diff options
Diffstat (limited to 'sound/oss')
-rw-r--r-- | sound/oss/Kconfig | 12 | ||||
-rw-r--r-- | sound/oss/Makefile | 1 | ||||
-rw-r--r-- | sound/oss/sscape.c | 1480 |
3 files changed, 0 insertions, 1493 deletions
diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig index bcf2a0698d54..135a2b77cc4a 100644 --- a/sound/oss/Kconfig +++ b/sound/oss/Kconfig | |||
@@ -287,18 +287,6 @@ config SOUND_DMAP | |||
287 | 287 | ||
288 | Say Y unless you have 16MB or more RAM or a PCI sound card. | 288 | Say Y unless you have 16MB or more RAM or a PCI sound card. |
289 | 289 | ||
290 | config SOUND_SSCAPE | ||
291 | tristate "Ensoniq SoundScape support" | ||
292 | help | ||
293 | Answer Y if you have a sound card based on the Ensoniq SoundScape | ||
294 | chipset. Such cards are being manufactured at least by Ensoniq, Spea | ||
295 | and Reveal (Reveal makes also other cards). | ||
296 | |||
297 | If you compile the driver into the kernel, you have to add | ||
298 | "sscape=<io>,<irq>,<dma>,<mpuio>,<mpuirq>" to the kernel command | ||
299 | line. | ||
300 | |||
301 | |||
302 | config SOUND_VMIDI | 290 | config SOUND_VMIDI |
303 | tristate "Loopback MIDI device support" | 291 | tristate "Loopback MIDI device support" |
304 | help | 292 | help |
diff --git a/sound/oss/Makefile b/sound/oss/Makefile index e0ae4d4d6a5c..567b8a74178a 100644 --- a/sound/oss/Makefile +++ b/sound/oss/Makefile | |||
@@ -13,7 +13,6 @@ obj-$(CONFIG_SOUND_SH_DAC_AUDIO) += sh_dac_audio.o | |||
13 | obj-$(CONFIG_SOUND_AEDSP16) += aedsp16.o | 13 | obj-$(CONFIG_SOUND_AEDSP16) += aedsp16.o |
14 | obj-$(CONFIG_SOUND_PSS) += pss.o ad1848.o mpu401.o | 14 | obj-$(CONFIG_SOUND_PSS) += pss.o ad1848.o mpu401.o |
15 | obj-$(CONFIG_SOUND_TRIX) += trix.o ad1848.o sb_lib.o uart401.o | 15 | obj-$(CONFIG_SOUND_TRIX) += trix.o ad1848.o sb_lib.o uart401.o |
16 | obj-$(CONFIG_SOUND_SSCAPE) += sscape.o ad1848.o mpu401.o | ||
17 | obj-$(CONFIG_SOUND_MSS) += ad1848.o | 16 | obj-$(CONFIG_SOUND_MSS) += ad1848.o |
18 | obj-$(CONFIG_SOUND_PAS) += pas2.o sb.o sb_lib.o uart401.o | 17 | obj-$(CONFIG_SOUND_PAS) += pas2.o sb.o sb_lib.o uart401.o |
19 | obj-$(CONFIG_SOUND_SB) += sb.o sb_lib.o uart401.o | 18 | obj-$(CONFIG_SOUND_SB) += sb.o sb_lib.o uart401.o |
diff --git a/sound/oss/sscape.c b/sound/oss/sscape.c deleted file mode 100644 index 30c36d1f35d7..000000000000 --- a/sound/oss/sscape.c +++ /dev/null | |||
@@ -1,1480 +0,0 @@ | |||
1 | /* | ||
2 | * sound/oss/sscape.c | ||
3 | * | ||
4 | * Low level driver for Ensoniq SoundScape | ||
5 | * | ||
6 | * | ||
7 | * Copyright (C) by Hannu Savolainen 1993-1997 | ||
8 | * | ||
9 | * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) | ||
10 | * Version 2 (June 1991). See the "COPYING" file distributed with this software | ||
11 | * for more info. | ||
12 | * | ||
13 | * | ||
14 | * Thomas Sailer : ioctl code reworked (vmalloc/vfree removed) | ||
15 | * Sergey Smitienko : ensoniq p'n'p support | ||
16 | * Christoph Hellwig : adapted to module_init/module_exit | ||
17 | * Bartlomiej Zolnierkiewicz : added __init to attach_sscape() | ||
18 | * Chris Rankin : Specify that this module owns the coprocessor | ||
19 | * Arnaldo C. de Melo : added missing restore_flags in sscape_pnp_upload_file | ||
20 | */ | ||
21 | |||
22 | #include <linux/init.h> | ||
23 | #include <linux/module.h> | ||
24 | |||
25 | #include "sound_config.h" | ||
26 | #include "sound_firmware.h" | ||
27 | |||
28 | #include <linux/types.h> | ||
29 | #include <linux/errno.h> | ||
30 | #include <linux/signal.h> | ||
31 | #include <linux/fcntl.h> | ||
32 | #include <linux/ctype.h> | ||
33 | #include <linux/stddef.h> | ||
34 | #include <linux/kmod.h> | ||
35 | #include <asm/dma.h> | ||
36 | #include <asm/io.h> | ||
37 | #include <linux/wait.h> | ||
38 | #include <linux/slab.h> | ||
39 | #include <linux/ioport.h> | ||
40 | #include <linux/delay.h> | ||
41 | #include <linux/proc_fs.h> | ||
42 | #include <linux/mm.h> | ||
43 | #include <linux/spinlock.h> | ||
44 | |||
45 | #include "coproc.h" | ||
46 | |||
47 | #include "ad1848.h" | ||
48 | #include "mpu401.h" | ||
49 | |||
50 | /* | ||
51 | * I/O ports | ||
52 | */ | ||
53 | #define MIDI_DATA 0 | ||
54 | #define MIDI_CTRL 1 | ||
55 | #define HOST_CTRL 2 | ||
56 | #define TX_READY 0x02 | ||
57 | #define RX_READY 0x01 | ||
58 | #define HOST_DATA 3 | ||
59 | #define ODIE_ADDR 4 | ||
60 | #define ODIE_DATA 5 | ||
61 | |||
62 | /* | ||
63 | * Indirect registers | ||
64 | */ | ||
65 | |||
66 | #define GA_INTSTAT_REG 0 | ||
67 | #define GA_INTENA_REG 1 | ||
68 | #define GA_DMAA_REG 2 | ||
69 | #define GA_DMAB_REG 3 | ||
70 | #define GA_INTCFG_REG 4 | ||
71 | #define GA_DMACFG_REG 5 | ||
72 | #define GA_CDCFG_REG 6 | ||
73 | #define GA_SMCFGA_REG 7 | ||
74 | #define GA_SMCFGB_REG 8 | ||
75 | #define GA_HMCTL_REG 9 | ||
76 | |||
77 | /* | ||
78 | * DMA channel identifiers (A and B) | ||
79 | */ | ||
80 | |||
81 | #define SSCAPE_DMA_A 0 | ||
82 | #define SSCAPE_DMA_B 1 | ||
83 | |||
84 | #define PORT(name) (devc->base+name) | ||
85 | |||
86 | /* | ||
87 | * Host commands recognized by the OBP microcode | ||
88 | */ | ||
89 | |||
90 | #define CMD_GEN_HOST_ACK 0x80 | ||
91 | #define CMD_GEN_MPU_ACK 0x81 | ||
92 | #define CMD_GET_BOARD_TYPE 0x82 | ||
93 | #define CMD_SET_CONTROL 0x88 /* Old firmware only */ | ||
94 | #define CMD_GET_CONTROL 0x89 /* Old firmware only */ | ||
95 | #define CTL_MASTER_VOL 0 | ||
96 | #define CTL_MIC_MODE 2 | ||
97 | #define CTL_SYNTH_VOL 4 | ||
98 | #define CTL_WAVE_VOL 7 | ||
99 | #define CMD_SET_EXTMIDI 0x8a | ||
100 | #define CMD_GET_EXTMIDI 0x8b | ||
101 | #define CMD_SET_MT32 0x8c | ||
102 | #define CMD_GET_MT32 0x8d | ||
103 | |||
104 | #define CMD_ACK 0x80 | ||
105 | |||
106 | #define IC_ODIE 1 | ||
107 | #define IC_OPUS 2 | ||
108 | |||
109 | typedef struct sscape_info | ||
110 | { | ||
111 | int base, irq, dma; | ||
112 | |||
113 | int codec, codec_irq; /* required to setup pnp cards*/ | ||
114 | int codec_type; | ||
115 | int ic_type; | ||
116 | char* raw_buf; | ||
117 | unsigned long raw_buf_phys; | ||
118 | int buffsize; /* -------------------------- */ | ||
119 | spinlock_t lock; | ||
120 | int ok; /* Properly detected */ | ||
121 | int failed; | ||
122 | int dma_allocated; | ||
123 | int codec_audiodev; | ||
124 | int opened; | ||
125 | int *osp; | ||
126 | int my_audiodev; | ||
127 | } sscape_info; | ||
128 | |||
129 | static struct sscape_info adev_info = { | ||
130 | 0 | ||
131 | }; | ||
132 | |||
133 | static struct sscape_info *devc = &adev_info; | ||
134 | static int sscape_mididev = -1; | ||
