diff options
Diffstat (limited to 'sound/soc/s3c24xx/rx1950_uda1380.c')
-rw-r--r-- | sound/soc/s3c24xx/rx1950_uda1380.c | 319 |
1 files changed, 0 insertions, 319 deletions
diff --git a/sound/soc/s3c24xx/rx1950_uda1380.c b/sound/soc/s3c24xx/rx1950_uda1380.c deleted file mode 100644 index 5a4587e02886..000000000000 --- a/sound/soc/s3c24xx/rx1950_uda1380.c +++ /dev/null | |||
@@ -1,319 +0,0 @@ | |||
1 | /* | ||
2 | * rx1950.c -- ALSA Soc Audio Layer | ||
3 | * | ||
4 | * Copyright (c) 2010 Vasily Khoruzhick <anarsoul@gmail.com> | ||
5 | * | ||
6 | * Based on smdk2440.c and magician.c | ||
7 | * | ||
8 | * Authors: Graeme Gregory graeme.gregory@wolfsonmicro.com | ||
9 | * Philipp Zabel <philipp.zabel@gmail.com> | ||
10 | * Denis Grigoriev <dgreenday@gmail.com> | ||
11 | * Vasily Khoruzhick <anarsoul@gmail.com> | ||
12 | * | ||
13 | * This program is free software; you can redistribute it and/or modify it | ||
14 | * under the terms of the GNU General Public License as published by the | ||
15 | * Free Software Foundation; either version 2 of the License, or (at your | ||
16 | * option) any later version. | ||
17 | * | ||
18 | */ | ||
19 | |||
20 | #include <linux/module.h> | ||
21 | #include <linux/moduleparam.h> | ||
22 | #include <linux/platform_device.h> | ||
23 | #include <linux/i2c.h> | ||
24 | #include <linux/gpio.h> | ||
25 | #include <linux/clk.h> | ||
26 | |||
27 | #include <sound/soc.h> | ||
28 | #include <sound/uda1380.h> | ||
29 | #include <sound/jack.h> | ||
30 | |||
31 | #include <plat/regs-iis.h> | ||
32 | |||
33 | #include <mach/regs-clock.h> | ||
34 | |||
35 | #include <asm/mach-types.h> | ||
36 | |||
37 | #include "dma.h" | ||
38 | #include "s3c24xx-i2s.h" | ||
39 | #include "../codecs/uda1380.h" | ||
40 | |||
41 | static int rx1950_uda1380_init(struct snd_soc_pcm_runtime *rtd); | ||
42 | static int rx1950_startup(struct snd_pcm_substream *substream); | ||
43 | static int rx1950_hw_params(struct snd_pcm_substream *substream, | ||
44 | struct snd_pcm_hw_params *params); | ||
45 | static int rx1950_spk_power(struct snd_soc_dapm_widget *w, | ||
46 | struct snd_kcontrol *kcontrol, int event); | ||
47 | |||
48 | static unsigned int rates[] = { | ||
49 | 16000, | ||
50 | 44100, | ||
51 | 48000, | ||
52 | }; | ||
53 | |||
54 | static struct snd_pcm_hw_constraint_list hw_rates = { | ||
55 | .count = ARRAY_SIZE(rates), | ||
56 | .list = rates, | ||
57 | .mask = 0, | ||
58 | }; | ||
59 | |||
60 | static struct snd_soc_jack hp_jack; | ||
61 | |||
62 | static struct snd_soc_jack_pin hp_jack_pins[] = { | ||
63 | { | ||
64 | .pin = "Headphone Jack", | ||
65 | .mask = SND_JACK_HEADPHONE, | ||
66 | }, | ||
67 | { | ||
68 | .pin = "Speaker", | ||
69 | .mask = SND_JACK_HEADPHONE, | ||
70 | .invert = 1, | ||
71 | }, | ||
72 | }; | ||
73 | |||
74 | static struct snd_soc_jack_gpio hp_jack_gpios[] = { | ||
75 | [0] = { | ||
76 | .gpio = S3C2410_GPG(12), | ||
77 | .name = "hp-gpio", | ||
78 | .report = SND_JACK_HEADPHONE, | ||
79 | .invert = 1, | ||
80 | .debounce_time = 200, | ||
81 | }, | ||
82 | }; | ||
83 | |||
84 | static struct snd_soc_ops rx1950_ops = { | ||
85 | .startup = rx1950_startup, | ||
86 | .hw_params = rx1950_hw_params, | ||
87 | }; | ||
88 | |||
89 | /* s3c24xx digital audio interface glue - connects codec <--> CPU */ | ||
90 | static struct snd_soc_dai_link rx1950_uda1380_dai[] = { | ||
91 | { | ||
92 | .name = "uda1380", | ||
93 | .stream_name = "UDA1380 Duplex", | ||
94 | .cpu_dai_name = "s3c24xx-iis", | ||
95 | .codec_dai_name = "uda1380-hifi", | ||
96 | .init = rx1950_uda1380_init, | ||
97 | .platform_name = "samsung-audio", | ||
98 | .codec_name = "uda1380-codec.0-001a", | ||
