diff options
Diffstat (limited to 'sound/soc/fsl')
-rw-r--r-- | sound/soc/fsl/Kconfig | 129 | ||||
-rw-r--r-- | sound/soc/fsl/Makefile | 31 | ||||
-rw-r--r-- | sound/soc/fsl/eukrea-tlv320.c | 164 | ||||
-rw-r--r-- | sound/soc/fsl/fsl_ssi.c | 167 | ||||
-rw-r--r-- | sound/soc/fsl/fsl_utils.c | 91 | ||||
-rw-r--r-- | sound/soc/fsl/fsl_utils.h | 26 | ||||
-rw-r--r-- | sound/soc/fsl/imx-audmux.c | 311 | ||||
-rw-r--r-- | sound/soc/fsl/imx-audmux.h | 60 | ||||
-rw-r--r-- | sound/soc/fsl/imx-mc13783.c | 156 | ||||
-rw-r--r-- | sound/soc/fsl/imx-pcm-dma.c | 176 | ||||
-rw-r--r-- | sound/soc/fsl/imx-pcm-fiq.c | 336 | ||||
-rw-r--r-- | sound/soc/fsl/imx-pcm.c | 105 | ||||
-rw-r--r-- | sound/soc/fsl/imx-pcm.h | 33 | ||||
-rw-r--r-- | sound/soc/fsl/imx-sgtl5000.c | 221 | ||||
-rw-r--r-- | sound/soc/fsl/imx-ssi.c | 690 | ||||
-rw-r--r-- | sound/soc/fsl/imx-ssi.h | 216 | ||||
-rw-r--r-- | sound/soc/fsl/mpc8610_hpcd.c | 166 | ||||
-rw-r--r-- | sound/soc/fsl/mx27vis-aic32x4.c | 245 | ||||
-rw-r--r-- | sound/soc/fsl/p1022_ds.c | 158 | ||||
-rw-r--r-- | sound/soc/fsl/phycore-ac97.c | 125 | ||||
-rw-r--r-- | sound/soc/fsl/wm1133-ev1.c | 304 |
21 files changed, 3569 insertions, 341 deletions
diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig index d754d34d68a6..d70133086ac3 100644 --- a/sound/soc/fsl/Kconfig +++ b/sound/soc/fsl/Kconfig | |||
@@ -1,18 +1,31 @@ | |||
1 | config SND_MPC52xx_DMA | 1 | config SND_SOC_FSL_SSI |
2 | tristate | 2 | tristate |
3 | 3 | ||
4 | # ASoC platform support for the Freescale PowerPC SOCs that have an SSI and | 4 | config SND_SOC_FSL_UTILS |
5 | # an Elo DMA controller, such as the MPC8610 and P1022. You will still need to | ||
6 | # select a platform driver and a codec driver. | ||
7 | config SND_SOC_POWERPC_SSI | ||
8 | tristate | 5 | tristate |
6 | |||
7 | menuconfig SND_POWERPC_SOC | ||
8 | tristate "SoC Audio for Freescale PowerPC CPUs" | ||
9 | depends on FSL_SOC | 9 | depends on FSL_SOC |
10 | help | ||
11 | Say Y or M if you want to add support for codecs attached to | ||
12 | the PowerPC CPUs. | ||
13 | |||
14 | if SND_POWERPC_SOC | ||
15 | |||
16 | config SND_MPC52xx_DMA | ||
17 | tristate | ||
18 | |||
19 | config SND_SOC_POWERPC_DMA | ||
20 | tristate | ||
10 | 21 | ||
11 | config SND_SOC_MPC8610_HPCD | 22 | config SND_SOC_MPC8610_HPCD |
12 | tristate "ALSA SoC support for the Freescale MPC8610 HPCD board" | 23 | tristate "ALSA SoC support for the Freescale MPC8610 HPCD board" |
13 | # I2C is necessary for the CS4270 driver | 24 | # I2C is necessary for the CS4270 driver |
14 | depends on MPC8610_HPCD && I2C | 25 | depends on MPC8610_HPCD && I2C |
15 | select SND_SOC_POWERPC_SSI | 26 | select SND_SOC_FSL_SSI |
27 | select SND_SOC_FSL_UTILS | ||
28 | select SND_SOC_POWERPC_DMA | ||
16 | select SND_SOC_CS4270 | 29 | select SND_SOC_CS4270 |
17 | select SND_SOC_CS4270_VD33_ERRATA | 30 | select SND_SOC_CS4270_VD33_ERRATA |
18 | default y if MPC8610_HPCD | 31 | default y if MPC8610_HPCD |
@@ -23,7 +36,9 @@ config SND_SOC_P1022_DS | |||
23 | tristate "ALSA SoC support for the Freescale P1022 DS board" | 36 | tristate "ALSA SoC support for the Freescale P1022 DS board" |
24 | # I2C is necessary for the WM8776 driver | 37 | # I2C is necessary for the WM8776 driver |
25 | depends on P1022_DS && I2C | 38 | depends on P1022_DS && I2C |
26 | select SND_SOC_POWERPC_SSI | 39 | select SND_SOC_FSL_SSI |
40 | select SND_SOC_FSL_UTILS | ||
41 | select SND_SOC_POWERPC_DMA | ||
27 | select SND_SOC_WM8776 | 42 | select SND_SOC_WM8776 |
28 | default y if P1022_DS | 43 | default y if P1022_DS |
29 | help | 44 | help |
@@ -65,3 +80,103 @@ config SND_MPC52xx_SOC_EFIKA | |||
65 | help | 80 | help |
66 | Say Y if you want to add support for sound on the Efika. | 81 | Say Y if you want to add support for sound on the Efika. |
67 | 82 | ||
83 | endif # SND_POWERPC_SOC | ||
84 | |||
85 | menuconfig SND_IMX_SOC | ||
86 | tristate "SoC Audio for Freescale i.MX CPUs" | ||
87 | depends on ARCH_MXC | ||
88 | help | ||
89 | Say Y or M if you want to add support for codecs attached to | ||
90 | the i.MX CPUs. | ||
91 | |||
92 | if SND_IMX_SOC | ||
93 | |||
94 | config SND_SOC_IMX_SSI | ||
95 | tristate | ||
96 | |||
97 | config SND_SOC_IMX_PCM | ||
98 | tristate | ||
99 | |||
100 | config SND_SOC_IMX_PCM_FIQ | ||
101 | tristate | ||
102 | select FIQ | ||
103 | select SND_SOC_IMX_PCM | ||
104 | |||
105 | config SND_SOC_IMX_PCM_DMA | ||
106 | tristate | ||
107 | select SND_SOC_DMAENGINE_PCM | ||
108 | select SND_SOC_IMX_PCM | ||
109 | |||
110 | config SND_SOC_IMX_AUDMUX | ||
111 | tristate | ||
112 | |||
113 | config SND_MXC_SOC_WM1133_EV1 | ||
114 | tristate "Audio on the i.MX31ADS with WM1133-EV1 fitted" | ||
115 | depends on MACH_MX31ADS_WM1133_EV1 && EXPERIMENTAL | ||
116 | select SND_SOC_WM8350 | ||
117 | select SND_SOC_IMX_PCM_FIQ | ||
118 | select SND_SOC_IMX_AUDMUX | ||
119 | select SND_SOC_IMX_SSI | ||
120 | help | ||
121 | Enable support for audio on the i.MX31ADS with the WM1133-EV1 | ||
122 | PMIC board with WM8835x fitted. | ||
123 | |||
124 | config SND_SOC_MX27VIS_AIC32X4 | ||
125 | tristate "SoC audio support for Visstrim M10 boards" | ||
126 | depends on MACH_IMX27_VISSTRIM_M10 && I2C | ||
127 | select SND_SOC_TLV320AIC32X4 | ||
128 | select SND_SOC_IMX_PCM_DMA | ||
129 | select SND_SOC_IMX_AUDMUX | ||
130 | select SND_SOC_IMX_SSI | ||
131 | help | ||
132 | Say Y if you want to add support for SoC audio on Visstrim SM10 | ||
133 | board with TLV320AIC32X4 codec. | ||
134 | |||
135 | config SND_SOC_PHYCORE_AC97 | ||
136 | tristate "SoC Audio support for Phytec phyCORE (and phyCARD) boards" | ||
137 | depends on MACH_PCM043 || MACH_PCA100 | ||
138 | select SND_SOC_AC97_BUS | ||
139 | select SND_SOC_WM9712 | ||
140 | select SND_SOC_IMX_PCM_FIQ | ||
141 | select SND_SOC_IMX_AUDMUX | ||
142 | select SND_SOC_IMX_SSI | ||
143 | help | ||
144 | Say Y if you want to add support for SoC audio on Phytec phyCORE | ||
145 | and phyCARD boards in AC97 mode | ||
146 | |||
147 | config SND_SOC_EUKREA_TLV320 | ||
148 | tristate "Eukrea TLV320" | ||
149 | depends on MACH_EUKREA_MBIMX27_BASEBOARD \ | ||
150 | || MACH_EUKREA_MBIMXSD25_BASEBOARD \ | ||
151 | || MACH_EUKREA_MBIMXSD35_BASEBOARD \ | ||
152 | || MACH_EUKREA_MBIMXSD51_BASEBOARD | ||
153 | depends on I2C | ||
154 | select SND_SOC_TLV320AIC23 | ||
155 | select SND_SOC_IMX_PCM_FIQ | ||
156 | select SND_SOC_IMX_AUDMUX | ||
157 | select SND_SOC_IMX_SSI | ||
158 | help | ||
159 | Enable I2S based access to the TLV320AIC23B codec attached | ||
160 | to the SSI interface | ||
161 | |||
162 | config SND_SOC_IMX_SGTL5000 | ||
163 | tristate "SoC Audio support for i.MX boards with sgtl5000" | ||
164 | depends on OF && I2C | ||
165 | select SND_SOC_SGTL5000 | ||
166 | select SND_SOC_IMX_PCM_DMA | ||
167 | select SND_SOC_IMX_AUDMUX | ||
168 | select SND_SOC_FSL_SSI | ||
169 | select SND_SOC_FSL_UTILS | ||
170 | help | ||
171 | Say Y if you want to add support for SoC audio on an i.MX board with | ||
172 | a sgtl5000 codec. | ||
173 | |||
174 | config SND_SOC_IMX_MC13783 | ||
175 | tristate "SoC Audio support for I.MX boards with mc13783" | ||
176 | depends on MFD_MC13783 | ||
177 | select SND_SOC_IMX_SSI | ||
178 | select SND_SOC_IMX_AUDMUX | ||
179 | select SND_SOC_MC13783 | ||
180 | select SND_SOC_IMX_PCM_DMA | ||
181 | |||
182 | endif # SND_IMX_SOC | ||
diff --git a/sound/soc/fsl/Makefile b/sound/soc/fsl/Makefile index b4a38c0ac58c..5f3cf3f52ea0 100644 --- a/sound/soc/fsl/Makefile +++ b/sound/soc/fsl/Makefile | |||
@@ -8,8 +8,11 @@ obj-$(CONFIG_SND_SOC_P1022_DS) += snd-soc-p1022-ds.o | |||
8 | 8 | ||
9 | # Freescale PowerPC SSI/DMA Platform Support | 9 | # Freescale PowerPC SSI/DMA Platform Support |
10 | snd-soc-fsl-ssi-objs := fsl_ssi.o | 10 | snd-soc-fsl-ssi-objs := fsl_ssi.o |
11 | snd-soc-fsl-utils-objs := fsl_utils.o | ||
11 | snd-soc-fsl-dma-objs := fsl_dma.o | 12 | snd-soc-fsl-dma-objs := fsl_dma.o |
12 | obj-$(CONFIG_SND_SOC_POWERPC_SSI) += snd-soc-fsl-ssi.o snd-soc-fsl-dma.o | 13 | obj-$(CONFIG_SND_SOC_FSL_SSI) += snd-soc-fsl-ssi.o |
14 | obj-$(CONFIG_SND_SOC_FSL_UTILS) += snd-soc-fsl-utils.o | ||
15 | obj-$(CONFIG_SND_SOC_POWERPC_DMA) += snd-soc-fsl-dma.o | ||
13 | 16 | ||
14 | # MPC5200 Platform Support | 17 | # MPC5200 Platform Support |
15 | obj-$(CONFIG_SND_MPC52xx_DMA) += mpc5200_dma.o | 18 | obj-$(CONFIG_SND_MPC52xx_DMA) += mpc5200_dma.o |
@@ -20,3 +23,29 @@ obj-$(CONFIG_SND_SOC_MPC5200_AC97) += mpc5200_psc_ac97.o | |||
20 | obj-$(CONFIG_SND_MPC52xx_SOC_PCM030) += pcm030-audio-fabric.o | 23 | obj-$(CONFIG_SND_MPC52xx_SOC_PCM030) += pcm030-audio-fabric.o |
21 | obj-$(CONFIG_SND_MPC52xx_SOC_EFIKA) += efika-audio-fabric.o | 24 | obj-$(CONFIG_SND_MPC52xx_SOC_EFIKA) += efika-audio-fabric.o |
22 | 25 | ||
26 | # i.MX Platform Support | ||
27 | snd-soc-imx-ssi-objs := imx-ssi.o | ||
28 | snd-soc-imx-audmux-objs := imx-audmux.o | ||
29 | |||
30 | obj-$(CONFIG_SND_SOC_IMX_SSI) += snd-soc-imx-ssi.o | ||
31 | obj-$(CONFIG_SND_SOC_IMX_AUDMUX) += snd-soc-imx-audmux.o | ||
32 | |||
33 | obj-$(CONFIG_SND_SOC_IMX_PCM) += snd-soc-imx-pcm.o | ||
34 | snd-soc-imx-pcm-y := imx-pcm.o | ||
35 | snd-soc-imx-pcm-$(CONFIG_SND_SOC_IMX_PCM_FIQ) += imx-pcm-fiq.o | ||
36 | snd-soc-imx-pcm-$(CONFIG_SND_SOC_IMX_PCM_DMA) += imx-pcm-dma.o | ||
37 | |||
38 | # i.MX Machine Support | ||
39 | snd-soc-eukrea-tlv320-objs := eukrea-tlv320.o | ||
40 | snd-soc-phycore-ac97-objs := phycore-ac97.o | ||
41 | snd-soc-mx27vis-aic32x4-objs := mx27vis-aic32x4.o | ||
42 | snd-soc-wm1133-ev1-objs := wm1133-ev1.o | ||
43 | snd-soc-imx-sgtl5000-objs := imx-sgtl5000.o | ||
44 | snd-soc-imx-mc13783-objs := imx-mc13783.o | ||
45 | |||
46 | obj-$(CONFIG_SND_SOC_EUKREA_TLV320) += snd-soc-eukrea-tlv320.o | ||
47 | obj-$(CONFIG_SND_SOC_PHYCORE_AC97) += snd-soc-phycore-ac97.o | ||
48 | obj-$(CONFIG_SND_SOC_MX27VIS_AIC32X4) += snd-soc-mx27vis-aic32x4.o | ||
49 | obj-$(CONFIG_SND_MXC_SOC_WM1133_EV1) += snd-soc-wm1133-ev1.o | ||
50 | obj-$(CONFIG_SND_SOC_IMX_SGTL5000) += snd-soc-imx-sgtl5000.o | ||
51 | obj-$(CONFIG_SND_SOC_IMX_MC13783) += snd-soc-imx-mc13783.o | ||
diff --git a/sound/soc/fsl/eukrea-tlv320.c b/sound/soc/fsl/eukrea-tlv320.c new file mode 100644 index 000000000000..efb9ede01208 --- /dev/null +++ b/sound/soc/fsl/eukrea-tlv320.c | |||
@@ -0,0 +1,164 @@ | |||
1 | /* | ||
2 | * eukrea-tlv320.c -- SoC audio for eukrea_cpuimxXX in I2S mode | ||
3 | * | ||
4 | * Copyright 2010 Eric Bénard, Eukréa Electromatique <eric@eukrea.com> | ||
5 | * | ||
6 | * based on sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c | ||
7 | * which is Copyright 2009 Simtec Electronics | ||
8 | * and on sound/soc/imx/phycore-ac97.c which is | ||
9 | * Copyright 2009 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de> | ||
10 | * | ||
11 | * This program is free software; you can redistribute it and/or modify it | ||
12 | * under the terms of the GNU General Public License as published by the | ||
13 | * Free Software Foundation; either version 2 of the License, or (at your | ||
14 | * option) any later version. | ||
15 | * | ||
16 | */ | ||
17 | |||
18 | #include <linux/module.h> | ||
19 | #include <linux/moduleparam.h> | ||
20 | #include <linux/device.h> | ||
21 | #include <linux/i2c.h> | ||
22 | #include <sound/core.h> | ||
23 | #include <sound/pcm.h> | ||
24 | #include <sound/soc.h> | ||
25 | #include <asm/mach-types.h> | ||
26 | |||
27 | #include "../codecs/tlv320aic23.h" | ||
28 | #include "imx-ssi.h" | ||
29 | #include "imx-audmux.h" | ||
30 | |||
31 | #define CODEC_CLOCK 12000000 | ||
32 | |||
33 | static int eukrea_tlv320_hw_params(struct snd_pcm_substream *substream, | ||
34 | struct snd_pcm_hw_params *params) | ||
35 | { | ||
36 | struct snd_soc_pcm_runtime *rtd = substream->private_data; | ||
37 | struct snd_soc_dai *codec_dai = rtd->codec_dai; | ||
38 | struct snd_soc_dai *cpu_dai = rtd->cpu_dai; | ||
39 | int ret; | ||
40 | |||
41 | ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | | ||
42 | SND_SOC_DAIFMT_NB_NF | | ||
43 | SND_SOC_DAIFMT_CBM_CFM); | ||
44 | if (ret) { | ||
45 | pr_err("%s: failed set cpu dai format\n", __func__); | ||
46 | return ret; | ||
47 | } | ||
48 | |||
49 | ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | | ||
50 | SND_SOC_DAIFMT_NB_NF | | ||
51 | SND_SOC_DAIFMT_CBM_CFM); | ||
52 | if (ret) { | ||
53 | pr_err("%s: failed set codec dai format\n", __func__); | ||
54 | return ret; | ||
55 | } | ||
56 | |||
57 | ret = snd_soc_dai_set_sysclk(codec_dai, 0, | ||
58 | CODEC_CLOCK, SND_SOC_CLOCK_OUT); | ||
59 | if (ret) { | ||
60 | pr_err("%s: failed setting codec sysclk\n", __func__); | ||
61 | return ret; | ||
62 | } | ||
63 | snd_soc_dai_set_tdm_slot(cpu_dai, 0xffffffc, 0xffffffc, 2, 0); | ||
64 | |||
65 | ret = snd_soc_dai_set_sysclk(cpu_dai, IMX_SSP_SYS_CLK, 0, | ||
66 | SND_SOC_CLOCK_IN); | ||
67 | if (ret) { | ||
68 | pr_err("can't set CPU system clock IMX_SSP_SYS_CLK\n"); | ||
69 | return ret; | ||
70 | } | ||
71 | |||
72 | return 0; | ||
73 | } | ||
74 | |||
75 | static struct snd_soc_ops eukrea_tlv320_snd_ops = { | ||
76 | .hw_params = eukrea_tlv320_hw_params, | ||
77 | }; | ||
78 | |||
79 | static struct snd_soc_dai_link eukrea_tlv320_dai = { | ||
80 | .name = "tlv320aic23", | ||
81 | .stream_name = "TLV320AIC23", | ||
82 | .codec_dai_name = "tlv320aic23-hifi", | ||
83 | .platform_name = "imx-fiq-pcm-audio.0", | ||
84 | .codec_name = "tlv320aic23-codec.0-001a", | ||
85 | .cpu_dai_name = "imx-ssi.0", | ||
86 | .ops = &eukrea_tlv320_snd_ops, | ||
87 | }; | ||
88 | |||
89 | static struct snd_soc_card eukrea_tlv320 = { | ||
90 | .name = "cpuimx-audio", | ||
91 | .owner = THIS_MODULE, | ||
92 | .dai_link = &eukrea_tlv320_dai, | ||
93 | .num_links = 1, | ||
94 | }; | ||
95 | |||
96 | static struct platform_device *eukrea_tlv320_snd_device; | ||
97 | |||
98 | static int __init eukrea_tlv320_init(void) | ||
99 | { | ||
100 | int ret; | ||
101 | int int_port = 0, ext_port; | ||
102 | |||
103 | if (machine_is_eukrea_cpuimx27()) { | ||
104 | imx_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0, | ||
105 | IMX_AUDMUX_V1_PCR_SYN | | ||
106 | IMX_AUDMUX_V1_PCR_TFSDIR | | ||
107 | IMX_AUDMUX_V1_PCR_TCLKDIR | | ||
108 | IMX_AUDMUX_V1_PCR_RFSDIR | | ||
109 | IMX_AUDMUX_V1_PCR_RCLKDIR | | ||
110 | IMX_AUDMUX_V1_PCR_TFCSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4) | | ||
111 | IMX_AUDMUX_V1_PCR_RFCSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4) | | ||
112 | IMX_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4) | ||
113 | ); | ||
114 | imx_audmux_v1_configure_port(MX27_AUDMUX_HPCR3_SSI_PINS_4, | ||
115 | IMX_AUDMUX_V1_PCR_SYN | | ||
116 | IMX_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_HPCR1_SSI0) | ||
117 | ); | ||
118 | } else if (machine_is_eukrea_cpuimx25sd() || | ||
119 | machine_is_eukrea_cpuimx35sd() || | ||
120 | machine_is_eukrea_cpuimx51sd()) { | ||
121 | ext_port = machine_is_eukrea_cpuimx25sd() ? 4 : 3; | ||
122 | imx_audmux_v2_configure_port(int_port, | ||
123 | IMX_AUDMUX_V2_PTCR_SYN | | ||
124 | IMX_AUDMUX_V2_PTCR_TFSDIR | | ||
125 | IMX_AUDMUX_V2_PTCR_TFSEL(ext_port) | | ||
126 | IMX_AUDMUX_V2_PTCR_TCLKDIR | | ||
127 | IMX_AUDMUX_V2_PTCR_TCSEL(ext_port), | ||
128 | IMX_AUDMUX_V2_PDCR_RXDSEL(ext_port) | ||
129 | ); | ||
130 | imx_audmux_v2_configure_port(ext_port, | ||
131 | IMX_AUDMUX_V2_PTCR_SYN, | ||
132 | IMX_AUDMUX_V2_PDCR_RXDSEL(int_port) | ||
133 | ); | ||
134 | } else { | ||
135 | /* return happy. We might run on a totally different machine */ | ||
136 | return 0; | ||
137 | } | ||
138 | |||
139 | eukrea_tlv320_snd_device = platform_device_alloc("soc-audio", -1); | ||
140 | if (!eukrea_tlv320_snd_device) | ||
141 | return -ENOMEM; | ||
142 | |||
143 | platform_set_drvdata(eukrea_tlv320_snd_device, &eukrea_tlv320); | ||
144 | ret = platform_device_add(eukrea_tlv320_snd_device); | ||
145 | |||
146 | if (ret) { | ||
147 | printk(KERN_ERR "ASoC: Platform device allocation failed\n"); | ||
148 | platform_device_put(eukrea_tlv320_snd_device); | ||
149 | } | ||
150 | |||
151 | return ret; | ||
152 | } | ||
153 | |||
154 | static void __exit eukrea_tlv320_exit(void) | ||
155 | { | ||
156 | platform_device_unregister(eukrea_tlv320_snd_device); | ||
157 | } | ||
158 | |||
159 | module_init(eukrea_tlv320_init); | ||
160 | module_exit(eukrea_tlv320_exit); | ||
161 | |||
162 | MODULE_AUTHOR("Eric Bénard <eric@eukrea.com>"); | ||
163 | MODULE_DESCRIPTION("CPUIMX ALSA SoC driver"); | ||
164 | MODULE_LICENSE("GPL"); | ||
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index 2eb407fa3b48..4ed2afd47782 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c | |||
@@ -11,11 +11,15 @@ | |||
11 | */ | 11 | */ |
12 | 12 | ||
13 | #include <linux/init.h> | 13 | #include <linux/init.h> |
14 | #include <linux/io.h> | ||
14 | #include <linux/module.h> | 15 | #include <linux/module.h> |
15 | #include <linux/interrupt.h> | 16 | #include <linux/interrupt.h> |
17 | #include <linux/clk.h> | ||
16 | #include <linux/device.h> | 18 | #include <linux/device.h> |
17 | #include <linux/delay.h> | 19 | #include <linux/delay.h> |
18 | #include <linux/slab.h> | 20 | #include <linux/slab.h> |
21 | #include <linux/of_address.h> | ||
22 | #include <linux/of_irq.h> | ||
19 | #include <linux/of_platform.h> | 23 | #include <linux/of_platform.h> |
20 | 24 | ||
21 | #include <sound/core.h> | 25 | #include <sound/core.h> |
@@ -25,6 +29,26 @@ | |||
25 | #include <sound/soc.h> | 29 | #include <sound/soc.h> |
26 | 30 | ||
27 | #include "fsl_ssi.h" | 31 | #include "fsl_ssi.h" |
32 | #include "imx-pcm.h" | ||
33 | |||
34 | #ifdef PPC | ||
35 | #define read_ssi(addr) in_be32(addr) | ||
36 | #define write_ssi(val, addr) out_be32(addr, val) | ||
37 | #define write_ssi_mask(addr, clear, set) clrsetbits_be32(addr, clear, set) | ||
38 | #elif defined ARM | ||
39 | #define read_ssi(addr) readl(addr) | ||
40 | #define write_ssi(val, addr) writel(val, addr) | ||
41 | /* | ||
42 | * FIXME: Proper locking should be added at write_ssi_mask caller level | ||
43 | * to ensure this register read/modify/write sequence is race free. | ||
44 | */ | ||
45 | static inline void write_ssi_mask(u32 __iomem *addr, u32 clear, u32 set) | ||
46 | { | ||
47 | u32 val = readl(addr); | ||
48 | val = (val & ~clear) | set; | ||
49 | writel(val, addr); | ||
50 | } | ||
51 | #endif | ||
28 | 52 | ||
29 | /** | 53 | /** |
30 | * FSLSSI_I2S_RATES: sample rates supported by the I2S | 54 | * FSLSSI_I2S_RATES: sample rates supported by the I2S |
@@ -94,6 +118,13 @@ struct fsl_ssi_private { | |||
94 | struct device_attribute dev_attr; | 118 | struct device_attribute dev_attr; |
95 | struct platform_device *pdev; | 119 | struct platform_device *pdev; |
96 | 120 | ||
121 | bool new_binding; | ||
122 | bool ssi_on_imx; | ||
123 | struct clk *clk; | ||
124 | struct platform_device *imx_pcm_pdev; | ||
125 | struct imx_pcm_dma_params dma_params_tx; | ||
126 | struct imx_pcm_dma_params dma_params_rx; | ||
127 | |||
97 | struct { | 128 | struct { |
98 | unsigned int rfrc; | 129 | unsigned int rfrc; |
99 | unsigned int tfrc; | 130 | unsigned int tfrc; |
@@ -145,7 +176,7 @@ static irqreturn_t fsl_ssi_isr(int irq, void *dev_id) | |||
145 | were interrupted for. We mask it with the Interrupt Enable register | 176 | were interrupted for. We mask it with the Interrupt Enable register |
146 | so that we only check for events that we're interested in. | 177 | so that we only check for events that we're interested in. |
147 | */ | 178 | */ |
148 | sisr = in_be32(&ssi->sisr) & SIER_FLAGS; | 179 | sisr = read_ssi(&ssi->sisr) & SIER_FLAGS; |
149 | 180 | ||
150 | if (sisr & CCSR_SSI_SISR_RFRC) { | 181 | if (sisr & CCSR_SSI_SISR_RFRC) { |
151 | ssi_private->stats.rfrc++; | 182 | ssi_private->stats.rfrc++; |
@@ -260,7 +291,7 @@ static irqreturn_t fsl_ssi_isr(int irq, void *dev_id) | |||
260 | 291 | ||
261 | /* Clear the bits that we set */ | 292 | /* Clear the bits that we set */ |
262 | if (sisr2) | 293 | if (sisr2) |
263 | out_be32(&ssi->sisr, sisr2); | 294 | write_ssi(sisr2, &ssi->sisr); |
264 | 295 | ||
265 | return ret; | 296 | return ret; |
266 | } | 297 | } |
@@ -295,7 +326,7 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream, | |||
295 | * SSI needs to be disabled before updating the registers we set | 326 | * SSI needs to be disabled before updating the registers we set |
296 | * here. | 327 | * here. |
297 | */ | 328 | */ |
298 | clrbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN); | 329 | write_ssi_mask(&ssi->scr, CCSR_SSI_SCR_SSIEN, 0); |
299 | 330 | ||
300 | /* | 331 | /* |
301 | * Program the SSI into I2S Slave Non-Network Synchronous mode. | 332 | * Program the SSI into I2S Slave Non-Network Synchronous mode. |
@@ -303,20 +334,18 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream, | |||
303 | * | 334 | * |
304 | * FIXME: Little-endian samples require a different shift dir | 335 | * FIXME: Little-endian samples require a different shift dir |
305 | */ | 336 | */ |
306 | clrsetbits_be32(&ssi->scr, | 337 | write_ssi_mask(&ssi->scr, |
307 | CCSR_SSI_SCR_I2S_MODE_MASK | CCSR_SSI_SCR_SYN, | 338 | CCSR_SSI_SCR_I2S_MODE_MASK | CCSR_SSI_SCR_SYN, |
