1 files changed, 14 insertions, 268 deletions

diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c
index d94a495bd6bd..a7a3a9c5c6ff 100644
--- a/sound/soc/pxa/pxa2xx-ac97.c
+++ b/sound/soc/pxa/pxa2xx-ac97.c
@@ -13,225 +13,30 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/wait.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
 
 #include <sound/core.h>
-#include <sound/pcm.h>
 #include <sound/ac97_codec.h>
-#include <sound/initval.h>
 #include <sound/soc.h>
+#include <sound/pxa2xx-lib.h>
 
-#include <asm/irq.h>
-#include <linux/mutex.h>
 #include <mach/hardware.h>
 #include <mach/pxa-regs.h>
-#include <mach/pxa2xx-gpio.h>
-#include <mach/audio.h>
 
 #include "pxa2xx-pcm.h"
 #include "pxa2xx-ac97.h"
 
-static DEFINE_MUTEX(car_mutex);
-static DECLARE_WAIT_QUEUE_HEAD(gsr_wq);
-static volatile long gsr_bits;
-static struct clk *ac97_clk;
-#ifdef CONFIG_PXA27x
-static struct clk *ac97conf_clk;
-#endif
-
-/*
- * Beware PXA27x bugs:
- *
- *   o Slot 12 read from modem space will hang controller.
- *   o CDONE, SDONE interrupt fails after any slot 12 IO.
- *
- * We therefore have an hybrid approach for waiting on SDONE (interrupt or
- * 1 jiffy timeout if interrupt never comes).
- */
-
-static unsigned short pxa2xx_ac97_read(struct snd_ac97 *ac97,
-        unsigned short reg)
-{
-        unsigned short val = -1;
-        volatile u32 *reg_addr;
-
-        mutex_lock(&car_mutex);
-
-        /* set up primary or secondary codec/modem space */
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-        reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE;
-#else
-        if (reg == AC97_GPIO_STATUS)
-                reg_addr = ac97->num ? &SMC_REG_BASE : &PMC_REG_BASE;
-        else
-                reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE;
-#endif
-        reg_addr += (reg >> 1);
-
-#ifndef CONFIG_PXA27x
-        if (reg == AC97_GPIO_STATUS) {
-                /* read from controller cache */
-                val = *reg_addr;
-                goto out;
-        }
-#endif
-
-        /* start read access across the ac97 link */
-        GSR = GSR_CDONE | GSR_SDONE;
-        gsr_bits = 0;
-        val = *reg_addr;
-
-        wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_SDONE, 1);
-        if (!((GSR | gsr_bits) & GSR_SDONE)) {
-                printk(KERN_ERR "%s: read error (ac97_reg=%x GSR=%#lx)\n",
-                                __func__, reg, GSR | gsr_bits);
-                val = -1;
-                goto out;
-        }
-
-        /* valid data now */
-        GSR = GSR_CDONE | GSR_SDONE;
-        gsr_bits = 0;
-        val = *reg_addr;
-        /* but we've just started another cycle... */
-        wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_SDONE, 1);
-
-out:    mutex_unlock(&car_mutex);
-        return val;
-}
-
-static void pxa2xx_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
-        unsigned short val)
-{
-        volatile u32 *reg_addr;
-
-        mutex_lock(&car_mutex);
-
-        /* set up primary or secondary codec/modem space */
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-        reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE;
-#else
-        if (reg == AC97_GPIO_STATUS)
-                reg_addr = ac97->num ? &SMC_REG_BASE : &PMC_REG_BASE;
-        else
-                reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE;
-#endif
-        reg_addr += (reg >> 1);
-
-        GSR = GSR_CDONE | GSR_SDONE;
-        gsr_bits = 0;
-        *reg_addr = val;
-        wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_CDONE, 1);
-        if (!((GSR | gsr_bits) & GSR_CDONE))
-                printk(KERN_ERR "%s: write error (ac97_reg=%x GSR=%#lx)\n",
-                                __func__, reg, GSR | gsr_bits);
-
-        mutex_unlock(&car_mutex);
-}
-
 static void pxa2xx_ac97_warm_reset(struct snd_ac97 *ac97)
 {
-#ifdef CONFIG_PXA3xx
-        int timeout = 100;
-#endif
-        gsr_bits = 0;
-
-#ifdef CONFIG_PXA27x
-        /* warm reset broken on Bulverde,
-           so manually keep AC97 reset high */
-        pxa_gpio_mode(113 | GPIO_OUT | GPIO_DFLT_HIGH);
-        udelay(10);
-        GCR |= GCR_WARM_RST;
-        pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
-        udelay(500);
-#elif defined(CONFIG_PXA3xx)
-        /* Can't use interrupts */
-        GCR |= GCR_WARM_RST;
-        while (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--)
-                mdelay(1);
-#else
-        GCR |= GCR_WARM_RST | GCR_PRIRDY_IEN | GCR_SECRDY_IEN;
-        wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1);
-#endif
-
-        if (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)))
-                printk(KERN_INFO "%s: warm reset timeout (GSR=%#lx)\n",
-                                 __func__, gsr_bits);
+        pxa2xx_ac97_try_warm_reset(ac97);
 
