diff options
Diffstat (limited to 'sound/pci/ca0106/ca0106.h')
| -rw-r--r-- | sound/pci/ca0106/ca0106.h | 549 |
1 files changed, 549 insertions, 0 deletions
diff --git a/sound/pci/ca0106/ca0106.h b/sound/pci/ca0106/ca0106.h new file mode 100644 index 000000000000..deb028851056 --- /dev/null +++ b/sound/pci/ca0106/ca0106.h | |||
| @@ -0,0 +1,549 @@ | |||
| 1 | /* | ||
| 2 | * Copyright (c) 2004 James Courtier-Dutton <James@superbug.demon.co.uk> | ||
| 3 | * Driver CA0106 chips. e.g. Sound Blaster Audigy LS and Live 24bit | ||
| 4 | * Version: 0.0.20 | ||
| 5 | * | ||
| 6 | * FEATURES currently supported: | ||
| 7 | * See ca0106_main.c for features. | ||
| 8 | * | ||
| 9 | * Changelog: | ||
| 10 | * Support interrupts per period. | ||
| 11 | * Removed noise from Center/LFE channel when in Analog mode. | ||
| 12 | * Rename and remove mixer controls. | ||
| 13 | * 0.0.6 | ||
| 14 | * Use separate card based DMA buffer for periods table list. | ||
| 15 | * 0.0.7 | ||
| 16 | * Change remove and rename ctrls into lists. | ||
| 17 | * 0.0.8 | ||
| 18 | * Try to fix capture sources. | ||
| 19 | * 0.0.9 | ||
| 20 | * Fix AC3 output. | ||
| 21 | * Enable S32_LE format support. | ||
| 22 | * 0.0.10 | ||
| 23 | * Enable playback 48000 and 96000 rates. (Rates other that these do not work, even with "plug:front".) | ||
| 24 | * 0.0.11 | ||
| 25 | * Add Model name recognition. | ||
| 26 | * 0.0.12 | ||
| 27 | * Correct interrupt timing. interrupt at end of period, instead of in the middle of a playback period. | ||
| 28 | * Remove redundent "voice" handling. | ||
| 29 | * 0.0.13 | ||
| 30 | * Single trigger call for multi channels. | ||
| 31 | * 0.0.14 | ||
| 32 | * Set limits based on what the sound card hardware can do. | ||
| 33 | * playback periods_min=2, periods_max=8 | ||
| 34 | * capture hw constraints require period_size = n * 64 bytes. | ||
| 35 | * playback hw constraints require period_size = n * 64 bytes. | ||
| 36 | * 0.0.15 | ||
| 37 | * Separated ca0106.c into separate functional .c files. | ||
| 38 | * 0.0.16 | ||
| 39 | * Implement 192000 sample rate. | ||
| 40 | * 0.0.17 | ||
| 41 | * Add support for SB0410 and SB0413. | ||
| 42 | * 0.0.18 | ||
| 43 | * Modified Copyright message. | ||
| 44 | * 0.0.19 | ||
| 45 | * Added I2C and SPI registers. Filled in interrupt enable. | ||
| 46 | * 0.0.20 | ||
| 47 | * Added GPIO info for SB Live 24bit. | ||
| 48 | * | ||
| 49 | * | ||
| 50 | * This code was initally based on code from ALSA's emu10k1x.c which is: | ||
| 51 | * Copyright (c) by Francisco Moraes <fmoraes@nc.rr.com> | ||
| 52 | * | ||
| 53 | * This program is free software; you can redistribute it and/or modify | ||
| 54 | * it under the terms of the GNU General Public License as published by | ||
| 55 | * the Free Software Foundation; either version 2 of the License, or | ||
| 56 | * (at your option) any later version. | ||
| 57 | * | ||
| 58 | * This program is distributed in the hope that it will be useful, | ||
| 59 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | ||
| 60 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | ||
| 61 | * GNU General Public License for more details. | ||
| 62 | * | ||
| 63 | * You should have received a copy of the GNU General Public License | ||
| 64 | * along with this program; if not, write to the Free Software | ||
| 65 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | ||
| 66 | * | ||
| 67 | */ | ||
| 68 | |||
| 69 | /************************************************************************************************/ | ||
| 70 | /* PCI function 0 registers, address = <val> + PCIBASE0 */ | ||
| 71 | /************************************************************************************************/ | ||
| 72 | |||
| 73 | #define PTR 0x00 /* Indexed register set pointer register */ | ||
| 74 | /* NOTE: The CHANNELNUM and ADDRESS words can */ | ||
| 75 | /* be modified independently of each other. */ | ||
| 76 | /* CNL[1:0], ADDR[27:16] */ | ||
| 77 | |||
| 78 | #define DATA 0x04 /* Indexed register set data register */ | ||
| 79 | /* DATA[31:0] */ | ||
| 80 | |||
| 81 | #define IPR 0x08 /* Global interrupt pending register */ | ||
| 82 | /* Clear pending interrupts by writing a 1 to */ | ||
| 83 | /* the relevant bits and zero to the other bits */ | ||
| 84 | #define IPR_MIDI_RX_B 0x00020000 /* MIDI UART-B Receive buffer non-empty */ | ||