308 | CCSR_SSI_SCR_TFR_CLK_DIS | CCSR_SSI_SCR_I2S_MODE_SLAVE | 339 | CCSR_SSI_SCR_TFR_CLK_DIS | CCSR_SSI_SCR_I2S_MODE_SLAVE |
309 | | (synchronous ? CCSR_SSI_SCR_SYN : 0)); | 340 | | (synchronous ? CCSR_SSI_SCR_SYN : 0)); |
310 | 341 | ||
311 | out_be32(&ssi->stcr, | 342 | write_ssi(CCSR_SSI_STCR_TXBIT0 | CCSR_SSI_STCR_TFEN0 | |
312 | CCSR_SSI_STCR_TXBIT0 | CCSR_SSI_STCR_TFEN0 | | ||
313 | CCSR_SSI_STCR_TFSI | CCSR_SSI_STCR_TEFS | | 343 | CCSR_SSI_STCR_TFSI | CCSR_SSI_STCR_TEFS | |
314 | CCSR_SSI_STCR_TSCKP); | 344 | CCSR_SSI_STCR_TSCKP, &ssi->stcr); |
315 | 345 | ||
316 | out_be32(&ssi->srcr, | 346 | write_ssi(CCSR_SSI_SRCR_RXBIT0 | CCSR_SSI_SRCR_RFEN0 | |
317 | CCSR_SSI_SRCR_RXBIT0 | CCSR_SSI_SRCR_RFEN0 | | ||
318 | CCSR_SSI_SRCR_RFSI | CCSR_SSI_SRCR_REFS | | 347 | CCSR_SSI_SRCR_RFSI | CCSR_SSI_SRCR_REFS | |
319 | CCSR_SSI_SRCR_RSCKP); | 348 | CCSR_SSI_SRCR_RSCKP, &ssi->srcr); |
320 | 349 | ||
321 | /* | 350 | /* |
322 | * The DC and PM bits are only used if the SSI is the clock | 351 | * The DC and PM bits are only used if the SSI is the clock |
@@ -324,7 +353,7 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream, | |||
324 | */ | 353 | */ |
325 | 354 | ||
326 | /* Enable the interrupts and DMA requests */ | 355 | /* Enable the interrupts and DMA requests */ |
327 | out_be32(&ssi->sier, SIER_FLAGS); | 356 | write_ssi(SIER_FLAGS, &ssi->sier); |
328 | 357 | ||
329 | /* | 358 | /* |
330 | * Set the watermark for transmit FIFI 0 and receive FIFO 0. We | 359 | * Set the watermark for transmit FIFI 0 and receive FIFO 0. We |
@@ -339,9 +368,9 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream, | |||
339 | * make this value larger (and maybe we should), but this way | 368 | * make this value larger (and maybe we should), but this way |
340 | * data will be written to memory as soon as it's available. | 369 | * data will be written to memory as soon as it's available. |
341 | */ | 370 | */ |
342 | out_be32(&ssi->sfcsr, | 371 | write_ssi(CCSR_SSI_SFCSR_TFWM0(ssi_private->fifo_depth - 2) | |
343 | CCSR_SSI_SFCSR_TFWM0(ssi_private->fifo_depth - 2) | | 372 | CCSR_SSI_SFCSR_RFWM0(ssi_private->fifo_depth - 2), |
344 | CCSR_SSI_SFCSR_RFWM0(ssi_private->fifo_depth - 2)); | 373 | &ssi->sfcsr); |
345 | 374 | ||
346 | /* | 375 | /* |
347 | * We keep the SSI disabled because if we enable it, then the | 376 | * We keep the SSI disabled because if we enable it, then the |
@@ -393,6 +422,12 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream, | |||
393 | ssi_private->second_stream = substream; | 422 | ssi_private->second_stream = substream; |
394 | } | 423 | } |
395 | 424 | ||
425 | if (ssi_private->ssi_on_imx) | ||
426 | snd_soc_dai_set_dma_data(dai, substream, | ||
427 | (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? | ||
428 | &ssi_private->dma_params_tx : | ||
429 | &ssi_private->dma_params_rx); | ||
430 | |||
396 | return 0; | 431 | return 0; |
397 | } | 432 | } |
398 | 433 | ||
@@ -417,7 +452,7 @@ static int fsl_ssi_hw_params(struct snd_pcm_substream *substream, | |||
417 | unsigned int sample_size = | 452 | unsigned int sample_size = |
418 | snd_pcm_format_width(params_format(hw_params)); | 453 | snd_pcm_format_width(params_format(hw_params)); |
419 | u32 wl = CCSR_SSI_SxCCR_WL(sample_size); | 454 | u32 wl = CCSR_SSI_SxCCR_WL(sample_size); |
420 | int enabled = in_be32(&ssi->scr) & CCSR_SSI_SCR_SSIEN; | 455 | int enabled = read_ssi(&ssi->scr) & CCSR_SSI_SCR_SSIEN; |
421 | 456 | ||
422 | /* | 457 | /* |
423 | * If we're in synchronous mode, and the SSI is already enabled, | 458 | * If we're in synchronous mode, and the SSI is already enabled, |
@@ -439,9 +474,9 @@ static int fsl_ssi_hw_params(struct snd_pcm_substream *substream, | |||
439 | /* In synchronous mode, the SSI uses STCCR for capture */ | 474 | /* In synchronous mode, the SSI uses STCCR for capture */ |
440 | if ((substream->stream == SNDRV_PCM_STREAM_PLAYBACK) || | 475 | if ((substream->stream == SNDRV_PCM_STREAM_PLAYBACK) || |
441 | ssi_private->cpu_dai_drv.symmetric_rates) | 476 | ssi_private->cpu_dai_drv.symmetric_rates) |
442 | clrsetbits_be32(&ssi->stccr, CCSR_SSI_SxCCR_WL_MASK, wl); | 477 | write_ssi_mask(&ssi->stccr, CCSR_SSI_SxCCR_WL_MASK, wl); |
443 | else | 478 | else |
444 | clrsetbits_be32(&ssi->srccr, CCSR_SSI_SxCCR_WL_MASK, wl); | 479 | write_ssi_mask(&ssi->srccr, CCSR_SSI_SxCCR_WL_MASK, wl); |
445 | 480 | ||
446 | return 0; | 481 | return 0; |
447 | } | 482 | } |
@@ -466,19 +501,19 @@ static int fsl_ssi_trigger(struct snd_pcm_substream *substream, int cmd, | |||
466 | case SNDRV_PCM_TRIGGER_START: | 501 | case SNDRV_PCM_TRIGGER_START: |
467 | case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: | 502 | case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: |
468 | if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) | 503 | if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) |
469 | setbits32(&ssi->scr, | 504 | write_ssi_mask(&ssi->scr, 0, |
470 | CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_TE); | 505 | CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_TE); |
471 | else | 506 | else |
472 | setbits32(&ssi->scr, | 507 | write_ssi_mask(&ssi->scr, 0, |
473 | CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_RE); | 508 | CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_RE); |
474 | break; | 509 | break; |
475 | 510 | ||
476 | case SNDRV_PCM_TRIGGER_STOP: | 511 | case SNDRV_PCM_TRIGGER_STOP: |
477 | case SNDRV_PCM_TRIGGER_PAUSE_PUSH: | 512 | case SNDRV_PCM_TRIGGER_PAUSE_PUSH: |
478 | if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) | 513 | if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) |
479 | clrbits32(&ssi->scr, CCSR_SSI_SCR_TE); | 514 | write_ssi_mask(&ssi->scr, CCSR_SSI_SCR_TE, 0); |
480 | else | 515 | else |
481 | clrbits32(&ssi->scr, CCSR_SSI_SCR_RE); | 516 | write_ssi_mask(&ssi->scr, CCSR_SSI_SCR_RE, 0); |
482 | break; | 517 | break; |
483 | 518 | ||
484 | default: | 519 | default: |
@@ -510,7 +545,7 @@ static void fsl_ssi_shutdown(struct snd_pcm_substream *substream, | |||
510 | if (!ssi_private->first_stream) { | 545 | if (!ssi_private->first_stream) { |
511 | struct ccsr_ssi __iomem *ssi = ssi_private->ssi; | 546 | struct ccsr_ssi __iomem *ssi = ssi_private->ssi; |
512 | 547 | ||
513 | clrbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN); | 548 | write_ssi_mask(&ssi->scr, CCSR_SSI_SCR_SSIEN, 0); |
514 | } | 549 | } |
515 | } | 550 | } |
516 | 551 | ||
@@ -622,12 +657,6 @@ static int __devinit fsl_ssi_probe(struct platform_device *pdev) | |||
622 | if (!of_device_is_available(np)) | 657 | if (!of_device_is_available(np)) |
623 | return -ENODEV; | 658 | return -ENODEV; |
624 | 659 | ||
625 | /* Check for a codec-handle property. */ | ||
626 | if (!of_get_property(np, "codec-handle", NULL)) { | ||
627 | dev_err(&pdev->dev, "missing codec-handle property\n"); | ||
628 | return -ENODEV; | ||
629 | } | ||
630 | |||
631 | /* We only support the SSI in "I2S Slave" mode */ | 660 | /* We only support the SSI in "I2S Slave" mode */ |
632 | sprop = of_get_property(np, "fsl,mode", NULL); | 661 | sprop = of_get_property(np, "fsl,mode", NULL); |
633 | if (!sprop || strcmp(sprop, "i2s-slave")) { | 662 | if (!sprop || strcmp(sprop, "i2s-slave")) { |
@@ -692,6 +721,50 @@ static int __devinit fsl_ssi_probe(struct platform_device *pdev) | |||
692 | /* Older 8610 DTs didn't have the fifo-depth property */ | 721 | /* Older 8610 DTs didn't have the fifo-depth property */ |
693 | ssi_private->fifo_depth = 8; | 722 | ssi_private->fifo_depth = 8; |
694 | 723 | ||
724 | if (of_device_is_compatible(pdev->dev.of_node, "fsl,imx21-ssi")) { | ||
725 | u32 dma_events[2]; | ||
726 | ssi_private->ssi_on_imx = true; | ||
727 | |||
728 | ssi_private->clk = clk_get(&pdev->dev, NULL); | ||
729 | if (IS_ERR(ssi_private->clk)) { | ||
730 | ret = PTR_ERR(ssi_private->clk); | ||
731 | dev_err(&pdev->dev, "could not get clock: %d\n", ret); | ||
732 | goto error_irq; | ||
733 | } | ||
734 | clk_prepare_enable(ssi_private->clk); | ||
735 | |||
736 | /* | ||
737 | * We have burstsize be "fifo_depth - 2" to match the SSI | ||
738 | * watermark setting in fsl_ssi_startup(). | ||
739 | */ | ||
740 | ssi_private->dma_params_tx.burstsize = | ||
741 | ssi_private->fifo_depth - 2; | ||
742 | ssi_private->dma_params_rx.burstsize = | ||
743 | ssi_private->fifo_depth - 2; | ||
744 | ssi_private->dma_params_tx.dma_addr = | ||
745 | ssi_private->ssi_phys + offsetof(struct ccsr_ssi, stx0); | ||
746 | ssi_private->dma_params_rx.dma_addr = | ||
747 | ssi_private->ssi_phys + offsetof(struct ccsr_ssi, srx0); | ||
748 | /* | ||
749 | * TODO: This is a temporary solution and should be changed | ||
750 | * to use generic DMA binding later when the helplers get in. | ||
751 | */ | ||
752 | ret = of_property_read_u32_array(pdev->dev.of_node, | ||
753 | "fsl,ssi-dma-events", dma_events, 2); | ||
754 | if (ret) { | ||
755 | dev_err(&pdev->dev, "could not get dma events\n"); | ||
756 | goto error_clk; | ||
757 | } | ||
758 | ssi_private->dma_params_tx.dma = dma_events[0]; | ||
759 | ssi_private->dma_params_rx.dma = dma_events[1]; | ||
760 | |||
761 | ssi_private->dma_params_tx.shared_peripheral = | ||
762 | of_device_is_compatible(of_get_parent(np), | ||
763 | "fsl,spba-bus"); | ||
764 | ssi_private->dma_params_rx.shared_peripheral = | ||
765 | ssi_private->dma_params_tx.shared_peripheral; | ||
766 | } | ||
767 | |||
695 | /* Initialize the the device_attribute structure */ | 768 | /* Initialize the the device_attribute structure */ |
696 | dev_attr = &ssi_private->dev_attr; | 769 | dev_attr = &ssi_private->dev_attr; |
697 | sysfs_attr_init(&dev_attr->attr); | 770 | sysfs_attr_init(&dev_attr->attr); |
@@ -715,6 +788,26 @@ static int __devinit fsl_ssi_probe(struct platform_device *pdev) | |||
715 | goto error_dev; | 788 | goto error_dev; |
716 | } | 789 | } |
717 | 790 | ||
791 | if (ssi_private->ssi_on_imx) { | ||
792 | ssi_private->imx_pcm_pdev = | ||
793 | platform_device_register_simple("imx-pcm-audio", | ||
794 | -1, NULL, 0); | ||
795 | if (IS_ERR(ssi_private->imx_pcm_pdev)) { | ||
796 | ret = PTR_ERR(ssi_private->imx_pcm_pdev); | ||
797 | goto error_dev; | ||
798 | } | ||
799 | } | ||
800 | |||
801 | /* | ||
802 | * If codec-handle property is missing from SSI node, we assume | ||
803 | * that the machine driver uses new binding which does not require | ||
804 | * SSI driver to trigger machine driver's probe. | ||
805 | */ | ||
806 | if (!of_get_property(np, "codec-handle", NULL)) { | ||
807 | ssi_private->new_binding = true; | ||
808 | goto done; | ||
809 | } | ||
810 | |||
718 | /* Trigger the machine driver's probe function. The platform driver | 811 | /* Trigger the machine driver's probe function. The platform driver |
719 | * name of the machine driver is taken from /compatible property of the | 812 | * name of the machine driver is taken from /compatible property of the |
720 | * device tree. We also pass the address of the CPU DAI driver | 813 | * device tree. We also pass the address of the CPU DAI driver |
@@ -736,15 +829,24 @@ static int __devinit fsl_ssi_probe(struct platform_device *pdev) | |||
736 | goto error_dai; | 829 | goto error_dai; |
737 | } | 830 | } |
738 | 831 | ||
832 | done: | ||
739 | return 0; | 833 | return 0; |
740 | 834 | ||
741 | error_dai: | 835 | error_dai: |
836 | if (ssi_private->ssi_on_imx) | ||
837 | platform_device_unregister(ssi_private->imx_pcm_pdev); | ||
742 | snd_soc_unregister_dai(&pdev->dev); | 838 | snd_soc_unregister_dai(&pdev->dev); |
743 | 839 | ||
744 | error_dev: | 840 | error_dev: |
745 | dev_set_drvdata(&pdev->dev, NULL); | 841 | dev_set_drvdata(&pdev->dev, NULL); |
746 | device_remove_file(&pdev->dev, dev_attr); | 842 | device_remove_file(&pdev->dev, dev_attr); |
747 | 843 | ||
844 | error_clk: | ||
845 | if (ssi_private->ssi_on_imx) { | ||
846 | clk_disable_unprepare(ssi_private->clk); | ||
847 | clk_put(ssi_private->clk); | ||
848 | } | ||
849 | |||
748 | error_irq: | 850 | error_irq: |
749 | free_irq(ssi_private->irq, ssi_private); | 851 | free_irq(ssi_private->irq, ssi_private); |
750 | 852 | ||
@@ -764,7 +866,13 @@ static int fsl_ssi_remove(struct platform_device *pdev) | |||
764 | { | 866 | { |
765 | struct fsl_ssi_private *ssi_private = dev_get_drvdata(&pdev->dev); | 867 | struct fsl_ssi_private *ssi_private = dev_get_drvdata(&pdev->dev); |
766 | 868 | ||
767 | platform_device_unregister(ssi_private->pdev); | 869 | if (!ssi_private->new_binding) |
870 | platform_device_unregister(ssi_private->pdev); | ||
871 | if (ssi_private->ssi_on_imx) { | ||
872 | platform_device_unregister(ssi_private->imx_pcm_pdev); | ||
873 | clk_disable_unprepare(ssi_private->clk); | ||
874 | clk_put(ssi_private->clk); | ||
875 | } | ||
768 | snd_soc_unregister_dai(&pdev->dev); | 876 | snd_soc_unregister_dai(&pdev->dev); |
769 | device_remove_file(&pdev->dev, &ssi_private->dev_attr); | 877 | device_remove_file(&pdev->dev, &ssi_private->dev_attr); |
770 | 878 | ||
@@ -779,6 +887,7 @@ static int fsl_ssi_remove(struct platform_device *pdev) | |||
779 | 887 | ||
780 | static const struct of_device_id fsl_ssi_ids[] = { | 888 | static const struct of_device_id fsl_ssi_ids[] = { |
781 | { .compatible = "fsl,mpc8610-ssi", }, | 889 | { .compatible = "fsl,mpc8610-ssi", }, |
890 | { .compatible = "fsl,imx21-ssi", }, | ||
782 | {} | 891 | {} |
783 | }; | 892 | }; |
784 | MODULE_DEVICE_TABLE(of, fsl_ssi_ids); | 893 | MODULE_DEVICE_TABLE(of, fsl_ssi_ids); |
diff --git a/sound/soc/fsl/fsl_utils.c b/sound/soc/fsl/fsl_utils.c new file mode 100644 index 000000000000..b9e42b503a37 --- /dev/null +++ b/sound/soc/fsl/fsl_utils.c | |||
@@ -0,0 +1,91 @@ | |||
1 | /** | ||
2 | * Freescale ALSA SoC Machine driver utility | ||
3 | * | ||
4 | * Author: Timur Tabi <timur@freescale.com> | ||
5 | * | ||
6 | * Copyright 2010 Freescale Semiconductor, Inc. | ||
7 | * | ||
8 | * This file is licensed under the terms of the GNU General Public License | ||
9 | * version 2. This program is licensed "as is" without any warranty of any | ||
10 | * kind, whether express or implied. | ||
11 | */ | ||
12 | |||
13 | #include <linux/module.h> | ||
14 | #include <linux/of_address.h> | ||
15 | #include <sound/soc.h> | ||
16 | |||
17 | #include "fsl_utils.h" | ||
18 | |||
19 | /** | ||
20 | * fsl_asoc_get_dma_channel - determine the dma channel for a SSI node | ||
21 | * | ||
22 | * @ssi_np: pointer to the SSI device tree node | ||
23 | * @name: name of the phandle pointing to the dma channel | ||
24 | * @dai: ASoC DAI link pointer to be filled with platform_name | ||
25 | * @dma_channel_id: dma channel id to be returned | ||
26 | * @dma_id: dma id to be returned | ||
27 | * | ||
28 | * This function determines the dma and channel id for given SSI node. It | ||
29 | * also discovers the platform_name for the ASoC DAI link. | ||
30 | */ | ||
31 | int fsl_asoc_get_dma_channel(struct device_node *ssi_np, | ||
32 | const char *name, | ||
33 | struct snd_soc_dai_link *dai, | ||
34 | unsigned int *dma_channel_id, | ||
35 | unsigned int *dma_id) | ||
36 | { | ||
37 | struct resource res; | ||
38 | struct device_node *dma_channel_np, *dma_np; | ||
39 | const u32 *iprop; | ||
40 | int ret; | ||
41 | |||
42 | dma_channel_np = of_parse_phandle(ssi_np, name, 0); | ||
43 | if (!dma_channel_np) | ||
44 | return -EINVAL; | ||
45 | |||
46 | if (!of_device_is_compatible(dma_channel_np, "fsl,ssi-dma-channel")) { | ||
47 | of_node_put(dma_channel_np); | ||
48 | return -EINVAL; | ||
49 | } | ||
50 | |||
51 | /* Determine the dev_name for the device_node. This code mimics the | ||
52 | * behavior of of_device_make_bus_id(). We need this because ASoC uses | ||
53 | * the dev_name() of the device to match the platform (DMA) device with | ||
54 | * the CPU (SSI) device. It's all ugly and hackish, but it works (for | ||
55 | * now). | ||
56 | * | ||
57 | * dai->platform name should already point to an allocated buffer. | ||
58 | */ | ||
59 | ret = of_address_to_resource(dma_channel_np, 0, &res); | ||
60 | if (ret) { | ||
61 | of_node_put(dma_channel_np); | ||
62 | return ret; | ||
63 | } | ||
64 | snprintf((char *)dai->platform_name, DAI_NAME_SIZE, "%llx.%s", | ||
65 | (unsigned long long) res.start, dma_channel_np->name); | ||
66 | |||
67 | iprop = of_get_property(dma_channel_np, "cell-index", NULL); | ||
68 | if (!iprop) { | ||
69 | of_node_put(dma_channel_np); | ||
70 | return -EINVAL; | ||
71 | } | ||
72 | *dma_channel_id = be32_to_cpup(iprop); | ||
73 | |||
74 | dma_np = of_get_parent(dma_channel_np); | ||
75 | iprop = of_get_property(dma_np, "cell-index", NULL); | ||
76 | if (!iprop) { | ||
77 | of_node_put(dma_np); | ||
78 | return -EINVAL; | ||
79 | } | ||
80 | *dma_id = be32_to_cpup(iprop); | ||
81 | |||
82 | of_node_put(dma_np); | ||
83 | of_node_put(dma_channel_np); | ||
84 | |||
85 | return 0; | ||
86 | } | ||
87 | EXPORT_SYMBOL(fsl_asoc_get_dma_channel); | ||
88 | |||
89 | MODULE_AUTHOR("Timur Tabi <timur@freescale.com>"); | ||
90 | MODULE_DESCRIPTION("Freescale ASoC utility code"); | ||
91 | MODULE_LICENSE("GPL v2"); | ||
diff --git a/sound/soc/fsl/fsl_utils.h b/sound/soc/fsl/fsl_utils.h new file mode 100644 index 000000000000..b2951126527c --- /dev/null +++ b/sound/soc/fsl/fsl_utils.h | |||
@@ -0,0 +1,26 @@ | |||
1 | /** | ||
2 | * Freescale ALSA SoC Machine driver utility | ||
3 | * | ||
4 | * Author: Timur Tabi <timur@freescale.com> | ||
5 | * | ||
6 | * Copyright 2010 Freescale Semiconductor, Inc. | ||
7 | * | ||
8 | * This file is licensed under the terms of the GNU General Public License | ||
9 | * version 2. This program is licensed "as is" without any warranty of any | ||
10 | * kind, whether express or implied. | ||
11 | */ | ||
12 | |||
13 | #ifndef _FSL_UTILS_H | ||
14 | #define _FSL_UTILS_H | ||
15 | |||
16 | #define DAI_NAME_SIZE 32 | ||
17 | |||
18 | struct snd_soc_dai_link; | ||
19 | struct device_node; | ||
20 | |||
21 | int fsl_asoc_get_dma_channel(struct device_node *ssi_np, const char *name, | ||
22 | struct snd_soc_dai_link *dai, | ||
23 | unsigned int *dma_channel_id, | ||
24 | unsigned int *dma_id); | ||
25 | |||
26 | #endif /* _FSL_UTILS_H */ | ||
diff --git a/sound/soc/fsl/imx-audmux.c b/sound/soc/fsl/imx-audmux.c new file mode 100644 index 000000000000..f23700359c67 --- /dev/null +++ b/sound/soc/fsl/imx-audmux.c | |||
@@ -0,0 +1,311 @@ | |||
1 | /* | ||
2 | * Copyright 2012 Freescale Semiconductor, Inc. | ||
3 | * Copyright 2012 Linaro Ltd. | ||
4 | * Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> | ||
5 | * | ||
6 | * Initial development of this code was funded by | ||
7 | * Phytec Messtechnik GmbH, http://www.phytec.de | ||
8 | * | ||
9 | * This program is free software; you can redistribute it and/or modify | ||
10 | * it under the terms of the GNU General Public License as published by | ||
11 | * the Free Software Foundation; either version 2 of the License, or | ||
12 | * (at your option) any later version. | ||
13 | * | ||
14 | * This program is distributed in the hope that it will be useful, | ||
15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | ||
16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | ||
17 | * GNU General Public License for more details. | ||
18 | */ | ||
19 | |||
20 | #include <linux/clk.h> | ||
21 | #include <linux/debugfs.h> | ||
22 | #include <linux/err.h> | ||
23 | #include <linux/io.h> | ||
24 | #include <linux/module.h> | ||
25 | #include <linux/of.h> | ||
26 | #include <linux/of_device.h> | ||
27 | #include <linux/platform_device.h> | ||
28 | #include <linux/slab.h> | ||
29 | |||
30 | #include "imx-audmux.h" | ||
31 | |||
32 | #define DRIVER_NAME "imx-audmux" | ||
33 | |||
34 | static struct clk *audmux_clk; | ||
35 | static void __iomem *audmux_base; | ||
36 | |||
37 | #define IMX_AUDMUX_V2_PTCR(x) ((x) * 8) | ||
38 | #define IMX_AUDMUX_V2_PDCR(x) ((x) * 8 + 4) | ||
39 | |||
40 | #ifdef CONFIG_DEBUG_FS | ||
41 | static struct dentry *audmux_debugfs_root; | ||
42 | |||
43 | /* There is an annoying discontinuity in the SSI numbering with regard | ||
44 | * to the Linux number of the devices */ | ||
45 | static const char *audmux_port_string(int port) | ||
46 | { | ||
47 | switch (port) { | ||
48 | case MX31_AUDMUX_PORT1_SSI0: | ||
49 | return "imx-ssi.0"; | ||
50 | case MX31_AUDMUX_PORT2_SSI1: | ||
51 | return "imx-ssi.1"; | ||
52 | case MX31_AUDMUX_PORT3_SSI_PINS_3: | ||
53 | return "SSI3"; | ||
54 | case MX31_AUDMUX_PORT4_SSI_PINS_4: | ||
55 | return "SSI4"; | ||
56 | case MX31_AUDMUX_PORT5_SSI_PINS_5: | ||
57 | return "SSI5"; | ||
58 | case MX31_AUDMUX_PORT6_SSI_PINS_6: | ||
59 | return "SSI6"; | ||
60 | default: | ||
61 | return "UNKNOWN"; | ||
62 | } | ||
63 | } | ||
64 | |||
65 | static ssize_t audmux_read_file(struct file *file, char __user *user_buf, | ||
66 | size_t count, loff_t *ppos) | ||
67 | { | ||
68 | ssize_t ret; | ||
69 | char *buf = kmalloc(PAGE_SIZE, GFP_KERNEL); | ||
70 | int port = (int)file->private_data; | ||
71 | u32 pdcr, ptcr; | ||
72 | |||
73 | if (!buf) | ||
74 | return -ENOMEM; | ||
75 | |||
76 | if (!audmux_base) | ||
77 | return -ENOSYS; | ||
78 | |||
79 | if (audmux_clk) | ||
