1 files changed, 130 insertions, 0 deletions

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 169b3837af52..abddabc1efa8 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -78,6 +78,7 @@ enum {
         ALC260_ACER,
         ALC260_WILL,
         ALC260_REPLACER_672V,
+        ALC260_FAVORIT100,
 #ifdef CONFIG_SND_DEBUG
         ALC260_TEST,
 #endif
@@ -4537,6 +4538,26 @@ static struct hda_input_mux alc260_acer_capture_sources[2] = {
                 },
         },
 };
+
+/* Maxdata Favorit 100XS */
+static struct hda_input_mux alc260_favorit100_capture_sources[2] = {
+        {
+                .num_items = 2,
+                .items = {
+                        { "Line/Mic", 0x0 },
+                        { "CD", 0x4 },
+                },
+        },
+        {
+                .num_items = 3,
+                .items = {
+                        { "Line/Mic", 0x0 },
+                        { "CD", 0x4 },
+                        { "Mixer", 0x5 },
+                },
+        },
+};
+
 /*
  * This is just place-holder, so there's something for alc_build_pcms to look
  * at when it calculates the maximum number of channels. ALC260 has no mixer
@@ -4817,6 +4838,18 @@ static struct snd_kcontrol_new alc260_acer_mixer[] = {
         { } /* end */
 };
 
+/* Maxdata Favorit 100XS: one output and one input (0x12) jack
+ */
+static struct snd_kcontrol_new alc260_favorit100_mixer[] = {
+        HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT),
+        HDA_BIND_MUTE("Master Playback Switch", 0x08, 2, HDA_INPUT),
+        ALC_PIN_MODE("Output Jack Mode", 0x0f, ALC_PIN_DIR_INOUT),
+        HDA_CODEC_VOLUME("Line/Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
+        HDA_CODEC_MUTE("Line/Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
+        ALC_PIN_MODE("Line/Mic Jack Mode", 0x12, ALC_PIN_DIR_IN),
+        { } /* end */
+};
+
 /* Packard bell V7900  ALC260 pin usage: HP = 0x0f, Mic jack = 0x12,
  * Line In jack = 0x14, CD audio =  0x16, pc beep = 0x17.
  */
@@ -5188,6 +5221,89 @@ static struct hda_verb alc260_acer_init_verbs[] = {
         { }
 };
 
+/* Initialisation sequence for Maxdata Favorit 100XS
+ * (adapted from Acer init verbs).
+ */
+static struct hda_verb alc260_favorit100_init_verbs[] = {
+        /* GPIO 0 enables the output jack.
+         * Turn this on and rely on the standard mute
+         * methods whenever the user wants to turn these outputs off.
+         */
+        {0x01, AC_VERB_SET_GPIO_MASK, 0x01},
+        {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01},
+        {0x01, AC_VERB_SET_GPIO_DATA, 0x01},
+        /* Line/Mic input jack is connected to Mic1 pin */
+        {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50},
+        /* Ensure all other unused pins are disabled and muted. */
+        {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+        {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+        {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+        {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+        {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+        {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+        {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+        {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+        {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+        {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+        /* Disable digital (SPDIF) pins */
+        {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0},
+        {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0},
+
+        /* Ensure Mic1 and Line1 pin widgets take input from the OUT1 sum
+         * bus when acting as outputs.
+         */
+        {0x0b, AC_VERB_SET_CONNECT_SEL, 0},
+        {0x0d, AC_VERB_SET_CONNECT_SEL, 0},
+
+        /* Start with output sum widgets muted and their output gains at min */
+        {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+        {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+        {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+        {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+        {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+        {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+        {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+        {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+        {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+
+        /* Unmute Line-out pin widget amp left and right
+         * (no equiv mixer ctrl)
+         */
+        {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+        /* Unmute Mic1 and Line1 pin widget input buffers since they start as
+         * inputs. If the pin mode is changed by the user the pin mode control
+         * will take care of enabling the pin's input/output buffers as needed.
+         * Therefore there's no need to enable the input buffer at this
+         * stage.
+         */
+        {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+
+        /* Mute capture amp left and right */
+        {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+        /* Set ADC connection select to match default mixer setting - mic
+         * (on mic1 pin)
+         */
+        {0x04, AC_VERB_SET_CONNECT_SEL, 0x00},
+
+        /* Do similar with the second ADC: mute capture input amp and
+         * set ADC connection to mic to match ALSA's default state.
+         */
+        {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+        {0x05, AC_VERB_SET_CONNECT_SEL, 0x00},
+
+        /* Mute all inputs to mixer widget (even unconnected ones) */
+        {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */
+        {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */
+        {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */
+        {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */
+        {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */
+        {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */
+        {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */
+        {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */
+
+        { }
+};
+
 static struct hda_verb alc260_will_verbs[] = {
         {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
         {0x0b, AC_VERB_SET_CONNECT_SEL, 0x00},
@@ -5730,6 +5846,7 @@ static const char *alc260_models[ALC260_MODEL_LAST] = {
         [ALC260_ACER]           = "acer",
         [ALC260_WILL]           = "will",
         [ALC260_REPLACER_672V]  = "replacer",
+        [ALC260_FAVORIT100]     = "favorit100",
 #ifdef CONFIG_SND_DEBUG
         [ALC260_TEST]           = "test",
 #endif
@@ -5739,6 +5856,7 @@ static const char *alc260_models[ALC260_MODEL_LAST] = {
 static struct snd_pci_quirk alc260_cfg_tbl[] = {
         SND_PCI_QUIRK(0x1025, 0x007b, "Acer C20x", ALC260_ACER),
         SND_PCI_QUIRK(0x1025, 0x008f, "Acer", ALC260_ACER),
+        SND_PCI_QUIRK(0x1509, 0x4540, "Favorit 100XS", ALC260_FAVORIT100),
         SND_PCI_QUIRK(0x103c, 0x2808, "HP d5700", ALC260_HP_3013),
         SND_PCI_QUIRK(0x103c, 0x280a, "HP d5750", ALC260_HP_3013),
         SND_PCI_QUIRK(0x103c, 0x3010, "HP", ALC260_HP_3013),
@@ -5840,6 +5958,18 @@ static struct alc_config_preset alc260_presets[] = {
                 .num_mux_defs = ARRAY_SIZE(alc260_acer_capture_sources),
                 .input_mux = alc260_acer_capture_sources,
         },
+        [ALC260_FAVORIT100] = {
+                .mixers = { alc260_favorit100_mixer },
+                .init_verbs = { alc260_favorit100_init_verbs },
+                .num_dacs = ARRAY_SIZE(alc260_dac_nids),
+                .dac_nids = alc260_dac_nids,
+                .num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids),
+                .adc_nids = alc260_dual_adc_nids,
+                .num_channel_mode = ARRAY_SIZE(alc260_modes),
+                .channel_mode = alc260_modes,
+                .num_mux_defs = ARRAY_SIZE(alc260_favorit100_capture_sources),
+                .input_mux = alc260_favorit100_capture_sources,
+        },
         [ALC260_WILL] = {
                 .mixers = { alc260_will_mixer },
                 .init_verbs = { alc260_init_verbs, alc260_will_verbs },