| 85 | #define IPR_MIDI_TX_B 0x00010000 /* MIDI UART-B Transmit buffer empty */ | ||
| 86 | #define IPR_SPDIF_IN_USER 0x00004000 /* SPDIF input user data has 16 more bits */ | ||
| 87 | #define IPR_SPDIF_OUT_USER 0x00002000 /* SPDIF output user data needs 16 more bits */ | ||
| 88 | #define IPR_SPDIF_OUT_FRAME 0x00001000 /* SPDIF frame about to start */ | ||
| 89 | #define IPR_SPI 0x00000800 /* SPI transaction completed */ | ||
| 90 | #define IPR_I2C_EEPROM 0x00000400 /* I2C EEPROM transaction completed */ | ||
| 91 | #define IPR_I2C_DAC 0x00000200 /* I2C DAC transaction completed */ | ||
| 92 | #define IPR_AI 0x00000100 /* Audio pending register changed. See PTR reg 0x76 */ | ||
| 93 | #define IPR_GPI 0x00000080 /* General Purpose input changed */ | ||
| 94 | #define IPR_SRC_LOCKED 0x00000040 /* SRC lock status changed */ | ||
| 95 | #define IPR_SPDIF_STATUS 0x00000020 /* SPDIF status changed */ | ||
| 96 | #define IPR_TIMER2 0x00000010 /* 192000Hz Timer */ | ||
| 97 | #define IPR_TIMER1 0x00000008 /* 44100Hz Timer */ | ||
| 98 | #define IPR_MIDI_RX_A 0x00000004 /* MIDI UART-A Receive buffer non-empty */ | ||
| 99 | #define IPR_MIDI_TX_A 0x00000002 /* MIDI UART-A Transmit buffer empty */ | ||
| 100 | #define IPR_PCI 0x00000001 /* PCI Bus error */ | ||
| 101 | |||
| 102 | #define INTE 0x0c /* Interrupt enable register */ | ||
| 103 | |||
| 104 | #define INTE_MIDI_RX_B 0x00020000 /* MIDI UART-B Receive buffer non-empty */ | ||
| 105 | #define INTE_MIDI_TX_B 0x00010000 /* MIDI UART-B Transmit buffer empty */ | ||
| 106 | #define INTE_SPDIF_IN_USER 0x00004000 /* SPDIF input user data has 16 more bits */ | ||
| 107 | #define INTE_SPDIF_OUT_USER 0x00002000 /* SPDIF output user data needs 16 more bits */ | ||
| 108 | #define INTE_SPDIF_OUT_FRAME 0x00001000 /* SPDIF frame about to start */ | ||
| 109 | #define INTE_SPI 0x00000800 /* SPI transaction completed */ | ||
| 110 | #define INTE_I2C_EEPROM 0x00000400 /* I2C EEPROM transaction completed */ | ||
| 111 | #define INTE_I2C_DAC 0x00000200 /* I2C DAC transaction completed */ | ||
| 112 | #define INTE_AI 0x00000100 /* Audio pending register changed. See PTR reg 0x75 */ | ||
| 113 | #define INTE_GPI 0x00000080 /* General Purpose input changed */ | ||
| 114 | #define INTE_SRC_LOCKED 0x00000040 /* SRC lock status changed */ | ||
| 115 | #define INTE_SPDIF_STATUS 0x00000020 /* SPDIF status changed */ | ||
| 116 | #define INTE_TIMER2 0x00000010 /* 192000Hz Timer */ | ||
| 117 | #define INTE_TIMER1 0x00000008 /* 44100Hz Timer */ | ||
| 118 | #define INTE_MIDI_RX_A 0x00000004 /* MIDI UART-A Receive buffer non-empty */ | ||
| 119 | #define INTE_MIDI_TX_A 0x00000002 /* MIDI UART-A Transmit buffer empty */ | ||
| 120 | #define INTE_PCI 0x00000001 /* PCI Bus error */ | ||
| 121 | |||
| 122 | #define UNKNOWN10 0x10 /* Unknown ??. Defaults to 0 */ | ||
| 123 | #define HCFG 0x14 /* Hardware config register */ | ||
| 124 | /* 0x1000 causes AC3 to fails. It adds a dither bit. */ | ||
| 125 | |||
| 126 | #define HCFG_STAC 0x10000000 /* Special mode for STAC9460 Codec. */ | ||
| 127 | #define HCFG_CAPTURE_I2S_BYPASS 0x08000000 /* 1 = bypass I2S input async SRC. */ | ||
| 128 | #define HCFG_CAPTURE_SPDIF_BYPASS 0x04000000 /* 1 = bypass SPDIF input async SRC. */ | ||
| 129 | #define HCFG_PLAYBACK_I2S_BYPASS 0x02000000 /* 0 = I2S IN mixer output, 1 = I2S IN1. */ | ||
| 130 | #define HCFG_FORCE_LOCK 0x01000000 /* For test only. Force input SRC tracker to lock. */ | ||
| 131 | #define HCFG_PLAYBACK_ATTENUATION 0x00006000 /* Playback attenuation mask. 0 = 0dB, 1 = 6dB, 2 = 12dB, 3 = Mute. */ | ||
| 132 | #define HCFG_PLAYBACK_DITHER 0x00001000 /* 1 = Add dither bit to all playback channels. */ | ||
| 133 | #define HCFG_PLAYBACK_S32_LE 0x00000800 /* 1 = S32_LE, 0 = S16_LE */ | ||
| 134 | #define HCFG_CAPTURE_S32_LE 0x00000400 /* 1 = S32_LE, 0 = S16_LE (S32_LE current not working) */ | ||
| 135 | #define HCFG_8_CHANNEL_PLAY 0x00000200 /* 1 = 8 channels, 0 = 2 channels per substream.*/ | ||
| 136 | #define HCFG_8_CHANNEL_CAPTURE 0x00000100 /* 1 = 8 channels, 0 = 2 channels per substream.*/ | ||
| 137 | #define HCFG_MONO 0x00000080 /* 1 = I2S Input mono */ | ||
| 138 | #define HCFG_I2S_OUTPUT 0x00000010 /* 1 = I2S Output disabled */ | ||
| 139 | #define HCFG_AC97 0x00000008 /* 0 = AC97 1.0, 1 = AC97 2.0 */ | ||
| 140 | #define HCFG_LOCK_PLAYBACK_CACHE 0x00000004 /* 1 = Cancel bustmaster accesses to soundcache */ | ||