80 | clk_prepare_enable(audmux_clk); | ||
81 | |||
82 | ptcr = readl(audmux_base + IMX_AUDMUX_V2_PTCR(port)); | ||
83 | pdcr = readl(audmux_base + IMX_AUDMUX_V2_PDCR(port)); | ||
84 | |||
85 | if (audmux_clk) | ||
86 | clk_disable_unprepare(audmux_clk); | ||
87 | |||
88 | ret = snprintf(buf, PAGE_SIZE, "PDCR: %08x\nPTCR: %08x\n", | ||
89 | pdcr, ptcr); | ||
90 | |||
91 | if (ptcr & IMX_AUDMUX_V2_PTCR_TFSDIR) | ||
92 | ret += snprintf(buf + ret, PAGE_SIZE - ret, | ||
93 | "TxFS output from %s, ", | ||
94 | audmux_port_string((ptcr >> 27) & 0x7)); | ||
95 | else | ||
96 | ret += snprintf(buf + ret, PAGE_SIZE - ret, | ||
97 | "TxFS input, "); | ||
98 | |||
99 | if (ptcr & IMX_AUDMUX_V2_PTCR_TCLKDIR) | ||
100 | ret += snprintf(buf + ret, PAGE_SIZE - ret, | ||
101 | "TxClk output from %s", | ||
102 | audmux_port_string((ptcr >> 22) & 0x7)); | ||
103 | else | ||
104 | ret += snprintf(buf + ret, PAGE_SIZE - ret, | ||
105 | "TxClk input"); | ||
106 | |||
107 | ret += snprintf(buf + ret, PAGE_SIZE - ret, "\n"); | ||
108 | |||
109 | if (ptcr & IMX_AUDMUX_V2_PTCR_SYN) { | ||
110 | ret += snprintf(buf + ret, PAGE_SIZE - ret, | ||
111 | "Port is symmetric"); | ||
112 | } else { | ||
113 | if (ptcr & IMX_AUDMUX_V2_PTCR_RFSDIR) | ||
114 | ret += snprintf(buf + ret, PAGE_SIZE - ret, | ||
115 | "RxFS output from %s, ", | ||
116 | audmux_port_string((ptcr >> 17) & 0x7)); | ||
117 | else | ||
118 | ret += snprintf(buf + ret, PAGE_SIZE - ret, | ||
119 | "RxFS input, "); | ||
120 | |||
121 | if (ptcr & IMX_AUDMUX_V2_PTCR_RCLKDIR) | ||
122 | ret += snprintf(buf + ret, PAGE_SIZE - ret, | ||
123 | "RxClk output from %s", | ||
124 | audmux_port_string((ptcr >> 12) & 0x7)); | ||
125 | else | ||
126 | ret += snprintf(buf + ret, PAGE_SIZE - ret, | ||
127 | "RxClk input"); | ||
128 | } | ||
129 | |||
130 | ret += snprintf(buf + ret, PAGE_SIZE - ret, | ||
131 | "\nData received from %s\n", | ||
132 | audmux_port_string((pdcr >> 13) & 0x7)); | ||
133 | |||
134 | ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret); | ||
135 | |||
136 | kfree(buf); | ||
137 | |||
138 | return ret; | ||
139 | } | ||
140 | |||
141 | static const struct file_operations audmux_debugfs_fops = { | ||
142 | .open = simple_open, | ||
143 | .read = audmux_read_file, | ||
144 | .llseek = default_llseek, | ||
145 | }; | ||
146 | |||
147 | static void __init audmux_debugfs_init(void) | ||
148 | { | ||
149 | int i; | ||
150 | char buf[20]; | ||
151 | |||
152 | audmux_debugfs_root = debugfs_create_dir("audmux", NULL); | ||
153 | if (!audmux_debugfs_root) { | ||
154 | pr_warning("Failed to create AUDMUX debugfs root\n"); | ||
155 | return; | ||
156 | } | ||
157 | |||
158 | for (i = 0; i < MX31_AUDMUX_PORT6_SSI_PINS_6 + 1; i++) { | ||
159 | snprintf(buf, sizeof(buf), "ssi%d", i); | ||
160 | if (!debugfs_create_file(buf, 0444, audmux_debugfs_root, | ||
161 | (void *)i, &audmux_debugfs_fops)) | ||
162 | pr_warning("Failed to create AUDMUX port %d debugfs file\n", | ||
163 | i); | ||
164 | } | ||
165 | } | ||
166 | |||
167 | static void __devexit audmux_debugfs_remove(void) | ||
168 | { | ||
169 | debugfs_remove_recursive(audmux_debugfs_root); | ||
170 | } | ||
171 | #else | ||
172 | static inline void audmux_debugfs_init(void) | ||
173 | { | ||
174 | } | ||
175 | |||
176 | static inline void audmux_debugfs_remove(void) | ||
177 | { | ||
178 | } | ||
179 | #endif | ||
180 | |||
181 | enum imx_audmux_type { | ||
182 | IMX21_AUDMUX, | ||
183 | IMX31_AUDMUX, | ||
184 | } audmux_type; | ||
185 | |||
186 | static struct platform_device_id imx_audmux_ids[] = { | ||
187 | { | ||
188 | .name = "imx21-audmux", | ||
189 | .driver_data = IMX21_AUDMUX, | ||
190 | }, { | ||
191 | .name = "imx31-audmux", | ||
192 | .driver_data = IMX31_AUDMUX, | ||
193 | }, { | ||
194 | /* sentinel */ | ||
195 | } | ||
196 | }; | ||
197 | MODULE_DEVICE_TABLE(platform, imx_audmux_ids); | ||
198 | |||
199 | static const struct of_device_id imx_audmux_dt_ids[] = { | ||
200 | { .compatible = "fsl,imx21-audmux", .data = &imx_audmux_ids[0], }, | ||
201 | { .compatible = "fsl,imx31-audmux", .data = &imx_audmux_ids[1], }, | ||
202 | { /* sentinel */ } | ||
203 | }; | ||
204 | MODULE_DEVICE_TABLE(of, imx_audmux_dt_ids); | ||
205 | |||
206 | static const uint8_t port_mapping[] = { | ||
207 | 0x0, 0x4, 0x8, 0x10, 0x14, 0x1c, | ||
208 | }; | ||
209 | |||
210 | int imx_audmux_v1_configure_port(unsigned int port, unsigned int pcr) | ||
211 | { | ||
212 | if (audmux_type != IMX21_AUDMUX) | ||
213 | return -EINVAL; | ||
214 | |||
215 | if (!audmux_base) | ||
216 | return -ENOSYS; | ||
217 | |||
218 | if (port >= ARRAY_SIZE(port_mapping)) | ||
219 | return -EINVAL; | ||
220 | |||
221 | writel(pcr, audmux_base + port_mapping[port]); | ||
222 | |||
223 | return 0; | ||
224 | } | ||
225 | EXPORT_SYMBOL_GPL(imx_audmux_v1_configure_port); | ||
226 | |||
227 | int imx_audmux_v2_configure_port(unsigned int port, unsigned int ptcr, | ||
228 | unsigned int pdcr) | ||
229 | { | ||
230 | if (audmux_type != IMX31_AUDMUX) | ||
231 | return -EINVAL; | ||
232 | |||
233 | if (!audmux_base) | ||
234 | return -ENOSYS; | ||
235 | |||
236 | if (audmux_clk) | ||
237 | clk_prepare_enable(audmux_clk); | ||
238 | |||
239 | writel(ptcr, audmux_base + IMX_AUDMUX_V2_PTCR(port)); | ||
240 | writel(pdcr, audmux_base + IMX_AUDMUX_V2_PDCR(port)); | ||
241 | |||
242 | if (audmux_clk) | ||
243 | clk_disable_unprepare(audmux_clk); | ||
244 | |||
245 | return 0; | ||
246 | } | ||
247 | EXPORT_SYMBOL_GPL(imx_audmux_v2_configure_port); | ||
248 | |||
249 | static int __devinit imx_audmux_probe(struct platform_device *pdev) | ||
250 | { | ||
251 | struct resource *res; | ||
252 | const struct of_device_id *of_id = | ||
253 | of_match_device(imx_audmux_dt_ids, &pdev->dev); | ||
254 | |||
255 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | ||
256 | audmux_base = devm_request_and_ioremap(&pdev->dev, res); | ||
257 | if (!audmux_base) | ||
258 | return -EADDRNOTAVAIL; | ||
259 | |||
260 | audmux_clk = clk_get(&pdev->dev, "audmux"); | ||
261 | if (IS_ERR(audmux_clk)) { | ||
262 | dev_dbg(&pdev->dev, "cannot get clock: %ld\n", | ||
263 | PTR_ERR(audmux_clk)); | ||
264 | audmux_clk = NULL; | ||
265 | } | ||
266 | |||
267 | if (of_id) | ||
268 | pdev->id_entry = of_id->data; | ||
269 | audmux_type = pdev->id_entry->driver_data; | ||
270 | if (audmux_type == IMX31_AUDMUX) | ||
271 | audmux_debugfs_init(); | ||
272 | |||
273 | return 0; | ||
274 | } | ||
275 | |||
276 | static int __devexit imx_audmux_remove(struct platform_device *pdev) | ||
277 | { | ||
278 | if (audmux_type == IMX31_AUDMUX) | ||
279 | audmux_debugfs_remove(); | ||
280 | clk_put(audmux_clk); | ||
281 | |||
282 | return 0; | ||
283 | } | ||
284 | |||
285 | static struct platform_driver imx_audmux_driver = { | ||
286 | .probe = imx_audmux_probe, | ||
287 | .remove = __devexit_p(imx_audmux_remove), | ||
288 | .id_table = imx_audmux_ids, | ||
289 | .driver = { | ||
290 | .name = DRIVER_NAME, | ||
291 | .owner = THIS_MODULE, | ||
292 | .of_match_table = imx_audmux_dt_ids, | ||
293 | } | ||
294 | }; | ||
295 | |||
296 | static int __init imx_audmux_init(void) | ||
297 | { | ||
298 | return platform_driver_register(&imx_audmux_driver); | ||
299 | } | ||
300 | subsys_initcall(imx_audmux_init); | ||
301 | |||
302 | static void __exit imx_audmux_exit(void) | ||
303 | { | ||
304 | platform_driver_unregister(&imx_audmux_driver); | ||
305 | } | ||
306 | module_exit(imx_audmux_exit); | ||
307 | |||
308 | MODULE_DESCRIPTION("Freescale i.MX AUDMUX driver"); | ||
309 | MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>"); | ||
310 | MODULE_LICENSE("GPL v2"); | ||
311 | MODULE_ALIAS("platform:" DRIVER_NAME); | ||
diff --git a/sound/soc/fsl/imx-audmux.h b/sound/soc/fsl/imx-audmux.h new file mode 100644 index 000000000000..04ebbab8d7b9 --- /dev/null +++ b/sound/soc/fsl/imx-audmux.h | |||
@@ -0,0 +1,60 @@ | |||
1 | #ifndef __IMX_AUDMUX_H | ||
2 | #define __IMX_AUDMUX_H | ||
3 | |||
4 | #define MX27_AUDMUX_HPCR1_SSI0 0 | ||
5 | #define MX27_AUDMUX_HPCR2_SSI1 1 | ||
6 | #define MX27_AUDMUX_HPCR3_SSI_PINS_4 2 | ||
7 | #define MX27_AUDMUX_PPCR1_SSI_PINS_1 3 | ||
8 | #define MX27_AUDMUX_PPCR2_SSI_PINS_2 4 | ||
9 | #define MX27_AUDMUX_PPCR3_SSI_PINS_3 5 | ||
10 | |||
11 | #define MX31_AUDMUX_PORT1_SSI0 0 | ||
12 | #define MX31_AUDMUX_PORT2_SSI1 1 | ||
13 | #define MX31_AUDMUX_PORT3_SSI_PINS_3 2 | ||
14 | #define MX31_AUDMUX_PORT4_SSI_PINS_4 3 | ||
15 | #define MX31_AUDMUX_PORT5_SSI_PINS_5 4 | ||
16 | #define MX31_AUDMUX_PORT6_SSI_PINS_6 5 | ||
17 | |||
18 | #define MX51_AUDMUX_PORT1_SSI0 0 | ||
19 | #define MX51_AUDMUX_PORT2_SSI1 1 | ||
20 | #define MX51_AUDMUX_PORT3 2 | ||
21 | #define MX51_AUDMUX_PORT4 3 | ||
22 | #define MX51_AUDMUX_PORT5 4 | ||
23 | #define MX51_AUDMUX_PORT6 5 | ||
24 | #define MX51_AUDMUX_PORT7 6 | ||
25 | |||
26 | /* Register definitions for the i.MX21/27 Digital Audio Multiplexer */ | ||
27 | #define IMX_AUDMUX_V1_PCR_INMMASK(x) ((x) & 0xff) | ||
28 | #define IMX_AUDMUX_V1_PCR_INMEN (1 << 8) | ||
29 | #define IMX_AUDMUX_V1_PCR_TXRXEN (1 << 10) | ||
30 | #define IMX_AUDMUX_V1_PCR_SYN (1 << 12) | ||
31 | #define IMX_AUDMUX_V1_PCR_RXDSEL(x) (((x) & 0x7) << 13) | ||
32 | #define IMX_AUDMUX_V1_PCR_RFCSEL(x) (((x) & 0xf) << 20) | ||
33 | #define IMX_AUDMUX_V1_PCR_RCLKDIR (1 << 24) | ||
34 | #define IMX_AUDMUX_V1_PCR_RFSDIR (1 << 25) | ||
35 | #define IMX_AUDMUX_V1_PCR_TFCSEL(x) (((x) & 0xf) << 26) | ||
36 | #define IMX_AUDMUX_V1_PCR_TCLKDIR (1 << 30) | ||
37 | #define IMX_AUDMUX_V1_PCR_TFSDIR (1 << 31) | ||
38 | |||
39 | /* Register definitions for the i.MX25/31/35/51 Digital Audio Multiplexer */ | ||
40 | #define IMX_AUDMUX_V2_PTCR_TFSDIR (1 << 31) | ||
41 | #define IMX_AUDMUX_V2_PTCR_TFSEL(x) (((x) & 0xf) << 27) | ||
42 | #define IMX_AUDMUX_V2_PTCR_TCLKDIR (1 << 26) | ||
43 | #define IMX_AUDMUX_V2_PTCR_TCSEL(x) (((x) & 0xf) << 22) | ||
44 | #define IMX_AUDMUX_V2_PTCR_RFSDIR (1 << 21) | ||
45 | #define IMX_AUDMUX_V2_PTCR_RFSEL(x) (((x) & 0xf) << 17) | ||
46 | #define IMX_AUDMUX_V2_PTCR_RCLKDIR (1 << 16) | ||
47 | #define IMX_AUDMUX_V2_PTCR_RCSEL(x) (((x) & 0xf) << 12) | ||
48 | #define IMX_AUDMUX_V2_PTCR_SYN (1 << 11) | ||
49 | |||
50 | #define IMX_AUDMUX_V2_PDCR_RXDSEL(x) (((x) & 0x7) << 13) | ||
51 | #define IMX_AUDMUX_V2_PDCR_TXRXEN (1 << 12) | ||
52 | #define IMX_AUDMUX_V2_PDCR_MODE(x) (((x) & 0x3) << 8) | ||
53 | #define IMX_AUDMUX_V2_PDCR_INMMASK(x) ((x) & 0xff) | ||
54 | |||
55 | int imx_audmux_v1_configure_port(unsigned int port, unsigned int pcr); | ||
56 | |||
57 | int imx_audmux_v2_configure_port(unsigned int port, unsigned int ptcr, | ||
58 | unsigned int pdcr); | ||
59 | |||
60 | #endif /* __IMX_AUDMUX_H */ | ||
diff --git a/sound/soc/fsl/imx-mc13783.c b/sound/soc/fsl/imx-mc13783.c new file mode 100644 index 000000000000..f59c34943662 --- /dev/null +++ b/sound/soc/fsl/imx-mc13783.c | |||
@@ -0,0 +1,156 @@ | |||
1 | /* | ||
2 | * imx-mc13783.c -- SoC audio for imx based boards with mc13783 codec | ||
3 | * | ||
4 | * Copyright 2012 Philippe Retornaz, <philippe.retornaz@epfl.ch> | ||
5 | * | ||
6 | * Heavly based on phycore-mc13783: | ||
7 | * Copyright 2009 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de> | ||
8 | * | ||
9 | * This program is free software; you can redistribute it and/or modify it | ||
10 | * under the terms of the GNU General Public License as published by the | ||
11 | * Free Software Foundation; either version 2 of the License, or (at your | ||
12 | * option) any later version. | ||
13 | * | ||
14 | */ | ||
15 | |||
16 | #include <linux/module.h> | ||
17 | #include <linux/moduleparam.h> | ||
18 | #include <linux/device.h> | ||
19 | #include <sound/core.h> | ||
20 | #include <sound/pcm.h> | ||
21 | #include <sound/soc.h> | ||
22 | #include <sound/soc-dapm.h> | ||
23 | #include <asm/mach-types.h> | ||
24 | |||
25 | #include "../codecs/mc13783.h" | ||
26 | #include "imx-ssi.h" | ||
27 | #include "imx-audmux.h" | ||
28 | |||
29 | #define FMT_SSI (SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_NB_NF | \ | ||
30 | SND_SOC_DAIFMT_CBM_CFM) | ||
31 | |||
32 | static int imx_mc13783_hifi_hw_params(struct snd_pcm_substream *substream, | ||
33 | struct snd_pcm_hw_params *params) | ||
34 | { | ||
35 | struct snd_soc_pcm_runtime *rtd = substream->private_data; | ||
36 | struct snd_soc_dai *cpu_dai = rtd->cpu_dai; | ||
37 | struct snd_soc_dai *codec_dai = rtd->codec_dai; | ||
38 | int ret; | ||
39 | |||
40 | ret = snd_soc_dai_set_tdm_slot(codec_dai, 0xfffffffc, 0xfffffffc, | ||
41 | 4, 16); | ||
42 | if (ret) | ||
43 | return ret; | ||
44 | |||
45 | ret = snd_soc_dai_set_sysclk(codec_dai, MC13783_CLK_CLIA, 26000000, 0); | ||
46 | if (ret) | ||
47 | return ret; | ||
48 | |||
49 | ret = snd_soc_dai_set_tdm_slot(cpu_dai, 0x0, 0xfffffffc, 2, 16); | ||
50 | if (ret) | ||
51 | return ret; | ||
52 | |||
53 | return 0; | ||
54 | } | ||
55 | |||
56 | static struct snd_soc_ops imx_mc13783_hifi_ops = { | ||
57 | .hw_params = imx_mc13783_hifi_hw_params, | ||
58 | }; | ||
59 | |||
60 | static struct snd_soc_dai_link imx_mc13783_dai_mc13783[] = { | ||
61 | { | ||
62 | .name = "MC13783", | ||
63 | .stream_name = "Sound", | ||
64 | .codec_dai_name = "mc13783-hifi", | ||
65 | .codec_name = "mc13783-codec", | ||
66 | .cpu_dai_name = "imx-ssi.0", | ||
67 | .platform_name = "imx-pcm-audio.0", | ||
68 | .ops = &imx_mc13783_hifi_ops, | ||
69 | .symmetric_rates = 1, | ||
70 | .dai_fmt = FMT_SSI, | ||
71 | }, | ||
72 | }; | ||
73 | |||
74 | static const struct snd_soc_dapm_widget imx_mc13783_widget[] = { | ||
75 | SND_SOC_DAPM_MIC("Mic", NULL), | ||
76 | SND_SOC_DAPM_HP("Headphone", NULL), | ||
77 | SND_SOC_DAPM_SPK("Speaker", NULL), | ||
78 | }; | ||
79 | |||
80 | static const struct snd_soc_dapm_route imx_mc13783_routes[] = { | ||
81 | {"Speaker", NULL, "LSP"}, | ||
82 | {"Headphone", NULL, "HSL"}, | ||
83 | {"Headphone", NULL, "HSR"}, | ||
84 | |||
85 | {"MC1LIN", NULL, "MC1 Bias"}, | ||
86 | {"MC2IN", NULL, "MC2 Bias"}, | ||
87 | {"MC1 Bias", NULL, "Mic"}, | ||
88 | {"MC2 Bias", NULL, "Mic"}, | ||
89 | }; | ||
90 | |||
91 | static struct snd_soc_card imx_mc13783 = { | ||
92 | .name = "imx_mc13783", | ||
93 | .dai_link = imx_mc13783_dai_mc13783, | ||
94 | .num_links = ARRAY_SIZE(imx_mc13783_dai_mc13783), | ||
95 | .dapm_widgets = imx_mc13783_widget, | ||
96 | .num_dapm_widgets = ARRAY_SIZE(imx_mc13783_widget), | ||
97 | .dapm_routes = imx_mc13783_routes, | ||
98 | .num_dapm_routes = ARRAY_SIZE(imx_mc13783_routes), | ||
99 | }; | ||
100 | |||
101 | static int __devinit imx_mc13783_probe(struct platform_device *pdev) | ||
102 | { | ||
103 | int ret; | ||
104 | |||
105 | imx_mc13783.dev = &pdev->dev; | ||
106 | |||
107 | ret = snd_soc_register_card(&imx_mc13783); | ||
108 | if (ret) { | ||
109 | dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", | ||
110 | ret); | ||
111 | return ret; | ||
112 | } | ||
113 | |||
114 | imx_audmux_v2_configure_port(MX31_AUDMUX_PORT4_SSI_PINS_4, | ||
115 | IMX_AUDMUX_V2_PTCR_SYN, | ||
116 | IMX_AUDMUX_V2_PDCR_RXDSEL(MX31_AUDMUX_PORT1_SSI0) | | ||
117 | IMX_AUDMUX_V2_PDCR_MODE(1) | | ||
118 | IMX_AUDMUX_V2_PDCR_INMMASK(0xfc)); | ||
119 | imx_audmux_v2_configure_port(MX31_AUDMUX_PORT1_SSI0, | ||
120 | IMX_AUDMUX_V2_PTCR_SYN | | ||
121 | IMX_AUDMUX_V2_PTCR_TFSDIR | | ||
122 | IMX_AUDMUX_V2_PTCR_TFSEL(MX31_AUDMUX_PORT4_SSI_PINS_4) | | ||
123 | IMX_AUDMUX_V2_PTCR_TCLKDIR | | ||
124 | IMX_AUDMUX_V2_PTCR_TCSEL(MX31_AUDMUX_PORT4_SSI_PINS_4) | | ||
125 | IMX_AUDMUX_V2_PTCR_RFSDIR | | ||
126 | IMX_AUDMUX_V2_PTCR_RFSEL(MX31_AUDMUX_PORT4_SSI_PINS_4) | | ||
127 | IMX_AUDMUX_V2_PTCR_RCLKDIR | | ||
128 | IMX_AUDMUX_V2_PTCR_RCSEL(MX31_AUDMUX_PORT4_SSI_PINS_4), | ||
129 | IMX_AUDMUX_V2_PDCR_RXDSEL(MX31_AUDMUX_PORT4_SSI_PINS_4)); | ||
130 | |||
131 | return ret; | ||
132 | } | ||
133 | |||
134 | static int __devexit imx_mc13783_remove(struct platform_device *pdev) | ||
135 | { | ||
136 | snd_soc_unregister_card(&imx_mc13783); | ||
137 | |||
138 | return 0; | ||
139 | } | ||
140 | |||
141 | static struct platform_driver imx_mc13783_audio_driver = { | ||
142 | .driver = { | ||
143 | .name = "imx_mc13783", | ||
144 | .owner = THIS_MODULE, | ||
145 | }, | ||
146 | .probe = imx_mc13783_probe, | ||
147 | .remove = __devexit_p(imx_mc13783_remove) | ||
148 | }; | ||
149 | |||
150 | module_platform_driver(imx_mc13783_audio_driver); | ||
151 | |||
152 | MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>"); | ||
153 | MODULE_AUTHOR("Philippe Retornaz <philippe.retornaz@epfl.ch"); | ||
154 | MODULE_DESCRIPTION("imx with mc13783 codec ALSA SoC driver"); | ||
155 | MODULE_LICENSE("GPL"); | ||
156 | MODULE_ALIAS("platform:imx_mc13783"); | ||
diff --git a/sound/soc/fsl/imx-pcm-dma.c b/sound/soc/fsl/imx-pcm-dma.c new file mode 100644 index 000000000000..f3c0a5ef35c8 --- /dev/null +++ b/sound/soc/fsl/imx-pcm-dma.c | |||
@@ -0,0 +1,176 @@ | |||
1 | /* | ||
2 | * imx-pcm-dma-mx2.c -- ALSA Soc Audio Layer | ||
3 | * | ||
4 | * Copyright 2009 Sascha Hauer <s.hauer@pengutronix.de> | ||
5 | * | ||
6 | * This code is based on code copyrighted by Freescale, | ||
7 | * Liam Girdwood, Javier Martin and probably others. | ||
8 | * | ||
9 | * This program is free software; you can redistribute it and/or modify it | ||
10 | * under the terms of the GNU General Public License as published by the | ||
11 | * Free Software Foundation; either version 2 of the License, or (at your | ||
12 | * option) any later version. | ||
13 | */ | ||
14 | #include <linux/clk.h> | ||
15 | #include <linux/delay.h> | ||
16 | #include <linux/device.h> | ||
17 | #include <linux/dma-mapping.h> | ||
18 | #include <linux/init.h> | ||
19 | #include <linux/interrupt.h> | ||
20 | #include <linux/module.h> | ||
21 | #include <linux/platform_device.h> | ||
22 | #include <linux/slab.h> | ||
23 | #include <linux/dmaengine.h> | ||
24 | #include <linux/types.h> | ||
25 | |||
26 | #include <sound/core.h> | ||
27 | #include <sound/initval.h> | ||
28 | #include <sound/pcm.h> | ||
29 | #include <sound/pcm_params.h> | ||
30 | #include <sound/soc.h> | ||
31 | #include <sound/dmaengine_pcm.h> | ||
32 | |||
33 | #include <mach/dma.h> | ||
34 | |||
35 | #include "imx-pcm.h" | ||
36 | |||
37 | static bool filter(struct dma_chan *chan, void *param) | ||
38 | { | ||
39 | if (!imx_dma_is_general_purpose(chan)) | ||
40 | return false; | ||
41 | |||
42 | chan->private = param; | ||
43 | |||
44 | return true; | ||
45 | } | ||
46 | |||
47 | static int snd_imx_pcm_hw_params(struct snd_pcm_substream *substream, | ||
48 | struct snd_pcm_hw_params *params) | ||
49 | { | ||
50 | struct snd_soc_pcm_runtime *rtd = substream->private_data; | ||
51 | struct dma_chan *chan = snd_dmaengine_pcm_get_chan(substream); | ||
52 | struct imx_pcm_dma_params *dma_params; | ||
53 | struct dma_slave_config slave_config; | ||
54 | int ret; | ||
55 | |||
56 | dma_params = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream); | ||
57 | |||
58 | ret = snd_hwparams_to_dma_slave_config(substream, params, &slave_config); | ||
59 | if (ret) | ||
60 | return ret; | ||
61 | |||
62 | slave_config.device_fc = false; | ||
63 | |||
64 | if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { | ||
65 | slave_config.dst_addr = dma_params->dma_addr; | ||
66 | slave_config.dst_maxburst = dma_params->burstsize; | ||
67 | } else { | ||
68 | slave_config.src_addr = dma_params->dma_addr; | ||
69 | slave_config.src_maxburst = dma_params->burstsize; | ||
70 | } | ||
71 | |||
72 | ret = dmaengine_slave_config(chan, &slave_config); | ||
73 | if (ret) | ||
74 | return ret; | ||
75 | |||
76 | snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer); | ||
77 | |||
78 | return 0; | ||
79 | } | ||
80 | |||
81 | static struct snd_pcm_hardware snd_imx_hardware = { | ||
82 | .info = SNDRV_PCM_INFO_INTERLEAVED | | ||
83 | SNDRV_PCM_INFO_BLOCK_TRANSFER | | ||
84 | SNDRV_PCM_INFO_MMAP | | ||
85 | SNDRV_PCM_INFO_MMAP_VALID | | ||
86 | SNDRV_PCM_INFO_PAUSE | | ||
87 | SNDRV_PCM_INFO_RESUME, | ||
88 | .formats = SNDRV_PCM_FMTBIT_S16_LE, | ||
89 | .rate_min = 8000, | ||
90 | .channels_min = 2, | ||
91 | .channels_max = 2, | ||
92 | .buffer_bytes_max = IMX_SSI_DMABUF_SIZE, | ||
93 | .period_bytes_min = 128, | ||
94 | .period_bytes_max = 65535, /* Limited by SDMA engine */ | ||
95 | .periods_min = 2, | ||
96 | .periods_max = 255, | ||
97 | .fifo_size = 0, | ||
98 | }; | ||
99 | |||
100 | static int snd_imx_open(struct snd_pcm_substream *substream) | ||
101 | { | ||
102 | struct snd_soc_pcm_runtime *rtd = substream->private_data; | ||
103 | struct imx_pcm_dma_params *dma_params; | ||
104 | struct imx_dma_data *dma_data; | ||
105 | int ret; | ||
106 | |||
107 | snd_soc_set_runtime_hwparams(substream, &snd_imx_hardware); | ||
108 | |||
109 | dma_params = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream); | ||
110 | |||
111 | dma_data = kzalloc(sizeof(*dma_data), GFP_KERNEL); | ||
112 | dma_data->peripheral_type = dma_params->shared_peripheral ? | ||
113 | IMX_DMATYPE_SSI_SP : IMX_DMATYPE_SSI; | ||
114 | dma_data->priority = DMA_PRIO_HIGH; | ||
115 | dma_data->dma_request = dma_params->dma; | ||
116 | |||
117 | ret = snd_dmaengine_pcm_open(substream, filter, dma_data); | ||