135 | |||
136 | /* Some older cards have assigned interrupt bits differently than new ones */ | ||
137 | static char valid_interrupts_old[] = { | ||
138 | 9, 7, 5, 15 | ||
139 | }; | ||
140 | |||
141 | static char valid_interrupts_new[] = { | ||
142 | 9, 5, 7, 10 | ||
143 | }; | ||
144 | |||
145 | static char *valid_interrupts = valid_interrupts_new; | ||
146 | |||
147 | /* | ||
148 | * See the bottom of the driver. This can be set by spea =0/1. | ||
149 | */ | ||
150 | |||
151 | #ifdef REVEAL_SPEA | ||
152 | static char old_hardware = 1; | ||
153 | #else | ||
154 | static char old_hardware; | ||
155 | #endif | ||
156 | |||
157 | static void sleep(unsigned howlong) | ||
158 | { | ||
159 | current->state = TASK_INTERRUPTIBLE; | ||
160 | schedule_timeout(howlong); | ||
161 | } | ||
162 | |||
163 | static unsigned char sscape_read(struct sscape_info *devc, int reg) | ||
164 | { | ||
165 | unsigned long flags; | ||
166 | unsigned char val; | ||
167 | |||
168 | spin_lock_irqsave(&devc->lock,flags); | ||
169 | outb(reg, PORT(ODIE_ADDR)); | ||
170 | val = inb(PORT(ODIE_DATA)); | ||
171 | spin_unlock_irqrestore(&devc->lock,flags); | ||
172 | return val; | ||
173 | } | ||
174 | |||
175 | static void __sscape_write(int reg, int data) | ||
176 | { | ||
177 | outb(reg, PORT(ODIE_ADDR)); | ||
178 | outb(data, PORT(ODIE_DATA)); | ||
179 | } | ||
180 | |||
181 | static void sscape_write(struct sscape_info *devc, int reg, int data) | ||
182 | { | ||
183 | unsigned long flags; | ||
184 | |||
185 | spin_lock_irqsave(&devc->lock,flags); | ||
186 | __sscape_write(reg, data); | ||
187 | spin_unlock_irqrestore(&devc->lock,flags); | ||
188 | } | ||
189 | |||
190 | static unsigned char sscape_pnp_read_codec(sscape_info* devc, unsigned char reg) | ||
191 | { | ||
192 | unsigned char res; | ||
193 | unsigned long flags; | ||
194 | |||
195 | spin_lock_irqsave(&devc->lock,flags); | ||
196 | outb( reg, devc -> codec); | ||
197 | res = inb (devc -> codec + 1); | ||
198 | spin_unlock_irqrestore(&devc->lock,flags); | ||
199 | return res; | ||
200 | |||
201 | } | ||
202 | |||
203 | static void sscape_pnp_write_codec(sscape_info* devc, unsigned char reg, unsigned char data) | ||
204 | { | ||
205 | unsigned long flags; | ||
206 | |||
207 | spin_lock_irqsave(&devc->lock,flags); | ||
208 | outb( reg, devc -> codec); | ||
209 | outb( data, devc -> codec + 1); | ||
210 | spin_unlock_irqrestore(&devc->lock,flags); | ||
211 | } | ||
212 | |||
213 | static void host_open(struct sscape_info *devc) | ||
214 | { | ||
215 | outb((0x00), PORT(HOST_CTRL)); /* Put the board to the host mode */ | ||
216 | } | ||
217 | |||
218 | static void host_close(struct sscape_info *devc) | ||
219 | { | ||
220 | outb((0x03), PORT(HOST_CTRL)); /* Put the board to the MIDI mode */ | ||
221 | } | ||
222 | |||
223 | static int host_write(struct sscape_info *devc, unsigned char *data, int count) | ||
224 | { | ||
225 | unsigned long flags; | ||
226 | int i, timeout_val; | ||
227 | |||
228 | spin_lock_irqsave(&devc->lock,flags); | ||
229 | /* | ||
230 | * Send the command and data bytes | ||
231 | */ | ||
232 | |||
233 | for (i = 0; i < count; i++) | ||
234 | { | ||
235 | for (timeout_val = 10000; timeout_val > 0; timeout_val--) | ||
236 | if (inb(PORT(HOST_CTRL)) & TX_READY) | ||
237 | break; | ||
238 | |||
239 | if (timeout_val <= 0) | ||
240 | { | ||
241 | spin_unlock_irqrestore(&devc->lock,flags); | ||
242 | return 0; | ||
243 | } | ||
244 | outb(data[i], PORT(HOST_DATA)); | ||
245 | } | ||
246 | spin_unlock_irqrestore(&devc->lock,flags); | ||
247 | return 1; | ||
248 | } | ||
249 | |||
250 | static int host_read(struct sscape_info *devc) | ||
251 | { | ||
252 | unsigned long flags; | ||
253 | int timeout_val; | ||
254 | unsigned char data; | ||
255 | |||
256 | spin_lock_irqsave(&devc->lock,flags); | ||
257 | /* | ||
258 | * Read a byte | ||
259 | */ | ||
260 | |||
261 | for (timeout_val = 10000; timeout_val > 0; timeout_val--) | ||
262 | if (inb(PORT(HOST_CTRL)) & RX_READY) | ||
263 | break; | ||
264 | |||
265 | if (timeout_val <= 0) | ||
266 | { | ||
267 | spin_unlock_irqrestore(&devc->lock,flags); | ||
268 | return -1; | ||
269 | } | ||
270 | data = inb(PORT(HOST_DATA)); | ||
271 | spin_unlock_irqrestore(&devc->lock,flags); | ||
272 | return data; | ||
273 | } | ||
274 | |||
275 | #if 0 /* unused */ | ||
276 | static int host_command1(struct sscape_info *devc, int cmd) | ||
277 | { | ||
278 | unsigned char buf[10]; | ||
279 | buf[0] = (unsigned char) (cmd & 0xff); | ||
280 | return host_write(devc, buf, 1); | ||
281 | } | ||
282 | #endif /* unused */ | ||
283 | |||
284 | |||
285 | static int host_command2(struct sscape_info *devc, int cmd, int parm1) | ||
286 | { | ||
287 | unsigned char buf[10]; | ||
288 | |||
289 | buf[0] = (unsigned char) (cmd & 0xff); | ||
290 | buf[1] = (unsigned char) (parm1 & 0xff); | ||
291 | |||
292 | return host_write(devc, buf, 2); | ||
293 | } | ||
294 | |||
295 | static int host_command3(struct sscape_info *devc, int cmd, int parm1, int parm2) | ||
296 | { | ||
297 | unsigned char buf[10]; | ||
298 | |||
299 | buf[0] = (unsigned char) (cmd & 0xff); | ||
300 | buf[1] = (unsigned char) (parm1 & 0xff); | ||
301 | buf[2] = (unsigned char) (parm2 & 0xff); | ||
302 | return host_write(devc, buf, 3); | ||
303 | } | ||
304 | |||
305 | static void set_mt32(struct sscape_info *devc, int value) | ||
306 | { | ||
307 | host_open(devc); | ||
308 | host_command2(devc, CMD_SET_MT32, value ? 1 : 0); | ||
309 | if (host_read(devc) != CMD_ACK) | ||
310 | { | ||
311 | /* printk( "SNDSCAPE: Setting MT32 mode failed\n"); */ | ||
312 | } | ||
313 | host_close(devc); | ||
314 | } | ||
315 | |||
316 | static void set_control(struct sscape_info *devc, int ctrl, int value) | ||
317 | { | ||
318 | host_open(devc); | ||
319 | host_command3(devc, CMD_SET_CONTROL, ctrl, value); | ||
320 | if (host_read(devc) != CMD_ACK) | ||
321 | { | ||
322 | /* printk( "SNDSCAPE: Setting control (%d) failed\n", ctrl); */ | ||
323 | } | ||
324 | host_close(devc); | ||
325 | } | ||
326 | |||
327 | static void do_dma(struct sscape_info *devc, int dma_chan, unsigned long buf, int blk_size, int mode) | ||
328 | { | ||
329 | unsigned char temp; | ||
330 | |||
331 | if (dma_chan != SSCAPE_DMA_A) | ||
332 | { | ||
333 | printk(KERN_WARNING "soundscape: Tried to use DMA channel != A. Why?\n"); | ||
334 | return; | ||
335 | } | ||
336 | audio_devs[devc->codec_audiodev]->flags &= ~DMA_AUTOMODE; | ||
337 | DMAbuf_start_dma(devc->codec_audiodev, buf, blk_size, mode); | ||
