to discovery of regressions. -- JWL) Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mac80211: fix endianess on mesh_path_error_tx() callsRui Paulo2009-11-19
| | | | | | | | | | Signed-off-by: Rui Paulo <rpaulo@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-09-22 08:22:40 -0400