118 | if (ret) { | ||
119 | kfree(dma_data); | ||
120 | return 0; | ||
121 | } | ||
122 | |||
123 | snd_dmaengine_pcm_set_data(substream, dma_data); | ||
124 | |||
125 | return 0; | ||
126 | } | ||
127 | |||
128 | static int snd_imx_close(struct snd_pcm_substream *substream) | ||
129 | { | ||
130 | struct imx_dma_data *dma_data = snd_dmaengine_pcm_get_data(substream); | ||
131 | |||
132 | snd_dmaengine_pcm_close(substream); | ||
133 | kfree(dma_data); | ||
134 | |||
135 | return 0; | ||
136 | } | ||
137 | |||
138 | static struct snd_pcm_ops imx_pcm_ops = { | ||
139 | .open = snd_imx_open, | ||
140 | .close = snd_imx_close, | ||
141 | .ioctl = snd_pcm_lib_ioctl, | ||
142 | .hw_params = snd_imx_pcm_hw_params, | ||
143 | .trigger = snd_dmaengine_pcm_trigger, | ||
144 | .pointer = snd_dmaengine_pcm_pointer, | ||
145 | .mmap = snd_imx_pcm_mmap, | ||
146 | }; | ||
147 | |||
148 | static struct snd_soc_platform_driver imx_soc_platform_mx2 = { | ||
149 | .ops = &imx_pcm_ops, | ||
150 | .pcm_new = imx_pcm_new, | ||
151 | .pcm_free = imx_pcm_free, | ||
152 | }; | ||
153 | |||
154 | static int __devinit imx_soc_platform_probe(struct platform_device *pdev) | ||
155 | { | ||
156 | return snd_soc_register_platform(&pdev->dev, &imx_soc_platform_mx2); | ||
157 | } | ||
158 | |||
159 | static int __devexit imx_soc_platform_remove(struct platform_device *pdev) | ||
160 | { | ||
161 | snd_soc_unregister_platform(&pdev->dev); | ||
162 | return 0; | ||
163 | } | ||
164 | |||
165 | static struct platform_driver imx_pcm_driver = { | ||
166 | .driver = { | ||
167 | .name = "imx-pcm-audio", | ||
168 | .owner = THIS_MODULE, | ||
169 | }, | ||
170 | .probe = imx_soc_platform_probe, | ||
171 | .remove = __devexit_p(imx_soc_platform_remove), | ||
172 | }; | ||
173 | |||
174 | module_platform_driver(imx_pcm_driver); | ||
175 | MODULE_LICENSE("GPL"); | ||
176 | MODULE_ALIAS("platform:imx-pcm-audio"); | ||
diff --git a/sound/soc/fsl/imx-pcm-fiq.c b/sound/soc/fsl/imx-pcm-fiq.c new file mode 100644 index 000000000000..456b7d723d66 --- /dev/null +++ b/sound/soc/fsl/imx-pcm-fiq.c | |||
@@ -0,0 +1,336 @@ | |||
1 | /* | ||
2 | * imx-pcm-fiq.c -- ALSA Soc Audio Layer | ||
3 | * | ||
4 | * Copyright 2009 Sascha Hauer <s.hauer@pengutronix.de> | ||
5 | * | ||
6 | * This code is based on code copyrighted by Freescale, | ||
7 | * Liam Girdwood, Javier Martin and probably others. | ||
8 | * | ||
9 | * This program is free software; you can redistribute it and/or modify it | ||
10 | * under the terms of the GNU General Public License as published by the | ||
11 | * Free Software Foundation; either version 2 of the License, or (at your | ||
12 | * option) any later version. | ||
13 | */ | ||
14 | #include <linux/clk.h> | ||
15 | #include <linux/delay.h> | ||
16 | #include <linux/device.h> | ||
17 | #include <linux/dma-mapping.h> | ||
18 | #include <linux/init.h> | ||
19 | #include <linux/interrupt.h> | ||
20 | #include <linux/module.h> | ||
21 | #include <linux/platform_device.h> | ||
22 | #include <linux/slab.h> | ||
23 | |||
24 | #include <sound/core.h> | ||
25 | #include <sound/initval.h> | ||
26 | #include <sound/pcm.h> | ||
27 | #include <sound/pcm_params.h> | ||
28 | #include <sound/soc.h> | ||
29 | |||
30 | #include <asm/fiq.h> | ||
31 | |||
32 | #include <mach/ssi.h> | ||
33 | |||
34 | #include "imx-ssi.h" | ||
35 | |||
36 | struct imx_pcm_runtime_data { | ||
37 | int period; | ||
38 | int periods; | ||
39 | unsigned long offset; | ||
40 | unsigned long last_offset; | ||
41 | unsigned long size; | ||
42 | struct hrtimer hrt; | ||
43 | int poll_time_ns; | ||
44 | struct snd_pcm_substream *substream; | ||
45 | atomic_t running; | ||
46 | }; | ||
47 | |||
48 | static enum hrtimer_restart snd_hrtimer_callback(struct hrtimer *hrt) | ||
49 | { | ||
50 | struct imx_pcm_runtime_data *iprtd = | ||
51 | container_of(hrt, struct imx_pcm_runtime_data, hrt); | ||
52 | struct snd_pcm_substream *substream = iprtd->substream; | ||
53 | struct snd_pcm_runtime *runtime = substream->runtime; | ||
54 | struct pt_regs regs; | ||
55 | unsigned long delta; | ||
56 | |||
57 | if (!atomic_read(&iprtd->running)) | ||
58 | return HRTIMER_NORESTART; | ||
59 | |||
60 | get_fiq_regs(®s); | ||
61 | |||
62 | if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) | ||
63 | iprtd->offset = regs.ARM_r8 & 0xffff; | ||
64 | else | ||
65 | iprtd->offset = regs.ARM_r9 & 0xffff; | ||
66 | |||
67 | /* How much data have we transferred since the last period report? */ | ||
68 | if (iprtd->offset >= iprtd->last_offset) | ||
69 | delta = iprtd->offset - iprtd->last_offset; | ||
70 | else | ||
71 | delta = runtime->buffer_size + iprtd->offset | ||
72 | - iprtd->last_offset; | ||
73 | |||
74 | /* If we've transferred at least a period then report it and | ||
75 | * reset our poll time */ | ||
76 | if (delta >= iprtd->period) { | ||
77 | snd_pcm_period_elapsed(substream); | ||
78 | iprtd->last_offset = iprtd->offset; | ||
79 | } | ||
80 | |||
81 | hrtimer_forward_now(hrt, ns_to_ktime(iprtd->poll_time_ns)); | ||
82 | |||
83 | return HRTIMER_RESTART; | ||
84 | } | ||
85 | |||
86 | static struct fiq_handler fh = { | ||
87 | .name = DRV_NAME, | ||
88 | }; | ||
89 | |||
90 | static int snd_imx_pcm_hw_params(struct snd_pcm_substream *substream, | ||
91 | struct snd_pcm_hw_params *params) | ||
92 | { | ||
93 | struct snd_pcm_runtime *runtime = substream->runtime; | ||
94 | struct imx_pcm_runtime_data *iprtd = runtime->private_data; | ||
95 | |||
96 | iprtd->size = params_buffer_bytes(params); | ||
97 | iprtd->periods = params_periods(params); | ||
98 | iprtd->period = params_period_bytes(params) ; | ||
99 | iprtd->offset = 0; | ||
100 | iprtd->last_offset = 0; | ||
101 | iprtd->poll_time_ns = 1000000000 / params_rate(params) * | ||
102 | params_period_size(params); | ||
103 | snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer); | ||
104 | |||
105 | return 0; | ||
106 | } | ||
107 | |||
108 | static int snd_imx_pcm_prepare(struct snd_pcm_substream *substream) | ||
109 | { | ||
110 | struct snd_pcm_runtime *runtime = substream->runtime; | ||
111 | struct imx_pcm_runtime_data *iprtd = runtime->private_data; | ||
112 | struct pt_regs regs; | ||
113 | |||
114 | get_fiq_regs(®s); | ||
115 | if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) | ||
116 | regs.ARM_r8 = (iprtd->period * iprtd->periods - 1) << 16; | ||
117 | else | ||
118 | regs.ARM_r9 = (iprtd->period * iprtd->periods - 1) << 16; | ||
119 | |||
120 | set_fiq_regs(®s); | ||
121 | |||
122 | return 0; | ||
123 | } | ||
124 | |||
125 | static int fiq_enable; | ||
126 | static int imx_pcm_fiq; | ||
127 | |||
128 | static int snd_imx_pcm_trigger(struct snd_pcm_substream *substream, int cmd) | ||
129 | { | ||
130 | struct snd_pcm_runtime *runtime = substream->runtime; | ||
131 | struct imx_pcm_runtime_data *iprtd = runtime->private_data; | ||
132 | |||
133 | switch (cmd) { | ||
134 | case SNDRV_PCM_TRIGGER_START: | ||
135 | case SNDRV_PCM_TRIGGER_RESUME: | ||
136 | case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: | ||
137 | atomic_set(&iprtd->running, 1); | ||
138 | hrtimer_start(&iprtd->hrt, ns_to_ktime(iprtd->poll_time_ns), | ||
139 | HRTIMER_MODE_REL); | ||
140 | if (++fiq_enable == 1) | ||
141 | enable_fiq(imx_pcm_fiq); | ||
142 | |||
143 | break; | ||
144 | |||
145 | case SNDRV_PCM_TRIGGER_STOP: | ||
146 | case SNDRV_PCM_TRIGGER_SUSPEND: | ||
147 | case SNDRV_PCM_TRIGGER_PAUSE_PUSH: | ||
148 | atomic_set(&iprtd->running, 0); | ||
149 | |||
150 | if (--fiq_enable == 0) | ||
151 | disable_fiq(imx_pcm_fiq); | ||
152 | |||
153 | break; | ||
154 | default: | ||
155 | return -EINVAL; | ||
156 | } | ||
157 | |||
158 | return 0; | ||
159 | } | ||
160 | |||
161 | static snd_pcm_uframes_t snd_imx_pcm_pointer(struct snd_pcm_substream *substream) | ||
162 | { | ||
163 | struct snd_pcm_runtime *runtime = substream->runtime; | ||
164 | struct imx_pcm_runtime_data *iprtd = runtime->private_data; | ||
165 | |||
166 | return bytes_to_frames(substream->runtime, iprtd->offset); | ||
167 | } | ||
168 | |||
169 | static struct snd_pcm_hardware snd_imx_hardware = { | ||
170 | .info = SNDRV_PCM_INFO_INTERLEAVED | | ||
171 | SNDRV_PCM_INFO_BLOCK_TRANSFER | | ||
172 | SNDRV_PCM_INFO_MMAP | | ||
173 | SNDRV_PCM_INFO_MMAP_VALID | | ||
174 | SNDRV_PCM_INFO_PAUSE | | ||
175 | SNDRV_PCM_INFO_RESUME, | ||
176 | .formats = SNDRV_PCM_FMTBIT_S16_LE, | ||
177 | .rate_min = 8000, | ||
178 | .channels_min = 2, | ||
179 | .channels_max = 2, | ||
180 | .buffer_bytes_max = IMX_SSI_DMABUF_SIZE, | ||
181 | .period_bytes_min = 128, | ||
182 | .period_bytes_max = 16 * 1024, | ||
183 | .periods_min = 4, | ||
184 | .periods_max = 255, | ||
185 | .fifo_size = 0, | ||
186 | }; | ||
187 | |||
188 | static int snd_imx_open(struct snd_pcm_substream *substream) | ||
189 | { | ||
190 | struct snd_pcm_runtime *runtime = substream->runtime; | ||
191 | struct imx_pcm_runtime_data *iprtd; | ||
192 | int ret; | ||
193 | |||
194 | iprtd = kzalloc(sizeof(*iprtd), GFP_KERNEL); | ||
195 | if (iprtd == NULL) | ||
196 | return -ENOMEM; | ||
197 | runtime->private_data = iprtd; | ||
198 | |||
199 | iprtd->substream = substream; | ||
200 | |||
201 | atomic_set(&iprtd->running, 0); | ||
202 | hrtimer_init(&iprtd->hrt, CLOCK_MONOTONIC, HRTIMER_MODE_REL); | ||
203 | iprtd->hrt.function = snd_hrtimer_callback; | ||
204 | |||
205 | ret = snd_pcm_hw_constraint_integer(substream->runtime, | ||
206 | SNDRV_PCM_HW_PARAM_PERIODS); | ||
207 | if (ret < 0) { | ||
208 | kfree(iprtd); | ||
209 | return ret; | ||
210 | } | ||
211 | |||
212 | snd_soc_set_runtime_hwparams(substream, &snd_imx_hardware); | ||
213 | return 0; | ||
214 | } | ||
215 | |||
216 | static int snd_imx_close(struct snd_pcm_substream *substream) | ||
217 | { | ||
218 | struct snd_pcm_runtime *runtime = substream->runtime; | ||
219 | struct imx_pcm_runtime_data *iprtd = runtime->private_data; | ||
220 | |||
221 | hrtimer_cancel(&iprtd->hrt); | ||
222 | |||
223 | kfree(iprtd); | ||
224 | |||
225 | return 0; | ||
226 | } | ||
227 | |||
228 | static struct snd_pcm_ops imx_pcm_ops = { | ||
229 | .open = snd_imx_open, | ||
230 | .close = snd_imx_close, | ||
231 | .ioctl = snd_pcm_lib_ioctl, | ||
232 | .hw_params = snd_imx_pcm_hw_params, | ||
233 | .prepare = snd_imx_pcm_prepare, | ||
234 | .trigger = snd_imx_pcm_trigger, | ||
235 | .pointer = snd_imx_pcm_pointer, | ||
236 | .mmap = snd_imx_pcm_mmap, | ||
237 | }; | ||
238 | |||
239 | static int ssi_irq = 0; | ||
240 | |||
241 | static int imx_pcm_fiq_new(struct snd_soc_pcm_runtime *rtd) | ||
242 | { | ||
243 | struct snd_pcm *pcm = rtd->pcm; | ||
244 | struct snd_pcm_substream *substream; | ||
245 | int ret; | ||
246 | |||
247 | ret = imx_pcm_new(rtd); | ||
248 | if (ret) | ||
249 | return ret; | ||
250 | |||
251 | substream = pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream; | ||
252 | if (substream) { | ||
253 | struct snd_dma_buffer *buf = &substream->dma_buffer; | ||
254 | |||
255 | imx_ssi_fiq_tx_buffer = (unsigned long)buf->area; | ||
256 | } | ||
257 | |||
258 | substream = pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream; | ||
259 | if (substream) { | ||
260 | struct snd_dma_buffer *buf = &substream->dma_buffer; | ||
261 | |||
262 | imx_ssi_fiq_rx_buffer = (unsigned long)buf->area; | ||
263 | } | ||
264 | |||
265 | set_fiq_handler(&imx_ssi_fiq_start, | ||
266 | &imx_ssi_fiq_end - &imx_ssi_fiq_start); | ||
267 | |||
268 | return 0; | ||
269 | } | ||
270 | |||
271 | static void imx_pcm_fiq_free(struct snd_pcm *pcm) | ||
272 | { | ||
273 | mxc_set_irq_fiq(ssi_irq, 0); | ||
274 | release_fiq(&fh); | ||
275 | imx_pcm_free(pcm); | ||
276 | } | ||
277 | |||
278 | static struct snd_soc_platform_driver imx_soc_platform_fiq = { | ||
279 | .ops = &imx_pcm_ops, | ||
280 | .pcm_new = imx_pcm_fiq_new, | ||
281 | .pcm_free = imx_pcm_fiq_free, | ||
282 | }; | ||
283 | |||
284 | static int __devinit imx_soc_platform_probe(struct platform_device *pdev) | ||
285 | { | ||
286 | struct imx_ssi *ssi = platform_get_drvdata(pdev); | ||
287 | int ret; | ||
288 | |||
289 | ret = claim_fiq(&fh); | ||
290 | if (ret) { | ||
291 | dev_err(&pdev->dev, "failed to claim fiq: %d", ret); | ||
292 | return ret; | ||
293 | } | ||
294 | |||
295 | mxc_set_irq_fiq(ssi->irq, 1); | ||
296 | ssi_irq = ssi->irq; | ||
297 | |||
298 | imx_pcm_fiq = ssi->irq; | ||
299 | |||
300 | imx_ssi_fiq_base = (unsigned long)ssi->base; | ||
301 | |||
302 | ssi->dma_params_tx.burstsize = 4; | ||
303 | ssi->dma_params_rx.burstsize = 6; | ||
304 | |||
305 | ret = snd_soc_register_platform(&pdev->dev, &imx_soc_platform_fiq); | ||
306 | if (ret) | ||
307 | goto failed_register; | ||
308 | |||
309 | return 0; | ||
310 | |||
311 | failed_register: | ||
312 | mxc_set_irq_fiq(ssi_irq, 0); | ||
313 | release_fiq(&fh); | ||
314 | |||
315 | return ret; | ||
316 | } | ||
317 | |||
318 | static int __devexit imx_soc_platform_remove(struct platform_device *pdev) | ||
319 | { | ||
320 | snd_soc_unregister_platform(&pdev->dev); | ||
321 | return 0; | ||
322 | } | ||
323 | |||
324 | static struct platform_driver imx_pcm_driver = { | ||
325 | .driver = { | ||
326 | .name = "imx-fiq-pcm-audio", | ||
327 | .owner = THIS_MODULE, | ||
328 | }, | ||
329 | |||
330 | .probe = imx_soc_platform_probe, | ||
331 | .remove = __devexit_p(imx_soc_platform_remove), | ||
332 | }; | ||
333 | |||
334 | module_platform_driver(imx_pcm_driver); | ||
335 | |||
336 | MODULE_LICENSE("GPL"); | ||
diff --git a/sound/soc/fsl/imx-pcm.c b/sound/soc/fsl/imx-pcm.c new file mode 100644 index 000000000000..93dc360b1777 --- /dev/null +++ b/sound/soc/fsl/imx-pcm.c | |||
@@ -0,0 +1,105 @@ | |||
1 | /* | ||
2 | * Copyright 2009 Sascha Hauer <s.hauer@pengutronix.de> | ||
3 | * | ||
4 | * This code is based on code copyrighted by Freescale, | ||
5 | * Liam Girdwood, Javier Martin and probably others. | ||
6 | * | ||
7 | * This program is free software; you can redistribute it and/or modify it | ||
8 | * under the terms of the GNU General Public License as published by the | ||
9 | * Free Software Foundation; either version 2 of the License, or (at your | ||
10 | * option) any later version. | ||
11 | */ | ||
12 | |||
13 | #include <linux/dma-mapping.h> | ||
14 | #include <linux/module.h> | ||
15 | #include <sound/pcm.h> | ||
16 | #include <sound/soc.h> | ||
17 | #include "imx-pcm.h" | ||
18 | |||
19 | int snd_imx_pcm_mmap(struct snd_pcm_substream *substream, | ||
20 | struct vm_area_struct *vma) | ||
21 | { | ||
22 | struct snd_pcm_runtime *runtime = substream->runtime; | ||
23 | int ret; | ||
24 | |||
25 | ret = dma_mmap_writecombine(substream->pcm->card->dev, vma, | ||
26 | runtime->dma_area, runtime->dma_addr, runtime->dma_bytes); | ||
27 | |||
28 | pr_debug("%s: ret: %d %p 0x%08x 0x%08x\n", __func__, ret, | ||
29 | runtime->dma_area, | ||
30 | runtime->dma_addr, | ||
31 | runtime->dma_bytes); | ||
32 | return ret; | ||
33 | } | ||
34 | EXPORT_SYMBOL_GPL(snd_imx_pcm_mmap); | ||
35 | |||
36 | static int imx_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream) | ||
37 | { | ||
38 | struct snd_pcm_substream *substream = pcm->streams[stream].substream; | ||
39 | struct snd_dma_buffer *buf = &substream->dma_buffer; | ||
40 | size_t size = IMX_SSI_DMABUF_SIZE; | ||
41 | |||
42 | buf->dev.type = SNDRV_DMA_TYPE_DEV; | ||
43 | buf->dev.dev = pcm->card->dev; | ||
44 | buf->private_data = NULL; | ||
45 | buf->area = dma_alloc_writecombine(pcm->card->dev, size, | ||
46 | &buf->addr, GFP_KERNEL); | ||
47 | if (!buf->area) | ||
48 | return -ENOMEM; | ||
49 | buf->bytes = size; | ||
50 | |||
51 | return 0; | ||
52 | } | ||
53 | |||
54 | static u64 imx_pcm_dmamask = DMA_BIT_MASK(32); | ||
55 | |||
56 | int imx_pcm_new(struct snd_soc_pcm_runtime *rtd) | ||
57 | { | ||
58 | struct snd_card *card = rtd->card->snd_card; | ||
59 | struct snd_pcm *pcm = rtd->pcm; | ||
60 | int ret = 0; | ||
61 | |||
62 | if (!card->dev->dma_mask) | ||
63 | card->dev->dma_mask = &imx_pcm_dmamask; | ||
64 | if (!card->dev->coherent_dma_mask) | ||
65 | card->dev->coherent_dma_mask = DMA_BIT_MASK(32); | ||
66 | if (pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream) { | ||
67 | ret = imx_pcm_preallocate_dma_buffer(pcm, | ||
68 | SNDRV_PCM_STREAM_PLAYBACK); | ||
69 | if (ret) | ||
70 | goto out; | ||
71 | } | ||
72 | |||
73 | if (pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream) { | ||
74 | ret = imx_pcm_preallocate_dma_buffer(pcm, | ||
75 | SNDRV_PCM_STREAM_CAPTURE); | ||
76 | if (ret) | ||
77 | goto out; | ||
78 | } | ||
79 | |||
80 | out: | ||
81 | return ret; | ||
82 | } | ||
83 | EXPORT_SYMBOL_GPL(imx_pcm_new); | ||
84 | |||
85 | void imx_pcm_free(struct snd_pcm *pcm) | ||
86 | { | ||
87 | struct snd_pcm_substream *substream; | ||
88 | struct snd_dma_buffer *buf; | ||
89 | int stream; | ||
90 | |||
91 | for (stream = 0; stream < 2; stream++) { | ||
92 | substream = pcm->streams[stream].substream; | ||
93 | if (!substream) | ||
94 | continue; | ||
95 | |||
96 | buf = &substream->dma_buffer; | ||
97 | if (!buf->area) | ||
98 | continue; | ||
99 | |||
100 | dma_free_writecombine(pcm->card->dev, buf->bytes, | ||
101 | buf->area, buf->addr); | ||
102 | buf->area = NULL; | ||
103 | } | ||
104 | } | ||
105 | EXPORT_SYMBOL_GPL(imx_pcm_free); | ||
diff --git a/sound/soc/fsl/imx-pcm.h b/sound/soc/fsl/imx-pcm.h new file mode 100644 index 000000000000..83c0ed7d55c9 --- /dev/null +++ b/sound/soc/fsl/imx-pcm.h | |||
@@ -0,0 +1,33 @@ | |||
1 | /* | ||
2 | * Copyright 2009 Sascha Hauer <s.hauer@pengutronix.de> | ||
3 | * | ||
4 | * This code is based on code copyrighted by Freescale, | ||
5 | * Liam Girdwood, Javier Martin and probably others. | ||
6 | * | ||
7 | * This program is free software; you can redistribute it and/or modify it | ||
8 | * under the terms of the GNU General Public License as published by the | ||
9 | * Free Software Foundation; either version 2 of the License, or (at your | ||
10 | * option) any later version. | ||
11 | */ | ||
12 | |||
13 | #ifndef _IMX_PCM_H | ||
14 | #define _IMX_PCM_H | ||
15 | |||
16 | /* | ||
17 | * Do not change this as the FIQ handler depends on this size | ||
18 | */ | ||
19 | #define IMX_SSI_DMABUF_SIZE (64 * 1024) | ||
20 | |||
21 | struct imx_pcm_dma_params { | ||
22 | int dma; | ||
23 | unsigned long dma_addr; | ||
24 | int burstsize; | ||
25 | bool shared_peripheral; /* The peripheral is on SPBA bus */ | ||
26 | }; | ||
27 | |||
28 | int snd_imx_pcm_mmap(struct snd_pcm_substream *substream, | ||
29 | struct vm_area_struct *vma); | ||
30 | int imx_pcm_new(struct snd_soc_pcm_runtime *rtd); | ||
31 | void imx_pcm_free(struct snd_pcm *pcm); | ||
32 | |||
33 | #endif /* _IMX_PCM_H */ | ||
diff --git a/sound/soc/fsl/imx-sgtl5000.c b/sound/soc/fsl/imx-sgtl5000.c new file mode 100644 index 000000000000..3a729caeb8c8 --- /dev/null +++ b/sound/soc/fsl/imx-sgtl5000.c | |||
@@ -0,0 +1,221 @@ | |||
1 | /* | ||
2 | * Copyright 2012 Freescale Semiconductor, Inc. | ||
3 | * Copyright 2012 Linaro Ltd. | ||
4 | * | ||
5 | * The code contained herein is licensed under the GNU General Public | ||
6 | * License. You may obtain a copy of the GNU General Public License | ||
7 | * Version 2 or later at the following locations: | ||
8 | * | ||
9 | * http://www.opensource.org/licenses/gpl-license.html | ||
10 | * http://www.gnu.org/copyleft/gpl.html | ||
11 | */ | ||
12 | |||
13 | #include <linux/module.h> | ||
14 | #include <linux/of.h> | ||
15 | #include <linux/of_platform.h> | ||
16 | #include <linux/of_i2c.h> | ||
17 | #include <linux/clk.h> | ||
18 | #include <sound/soc.h> | ||
19 | |||
20 | #include "../codecs/sgtl5000.h" | ||
21 | #include "imx-audmux.h" | ||
22 | |||
23 | #define DAI_NAME_SIZE 32 | ||
24 | |||
25 | struct imx_sgtl5000_data { | ||
26 | struct snd_soc_dai_link dai; | ||
27 | struct snd_soc_card card; | ||
28 | char codec_dai_name[DAI_NAME_SIZE]; | ||
29 | char platform_name[DAI_NAME_SIZE]; | ||
30 | struct clk *codec_clk; | ||
31 | unsigned int clk_frequency; | ||
32 | }; | ||
33 | |||
34 | static int imx_sgtl5000_dai_init(struct snd_soc_pcm_runtime *rtd) | ||
35 | { | ||
36 | struct imx_sgtl5000_data *data = container_of(rtd->card, | ||
37 | struct imx_sgtl5000_data, card); | ||
38 | struct device *dev = rtd->card->dev; | ||
39 | int ret; | ||
40 | |||
41 | ret = snd_soc_dai_set_sysclk(rtd->codec_dai, SGTL5000_SYSCLK, | ||
42 | data->clk_frequency, SND_SOC_CLOCK_IN); | ||
43 | if (ret) { | ||
44 | dev_err(dev, "could not set codec driver clock params\n"); | ||
45 | return ret; | ||
46 | } | ||
47 | |||
48 | return 0; | ||
49 | } | ||
50 | |||
51 | static const struct snd_soc_dapm_widget imx_sgtl5000_dapm_widgets[] = { | ||
52 | SND_SOC_DAPM_MIC("Mic Jack", NULL), | ||
53 | SND_SOC_DAPM_LINE("Line In Jack", NULL), | ||
54 | SND_SOC_DAPM_HP("Headphone Jack", NULL), | ||
55 | SND_SOC_DAPM_SPK("Line Out Jack", NULL), | ||
56 | SND_SOC_DAPM_SPK("Ext Spk", NULL), | ||
57 | }; | ||
58 | |||
59 | static int __devinit imx_sgtl5000_probe(struct platform_device *pdev) | ||
60 | { | ||
61 | struct device_node *np = pdev->dev.of_node; | ||
62 | struct device_node *ssi_np, *codec_np; | ||