338 | audio_devs[devc->codec_audiodev]->flags |= DMA_AUTOMODE; | ||
339 | |||
340 | temp = devc->dma << 4; /* Setup DMA channel select bits */ | ||
341 | if (devc->dma <= 3) | ||
342 | temp |= 0x80; /* 8 bit DMA channel */ | ||
343 | |||
344 | temp |= 1; /* Trigger DMA */ | ||
345 | sscape_write(devc, GA_DMAA_REG, temp); | ||
346 | temp &= 0xfe; /* Clear DMA trigger */ | ||
347 | sscape_write(devc, GA_DMAA_REG, temp); | ||
348 | } | ||
349 | |||
350 | static int verify_mpu(struct sscape_info *devc) | ||
351 | { | ||
352 | /* | ||
353 | * The SoundScape board could be in three modes (MPU, 8250 and host). | ||
354 | * If the card is not in the MPU mode, enabling the MPU driver will | ||
355 | * cause infinite loop (the driver believes that there is always some | ||
356 | * received data in the buffer. | ||
357 | * | ||
358 | * Detect this by looking if there are more than 10 received MIDI bytes | ||
359 | * (0x00) in the buffer. | ||
360 | */ | ||
361 | |||
362 | int i; | ||
363 | |||
364 | for (i = 0; i < 10; i++) | ||
365 | { | ||
366 | if (inb(devc->base + HOST_CTRL) & 0x80) | ||
367 | return 1; | ||
368 | |||
369 | if (inb(devc->base) != 0x00) | ||
370 | return 1; | ||
371 | } | ||
372 | printk(KERN_WARNING "SoundScape: The device is not in the MPU-401 mode\n"); | ||
373 | return 0; | ||
374 | } | ||
375 | |||
376 | static int sscape_coproc_open(void *dev_info, int sub_device) | ||
377 | { | ||
378 | if (sub_device == COPR_MIDI) | ||
379 | { | ||
380 | set_mt32(devc, 0); | ||
381 | if (!verify_mpu(devc)) | ||
382 | return -EIO; | ||
383 | } | ||
384 | return 0; | ||
385 | } | ||
386 | |||
387 | static void sscape_coproc_close(void *dev_info, int sub_device) | ||
388 | { | ||
389 | struct sscape_info *devc = dev_info; | ||
390 | unsigned long flags; | ||
391 | |||
392 | spin_lock_irqsave(&devc->lock,flags); | ||
393 | if (devc->dma_allocated) | ||
394 | { | ||
395 | __sscape_write(GA_DMAA_REG, 0x20); /* DMA channel disabled */ | ||
396 | devc->dma_allocated = 0; | ||
397 | } | ||
398 | spin_unlock_irqrestore(&devc->lock,flags); | ||
399 | return; | ||
400 | } | ||
401 | |||
402 | static void sscape_coproc_reset(void *dev_info) | ||
403 | { | ||
404 | } | ||
405 | |||
406 | static int sscape_download_boot(struct sscape_info *devc, unsigned char *block, int size, int flag) | ||
407 | { | ||
408 | unsigned long flags; | ||
409 | unsigned char temp; | ||
410 | volatile int done, timeout_val; | ||
411 | static unsigned char codec_dma_bits; | ||
412 | |||
413 | if (flag & CPF_FIRST) | ||
414 | { | ||
415 | /* | ||
416 | * First block. Have to allocate DMA and to reset the board | ||
417 | * before continuing. | ||
418 | */ | ||
419 | |||
420 | spin_lock_irqsave(&devc->lock,flags); | ||
421 | codec_dma_bits = sscape_read(devc, GA_CDCFG_REG); | ||
422 | |||
423 | if (devc->dma_allocated == 0) | ||
424 | devc->dma_allocated = 1; | ||
425 | |||
426 | spin_unlock_irqrestore(&devc->lock,flags); | ||
427 | |||
428 | sscape_write(devc, GA_HMCTL_REG, | ||
429 | (temp = sscape_read(devc, GA_HMCTL_REG)) & 0x3f); /*Reset */ | ||
430 | |||
431 | for (timeout_val = 10000; timeout_val > 0; timeout_val--) | ||
432 | sscape_read(devc, GA_HMCTL_REG); /* Delay */ | ||
433 | |||
434 | /* Take board out of reset */ | ||
435 | sscape_write(devc, GA_HMCTL_REG, | ||
436 | (temp = sscape_read(devc, GA_HMCTL_REG)) | 0x80); | ||
437 | } | ||
438 | /* | ||
439 | * Transfer one code block using DMA | ||
440 | */ | ||
441 | if (audio_devs[devc->codec_audiodev]->dmap_out->raw_buf == NULL) | ||
442 | { | ||
443 | printk(KERN_WARNING "soundscape: DMA buffer not available\n"); | ||
444 | return 0; | ||
445 | } | ||
446 | memcpy(audio_devs[devc->codec_audiodev]->dmap_out->raw_buf, block, size); | ||
447 | |||
448 | spin_lock_irqsave(&devc->lock,flags); | ||
449 | |||
450 | /******** INTERRUPTS DISABLED NOW ********/ | ||
451 | |||
452 | do_dma(devc, SSCAPE_DMA_A, | ||
453 | audio_devs[devc->codec_audiodev]->dmap_out->raw_buf_phys, | ||
454 | size, DMA_MODE_WRITE); | ||
455 | |||
456 | /* | ||
457 | * Wait until transfer completes. | ||
458 | */ | ||
459 | |||
460 | done = 0; | ||
461 | timeout_val = 30; | ||
462 | while (!done && timeout_val-- > 0) | ||
463 | { | ||
464 | int resid; | ||
465 | |||
466 | if (HZ / 50) | ||
467 | sleep(HZ / 50); | ||
468 | clear_dma_ff(devc->dma); | ||
469 | if ((resid = get_dma_residue(devc->dma)) == 0) | ||
470 | done = 1; | ||
471 | } | ||
472 | |||
473 | spin_unlock_irqrestore(&devc->lock,flags); | ||
474 | if (!done) | ||
475 | return 0; | ||
476 | |||
477 | if (flag & CPF_LAST) | ||
478 | { | ||
479 | /* | ||
480 | * Take the board out of reset | ||
481 | */ | ||
482 | outb((0x00), PORT(HOST_CTRL)); | ||
483 | outb((0x00), PORT(MIDI_CTRL)); | ||
484 | |||
485 | temp = sscape_read(devc, GA_HMCTL_REG); | ||
486 | temp |= 0x40; | ||
487 | sscape_write(devc, GA_HMCTL_REG, temp); /* Kickstart the board */ | ||
488 | |||
489 | /* | ||
490 | * Wait until the ODB wakes up | ||
491 | */ | ||
492 | spin_lock_irqsave(&devc->lock,flags); | ||
493 | done = 0; | ||
494 | timeout_val = 5 * HZ; | ||
495 | while (!done && timeout_val-- > 0) | ||
496 | { | ||
497 | unsigned char x; | ||
498 | |||
499 | sleep(1); | ||
500 | x = inb(PORT(HOST_DATA)); | ||
501 | if (x == 0xff || x == 0xfe) /* OBP startup acknowledge */ | ||
502 | { | ||
503 | DDB(printk("Soundscape: Acknowledge = %x\n", x)); | ||
504 | done = 1; | ||
505 | } | ||
506 | } | ||
507 | sscape_write(devc, GA_CDCFG_REG, codec_dma_bits); | ||
508 | |||
509 | spin_unlock_irqrestore(&devc->lock,flags); | ||
510 | if (!done) | ||
511 | { | ||
512 | printk(KERN_ERR "soundscape: The OBP didn't respond after code download\n"); | ||
513 | return 0; | ||
514 | } | ||
515 | spin_lock_irqsave(&devc->lock,flags); | ||
516 | done = 0; | ||
517 | timeout_val = 5 * HZ; | ||
518 | while (!done && timeout_val-- > 0) | ||
519 | { | ||
520 | sleep(1); | ||
521 | if (inb(PORT(HOST_DATA)) == 0xfe) /* Host startup acknowledge */ | ||
522 | done = 1; | ||
523 | } | ||
524 | spin_unlock_irqrestore(&devc->lock,flags); | ||
525 | if (!done) | ||
526 | { | ||
527 | printk(KERN_ERR "soundscape: OBP Initialization failed.\n"); | ||
528 | return 0; | ||
529 | } | ||
530 | printk(KERN_INFO "SoundScape board initialized OK\n"); | ||
531 | set_control(devc, CTL_MASTER_VOL, 100); | ||
532 | set_control(devc, CTL_SYNTH_VOL, 100); | ||
533 | |||
534 | #ifdef SSCAPE_DEBUG3 | ||
535 | /* | ||
536 | * Temporary debugging aid. Print contents of the registers after | ||
537 | * downloading the code. | ||
538 | */ | ||
539 | { | ||
540 | int i; | ||