| 141 | /* NOTE: This should generally never be used. */ | ||
| 142 | #define HCFG_LOCK_CAPTURE_CACHE 0x00000002 /* 1 = Cancel bustmaster accesses to soundcache */ | ||
| 143 | /* NOTE: This should generally never be used. */ | ||
| 144 | #define HCFG_AUDIOENABLE 0x00000001 /* 0 = CODECs transmit zero-valued samples */ | ||
| 145 | /* Should be set to 1 when the EMU10K1 is */ | ||
| 146 | /* completely initialized. */ | ||
| 147 | #define GPIO 0x18 /* Defaults: 005f03a3-Analog, 005f02a2-SPDIF. */ | ||
| 148 | /* Here pins 0,1,2,3,4,,6 are output. 5,7 are input */ | ||
| 149 | /* For the Audigy LS, pin 0 (or bit 8) controls the SPDIF/Analog jack. */ | ||
| 150 | /* SB Live 24bit: | ||
| 151 | * bit 8 0 = SPDIF in and out / 1 = Analog (Mic or Line)-in. | ||
| 152 | * bit 9 0 = Mute / 1 = Analog out. | ||
| 153 | * bit 10 0 = Line-in / 1 = Mic-in. | ||
| 154 | * bit 11 0 = ? / 1 = ? | ||
| 155 | * bit 12 0 = ? / 1 = ? | ||
| 156 | * bit 13 0 = ? / 1 = ? | ||
| 157 | * bit 14 0 = Mute / 1 = Analog out | ||
| 158 | * bit 15 0 = ? / 1 = ? | ||
| 159 | * Both bit 9 and bit 14 have to be set for analog sound to work on the SB Live 24bit. | ||
| 160 | */ | ||
| 161 | /* 8 general purpose programmable In/Out pins. | ||
| 162 | * GPI [8:0] Read only. Default 0. | ||
| 163 | * GPO [15:8] Default 0x9. (Default to SPDIF jack enabled for SPDIF) | ||
| 164 | * GPO Enable [23:16] Default 0x0f. Setting a bit to 1, causes the pin to be an output pin. | ||
| 165 | */ | ||
| 166 | #define AC97DATA 0x1c /* AC97 register set data register (16 bit) */ | ||
| 167 | |||
| 168 | #define AC97ADDRESS 0x1e /* AC97 register set address register (8 bit) */ | ||
| 169 | |||
| 170 | /********************************************************************************************************/ | ||
| 171 | /* CA0106 pointer-offset register set, accessed through the PTR and DATA registers */ | ||
| 172 | /********************************************************************************************************/ | ||
| 173 | |||
| 174 | /* Initally all registers from 0x00 to 0x3f have zero contents. */ | ||
| 175 | #define PLAYBACK_LIST_ADDR 0x00 /* Base DMA address of a list of pointers to each period/size */ | ||
| 176 | /* One list entry: 4 bytes for DMA address, | ||
| 177 | * 4 bytes for period_size << 16. | ||
| 178 | * One list entry is 8 bytes long. | ||
| 179 | * One list entry for each period in the buffer. | ||
| 180 | */ | ||
| 181 | /* ADDR[31:0], Default: 0x0 */ | ||
| 182 | #define PLAYBACK_LIST_SIZE 0x01 /* Size of list in bytes << 16. E.g. 8 periods -> 0x00380000 */ | ||
| 183 | /* SIZE[21:16], Default: 0x8 */ | ||
| 184 | #define PLAYBACK_LIST_PTR 0x02 /* Pointer to the current period being played */ | ||
| 185 | /* PTR[5:0], Default: 0x0 */ | ||
| 186 | #define PLAYBACK_UNKNOWN3 0x03 /* Not used ?? */ | ||
| 187 | #define PLAYBACK_DMA_ADDR 0x04 /* Playback DMA addresss */ | ||
| 188 | /* DMA[31:0], Default: 0x0 */ | ||
| 189 | #define PLAYBACK_PERIOD_SIZE 0x05 /* Playback period size. win2000 uses 0x04000000 */ | ||
| 190 | /* SIZE[31:16], Default: 0x0 */ | ||
| 191 | #define PLAYBACK_POINTER 0x06 /* Playback period pointer. Used with PLAYBACK_LIST_PTR to determine buffer position currently in DAC */ | ||
| 192 | /* POINTER[15:0], Default: 0x0 */ | ||
| 193 | #define PLAYBACK_PERIOD_END_ADDR 0x07 /* Playback fifo end address */ | ||
| 194 | /* END_ADDR[15:0], FLAG[16] 0 = don't stop, 1 = stop */ | ||
| 195 | #define PLAYBACK_FIFO_OFFSET_ADDRESS 0x08 /* Current fifo offset address [21:16] */ | ||
| 196 | /* Cache size valid [5:0] */ | ||
| 197 | #define PLAYBACK_UNKNOWN9 0x09 /* 0x9 to 0xf Unused */ | ||
| 198 | #define CAPTURE_DMA_ADDR 0x10 /* Capture DMA address */ | ||
| 199 | /* DMA[31:0], Default: 0x0 */ | ||
| 200 | #define CAPTURE_BUFFER_SIZE 0x11 /* Capture buffer size */ | ||
| 201 | /* SIZE[31:16], Default: 0x0 */ | ||
| 202 | #define CAPTURE_POINTER 0x12 /* Capture buffer pointer. Sample currently in ADC */ | ||
| 203 | /* POINTER[15:0], Default: 0x0 */ | ||
| 204 | #define CAPTURE_FIFO_OFFSET_ADDRESS 0x13 /* Current fifo offset address [21:16] */ | ||
| 205 | /* Cache size valid [5:0] */ | ||
| 206 | #define PLAYBACK_LAST_SAMPLE 0x20 /* The sample currently being played */ | ||
| 207 | /* 0x21 - 0x3f unused */ | ||
| 208 | #define BASIC_INTERRUPT 0x40 /* Used by both playback and capture interrupt handler */ | ||