63 | struct platform_device *ssi_pdev; | ||
64 | struct i2c_client *codec_dev; | ||
65 | struct imx_sgtl5000_data *data; | ||
66 | int int_port, ext_port; | ||
67 | int ret; | ||
68 | |||
69 | ret = of_property_read_u32(np, "mux-int-port", &int_port); | ||
70 | if (ret) { | ||
71 | dev_err(&pdev->dev, "mux-int-port missing or invalid\n"); | ||
72 | return ret; | ||
73 | } | ||
74 | ret = of_property_read_u32(np, "mux-ext-port", &ext_port); | ||
75 | if (ret) { | ||
76 | dev_err(&pdev->dev, "mux-ext-port missing or invalid\n"); | ||
77 | return ret; | ||
78 | } | ||
79 | |||
80 | /* | ||
81 | * The port numbering in the hardware manual starts at 1, while | ||
82 | * the audmux API expects it starts at 0. | ||
83 | */ | ||
84 | int_port--; | ||
85 | ext_port--; | ||
86 | ret = imx_audmux_v2_configure_port(int_port, | ||
87 | IMX_AUDMUX_V2_PTCR_SYN | | ||
88 | IMX_AUDMUX_V2_PTCR_TFSEL(ext_port) | | ||
89 | IMX_AUDMUX_V2_PTCR_TCSEL(ext_port) | | ||
90 | IMX_AUDMUX_V2_PTCR_TFSDIR | | ||
91 | IMX_AUDMUX_V2_PTCR_TCLKDIR, | ||
92 | IMX_AUDMUX_V2_PDCR_RXDSEL(ext_port)); | ||
93 | if (ret) { | ||
94 | dev_err(&pdev->dev, "audmux internal port setup failed\n"); | ||
95 | return ret; | ||
96 | } | ||
97 | imx_audmux_v2_configure_port(ext_port, | ||
98 | IMX_AUDMUX_V2_PTCR_SYN | | ||
99 | IMX_AUDMUX_V2_PTCR_TCSEL(int_port), | ||
100 | IMX_AUDMUX_V2_PDCR_RXDSEL(int_port)); | ||
101 | if (ret) { | ||
102 | dev_err(&pdev->dev, "audmux external port setup failed\n"); | ||
103 | return ret; | ||
104 | } | ||
105 | |||
106 | ssi_np = of_parse_phandle(pdev->dev.of_node, "ssi-controller", 0); | ||
107 | codec_np = of_parse_phandle(pdev->dev.of_node, "audio-codec", 0); | ||
108 | if (!ssi_np || !codec_np) { | ||
109 | dev_err(&pdev->dev, "phandle missing or invalid\n"); | ||
110 | ret = -EINVAL; | ||
111 | goto fail; | ||
112 | } | ||
113 | |||
114 | ssi_pdev = of_find_device_by_node(ssi_np); | ||
115 | if (!ssi_pdev) { | ||
116 | dev_err(&pdev->dev, "failed to find SSI platform device\n"); | ||
117 | ret = -EINVAL; | ||
118 | goto fail; | ||
119 | } | ||
120 | codec_dev = of_find_i2c_device_by_node(codec_np); | ||
121 | if (!codec_dev) { | ||
122 | dev_err(&pdev->dev, "failed to find codec platform device\n"); | ||
123 | return -EINVAL; | ||
124 | } | ||
125 | |||
126 | data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); | ||
127 | if (!data) { | ||
128 | ret = -ENOMEM; | ||
129 | goto fail; | ||
130 | } | ||
131 | |||
132 | data->codec_clk = clk_get(&codec_dev->dev, NULL); | ||
133 | if (IS_ERR(data->codec_clk)) { | ||
134 | /* assuming clock enabled by default */ | ||
135 | data->codec_clk = NULL; | ||
136 | ret = of_property_read_u32(codec_np, "clock-frequency", | ||
137 | &data->clk_frequency); | ||
138 | if (ret) { | ||
139 | dev_err(&codec_dev->dev, | ||
140 | "clock-frequency missing or invalid\n"); | ||
141 | goto fail; | ||
142 | } | ||
143 | } else { | ||
144 | data->clk_frequency = clk_get_rate(data->codec_clk); | ||
145 | clk_prepare_enable(data->codec_clk); | ||
146 | } | ||
147 | |||
148 | data->dai.name = "HiFi"; | ||
149 | data->dai.stream_name = "HiFi"; | ||
150 | data->dai.codec_dai_name = "sgtl5000"; | ||
151 | data->dai.codec_of_node = codec_np; | ||
152 | data->dai.cpu_dai_name = dev_name(&ssi_pdev->dev); | ||
153 | data->dai.platform_name = "imx-pcm-audio"; | ||
154 | data->dai.init = &imx_sgtl5000_dai_init; | ||
155 | data->dai.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | | ||
156 | SND_SOC_DAIFMT_CBM_CFM; | ||
157 | |||
158 | data->card.dev = &pdev->dev; | ||
159 | ret = snd_soc_of_parse_card_name(&data->card, "model"); | ||
160 | if (ret) | ||
161 | goto clk_fail; | ||
162 | ret = snd_soc_of_parse_audio_routing(&data->card, "audio-routing"); | ||
163 | if (ret) | ||
164 | goto clk_fail; | ||
165 | data->card.num_links = 1; | ||
166 | data->card.dai_link = &data->dai; | ||
167 | data->card.dapm_widgets = imx_sgtl5000_dapm_widgets; | ||
168 | data->card.num_dapm_widgets = ARRAY_SIZE(imx_sgtl5000_dapm_widgets); | ||
169 | |||
170 | ret = snd_soc_register_card(&data->card); | ||
171 | if (ret) { | ||
172 | dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret); | ||
173 | goto clk_fail; | ||
174 | } | ||
175 | |||
176 | platform_set_drvdata(pdev, data); | ||
177 | clk_fail: | ||
178 | clk_put(data->codec_clk); | ||
179 | fail: | ||
180 | if (ssi_np) | ||
181 | of_node_put(ssi_np); | ||
182 | if (codec_np) | ||
183 | of_node_put(codec_np); | ||
184 | |||
185 | return ret; | ||
186 | } | ||
187 | |||
188 | static int __devexit imx_sgtl5000_remove(struct platform_device *pdev) | ||
189 | { | ||
190 | struct imx_sgtl5000_data *data = platform_get_drvdata(pdev); | ||
191 | |||
192 | if (data->codec_clk) { | ||
193 | clk_disable_unprepare(data->codec_clk); | ||
194 | clk_put(data->codec_clk); | ||
195 | } | ||
196 | snd_soc_unregister_card(&data->card); | ||
197 | |||
198 | return 0; | ||
199 | } | ||
200 | |||
201 | static const struct of_device_id imx_sgtl5000_dt_ids[] = { | ||
202 | { .compatible = "fsl,imx-audio-sgtl5000", }, | ||
203 | { /* sentinel */ } | ||
204 | }; | ||
205 | MODULE_DEVICE_TABLE(of, imx_sgtl5000_dt_ids); | ||
206 | |||
207 | static struct platform_driver imx_sgtl5000_driver = { | ||
208 | .driver = { | ||
209 | .name = "imx-sgtl5000", | ||
210 | .owner = THIS_MODULE, | ||
211 | .of_match_table = imx_sgtl5000_dt_ids, | ||
212 | }, | ||
213 | .probe = imx_sgtl5000_probe, | ||
214 | .remove = __devexit_p(imx_sgtl5000_remove), | ||
215 | }; | ||
216 | module_platform_driver(imx_sgtl5000_driver); | ||
217 | |||
218 | MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>"); | ||
219 | MODULE_DESCRIPTION("Freescale i.MX SGTL5000 ASoC machine driver"); | ||
220 | MODULE_LICENSE("GPL v2"); | ||
221 | MODULE_ALIAS("platform:imx-sgtl5000"); | ||
diff --git a/sound/soc/fsl/imx-ssi.c b/sound/soc/fsl/imx-ssi.c new file mode 100644 index 000000000000..cf3ed0362c9c --- /dev/null +++ b/sound/soc/fsl/imx-ssi.c | |||
@@ -0,0 +1,690 @@ | |||
1 | /* | ||
2 | * imx-ssi.c -- ALSA Soc Audio Layer | ||
3 | * | ||
4 | * Copyright 2009 Sascha Hauer <s.hauer@pengutronix.de> | ||
5 | * | ||
6 | * This code is based on code copyrighted by Freescale, | ||
7 | * Liam Girdwood, Javier Martin and probably others. | ||
8 | * | ||
9 | * This program is free software; you can redistribute it and/or modify it | ||
10 | * under the terms of the GNU General Public License as published by the | ||
11 | * Free Software Foundation; either version 2 of the License, or (at your | ||
12 | * option) any later version. | ||
13 | * | ||
14 | * | ||
15 | * The i.MX SSI core has some nasty limitations in AC97 mode. While most | ||
16 | * sane processor vendors have a FIFO per AC97 slot, the i.MX has only | ||
17 | * one FIFO which combines all valid receive slots. We cannot even select | ||
18 | * which slots we want to receive. The WM9712 with which this driver | ||
19 | * was developed with always sends GPIO status data in slot 12 which | ||
20 | * we receive in our (PCM-) data stream. The only chance we have is to | ||
21 | * manually skip this data in the FIQ handler. With sampling rates different | ||
22 | * from 48000Hz not every frame has valid receive data, so the ratio | ||
23 | * between pcm data and GPIO status data changes. Our FIQ handler is not | ||
24 | * able to handle this, hence this driver only works with 48000Hz sampling | ||
25 | * rate. | ||
26 | * Reading and writing AC97 registers is another challenge. The core | ||
27 | * provides us status bits when the read register is updated with *another* | ||
28 | * value. When we read the same register two times (and the register still | ||
29 | * contains the same value) these status bits are not set. We work | ||
30 | * around this by not polling these bits but only wait a fixed delay. | ||
31 | * | ||
32 | */ | ||
33 | |||
34 | #include <linux/clk.h> | ||
35 | #include <linux/delay.h> | ||
36 | #include <linux/device.h> | ||
37 | #include <linux/dma-mapping.h> | ||
38 | #include <linux/init.h> | ||
39 | #include <linux/interrupt.h> | ||
40 | #include <linux/module.h> | ||
41 | #include <linux/platform_device.h> | ||
42 | #include <linux/slab.h> | ||
43 | |||
44 | #include <sound/core.h> | ||
45 | #include <sound/initval.h> | ||
46 | #include <sound/pcm.h> | ||
47 | #include <sound/pcm_params.h> | ||
48 | #include <sound/soc.h> | ||
49 | |||
50 | #include <mach/ssi.h> | ||
51 | #include <mach/hardware.h> | ||
52 | |||
53 | #include "imx-ssi.h" | ||
54 | |||
55 | #define SSI_SACNT_DEFAULT (SSI_SACNT_AC97EN | SSI_SACNT_FV) | ||
56 | |||
57 | /* | ||
58 | * SSI Network Mode or TDM slots configuration. | ||
59 | * Should only be called when port is inactive (i.e. SSIEN = 0). | ||
60 | */ | ||
61 | static int imx_ssi_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai, | ||
62 | unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width) | ||
63 | { | ||
64 | struct imx_ssi *ssi = snd_soc_dai_get_drvdata(cpu_dai); | ||
65 | u32 sccr; | ||
66 | |||
67 | sccr = readl(ssi->base + SSI_STCCR); | ||
68 | sccr &= ~SSI_STCCR_DC_MASK; | ||
69 | sccr |= SSI_STCCR_DC(slots - 1); | ||
70 | writel(sccr, ssi->base + SSI_STCCR); | ||
71 | |||
72 | sccr = readl(ssi->base + SSI_SRCCR); | ||
73 | sccr &= ~SSI_STCCR_DC_MASK; | ||
74 | sccr |= SSI_STCCR_DC(slots - 1); | ||
75 | writel(sccr, ssi->base + SSI_SRCCR); | ||
76 | |||
77 | writel(tx_mask, ssi->base + SSI_STMSK); | ||
78 | writel(rx_mask, ssi->base + SSI_SRMSK); | ||
79 | |||
80 | return 0; | ||
81 | } | ||
82 | |||
83 | /* | ||
84 | * SSI DAI format configuration. | ||
85 | * Should only be called when port is inactive (i.e. SSIEN = 0). | ||
86 | */ | ||
87 | static int imx_ssi_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt) | ||
88 | { | ||
89 | struct imx_ssi *ssi = snd_soc_dai_get_drvdata(cpu_dai); | ||
90 | u32 strcr = 0, scr; | ||
91 | |||
92 | scr = readl(ssi->base + SSI_SCR) & ~(SSI_SCR_SYN | SSI_SCR_NET); | ||
93 | |||
94 | /* DAI mode */ | ||
95 | switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { | ||
96 | case SND_SOC_DAIFMT_I2S: | ||
97 | /* data on rising edge of bclk, frame low 1clk before data */ | ||
98 | strcr |= SSI_STCR_TFSI | SSI_STCR_TEFS | SSI_STCR_TXBIT0; | ||
99 | scr |= SSI_SCR_NET; | ||
100 | if (ssi->flags & IMX_SSI_USE_I2S_SLAVE) { | ||
101 | scr &= ~SSI_I2S_MODE_MASK; | ||
102 | scr |= SSI_SCR_I2S_MODE_SLAVE; | ||
103 | } | ||
104 | break; | ||
105 | case SND_SOC_DAIFMT_LEFT_J: | ||
106 | /* data on rising edge of bclk, frame high with data */ | ||
107 | strcr |= SSI_STCR_TXBIT0; | ||
108 | break; | ||
109 | case SND_SOC_DAIFMT_DSP_B: | ||
110 | /* data on rising edge of bclk, frame high with data */ | ||
111 | strcr |= SSI_STCR_TFSL | SSI_STCR_TXBIT0; | ||
112 | break; | ||
113 | case SND_SOC_DAIFMT_DSP_A: | ||
114 | /* data on rising edge of bclk, frame high 1clk before data */ | ||
115 | strcr |= SSI_STCR_TFSL | SSI_STCR_TXBIT0 | SSI_STCR_TEFS; | ||
116 | break; | ||
117 | } | ||
118 | |||
119 | /* DAI clock inversion */ | ||
120 | switch (fmt & SND_SOC_DAIFMT_INV_MASK) { | ||
121 | case SND_SOC_DAIFMT_IB_IF: | ||
122 | strcr |= SSI_STCR_TFSI; | ||
123 | strcr &= ~SSI_STCR_TSCKP; | ||
124 | break; | ||
125 | case SND_SOC_DAIFMT_IB_NF: | ||
126 | strcr &= ~(SSI_STCR_TSCKP | SSI_STCR_TFSI); | ||
127 | break; | ||
128 | case SND_SOC_DAIFMT_NB_IF: | ||
129 | strcr |= SSI_STCR_TFSI | SSI_STCR_TSCKP; | ||
130 | break; | ||
131 | case SND_SOC_DAIFMT_NB_NF: | ||
132 | strcr &= ~SSI_STCR_TFSI; | ||
133 | strcr |= SSI_STCR_TSCKP; | ||
134 | break; | ||
135 | } | ||
136 | |||
137 | /* DAI clock master masks */ | ||
138 | switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { | ||
139 | case SND_SOC_DAIFMT_CBM_CFM: | ||
140 | break; | ||
141 | default: | ||
142 | /* Master mode not implemented, needs handling of clocks. */ | ||
143 | return -EINVAL; | ||
144 | } | ||
145 | |||
146 | strcr |= SSI_STCR_TFEN0; | ||
147 | |||
148 | if (ssi->flags & IMX_SSI_NET) | ||
149 | scr |= SSI_SCR_NET; | ||
150 | if (ssi->flags & IMX_SSI_SYN) | ||
151 | scr |= SSI_SCR_SYN; | ||
152 | |||
153 | writel(strcr, ssi->base + SSI_STCR); | ||
154 | writel(strcr, ssi->base + SSI_SRCR); | ||
155 | writel(scr, ssi->base + SSI_SCR); | ||
156 | |||
157 | return 0; | ||
158 | } | ||
159 | |||
160 | /* | ||
161 | * SSI system clock configuration. | ||
162 | * Should only be called when port is inactive (i.e. SSIEN = 0). | ||
163 | */ | ||
164 | static int imx_ssi_set_dai_sysclk(struct snd_soc_dai *cpu_dai, | ||
165 | int clk_id, unsigned int freq, int dir) | ||
166 | { | ||
167 | struct imx_ssi *ssi = snd_soc_dai_get_drvdata(cpu_dai); | ||
168 | u32 scr; | ||
169 | |||
170 | scr = readl(ssi->base + SSI_SCR); | ||
171 | |||
172 | switch (clk_id) { | ||
173 | case IMX_SSP_SYS_CLK: | ||
174 | if (dir == SND_SOC_CLOCK_OUT) | ||
175 | scr |= SSI_SCR_SYS_CLK_EN; | ||
176 | else | ||
177 | scr &= ~SSI_SCR_SYS_CLK_EN; | ||
178 | break; | ||
179 | default: | ||
180 | return -EINVAL; | ||
181 | } | ||
182 | |||
183 | writel(scr, ssi->base + SSI_SCR); | ||
184 | |||
185 | return 0; | ||
186 | } | ||
187 | |||
188 | /* | ||
189 | * SSI Clock dividers | ||
190 | * Should only be called when port is inactive (i.e. SSIEN = 0). | ||
191 | */ | ||
192 | static int imx_ssi_set_dai_clkdiv(struct snd_soc_dai *cpu_dai, | ||
193 | int div_id, int div) | ||
194 | { | ||
195 | struct imx_ssi *ssi = snd_soc_dai_get_drvdata(cpu_dai); | ||
196 | u32 stccr, srccr; | ||
197 | |||
198 | stccr = readl(ssi->base + SSI_STCCR); | ||
199 | srccr = readl(ssi->base + SSI_SRCCR); | ||
200 | |||
201 | switch (div_id) { | ||
202 | case IMX_SSI_TX_DIV_2: | ||
203 | stccr &= ~SSI_STCCR_DIV2; | ||
204 | stccr |= div; | ||
205 | break; | ||
206 | case IMX_SSI_TX_DIV_PSR: | ||
207 | stccr &= ~SSI_STCCR_PSR; | ||
208 | stccr |= div; | ||
209 | break; | ||
210 | case IMX_SSI_TX_DIV_PM: | ||
211 | stccr &= ~0xff; | ||
212 | stccr |= SSI_STCCR_PM(div); | ||
213 | break; | ||
214 | case IMX_SSI_RX_DIV_2: | ||
215 | stccr &= ~SSI_STCCR_DIV2; | ||
216 | stccr |= div; | ||
217 | break; | ||
218 | case IMX_SSI_RX_DIV_PSR: | ||
219 | stccr &= ~SSI_STCCR_PSR; | ||
220 | stccr |= div; | ||
221 | break; | ||
222 | case IMX_SSI_RX_DIV_PM: | ||
223 | stccr &= ~0xff; | ||
224 | stccr |= SSI_STCCR_PM(div); | ||
225 | break; | ||
226 | default: | ||
227 | return -EINVAL; | ||
228 | } | ||
229 | |||
230 | writel(stccr, ssi->base + SSI_STCCR); | ||
231 | writel(srccr, ssi->base + SSI_SRCCR); | ||
232 | |||
233 | return 0; | ||
234 | } | ||
235 | |||
236 | static int imx_ssi_startup(struct snd_pcm_substream *substream, | ||
237 | struct snd_soc_dai *cpu_dai) | ||
238 | { | ||
239 | struct imx_ssi *ssi = snd_soc_dai_get_drvdata(cpu_dai); | ||
240 | struct imx_pcm_dma_params *dma_data; | ||
241 | |||
242 | /* Tx/Rx config */ | ||
243 | if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) | ||
244 | dma_data = &ssi->dma_params_tx; | ||
245 | else | ||
246 | dma_data = &ssi->dma_params_rx; | ||
247 | |||
248 | snd_soc_dai_set_dma_data(cpu_dai, substream, dma_data); | ||
249 | |||
250 | return 0; | ||
251 | } | ||
252 | |||
253 | /* | ||
254 | * Should only be called when port is inactive (i.e. SSIEN = 0), | ||
255 | * although can be called multiple times by upper layers. | ||
256 | */ | ||
257 | static int imx_ssi_hw_params(struct snd_pcm_substream *substream, | ||
258 | struct snd_pcm_hw_params *params, | ||
259 | struct snd_soc_dai *cpu_dai) | ||
260 | { | ||
261 | struct imx_ssi *ssi = snd_soc_dai_get_drvdata(cpu_dai); | ||
262 | u32 reg, sccr; | ||
263 | |||
264 | /* Tx/Rx config */ | ||
265 | if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) | ||
266 | reg = SSI_STCCR; | ||
267 | else | ||
268 | reg = SSI_SRCCR; | ||
269 | |||
270 | if (ssi->flags & IMX_SSI_SYN) | ||
271 | reg = SSI_STCCR; | ||
272 | |||
273 | sccr = readl(ssi->base + reg) & ~SSI_STCCR_WL_MASK; | ||
274 | |||
275 | /* DAI data (word) size */ | ||
276 | switch (params_format(params)) { | ||
277 | case SNDRV_PCM_FORMAT_S16_LE: | ||
278 | sccr |= SSI_SRCCR_WL(16); | ||
279 | break; | ||
280 | case SNDRV_PCM_FORMAT_S20_3LE: | ||
281 | sccr |= SSI_SRCCR_WL(20); | ||
282 | break; | ||
283 | case SNDRV_PCM_FORMAT_S24_LE: | ||
284 | sccr |= SSI_SRCCR_WL(24); | ||
285 | break; | ||
286 | } | ||
287 | |||
288 | writel(sccr, ssi->base + reg); | ||
289 | |||
290 | return 0; | ||
291 | } | ||
292 | |||
293 | static int imx_ssi_trigger(struct snd_pcm_substream *substream, int cmd, | ||
294 | struct snd_soc_dai *dai) | ||
295 | { | ||
296 | struct imx_ssi *ssi = snd_soc_dai_get_drvdata(dai); | ||
297 | unsigned int sier_bits, sier; | ||
298 | unsigned int scr; | ||
299 | |||
300 | scr = readl(ssi->base + SSI_SCR); | ||
301 | sier = readl(ssi->base + SSI_SIER); | ||
302 | |||
303 | if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { | ||
304 | if (ssi->flags & IMX_SSI_DMA) | ||
305 | sier_bits = SSI_SIER_TDMAE; | ||
306 | else | ||
307 | sier_bits = SSI_SIER_TIE | SSI_SIER_TFE0_EN; | ||
308 | } else { | ||
309 | if (ssi->flags & IMX_SSI_DMA) | ||
310 | sier_bits = SSI_SIER_RDMAE; | ||
311 | else | ||
312 | sier_bits = SSI_SIER_RIE | SSI_SIER_RFF0_EN; | ||
313 | } | ||
314 | |||
315 | switch (cmd) { | ||
316 | case SNDRV_PCM_TRIGGER_START: | ||
317 | case SNDRV_PCM_TRIGGER_RESUME: | ||
318 | case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: | ||
319 | if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) | ||
320 | scr |= SSI_SCR_TE; | ||
321 | else | ||
322 | scr |= SSI_SCR_RE; | ||
323 | sier |= sier_bits; | ||
324 | |||
325 | if (++ssi->enabled == 1) | ||
326 | scr |= SSI_SCR_SSIEN; | ||
327 | |||
328 | break; | ||
329 | |||
330 | case SNDRV_PCM_TRIGGER_STOP: | ||
331 | case SNDRV_PCM_TRIGGER_SUSPEND: | ||
332 | case SNDRV_PCM_TRIGGER_PAUSE_PUSH: | ||
333 | if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) | ||
334 | scr &= ~SSI_SCR_TE; | ||
335 | else | ||
336 | scr &= ~SSI_SCR_RE; | ||
337 | sier &= ~sier_bits; | ||
338 | |||
339 | if (--ssi->enabled == 0) | ||
340 | scr &= ~SSI_SCR_SSIEN; | ||
341 | |||
342 | break; | ||
343 | default: | ||
344 | return -EINVAL; | ||
345 | } | ||
346 | |||
347 | if (!(ssi->flags & IMX_SSI_USE_AC97)) | ||
348 | /* rx/tx are always enabled to access ac97 registers */ | ||
349 | writel(scr, ssi->base + SSI_SCR); | ||
350 | |||
351 | writel(sier, ssi->base + SSI_SIER); | ||
352 | |||
353 | return 0; | ||
354 | } | ||
355 | |||
356 | static const struct snd_soc_dai_ops imx_ssi_pcm_dai_ops = { | ||
357 | .startup = imx_ssi_startup, | ||
358 | .hw_params = imx_ssi_hw_params, | ||
359 | .set_fmt = imx_ssi_set_dai_fmt, | ||
360 | .set_clkdiv = imx_ssi_set_dai_clkdiv, | ||
361 | .set_sysclk = imx_ssi_set_dai_sysclk, | ||
362 | .set_tdm_slot = imx_ssi_set_dai_tdm_slot, | ||
363 | .trigger = imx_ssi_trigger, | ||
364 | }; | ||
365 | |||
366 | static int imx_ssi_dai_probe(struct snd_soc_dai *dai) | ||
367 | { | ||
368 | struct imx_ssi *ssi = dev_get_drvdata(dai->dev); | ||
369 | uint32_t val; | ||
370 | |||
371 | snd_soc_dai_set_drvdata(dai, ssi); | ||
372 | |||
373 | val = SSI_SFCSR_TFWM0(ssi->dma_params_tx.burstsize) | | ||
374 | SSI_SFCSR_RFWM0(ssi->dma_params_rx.burstsize); | ||
375 | writel(val, ssi->base + SSI_SFCSR); | ||
376 | |||
377 | return 0; | ||
378 | } | ||
379 | |||
380 | static struct snd_soc_dai_driver imx_ssi_dai = { | ||
381 | .probe = imx_ssi_dai_probe, | ||
382 | .playback = { | ||
383 | .channels_min = 1, | ||
384 | .channels_max = 2, | ||
385 | .rates = SNDRV_PCM_RATE_8000_96000, | ||
386 | .formats = SNDRV_PCM_FMTBIT_S16_LE, | ||
387 | }, | ||
388 | .capture = { | ||
389 | .channels_min = 1, | ||
390 | .channels_max = 2, | ||
391 | .rates = SNDRV_PCM_RATE_8000_96000, | ||
392 | .formats = SNDRV_PCM_FMTBIT_S16_LE, | ||
393 | }, | ||
394 | .ops = &imx_ssi_pcm_dai_ops, | ||
395 | }; | ||
396 | |||
397 | static struct snd_soc_dai_driver imx_ac97_dai = { | ||
398 | .probe = imx_ssi_dai_probe, | ||
399 | .ac97_control = 1, | ||
400 | .playback = { | ||
401 | .stream_name = "AC97 Playback", | ||
402 | .channels_min = 2, | ||
403 | .channels_max = 2, | ||
404 | .rates = SNDRV_PCM_RATE_48000, | ||
405 | .formats = SNDRV_PCM_FMTBIT_S16_LE, | ||
406 | }, | ||
407 | .capture = { | ||
408 | .stream_name = "AC97 Capture", | ||
409 | .channels_min = 2, | ||
410 | .channels_max = 2, | ||
411 | .rates = SNDRV_PCM_RATE_48000, | ||
412 | .formats = SNDRV_PCM_FMTBIT_S16_LE, | ||
413 | }, | ||
414 | .ops = &imx_ssi_pcm_dai_ops, | ||
415 | }; | ||
416 | |||
417 | static void setup_channel_to_ac97(struct imx_ssi *imx_ssi) | ||
418 | { | ||
419 | void __iomem *base = imx_ssi->base; | ||
420 | |||
421 | writel(0x0, base + SSI_SCR); | ||
422 | writel(0x0, base + SSI_STCR); | ||
423 | writel(0x0, base + SSI_SRCR); | ||
424 | |||
425 | writel(SSI_SCR_SYN | SSI_SCR_NET, base + SSI_SCR); | ||
426 | |||
427 | writel(SSI_SFCSR_RFWM0(8) | | ||
428 | SSI_SFCSR_TFWM0(8) | | ||
429 | SSI_SFCSR_RFWM1(8) | | ||
430 | SSI_SFCSR_TFWM1(8), base + SSI_SFCSR); | ||
431 | |||
432 | writel(SSI_STCCR_WL(16) | SSI_STCCR_DC(12), base + SSI_STCCR); | ||
433 | writel(SSI_STCCR_WL(16) | SSI_STCCR_DC(12), base + SSI_SRCCR); | ||
434 | |||