541 | |||
542 | for (i = 0; i < 13; i++) | ||
543 | printk("I%d = %02x (new value)\n", i, sscape_read(devc, i)); | ||
544 | } | ||
545 | #endif | ||
546 | |||
547 | } | ||
548 | return 1; | ||
549 | } | ||
550 | |||
551 | static int download_boot_block(void *dev_info, copr_buffer * buf) | ||
552 | { | ||
553 | if (buf->len <= 0 || buf->len > sizeof(buf->data)) | ||
554 | return -EINVAL; | ||
555 | |||
556 | if (!sscape_download_boot(devc, buf->data, buf->len, buf->flags)) | ||
557 | { | ||
558 | printk(KERN_ERR "soundscape: Unable to load microcode block to the OBP.\n"); | ||
559 | return -EIO; | ||
560 | } | ||
561 | return 0; | ||
562 | } | ||
563 | |||
564 | static int sscape_coproc_ioctl(void *dev_info, unsigned int cmd, void __user *arg, int local) | ||
565 | { | ||
566 | copr_buffer *buf; | ||
567 | int err; | ||
568 | |||
569 | switch (cmd) | ||
570 | { | ||
571 | case SNDCTL_COPR_RESET: | ||
572 | sscape_coproc_reset(dev_info); | ||
573 | return 0; | ||
574 | |||
575 | case SNDCTL_COPR_LOAD: | ||
576 | buf = (copr_buffer *) vmalloc(sizeof(copr_buffer)); | ||
577 | if (buf == NULL) | ||
578 | return -ENOSPC; | ||
579 | if (copy_from_user(buf, arg, sizeof(copr_buffer))) | ||
580 | { | ||
581 | vfree(buf); | ||
582 | return -EFAULT; | ||
583 | } | ||
584 | err = download_boot_block(dev_info, buf); | ||
585 | vfree(buf); | ||
586 | return err; | ||
587 | |||
588 | default: | ||
589 | return -EINVAL; | ||
590 | } | ||
591 | } | ||
592 | |||
593 | static coproc_operations sscape_coproc_operations = | ||
594 | { | ||
595 | "SoundScape M68K", | ||
596 | THIS_MODULE, | ||
597 | sscape_coproc_open, | ||
598 | sscape_coproc_close, | ||
599 | sscape_coproc_ioctl, | ||
600 | sscape_coproc_reset, | ||
601 | &adev_info | ||
602 | }; | ||
603 | |||
604 | static struct resource *sscape_ports; | ||
605 | static int sscape_is_pnp; | ||
606 | |||
607 | static void __init attach_sscape(struct address_info *hw_config) | ||
608 | { | ||
609 | #ifndef SSCAPE_REGS | ||
610 | /* | ||
611 | * Config register values for Spea/V7 Media FX and Ensoniq S-2000. | ||
612 | * These values are card | ||
613 | * dependent. If you have another SoundScape based card, you have to | ||
614 | * find the correct values. Do the following: | ||
615 | * - Compile this driver with SSCAPE_DEBUG1 defined. | ||
616 | * - Shut down and power off your machine. | ||
617 | * - Boot with DOS so that the SSINIT.EXE program is run. | ||
618 | * - Warm boot to {Linux|SYSV|BSD} and write down the lines displayed | ||
619 | * when detecting the SoundScape. | ||
620 | * - Modify the following list to use the values printed during boot. | ||
621 | * Undefine the SSCAPE_DEBUG1 | ||
622 | */ | ||
623 | #define SSCAPE_REGS { \ | ||
624 | /* I0 */ 0x00, \ | ||
625 | /* I1 */ 0xf0, /* Note! Ignored. Set always to 0xf0 */ \ | ||
626 | /* I2 */ 0x20, /* Note! Ignored. Set always to 0x20 */ \ | ||
627 | /* I3 */ 0x20, /* Note! Ignored. Set always to 0x20 */ \ | ||
628 | /* I4 */ 0xf5, /* Ignored */ \ | ||
629 | /* I5 */ 0x10, \ | ||
630 | /* I6 */ 0x00, \ | ||
631 | /* I7 */ 0x2e, /* I7 MEM config A. Likely to vary between models */ \ | ||
632 | /* I8 */ 0x00, /* I8 MEM config B. Likely to vary between models */ \ | ||
633 | /* I9 */ 0x40 /* Ignored */ \ | ||
634 | } | ||
635 | #endif | ||
636 | |||
637 | unsigned long flags; | ||
638 | static unsigned char regs[10] = SSCAPE_REGS; | ||
639 | |||
640 | int i, irq_bits = 0xff; | ||
641 | |||
642 | if (old_hardware) | ||
643 | { | ||
644 | valid_interrupts = valid_interrupts_old; | ||
645 | conf_printf("Ensoniq SoundScape (old)", hw_config); | ||
646 | } | ||
647 | else | ||
648 | conf_printf("Ensoniq SoundScape", hw_config); | ||
649 | |||
650 | for (i = 0; i < 4; i++) | ||
651 | { | ||
652 | if (hw_config->irq == valid_interrupts[i]) | ||
653 | { | ||
654 | irq_bits = i; | ||
655 | break; | ||
656 | } | ||
657 | } | ||
658 | if (hw_config->irq > 15 || (regs[4] = irq_bits == 0xff)) | ||
659 | { | ||
660 | printk(KERN_ERR "Invalid IRQ%d\n", hw_config->irq); | ||
661 | release_region(devc->base, 2); | ||
662 | release_region(devc->base + 2, 6); | ||
663 | if (sscape_is_pnp) | ||
664 | release_region(devc->codec, 2); | ||
665 | return; | ||
666 | } | ||
667 | |||
668 | if (!sscape_is_pnp) { | ||
669 | |||
670 | spin_lock_irqsave(&devc->lock,flags); | ||
671 | /* Host interrupt enable */ | ||
672 | sscape_write(devc, 1, 0xf0); /* All interrupts enabled */ | ||
673 | /* DMA A status/trigger register */ | ||
674 | sscape_write(devc, 2, 0x20); /* DMA channel disabled */ | ||
675 | /* DMA B status/trigger register */ | ||
676 | sscape_write(devc, 3, 0x20); /* DMA channel disabled */ | ||
677 | /* Host interrupt config reg */ | ||
678 | sscape_write(devc, 4, 0xf0 | (irq_bits << 2) | irq_bits); | ||
679 | /* Don't destroy CD-ROM DMA config bits (0xc0) */ | ||
680 | sscape_write(devc, 5, (regs[5] & 0x3f) | (sscape_read(devc, 5) & 0xc0)); | ||
681 | /* CD-ROM config (WSS codec actually) */ | ||
682 | sscape_write(devc, 6, regs[6]); | ||
683 | sscape_write(devc, 7, regs[7]); | ||
684 | sscape_write(devc, 8, regs[8]); | ||
685 | /* Master control reg. Don't modify CR-ROM bits. Disable SB emul */ | ||
686 | sscape_write(devc, 9, (sscape_read(devc, 9) & 0xf0) | 0x08); | ||
687 | spin_unlock_irqrestore(&devc->lock,flags); | ||
688 | } | ||
689 | #ifdef SSCAPE_DEBUG2 | ||
690 | /* | ||
691 | * Temporary debugging aid. Print contents of the registers after | ||
692 | * changing them. | ||
693 | */ | ||
694 | { | ||
695 | int i; | ||
696 | |||
697 | for (i = 0; i < 13; i++) | ||
698 | printk("I%d = %02x (new value)\n", i, sscape_read(devc, i)); | ||
699 | } | ||
700 | #endif | ||
701 | |||
702 | if (probe_mpu401(hw_config, sscape_ports)) | ||
703 | hw_config->always_detect = 1; | ||
704 | hw_config->name = "SoundScape"; | ||
705 | |||
706 | hw_config->irq *= -1; /* Negative value signals IRQ sharing */ | ||
707 | attach_mpu401(hw_config, THIS_MODULE); | ||
708 | hw_config->irq *= -1; /* Restore it */ | ||
709 | |||
710 | if (hw_config->slots[1] != -1) /* The MPU driver installed itself */ | ||
711 | { | ||
712 | sscape_mididev = hw_config->slots[1]; | ||
713 | midi_devs[hw_config->slots[1]]->coproc = &sscape_coproc_operations; | ||
714 | } | ||
715 | sscape_write(devc, GA_INTENA_REG, 0x80); /* Master IRQ enable */ | ||
716 | devc->ok = 1; | ||
717 | devc->failed = 0; | ||
718 | } | ||
719 | |||
720 | static int detect_ga(sscape_info * devc) | ||
721 | { | ||
722 | unsigned char save; | ||
723 | |||
724 | DDB(printk("Entered Soundscape detect_ga(%x)\n", devc->base)); | ||