| 209 | /* Playback (0x1<<channel_id) */ | ||
| 210 | /* Capture (0x100<<channel_id) */ | ||
| 211 | /* Playback sample rate 96000 = 0x20000 */ | ||
| 212 | /* Start Playback [3:0] (one bit per channel) | ||
| 213 | * Start Capture [11:8] (one bit per channel) | ||
| 214 | * Playback rate [23:16] (2 bits per channel) (0=48kHz, 1=44.1kHz, 2=96kHz, 3=192Khz) | ||
| 215 | * Playback mixer in enable [27:24] (one bit per channel) | ||
| 216 | * Playback mixer out enable [31:28] (one bit per channel) | ||
| 217 | */ | ||
| 218 | /* The Digital out jack is shared with the Center/LFE Analogue output. | ||
| 219 | * The jack has 4 poles. I will call 1 - Tip, 2 - Next to 1, 3 - Next to 2, 4 - Next to 3 | ||
| 220 | * For Analogue: 1 -> Center Speaker, 2 -> Sub Woofer, 3 -> Ground, 4 -> Ground | ||
| 221 | * For Digital: 1 -> Front SPDIF, 2 -> Rear SPDIF, 3 -> Center/Subwoofer SPDIF, 4 -> Ground. | ||
| 222 | * Standard 4 pole Video A/V cable with RCA outputs: 1 -> White, 2 -> Yellow, 3 -> Sheild on all three, 4 -> Red. | ||
| 223 | * So, from this you can see that you cannot use a Standard 4 pole Video A/V cable with the SB Audigy LS card. | ||
| 224 | */ | ||
| 225 | /* The Front SPDIF PCM gets mixed with samples from the AC97 codec, so can only work for Stereo PCM and not AC3/DTS | ||
| 226 | * The Rear SPDIF can be used for Stereo PCM and also AC3/DTS | ||
| 227 | * The Center/LFE SPDIF cannot be used for AC3/DTS, but can be used for Stereo PCM. | ||
| 228 | * Summary: For ALSA we use the Rear channel for SPDIF Digital AC3/DTS output | ||
| 229 | */ | ||
| 230 | /* A standard 2 pole mono mini-jack to RCA plug can be used for SPDIF Stereo PCM output from the Front channel. | ||
| 231 | * A standard 3 pole stereo mini-jack to 2 RCA plugs can be used for SPDIF AC3/DTS and Stereo PCM output utilising the Rear channel and just one of the RCA plugs. | ||
| 232 | */ | ||
| 233 | #define SPCS0 0x41 /* SPDIF output Channel Status 0 register. For Rear. default=0x02108004, non-audio=0x02108006 */ | ||
| 234 | #define SPCS1 0x42 /* SPDIF output Channel Status 1 register. For Front */ | ||
| 235 | #define SPCS2 0x43 /* SPDIF output Channel Status 2 register. For Center/LFE */ | ||
| 236 | #define SPCS3 0x44 /* SPDIF output Channel Status 3 register. Unknown */ | ||
| 237 | /* When Channel set to 0: */ | ||
| 238 | #define SPCS_CLKACCYMASK 0x30000000 /* Clock accuracy */ | ||
| 239 | #define SPCS_CLKACCY_1000PPM 0x00000000 /* 1000 parts per million */ | ||
| 240 | #define SPCS_CLKACCY_50PPM 0x10000000 /* 50 parts per million */ | ||
| 241 | #define SPCS_CLKACCY_VARIABLE 0x20000000 /* Variable accuracy */ | ||
| 242 | #define SPCS_SAMPLERATEMASK 0x0f000000 /* Sample rate */ | ||
| 243 | #define SPCS_SAMPLERATE_44 0x00000000 /* 44.1kHz sample rate */ | ||
| 244 | #define SPCS_SAMPLERATE_48 0x02000000 /* 48kHz sample rate */ | ||
| 245 | #define SPCS_SAMPLERATE_32 0x03000000 /* 32kHz sample rate */ | ||
| 246 | #define SPCS_CHANNELNUMMASK 0x00f00000 /* Channel number */ | ||
| 247 | #define SPCS_CHANNELNUM_UNSPEC 0x00000000 /* Unspecified channel number */ | ||
| 248 | #define SPCS_CHANNELNUM_LEFT 0x00100000 /* Left channel */ | ||
| 249 | #define SPCS_CHANNELNUM_RIGHT 0x00200000 /* Right channel */ | ||
| 250 | #define SPCS_SOURCENUMMASK 0x000f0000 /* Source number */ | ||
| 251 | #define SPCS_SOURCENUM_UNSPEC 0x00000000 /* Unspecified source number */ | ||
| 252 | #define SPCS_GENERATIONSTATUS 0x00008000 /* Originality flag (see IEC-958 spec) */ | ||
| 253 | #define SPCS_CATEGORYCODEMASK 0x00007f00 /* Category code (see IEC-958 spec) */ | ||
| 254 | #define SPCS_MODEMASK 0x000000c0 /* Mode (see IEC-958 spec) */ | ||
| 255 | #define SPCS_EMPHASISMASK 0x00000038 /* Emphasis */ | ||
| 256 | #define SPCS_EMPHASIS_NONE 0x00000000 /* No emphasis */ | ||
| 257 | #define SPCS_EMPHASIS_50_15 0x00000008 /* 50/15 usec 2 channel */ | ||
| 258 | #define SPCS_COPYRIGHT 0x00000004 /* Copyright asserted flag -- do not modify */ | ||
| 259 | #define SPCS_NOTAUDIODATA 0x00000002 /* 0 = Digital audio, 1 = not audio */ | ||
| 260 | #define SPCS_PROFESSIONAL 0x00000001 /* 0 = Consumer (IEC-958), 1 = pro (AES3-1992) */ | ||
| 261 | |||
| 262 | /* When Channel set to 1: */ | ||
| 263 | #define SPCS_WORD_LENGTH_MASK 0x0000000f /* Word Length Mask */ | ||
| 264 | #define SPCS_WORD_LENGTH_16 0x00000008 /* Word Length 16 bit */ | ||