435 | writel(SSI_SCR_SYN | SSI_SCR_NET | SSI_SCR_SSIEN, base + SSI_SCR); | ||
436 | writel(SSI_SOR_WAIT(3), base + SSI_SOR); | ||
437 | |||
438 | writel(SSI_SCR_SYN | SSI_SCR_NET | SSI_SCR_SSIEN | | ||
439 | SSI_SCR_TE | SSI_SCR_RE, | ||
440 | base + SSI_SCR); | ||
441 | |||
442 | writel(SSI_SACNT_DEFAULT, base + SSI_SACNT); | ||
443 | writel(0xff, base + SSI_SACCDIS); | ||
444 | writel(0x300, base + SSI_SACCEN); | ||
445 | } | ||
446 | |||
447 | static struct imx_ssi *ac97_ssi; | ||
448 | |||
449 | static void imx_ssi_ac97_write(struct snd_ac97 *ac97, unsigned short reg, | ||
450 | unsigned short val) | ||
451 | { | ||
452 | struct imx_ssi *imx_ssi = ac97_ssi; | ||
453 | void __iomem *base = imx_ssi->base; | ||
454 | unsigned int lreg; | ||
455 | unsigned int lval; | ||
456 | |||
457 | if (reg > 0x7f) | ||
458 | return; | ||
459 | |||
460 | pr_debug("%s: 0x%02x 0x%04x\n", __func__, reg, val); | ||
461 | |||
462 | lreg = reg << 12; | ||
463 | writel(lreg, base + SSI_SACADD); | ||
464 | |||
465 | lval = val << 4; | ||
466 | writel(lval , base + SSI_SACDAT); | ||
467 | |||
468 | writel(SSI_SACNT_DEFAULT | SSI_SACNT_WR, base + SSI_SACNT); | ||
469 | udelay(100); | ||
470 | } | ||
471 | |||
472 | static unsigned short imx_ssi_ac97_read(struct snd_ac97 *ac97, | ||
473 | unsigned short reg) | ||
474 | { | ||
475 | struct imx_ssi *imx_ssi = ac97_ssi; | ||
476 | void __iomem *base = imx_ssi->base; | ||
477 | |||
478 | unsigned short val = -1; | ||
479 | unsigned int lreg; | ||
480 | |||
481 | lreg = (reg & 0x7f) << 12 ; | ||
482 | writel(lreg, base + SSI_SACADD); | ||
483 | writel(SSI_SACNT_DEFAULT | SSI_SACNT_RD, base + SSI_SACNT); | ||
484 | |||
485 | udelay(100); | ||
486 | |||
487 | val = (readl(base + SSI_SACDAT) >> 4) & 0xffff; | ||
488 | |||
489 | pr_debug("%s: 0x%02x 0x%04x\n", __func__, reg, val); | ||
490 | |||
491 | return val; | ||
492 | } | ||
493 | |||
494 | static void imx_ssi_ac97_reset(struct snd_ac97 *ac97) | ||
495 | { | ||
496 | struct imx_ssi *imx_ssi = ac97_ssi; | ||
497 | |||
498 | if (imx_ssi->ac97_reset) | ||
499 | imx_ssi->ac97_reset(ac97); | ||
500 | } | ||
501 | |||
502 | static void imx_ssi_ac97_warm_reset(struct snd_ac97 *ac97) | ||
503 | { | ||
504 | struct imx_ssi *imx_ssi = ac97_ssi; | ||
505 | |||
506 | if (imx_ssi->ac97_warm_reset) | ||
507 | imx_ssi->ac97_warm_reset(ac97); | ||
508 | } | ||
509 | |||
510 | struct snd_ac97_bus_ops soc_ac97_ops = { | ||
511 | .read = imx_ssi_ac97_read, | ||
512 | .write = imx_ssi_ac97_write, | ||
513 | .reset = imx_ssi_ac97_reset, | ||
514 | .warm_reset = imx_ssi_ac97_warm_reset | ||
515 | }; | ||
516 | EXPORT_SYMBOL_GPL(soc_ac97_ops); | ||
517 | |||
518 | static int imx_ssi_probe(struct platform_device *pdev) | ||
519 | { | ||
520 | struct resource *res; | ||
521 | struct imx_ssi *ssi; | ||
522 | struct imx_ssi_platform_data *pdata = pdev->dev.platform_data; | ||
523 | int ret = 0; | ||
524 | struct snd_soc_dai_driver *dai; | ||
525 | |||
526 | ssi = kzalloc(sizeof(*ssi), GFP_KERNEL); | ||
527 | if (!ssi) | ||
528 | return -ENOMEM; | ||
529 | dev_set_drvdata(&pdev->dev, ssi); | ||
530 | |||
531 | if (pdata) { | ||
532 | ssi->ac97_reset = pdata->ac97_reset; | ||
533 | ssi->ac97_warm_reset = pdata->ac97_warm_reset; | ||
534 | ssi->flags = pdata->flags; | ||
535 | } | ||
536 | |||
537 | ssi->irq = platform_get_irq(pdev, 0); | ||
538 | |||
539 | ssi->clk = clk_get(&pdev->dev, NULL); | ||
540 | if (IS_ERR(ssi->clk)) { | ||
541 | ret = PTR_ERR(ssi->clk); | ||
542 | dev_err(&pdev->dev, "Cannot get the clock: %d\n", | ||
543 | ret); | ||
544 | goto failed_clk; | ||
545 | } | ||
546 | clk_enable(ssi->clk); | ||
547 | |||
548 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | ||
549 | if (!res) { | ||
550 | ret = -ENODEV; | ||
551 | goto failed_get_resource; | ||
552 | } | ||
553 | |||
554 | if (!request_mem_region(res->start, resource_size(res), DRV_NAME)) { | ||
555 | dev_err(&pdev->dev, "request_mem_region failed\n"); | ||
556 | ret = -EBUSY; | ||
557 | goto failed_get_resource; | ||
558 | } | ||
559 | |||
560 | ssi->base = ioremap(res->start, resource_size(res)); | ||
561 | if (!ssi->base) { | ||
562 | dev_err(&pdev->dev, "ioremap failed\n"); | ||
563 | ret = -ENODEV; | ||
564 | goto failed_ioremap; | ||
565 | } | ||
566 | |||
567 | if (ssi->flags & IMX_SSI_USE_AC97) { | ||
568 | if (ac97_ssi) { | ||
569 | ret = -EBUSY; | ||
570 | goto failed_ac97; | ||
571 | } | ||
572 | ac97_ssi = ssi; | ||
573 | setup_channel_to_ac97(ssi); | ||
574 | dai = &imx_ac97_dai; | ||
575 | } else | ||
576 | dai = &imx_ssi_dai; | ||
577 | |||
578 | writel(0x0, ssi->base + SSI_SIER); | ||
579 | |||
580 | ssi->dma_params_rx.dma_addr = res->start + SSI_SRX0; | ||
581 | ssi->dma_params_tx.dma_addr = res->start + SSI_STX0; | ||
582 | |||
583 | ssi->dma_params_tx.burstsize = 6; | ||
584 | ssi->dma_params_rx.burstsize = 4; | ||
585 | |||
586 | res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx0"); | ||
587 | if (res) | ||
588 | ssi->dma_params_tx.dma = res->start; | ||
589 | |||
590 | res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx0"); | ||
591 | if (res) | ||
592 | ssi->dma_params_rx.dma = res->start; | ||
593 | |||
594 | platform_set_drvdata(pdev, ssi); | ||
595 | |||
596 | ret = snd_soc_register_dai(&pdev->dev, dai); | ||
597 | if (ret) { | ||
598 | dev_err(&pdev->dev, "register DAI failed\n"); | ||
599 | goto failed_register; | ||
600 | } | ||
601 | |||
602 | ssi->soc_platform_pdev_fiq = platform_device_alloc("imx-fiq-pcm-audio", pdev->id); | ||
603 | if (!ssi->soc_platform_pdev_fiq) { | ||
604 | ret = -ENOMEM; | ||
605 | goto failed_pdev_fiq_alloc; | ||
606 | } | ||
607 | |||
608 | platform_set_drvdata(ssi->soc_platform_pdev_fiq, ssi); | ||
609 | ret = platform_device_add(ssi->soc_platform_pdev_fiq); | ||
610 | if (ret) { | ||
611 | dev_err(&pdev->dev, "failed to add platform device\n"); | ||
612 | goto failed_pdev_fiq_add; | ||
613 | } | ||
614 | |||
615 | ssi->soc_platform_pdev = platform_device_alloc("imx-pcm-audio", pdev->id); | ||
616 | if (!ssi->soc_platform_pdev) { | ||
617 | ret = -ENOMEM; | ||
618 | goto failed_pdev_alloc; | ||
619 | } | ||
620 | |||
621 | platform_set_drvdata(ssi->soc_platform_pdev, ssi); | ||
622 | ret = platform_device_add(ssi->soc_platform_pdev); | ||
623 | if (ret) { | ||
624 | dev_err(&pdev->dev, "failed to add platform device\n"); | ||
625 | goto failed_pdev_add; | ||
626 | } | ||
627 | |||
628 | return 0; | ||
629 | |||
630 | failed_pdev_add: | ||
631 | platform_device_put(ssi->soc_platform_pdev); | ||
632 | failed_pdev_alloc: | ||
633 | platform_device_del(ssi->soc_platform_pdev_fiq); | ||
634 | failed_pdev_fiq_add: | ||
635 | platform_device_put(ssi->soc_platform_pdev_fiq); | ||
636 | failed_pdev_fiq_alloc: | ||
637 | snd_soc_unregister_dai(&pdev->dev); | ||
638 | failed_register: | ||
639 | failed_ac97: | ||
640 | iounmap(ssi->base); | ||
641 | failed_ioremap: | ||
642 | release_mem_region(res->start, resource_size(res)); | ||
643 | failed_get_resource: | ||
644 | clk_disable(ssi->clk); | ||
645 | clk_put(ssi->clk); | ||
646 | failed_clk: | ||
647 | kfree(ssi); | ||
648 | |||
649 | return ret; | ||
650 | } | ||
651 | |||
652 | static int __devexit imx_ssi_remove(struct platform_device *pdev) | ||
653 | { | ||
654 | struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | ||
655 | struct imx_ssi *ssi = platform_get_drvdata(pdev); | ||
656 | |||
657 | platform_device_unregister(ssi->soc_platform_pdev); | ||
658 | platform_device_unregister(ssi->soc_platform_pdev_fiq); | ||
659 | |||
660 | snd_soc_unregister_dai(&pdev->dev); | ||
661 | |||
662 | if (ssi->flags & IMX_SSI_USE_AC97) | ||
663 | ac97_ssi = NULL; | ||
664 | |||
665 | iounmap(ssi->base); | ||
666 | release_mem_region(res->start, resource_size(res)); | ||
667 | clk_disable(ssi->clk); | ||
668 | clk_put(ssi->clk); | ||
669 | kfree(ssi); | ||
670 | |||
671 | return 0; | ||
672 | } | ||
673 | |||
674 | static struct platform_driver imx_ssi_driver = { | ||
675 | .probe = imx_ssi_probe, | ||
676 | .remove = __devexit_p(imx_ssi_remove), | ||
677 | |||
678 | .driver = { | ||
679 | .name = "imx-ssi", | ||
680 | .owner = THIS_MODULE, | ||
681 | }, | ||
682 | }; | ||
683 | |||
684 | module_platform_driver(imx_ssi_driver); | ||
685 | |||
686 | /* Module information */ | ||
687 | MODULE_AUTHOR("Sascha Hauer, <s.hauer@pengutronix.de>"); | ||
688 | MODULE_DESCRIPTION("i.MX I2S/ac97 SoC Interface"); | ||
689 | MODULE_LICENSE("GPL"); | ||
690 | MODULE_ALIAS("platform:imx-ssi"); | ||
diff --git a/sound/soc/fsl/imx-ssi.h b/sound/soc/fsl/imx-ssi.h new file mode 100644 index 000000000000..5744e86ca878 --- /dev/null +++ b/sound/soc/fsl/imx-ssi.h | |||
@@ -0,0 +1,216 @@ | |||
1 | /* | ||
2 | * This program is free software; you can redistribute it and/or modify | ||
3 | * it under the terms of the GNU General Public License version 2 as | ||
4 | * published by the Free Software Foundation. | ||
5 | */ | ||
6 | |||
7 | #ifndef _IMX_SSI_H | ||
8 | #define _IMX_SSI_H | ||
9 | |||
10 | #define SSI_STX0 0x00 | ||
11 | #define SSI_STX1 0x04 | ||
12 | #define SSI_SRX0 0x08 | ||
13 | #define SSI_SRX1 0x0c | ||
14 | |||
15 | #define SSI_SCR 0x10 | ||
16 | #define SSI_SCR_CLK_IST (1 << 9) | ||
17 | #define SSI_SCR_CLK_IST_SHIFT 9 | ||
18 | #define SSI_SCR_TCH_EN (1 << 8) | ||
19 | #define SSI_SCR_SYS_CLK_EN (1 << 7) | ||
20 | #define SSI_SCR_I2S_MODE_NORM (0 << 5) | ||
21 | #define SSI_SCR_I2S_MODE_MSTR (1 << 5) | ||
22 | #define SSI_SCR_I2S_MODE_SLAVE (2 << 5) | ||
23 | #define SSI_I2S_MODE_MASK (3 << 5) | ||
24 | #define SSI_SCR_SYN (1 << 4) | ||
25 | #define SSI_SCR_NET (1 << 3) | ||
26 | #define SSI_SCR_RE (1 << 2) | ||
27 | #define SSI_SCR_TE (1 << 1) | ||
28 | #define SSI_SCR_SSIEN (1 << 0) | ||
29 | |||
30 | #define SSI_SISR 0x14 | ||
31 | #define SSI_SISR_MASK ((1 << 19) - 1) | ||
32 | #define SSI_SISR_CMDAU (1 << 18) | ||
33 | #define SSI_SISR_CMDDU (1 << 17) | ||
34 | #define SSI_SISR_RXT (1 << 16) | ||
35 | #define SSI_SISR_RDR1 (1 << 15) | ||
36 | #define SSI_SISR_RDR0 (1 << 14) | ||
37 | #define SSI_SISR_TDE1 (1 << 13) | ||
38 | #define SSI_SISR_TDE0 (1 << 12) | ||
39 | #define SSI_SISR_ROE1 (1 << 11) | ||
40 | #define SSI_SISR_ROE0 (1 << 10) | ||
41 | #define SSI_SISR_TUE1 (1 << 9) | ||
42 | #define SSI_SISR_TUE0 (1 << 8) | ||
43 | #define SSI_SISR_TFS (1 << 7) | ||
44 | #define SSI_SISR_RFS (1 << 6) | ||
45 | #define SSI_SISR_TLS (1 << 5) | ||
46 | #define SSI_SISR_RLS (1 << 4) | ||
47 | #define SSI_SISR_RFF1 (1 << 3) | ||
48 | #define SSI_SISR_RFF0 (1 << 2) | ||
49 | #define SSI_SISR_TFE1 (1 << 1) | ||
50 | #define SSI_SISR_TFE0 (1 << 0) | ||
51 | |||
52 | #define SSI_SIER 0x18 | ||
53 | #define SSI_SIER_RDMAE (1 << 22) | ||
54 | #define SSI_SIER_RIE (1 << 21) | ||
55 | #define SSI_SIER_TDMAE (1 << 20) | ||
56 | #define SSI_SIER_TIE (1 << 19) | ||
57 | #define SSI_SIER_CMDAU_EN (1 << 18) | ||
58 | #define SSI_SIER_CMDDU_EN (1 << 17) | ||
59 | #define SSI_SIER_RXT_EN (1 << 16) | ||
60 | #define SSI_SIER_RDR1_EN (1 << 15) | ||
61 | #define SSI_SIER_RDR0_EN (1 << 14) | ||
62 | #define SSI_SIER_TDE1_EN (1 << 13) | ||
63 | #define SSI_SIER_TDE0_EN (1 << 12) | ||
64 | #define SSI_SIER_ROE1_EN (1 << 11) | ||
65 | #define SSI_SIER_ROE0_EN (1 << 10) | ||
66 | #define SSI_SIER_TUE1_EN (1 << 9) | ||
67 | #define SSI_SIER_TUE0_EN (1 << 8) | ||
68 | #define SSI_SIER_TFS_EN (1 << 7) | ||
69 | #define SSI_SIER_RFS_EN (1 << 6) | ||
70 | #define SSI_SIER_TLS_EN (1 << 5) | ||
71 | #define SSI_SIER_RLS_EN (1 << 4) | ||
72 | #define SSI_SIER_RFF1_EN (1 << 3) | ||
73 | #define SSI_SIER_RFF0_EN (1 << 2) | ||
74 | #define SSI_SIER_TFE1_EN (1 << 1) | ||
75 | #define SSI_SIER_TFE0_EN (1 << 0) | ||
76 | |||
77 | #define SSI_STCR 0x1c | ||
78 | #define SSI_STCR_TXBIT0 (1 << 9) | ||
79 | #define SSI_STCR_TFEN1 (1 << 8) | ||
80 | #define SSI_STCR_TFEN0 (1 << 7) | ||
81 | #define SSI_FIFO_ENABLE_0_SHIFT 7 | ||
82 | #define SSI_STCR_TFDIR (1 << 6) | ||
83 | #define SSI_STCR_TXDIR (1 << 5) | ||
84 | #define SSI_STCR_TSHFD (1 << 4) | ||
85 | #define SSI_STCR_TSCKP (1 << 3) | ||
86 | #define SSI_STCR_TFSI (1 << 2) | ||
87 | #define SSI_STCR_TFSL (1 << 1) | ||
88 | #define SSI_STCR_TEFS (1 << 0) | ||
89 | |||
90 | #define SSI_SRCR 0x20 | ||
91 | #define SSI_SRCR_RXBIT0 (1 << 9) | ||
92 | #define SSI_SRCR_RFEN1 (1 << 8) | ||
93 | #define SSI_SRCR_RFEN0 (1 << 7) | ||
94 | #define SSI_FIFO_ENABLE_0_SHIFT 7 | ||
95 | #define SSI_SRCR_RFDIR (1 << 6) | ||
96 | #define SSI_SRCR_RXDIR (1 << 5) | ||
97 | #define SSI_SRCR_RSHFD (1 << 4) | ||
98 | #define SSI_SRCR_RSCKP (1 << 3) | ||
99 | #define SSI_SRCR_RFSI (1 << 2) | ||
100 | #define SSI_SRCR_RFSL (1 << 1) | ||
101 | #define SSI_SRCR_REFS (1 << 0) | ||
102 | |||
103 | #define SSI_SRCCR 0x28 | ||
104 | #define SSI_SRCCR_DIV2 (1 << 18) | ||
105 | #define SSI_SRCCR_PSR (1 << 17) | ||
106 | #define SSI_SRCCR_WL(x) ((((x) - 2) >> 1) << 13) | ||
107 | #define SSI_SRCCR_DC(x) (((x) & 0x1f) << 8) | ||
108 | #define SSI_SRCCR_PM(x) (((x) & 0xff) << 0) | ||
109 | #define SSI_SRCCR_WL_MASK (0xf << 13) | ||
110 | #define SSI_SRCCR_DC_MASK (0x1f << 8) | ||
111 | #define SSI_SRCCR_PM_MASK (0xff << 0) | ||
112 | |||
113 | #define SSI_STCCR 0x24 | ||
114 | #define SSI_STCCR_DIV2 (1 << 18) | ||
115 | #define SSI_STCCR_PSR (1 << 17) | ||
116 | #define SSI_STCCR_WL(x) ((((x) - 2) >> 1) << 13) | ||
117 | #define SSI_STCCR_DC(x) (((x) & 0x1f) << 8) | ||
118 | #define SSI_STCCR_PM(x) (((x) & 0xff) << 0) | ||
119 | #define SSI_STCCR_WL_MASK (0xf << 13) | ||
120 | #define SSI_STCCR_DC_MASK (0x1f << 8) | ||
121 | #define SSI_STCCR_PM_MASK (0xff << 0) | ||
122 | |||
123 | #define SSI_SFCSR 0x2c | ||
124 | #define SSI_SFCSR_RFCNT1(x) (((x) & 0xf) << 28) | ||
125 | #define SSI_RX_FIFO_1_COUNT_SHIFT 28 | ||
126 | #define SSI_SFCSR_TFCNT1(x) (((x) & 0xf) << 24) | ||
127 | #define SSI_TX_FIFO_1_COUNT_SHIFT 24 | ||
128 | #define SSI_SFCSR_RFWM1(x) (((x) & 0xf) << 20) | ||
129 | #define SSI_SFCSR_TFWM1(x) (((x) & 0xf) << 16) | ||
130 | #define SSI_SFCSR_RFCNT0(x) (((x) & 0xf) << 12) | ||
131 | #define SSI_RX_FIFO_0_COUNT_SHIFT 12 | ||
132 | #define SSI_SFCSR_TFCNT0(x) (((x) & 0xf) << 8) | ||
133 | #define SSI_TX_FIFO_0_COUNT_SHIFT 8 | ||
134 | #define SSI_SFCSR_RFWM0(x) (((x) & 0xf) << 4) | ||
135 | #define SSI_SFCSR_TFWM0(x) (((x) & 0xf) << 0) | ||
136 | #define SSI_SFCSR_RFWM0_MASK (0xf << 4) | ||
137 | #define SSI_SFCSR_TFWM0_MASK (0xf << 0) | ||
138 | |||
139 | #define SSI_STR 0x30 | ||
140 | #define SSI_STR_TEST (1 << 15) | ||
141 | #define SSI_STR_RCK2TCK (1 << 14) | ||
142 | #define SSI_STR_RFS2TFS (1 << 13) | ||
143 | #define SSI_STR_RXSTATE(x) (((x) & 0xf) << 8) | ||
144 | #define SSI_STR_TXD2RXD (1 << 7) | ||
145 | #define SSI_STR_TCK2RCK (1 << 6) | ||
146 | #define SSI_STR_TFS2RFS (1 << 5) | ||
147 | #define SSI_STR_TXSTATE(x) (((x) & 0xf) << 0) | ||
148 | |||
149 | #define SSI_SOR 0x34 | ||
150 | #define SSI_SOR_CLKOFF (1 << 6) | ||
151 | #define SSI_SOR_RX_CLR (1 << 5) | ||
152 | #define SSI_SOR_TX_CLR (1 << 4) | ||
153 | #define SSI_SOR_INIT (1 << 3) | ||
154 | #define SSI_SOR_WAIT(x) (((x) & 0x3) << 1) | ||
155 | #define SSI_SOR_WAIT_MASK (0x3 << 1) | ||
156 | #define SSI_SOR_SYNRST (1 << 0) | ||
157 | |||
158 | #define SSI_SACNT 0x38 | ||
159 | #define SSI_SACNT_FRDIV(x) (((x) & 0x3f) << 5) | ||
160 | #define SSI_SACNT_WR (1 << 4) | ||
161 | #define SSI_SACNT_RD (1 << 3) | ||
162 | #define SSI_SACNT_TIF (1 << 2) | ||
163 | #define SSI_SACNT_FV (1 << 1) | ||
164 | #define SSI_SACNT_AC97EN (1 << 0) | ||
165 | |||
166 | #define SSI_SACADD 0x3c | ||
167 | #define SSI_SACDAT 0x40 | ||
168 | #define SSI_SATAG 0x44 | ||
169 | #define SSI_STMSK 0x48 | ||
170 | #define SSI_SRMSK 0x4c | ||
171 | #define SSI_SACCST 0x50 | ||
172 | #define SSI_SACCEN 0x54 | ||
173 | #define SSI_SACCDIS 0x58 | ||
174 | |||
175 | /* SSI clock sources */ | ||
176 | #define IMX_SSP_SYS_CLK 0 | ||
177 | |||
178 | /* SSI audio dividers */ | ||
179 | #define IMX_SSI_TX_DIV_2 0 | ||
180 | #define IMX_SSI_TX_DIV_PSR 1 | ||
181 | #define IMX_SSI_TX_DIV_PM 2 | ||
182 | #define IMX_SSI_RX_DIV_2 3 | ||
183 | #define IMX_SSI_RX_DIV_PSR 4 | ||
184 | #define IMX_SSI_RX_DIV_PM 5 | ||
185 | |||
186 | #define DRV_NAME "imx-ssi" | ||
187 | |||
188 | #include <linux/dmaengine.h> | ||
189 | #include <mach/dma.h> | ||
190 | #include "imx-pcm.h" | ||
191 | |||
192 | struct imx_ssi { | ||
193 | struct platform_device *ac97_dev; | ||
194 | |||
195 | struct snd_soc_dai *imx_ac97; | ||
196 | struct clk *clk; | ||
197 | void __iomem *base; | ||
198 | int irq; | ||
199 | int fiq_enable; | ||
200 | unsigned int offset; | ||
201 | |||
202 | unsigned int flags; | ||
203 | |||
204 | void (*ac97_reset) (struct snd_ac97 *ac97); | ||
205 | void (*ac97_warm_reset)(struct snd_ac97 *ac97); | ||
206 | |||
207 | struct imx_pcm_dma_params dma_params_rx; | ||
208 | struct imx_pcm_dma_params dma_params_tx; | ||
209 | |||
210 | int enabled; | ||
211 | |||
212 | struct platform_device *soc_platform_pdev; | ||
213 | struct platform_device *soc_platform_pdev_fiq; | ||
214 | }; | ||
215 | |||
216 | #endif /* _IMX_SSI_H */ | ||
diff --git a/sound/soc/fsl/mpc8610_hpcd.c b/sound/soc/fsl/mpc8610_hpcd.c index 3fea5a15ffe8..60bcba1bc30e 100644 --- a/sound/soc/fsl/mpc8610_hpcd.c +++ b/sound/soc/fsl/mpc8610_hpcd.c | |||
@@ -14,18 +14,16 @@ | |||
14 | #include <linux/interrupt.h> | 14 | #include <linux/interrupt.h> |
15 | #include <linux/of_device.h> | 15 | #include <linux/of_device.h> |
16 | #include <linux/slab.h> | 16 | #include <linux/slab.h> |
17 | #include <linux/of_i2c.h> | ||
18 | #include <sound/soc.h> | 17 | #include <sound/soc.h> |
19 | #include <asm/fsl_guts.h> | 18 | #include <asm/fsl_guts.h> |
20 | 19 | ||
21 | #include "fsl_dma.h" | 20 | #include "fsl_dma.h" |
22 | #include "fsl_ssi.h" | 21 | #include "fsl_ssi.h" |
22 | #include "fsl_utils.h" | ||
23 | 23 | ||
24 | /* There's only one global utilities register */ | 24 | /* There's only one global utilities register */ |
25 | static phys_addr_t guts_phys; | 25 | static phys_addr_t guts_phys; |
26 | 26 | ||
27 | #define DAI_NAME_SIZE 32 | ||
28 | |||
29 | /** | 27 | /** |
30 | * mpc8610_hpcd_data: machine-specific ASoC device data | 28 | * mpc8610_hpcd_data: machine-specific ASoC device data |
31 | * | 29 | * |
@@ -43,7 +41,6 @@ struct mpc8610_hpcd_data { | |||
43 | unsigned int dma_id[2]; /* 0 = DMA1, 1 = DMA2, etc */ | 41 | unsigned int dma_id[2]; /* 0 = DMA1, 1 = DMA2, etc */ |
44 | unsigned int dma_channel_id[2]; /* 0 = ch 0, 1 = ch 1, etc*/ | 42 | unsigned int dma_channel_id[2]; /* 0 = ch 0, 1 = ch 1, etc*/ |
45 | char codec_dai_name[DAI_NAME_SIZE]; | 43 | char codec_dai_name[DAI_NAME_SIZE]; |
46 | char codec_name[DAI_NAME_SIZE]; | ||
47 | char platform_name[2][DAI_NAME_SIZE]; /* One for each DMA channel */ | 44 | char platform_name[2][DAI_NAME_SIZE]; /* One for each DMA channel */ |
48 | }; | 45 | }; |
49 | 46 | ||
@@ -181,141 +178,6 @@ static struct snd_soc_ops mpc8610_hpcd_ops = { | |||
181 | }; | 178 | }; |
182 | 179 | ||
183 | /** | 180 | /** |
184 | * get_node_by_phandle_name - get a node by its phandle name | ||
185 | * | ||
186 | * This function takes a node, the name of a property in that node, and a | ||
187 | * compatible string. Assuming the property is a phandle to another node, | ||
188 | * it returns that node, (optionally) if that node is compatible. | ||
189 | * | ||
190 | * If the property is not a phandle, or the node it points to is not compatible | ||
191 | * with the specific string, then NULL is returned. | ||
192 | */ | ||
193 | static struct device_node *get_node_by_phandle_name(struct device_node *np, | ||
194 | const char *name, | ||
195 | const char *compatible) | ||
196 | { | ||
197 | const phandle *ph; | ||
198 | int len; | ||
199 | |||
200 | ph = of_get_property(np, name, &len); | ||
201 | if (!ph || (len != sizeof(phandle))) | ||
202 | return NULL; | ||
203 | |||
204 | np = of_find_node_by_phandle(*ph); | ||
205 | if (!np) | ||
206 | return NULL; | ||
207 | |||
208 | if (compatible && !of_device_is_compatible(np, compatible)) { | ||
209 | of_node_put(np); | ||
210 | return NULL; | ||
211 | } | ||
212 | |||
213 | return np; | ||
214 | } | ||
215 | |||
216 | /** | ||
217 | * get_parent_cell_index -- return the cell-index of the parent of a node | ||
218 | * | ||
219 | * Return the value of the cell-index property of the parent of the given | ||
220 | * node. This is used for DMA channel nodes that need to know the DMA ID | ||
221 | * of the controller they are on. | ||
222 | */ | ||
223 | static int get_parent_cell_index(struct device_node *np) | ||
224 | { | ||
225 | struct device_node *parent = of_get_parent(np); | ||
226 | const u32 *iprop; | ||
227 | |||
228 | if (!parent) | ||
229 | return -1; | ||
230 | |||
231 | iprop = of_get_property(parent, "cell-index", NULL); | ||
232 | of_node_put(parent); | ||
233 | |||
234 | if (!iprop) | ||
235 | return -1; | ||
236 | |||
237 | return be32_to_cpup(iprop); | ||
238 | } | ||
239 | |||
240 | /** | ||
241 | * codec_node_dev_name - determine the dev_name for a codec node | ||
242 | * | ||
243 | * This function determines the dev_name for an I2C node. This is the name | ||