725 | |||
726 | /* | ||
727 | * First check that the address register of "ODIE" is | ||
728 | * there and that it has exactly 4 writable bits. | ||
729 | * First 4 bits | ||
730 | */ | ||
731 | |||
732 | if ((save = inb(PORT(ODIE_ADDR))) & 0xf0) | ||
733 | { | ||
734 | DDB(printk("soundscape: Detect error A\n")); | ||
735 | return 0; | ||
736 | } | ||
737 | outb((0x00), PORT(ODIE_ADDR)); | ||
738 | if (inb(PORT(ODIE_ADDR)) != 0x00) | ||
739 | { | ||
740 | DDB(printk("soundscape: Detect error B\n")); | ||
741 | return 0; | ||
742 | } | ||
743 | outb((0xff), PORT(ODIE_ADDR)); | ||
744 | if (inb(PORT(ODIE_ADDR)) != 0x0f) | ||
745 | { | ||
746 | DDB(printk("soundscape: Detect error C\n")); | ||
747 | return 0; | ||
748 | } | ||
749 | outb((save), PORT(ODIE_ADDR)); | ||
750 | |||
751 | /* | ||
752 | * Now verify that some indirect registers return zero on some bits. | ||
753 | * This may break the driver with some future revisions of "ODIE" but... | ||
754 | */ | ||
755 | |||
756 | if (sscape_read(devc, 0) & 0x0c) | ||
757 | { | ||
758 | DDB(printk("soundscape: Detect error D (%x)\n", sscape_read(devc, 0))); | ||
759 | return 0; | ||
760 | } | ||
761 | if (sscape_read(devc, 1) & 0x0f) | ||
762 | { | ||
763 | DDB(printk("soundscape: Detect error E\n")); | ||
764 | return 0; | ||
765 | } | ||
766 | if (sscape_read(devc, 5) & 0x0f) | ||
767 | { | ||
768 | DDB(printk("soundscape: Detect error F\n")); | ||
769 | return 0; | ||
770 | } | ||
771 | return 1; | ||
772 | } | ||
773 | |||
774 | static int sscape_read_host_ctrl(sscape_info* devc) | ||
775 | { | ||
776 | return host_read(devc); | ||
777 | } | ||
778 | |||
779 | static void sscape_write_host_ctrl2(sscape_info *devc, int a, int b) | ||
780 | { | ||
781 | host_command2(devc, a, b); | ||
782 | } | ||
783 | |||
784 | static int sscape_alloc_dma(sscape_info *devc) | ||
785 | { | ||
786 | char *start_addr, *end_addr; | ||
787 | int dma_pagesize; | ||
788 | int sz, size; | ||
789 | struct page *page; | ||
790 | |||
791 | if (devc->raw_buf != NULL) return 0; /* Already done */ | ||
792 | dma_pagesize = (devc->dma < 4) ? (64 * 1024) : (128 * 1024); | ||
793 | devc->raw_buf = NULL; | ||
794 | devc->buffsize = 8192*4; | ||
795 | if (devc->buffsize > dma_pagesize) devc->buffsize = dma_pagesize; | ||
796 | start_addr = NULL; | ||
797 | /* | ||
798 | * Now loop until we get a free buffer. Try to get smaller buffer if | ||
799 | * it fails. Don't accept smaller than 8k buffer for performance | ||
800 | * reasons. | ||
801 | */ | ||
802 | while (start_addr == NULL && devc->buffsize > PAGE_SIZE) { | ||
803 | for (sz = 0, size = PAGE_SIZE; size < devc->buffsize; sz++, size <<= 1); | ||
804 | devc->buffsize = PAGE_SIZE * (1 << sz); | ||
805 | start_addr = (char *) __get_free_pages(GFP_ATOMIC|GFP_DMA, sz); | ||
806 | if (start_addr == NULL) devc->buffsize /= 2; | ||
807 | } | ||
808 | |||
809 | if (start_addr == NULL) { | ||
810 | printk(KERN_ERR "sscape pnp init error: Couldn't allocate DMA buffer\n"); | ||
811 | return 0; | ||
812 | } else { | ||
813 | /* make some checks */ | ||
814 | end_addr = start_addr + devc->buffsize - 1; | ||
815 | /* now check if it fits into the same dma-pagesize */ | ||
816 | |||
817 | if (((long) start_addr & ~(dma_pagesize - 1)) != ((long) end_addr & ~(dma_pagesize - 1)) | ||
818 | || end_addr >= (char *) (MAX_DMA_ADDRESS)) { | ||
819 | printk(KERN_ERR "sscape pnp: Got invalid address 0x%lx for %db DMA-buffer\n", (long) start_addr, devc->buffsize); | ||
820 | return 0; | ||
821 | } | ||
822 | } | ||
823 | devc->raw_buf = start_addr; | ||
824 | devc->raw_buf_phys = virt_to_bus(start_addr); | ||
825 | |||
826 | for (page = virt_to_page(start_addr); page <= virt_to_page(end_addr); page++) | ||
827 | SetPageReserved(page); | ||
828 | return 1; | ||
829 | } | ||
830 | |||
831 | static void sscape_free_dma(sscape_info *devc) | ||
832 | { | ||
833 | int sz, size; | ||
834 | unsigned long start_addr, end_addr; | ||
835 | struct page *page; | ||
836 | |||
837 | if (devc->raw_buf == NULL) return; | ||
838 | for (sz = 0, size = PAGE_SIZE; size < devc->buffsize; sz++, size <<= 1); | ||
839 | start_addr = (unsigned long) devc->raw_buf; | ||
840 | end_addr = start_addr + devc->buffsize; | ||
841 | |||
842 | for (page = virt_to_page(start_addr); page <= virt_to_page(end_addr); page++) | ||
843 | ClearPageReserved(page); | ||
844 | |||
845 | free_pages((unsigned long) devc->raw_buf, sz); | ||
846 | devc->raw_buf = NULL; | ||
847 | } | ||
848 | |||
849 | /* Intel version !!!!!!!!! */ | ||
850 | |||
851 | static int sscape_start_dma(int chan, unsigned long physaddr, int count, int dma_mode) | ||
852 | { | ||
853 | unsigned long flags; | ||
854 | |||
855 | flags = claim_dma_lock(); | ||
856 | disable_dma(chan); | ||
857 | clear_dma_ff(chan); | ||
858 | set_dma_mode(chan, dma_mode); | ||
859 | set_dma_addr(chan, physaddr); | ||
860 | set_dma_count(chan, count); | ||
861 | enable_dma(chan); | ||
862 | release_dma_lock(flags); | ||
863 | return 0; | ||
864 | } | ||
865 | |||
866 | static void sscape_pnp_start_dma(sscape_info* devc, int arg ) | ||
867 | { | ||
868 | int reg; | ||
869 | if (arg == 0) reg = 2; | ||
870 | else reg = 3; | ||
871 | |||
872 | sscape_write(devc, reg, sscape_read( devc, reg) | 0x01); | ||
873 | sscape_write(devc, reg, sscape_read( devc, reg) & 0xFE); | ||
874 | } | ||
875 | |||
876 | static int sscape_pnp_wait_dma (sscape_info* devc, int arg ) | ||
877 | { | ||
878 | int reg; | ||
879 | unsigned long i; | ||
880 | unsigned char d; | ||
881 | |||
882 | if (arg == 0) reg = 2; | ||
883 | else reg = 3; | ||
884 | |||
885 | sleep ( 1 ); | ||
886 | i = 0; | ||
887 | do { | ||
888 | d = sscape_read(devc, reg) & 1; | ||
889 | if ( d == 1) break; | ||
890 | i++; | ||
891 | } while (i < 500000); | ||
892 | d = sscape_read(devc, reg) & 1; | ||
893 | return d; | ||
894 | } | ||
895 | |||
896 | static int sscape_pnp_alloc_dma(sscape_info* devc) | ||
897 | { | ||
898 | /* printk(KERN_INFO "sscape: requesting dma\n"); */ | ||
899 | if (request_dma(devc -> dma, "sscape")) return 0; | ||
900 | /* printk(KERN_INFO "sscape: dma channel allocated\n"); */ | ||
901 | if (!sscape_alloc_dma(devc)) { | ||
902 | free_dma(devc -> dma); | ||
903 | return 0; | ||
904 | }; | ||
905 | return 1; | ||
906 | } | ||
907 | |||
908 | static void sscape_pnp_free_dma(sscape_info* devc) | ||
909 | { | ||
910 | sscape_free_dma( devc); | ||
911 | free_dma(devc -> dma ); | ||
912 | /* printk(KERN_INFO "sscape: dma released\n"); */ | ||
913 | } | ||
914 | |||