-        GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN);
-        GCR |= GCR_SDONE_IE|GCR_CDONE_IE;
+        pxa2xx_ac97_finish_reset(ac97);
 }
 
 static void pxa2xx_ac97_cold_reset(struct snd_ac97 *ac97)
 {
-#ifdef CONFIG_PXA3xx
-        int timeout = 1000;
-
-        /* Hold CLKBPB for 100us */
-        GCR = 0;
-        GCR = GCR_CLKBPB;
-        udelay(100);
-        GCR = 0;
-#endif
+        pxa2xx_ac97_try_cold_reset(ac97);
 
-        GCR &=  GCR_COLD_RST;  /* clear everything but nCRST */
-        GCR &= ~GCR_COLD_RST;  /* then assert nCRST */
-
-        gsr_bits = 0;
-#ifdef CONFIG_PXA27x
-        /* PXA27x Developers Manual section 13.5.2.2.1 */
-        clk_enable(ac97conf_clk);
-        udelay(5);
-        clk_disable(ac97conf_clk);
-        GCR = GCR_COLD_RST;
-        udelay(50);
-#elif defined(CONFIG_PXA3xx)
-        /* Can't use interrupts on PXA3xx */
-        GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN);
-
-        GCR = GCR_WARM_RST | GCR_COLD_RST;
-        while (!(GSR & (GSR_PCR | GSR_SCR)) && timeout--)
-                mdelay(10);
-#else
-        GCR = GCR_COLD_RST;
-        GCR |= GCR_CDONE_IE|GCR_SDONE_IE;
-        wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1);
-#endif
-
-        if (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)))
-                printk(KERN_INFO "%s: cold reset timeout (GSR=%#lx)\n",
-                                 __func__, gsr_bits);
-
-        GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN);
-        GCR |= GCR_SDONE_IE|GCR_CDONE_IE;
-}
-
-static irqreturn_t pxa2xx_ac97_irq(int irq, void *dev_id)
-{
-        long status;
-
-        status = GSR;
-        if (status) {
-                GSR = status;
-                gsr_bits |= status;
-                wake_up(&gsr_wq);
-
-#ifdef CONFIG_PXA27x
-                /* Although we don't use those we still need to clear them
-                   since they tend to spuriously trigger when MMC is used
-                   (hardware bug? go figure)... */
-                MISR = MISR_EOC;
-                PISR = PISR_EOC;
-                MCSR = MCSR_EOC;
-#endif
-
-                return IRQ_HANDLED;
-        }
-
-        return IRQ_NONE;
+        pxa2xx_ac97_finish_reset(ac97);
 }
 