99 | .ops = &rx1950_ops, | ||
100 | }, | ||
101 | }; | ||
102 | |||
103 | static struct snd_soc_card rx1950_asoc = { | ||
104 | .name = "rx1950", | ||
105 | .dai_link = rx1950_uda1380_dai, | ||
106 | .num_links = ARRAY_SIZE(rx1950_uda1380_dai), | ||
107 | }; | ||
108 | |||
109 | /* rx1950 machine dapm widgets */ | ||
110 | static const struct snd_soc_dapm_widget uda1380_dapm_widgets[] = { | ||
111 | SND_SOC_DAPM_HP("Headphone Jack", NULL), | ||
112 | SND_SOC_DAPM_MIC("Mic Jack", NULL), | ||
113 | SND_SOC_DAPM_SPK("Speaker", rx1950_spk_power), | ||
114 | }; | ||
115 | |||
116 | /* rx1950 machine audio_map */ | ||
117 | static const struct snd_soc_dapm_route audio_map[] = { | ||
118 | /* headphone connected to VOUTLHP, VOUTRHP */ | ||
119 | {"Headphone Jack", NULL, "VOUTLHP"}, | ||
120 | {"Headphone Jack", NULL, "VOUTRHP"}, | ||
121 | |||
122 | /* ext speaker connected to VOUTL, VOUTR */ | ||
123 | {"Speaker", NULL, "VOUTL"}, | ||
124 | {"Speaker", NULL, "VOUTR"}, | ||
125 | |||
126 | /* mic is connected to VINM */ | ||
127 | {"VINM", NULL, "Mic Jack"}, | ||
128 | }; | ||
129 | |||
130 | static struct platform_device *s3c24xx_snd_device; | ||
131 | |||
132 | static int rx1950_startup(struct snd_pcm_substream *substream) | ||
133 | { | ||
134 | struct snd_pcm_runtime *runtime = substream->runtime; | ||
135 | |||
136 | runtime->hw.rate_min = hw_rates.list[0]; | ||
137 | runtime->hw.rate_max = hw_rates.list[hw_rates.count - 1]; | ||
138 | runtime->hw.rates = SNDRV_PCM_RATE_KNOT; | ||
139 | |||
140 | return snd_pcm_hw_constraint_list(runtime, 0, | ||
141 | SNDRV_PCM_HW_PARAM_RATE, | ||
142 | &hw_rates); | ||
143 | } | ||
144 | |||
145 | static int rx1950_spk_power(struct snd_soc_dapm_widget *w, | ||
146 | struct snd_kcontrol *kcontrol, int event) | ||
147 | { | ||
148 | if (SND_SOC_DAPM_EVENT_ON(event)) | ||
149 | gpio_set_value(S3C2410_GPA(1), 1); | ||
150 | else | ||
151 | gpio_set_value(S3C2410_GPA(1), 0); | ||
152 | |||
153 | return 0; | ||
154 | } | ||
155 | |||
156 | static int rx1950_hw_params(struct snd_pcm_substream *substream, | ||
157 | struct snd_pcm_hw_params *params) | ||
158 | { | ||
159 | struct snd_soc_pcm_runtime *rtd = substream->private_data; | ||
160 | struct snd_soc_dai *cpu_dai = rtd->cpu_dai; | ||
161 | struct snd_soc_dai *codec_dai = rtd->codec_dai; | ||
162 | int div; | ||
163 | int ret; | ||
164 | unsigned int rate = params_rate(params); | ||
165 | int clk_source, fs_mode; | ||
166 | |||
167 | switch (rate) { | ||
168 | case 16000: | ||
169 | case 48000: | ||
170 | clk_source = S3C24XX_CLKSRC_PCLK; | ||
171 | fs_mode = S3C2410_IISMOD_256FS; | ||
172 | div = s3c24xx_i2s_get_clockrate() / (256 * rate); | ||
173 | if (s3c24xx_i2s_get_clockrate() % (256 * rate) > (128 * rate)) | ||
174 | div++; | ||
175 | break; | ||
176 | case 44100: | ||
177 | case 88200: | ||
178 | clk_source = S3C24XX_CLKSRC_MPLL; | ||
179 | fs_mode = S3C2410_IISMOD_384FS; | ||
180 | div = 1; | ||
181 | break; | ||
182 | default: | ||
183 | printk(KERN_ERR "%s: rate %d is not supported\n", | ||
184 | __func__, rate); | ||
185 | return -EINVAL; | ||
186 | } | ||
187 | |||
188 | /* set codec DAI configuration */ | ||
189 | ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | | ||
190 | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS); | ||
191 | if (ret < 0) | ||
192 | return ret; | ||
193 | |||
194 | /* set cpu DAI configuration */ | ||
195 | ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | | ||
196 | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS); | ||
197 | if (ret < 0) | ||
198 | return ret; | ||
199 | |||
200 | /* select clock source */ | ||