| 265 | #define SPCS_WORD_LENGTH_17 0x00000006 /* Word Length 17 bit */ | ||
| 266 | #define SPCS_WORD_LENGTH_18 0x00000004 /* Word Length 18 bit */ | ||
| 267 | #define SPCS_WORD_LENGTH_19 0x00000002 /* Word Length 19 bit */ | ||
| 268 | #define SPCS_WORD_LENGTH_20A 0x0000000a /* Word Length 20 bit */ | ||
| 269 | #define SPCS_WORD_LENGTH_20 0x00000009 /* Word Length 20 bit (both 0xa and 0x9 are 20 bit) */ | ||
| 270 | #define SPCS_WORD_LENGTH_21 0x00000007 /* Word Length 21 bit */ | ||
| 271 | #define SPCS_WORD_LENGTH_21 0x00000007 /* Word Length 21 bit */ | ||
| 272 | #define SPCS_WORD_LENGTH_22 0x00000005 /* Word Length 22 bit */ | ||
| 273 | #define SPCS_WORD_LENGTH_23 0x00000003 /* Word Length 23 bit */ | ||
| 274 | #define SPCS_WORD_LENGTH_24 0x0000000b /* Word Length 24 bit */ | ||
| 275 | #define SPCS_ORIGINAL_SAMPLE_RATE_MASK 0x000000f0 /* Original Sample rate */ | ||
| 276 | #define SPCS_ORIGINAL_SAMPLE_RATE_NONE 0x00000000 /* Original Sample rate not indicated */ | ||
| 277 | #define SPCS_ORIGINAL_SAMPLE_RATE_16000 0x00000010 /* Original Sample rate */ | ||
| 278 | #define SPCS_ORIGINAL_SAMPLE_RATE_RES1 0x00000020 /* Original Sample rate */ | ||
| 279 | #define SPCS_ORIGINAL_SAMPLE_RATE_32000 0x00000030 /* Original Sample rate */ | ||
| 280 | #define SPCS_ORIGINAL_SAMPLE_RATE_12000 0x00000040 /* Original Sample rate */ | ||
| 281 | #define SPCS_ORIGINAL_SAMPLE_RATE_11025 0x00000050 /* Original Sample rate */ | ||
| 282 | #define SPCS_ORIGINAL_SAMPLE_RATE_8000 0x00000060 /* Original Sample rate */ | ||
| 283 | #define SPCS_ORIGINAL_SAMPLE_RATE_RES2 0x00000070 /* Original Sample rate */ | ||
| 284 | #define SPCS_ORIGINAL_SAMPLE_RATE_192000 0x00000080 /* Original Sample rate */ | ||
| 285 | #define SPCS_ORIGINAL_SAMPLE_RATE_24000 0x00000090 /* Original Sample rate */ | ||
| 286 | #define SPCS_ORIGINAL_SAMPLE_RATE_96000 0x000000a0 /* Original Sample rate */ | ||
| 287 | #define SPCS_ORIGINAL_SAMPLE_RATE_48000 0x000000b0 /* Original Sample rate */ | ||
| 288 | #define SPCS_ORIGINAL_SAMPLE_RATE_176400 0x000000c0 /* Original Sample rate */ | ||
| 289 | #define SPCS_ORIGINAL_SAMPLE_RATE_22050 0x000000d0 /* Original Sample rate */ | ||
| 290 | #define SPCS_ORIGINAL_SAMPLE_RATE_88200 0x000000e0 /* Original Sample rate */ | ||
| 291 | #define SPCS_ORIGINAL_SAMPLE_RATE_44100 0x000000f0 /* Original Sample rate */ | ||
| 292 | |||
| 293 | #define SPDIF_SELECT1 0x45 /* Enables SPDIF or Analogue outputs 0-SPDIF, 0xf00-Analogue */ | ||
| 294 | /* 0x100 - Front, 0x800 - Rear, 0x200 - Center/LFE. | ||
| 295 | * But as the jack is shared, use 0xf00. | ||
| 296 | * The Windows2000 driver uses 0x0000000f for both digital and analog. | ||
| 297 | * 0xf00 introduces interesting noises onto the Center/LFE. | ||
| 298 | * If you turn the volume up, you hear computer noise, | ||
| 299 | * e.g. mouse moving, changing between app windows etc. | ||
| 300 | * So, I am going to set this to 0x0000000f all the time now, | ||
| 301 | * same as the windows driver does. | ||
| 302 | * Use register SPDIF_SELECT2(0x72) to switch between SPDIF and Analog. | ||
| 303 | */ | ||
| 304 | /* When Channel = 0: | ||
| 305 | * Wide SPDIF format [3:0] (one bit for each channel) (0=20bit, 1=24bit) | ||
| 306 | * Tristate SPDIF Output [11:8] (one bit for each channel) (0=Not tristate, 1=Tristate) | ||
| 307 | * SPDIF Bypass enable [19:16] (one bit for each channel) (0=Not bypass, 1=Bypass) | ||
| 308 | */ | ||
| 309 | /* When Channel = 1: | ||
| 310 | * SPDIF 0 User data [7:0] | ||
| 311 | * SPDIF 1 User data [15:8] | ||
| 312 | * SPDIF 0 User data [23:16] | ||
| 313 | * SPDIF 0 User data [31:24] | ||
| 314 | * User data can be sent by using the SPDIF output frame pending and SPDIF output user bit interrupts. | ||
| 315 | */ | ||
| 316 | #define WATERMARK 0x46 /* Test bit to indicate cache usage level */ | ||
| 317 | #define SPDIF_INPUT_STATUS 0x49 /* SPDIF Input status register. Bits the same as SPCS. | ||
| 318 | * When Channel = 0: Bits the same as SPCS channel 0. | ||
| 319 | * When Channel = 1: Bits the same as SPCS channel 1. | ||
| 320 | * When Channel = 2: | ||
| 321 | * SPDIF Input User data [16:0] | ||
| 322 | * SPDIF Input Frame count [21:16] | ||
| 323 | */ | ||
| 324 | #define CAPTURE_CACHE_DATA 0x50 /* 0x50-0x5f Recorded samples. */ | ||
| 325 | #define CAPTURE_SOURCE 0x60 /* Capture Source 0 = MIC */ | ||
