1 files changed, 156 insertions, 0 deletions

diff --git a/sound/pci/echoaudio/darla24_dsp.c b/sound/pci/echoaudio/darla24_dsp.c
new file mode 100644
index 000000000000..79938eed7e9c
--- /dev/null
+++ b/sound/pci/echoaudio/darla24_dsp.c
@@ -0,0 +1,156 @@
+/***************************************************************************
+
+   Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+   All rights reserved
+   www.echoaudio.com
+
+   This file is part of Echo Digital Audio's generic driver library.
+
+   Echo Digital Audio's generic driver library is free software;
+   you can redistribute it and/or modify it under the terms of
+   the GNU General Public License as published by the Free Software
+   Foundation.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+   MA  02111-1307, USA.
+
+   *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+
+static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
+{
+        int err;
+
+        DE_INIT(("init_hw() - Darla24\n"));
+        snd_assert((subdevice_id & 0xfff0) == DARLA24, return -ENODEV);
+
+        if ((err = init_dsp_comm_page(chip))) {
+                DE_INIT(("init_hw - could not initialize DSP comm page\n"));
+                return err;
+        }
+
+        chip->device_id = device_id;
+        chip->subdevice_id = subdevice_id;
+        chip->bad_board = TRUE;
+        chip->dsp_code_to_load = &card_fw[FW_DARLA24_DSP];
+        /* Since this card has no ASIC, mark it as loaded so everything
+           works OK */
+        chip->asic_loaded = TRUE;
+        chip->input_clock_types = ECHO_CLOCK_BIT_INTERNAL |
+                ECHO_CLOCK_BIT_ESYNC;
+
+        if ((err = load_firmware(chip)) < 0)
+                return err;
+        chip->bad_board = FALSE;
+
+        if ((err = init_line_levels(chip)) < 0)
+                return err;
+
+        DE_INIT(("init_hw done\n"));
+        return err;
+}
+
+
+
+static u32 detect_input_clocks(const struct echoaudio *chip)
+{
+        u32 clocks_from_dsp, clock_bits;
+
+        /* Map the DSP clock detect bits to the generic driver clock
+           detect bits */
+        clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks);
+
+        clock_bits = ECHO_CLOCK_BIT_INTERNAL;
+
+        if (clocks_from_dsp & GLDM_CLOCK_DETECT_BIT_ESYNC)
+                clock_bits |= ECHO_CLOCK_BIT_ESYNC;
+
+        return clock_bits;
+}
+
+
+
+/* The Darla24 has no ASIC. Just do nothing */
+static int load_asic(struct echoaudio *chip)
+{
+        return 0;
+}
+
+
+
+static int set_sample_rate(struct echoaudio *chip, u32 rate)
+{
+        u8 clock;
+
+        switch (rate) {
+        case 96000:
+                clock = GD24_96000;
+                break;
+        case 88200:
+                clock = GD24_88200;
+                break;
+        case 48000:
+                clock = GD24_48000;
+                break;
+        case 44100:
+                clock = GD24_44100;
+                break;
+        case 32000:
+                clock = GD24_32000;
+                break;
+        case 22050:
+                clock = GD24_22050;
+                break;
+        case 16000:
+                clock = GD24_16000;
+                break;
+        case 11025:
+                clock = GD24_11025;
+                break;
+        case 8000:
+                clock = GD24_8000;
+                break;
+        default:
+                DE_ACT(("set_sample_rate: Error, invalid sample rate %d\n",
+                        rate));
+                return -EINVAL;
+        }
+
+        if (wait_handshake(chip))
+                return -EIO;
+
+        DE_ACT(("set_sample_rate: %d clock %d\n", rate, clock));
+        chip->sample_rate = rate;
+
+        /* Override the sample rate if this card is set to Echo sync. */
+        if (chip->input_clock == ECHO_CLOCK_ESYNC)
+                clock = GD24_EXT_SYNC;
+
+        chip->comm_page->sample_rate = cpu_to_le32(rate);       /* ignored by the DSP ? */
+        chip->comm_page->gd_clock_state = clock;
+        clear_handshake(chip);
+        return send_vector(chip, DSP_VC_SET_GD_AUDIO_STATE);
+}
+
+
+
+static int set_input_clock(struct echoaudio *chip, u16 clock)
+{
+        snd_assert(clock == ECHO_CLOCK_INTERNAL ||
+                   clock == ECHO_CLOCK_ESYNC, return -EINVAL);
+        chip->input_clock = clock;
+        return set_sample_rate(chip, chip->sample_rate);
+}
+