 struct snd_ac97_bus_ops soc_ac97_ops = {
@@ -244,7 +49,7 @@ struct snd_ac97_bus_ops soc_ac97_ops = {
 static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_stereo_out = {
         .name                   = "AC97 PCM Stereo out",
         .dev_addr               = __PREG(PCDR),
-        .drcmr                  = &DRCMRTXPCDR,
+        .drcmr                  = &DRCMR(12),
         .dcmd                   = DCMD_INCSRCADDR | DCMD_FLOWTRG |
                                   DCMD_BURST32 | DCMD_WIDTH4,
 };
@@ -252,7 +57,7 @@ static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_stereo_out = {
 static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_stereo_in = {
         .name                   = "AC97 PCM Stereo in",
         .dev_addr               = __PREG(PCDR),
-        .drcmr                  = &DRCMRRXPCDR,
+        .drcmr                  = &DRCMR(11),
         .dcmd                   = DCMD_INCTRGADDR | DCMD_FLOWSRC |
                                   DCMD_BURST32 | DCMD_WIDTH4,
 };
@@ -260,7 +65,7 @@ static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_stereo_in = {
 static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_aux_mono_out = {
         .name                   = "AC97 Aux PCM (Slot 5) Mono out",
         .dev_addr               = __PREG(MODR),
-        .drcmr                  = &DRCMRTXMODR,
+        .drcmr                  = &DRCMR(10),
         .dcmd                   = DCMD_INCSRCADDR | DCMD_FLOWTRG |
                                   DCMD_BURST16 | DCMD_WIDTH2,
 };
@@ -268,7 +73,7 @@ static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_aux_mono_out = {
 static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_aux_mono_in = {
         .name                   = "AC97 Aux PCM (Slot 5) Mono in",
         .dev_addr               = __PREG(MODR),
-        .drcmr                  = &DRCMRRXMODR,
+        .drcmr                  = &DRCMR(9),
         .dcmd                   = DCMD_INCTRGADDR | DCMD_FLOWSRC |
                                   DCMD_BURST16 | DCMD_WIDTH2,
 };
@@ -276,7 +81,7 @@ static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_aux_mono_in = {
 static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_mic_mono_in = {
         .name                   = "AC97 Mic PCM (Slot 6) Mono in",
         .dev_addr               = __PREG(MCDR),
-        .drcmr                  = &DRCMRRXMCDR,
+        .drcmr                  = &DRCMR(8),
         .dcmd                   = DCMD_INCTRGADDR | DCMD_FLOWSRC |
                                   DCMD_BURST16 | DCMD_WIDTH2,
 };
@@ -285,24 +90,13 @@ static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_mic_mono_in = {
 static int pxa2xx_ac97_suspend(struct platform_device *pdev,
         struct snd_soc_dai *dai)
 {
-        GCR |= GCR_ACLINK_OFF;
-        clk_disable(ac97_clk);
-        return 0;
+        return pxa2xx_ac97_hw_suspend();
 }
 
 static int pxa2xx_ac97_resume(struct platform_device *pdev,
         struct snd_soc_dai *dai)
 {
-        pxa_gpio_mode(GPIO31_SYNC_AC97_MD);
-        pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD);
-        pxa_gpio_mode(GPIO28_BITCLK_AC97_MD);
-        pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD);
-#ifdef CONFIG_PXA27x
-        /* Use GPIO 113 as AC97 Reset on Bulverde */
-        pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
-#endif
-        clk_enable(ac97_clk);
-        return 0;
+        return pxa2xx_ac97_hw_resume();
 }
 
 #else
@@ -313,61 +107,13 @@ static int pxa2xx_ac97_resume(struct platform_device *pdev,
 static int pxa2xx_ac97_probe(struct platform_device *pdev,
                              struct snd_soc_dai *dai)
 {
-        int ret;
-
-        ret = request_irq(IRQ_AC97, pxa2xx_ac97_irq, IRQF_DISABLED, "AC97", NULL);
-        if (ret < 0)
-                goto err;
-
-        pxa_gpio_mode(GPIO31_SYNC_AC97_MD);
-        pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD);
-        pxa_gpio_mode(GPIO28_BITCLK_AC97_MD);
-        pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD);
-#ifdef CONFIG_PXA27x
-        /* Use GPIO 113 as AC97 Reset on Bulverde */
-        pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
-
-        ac97conf_clk = clk_get(&pdev->dev, "AC97CONFCLK");
-        if (IS_ERR(ac97conf_clk)) {
-                ret = PTR_ERR(ac97conf_clk);
-                ac97conf_clk = NULL;
-                goto err_irq;
-        }
-#endif
-        ac97_clk = clk_get(&pdev->dev, "AC97CLK");
-        if (IS_ERR(ac97_clk)) {
-                ret = PTR_ERR(ac97_clk);
-                ac97_clk = NULL;
-                goto err_irq;
-        }
-        clk_enable(ac97_clk);
-        return 0;
-
- err_irq:
-        GCR |= GCR_ACLINK_OFF;
-#ifdef CONFIG_PXA27x
-        if (ac97conf_clk) {
-                clk_put(ac97conf_clk);
-                ac97conf_clk = NULL;
-        }
-#endif
-        free_irq(IRQ_AC97, NULL);
- err:
-        return ret;
+        return pxa2xx_ac97_hw_probe(pdev);
 }
 
 static void pxa2xx_ac97_remove(struct platform_device *pdev,
                                struct snd_soc_dai *dai)
 {
-        GCR |= GCR_ACLINK_OFF;
-        free_irq(IRQ_AC97, NULL);
-#ifdef CONFIG_PXA27x
-        clk_put(ac97conf_clk);
-        ac97conf_clk = NULL;
-#endif
-        clk_disable(ac97_clk);
-        clk_put(ac97_clk);
-        ac97_clk = NULL;
+        pxa2xx_ac97_hw_remove(pdev);
 }
 
 static int pxa2xx_ac97_hw_params(struct snd_pcm_substream *substream,