915 | static int sscape_pnp_upload_file(sscape_info* devc, char* fn) | ||
916 | { | ||
917 | int done = 0; | ||
918 | int timeout_val; | ||
919 | char* data,*dt; | ||
920 | int len,l; | ||
921 | unsigned long flags; | ||
922 | |||
923 | sscape_write( devc, 9, sscape_read(devc, 9 ) & 0x3F ); | ||
924 | sscape_write( devc, 2, (devc -> dma << 4) | 0x80 ); | ||
925 | sscape_write( devc, 3, 0x20 ); | ||
926 | sscape_write( devc, 9, sscape_read( devc, 9 ) | 0x80 ); | ||
927 | |||
928 | len = mod_firmware_load(fn, &data); | ||
929 | if (len == 0) { | ||
930 | printk(KERN_ERR "sscape: file not found: %s\n", fn); | ||
931 | return 0; | ||
932 | } | ||
933 | dt = data; | ||
934 | spin_lock_irqsave(&devc->lock,flags); | ||
935 | while ( len > 0 ) { | ||
936 | if (len > devc -> buffsize) l = devc->buffsize; | ||
937 | else l = len; | ||
938 | len -= l; | ||
939 | memcpy(devc->raw_buf, dt, l); dt += l; | ||
940 | sscape_start_dma(devc->dma, devc->raw_buf_phys, l, 0x48); | ||
941 | sscape_pnp_start_dma ( devc, 0 ); | ||
942 | if (sscape_pnp_wait_dma ( devc, 0 ) == 0) { | ||
943 | spin_unlock_irqrestore(&devc->lock,flags); | ||
944 | return 0; | ||
945 | } | ||
946 | } | ||
947 | |||
948 | spin_unlock_irqrestore(&devc->lock,flags); | ||
949 | vfree(data); | ||
950 | |||
951 | outb(0, devc -> base + 2); | ||
952 | outb(0, devc -> base); | ||
953 | |||
954 | sscape_write ( devc, 9, sscape_read( devc, 9 ) | 0x40); | ||
955 | |||
956 | timeout_val = 5 * HZ; | ||
957 | while (!done && timeout_val-- > 0) | ||
958 | { | ||
959 | unsigned char x; | ||
960 | sleep(1); | ||
961 | x = inb( devc -> base + 3); | ||
962 | if (x == 0xff || x == 0xfe) /* OBP startup acknowledge */ | ||
963 | { | ||
964 | //printk(KERN_ERR "Soundscape: Acknowledge = %x\n", x); | ||
965 | done = 1; | ||
966 | } | ||
967 | } | ||
968 | timeout_val = 5 * HZ; | ||
969 | done = 0; | ||
970 | while (!done && timeout_val-- > 0) | ||
971 | { | ||
972 | unsigned char x; | ||
973 | sleep(1); | ||
974 | x = inb( devc -> base + 3); | ||
975 | if (x == 0xfe) /* OBP startup acknowledge */ | ||
976 | { | ||
977 | //printk(KERN_ERR "Soundscape: Acknowledge = %x\n", x); | ||
978 | done = 1; | ||
979 | } | ||
980 | } | ||
981 | |||
982 | if ( !done ) printk(KERN_ERR "soundscape: OBP Initialization failed.\n"); | ||
983 | |||
984 | sscape_write( devc, 2, devc->ic_type == IC_ODIE ? 0x70 : 0x40); | ||
985 | sscape_write( devc, 3, (devc -> dma << 4) + 0x80); | ||
986 | return 1; | ||
987 | } | ||
988 | |||
989 | static void __init sscape_pnp_init_hw(sscape_info* devc) | ||
990 | { | ||
991 | unsigned char midi_irq = 0, sb_irq = 0; | ||
992 | unsigned i; | ||
993 | static char code_file_name[23] = "/sndscape/sndscape.cox"; | ||
994 | |||
995 | int sscape_joystic_enable = 0x7f; | ||
996 | int sscape_mic_enable = 0; | ||
997 | int sscape_ext_midi = 0; | ||
998 | |||
999 | if ( !sscape_pnp_alloc_dma(devc) ) { | ||
1000 | printk(KERN_ERR "sscape: faild to allocate dma\n"); | ||
1001 | return; | ||
1002 | } | ||
1003 | |||
1004 | for (i = 0; i < 4; i++) { | ||
1005 | if ( devc -> irq == valid_interrupts[i] ) | ||
1006 | midi_irq = i; | ||
1007 | if ( devc -> codec_irq == valid_interrupts[i] ) | ||
1008 | sb_irq = i; | ||
1009 | } | ||
1010 | |||
1011 | sscape_write( devc, 5, 0x50); | ||
1012 | sscape_write( devc, 7, 0x2e); | ||
1013 | sscape_write( devc, 8, 0x00); | ||
1014 | |||
1015 | sscape_write( devc, 2, devc->ic_type == IC_ODIE ? 0x70 : 0x40); | ||
1016 | sscape_write( devc, 3, ( devc -> dma << 4) | 0x80); | ||
1017 | |||
1018 | sscape_write (devc, 4, 0xF0 | (midi_irq<<2) | midi_irq); | ||
1019 | |||
1020 | i = 0x10; //sscape_read(devc, 9) & (devc->ic_type == IC_ODIE ? 0xf0 : 0xc0); | ||
1021 | if (sscape_joystic_enable) i |= 8; | ||
1022 | |||
1023 | sscape_write (devc, 9, i); | ||
1024 | sscape_write (devc, 6, 0x80); | ||
1025 | sscape_write (devc, 1, 0x80); | ||
1026 | |||
1027 | if (devc -> codec_type == 2) { | ||
1028 | sscape_pnp_write_codec( devc, 0x0C, 0x50); | ||
1029 | sscape_pnp_write_codec( devc, 0x10, sscape_pnp_read_codec( devc, 0x10) & 0x3F); | ||
1030 | sscape_pnp_write_codec( devc, 0x11, sscape_pnp_read_codec( devc, 0x11) | 0xC0); | ||
1031 | sscape_pnp_write_codec( devc, 29, 0x20); | ||
1032 | } | ||
1033 | |||
1034 | if (sscape_pnp_upload_file(devc, "/sndscape/scope.cod") == 0 ) { | ||
1035 | printk(KERN_ERR "sscape: faild to upload file /sndscape/scope.cod\n"); | ||
1036 | sscape_pnp_free_dma(devc); | ||
1037 | return; | ||
1038 | } | ||
1039 | |||
1040 | i = sscape_read_host_ctrl( devc ); | ||
1041 | |||
1042 | if ( (i & 0x0F) > 7 ) { | ||
1043 | printk(KERN_ERR "sscape: scope.cod faild\n"); | ||
1044 | sscape_pnp_free_dma(devc); | ||
1045 | return; | ||
1046 | } | ||
1047 | if ( i & 0x10 ) sscape_write( devc, 7, 0x2F); | ||
1048 | code_file_name[21] = (char) ( i & 0x0F) + 0x30; | ||
1049 | if (sscape_pnp_upload_file( devc, code_file_name) == 0) { | ||
1050 | printk(KERN_ERR "sscape: faild to upload file %s\n", code_file_name); | ||
1051 | sscape_pnp_free_dma(devc); | ||
1052 | return; | ||
1053 | } | ||
1054 | |||
1055 | if (devc->ic_type != IC_ODIE) { | ||
1056 | sscape_pnp_write_codec( devc, 10, (sscape_pnp_read_codec(devc, 10) & 0x7f) | | ||
1057 | ( sscape_mic_enable == 0 ? 0x00 : 0x80) ); | ||
1058 | } | ||
1059 | sscape_write_host_ctrl2( devc, 0x84, 0x64 ); /* MIDI volume */ | ||
1060 | sscape_write_host_ctrl2( devc, 0x86, 0x64 ); /* MIDI volume?? */ | ||
1061 | sscape_write_host_ctrl2( devc, 0x8A, sscape_ext_midi); | ||
1062 | |||
1063 | sscape_pnp_write_codec ( devc, 6, 0x3f ); //WAV_VOL | ||
1064 | sscape_pnp_write_codec ( devc, 7, 0x3f ); //WAV_VOL | ||
1065 | sscape_pnp_write_codec ( devc, 2, 0x1F ); //WD_CDXVOLL | ||
1066 | sscape_pnp_write_codec ( devc, 3, 0x1F ); //WD_CDXVOLR | ||
1067 | |||
1068 | if (devc -> codec_type == 1) { | ||
1069 | sscape_pnp_write_codec ( devc, 4, 0x1F ); | ||
1070 | sscape_pnp_write_codec ( devc, 5, 0x1F ); | ||
1071 | sscape_write_host_ctrl2( devc, 0x88, sscape_mic_enable); | ||
1072 | } else { | ||
1073 | int t; | ||
1074 | sscape_pnp_write_codec ( devc, 0x10, 0x1F << 1); | ||
1075 | sscape_pnp_write_codec ( devc, 0x11, 0xC0 | (0x1F << 1)); | ||
1076 | |||
1077 | t = sscape_pnp_read_codec( devc, 0x00) & 0xDF; | ||
1078 | if ( (sscape_mic_enable == 0)) t |= 0; | ||
1079 | else t |= 0x20; | ||
1080 | sscape_pnp_write_codec ( devc, 0x00, t); | ||
1081 | t = sscape_pnp_read_codec( devc, 0x01) & 0xDF; | ||
1082 | if ( (sscape_mic_enable == 0) ) t |= 0; | ||
1083 | else t |= 0x20; | ||
1084 | sscape_pnp_write_codec ( devc, 0x01, t); | ||