201 | ret = snd_soc_dai_set_sysclk(cpu_dai, clk_source, rate, | ||
202 | SND_SOC_CLOCK_OUT); | ||
203 | if (ret < 0) | ||
204 | return ret; | ||
205 | |||
206 | /* set MCLK division for sample rate */ | ||
207 | ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK, | ||
208 | fs_mode); | ||
209 | if (ret < 0) | ||
210 | return ret; | ||
211 | |||
212 | /* set BCLK division for sample rate */ | ||
213 | ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_BCLK, | ||
214 | S3C2410_IISMOD_32FS); | ||
215 | if (ret < 0) | ||
216 | return ret; | ||
217 | |||
218 | /* set prescaler division for sample rate */ | ||
219 | ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER, | ||
220 | S3C24XX_PRESCALE(div, div)); | ||
221 | if (ret < 0) | ||
222 | return ret; | ||
223 | |||
224 | return 0; | ||
225 | } | ||
226 | |||
227 | static int rx1950_uda1380_init(struct snd_soc_pcm_runtime *rtd) | ||
228 | { | ||
229 | struct snd_soc_codec *codec = rtd->codec; | ||
230 | struct snd_soc_dapm_context *dapm = &codec->dapm; | ||
231 | int err; | ||
232 | |||
233 | /* Add rx1950 specific widgets */ | ||
234 | err = snd_soc_dapm_new_controls(dapm, uda1380_dapm_widgets, | ||
235 | ARRAY_SIZE(uda1380_dapm_widgets)); | ||
236 | |||
237 | if (err) | ||
238 | return err; | ||
239 | |||
240 | /* Set up rx1950 specific audio path audio_mapnects */ | ||
241 | err = snd_soc_dapm_add_routes(dapm, audio_map, | ||
242 | ARRAY_SIZE(audio_map)); | ||
243 | |||
244 | if (err) | ||
245 | return err; | ||
246 | |||
247 | snd_soc_dapm_enable_pin(dapm, "Headphone Jack"); | ||
248 | snd_soc_dapm_enable_pin(dapm, "Speaker"); | ||
249 | |||
250 | snd_soc_dapm_sync(dapm); | ||
251 | |||
252 | snd_soc_jack_new(codec, "Headphone Jack", SND_JACK_HEADPHONE, | ||
253 | &hp_jack); | ||
254 | |||
255 | snd_soc_jack_add_pins(&hp_jack, ARRAY_SIZE(hp_jack_pins), | ||
256 | hp_jack_pins); | ||
257 | |||
258 | snd_soc_jack_add_gpios(&hp_jack, ARRAY_SIZE(hp_jack_gpios), | ||
259 | hp_jack_gpios); | ||
260 | |||
261 | return 0; | ||
262 | } | ||
263 | |||
264 | static int __init rx1950_init(void) | ||
265 | { | ||
266 | int ret; | ||
267 | |||
268 | if (!machine_is_rx1950()) | ||
269 | return -ENODEV; | ||
270 | |||
271 | /* configure some gpios */ | ||
272 | ret = gpio_request(S3C2410_GPA(1), "speaker-power"); | ||
273 | if (ret) | ||
274 | goto err_gpio; | ||
275 | |||
276 | ret = gpio_direction_output(S3C2410_GPA(1), 0); | ||
277 | if (ret) | ||
278 | goto err_gpio_conf; | ||
279 | |||
280 | s3c24xx_snd_device = platform_device_alloc("soc-audio", -1); | ||
281 | if (!s3c24xx_snd_device) { | ||
282 | ret = -ENOMEM; | ||
283 | goto err_plat_alloc; | ||
284 | } | ||
285 | |||
286 | platform_set_drvdata(s3c24xx_snd_device, &rx1950_asoc); | ||
287 | ret = platform_device_add(s3c24xx_snd_device); | ||
288 | |||
289 | if (ret) { | ||
290 | platform_device_put(s3c24xx_snd_device); | ||
291 | goto err_plat_add; | ||
292 | } | ||
293 | |||
294 | return 0; | ||
295 | |||
296 | err_plat_add: | ||
297 | err_plat_alloc: | ||
298 | err_gpio_conf: | ||
299 | gpio_free(S3C2410_GPA(1)); | ||
300 | |||
301 | err_gpio: | ||
302 | return ret; | ||
303 | } | ||
304 | |||
305 | static void __exit rx1950_exit(void) | ||
306 | { | ||
307 | platform_device_unregister(s3c24xx_snd_device); | ||
308 | snd_soc_jack_free_gpios(&hp_jack, ARRAY_SIZE(hp_jack_gpios), | ||
309 | hp_jack_gpios); | ||
310 | gpio_free(S3C2410_GPA(1)); | ||
311 | } | ||
312 | |||
313 | module_init(rx1950_init); | ||
314 | module_exit(rx1950_exit); | ||
315 | |||
316 | /* Module information */ | ||
317 | MODULE_AUTHOR("Vasily Khoruzhick"); | ||
318 | MODULE_DESCRIPTION("ALSA SoC RX1950"); | ||
319 | MODULE_LICENSE("GPL"); | ||