| 326 | #define CAPTURE_SOURCE_CHANNEL0 0xf0000000 /* Mask for selecting the Capture sources */ | ||
| 327 | #define CAPTURE_SOURCE_CHANNEL1 0x0f000000 /* 0 - SPDIF mixer output. */ | ||
| 328 | #define CAPTURE_SOURCE_CHANNEL2 0x00f00000 /* 1 - What you hear or . 2 - ?? */ | ||
| 329 | #define CAPTURE_SOURCE_CHANNEL3 0x000f0000 /* 3 - Mic in, Line in, TAD in, Aux in. */ | ||
| 330 | #define CAPTURE_SOURCE_RECORD_MAP 0x0000ffff /* Default 0x00e4 */ | ||
| 331 | /* Record Map [7:0] (2 bits per channel) 0=mapped to channel 0, 1=mapped to channel 1, 2=mapped to channel2, 3=mapped to channel3 | ||
| 332 | * Record source select for channel 0 [18:16] | ||
| 333 | * Record source select for channel 1 [22:20] | ||
| 334 | * Record source select for channel 2 [26:24] | ||
| 335 | * Record source select for channel 3 [30:28] | ||
| 336 | * 0 - SPDIF mixer output. | ||
| 337 | * 1 - i2s mixer output. | ||
| 338 | * 2 - SPDIF input. | ||
| 339 | * 3 - i2s input. | ||
| 340 | * 4 - AC97 capture. | ||
| 341 | * 5 - SRC output. | ||
| 342 | */ | ||
| 343 | #define CAPTURE_VOLUME1 0x61 /* Capture volume per channel 0-3 */ | ||
| 344 | #define CAPTURE_VOLUME2 0x62 /* Capture volume per channel 4-7 */ | ||
| 345 | |||
| 346 | #define PLAYBACK_ROUTING1 0x63 /* Playback routing of channels 0-7. Effects AC3 output. Default 0x32765410 */ | ||
| 347 | #define ROUTING1_REAR 0x77000000 /* Channel_id 0 sends to 10, Channel_id 1 sends to 32 */ | ||
| 348 | #define ROUTING1_NULL 0x00770000 /* Channel_id 2 sends to 54, Channel_id 3 sends to 76 */ | ||
| 349 | #define ROUTING1_CENTER_LFE 0x00007700 /* 0x32765410 means, send Channel_id 0 to FRONT, Channel_id 1 to REAR */ | ||
| 350 | #define ROUTING1_FRONT 0x00000077 /* Channel_id 2 to CENTER_LFE, Channel_id 3 to NULL. */ | ||
| 351 | /* Channel_id's handle stereo channels. Channel X is a single mono channel */ | ||
| 352 | /* Host is input from the PCI bus. */ | ||
| 353 | /* Host channel 0 [2:0] -> SPDIF Mixer/Router channel 0-7. | ||
| 354 | * Host channel 1 [6:4] -> SPDIF Mixer/Router channel 0-7. | ||
| 355 | * Host channel 2 [10:8] -> SPDIF Mixer/Router channel 0-7. | ||
| 356 | * Host channel 3 [14:12] -> SPDIF Mixer/Router channel 0-7. | ||
| 357 | * Host channel 4 [18:16] -> SPDIF Mixer/Router channel 0-7. | ||
| 358 | * Host channel 5 [22:20] -> SPDIF Mixer/Router channel 0-7. | ||
| 359 | * Host channel 6 [26:24] -> SPDIF Mixer/Router channel 0-7. | ||
| 360 | * Host channel 7 [30:28] -> SPDIF Mixer/Router channel 0-7. | ||
| 361 | */ | ||
| 362 | |||
| 363 | #define PLAYBACK_ROUTING2 0x64 /* Playback Routing . Feeding Capture channels back into Playback. Effects AC3 output. Default 0x76767676 */ | ||
| 364 | /* SRC is input from the capture inputs. */ | ||
| 365 | /* SRC channel 0 [2:0] -> SPDIF Mixer/Router channel 0-7. | ||
| 366 | * SRC channel 1 [6:4] -> SPDIF Mixer/Router channel 0-7. | ||
| 367 | * SRC channel 2 [10:8] -> SPDIF Mixer/Router channel 0-7. | ||
| 368 | * SRC channel 3 [14:12] -> SPDIF Mixer/Router channel 0-7. | ||
| 369 | * SRC channel 4 [18:16] -> SPDIF Mixer/Router channel 0-7. | ||
| 370 | * SRC channel 5 [22:20] -> SPDIF Mixer/Router channel 0-7. | ||
| 371 | * SRC channel 6 [26:24] -> SPDIF Mixer/Router channel 0-7. | ||
| 372 | * SRC channel 7 [30:28] -> SPDIF Mixer/Router channel 0-7. | ||
| 373 | */ | ||
| 374 | |||
| 375 | #define PLAYBACK_MUTE 0x65 /* Unknown. While playing 0x0, while silent 0x00fc0000 */ | ||
| 376 | /* SPDIF Mixer input control: | ||
| 377 | * Invert SRC to SPDIF Mixer [7-0] (One bit per channel) | ||
| 378 | * Invert Host to SPDIF Mixer [15:8] (One bit per channel) | ||
| 379 | * SRC to SPDIF Mixer disable [23:16] (One bit per channel) | ||
| 380 | * Host to SPDIF Mixer disable [31:24] (One bit per channel) | ||
| 381 | */ | ||
| 382 | #define PLAYBACK_VOLUME1 0x66 /* Playback SPDIF volume per channel. Set to the same PLAYBACK_VOLUME(0x6a) */ | ||
| 383 | /* PLAYBACK_VOLUME1 must be set to 30303030 for SPDIF AC3 Playback */ | ||
| 384 | /* SPDIF mixer input volume. 0=12dB, 0x30=0dB, 0xFE=-51.5dB, 0xff=Mute */ | ||
| 385 | /* One register for each of the 4 stereo streams. */ | ||
| 386 | /* SRC Right volume [7:0] | ||
| 387 | * SRC Left volume [15:8] | ||
| 388 | * Host Right volume [23:16] | ||
| 389 | * Host Left volume [31:24] | ||
| 390 | */ | ||
| 391 | #define CAPTURE_ROUTING1 0x67 /* Capture Routing. Default 0x32765410 */ | ||