244 | * that would be returned by dev_name() if this device_node were part of a | ||
245 | * 'struct device' It's ugly and hackish, but it works. | ||
246 | * | ||
247 | * The dev_name for such devices include the bus number and I2C address. For | ||
248 | * example, "cs4270.0-004f". | ||
249 | */ | ||
250 | static int codec_node_dev_name(struct device_node *np, char *buf, size_t len) | ||
251 | { | ||
252 | const u32 *iprop; | ||
253 | int addr; | ||
254 | char temp[DAI_NAME_SIZE]; | ||
255 | struct i2c_client *i2c; | ||
256 | |||
257 | of_modalias_node(np, temp, DAI_NAME_SIZE); | ||
258 | |||
259 | iprop = of_get_property(np, "reg", NULL); | ||
260 | if (!iprop) | ||
261 | return -EINVAL; | ||
262 | |||
263 | addr = be32_to_cpup(iprop); | ||
264 | |||
265 | /* We need the adapter number */ | ||
266 | i2c = of_find_i2c_device_by_node(np); | ||
267 | if (!i2c) | ||
268 | return -ENODEV; | ||
269 | |||
270 | snprintf(buf, len, "%s.%u-%04x", temp, i2c->adapter->nr, addr); | ||
271 | |||
272 | return 0; | ||
273 | } | ||
274 | |||
275 | static int get_dma_channel(struct device_node *ssi_np, | ||
276 | const char *name, | ||
277 | struct snd_soc_dai_link *dai, | ||
278 | unsigned int *dma_channel_id, | ||
279 | unsigned int *dma_id) | ||
280 | { | ||
281 | struct resource res; | ||
282 | struct device_node *dma_channel_np; | ||
283 | const u32 *iprop; | ||
284 | int ret; | ||
285 | |||
286 | dma_channel_np = get_node_by_phandle_name(ssi_np, name, | ||
287 | "fsl,ssi-dma-channel"); | ||
288 | if (!dma_channel_np) | ||
289 | return -EINVAL; | ||
290 | |||
291 | /* Determine the dev_name for the device_node. This code mimics the | ||
292 | * behavior of of_device_make_bus_id(). We need this because ASoC uses | ||
293 | * the dev_name() of the device to match the platform (DMA) device with | ||
294 | * the CPU (SSI) device. It's all ugly and hackish, but it works (for | ||
295 | * now). | ||
296 | * | ||
297 | * dai->platform name should already point to an allocated buffer. | ||
298 | */ | ||
299 | ret = of_address_to_resource(dma_channel_np, 0, &res); | ||
300 | if (ret) | ||
301 | return ret; | ||
302 | snprintf((char *)dai->platform_name, DAI_NAME_SIZE, "%llx.%s", | ||
303 | (unsigned long long) res.start, dma_channel_np->name); | ||
304 | |||
305 | iprop = of_get_property(dma_channel_np, "cell-index", NULL); | ||
306 | if (!iprop) { | ||
307 | of_node_put(dma_channel_np); | ||
308 | return -EINVAL; | ||
309 | } | ||
310 | |||
311 | *dma_channel_id = be32_to_cpup(iprop); | ||
312 | *dma_id = get_parent_cell_index(dma_channel_np); | ||
313 | of_node_put(dma_channel_np); | ||
314 | |||
315 | return 0; | ||
316 | } | ||
317 | |||
318 | /** | ||
319 | * mpc8610_hpcd_probe: platform probe function for the machine driver | 181 | * mpc8610_hpcd_probe: platform probe function for the machine driver |
320 | * | 182 | * |
321 | * Although this is a machine driver, the SSI node is the "master" node with | 183 | * Although this is a machine driver, the SSI node is the "master" node with |
@@ -352,16 +214,8 @@ static int mpc8610_hpcd_probe(struct platform_device *pdev) | |||
352 | machine_data->dai[0].cpu_dai_name = dev_name(&ssi_pdev->dev); | 214 | machine_data->dai[0].cpu_dai_name = dev_name(&ssi_pdev->dev); |
353 | machine_data->dai[0].ops = &mpc8610_hpcd_ops; | 215 | machine_data->dai[0].ops = &mpc8610_hpcd_ops; |
354 | 216 | ||
355 | /* Determine the codec name, it will be used as the codec DAI name */ | 217 | /* ASoC core can match codec with device node */ |
356 | ret = codec_node_dev_name(codec_np, machine_data->codec_name, | 218 | machine_data->dai[0].codec_of_node = codec_np; |
357 | DAI_NAME_SIZE); | ||
358 | if (ret) { | ||
359 | dev_err(&pdev->dev, "invalid codec node %s\n", | ||
360 | codec_np->full_name); | ||
361 | ret = -EINVAL; | ||
362 | goto error; | ||
363 | } | ||
364 | machine_data->dai[0].codec_name = machine_data->codec_name; | ||
365 | 219 | ||
366 | /* The DAI name from the codec (snd_soc_dai_driver.name) */ | 220 | /* The DAI name from the codec (snd_soc_dai_driver.name) */ |
367 | machine_data->dai[0].codec_dai_name = "cs4270-hifi"; | 221 | machine_data->dai[0].codec_dai_name = "cs4270-hifi"; |
@@ -458,9 +312,10 @@ static int mpc8610_hpcd_probe(struct platform_device *pdev) | |||
458 | 312 | ||
459 | /* Find the playback DMA channel to use. */ | 313 | /* Find the playback DMA channel to use. */ |
460 | machine_data->dai[0].platform_name = machine_data->platform_name[0]; | 314 | machine_data->dai[0].platform_name = machine_data->platform_name[0]; |
461 | ret = get_dma_channel(np, "fsl,playback-dma", &machine_data->dai[0], | 315 | ret = fsl_asoc_get_dma_channel(np, "fsl,playback-dma", |
462 | &machine_data->dma_channel_id[0], | 316 | &machine_data->dai[0], |
463 | &machine_data->dma_id[0]); | 317 | &machine_data->dma_channel_id[0], |
318 | &machine_data->dma_id[0]); | ||
464 | if (ret) { | 319 | if (ret) { |
465 | dev_err(&pdev->dev, "missing/invalid playback DMA phandle\n"); | 320 | dev_err(&pdev->dev, "missing/invalid playback DMA phandle\n"); |
466 | goto error; | 321 | goto error; |
@@ -468,9 +323,10 @@ static int mpc8610_hpcd_probe(struct platform_device *pdev) | |||
468 | 323 | ||
469 | /* Find the capture DMA channel to use. */ | 324 | /* Find the capture DMA channel to use. */ |
470 | machine_data->dai[1].platform_name = machine_data->platform_name[1]; | 325 | machine_data->dai[1].platform_name = machine_data->platform_name[1]; |
471 | ret = get_dma_channel(np, "fsl,capture-dma", &machine_data->dai[1], | 326 | ret = fsl_asoc_get_dma_channel(np, "fsl,capture-dma", |
472 | &machine_data->dma_channel_id[1], | 327 | &machine_data->dai[1], |
473 | &machine_data->dma_id[1]); | 328 | &machine_data->dma_channel_id[1], |
329 | &machine_data->dma_id[1]); | ||
474 | if (ret) { | 330 | if (ret) { |
475 | dev_err(&pdev->dev, "missing/invalid capture DMA phandle\n"); | 331 | dev_err(&pdev->dev, "missing/invalid capture DMA phandle\n"); |
476 | goto error; | 332 | goto error; |
diff --git a/sound/soc/fsl/mx27vis-aic32x4.c b/sound/soc/fsl/mx27vis-aic32x4.c new file mode 100644 index 000000000000..f6d04ad4bb39 --- /dev/null +++ b/sound/soc/fsl/mx27vis-aic32x4.c | |||
@@ -0,0 +1,245 @@ | |||
1 | /* | ||
2 | * mx27vis-aic32x4.c | ||
3 | * | ||
4 | * Copyright 2011 Vista Silicon S.L. | ||
5 | * | ||
6 | * Author: Javier Martin <javier.martin@vista-silicon.com> | ||
7 | * | ||
8 | * This program is free software; you can redistribute it and/or modify it | ||
9 | * under the terms of the GNU General Public License as published by the | ||
10 | * Free Software Foundation; either version 2 of the License, or (at your | ||
11 | * option) any later version. | ||
12 | * | ||
13 | * This program is distributed in the hope that it will be useful, | ||
14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | ||
15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | ||
16 | * GNU General Public License for more details. | ||
17 | * | ||
18 | * You should have received a copy of the GNU General Public License | ||
19 | * along with this program; if not, write to the Free Software | ||
20 | * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, | ||
21 | * MA 02110-1301, USA. | ||
22 | */ | ||
23 | |||
24 | #include <linux/module.h> | ||
25 | #include <linux/moduleparam.h> | ||
26 | #include <linux/device.h> | ||
27 | #include <linux/i2c.h> | ||
28 | #include <linux/gpio.h> | ||
29 | #include <sound/core.h> | ||
30 | #include <sound/pcm.h> | ||
31 | #include <sound/soc.h> | ||
32 | #include <sound/soc-dapm.h> | ||
33 | #include <sound/tlv.h> | ||
34 | #include <asm/mach-types.h> | ||
35 | #include <mach/iomux-mx27.h> | ||
36 | |||
37 | #include "../codecs/tlv320aic32x4.h" | ||
38 | #include "imx-ssi.h" | ||
39 | #include "imx-audmux.h" | ||
40 | |||
41 | #define MX27VIS_AMP_GAIN 0 | ||
42 | #define MX27VIS_AMP_MUTE 1 | ||
43 | |||
44 | #define MX27VIS_PIN_G0 (GPIO_PORTF + 9) | ||
45 | #define MX27VIS_PIN_G1 (GPIO_PORTF + 8) | ||
46 | #define MX27VIS_PIN_SDL (GPIO_PORTE + 5) | ||
47 | #define MX27VIS_PIN_SDR (GPIO_PORTF + 7) | ||
48 | |||
49 | static int mx27vis_amp_gain; | ||
50 | static int mx27vis_amp_mute; | ||
51 | |||
52 | static const int mx27vis_amp_pins[] = { | ||
53 | MX27VIS_PIN_G0 | GPIO_GPIO | GPIO_OUT, | ||
54 | MX27VIS_PIN_G1 | GPIO_GPIO | GPIO_OUT, | ||
55 | MX27VIS_PIN_SDL | GPIO_GPIO | GPIO_OUT, | ||
56 | MX27VIS_PIN_SDR | GPIO_GPIO | GPIO_OUT, | ||
57 | }; | ||
58 | |||
59 | static int mx27vis_aic32x4_hw_params(struct snd_pcm_substream *substream, | ||
60 | struct snd_pcm_hw_params *params) | ||
61 | { | ||
62 | struct snd_soc_pcm_runtime *rtd = substream->private_data; | ||
63 | struct snd_soc_dai *codec_dai = rtd->codec_dai; | ||
64 | struct snd_soc_dai *cpu_dai = rtd->cpu_dai; | ||
65 | int ret; | ||
66 | u32 dai_format; | ||
67 | |||
68 | dai_format = SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_NB_NF | | ||
69 | SND_SOC_DAIFMT_CBM_CFM; | ||
70 | |||
71 | /* set codec DAI configuration */ | ||
72 | snd_soc_dai_set_fmt(codec_dai, dai_format); | ||
73 | |||
74 | /* set cpu DAI configuration */ | ||
75 | snd_soc_dai_set_fmt(cpu_dai, dai_format); | ||
76 | |||
77 | ret = snd_soc_dai_set_sysclk(codec_dai, 0, | ||
78 | 25000000, SND_SOC_CLOCK_OUT); | ||
79 | if (ret) { | ||
80 | pr_err("%s: failed setting codec sysclk\n", __func__); | ||
81 | return ret; | ||
82 | } | ||
83 | |||
84 | ret = snd_soc_dai_set_sysclk(cpu_dai, IMX_SSP_SYS_CLK, 0, | ||
85 | SND_SOC_CLOCK_IN); | ||
86 | if (ret) { | ||
87 | pr_err("can't set CPU system clock IMX_SSP_SYS_CLK\n"); | ||
88 | return ret; | ||
89 | } | ||
90 | |||
91 | return 0; | ||
92 | } | ||
93 | |||
94 | static struct snd_soc_ops mx27vis_aic32x4_snd_ops = { | ||
95 | .hw_params = mx27vis_aic32x4_hw_params, | ||
96 | }; | ||
97 | |||
98 | static int mx27vis_amp_set(struct snd_kcontrol *kcontrol, | ||
99 | struct snd_ctl_elem_value *ucontrol) | ||
100 | { | ||
101 | struct soc_mixer_control *mc = | ||
102 | (struct soc_mixer_control *)kcontrol->private_value; | ||
103 | int value = ucontrol->value.integer.value[0]; | ||
104 | unsigned int reg = mc->reg; | ||
105 | int max = mc->max; | ||
106 | |||
107 | if (value > max) | ||
108 | return -EINVAL; | ||
109 | |||
110 | switch (reg) { | ||
111 | case MX27VIS_AMP_GAIN: | ||
112 | gpio_set_value(MX27VIS_PIN_G0, value & 1); | ||
113 | gpio_set_value(MX27VIS_PIN_G1, value >> 1); | ||
114 | mx27vis_amp_gain = value; | ||
115 | break; | ||
116 | case MX27VIS_AMP_MUTE: | ||
117 | gpio_set_value(MX27VIS_PIN_SDL, value & 1); | ||
118 | gpio_set_value(MX27VIS_PIN_SDR, value >> 1); | ||
119 | mx27vis_amp_mute = value; | ||
120 | break; | ||
121 | } | ||
122 | return 0; | ||
123 | } | ||
124 | |||
125 | static int mx27vis_amp_get(struct snd_kcontrol *kcontrol, | ||
126 | struct snd_ctl_elem_value *ucontrol) | ||
127 | { | ||
128 | struct soc_mixer_control *mc = | ||
129 | (struct soc_mixer_control *)kcontrol->private_value; | ||
130 | unsigned int reg = mc->reg; | ||
131 | |||
132 | switch (reg) { | ||
133 | case MX27VIS_AMP_GAIN: | ||
134 | ucontrol->value.integer.value[0] = mx27vis_amp_gain; | ||
135 | break; | ||
136 | case MX27VIS_AMP_MUTE: | ||
137 | ucontrol->value.integer.value[0] = mx27vis_amp_mute; | ||
138 | break; | ||
139 | } | ||
140 | return 0; | ||
141 | } | ||
142 | |||
143 | /* From 6dB to 24dB in steps of 6dB */ | ||
144 | static const DECLARE_TLV_DB_SCALE(mx27vis_amp_tlv, 600, 600, 0); | ||
145 | |||
146 | static const struct snd_kcontrol_new mx27vis_aic32x4_controls[] = { | ||
147 | SOC_DAPM_PIN_SWITCH("External Mic"), | ||
148 | SOC_SINGLE_EXT_TLV("LO Ext Boost", MX27VIS_AMP_GAIN, 0, 3, 0, | ||
149 | mx27vis_amp_get, mx27vis_amp_set, mx27vis_amp_tlv), | ||
150 | SOC_DOUBLE_EXT("LO Ext Mute Switch", MX27VIS_AMP_MUTE, 0, 1, 1, 0, | ||
151 | mx27vis_amp_get, mx27vis_amp_set), | ||
152 | }; | ||
153 | |||
154 | static const struct snd_soc_dapm_widget aic32x4_dapm_widgets[] = { | ||
155 | SND_SOC_DAPM_MIC("External Mic", NULL), | ||
156 | }; | ||
157 | |||
158 | static const struct snd_soc_dapm_route aic32x4_dapm_routes[] = { | ||
159 | {"Mic Bias", NULL, "External Mic"}, | ||
160 | {"IN1_R", NULL, "Mic Bias"}, | ||
161 | {"IN2_R", NULL, "Mic Bias"}, | ||
162 | {"IN3_R", NULL, "Mic Bias"}, | ||
163 | {"IN1_L", NULL, "Mic Bias"}, | ||
164 | {"IN2_L", NULL, "Mic Bias"}, | ||
165 | {"IN3_L", NULL, "Mic Bias"}, | ||
166 | }; | ||
167 | |||
168 | static struct snd_soc_dai_link mx27vis_aic32x4_dai = { | ||
169 | .name = "tlv320aic32x4", | ||
170 | .stream_name = "TLV320AIC32X4", | ||
171 | .codec_dai_name = "tlv320aic32x4-hifi", | ||
172 | .platform_name = "imx-pcm-audio.0", | ||
173 | .codec_name = "tlv320aic32x4.0-0018", | ||
174 | .cpu_dai_name = "imx-ssi.0", | ||
175 | .ops = &mx27vis_aic32x4_snd_ops, | ||
176 | }; | ||
177 | |||
178 | static struct snd_soc_card mx27vis_aic32x4 = { | ||
179 | .name = "visstrim_m10-audio", | ||
180 | .owner = THIS_MODULE, | ||
181 | .dai_link = &mx27vis_aic32x4_dai, | ||
182 | .num_links = 1, | ||
183 | .controls = mx27vis_aic32x4_controls, | ||
184 | .num_controls = ARRAY_SIZE(mx27vis_aic32x4_controls), | ||
185 | .dapm_widgets = aic32x4_dapm_widgets, | ||
186 | .num_dapm_widgets = ARRAY_SIZE(aic32x4_dapm_widgets), | ||
187 | .dapm_routes = aic32x4_dapm_routes, | ||
188 | .num_dapm_routes = ARRAY_SIZE(aic32x4_dapm_routes), | ||
189 | }; | ||
190 | |||
191 | static int __devinit mx27vis_aic32x4_probe(struct platform_device *pdev) | ||
192 | { | ||
193 | int ret; | ||
194 | |||
195 | mx27vis_aic32x4.dev = &pdev->dev; | ||
196 | ret = snd_soc_register_card(&mx27vis_aic32x4); | ||
197 | if (ret) { | ||
198 | dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", | ||
199 | ret); | ||
200 | return ret; | ||
201 | } | ||
202 | |||
203 | /* Connect SSI0 as clock slave to SSI1 external pins */ | ||
204 | imx_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0, | ||
205 | IMX_AUDMUX_V1_PCR_SYN | | ||
206 | IMX_AUDMUX_V1_PCR_TFSDIR | | ||
207 | IMX_AUDMUX_V1_PCR_TCLKDIR | | ||
208 | IMX_AUDMUX_V1_PCR_TFCSEL(MX27_AUDMUX_PPCR1_SSI_PINS_1) | | ||
209 | IMX_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_PPCR1_SSI_PINS_1) | ||
210 | ); | ||
211 | imx_audmux_v1_configure_port(MX27_AUDMUX_PPCR1_SSI_PINS_1, | ||
212 | IMX_AUDMUX_V1_PCR_SYN | | ||
213 | IMX_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_HPCR1_SSI0) | ||
214 | ); | ||
215 | |||
216 | ret = mxc_gpio_setup_multiple_pins(mx27vis_amp_pins, | ||
217 | ARRAY_SIZE(mx27vis_amp_pins), "MX27VIS_AMP"); | ||
218 | if (ret) | ||
219 | printk(KERN_ERR "ASoC: unable to setup gpios\n"); | ||
220 | |||
221 | return ret; | ||
222 | } | ||
223 | |||
224 | static int __devexit mx27vis_aic32x4_remove(struct platform_device *pdev) | ||
225 | { | ||
226 | snd_soc_unregister_card(&mx27vis_aic32x4); | ||
227 | |||
228 | return 0; | ||
229 | } | ||
230 | |||
231 | static struct platform_driver mx27vis_aic32x4_audio_driver = { | ||
232 | .driver = { | ||
233 | .name = "mx27vis", | ||
234 | .owner = THIS_MODULE, | ||
235 | }, | ||
236 | .probe = mx27vis_aic32x4_probe, | ||
237 | .remove = __devexit_p(mx27vis_aic32x4_remove), | ||
238 | }; | ||
239 | |||
240 | module_platform_driver(mx27vis_aic32x4_audio_driver); | ||
241 | |||
242 | MODULE_AUTHOR("Javier Martin <javier.martin@vista-silicon.com>"); | ||
243 | MODULE_DESCRIPTION("ALSA SoC AIC32X4 mx27 visstrim"); | ||
244 | MODULE_LICENSE("GPL"); | ||
245 | MODULE_ALIAS("platform:mx27vis"); | ||
diff --git a/sound/soc/fsl/p1022_ds.c b/sound/soc/fsl/p1022_ds.c index 982a1c944983..50adf4032bcc 100644 --- a/sound/soc/fsl/p1022_ds.c +++ b/sound/soc/fsl/p1022_ds.c | |||
@@ -14,12 +14,12 @@ | |||
14 | #include <linux/interrupt.h> | 14 | #include <linux/interrupt.h> |
15 | #include <linux/of_device.h> | 15 | #include <linux/of_device.h> |
16 | #include <linux/slab.h> | 16 | #include <linux/slab.h> |
17 | #include <linux/of_i2c.h> | ||
18 | #include <sound/soc.h> | 17 | #include <sound/soc.h> |
19 | #include <asm/fsl_guts.h> | 18 | #include <asm/fsl_guts.h> |
20 | 19 | ||
21 | #include "fsl_dma.h" | 20 | #include "fsl_dma.h" |
22 | #include "fsl_ssi.h" | 21 | #include "fsl_ssi.h" |
22 | #include "fsl_utils.h" | ||
23 | 23 | ||
24 | /* P1022-specific PMUXCR and DMUXCR bit definitions */ | 24 | /* P1022-specific PMUXCR and DMUXCR bit definitions */ |
25 | 25 | ||
@@ -57,8 +57,6 @@ static inline void guts_set_dmuxcr(struct ccsr_guts __iomem *guts, | |||
57 | /* There's only one global utilities register */ | 57 | /* There's only one global utilities register */ |
58 | static phys_addr_t guts_phys; | 58 | static phys_addr_t guts_phys; |
59 | 59 | ||
60 | #define DAI_NAME_SIZE 32 | ||
61 | |||
62 | /** | 60 | /** |
63 | * machine_data: machine-specific ASoC device data | 61 | * machine_data: machine-specific ASoC device data |
64 | * | 62 | * |
@@ -75,7 +73,6 @@ struct machine_data { | |||
75 | unsigned int ssi_id; /* 0 = SSI1, 1 = SSI2, etc */ | 73 | unsigned int ssi_id; /* 0 = SSI1, 1 = SSI2, etc */ |
76 | unsigned int dma_id[2]; /* 0 = DMA1, 1 = DMA2, etc */ | 74 | unsigned int dma_id[2]; /* 0 = DMA1, 1 = DMA2, etc */ |
77 | unsigned int dma_channel_id[2]; /* 0 = ch 0, 1 = ch 1, etc*/ | 75 | unsigned int dma_channel_id[2]; /* 0 = ch 0, 1 = ch 1, etc*/ |
78 | char codec_name[DAI_NAME_SIZE]; | ||
79 | char platform_name[2][DAI_NAME_SIZE]; /* One for each DMA channel */ | 76 | char platform_name[2][DAI_NAME_SIZE]; /* One for each DMA channel */ |
80 | }; | 77 | }; |
81 | 78 | ||
@@ -191,136 +188,6 @@ static struct snd_soc_ops p1022_ds_ops = { | |||
191 | }; | 188 | }; |
192 | 189 | ||
193 | /** | 190 | /** |
194 | * get_node_by_phandle_name - get a node by its phandle name | ||
195 | * | ||
196 | * This function takes a node, the name of a property in that node, and a | ||
197 | * compatible string. Assuming the property is a phandle to another node, | ||
198 | * it returns that node, (optionally) if that node is compatible. | ||
199 | * | ||
200 | * If the property is not a phandle, or the node it points to is not compatible | ||
201 | * with the specific string, then NULL is returned. | ||
202 | */ | ||
203 | static struct device_node *get_node_by_phandle_name(struct device_node *np, | ||
204 | const char *name, const char *compatible) | ||
205 | { | ||
206 | np = of_parse_phandle(np, name, 0); | ||
207 | if (!np) | ||
208 | return NULL; | ||
209 | |||
210 | if (!of_device_is_compatible(np, compatible)) { | ||
211 | of_node_put(np); | ||
212 | return NULL; | ||
213 | } | ||
214 | |||
215 | return np; | ||
216 | } | ||
217 | |||
218 | /** | ||
219 | * get_parent_cell_index -- return the cell-index of the parent of a node | ||
220 | * | ||
221 | * Return the value of the cell-index property of the parent of the given | ||
222 | * node. This is used for DMA channel nodes that need to know the DMA ID | ||
223 | * of the controller they are on. | ||
224 | */ | ||
225 | static int get_parent_cell_index(struct device_node *np) | ||
226 | { | ||
227 | struct device_node *parent = of_get_parent(np); | ||
228 | const u32 *iprop; | ||
229 | int ret = -1; | ||
230 | |||
231 | if (!parent) | ||
232 | return -1; | ||
233 | |||
234 | iprop = of_get_property(parent, "cell-index", NULL); | ||
235 | if (iprop) | ||
236 | ret = be32_to_cpup(iprop); | ||
237 | |||
238 | of_node_put(parent); | ||
239 | |||
240 | return ret; | ||
241 | } | ||
242 | |||
243 | /** | ||
244 | * codec_node_dev_name - determine the dev_name for a codec node | ||
245 | * | ||
246 | * This function determines the dev_name for an I2C node. This is the name | ||
247 | * that would be returned by dev_name() if this device_node were part of a | ||
248 | * 'struct device' It's ugly and hackish, but it works. | ||
249 | * | ||
250 | * The dev_name for such devices include the bus number and I2C address. For | ||
251 | * example, "cs4270-codec.0-004f". | ||
252 | */ | ||
253 | static int codec_node_dev_name(struct device_node *np, char *buf, size_t len) | ||
254 | { | ||
255 | const u32 *iprop; | ||
256 | int addr; | ||
257 | char temp[DAI_NAME_SIZE]; | ||
258 | struct i2c_client *i2c; | ||
259 | |||
260 | of_modalias_node(np, temp, DAI_NAME_SIZE); | ||
261 | |||
262 | iprop = of_get_property(np, "reg", NULL); | ||
263 | if (!iprop) | ||
264 | return -EINVAL; | ||
265 | |||
266 | addr = be32_to_cpup(iprop); | ||
267 | |||
268 | /* We need the adapter number */ | ||
269 | i2c = of_find_i2c_device_by_node(np); | ||
270 | if (!i2c) | ||
271 | return -ENODEV; | ||
272 | |||
273 | snprintf(buf, len, "%s.%u-%04x", temp, i2c->adapter->nr, addr); | ||
274 | |||
275 | return 0; | ||
276 | } | ||
277 | |||
278 | static int get_dma_channel(struct device_node *ssi_np, | ||
279 | const char *name, | ||
280 | struct snd_soc_dai_link *dai, | ||
281 | unsigned int *dma_channel_id, | ||
282 | unsigned int *dma_id) | ||
283 | { | ||
284 | struct resource res; | ||
285 | struct device_node *dma_channel_np; | ||
286 | const u32 *iprop; | ||
287 | int ret; | ||
288 | |||
289 | dma_channel_np = get_node_by_phandle_name(ssi_np, name, | ||
290 | "fsl,ssi-dma-channel"); | ||
291 | if (!dma_channel_np) | ||
292 | return -EINVAL; | ||
293 | |||