1085 | sscape_pnp_write_codec ( devc, 0x40 | 29 , 0x20); | ||
1086 | outb(0, devc -> codec); | ||
1087 | } | ||
1088 | if (devc -> ic_type == IC_OPUS ) { | ||
1089 | int i = sscape_read( devc, 9 ); | ||
1090 | sscape_write( devc, 9, i | 3 ); | ||
1091 | sscape_write( devc, 3, 0x40); | ||
1092 | |||
1093 | if (request_region(0x228, 1, "sscape setup junk")) { | ||
1094 | outb(0, 0x228); | ||
1095 | release_region(0x228,1); | ||
1096 | } | ||
1097 | sscape_write( devc, 3, (devc -> dma << 4) | 0x80); | ||
1098 | sscape_write( devc, 9, i ); | ||
1099 | } | ||
1100 | |||
1101 | host_close ( devc ); | ||
1102 | sscape_pnp_free_dma(devc); | ||
1103 | } | ||
1104 | |||
1105 | static int __init detect_sscape_pnp(sscape_info* devc) | ||
1106 | { | ||
1107 | long i, irq_bits = 0xff; | ||
1108 | unsigned int d; | ||
1109 | |||
1110 | DDB(printk("Entered detect_sscape_pnp(%x)\n", devc->base)); | ||
1111 | |||
1112 | if (!request_region(devc->codec, 2, "sscape codec")) { | ||
1113 | printk(KERN_ERR "detect_sscape_pnp: port %x is not free\n", devc->codec); | ||
1114 | return 0; | ||
1115 | } | ||
1116 | |||
1117 | if ((inb(devc->base + 2) & 0x78) != 0) | ||
1118 | goto fail; | ||
1119 | |||
1120 | d = inb ( devc -> base + 4) & 0xF0; | ||
1121 | if (d & 0x80) | ||
1122 | goto fail; | ||
1123 | |||
1124 | if (d == 0) { | ||
1125 | devc->codec_type = 1; | ||
1126 | devc->ic_type = IC_ODIE; | ||
1127 | } else if ( (d & 0x60) != 0) { | ||
1128 | devc->codec_type = 2; | ||
1129 | devc->ic_type = IC_OPUS; | ||
1130 | } else if ( (d & 0x40) != 0) { /* WTF? */ | ||
1131 | devc->codec_type = 2; | ||
1132 | devc->ic_type = IC_ODIE; | ||
1133 | } else | ||
1134 | goto fail; | ||
1135 | |||
1136 | sscape_is_pnp = 1; | ||
1137 | |||
1138 | outb(0xFA, devc -> base+4); | ||
1139 | if ((inb( devc -> base+4) & 0x9F) != 0x0A) | ||
1140 | goto fail; | ||
1141 | outb(0xFE, devc -> base+4); | ||
1142 | if ( (inb(devc -> base+4) & 0x9F) != 0x0E) | ||
1143 | goto fail; | ||
1144 | if ( (inb(devc -> base+5) & 0x9F) != 0x0E) | ||
1145 | goto fail; | ||
1146 | |||
1147 | if (devc->codec_type == 2) { | ||
1148 | if (devc->codec != devc->base + 8) { | ||
1149 | printk("soundscape warning: incorrect codec port specified\n"); | ||
1150 | goto fail; | ||
1151 | } | ||
1152 | d = 0x10 | (sscape_read(devc, 9) & 0xCF); | ||
1153 | sscape_write(devc, 9, d); | ||
1154 | sscape_write(devc, 6, 0x80); | ||
1155 | } else { | ||
1156 | //todo: check codec is not base + 8 | ||
1157 | } | ||
1158 | |||
1159 | d = (sscape_read(devc, 9) & 0x3F) | 0xC0; | ||
1160 | sscape_write(devc, 9, d); | ||
1161 | |||
1162 | for (i = 0; i < 550000; i++) | ||
1163 | if ( !(inb(devc -> codec) & 0x80) ) break; | ||
1164 | |||
1165 | d = inb(devc -> codec); | ||
1166 | if (d & 0x80) | ||
1167 | goto fail; | ||
1168 | if ( inb(devc -> codec + 2) == 0xFF) | ||
1169 | goto fail; | ||
1170 | |||
1171 | sscape_write(devc, 9, sscape_read(devc, 9) & 0x3F ); | ||
1172 | |||
1173 | d = inb(devc -> codec) & 0x80; | ||
1174 | if ( d == 0) { | ||
1175 | printk(KERN_INFO "soundscape: hardware detected\n"); | ||
1176 | valid_interrupts = valid_interrupts_new; | ||
1177 | } else { | ||
1178 | printk(KERN_INFO "soundscape: board looks like media fx\n"); | ||
1179 | valid_interrupts = valid_interrupts_old; | ||
1180 | old_hardware = 1; | ||
1181 | } | ||
1182 | |||
1183 | sscape_write( devc, 9, 0xC0 | (sscape_read(devc, 9) & 0x3F) ); | ||
1184 | |||
1185 | for (i = 0; i < 550000; i++) | ||
1186 | if ( !(inb(devc -> codec) & 0x80)) | ||
1187 | break; | ||
1188 | |||
1189 | sscape_pnp_init_hw(devc); | ||
1190 | |||
1191 | for (i = 0; i < 4; i++) | ||
1192 | { | ||
1193 | if (devc->codec_irq == valid_interrupts[i]) { | ||
1194 | irq_bits = i; | ||
1195 | break; | ||
1196 | } | ||
1197 | } | ||
1198 | sscape_write(devc, GA_INTENA_REG, 0x00); | ||
1199 | sscape_write(devc, GA_DMACFG_REG, 0x50); | ||
1200 | sscape_write(devc, GA_DMAA_REG, 0x70); | ||
1201 | sscape_write(devc, GA_DMAB_REG, 0x20); | ||
1202 | sscape_write(devc, GA_INTCFG_REG, 0xf0); | ||
1203 | sscape_write(devc, GA_CDCFG_REG, 0x89 | (devc->dma << 4) | (irq_bits << 1)); | ||
1204 | |||
1205 | sscape_pnp_write_codec( devc, 0, sscape_pnp_read_codec( devc, 0) | 0x20); | ||
1206 | sscape_pnp_write_codec( devc, 0, sscape_pnp_read_codec( devc, 1) | 0x20); | ||
1207 | |||
1208 | return 1; | ||
1209 | fail: | ||
1210 | release_region(devc->codec, 2); | ||
1211 | return 0; | ||
1212 | } | ||
1213 | |||
1214 | static int __init probe_sscape(struct address_info *hw_config) | ||
1215 | { | ||
1216 | devc->base = hw_config->io_base; | ||
1217 | devc->irq = hw_config->irq; | ||
1218 | devc->dma = hw_config->dma; | ||
1219 | devc->osp = hw_config->osp; | ||
1220 | |||
1221 | #ifdef SSCAPE_DEBUG1 | ||
1222 | /* | ||
1223 | * Temporary debugging aid. Print contents of the registers before | ||
1224 | * changing them. | ||
1225 | */ | ||
1226 | { | ||
1227 | int i; | ||
1228 | |||
1229 | for (i = 0; i < 13; i++) | ||
1230 | printk("I%d = %02x (old value)\n", i, sscape_read(devc, i)); | ||
1231 | } | ||
1232 | #endif | ||
1233 | devc->failed = 1; | ||
1234 | |||
1235 | sscape_ports = request_region(devc->base, 2, "mpu401"); | ||
1236 | if (!sscape_ports) | ||
1237 | return 0; | ||
1238 | |||
1239 | if (!request_region(devc->base + 2, 6, "SoundScape")) { | ||
1240 | release_region(devc->base, 2); | ||
1241 | return 0; | ||
1242 | } | ||
1243 | |||
1244 | if (!detect_ga(devc)) { | ||
1245 | if (detect_sscape_pnp(devc)) | ||
1246 | return 1; | ||
1247 | release_region(devc->base, 2); | ||
1248 | release_region(devc->base + 2, 6); | ||
1249 | return 0; | ||
1250 | } | ||
1251 | |||
1252 | if (old_hardware) /* Check that it's really an old Spea/Reveal card. */ | ||
1253 | { | ||
1254 | unsigned char tmp; | ||
1255 | int cc; | ||
1256 | |||
1257 | if (!((tmp = sscape_read(devc, GA_HMCTL_REG)) & 0xc0)) | ||
1258 | { | ||
1259 | sscape_write(devc, GA_HMCTL_REG, tmp | 0x80); | ||
1260 | for (cc = 0; cc < 200000; ++cc) | ||
1261 | inb(devc->base + ODIE_ADDR); | ||
1262 | } | ||
1263 | } | ||
1264 | return 1; | ||
1265 | } | ||
1266 | |||
1267 | static int __init init_ss_ms_sound(struct address_info *hw_config) | ||
1268 | { | ||
1269 | int i, irq_bits = 0xff; | ||
1270 | int ad_flags = 0; | ||
1271 | struct resource *ports; | ||
1272 | |||
1273 | if (devc->failed) | ||
1274 | { | ||
1275 | printk(KERN_ERR "soundscape: Card not detected\n"); | ||
1276 | return 0; | ||
1277 | } | ||
1278 | if (devc->ok == 0) | ||
1279 | { | ||
1280 | printk(KERN_ERR "soundscape: Invalid initialization order.\n"); | ||