| 392 | /* Similar to register 0x63, except that the destination is the I2S mixer instead of the SPDIF mixer. I.E. Outputs to the Analog outputs instead of SPDIF. */ | ||
| 393 | #define CAPTURE_ROUTING2 0x68 /* Unknown Routing. Default 0x76767676 */ | ||
| 394 | /* Similar to register 0x64, except that the destination is the I2S mixer instead of the SPDIF mixer. I.E. Outputs to the Analog outputs instead of SPDIF. */ | ||
| 395 | #define CAPTURE_MUTE 0x69 /* Unknown. While capturing 0x0, while silent 0x00fc0000 */ | ||
| 396 | /* Similar to register 0x65, except that the destination is the I2S mixer instead of the SPDIF mixer. I.E. Outputs to the Analog outputs instead of SPDIF. */ | ||
| 397 | #define PLAYBACK_VOLUME2 0x6a /* Playback Analog volume per channel. Does not effect AC3 output */ | ||
| 398 | /* Similar to register 0x66, except that the destination is the I2S mixer instead of the SPDIF mixer. I.E. Outputs to the Analog outputs instead of SPDIF. */ | ||
| 399 | #define UNKNOWN6b 0x6b /* Unknown. Readonly. Default 00400000 00400000 00400000 00400000 */ | ||
| 400 | #define UART_A_DATA 0x6c /* Uart, used in setting sample rates, bits per sample etc. */ | ||
| 401 | #define UART_A_CMD 0x6d /* Uart, used in setting sample rates, bits per sample etc. */ | ||
| 402 | #define UART_B_DATA 0x6e /* Uart, Unknown. */ | ||
| 403 | #define UART_B_CMD 0x6f /* Uart, Unknown. */ | ||
| 404 | #define SAMPLE_RATE_TRACKER_STATUS 0x70 /* Readonly. Default 00108000 00108000 00500000 00500000 */ | ||
| 405 | /* Estimated sample rate [19:0] Relative to 48kHz. 0x8000 = 1.0 | ||
| 406 | * Rate Locked [20] | ||
| 407 | * SPDIF Locked [21] For SPDIF channel only. | ||
| 408 | * Valid Audio [22] For SPDIF channel only. | ||
| 409 | */ | ||
| 410 | #define CAPTURE_CONTROL 0x71 /* Some sort of routing. default = 40c81000 30303030 30300000 00700000 */ | ||
| 411 | /* Channel_id 0: 0x40c81000 must be changed to 0x40c80000 for SPDIF AC3 input or output. */ | ||
| 412 | /* Channel_id 1: 0xffffffff(mute) 0x30303030(max) controls CAPTURE feedback into PLAYBACK. */ | ||
| 413 | /* Sample rate output control register Channel=0 | ||
| 414 | * Sample output rate [1:0] (0=48kHz, 1=44.1kHz, 2=96kHz, 3=192Khz) | ||
| 415 | * Sample input rate [3:2] (0=48kHz, 1=Not available, 2=96kHz, 3=192Khz) | ||
| 416 | * SRC input source select [4] 0=Audio from digital mixer, 1=Audio from analog source. | ||
| 417 | * Record rate [9:8] (0=48kHz, 1=Not available, 2=96kHz, 3=192Khz) | ||
| 418 | * Record mixer output enable [12:10] | ||
| 419 | * I2S input rate master mode [15:14] (0=48kHz, 1=44.1kHz, 2=96kHz, 3=192Khz) | ||
| 420 | * I2S output rate [17:16] (0=48kHz, 1=44.1kHz, 2=96kHz, 3=192Khz) | ||
| 421 | * I2S output source select [18] (0=Audio from host, 1=Audio from SRC) | ||
| 422 | * Record mixer I2S enable [20:19] (enable/disable i2sin1 and i2sin0) | ||
| 423 | * I2S output master clock select [21] (0=256*I2S output rate, 1=512*I2S output rate.) | ||
| 424 | * I2S input master clock select [22] (0=256*I2S input rate, 1=512*I2S input rate.) | ||
| 425 | * I2S input mode [23] (0=Slave, 1=Master) | ||
| 426 | * SPDIF output rate [25:24] (0=48kHz, 1=44.1kHz, 2=96kHz, 3=192Khz) | ||
| 427 | * SPDIF output source select [26] (0=host, 1=SRC) | ||
| 428 | * Not used [27] | ||
| 429 | * Record Source 0 input [29:28] (0=SPDIF in, 1=I2S in, 2=AC97 Mic, 3=AC97 PCM) | ||
| 430 | * Record Source 1 input [31:30] (0=SPDIF in, 1=I2S in, 2=AC97 Mic, 3=AC97 PCM) | ||
| 431 | */ | ||
| 432 | /* Sample rate output control register Channel=1 | ||
| 433 | * I2S Input 0 volume Right [7:0] | ||
| 434 | * I2S Input 0 volume Left [15:8] | ||
| 435 | * I2S Input 1 volume Right [23:16] | ||
| 436 | * I2S Input 1 volume Left [31:24] | ||
| 437 | */ | ||
| 438 | /* Sample rate output control register Channel=2 | ||
| 439 | * SPDIF Input volume Right [23:16] | ||
| 440 | * SPDIF Input volume Left [31:24] | ||
| 441 | */ | ||
| 442 | /* Sample rate output control register Channel=3 | ||
| 443 | * No used | ||
| 444 | */ | ||
| 445 | #define SPDIF_SELECT2 0x72 /* Some sort of routing. Channel_id 0 only. default = 0x0f0f003f. Analog 0x000b0000, Digital 0x0b000000 */ | ||
| 446 | #define ROUTING2_FRONT_MASK 0x00010000 /* Enable for Front speakers. */ | ||
| 447 | #define ROUTING2_CENTER_LFE_MASK 0x00020000 /* Enable for Center/LFE speakers. */ | ||