294 | /* Determine the dev_name for the device_node. This code mimics the | ||
295 | * behavior of of_device_make_bus_id(). We need this because ASoC uses | ||
296 | * the dev_name() of the device to match the platform (DMA) device with | ||
297 | * the CPU (SSI) device. It's all ugly and hackish, but it works (for | ||
298 | * now). | ||
299 | * | ||
300 | * dai->platform name should already point to an allocated buffer. | ||
301 | */ | ||
302 | ret = of_address_to_resource(dma_channel_np, 0, &res); | ||
303 | if (ret) { | ||
304 | of_node_put(dma_channel_np); | ||
305 | return ret; | ||
306 | } | ||
307 | snprintf((char *)dai->platform_name, DAI_NAME_SIZE, "%llx.%s", | ||
308 | (unsigned long long) res.start, dma_channel_np->name); | ||
309 | |||
310 | iprop = of_get_property(dma_channel_np, "cell-index", NULL); | ||
311 | if (!iprop) { | ||
312 | of_node_put(dma_channel_np); | ||
313 | return -EINVAL; | ||
314 | } | ||
315 | |||
316 | *dma_channel_id = be32_to_cpup(iprop); | ||
317 | *dma_id = get_parent_cell_index(dma_channel_np); | ||
318 | of_node_put(dma_channel_np); | ||
319 | |||
320 | return 0; | ||
321 | } | ||
322 | |||
323 | /** | ||
324 | * p1022_ds_probe: platform probe function for the machine driver | 191 | * p1022_ds_probe: platform probe function for the machine driver |
325 | * | 192 | * |
326 | * Although this is a machine driver, the SSI node is the "master" node with | 193 | * Although this is a machine driver, the SSI node is the "master" node with |
@@ -357,15 +224,8 @@ static int p1022_ds_probe(struct platform_device *pdev) | |||
357 | mdata->dai[0].cpu_dai_name = dev_name(&ssi_pdev->dev); | 224 | mdata->dai[0].cpu_dai_name = dev_name(&ssi_pdev->dev); |
358 | mdata->dai[0].ops = &p1022_ds_ops; | 225 | mdata->dai[0].ops = &p1022_ds_ops; |
359 | 226 | ||
360 | /* Determine the codec name, it will be used as the codec DAI name */ | 227 | /* ASoC core can match codec with device node */ |
361 | ret = codec_node_dev_name(codec_np, mdata->codec_name, DAI_NAME_SIZE); | 228 | mdata->dai[0].codec_of_node = codec_np; |
362 | if (ret) { | ||
363 | dev_err(&pdev->dev, "invalid codec node %s\n", | ||
364 | codec_np->full_name); | ||
365 | ret = -EINVAL; | ||
366 | goto error; | ||
367 | } | ||
368 | mdata->dai[0].codec_name = mdata->codec_name; | ||
369 | 229 | ||
370 | /* We register two DAIs per SSI, one for playback and the other for | 230 | /* We register two DAIs per SSI, one for playback and the other for |
371 | * capture. We support codecs that have separate DAIs for both playback | 231 | * capture. We support codecs that have separate DAIs for both playback |
@@ -462,9 +322,9 @@ static int p1022_ds_probe(struct platform_device *pdev) | |||
462 | 322 | ||
463 | /* Find the playback DMA channel to use. */ | 323 | /* Find the playback DMA channel to use. */ |
464 | mdata->dai[0].platform_name = mdata->platform_name[0]; | 324 | mdata->dai[0].platform_name = mdata->platform_name[0]; |
465 | ret = get_dma_channel(np, "fsl,playback-dma", &mdata->dai[0], | 325 | ret = fsl_asoc_get_dma_channel(np, "fsl,playback-dma", &mdata->dai[0], |
466 | &mdata->dma_channel_id[0], | 326 | &mdata->dma_channel_id[0], |
467 | &mdata->dma_id[0]); | 327 | &mdata->dma_id[0]); |
468 | if (ret) { | 328 | if (ret) { |
469 | dev_err(&pdev->dev, "missing/invalid playback DMA phandle\n"); | 329 | dev_err(&pdev->dev, "missing/invalid playback DMA phandle\n"); |
470 | goto error; | 330 | goto error; |
@@ -472,9 +332,9 @@ static int p1022_ds_probe(struct platform_device *pdev) | |||
472 | 332 | ||
473 | /* Find the capture DMA channel to use. */ | 333 | /* Find the capture DMA channel to use. */ |
474 | mdata->dai[1].platform_name = mdata->platform_name[1]; | 334 | mdata->dai[1].platform_name = mdata->platform_name[1]; |
475 | ret = get_dma_channel(np, "fsl,capture-dma", &mdata->dai[1], | 335 | ret = fsl_asoc_get_dma_channel(np, "fsl,capture-dma", &mdata->dai[1], |
476 | &mdata->dma_channel_id[1], | 336 | &mdata->dma_channel_id[1], |
477 | &mdata->dma_id[1]); | 337 | &mdata->dma_id[1]); |
478 | if (ret) { | 338 | if (ret) { |
479 | dev_err(&pdev->dev, "missing/invalid capture DMA phandle\n"); | 339 | dev_err(&pdev->dev, "missing/invalid capture DMA phandle\n"); |
480 | goto error; | 340 | goto error; |
diff --git a/sound/soc/fsl/phycore-ac97.c b/sound/soc/fsl/phycore-ac97.c new file mode 100644 index 000000000000..f8da6dd115ed --- /dev/null +++ b/sound/soc/fsl/phycore-ac97.c | |||
@@ -0,0 +1,125 @@ | |||
1 | /* | ||
2 | * phycore-ac97.c -- SoC audio for imx_phycore in AC97 mode | ||
3 | * | ||
4 | * Copyright 2009 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de> | ||
5 | * | ||
6 | * This program is free software; you can redistribute it and/or modify it | ||
7 | * under the terms of the GNU General Public License as published by the | ||
8 | * Free Software Foundation; either version 2 of the License, or (at your | ||
9 | * option) any later version. | ||
10 | * | ||
11 | */ | ||
12 | |||
13 | #include <linux/module.h> | ||
14 | #include <linux/moduleparam.h> | ||
15 | #include <linux/device.h> | ||
16 | #include <linux/i2c.h> | ||
17 | #include <sound/core.h> | ||
18 | #include <sound/pcm.h> | ||
19 | #include <sound/soc.h> | ||
20 | #include <asm/mach-types.h> | ||
21 | |||
22 | #include "imx-audmux.h" | ||
23 | |||
24 | static struct snd_soc_card imx_phycore; | ||
25 | |||
26 | static struct snd_soc_ops imx_phycore_hifi_ops = { | ||
27 | }; | ||
28 | |||
29 | static struct snd_soc_dai_link imx_phycore_dai_ac97[] = { | ||
30 | { | ||
31 | .name = "HiFi", | ||
32 | .stream_name = "HiFi", | ||
33 | .codec_dai_name = "wm9712-hifi", | ||
34 | .codec_name = "wm9712-codec", | ||
35 | .cpu_dai_name = "imx-ssi.0", | ||
36 | .platform_name = "imx-fiq-pcm-audio.0", | ||
37 | .ops = &imx_phycore_hifi_ops, | ||
38 | }, | ||
39 | }; | ||
40 | |||
41 | static struct snd_soc_card imx_phycore = { | ||
42 | .name = "PhyCORE-ac97-audio", | ||
43 | .owner = THIS_MODULE, | ||
44 | .dai_link = imx_phycore_dai_ac97, | ||
45 | .num_links = ARRAY_SIZE(imx_phycore_dai_ac97), | ||
46 | }; | ||
47 | |||
48 | static struct platform_device *imx_phycore_snd_ac97_device; | ||
49 | static struct platform_device *imx_phycore_snd_device; | ||
50 | |||
51 | static int __init imx_phycore_init(void) | ||
52 | { | ||
53 | int ret; | ||
54 | |||
55 | if (machine_is_pca100()) { | ||
56 | imx_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0, | ||
57 | IMX_AUDMUX_V1_PCR_SYN | /* 4wire mode */ | ||
58 | IMX_AUDMUX_V1_PCR_TFCSEL(3) | | ||
59 | IMX_AUDMUX_V1_PCR_TCLKDIR | /* clock is output */ | ||
60 | IMX_AUDMUX_V1_PCR_RXDSEL(3)); | ||
61 | imx_audmux_v1_configure_port(3, | ||
62 | IMX_AUDMUX_V1_PCR_SYN | /* 4wire mode */ | ||
63 | IMX_AUDMUX_V1_PCR_TFCSEL(0) | | ||
64 | IMX_AUDMUX_V1_PCR_TFSDIR | | ||
65 | IMX_AUDMUX_V1_PCR_RXDSEL(0)); | ||
66 | } else if (machine_is_pcm043()) { | ||
67 | imx_audmux_v2_configure_port(3, | ||
68 | IMX_AUDMUX_V2_PTCR_SYN | /* 4wire mode */ | ||
69 | IMX_AUDMUX_V2_PTCR_TFSEL(0) | | ||
70 | IMX_AUDMUX_V2_PTCR_TFSDIR, | ||
71 | IMX_AUDMUX_V2_PDCR_RXDSEL(0)); | ||
72 | imx_audmux_v2_configure_port(0, | ||
73 | IMX_AUDMUX_V2_PTCR_SYN | /* 4wire mode */ | ||
74 | IMX_AUDMUX_V2_PTCR_TCSEL(3) | | ||
75 | IMX_AUDMUX_V2_PTCR_TCLKDIR, /* clock is output */ | ||
76 | IMX_AUDMUX_V2_PDCR_RXDSEL(3)); | ||
77 | } else { | ||
78 | /* return happy. We might run on a totally different machine */ | ||
79 | return 0; | ||
80 | } | ||
81 | |||
82 | imx_phycore_snd_ac97_device = platform_device_alloc("soc-audio", -1); | ||
83 | if (!imx_phycore_snd_ac97_device) | ||
84 | return -ENOMEM; | ||
85 | |||
86 | platform_set_drvdata(imx_phycore_snd_ac97_device, &imx_phycore); | ||
87 | ret = platform_device_add(imx_phycore_snd_ac97_device); | ||
88 | if (ret) | ||
89 | goto fail1; | ||
90 | |||
91 | imx_phycore_snd_device = platform_device_alloc("wm9712-codec", -1); | ||
92 | if (!imx_phycore_snd_device) { | ||
93 | ret = -ENOMEM; | ||
94 | goto fail2; | ||
95 | } | ||
96 | ret = platform_device_add(imx_phycore_snd_device); | ||
97 | |||
98 | if (ret) { | ||
99 | printk(KERN_ERR "ASoC: Platform device allocation failed\n"); | ||
100 | goto fail3; | ||
101 | } | ||
102 | |||
103 | return 0; | ||
104 | |||
105 | fail3: | ||
106 | platform_device_put(imx_phycore_snd_device); | ||
107 | fail2: | ||
108 | platform_device_del(imx_phycore_snd_ac97_device); | ||
109 | fail1: | ||
110 | platform_device_put(imx_phycore_snd_ac97_device); | ||
111 | return ret; | ||
112 | } | ||
113 | |||
114 | static void __exit imx_phycore_exit(void) | ||
115 | { | ||
116 | platform_device_unregister(imx_phycore_snd_device); | ||
117 | platform_device_unregister(imx_phycore_snd_ac97_device); | ||
118 | } | ||
119 | |||
120 | late_initcall(imx_phycore_init); | ||
121 | module_exit(imx_phycore_exit); | ||
122 | |||
123 | MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>"); | ||
124 | MODULE_DESCRIPTION("PhyCORE ALSA SoC driver"); | ||
125 | MODULE_LICENSE("GPL"); | ||
diff --git a/sound/soc/fsl/wm1133-ev1.c b/sound/soc/fsl/wm1133-ev1.c new file mode 100644 index 000000000000..fe54a69073e5 --- /dev/null +++ b/sound/soc/fsl/wm1133-ev1.c | |||
@@ -0,0 +1,304 @@ | |||
1 | /* | ||
2 | * wm1133-ev1.c - Audio for WM1133-EV1 on i.MX31ADS | ||
3 | * | ||
4 | * Copyright (c) 2010 Wolfson Microelectronics plc | ||
5 | * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> | ||
6 | * | ||
7 | * Based on an earlier driver for the same hardware by Liam Girdwood. | ||
8 | * | ||
9 | * This program is free software; you can redistribute it and/or modify it | ||
10 | * under the terms of the GNU General Public License as published by the | ||
11 | * Free Software Foundation; either version 2 of the License, or (at your | ||
12 | * option) any later version. | ||
13 | */ | ||
14 | |||
15 | #include <linux/platform_device.h> | ||
16 | #include <linux/clk.h> | ||
17 | #include <linux/module.h> | ||
18 | #include <sound/core.h> | ||
19 | #include <sound/jack.h> | ||
20 | #include <sound/pcm.h> | ||
21 | #include <sound/pcm_params.h> | ||
22 | #include <sound/soc.h> | ||
23 | |||
24 | #include "imx-ssi.h" | ||
25 | #include "../codecs/wm8350.h" | ||
26 | #include "imx-audmux.h" | ||
27 | |||
28 | /* There is a silicon mic on the board optionally connected via a solder pad | ||
29 | * SP1. Define this to enable it. | ||
30 | */ | ||
31 | #undef USE_SIMIC | ||
32 | |||
33 | struct _wm8350_audio { | ||
34 | unsigned int channels; | ||
35 | snd_pcm_format_t format; | ||
36 | unsigned int rate; | ||
37 | unsigned int sysclk; | ||
38 | unsigned int bclkdiv; | ||
39 | unsigned int clkdiv; | ||
40 | unsigned int lr_rate; | ||
41 | }; | ||
42 | |||
43 | /* in order of power consumption per rate (lowest first) */ | ||
44 | static const struct _wm8350_audio wm8350_audio[] = { | ||
45 | /* 16bit mono modes */ | ||
46 | {1, SNDRV_PCM_FORMAT_S16_LE, 8000, 12288000 >> 1, | ||
47 | WM8350_BCLK_DIV_48, WM8350_DACDIV_3, 16,}, | ||
48 | |||
49 | /* 16 bit stereo modes */ | ||
50 | {2, SNDRV_PCM_FORMAT_S16_LE, 8000, 12288000, | ||
51 | WM8350_BCLK_DIV_48, WM8350_DACDIV_6, 32,}, | ||
52 | {2, SNDRV_PCM_FORMAT_S16_LE, 16000, 12288000, | ||
53 | WM8350_BCLK_DIV_24, WM8350_DACDIV_3, 32,}, | ||
54 | {2, SNDRV_PCM_FORMAT_S16_LE, 32000, 12288000, | ||
55 | WM8350_BCLK_DIV_12, WM8350_DACDIV_1_5, 32,}, | ||
56 | {2, SNDRV_PCM_FORMAT_S16_LE, 48000, 12288000, | ||
57 | WM8350_BCLK_DIV_8, WM8350_DACDIV_1, 32,}, | ||
58 | {2, SNDRV_PCM_FORMAT_S16_LE, 96000, 24576000, | ||
59 | WM8350_BCLK_DIV_8, WM8350_DACDIV_1, 32,}, | ||
60 | {2, SNDRV_PCM_FORMAT_S16_LE, 11025, 11289600, | ||
61 | WM8350_BCLK_DIV_32, WM8350_DACDIV_4, 32,}, | ||
62 | {2, SNDRV_PCM_FORMAT_S16_LE, 22050, 11289600, | ||
63 | WM8350_BCLK_DIV_16, WM8350_DACDIV_2, 32,}, | ||
64 | {2, SNDRV_PCM_FORMAT_S16_LE, 44100, 11289600, | ||
65 | WM8350_BCLK_DIV_8, WM8350_DACDIV_1, 32,}, | ||
66 | {2, SNDRV_PCM_FORMAT_S16_LE, 88200, 22579200, | ||
67 | WM8350_BCLK_DIV_8, WM8350_DACDIV_1, 32,}, | ||
68 | |||
69 | /* 24bit stereo modes */ | ||
70 | {2, SNDRV_PCM_FORMAT_S24_LE, 48000, 12288000, | ||
71 | WM8350_BCLK_DIV_4, WM8350_DACDIV_1, 64,}, | ||
72 | {2, SNDRV_PCM_FORMAT_S24_LE, 96000, 24576000, | ||
73 | WM8350_BCLK_DIV_4, WM8350_DACDIV_1, 64,}, | ||
74 | {2, SNDRV_PCM_FORMAT_S24_LE, 44100, 11289600, | ||
75 | WM8350_BCLK_DIV_4, WM8350_DACDIV_1, 64,}, | ||
76 | {2, SNDRV_PCM_FORMAT_S24_LE, 88200, 22579200, | ||
77 | WM8350_BCLK_DIV_4, WM8350_DACDIV_1, 64,}, | ||
78 | }; | ||
79 | |||
80 | static int wm1133_ev1_hw_params(struct snd_pcm_substream *substream, | ||
81 | struct snd_pcm_hw_params *params) | ||
82 | { | ||
83 | struct snd_soc_pcm_runtime *rtd = substream->private_data; | ||
84 | struct snd_soc_dai *codec_dai = rtd->codec_dai; | ||
85 | struct snd_soc_dai *cpu_dai = rtd->cpu_dai; | ||
86 | int i, found = 0; | ||
87 | snd_pcm_format_t format = params_format(params); | ||
88 | unsigned int rate = params_rate(params); | ||
89 | unsigned int channels = params_channels(params); | ||
90 | u32 dai_format; | ||
91 | |||
92 | /* find the correct audio parameters */ | ||
93 | for (i = 0; i < ARRAY_SIZE(wm8350_audio); i++) { | ||
94 | if (rate == wm8350_audio[i].rate && | ||
95 | format == wm8350_audio[i].format && | ||
96 | channels == wm8350_audio[i].channels) { | ||
97 | found = 1; | ||
98 | break; | ||
99 | } | ||
100 | } | ||
101 | if (!found) | ||
102 | return -EINVAL; | ||
103 | |||
104 | /* codec FLL input is 14.75 MHz from MCLK */ | ||
105 | snd_soc_dai_set_pll(codec_dai, 0, 0, 14750000, wm8350_audio[i].sysclk); | ||
106 | |||
107 | dai_format = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | | ||
108 | SND_SOC_DAIFMT_CBM_CFM; | ||
109 | |||
110 | /* set codec DAI configuration */ | ||
111 | snd_soc_dai_set_fmt(codec_dai, dai_format); | ||
112 | |||
113 | /* set cpu DAI configuration */ | ||
114 | snd_soc_dai_set_fmt(cpu_dai, dai_format); | ||
115 | |||
116 | /* TODO: The SSI driver should figure this out for us */ | ||
117 | switch (channels) { | ||
118 | case 2: | ||
119 | snd_soc_dai_set_tdm_slot(cpu_dai, 0xffffffc, 0xffffffc, 2, 0); | ||
120 | break; | ||
121 | case 1: | ||
122 | snd_soc_dai_set_tdm_slot(cpu_dai, 0xffffffe, 0xffffffe, 1, 0); | ||
123 | break; | ||
124 | default: | ||
125 | return -EINVAL; | ||
126 | } | ||
127 | |||
128 | /* set MCLK as the codec system clock for DAC and ADC */ | ||
129 | snd_soc_dai_set_sysclk(codec_dai, WM8350_MCLK_SEL_PLL_MCLK, | ||
130 | wm8350_audio[i].sysclk, SND_SOC_CLOCK_IN); | ||
131 | |||
132 | /* set codec BCLK division for sample rate */ | ||
133 | snd_soc_dai_set_clkdiv(codec_dai, WM8350_BCLK_CLKDIV, | ||
134 | wm8350_audio[i].bclkdiv); | ||
135 | |||
136 | /* DAI is synchronous and clocked with DAC LRCLK & ADC LRC */ | ||
137 | snd_soc_dai_set_clkdiv(codec_dai, | ||
138 | WM8350_DACLR_CLKDIV, wm8350_audio[i].lr_rate); | ||
139 | snd_soc_dai_set_clkdiv(codec_dai, | ||
140 | WM8350_ADCLR_CLKDIV, wm8350_audio[i].lr_rate); | ||
141 | |||
142 | /* now configure DAC and ADC clocks */ | ||
143 | snd_soc_dai_set_clkdiv(codec_dai, | ||
144 | WM8350_DAC_CLKDIV, wm8350_audio[i].clkdiv); | ||
145 | |||
146 | snd_soc_dai_set_clkdiv(codec_dai, | ||
147 | WM8350_ADC_CLKDIV, wm8350_audio[i].clkdiv); | ||
148 | |||
149 | return 0; | ||
150 | } | ||
151 | |||
152 | static struct snd_soc_ops wm1133_ev1_ops = { | ||
153 | .hw_params = wm1133_ev1_hw_params, | ||
154 | }; | ||
155 | |||
156 | static const struct snd_soc_dapm_widget wm1133_ev1_widgets[] = { | ||
157 | #ifdef USE_SIMIC | ||
158 | SND_SOC_DAPM_MIC("SiMIC", NULL), | ||
159 | #endif | ||
160 | SND_SOC_DAPM_MIC("Mic1 Jack", NULL), | ||
161 | SND_SOC_DAPM_MIC("Mic2 Jack", NULL), | ||
162 | SND_SOC_DAPM_LINE("Line In Jack", NULL), | ||
163 | SND_SOC_DAPM_LINE("Line Out Jack", NULL), | ||
164 | SND_SOC_DAPM_HP("Headphone Jack", NULL), | ||
165 | }; | ||
166 | |||
167 | /* imx32ads soc_card audio map */ | ||
168 | static const struct snd_soc_dapm_route wm1133_ev1_map[] = { | ||
169 | |||
170 | #ifdef USE_SIMIC | ||
171 | /* SiMIC --> IN1LN (with automatic bias) via SP1 */ | ||
172 | { "IN1LN", NULL, "Mic Bias" }, | ||
173 | { "Mic Bias", NULL, "SiMIC" }, | ||
174 | #endif | ||
175 | |||
176 | /* Mic 1 Jack --> IN1LN and IN1LP (with automatic bias) */ | ||
177 | { "IN1LN", NULL, "Mic Bias" }, | ||
178 | { "IN1LP", NULL, "Mic1 Jack" }, | ||
179 | { "Mic Bias", NULL, "Mic1 Jack" }, | ||
180 | |||
181 | /* Mic 2 Jack --> IN1RN and IN1RP (with automatic bias) */ | ||
182 | { "IN1RN", NULL, "Mic Bias" }, | ||
183 | { "IN1RP", NULL, "Mic2 Jack" }, | ||
184 | { "Mic Bias", NULL, "Mic2 Jack" }, | ||
185 | |||
186 | /* Line in Jack --> AUX (L+R) */ | ||
187 | { "IN3R", NULL, "Line In Jack" }, | ||
188 | { "IN3L", NULL, "Line In Jack" }, | ||
189 | |||
190 | /* Out1 --> Headphone Jack */ | ||
191 | { "Headphone Jack", NULL, "OUT1R" }, | ||
192 | { "Headphone Jack", NULL, "OUT1L" }, | ||
193 | |||
194 | /* Out1 --> Line Out Jack */ | ||
195 | { "Line Out Jack", NULL, "OUT2R" }, | ||
196 | { "Line Out Jack", NULL, "OUT2L" }, | ||
197 | }; | ||
198 | |||
199 | static struct snd_soc_jack hp_jack; | ||
200 | |||
201 | static struct snd_soc_jack_pin hp_jack_pins[] = { | ||
202 | { .pin = "Headphone Jack", .mask = SND_JACK_HEADPHONE }, | ||
203 | }; | ||
204 | |||
205 | static struct snd_soc_jack mic_jack; | ||
206 | |||
207 | static struct snd_soc_jack_pin mic_jack_pins[] = { | ||
208 | { .pin = "Mic1 Jack", .mask = SND_JACK_MICROPHONE }, | ||
209 | { .pin = "Mic2 Jack", .mask = SND_JACK_MICROPHONE }, | ||
210 | }; | ||
211 | |||
212 | static int wm1133_ev1_init(struct snd_soc_pcm_runtime *rtd) | ||
213 | { | ||
214 | struct snd_soc_codec *codec = rtd->codec; | ||
215 | struct snd_soc_dapm_context *dapm = &codec->dapm; | ||
216 | |||
217 | snd_soc_dapm_new_controls(dapm, wm1133_ev1_widgets, | ||
218 | ARRAY_SIZE(wm1133_ev1_widgets)); | ||
219 | |||
220 | snd_soc_dapm_add_routes(dapm, wm1133_ev1_map, | ||
221 | ARRAY_SIZE(wm1133_ev1_map)); | ||
222 | |||
223 | /* Headphone jack detection */ | ||
224 | snd_soc_jack_new(codec, "Headphone", SND_JACK_HEADPHONE, &hp_jack); | ||
225 | snd_soc_jack_add_pins(&hp_jack, ARRAY_SIZE(hp_jack_pins), | ||
226 | hp_jack_pins); | ||
227 | wm8350_hp_jack_detect(codec, WM8350_JDR, &hp_jack, SND_JACK_HEADPHONE); | ||
228 | |||
229 | /* Microphone jack detection */ | ||
230 | snd_soc_jack_new(codec, "Microphone", | ||
231 | SND_JACK_MICROPHONE | SND_JACK_BTN_0, &mic_jack); | ||
232 | snd_soc_jack_add_pins(&mic_jack, ARRAY_SIZE(mic_jack_pins), | ||
233 | mic_jack_pins); | ||
234 | wm8350_mic_jack_detect(codec, &mic_jack, SND_JACK_MICROPHONE, | ||
235 | SND_JACK_BTN_0); | ||
236 | |||
237 | snd_soc_dapm_force_enable_pin(dapm, "Mic Bias"); | ||
238 | |||
239 | return 0; | ||
240 | } | ||
241 | |||
242 | |||
243 | static struct snd_soc_dai_link wm1133_ev1_dai = { | ||
244 | .name = "WM1133-EV1", | ||
245 | .stream_name = "Audio", | ||
246 | .cpu_dai_name = "imx-ssi.0", | ||
247 | .codec_dai_name = "wm8350-hifi", | ||
248 | .platform_name = "imx-fiq-pcm-audio.0", | ||
249 | .codec_name = "wm8350-codec.0-0x1a", | ||
250 | .init = wm1133_ev1_init, | ||
251 | .ops = &wm1133_ev1_ops, | ||
252 | .symmetric_rates = 1, | ||
253 | }; | ||
254 | |||
255 | static struct snd_soc_card wm1133_ev1 = { | ||
256 | .name = "WM1133-EV1", | ||
257 | .owner = THIS_MODULE, | ||
258 | .dai_link = &wm1133_ev1_dai, | ||
259 | .num_links = 1, | ||
260 | }; | ||
261 | |||
262 | static struct platform_device *wm1133_ev1_snd_device; | ||
263 | |||
264 | static int __init wm1133_ev1_audio_init(void) | ||
265 | { | ||
266 | int ret; | ||
267 | unsigned int ptcr, pdcr; | ||
268 | |||
269 | /* SSI0 mastered by port 5 */ | ||
270 | ptcr = IMX_AUDMUX_V2_PTCR_SYN | | ||
271 | IMX_AUDMUX_V2_PTCR_TFSDIR | | ||
272 | IMX_AUDMUX_V2_PTCR_TFSEL(MX31_AUDMUX_PORT5_SSI_PINS_5) | | ||
273 | IMX_AUDMUX_V2_PTCR_TCLKDIR | | ||
274 | IMX_AUDMUX_V2_PTCR_TCSEL(MX31_AUDMUX_PORT5_SSI_PINS_5); | ||
275 | pdcr = IMX_AUDMUX_V2_PDCR_RXDSEL(MX31_AUDMUX_PORT5_SSI_PINS_5); | ||
276 | imx_audmux_v2_configure_port(MX31_AUDMUX_PORT1_SSI0, ptcr, pdcr); | ||
277 | |||
278 | ptcr = IMX_AUDMUX_V2_PTCR_SYN; | ||
279 | pdcr = IMX_AUDMUX_V2_PDCR_RXDSEL(MX31_AUDMUX_PORT1_SSI0); | ||
280 | imx_audmux_v2_configure_port(MX31_AUDMUX_PORT5_SSI_PINS_5, ptcr, pdcr); | ||
281 | |||
282 | wm1133_ev1_snd_device = platform_device_alloc("soc-audio", -1); | ||
283 | if (!wm1133_ev1_snd_device) | ||
284 | return -ENOMEM; | ||
285 | |||
286 | platform_set_drvdata(wm1133_ev1_snd_device, &wm1133_ev1); | ||
287 | ret = platform_device_add(wm1133_ev1_snd_device); | ||
288 | |||
289 | if (ret) | ||
290 | platform_device_put(wm1133_ev1_snd_device); | ||
291 | |||
292 | return ret; | ||
293 | } | ||
294 | module_init(wm1133_ev1_audio_init); | ||
295 | |||
296 | static void __exit wm1133_ev1_audio_exit(void) | ||
297 | { | ||
298 | platform_device_unregister(wm1133_ev1_snd_device); | ||
299 | } | ||
300 | module_exit(wm1133_ev1_audio_exit); | ||
301 | |||
302 | MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); | ||
303 | MODULE_DESCRIPTION("Audio for WM1133-EV1 on i.MX31ADS"); | ||
304 | MODULE_LICENSE("GPL"); | ||