1281 | return 0; | ||
1282 | } | ||
1283 | for (i = 0; i < 4; i++) | ||
1284 | { | ||
1285 | if (hw_config->irq == valid_interrupts[i]) | ||
1286 | { | ||
1287 | irq_bits = i; | ||
1288 | break; | ||
1289 | } | ||
1290 | } | ||
1291 | if (irq_bits == 0xff) { | ||
1292 | printk(KERN_ERR "soundscape: Invalid MSS IRQ%d\n", hw_config->irq); | ||
1293 | return 0; | ||
1294 | } | ||
1295 | |||
1296 | if (old_hardware) | ||
1297 | ad_flags = 0x12345677; /* Tell that we may have a CS4248 chip (Spea-V7 Media FX) */ | ||
1298 | else if (sscape_is_pnp) | ||
1299 | ad_flags = 0x87654321; /* Tell that we have a soundscape pnp with 1845 chip */ | ||
1300 | |||
1301 | ports = request_region(hw_config->io_base, 4, "ad1848"); | ||
1302 | if (!ports) { | ||
1303 | printk(KERN_ERR "soundscape: ports busy\n"); | ||
1304 | return 0; | ||
1305 | } | ||
1306 | |||
1307 | if (!ad1848_detect(ports, &ad_flags, hw_config->osp)) { | ||
1308 | release_region(hw_config->io_base, 4); | ||
1309 | return 0; | ||
1310 | } | ||
1311 | |||
1312 | if (!sscape_is_pnp) /*pnp is already setup*/ | ||
1313 | { | ||
1314 | /* | ||
1315 | * Setup the DMA polarity. | ||
1316 | */ | ||
1317 | sscape_write(devc, GA_DMACFG_REG, 0x50); | ||
1318 | |||
1319 | /* | ||
1320 | * Take the gate-array off of the DMA channel. | ||
1321 | */ | ||
1322 | sscape_write(devc, GA_DMAB_REG, 0x20); | ||
1323 | |||
1324 | /* | ||
1325 | * Init the AD1848 (CD-ROM) config reg. | ||
1326 | */ | ||
1327 | sscape_write(devc, GA_CDCFG_REG, 0x89 | (hw_config->dma << 4) | (irq_bits << 1)); | ||
1328 | } | ||
1329 | |||
1330 | if (hw_config->irq == devc->irq) | ||
1331 | printk(KERN_WARNING "soundscape: Warning! The WSS mode can't share IRQ with MIDI\n"); | ||
1332 | |||
1333 | hw_config->slots[0] = ad1848_init( | ||
1334 | sscape_is_pnp ? "SoundScape" : "SoundScape PNP", | ||
1335 | ports, | ||
1336 | hw_config->irq, | ||
1337 | hw_config->dma, | ||
1338 | hw_config->dma, | ||
1339 | 0, | ||
1340 | devc->osp, | ||
1341 | THIS_MODULE); | ||
1342 | |||
1343 | |||
1344 | if (hw_config->slots[0] != -1) /* The AD1848 driver installed itself */ | ||
1345 | { | ||
1346 | audio_devs[hw_config->slots[0]]->coproc = &sscape_coproc_operations; | ||
1347 | devc->codec_audiodev = hw_config->slots[0]; | ||
1348 | devc->my_audiodev = hw_config->slots[0]; | ||
1349 | |||
1350 | /* Set proper routings here (what are they) */ | ||
1351 | AD1848_REROUTE(SOUND_MIXER_LINE1, SOUND_MIXER_LINE); | ||
1352 | } | ||
1353 | |||
1354 | #ifdef SSCAPE_DEBUG5 | ||
1355 | /* | ||
1356 | * Temporary debugging aid. Print contents of the registers | ||
1357 | * after the AD1848 device has been initialized. | ||
1358 | */ | ||
1359 | { | ||
1360 | int i; | ||
1361 | |||
1362 | for (i = 0; i < 13; i++) | ||
1363 | printk("I%d = %02x\n", i, sscape_read(devc, i)); | ||
1364 | } | ||
1365 | #endif | ||
1366 | return 1; | ||
1367 | } | ||
1368 | |||
1369 | static void __exit unload_sscape(struct address_info *hw_config) | ||
1370 | { | ||
1371 | release_region(devc->base + 2, 6); | ||
1372 | unload_mpu401(hw_config); | ||
1373 | if (sscape_is_pnp) | ||
1374 | release_region(devc->codec, 2); | ||
1375 | } | ||
1376 | |||
1377 | static void __exit unload_ss_ms_sound(struct address_info *hw_config) | ||
1378 | { | ||
1379 | ad1848_unload(hw_config->io_base, | ||
1380 | hw_config->irq, | ||
1381 | devc->dma, | ||
1382 | devc->dma, | ||
1383 | 0); | ||
1384 | sound_unload_audiodev(hw_config->slots[0]); | ||
1385 | } | ||
1386 | |||
1387 | static struct address_info cfg; | ||
1388 | static struct address_info cfg_mpu; | ||
1389 | |||
1390 | static int __initdata spea = -1; | ||
1391 | static int mss = 0; | ||
1392 | static int __initdata dma = -1; | ||
1393 | static int __initdata irq = -1; | ||
1394 | static int __initdata io = -1; | ||
1395 | static int __initdata mpu_irq = -1; | ||
1396 | static int __initdata mpu_io = -1; | ||
1397 | |||
1398 | module_param(dma, int, 0); | ||
1399 | module_param(irq, int, 0); | ||
1400 | module_param(io, int, 0); | ||
1401 | module_param(spea, int, 0); /* spea=0/1 set the old_hardware */ | ||
1402 | module_param(mpu_irq, int, 0); | ||
1403 | module_param(mpu_io, int, 0); | ||
1404 | module_param(mss, int, 0); | ||
1405 | |||
1406 | static int __init init_sscape(void) | ||
1407 | { | ||
1408 | printk(KERN_INFO "Soundscape driver Copyright (C) by Hannu Savolainen 1993-1996\n"); | ||
1409 | |||
1410 | cfg.irq = irq; | ||
1411 | cfg.dma = dma; | ||
1412 | cfg.io_base = io; | ||
1413 | |||
1414 | cfg_mpu.irq = mpu_irq; | ||
1415 | cfg_mpu.io_base = mpu_io; | ||
1416 | /* WEH - Try to get right dma channel */ | ||
1417 | cfg_mpu.dma = dma; | ||
1418 | |||
1419 | devc->codec = cfg.io_base; | ||
1420 | devc->codec_irq = cfg.irq; | ||
1421 | devc->codec_type = 0; | ||
1422 | devc->ic_type = 0; | ||
1423 | devc->raw_buf = NULL; | ||
1424 | spin_lock_init(&devc->lock); | ||
1425 | |||
1426 | if (cfg.dma == -1 || cfg.irq == -1 || cfg.io_base == -1) { | ||
1427 | printk(KERN_ERR "DMA, IRQ, and IO port must be specified.\n"); | ||
1428 | return -EINVAL; | ||
1429 | } | ||
1430 | |||
1431 | if (cfg_mpu.irq == -1 && cfg_mpu.io_base != -1) { | ||
1432 | printk(KERN_ERR "MPU_IRQ must be specified if MPU_IO is set.\n"); | ||
1433 | return -EINVAL; | ||
1434 | } | ||
1435 | |||
1436 | if(spea != -1) { | ||
1437 | old_hardware = spea; | ||
1438 | printk(KERN_INFO "Forcing %s hardware support.\n", | ||
1439 | spea?"new":"old"); | ||
1440 | } | ||
1441 | if (probe_sscape(&cfg_mpu) == 0) | ||
1442 | return -ENODEV; | ||
1443 | |||
1444 | attach_sscape(&cfg_mpu); | ||
1445 | |||
1446 | mss = init_ss_ms_sound(&cfg); | ||
1447 | |||
1448 | return 0; | ||
1449 | } | ||
1450 | |||
1451 | static void __exit cleanup_sscape(void) | ||
1452 | { | ||
1453 | if (mss) | ||
1454 | unload_ss_ms_sound(&cfg); | ||
1455 | unload_sscape(&cfg_mpu); | ||
1456 | } | ||
1457 | |||
1458 | module_init(init_sscape); | ||
1459 | module_exit(cleanup_sscape); | ||
1460 | |||
1461 | #ifndef MODULE | ||
1462 | static int __init setup_sscape(char *str) | ||
1463 | { | ||
1464 | /* io, irq, dma, mpu_io, mpu_irq */ | ||
1465 | int ints[6]; | ||
1466 | |||
1467 | str = get_options(str, ARRAY_SIZE(ints), ints); | ||
1468 | |||
1469 | io = ints[1]; | ||
1470 | irq = ints[2]; | ||
1471 | dma = ints[3]; | ||
1472 | mpu_io = ints[4]; | ||
1473 | mpu_irq = ints[5]; | ||
1474 | |||
1475 | return 1; | ||
1476 | } | ||
1477 | |||
1478 | __setup("sscape=", setup_sscape); | ||
1479 | #endif | ||
1480 | MODULE_LICENSE("GPL"); | ||