| 448 | #define ROUTING2_REAR_MASK 0x00080000 /* Enable for Rear speakers. */ | ||
| 449 | /* Audio output control | ||
| 450 | * AC97 output enable [5:0] | ||
| 451 | * I2S output enable [19:16] | ||
| 452 | * SPDIF output enable [27:24] | ||
| 453 | */ | ||
| 454 | #define UNKNOWN73 0x73 /* Unknown. Readonly. Default 0x0 */ | ||
| 455 | #define CHIP_VERSION 0x74 /* P17 Chip version. Channel_id 0 only. Default 00000071 */ | ||
| 456 | #define EXTENDED_INT_MASK 0x75 /* Used by both playback and capture interrupt handler */ | ||
| 457 | /* Sets which Interrupts are enabled. */ | ||
| 458 | /* 0x00000001 = Half period. Playback. | ||
| 459 | * 0x00000010 = Full period. Playback. | ||
| 460 | * 0x00000100 = Half buffer. Playback. | ||
| 461 | * 0x00001000 = Full buffer. Playback. | ||
| 462 | * 0x00010000 = Half buffer. Capture. | ||
| 463 | * 0x00100000 = Full buffer. Capture. | ||
| 464 | * Capture can only do 2 periods. | ||
| 465 | * 0x01000000 = End audio. Playback. | ||
| 466 | * 0x40000000 = Half buffer Playback,Caputre xrun. | ||
| 467 | * 0x80000000 = Full buffer Playback,Caputre xrun. | ||
| 468 | */ | ||
| 469 | #define EXTENDED_INT 0x76 /* Used by both playback and capture interrupt handler */ | ||
| 470 | /* Shows which interrupts are active at the moment. */ | ||
| 471 | /* Same bit layout as EXTENDED_INT_MASK */ | ||
| 472 | #define COUNTER77 0x77 /* Counter range 0 to 0x3fffff, 192000 counts per second. */ | ||
| 473 | #define COUNTER78 0x78 /* Counter range 0 to 0x3fffff, 44100 counts per second. */ | ||
| 474 | #define EXTENDED_INT_TIMER 0x79 /* Channel_id 0 only. Used by both playback and capture interrupt handler */ | ||
| 475 | /* Causes interrupts based on timer intervals. */ | ||
| 476 | #define SPI 0x7a /* SPI: Serial Interface Register */ | ||
| 477 | #define I2C_A 0x7b /* I2C Address. 32 bit */ | ||
| 478 | #define I2C_0 0x7c /* I2C Data Port 0. 32 bit */ | ||
| 479 | #define I2C_1 0x7d /* I2C Data Port 1. 32 bit */ | ||
| 480 | |||
| 481 | |||
| 482 | #define SET_CHANNEL 0 /* Testing channel outputs 0=Front, 1=Center/LFE, 2=Unknown, 3=Rear */ | ||
| 483 | #define PCM_FRONT_CHANNEL 0 | ||
| 484 | #define PCM_REAR_CHANNEL 1 | ||
| 485 | #define PCM_CENTER_LFE_CHANNEL 2 | ||
| 486 | #define PCM_UNKNOWN_CHANNEL 3 | ||
| 487 | #define CONTROL_FRONT_CHANNEL 0 | ||
| 488 | #define CONTROL_REAR_CHANNEL 3 | ||
| 489 | #define CONTROL_CENTER_LFE_CHANNEL 1 | ||
| 490 | #define CONTROL_UNKNOWN_CHANNEL 2 | ||
| 491 | |||
| 492 | typedef struct snd_ca0106_channel ca0106_channel_t; | ||
| 493 | typedef struct snd_ca0106 ca0106_t; | ||
| 494 | typedef struct snd_ca0106_pcm ca0106_pcm_t; | ||
| 495 | |||
| 496 | struct snd_ca0106_channel { | ||
| 497 | ca0106_t *emu; | ||
| 498 | int number; | ||
| 499 | int use; | ||
| 500 | void (*interrupt)(ca0106_t *emu, ca0106_channel_t *channel); | ||
| 501 | ca0106_pcm_t *epcm; | ||
| 502 | }; | ||
| 503 | |||
| 504 | struct snd_ca0106_pcm { | ||
| 505 | ca0106_t *emu; | ||
| 506 | snd_pcm_substream_t *substream; | ||
| 507 | int channel_id; | ||
| 508 | unsigned short running; | ||
| 509 | }; | ||
| 510 | |||
| 511 | // definition of the chip-specific record | ||
| 512 | struct snd_ca0106 { | ||
| 513 | snd_card_t *card; | ||
| 514 | struct pci_dev *pci; | ||
| 515 | |||
| 516 | unsigned long port; | ||
| 517 | struct resource *res_port; | ||
| 518 | int irq; | ||
| 519 | |||
| 520 | unsigned int revision; /* chip revision */ | ||
| 521 | unsigned int serial; /* serial number */ | ||
| 522 | unsigned short model; /* subsystem id */ | ||
| 523 | |||
| 524 | spinlock_t emu_lock; | ||
| 525 | |||
| 526 | ac97_t *ac97; | ||
| 527 | snd_pcm_t *pcm; | ||
| 528 | |||
| 529 | ca0106_channel_t playback_channels[4]; | ||
| 530 | ca0106_channel_t capture_channels[4]; | ||
| 531 | u32 spdif_bits[4]; /* s/pdif out setup */ | ||
| 532 | int spdif_enable; | ||
| 533 | int capture_source; | ||
| 534 | |||
| 535 | struct snd_dma_buffer buffer; | ||
| 536 | }; | ||
| 537 | |||
| 538 | int __devinit snd_ca0106_mixer(ca0106_t *emu); | ||
| 539 | int __devinit snd_ca0106_proc_init(ca0106_t * emu); | ||
| 540 | |||
| 541 | unsigned int snd_ca0106_ptr_read(ca0106_t * emu, | ||
| 542 | unsigned int reg, | ||
| 543 | unsigned int chn); | ||
| 544 | |||
| 545 | void snd_ca0106_ptr_write(ca0106_t *emu, | ||
| 546 | unsigned int reg, | ||
| 547 | unsigned int chn, | ||
| 548 | unsigned int data); | ||
| 549 | |||